-
AuthorSearch Results
-
April 26, 2023 at 4:58 pm #105471
In reply to: GTK issue – Can’t run synaptic
Member
dukester
Thx Sybok for your reply!
apt-cache policy synaptic
synaptic:
Installed: 0.90.2+antix1
Candidate: 0.90.2+antix1
Version table:
*** 0.90.2+antix1 500
500 http://ftp.cc.uoc.gr/mirrors/linux/mx/antix/buster buster/main amd64 Packages
100 /var/lib/dpkg/status
0.84.6 500
500 http://debian.otenet.gr/debian buster/main amd64 Packagesinxi -r
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://ftp.cc.uoc.gr/mirrors/linux/mx/antix/buster/ buster main nonfree nosystemd
No active apt repos in: /etc/apt/sources.list.d/balena-etcher.list
No active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list
Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
1: deb http://deb.debian.org/debian/ buster-backports main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/crystal.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://debian.otenet.gr/debian/ buster non-free contrib main
2: deb http://security.debian.org/ buster/updates non-free contrib main
No active apt repos in: /etc/apt/sources.list.d/miktex.list
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/smlsharp.list
No active apt repos in: /etc/apt/sources.list.d/various.listI looked at the log file. The only recent entry that might have caused the issue was a recent icewm update/upgrade. How would I downgrade that culprit?
--
dukesterApril 24, 2023 at 4:35 am #105313In reply to: Upgrading antiX – don’ts
Memberscruffyeagle
I have an installation of antiX-21 on an old Dell laptop. It’s had the problem of conky getting wiped off the screen, as soon as the Veracrypt window closes. (This problam hasn’t occurred in my installations of antix-19 &/or antix-22.) I was hoping to avoid doing a full install of antiX-22, and thought that perhaps doing an upgrade from a21 to a22 would fix it…
I used the code “sudo apt update && sudo apt dist-upgrade” in a terminal.
Afterward, I used “inxi -Fxxxrz” to verify whether or not the installation had been upgraded. It appears as if it was NOT, because the OS is still being reported as “antix-21_x64-full”, and the problem with conky being wiped off the screen is still continuing.
Here’s the output of “inxi -Fxxxrz”:
—————————————-$ inxi -Fxxxrz
System:
Kernel: 5.10.57-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc
v: 10.2.1 Desktop: IceWM v: 3.3.3 vt: 7 dm: slimski v: 1.5.0
Distro: antiX-21_x64-full Grup Yorum 31 October 2021 base: Debian
GNU/Linux 11 (bullseye)
Machine:
Type: Portable System: Dell product: Precision M6300 v: N/A
serial: <superuser required> Chassis: type: 8 serial: <superuser required>
Mobo: Dell model: 0JM680 serial: <superuser required> BIOS: Dell v: A14
date: 12/06/2011
Battery:
ID-1: BAT0 charge: 37.3 Wh (100.0%) condition: 37.3/73.3 Wh (50.9%)
volts: 12.4 min: 11.1 model: PS2 DELL 00 type: Li-ion serial: <filter>
status: full
CPU:
Info: dual core model: Intel Core2 Duo T7250 bits: 64 type: MCP
smt: <unsupported> arch: Core2 Merom rev: D cache: L1: 128 KiB L2: 2 MiB
Speed (MHz): avg: 1545 high: 1880 min/max: 800/2001 boost: enabled cores:
1: 1880 2: 1210 bogomips: 7977
Flags: ht lm nx pae sse sse2 sse3 ssse3
Graphics:
Device-1: NVIDIA G84GLM [Quadro FX 1600M] vendor: Dell driver: nouveau
v: kernel arch: Tesla pcie: speed: 2.5 GT/s lanes: 16 ports: active: LVDS-1
empty: DVI-D-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:040d class-ID: 0300
temp: 71.0 C
Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1400×900 s-dpi: 96 s-size: 369x237mm (14.53×9.33″)
s-diag: 439mm (17.27″)
Monitor-1: LVDS-1 model: Seiko Epson 0x3155 res: 1400×900 hz: 60 dpi: 97
size: 367x230mm (14.45×9.06″) diag: 433mm (17.1″) modes: max: 1920×1200
min: 640×350
API: OpenGL v: 3.3 Mesa 20.3.5 renderer: NV84 direct-render: Yes
Audio:
Device-1: Intel 82801H HD Audio vendor: Dell driver: snd_hda_intel v: kernel
bus-ID: 00:1b.0 chip-ID: 8086:284b class-ID: 0403
Sound API: ALSA v: k5.10.57-antix.1-amd64-smp running: yes
Network:
Device-1: Broadcom NetXtreme BCM5756ME Gigabit Ethernet PCI Express
vendor: Dell driver: tg3 v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: N/A
bus-ID: 09:00.0 chip-ID: 14e4:1674 class-ID: 0200
IF: eth1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.2 TiB used: 301.68 GiB (24.5%)
ID-1: /dev/sda vendor: Western Digital model: WD3200BPVT-75JJ5T0
size: 298.09 GiB speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter>
rev: 1A03 scheme: MBR
ID-2: /dev/sdb type: USB vendor: Western Digital
model: WD My Passport 0748 size: 931.48 GiB type: N/A serial: <filter>
rev: 1019 scheme: MBR
Partition:
ID-1: / size: 38.15 GiB used: 9.62 GiB (25.2%) fs: ext4 dev: /dev/sda6
Swap:
ID-1: swap-1 type: partition size: 9.77 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda5
Sensors:
System Temperatures: cpu: 61.0 C mobo: N/A sodimm: SODIMM C gpu: nouveau
temp: 71.0 C
Fan Speeds (RPM): cpu: 0
Repos:
Packages: pm: dpkg pkgs: 1978
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye bullseye main nosystemd nonfree
Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list
1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.us.debian.org/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.us.debian.org/debian/ bullseye main contrib non-free
2: deb http://security.debian.org/ bullseye-security main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info:
Processes: 164 Uptime: 1h 21m wakeups: 2 Memory: 3.84 GiB
used: 726.6 MiB (18.5%) Init: SysVinit v: 2.96 runlevel: 5 default: 5
Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4 running-in: roxterm
inxi: 3.3.25
spirit@M6300A214:~
$April 15, 2023 at 8:25 am #104730In reply to: Bewildered, Drifting MOUSE on Antix 22
Member
flyingchap
Hi Punranger, thank you for responding so quickly.
Re kernel alternatives — no I haven’t, but only because you’re already over my head with that, a little: I’m pretty experienced with Linux in general, and on a range of distros, but I have always “swerved” ‘messing with kernels’ as I’ve always assumed that would take me into deep territory I’m not familiar with and would soon break something.
**BUT am happy to try it if you can describe how to do it ? By all means please tell me the commands. [ As I mentoned I have Antix 19 on hand on same machine, in case relevant.]
Re you mentioning experts, any mouse-driver specialist wisdom would also be appreciated — some of the debate in that ARCH forum I mentioned, had very knowledgeable types seeming to be using obscure commands to read real-time event logs of the mouse drivers and the like so see what they’re doing.. quite deep stuff. I don’t know if all distrols handle mice the same way, or if kernel differences can mean whole different driver setups. There seemed to be talk there of default drivers or overriding installer drivers etc and config associated, but as I said they aborted the dialogue before it was resolved. Sounded V similar to what I’m seeing.
Just to add one bit of detail – at the heart of this effect, seems to be a “lag on mouse command”, in that as well as mouse movement variability, I find the left-click always seems to contain a small but significant, DELAY: if I click to (for example) put cursor on a given row of a document – it will always go there, but about ~~ 0.8 sec AFTER I click, not when I click. It’s so consistent that I’ve now started to autoadjust to it an instinctively “wait a moment” after such a moment before typing. SAME, when clicking to move focus – to move from a Console window to an application window for example. And all this happens on a nice fast i5 (which if i reboot to Antix 19 is PERFECT).
IN THE MEANWHILE – output from the command you mentioned – thank you for that I’ve not met that command before..:
$ inxi -zrv7 System: Kernel: 4.9.0-326-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: IceWM v: 3.0.1 dm: slimski v: 1.5.0 Distro: antiX-22_x64-base Grup Yorum 19 October 2022 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: LENOVO product: 3680FBG v: ThinkPad X201 serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: LENOVO model: 3680FBG serial: <superuser required> BIOS: LENOVO v: 6QET64WW (1.34 ) date: 02/24/2011 Battery: ID-1: BAT0 charge: 2.5 Wh (100.0%) condition: 2.5/62.2 Wh (4.1%) volts: 12.5 min: 11.1 model: SANYO 42T4835 type: Li-ion serial: <filter> status: N/A Memory: RAM: total: 3.73 GiB used: 980.4 MiB (25.7%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: dual core model: Intel Core i5 M 520 bits: 64 type: MT MCP smt: enabled arch: Westmere rev: 5 cache: L1: 128 KiB L2: 512 KiB L3: 3 MiB Speed (MHz): avg: 1699 high: 2400 min/max: 1199/2400 boost: enabled cores: 1: 1199 2: 1199 3: 2400 4: 1999 bogomips: 19151 Flags: acpi aes aperfmperf apic arat arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts ept est flexpriority flush_l1d fpu fxsr ht ibpb ibrs ida kaiser lahf_lm lm mca mce mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pebs pge pni popcnt pse pse36 rdtscp rep_good sep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr Graphics: Device-1: Intel Core Processor Integrated Graphics vendor: Lenovo driver: i915 v: kernel arch: Gen5.75 ports: active: LVDS-1,VGA-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:0046 class-ID: 0300 Device-2: Lenovo Integrated Webcam type: USB driver: uvcvideo bus-ID: 1-1.6:5 chip-ID: 17ef:4816 class-ID: 0e02 Display: server: X.Org v: 1.20.11 driver: X: loaded: intel gpu: i915 display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 3200x1080 s-dpi: 96 s-size: 846x285mm (33.31x11.22") s-diag: 893mm (35.15") Monitor-1: LVDS-1 mapped: LVDS1 pos: primary,left model: Lenovo 0x4011 res: 1280x800 hz: 60 dpi: 125 size: 261x163mm (10.28x6.42") diag: 308mm (12.1") modes: 1280x800 Monitor-2: VGA-1 mapped: VGA1 pos: right model: AOC F22 serial: <filter> res: 1920x1080 hz: 60 dpi: 102 size: 476x268mm (18.74x10.55") diag: 537mm (21.1") modes: max: 1920x1080 min: 640x480 OpenGL: renderer: Mesa DRI Intel HD Graphics (ILK) v: 2.1 Mesa 20.3.5 direct render: Yes Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Lenovo 5 driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: 0403 Sound Server-1: ALSA v: k4.9.0-326-antix.1-amd64-smp running: yes Sound Server-2: PulseAudio v: 14.2 running: no Network: Device-1: Intel 82577LM Gigabit Network vendor: Lenovo driver: e1000e v: 3.2.6-k port: 1820 bus-ID: 00:19.0 chip-ID: 8086:10ea class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Intel Centrino Advanced-N 6200 driver: N/A bus-ID: 02:00.0 chip-ID: 8086:4239 class-ID: 0280 Device-3: TP-Link TL-WN823N v2/v3 [Realtek RTL8192EU] type: USB driver: rtl8192eu bus-ID: 1-1.1:3 chip-ID: 2357:0109 class-ID: 0000 serial: <filter> IF: wlan1 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 465.76 GiB used: 297.72 GiB (63.9%) ID-1: /dev/sda vendor: Seagate model: ST500LT012-1DG142 size: 465.76 GiB speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: SDM1 scheme: MBR Message: No optical or floppy data found. Partition: ID-1: / size: 91.11 GiB used: 17.59 GiB (19.3%) fs: ext4 dev: /dev/sda7 label: rootantiX22 uuid: 320500d3-4234-46ac-bce0-480f6bd19335 ID-2: /media/240GB size: 219.9 GiB used: 198.02 GiB (90.1%) fs: ext4 dev: /dev/sda4 label: 240GB uuid: dcca6886-267c-4543-be7e-e0ca4fb866a7 ID-3: /media/Windows size: 83.06 GiB used: 82.11 GiB (98.9%) fs: ntfs dev: /dev/sda2 label: Windows uuid: B272B58272B54C3B ID-4: /media/mikeh/dell830_DATA size: 245.59 GiB used: 241.07 GiB (98.2%) fs: cifs dev: /dev/DELLac03_DATA Swap: ID-1: swap-1 type: partition size: 1.85 GiB used: 0 KiB (0.0%) priority: -1 dev: /dev/sda6 label: N/A uuid: e3899b21-925c-4c3d-827a-73b0dab729d5 Unmounted: ID-1: /dev/sda1 size: 5.85 GiB fs: ntfs label: System uuid: ECFCB367FCB32B2A ID-2: /dev/sda3 size: 1 KiB fs: <superuser required> label: N/A uuid: N/A ID-3: /dev/sda5 size: 58.28 GiB fs: ext4 label: N/A uuid: a279d843-62f3-45a8-ba93-160d71a20732 USB: Hub-1: 1-0:1 info: Full speed or root hub ports: 3 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 8087:0020 class-ID: 0900 Device-1: 1-1.1:3 info: TP-Link TL-WN823N v2/v3 [Realtek RTL8192EU] type: Network driver: rtl8192eu interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 2357:0109 class-ID: 0000 serial: <filter> Device-2: 1-1.3:4 info: Upek Biometric Touchchip/Touchstrip Fingerprint Sensor type: <vendor specific> driver: N/A interfaces: 1 rev: 1.0 speed: 12 Mb/s power: 100mA chip-ID: 147e:2016 class-ID: 0000 Device-3: 1-1.6:5 info: Lenovo Integrated Webcam type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 200mA chip-ID: 17ef:4816 class-ID: 0e02 Hub-3: 2-0:1 info: Full speed or root hub ports: 3 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip-ID: 8087:0020 class-ID: 0900 Device-1: 2-1.2:3 info: HP HP 1000 USB Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 03f0:2a41 class-ID: 0301 Sensors: System Temperatures: cpu: 67.0 C mobo: 0.0 C Fan Speeds (RPM): cpu: 3494 Repos: Packages: apt: 1506 Active apt repos in: /etc/apt/sources.list.d/alessandro-strada-ubuntu-ppa-bionic.list 1: deb http://ppa.launchpad.net/alessandro-strada/ppa/ubuntu xenial main 2: deb-src http://ppa.launchpad.net/alessandro-strada/ppa/ubuntu xenial main Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye/ bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http://deb.debian.org/debian/ bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.us.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.us.debian.org/debian/ bullseye main contrib non-free 2: deb http://security.debian.org/ bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main Active apt repos in: /etc/apt/sources.list.d/teams.list 1: deb [arch=amd64] https://packages.microsoft.com/repos/ms-teams stable main No active apt repos in: /etc/apt/sources.list.d/various.list Info: Processes: 181 Uptime: 1h 15m wakeups: 3 Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4 running-in: roxterm inxi: 3.3.19 mikeh@antix22-X201:~THANK YOU – ALL ADVICE MUCH APPRECIATED.
April 14, 2023 at 11:29 pm #104722In reply to: Window of App Select
MemberRobin
I tried on two PC’s(laptop and desktop).
But sadnely nothing changed in my system environments.This is really strange. For me the ampersand method works on two different hardware machines and two different antiX versions, two different kernels:
Without ampersand, shot taken after moving around the windows:

Ampersand added, shot taken after moving around the windows:

So maybe this is a question of localisation? My testings were done on „de” localised systems, and the ampersand works also on a live system booted to English language. So the question is:
Does the issue show up for you still when adding the ampersand on an antiX 22 or 23 full, live booted to English language?
Did you restart app-select after modifying the line in its config?
Another chance is to modify the line as follows:
Open in leafpad|coproc leafpad %pThis should be enough already, but:
Since app-select wouldn’t accept the default bash builtin „coproc” for some strange reason, if it is filed literally instead of the ampersand, you’ll need to apply additionally the following dirty hack:
Create a text file /usr/lib/app-select/plugins/coproc and enter the following lines. Make sure to have an additional empty line at the end of the file.
#!/bin/bash coproc "$@"Then set it’s permissions the way they are needed:
sudo chmod 755 '/usr/lib/app-select/plugins/coproc'(711 is NOT sufficient, on contrary to what the info text found in app-select.conf reads, the file isn’t executed with 711 for some strange reason)
This script will simply hand over the coproc instruction to bash, a simple task app-select should have done already on its own.
Make sure app-select was closed and restarted completely after these modificatons.
The Ampersand and the literal coproc method do work both for me on the two antiX machines, antiX 22 and antiX 23:
inxi…
System: Kernel: 5.19.0-0.deb11.2-686-pae arch: i686 bits: 32 compiler: gcc v: 10.2.1 parameters: lang=de_DE tz=Europe/Berlin quiet splasht disable=lxF Desktop: IceWM v: 3.3.1 wm: Blackbox dm: slimski v: 1.5.0 Distro: antiX-21_386-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: <superuser required> Chassis: No Enclosure type: 1 serial: <superuser required> Mobo: Notebook model: RIM2000 serial: <superuser required> BIOS: Phoenix v: RIM00F0A date: 05/27/2005 Battery: ID-1: BAT0 charge: 60.7 Wh (100.0%) condition: 60.7/65.1 Wh (93.2%) volts: 16.7 min: 14.8 model: ARIMA LI4403A type: Unknown serial: <filter> status: full Memory: RAM: total: 1.96 GiB used: 1.33 GiB (67.7%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Info: model: Intel Pentium M bits: 32 arch: M Dothan built: 2003-05 process: Intel 90nm family: 6 model-id: 0xD (13) stepping: 8 microcode: 0x20 Topology: cpus: 1x cores: 1 smt: <unsupported> cache: 2 MiB note: check Speed (MHz): 800 min/max: 800/1733 scaling: driver: acpi-cpufreq governor: schedutil core: 1: 800 bogomips: 3457 Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae pbe pge pse pti sep ss sse sse2 tm tm2 tsc vme Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported Type: l1tf mitigation: PTE Inversion Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled Type: meltdown mitigation: PTI Type: mmio_stale_data status: Unknown: No mitigations Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: nouveau v: kernel non-free: series: 304.xx status: legacy (EOL) last: release: 304.137 kernel: 4.13 xorg: 1.19 arch: Curie process: 90-130nm built: 2003-13 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: LVDS-1 empty: TV-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:0148 class-ID: 0300 Display: server: X.Org v: 1.20.11 driver: X: loaded: nouveau unloaded: fbdev,modesetting,vesa alternate: nv gpu: nouveau display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 380x238mm (14.96x9.37") s-diag: 448mm (17.65") Monitor-1: LVDS-1 model: Seiko Epson 0x3847 built: 2006 res: 1440x900 hz: 60 dpi: 100 gamma: 1.2 chroma: red: x: 0.580 y: 0.341 green: x: 0.310 y: 0.549 blue: x: 0.153 y: 0.153 white: x: 0.314 y: 0.329 size: 367x230mm (14.45x9.06") diag: 433mm (17.1") ratio: 16:10 modes: 1440x900, 1152x864, 1024x768, 800x600, 640x480, 720x400, 640x400, 640x350 OpenGL: renderer: NV43 v: 2.1 Mesa 20.3.5 direct render: Yes Audio: Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403 Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation driver: saa7134 v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480 Sound Server-1: ALSA v: k5.19.0-0.deb11.2-686-pae running: yes Network: Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280 IF: eth1 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 151.75 GiB used: 83.79 GiB (55.2%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A size: 93.16 GiB block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 3.02 scheme: MBR ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 8.01 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) used: 9.04 GiB (15.7%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb uuid: 862f493d-6951-444f-a3f6-734244b241e7 ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 5.4 MiB (11.1%) fs: vfat dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) used: 34.87 GiB (83.7%) fs: ext3 dev: /dev/sda7 maj-min: 8:7 label: /daten3 uuid: c1bc867a-ec28-436d-831b-e47f334471ce ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) fs: ext3 dev: /dev/sda8 maj-min: 8:8 label: /daten4 uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) fs: ext3 dev: /dev/sda5 maj-min: 8:5 label: /home uuid: 94021be3-c160-4166-a151-92ad72b26f9a ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 8.11 GiB (83.3%) fs: ext4 dev: /dev/sda6 maj-min: 8:6 label: antiX uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 6.54 GiB (83.9%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal uuid: 19eaea0e-493b-4007-8eff-f14aca40363f ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) fs: ext4 dev: /dev/sda10 maj-min: 8:10 label: N/A uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d ID-9: /mnt/192.168.178.24/Arbeitsordner on 192.168.178.24 raw-size: N/A size: 151.78 GiB used: 145.05 GiB (95.6%) fs: cifs dev: /dev/Arbeitsordner Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 2.16 GiB used: 367.9 MiB (16.6%) priority: -2 dev: /dev/sda9 maj-min: 8:9 label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: <superuser required> label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-2: 2-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 2-2:7 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 093a:2533 class-ID: 0300 Hub-3: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-4: 4-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 4-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 serial: <filter> Sensors: System Temperatures: cpu: 68.2 C mobo: 58.0 C Fan Speeds (RPM): N/A Repos: Packages: apt: 1882 lib: 894 Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http: //ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye/ bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http: //ftp.de.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http: //ftp.de.debian.org/debian/ bullseye main contrib non-free 2: deb http: //security.debian.org/ bullseye-security main contrib non-free No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 of 162 1: cpu: 26.0% command: yad pid: 3434 mem: 24.3 MiB (1.2%) 2: cpu: 1.5% command: app-select started by: python3 pid: 2396 mem: 47.7 MiB (2.3%) 3: cpu: 1.1% command: firefox-esr pid: 12989 mem: 451.1 MiB (22.4%) 4: cpu: 0.9% command: xorg pid: 32724 mem: 49.8 MiB (2.4%) 5: cpu: 0.8% command: gtkdialog pid: 3089 mem: 24.2 MiB (1.2%) Memory top: 5 of 162 1: mem: 451.1 MiB (22.4%) command: firefox-esr pid: 12989 cpu: 1.1% 2: mem: 117.2 MiB (5.8%) command: firefox-esr pid: 13088 cpu: 0.0% 3: mem: 94.4 MiB (4.6%) command: firefox-esr pid: 15790 cpu: 0.0% 4: mem: 88.4 MiB (4.3%) command: firefox-esr pid: 14815 cpu: 0.0% 5: mem: 87.5 MiB (4.3%) command: firefox-esr pid: 13125 cpu: 0.0% Info: Processes: 162 Uptime: 35d 19h 41m wakeups: 5 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.19System: Kernel: 6.1.10-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: lang=de_DE quiet splasht disable=lxF Desktop: IceWM v: 3.3.1 dm: slimski v: 1.5.0 Distro: antiX-23-runit_x64-full Grup Yorum 3 February 2023 base: Debian GNU/Linux bookworm/sid Machine: Type: Desktop Mobo: ASUSTeK model: P7P55-M v: Rev X.0x serial: <superuser required> BIOS: American Megatrends v: 0903 date: 07/09/2010 Battery: Device-1: hidpp_battery_0 model: Logitech MX Keys Wireless Keyboard serial: <filter> charge: Normal status: discharging Device-2: hidpp_battery_1 model: Logitech Marathon Mouse/Performance Plus M705 serial: <filter> charge: Normal status: discharging Memory: RAM: total: 7.76 GiB used: 7.15 GiB (92.1%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Info: model: Intel Core i3 540 bits: 64 type: MT MCP arch: Westmere gen: core 1 built: 2010-11 process: Intel 32nm family: 6 model-id: 0x25 (37) stepping: 5 microcode: 0x2 Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 4 MiB desc: 1x4 MiB Speed (MHz): avg: 1204 min/max: 1200/3067 scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1204 2: 1204 3: 1204 4: 1204 bogomips: 24618 Flags: acpi aperfmperf apic arat arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts ept est flexpriority fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pdcm pebs pge pni popcnt pse pse36 pti rdtscp rep_good sep sse sse2 sse4_1 sse4_2 ssse3 syscall tm tm2 tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable Type: meltdown mitigation: PTI Type: mmio_stale_data status: Unknown: No mitigations Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: AMD Cedar [Radeon HD 5000/6000/7350/8350 Series] vendor: ASUSTeK driver: radeon v: kernel alternate: amdgpu arch: TeraScale 2 code: Evergreen process: TSMC 32-40nm built: 2009-15 pcie: gen: 2 speed: 5 GT/s lanes: 16 ports: active: HDMI-A-1 empty: DVI-I-1,VGA-1 bus-ID: 01:00.0 chip-ID: 1002:68f9 class-ID: 0300 Display: server: X.Org v: 1.21.1.7 driver: X: loaded: radeon unloaded: fbdev,modesetting,vesa gpu: radeon display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 2048x1152 s-dpi: 96 s-size: 540x304mm (21.26x11.97") s-diag: 620mm (24.4") Monitor-1: HDMI-A-1 mapped: HDMI-0 model: PMO S321-IQSC serial: <filter> built: 2021 res: 2048x1152 hz: 60 dpi: 74 gamma: 1.2 chroma: red: x: 0.655 y: 0.337 green: x: 0.322 y: 0.612 blue: x: 0.153 y: 0.059 white: x: 0.314 y: 0.329 size: 700x390mm (27.56x15.35") diag: 801mm (31.5") ratio: 16:9 modes: 2048x1152, 1920x1200, 1920x1080, 1920x1080i, 1600x1200, 1680x1050, 1680x945, 1400x1050, 1600x900, 1280x1024, 1440x900, 1280x960, 1366x768, 1360x768, 1280x800, 1152x864, 1280x768, 1280x720, 1024x768, 1024x576, 832x624, 800x600, 720x576, 848x480, 720x480, 640x480, 720x400 OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 6.1.10-antix.1-amd64-smp LLVM 15.0.6) v: 4.5 Mesa 22.3.3 direct render: Yes Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: ASUSTeK 5 driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: 0403 Device-2: AMD Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 1002:aa68 class-ID: 0403 Sound Server-1: ALSA v: k6.1.10-antix.1-amd64-smp running: yes Sound Server-2: JACK v: 1.9.21 running: no Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK M4A785/P7P55 driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: c800 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 3.89 TiB used: 687.09 GiB (17.2%) ID-1: /dev/sda maj-min: 8:0 vendor: Maxtor model: STM3250318AS size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: CC38 scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: SMI (STMicroelectronics) model: USB DISK size: 29.49 GiB block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1100 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Toshiba model: EXTERNAL USB size: 3.64 TiB block-size: physical: 4096 B logical: 512 B type: N/A serial: <filter> rev: 5438 scheme: GPT SMART Message: A mandatory SMART command failed. Various possible causes. Message: No optical or floppy data found. Partition: ID-1: /live/boot-dev raw-size: 29.44 GiB size: 28.91 GiB (98.18%) used: 18.47 GiB (63.9%) fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb uuid: 76ca61e0-47f8-4075-8448-e28989c3b64e ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 12.3 MiB (25.4%) fs: vfat block-size: 512 B dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 2100-8C30 ID-3: /media/Robert/sdc1-usb-TOSHIBA_EXTERNAL raw-size: 3.64 TiB size: 3.58 TiB (98.40%) used: 519.48 GiB (14.2%) fs: ext4 block-size: 4096 B dev: /dev/sdc1 maj-min: 8:33 label: N/A uuid: ade4760b-84fb-4bcf-8de6-2071af30fe8d ID-4: /media/homeantiX raw-size: 49.02 GiB size: 47.95 GiB (97.82%) used: 1.38 GiB (2.9%) fs: ext4 block-size: 4096 B dev: /dev/sda3 maj-min: 8:3 label: homeantiX uuid: e1991eba-59bf-4106-8a46-09b3ee0e94af ID-5: /media/rootantiX21 raw-size: 24.43 GiB size: 23.88 GiB (97.74%) used: 6.59 GiB (27.6%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: rootantiX21 uuid: 9d2f9bb5-5d2f-4aad-96ed-12c96919bd8d ID-6: /media/sda4 raw-size: 155.27 GiB size: 151.78 GiB (97.75%) used: 137.28 GiB (90.4%) fs: ext4 block-size: 4096 B dev: /dev/sda4 maj-min: 8:4 label: N/A uuid: c48583c1-9e59-4d5b-9114-c6041479f9f7 Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 3.91 GiB used: 3.87 GiB (99.2%) priority: -2 dev: /dev/sda2 maj-min: 8:2 label: swapantiX uuid: 57ab2d2d-e0e9-49e6-b8d0-d8bea277cf7c Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 8087:0020 class-ID: 0900 Device-1: 1-1.1:30 info: Toshiba America MQ04UBF100 type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 0480:0900 class-ID: 0806 serial: <filter> Hub-3: 2-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip-ID: 8087:0020 class-ID: 0900 Device-1: 2-1.7:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA chip-ID: 046d:c52b class-ID: 0300 Hub-5: 2-1.8:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0608 class-ID: 0900 Device-1: 2-1.8.1:5 info: Silicon Motion - Taiwan (formerly Feiya ) USB DISK type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 090c:2000 class-ID: 0806 serial: <filter> Sensors: System Temperatures: cpu: 47.0 C mobo: 37.0 C gpu: radeon temp: 57.5 C Fan Speeds (RPM): cpu: 1480 case-1: 1259 Power: 12v: 12.26 5v: N/A 3.3v: 3.42 vbat: N/A Repos: Packages: apt: 2467 lib: 1287 Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http: //repo.antixlinux.com/testing testing main nonfree nosystemd Active apt repos in: /etc/apt/sources.list.d/bookworm-backports.list 1: deb http: //deb.debian.org/debian bookworm-backports main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http: //ftp.de.debian.org/debian/ bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http: //ftp.de.debian.org/debian/ bookworm main contrib non-free non-free-firmware 2: deb http: //security.debian.org/ bookworm-security main contrib non-free non-free-firmware 3: deb http: //ftp.de.debian.org/debian/ buster main contrib non-free non-free-firmware 4: deb http: //security.debian.org/ buster-security main contrib non-free non-free-firmware No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 of 327 1: cpu: 100% command: ps pid: 1281386 mem: 3.82 MiB (0.0%) 2: cpu: 38.0% command: yad pid: 1281352 mem: 31.2 MiB (0.3%) 3: cpu: 18.3% command: mpv pid: 1012863 mem: 514.1 MiB (6.4%) 4: cpu: 6.0% command: firefox-esr pid: 409502 mem: 717.1 MiB (9.0%) 5: cpu: 5.9% command: xorg pid: 318412 mem: 85.3 MiB (1.0%) Memory top: 5 of 327 1: mem: 717.1 MiB (9.0%) command: firefox-esr pid: 409502 cpu: 6.0% 2: mem: 514.1 MiB (6.4%) command: mpv pid: 1012863 cpu: 18.3% 3: mem: 391.2 MiB (4.9%) command: meld started by: python3 pid: 3926911 cpu: 0.3% 4: mem: 293.4 MiB (3.6%) command: zzzfm pid: 3746556 cpu: 0.4% 5: mem: 288.5 MiB (3.6%) command: firefox-esr pid: 545557 cpu: 0.1% Info: Processes: 327 Uptime: 34d 4h 4m wakeups: 6725 Init: runit v: N/A runlevel: 2 tool: service Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.19Hopefully you succeed also making it work properly on your devices. But in the end I reckon this is something which must be fixed in the app-select application.
Windows is like a submarine. Open a window and serious problems will start.
April 9, 2023 at 2:20 pm #104451In reply to: audio stuttering
Member
dukester
inxi -r
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://ftp.cc.uoc.gr/mirrors/linux/mx/antix/buster/ buster main nonfree nosystemd
No active apt repos in: /etc/apt/sources.list.d/balena-etcher.list
No active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list
Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
1: deb http://deb.debian.org/debian/ buster-backports main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://debian.otenet.gr/debian/ buster non-free contrib main
2: deb http://security.debian.org/ buster/updates non-free contrib main
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.listapt-cache policy python3
python3:
Installed: 3.9.2-3
Candidate: 3.9.2-3
Version table:
*** 3.9.2-3 100
100 /var/lib/dpkg/status
3.7.3-1 500
500 http://debian.otenet.gr/debian buster/main amd64 Packages--
dukesterApril 5, 2023 at 11:09 pm #104168In reply to: What are you “here” with today?
MemberTrashthrasher
`System:
Kernel: 6.1.18-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.18-antix.1-amd64-smp
root=UUID=181d69b5-f759-4d14-99e5-e5b97e71ffa4 ro quiet video=1920×1080
Desktop: IceWM v: 3.3.2 vt: 7 dm: slimski v: 1.5.0 Distro: antiX-22_x64-full Grup Yorum 18
October 2022 base: Debian GNU/Linux 11 (bullseye)
Machine:
Type: Desktop System: Hewlett-Packard product: HP Z400 Workstation v: N/A
serial: <superuser required> Chassis: type: 6 serial: <superuser required>
Mobo: Hewlett-Packard model: 0B4Ch v: D serial: <superuser required> BIOS: Hewlett-Packard
v: 786G3 v03.61 date: 03/05/2018
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard serial: <filter> charge: N/A
status: N/A
Device-2: hidpp_battery_1 model: Logitech Wireless Mouse serial: <filter> charge: Normal
status: discharging
Memory:
RAM: total: 15.61 GiB used: 1.36 GiB (8.7%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Xeon W3565 bits: 64 type: MT MCP arch: Nehalem level: v2 built: 2008-10
process: Intel 45nm family: 6 model-id: 0x1A (26) stepping: 5 microcode: 0x1D
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4×32 KiB; i-4×32 KiB L2: 1024 KiB desc: 4×256 KiB L3: 8 MiB desc: 1×8 MiB
Speed (MHz): avg: 2682 high: 3337 min/max: 1596/3193 boost: enabled scaling:
driver: acpi-cpufreq governor: schedutil cores: 1: 3337 2: 1596 3: 3334 4: 3334 5: 1596 6: 3334
7: 3334 8: 1596 bogomips: 51205
Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 dca de
ds_cpl dtes64 dtherm dts ept est flexpriority flush_l1d fpu fxsr ht ibpb ibrs ida lahf_lm lm
mca mce mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pdcm pebs pge pni popcnt pse
pse36 pti rdtscp rep_good sep ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2
tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA G94GL [Quadro FX 1800] driver: nouveau v: kernel non-free: series: 340.xx
status: legacy (EOL) last: release: 340.108 kernel: 5.4 xorg: 1.20 arch: Tesla process: 40-80nm
built: 2006-13 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: DP-1 empty: DP-2,DVI-I-1
bus-ID: 0f:00.0 chip-ID: 10de:0638 class-ID: 0300 temp: 54.0 C
Display: x11 server: X.Org v: 1.20.11 compositor: Picom v: 8.2 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920×1080 s-dpi: 96 s-size: 508x285mm (20.00×11.22″) s-diag: 582mm (22.93″)
Monitor-1: DP-1 model: HP E221i serial: <filter> built: 2015 res: 1920×1080 hz: 60 dpi: 102
gamma: 1.2 chroma: red: x: 0.651 y: 0.337 green: x: 0.318 y: 0.612 blue: x: 0.149 y: 0.063 white:
x: 0.314 y: 0.329 size: 477x268mm (18.78×10.55″) diag: 547mm (21.5″) ratio: 16:9
modes: 1920×1080, 1680×1050, 1600×900, 1280×1024, 1440×900, 1280×720, 1024×768, 800×600,
640×480, 720×400
API: OpenGL v: 3.3 Mesa 20.3.5 renderer: NV94 direct-render: Yes
Audio:
Device-1: Intel 82801JI HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
bus-ID: 00:1b.0 chip-ID: 8086:3a3e class-ID: 0403
Sound API: ALSA v: k6.1.18-antix.1-amd64-smp running: yes
Sound Server-1: PulseAudio v: 14.2 running: no
Network:
Device-1: Broadcom NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Hewlett-Packard driver: tg3
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 01:00.0 chip-ID: 14e4:1684
class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> scope: global
IP v6: <filter> type: dynamic mngtmpaddr scope: global
IP v6: <filter> scope: link
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 port: d0c0 bus-ID: 00:1f.2
chip-ID: 8086:2822 rev: class-ID: 0104
Drives:
Local Storage: total: 3.19 TiB used: 1.37 TiB (43.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WDS100T2B0A-00SM50 size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 00WD
scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: A-Data model: SU760 size: 476.94 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 4R23 scheme: MBR
ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Western Digital model: WD My Passport 0820
size: 1.82 TiB block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1007
scheme: MBR
Optical-1: /dev/sr0 vendor: hp model: DVD A DH16ABLH rev: 3HD9 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 40 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram
state: running
Partition:
ID-1: / raw-size: 923.5 GiB size: 907.93 GiB (98.31%) used: 22.39 GiB (2.5%) fs: ext4
dev: /dev/sda1 maj-min: 8:1 label: rootantiX22 uuid: 181d69b5-f759-4d14-99e5-e5b97e71ffa4
ID-2: /home/<filter>/pCloudDrive raw-size: N/A size: 2 TiB used: 1.26 TiB (63.0%) fs: fuse
source: ERR-102
ID-3: /media/dank/sdc1-usb-WD_My_Passport_0 raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 122.7 MiB (0.0%) fs: ntfs dev: /dev/sdc1 maj-min: 8:33 label: N/A uuid: 3E5BB57B043F4587
ID-4: /run/timeshift/backup raw-size: 476.94 GiB size: 468.39 GiB (98.21%)
used: 94.05 GiB (20.1%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: Timeshift
uuid: 3a83843b-21f9-4bcd-9125-053d9248bf39
Swap:
Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100)
ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
maj-min: 8:2 label: N/A uuid: 6a81be70-9c09-4f92-972b-4487a29e2d56
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 2-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002
class-ID: 0900
Hub-3: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
class-ID: 0900
Hub-4: 4-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
class-ID: 0900
Hub-5: 5-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
class-ID: 0900
Device-1: 5-1:2 info: Logitech Unifying Receiver type: Keyboard,Mouse
driver: logitech-djreceiver,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 98mA
chip-ID: 046d:c534 class-ID: 0301
Hub-6: 6-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
class-ID: 0900
Hub-7: 7-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
class-ID: 0900
Hub-8: 8-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
class-ID: 0900
Hub-9: 9-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-10: 9-2:2 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2822
class-ID: 0900
Hub-11: 10-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
class-ID: 0900
Hub-12: 10-2:2 info: VIA Labs USB3.1 Hub ports: 4 rev: 3.2 speed: 10 Gb/s chip-ID: 2109:0822
class-ID: 0900
Device-1: 10-2.2:3 info: Western Digital My Passport Ultra (WDBMWV WDBZFP) type: Mass Storage
driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 1058:0820
class-ID: 0806 serial: <filter>
Sensors:
System Temperatures: cpu: 52.2 C mobo: N/A gpu: nouveau temp: 55.0 C
Fan Speeds (RPM): cpu: 1731 fan-2: 0 fan-3: 0
Power: 12v: N/A 5v: N/A 3.3v: 3.29 vbat: N/A gpu: nouveau V: 1.05
Repos:
Packages: pm: dpkg pkgs: 2312 libs: 1126 tools: apt,apt-get,nala,synaptic
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http: //ftp.osuosl.org/pub/mxlinux/antix/bullseye/ bullseye main nosystemd nonfree
Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list
1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http: //debian.osuosl.org/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http: //debian.osuosl.org/debian/ bullseye main contrib non-free
2: deb http: //security.debian.org/ bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/nicotine-team-ubuntu-stable-lunar.list
1: deb http: //ppa.launchpad.net/nicotine-team/stable/ubuntu lunar main
Active apt repos in: /etc/apt/sources.list.d/spotify.list
1: deb http: //repository.spotify.com stable non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Active apt repos in: /etc/apt/sources.list.d/volian-archive-scar-unstable.list
1: deb [arch=amd64,arm64,armhf] http: //deb.volian.org/volian/ scar main
Processes:
CPU top: 5 of 210
1: cpu: 100% command: pcloud pid: 4177 mem: 203.5 MiB (1.2%)
2: cpu: 99.4% command: pcloud pid: 10617 mem: 185.1 MiB (1.1%)
3: cpu: 14.0% command: pcloud pid: 2758 mem: 325.6 MiB (2.0%)
4: cpu: 11.1% command: [kworker/u16:1-events_unbound] pid: 8510 mem: 0.00 MiB (0.0%)
5: cpu: 5.6% command: [kworker/u16:3-events_unbound] pid: 9658 mem: 0.00 MiB (0.0%)
Memory top: 5 of 210
1: mem: 325.6 MiB (2.0%) command: pcloud pid: 2758 cpu: 14.0%
2: mem: 203.5 MiB (1.2%) command: pcloud pid: 4177 cpu: 100%
3: mem: 185.1 MiB (1.1%) command: pcloud pid: 10617 cpu: 99.4%
4: mem: 96.2 MiB (0.6%) command: mariadbd pid: 2519 cpu: 0.0%
5: mem: 88.0 MiB (0.5%) command: pcloud pid: 2880 cpu: 0.0%
Info:
Processes: 210 Uptime: 3h 2m wakeups: 36 Init: SysVinit v: 2.96 runlevel: 5 default: 5
tool: service Compilers: gcc: 10.2.1 alt: 10 Client: IceWM v: 3.3.2 inxi: 3.3.25
Animal lover
Savior of abandoned electronics
Linux Enthusiast
Check out my Punk/Metal band Taco TuesdayMarch 30, 2023 at 9:44 am #103629In reply to: antiX-23-beta1-runit-full (64bit) for testing
MemberRobin
23 Beta boots fine out of the box on this old as the rocks 64bit single core device, 2 GB RAM, nouveau graphics driver. No issues, literally everything works without need of manually configuring. Even suspend and resume works without issues. Have booted immediately into modern 6.1 kernel, will recheck with legacy kernel and report only if issues show up.
System: Kernel: 6.1.18-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: lang=de_DE quiet splasht disable=lxF Desktop: IceWM v: 3.3.2 dm: slimski v: 1.5.0 Distro: antiX-23-beta1-runit_x64-full Grup Yorum 21 March 2023 base: Debian GNU/Linux bookworm/sid Machine: Type: Desktop Mobo: FOXCONN model: M61PMV v: FAB 1.1 serial: <superuser required> BIOS: Phoenix v: P07 date: 07/28/2009 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.8 GiB used: 328.2 MiB (17.8%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Info: model: AMD Sempron LE-1250 bits: 64 type: UP arch: K8 level: v1 built: 2005-08 process: AMD 65nm family: 0xF (15) model-id: 0x7F (127) stepping: 2 microcode: N/A Topology: cpus: 1x cores: 1 smt: <unsupported> cache: L1: 128 KiB desc: d-1x64 KiB; i-1x64 KiB L2: 512 KiB desc: 1x512 KiB Speed (MHz): 1000 min/max: 1000/2200 scaling: driver: powernow-k8 governor: schedutil core: 1: 1000 bogomips: 4420 Flags: 3dnow 3dnowext 3dnowprefetch apic clflush cmov cpuid cr8_legacy cx16 cx8 de extapic extd_apicid fpu fxsr fxsr_opt lahf_lm lm mca mce mmx mmxext msr mtrr nopl nx pae pat pge pni pse pse36 rdtscp rep_good sep sse sse2 syscall tsc vme vmmcall Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: NVIDIA C61 [GeForce 6150SE nForce 430] vendor: Foxconn driver: nouveau v: kernel non-free: series: 304.xx status: legacy (EOL) last: release: 304.137 kernel: 4.13 xorg: 1.19 arch: Curie process: 90-130nm built: 2003-13 ports: active: VGA-1 empty: none bus-ID: 00:0d.0 chip-ID: 10de:03d0 class-ID: 0300 Display: server: X.Org v: 1.21.1.7 driver: X: loaded: nouveau unloaded: fbdev,modesetting,vesa alternate: nv dri: nouveau gpu: nouveau display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1152x864 s-dpi: 96 s-size: 304x228mm (11.97x8.98") s-diag: 380mm (14.96") Monitor-1: VGA-1 model: Belinea/Maxdata 0x1b6c serial: <filter> built: 1998 res: 1152x864 hz: 75 dpi: 91 gamma: 1.83 chroma: red: x: 0.643 y: 0.329 green: x: 0.271 y: 0.604 blue: x: 0.141 y: 0.063 white: x: 0.278 y: 0.310 size: 320x240mm (12.6x9.45") diag: 400mm (15.7") ratio: 4:3 modes: 1280x1024, 1152x864, 1024x768, 800x600, 640x480, 640x400 API: OpenGL v: 2.1 Mesa 22.3.3 renderer: NV4C direct-render: Yes Audio: Device-1: NVIDIA MCP61 High Definition Audio vendor: Foxconn driver: snd_hda_intel v: kernel bus-ID: 00:05.0 chip-ID: 10de:03f0 class-ID: 0403 Sound API: ALSA v: k6.1.18-antix.1-amd64-smp running: yes Network: Device-1: NVIDIA MCP61 Ethernet vendor: Foxconn type: network bridge driver: forcedeth v: kernel port: ec00 bus-ID: 00:07.0 chip-ID: 10de:03ef class-ID: 0680 IF: eth0 state: down mac: <filter> WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 114.53 GiB used: 1.57 GiB (1.4%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SV6004H size: 55.94 GiB block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 0-11 scheme: GPT ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 8.01 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVD-RAM GSA-H55L rev: 1.03 dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 48 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) used: 1.55 GiB (2.7%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb uuid: 931ae8ee-8cd8-4f6a-83f0-9a076f281c10 ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 12.3 MiB (25.4%) fs: vfat dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 876C-FF7B Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 5.45 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda4 maj-min: 8:4 label: swap uuid: ffd30430-ec4d-472a-8d7d-a49e515dc5f2 Unmounted: ID-1: /dev/sda1 maj-min: 8:1 size: 500 MiB fs: ext4 label: boot uuid: 4e8cb7b3-d37f-4533-92c1-315d6a79cc3a ID-2: /dev/sda2 maj-min: 8:2 size: 20 GiB fs: ext4 label: root uuid: 5bc6e23a-7c3d-4830-983c-4fe01bac800d ID-3: /dev/sda3 maj-min: 8:3 size: 30 GiB fs: ext4 label: home uuid: f15441e2-5cbf-4b88-b63d-a91f232ebf7a USB: Hub-1: 1-0:1 info: Full speed or root hub ports: 10 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-1:2 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 serial: <filter> Hub-2: 2-0:1 info: Full speed or root hub ports: 10 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Sensors: System Temperatures: cpu: 4294939.3 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pm: dpkg pkgs: 1617 libs: 772 tools: apt,apt-get,synaptic Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb [signed-by=/etc/apt/keyrings/antix-archive-keyring.gpg] http: //repo.antixlinux.com/testing testing main nonfree nosystemd Active apt repos in: /etc/apt/sources.list.d/bookworm-backports.list 1: deb http: //deb.debian.org/debian bookworm-backports main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http: //ftp.de.debian.org/debian/ bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http: //ftp.de.debian.org/debian/ bookworm main contrib non-free non-free-firmware 2: deb http: //security.debian.org/ bookworm-security main contrib non-free non-free-firmware No active apt repos in: /etc/apt/sources.list.d/liquorix.list Processes: CPU top: 5 of 105 1: cpu: 32.0% command: yad pid: 5660 mem: 31.2 MiB (1.6%) 2: cpu: 4.1% command: gtkdialog pid: 5605 mem: 31.9 MiB (1.7%) 3: cpu: 2.7% command: xorg pid: 3821 mem: 80.1 MiB (4.3%) 4: cpu: 0.8% command: icewm pid: 3904 mem: 24.4 MiB (1.3%) 5: cpu: 0.4% command: zzzfm pid: 3949 mem: 40.3 MiB (2.1%) Memory top: 5 of 105 1: mem: 80.1 MiB (4.3%) command: xorg pid: 3821 cpu: 2.7% 2: mem: 40.3 MiB (2.1%) command: zzzfm pid: 3949 cpu: 0.4% 3: mem: 31.9 MiB (1.7%) command: gtkdialog pid: 5605 cpu: 4.1% 4: mem: 31.2 MiB (1.6%) command: yad pid: 5660 cpu: 32.0% 5: mem: 24.4 MiB (1.3%) command: icewm pid: 3904 cpu: 0.8% Info: Processes: 105 Uptime: 6m wakeups: 1 Init: runit v: N/A runlevel: 2 tool: service Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.25Windows is like a submarine. Open a window and serious problems will start.
March 29, 2023 at 6:28 pm #103576In reply to: Blueman cannot detect the headphone
Membersymbol
Yes, it contains that.
That’s strange, if you open the list in geany
sudo geany /etc/apt/sources.list.d/antix.listit should contain this
# Use with Debian Bullseye repositories. deb http://ftp.osuosl.org/pub/mxlinux/antix/bullseye/ bullseye main nosystemd nonfree #deb-src http://ftp.osuosl.org/pub/mxlinux/antix/bullseye/ bullseye main nosystemd nonfree- This reply was modified 1 month, 1 week ago by symbol. Reason: quote previous post
March 29, 2023 at 5:35 pm #103574Moderator
Brian Masinick
pinxi -zv8 System: Kernel: 6.2.8-x64v3-xanmod1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: BOOT_IMAGE=/boot/vmlinuz-6.2.8-x64v3-xanmod1 root=UUID=e1d85e10-a42a-4ed5-a98e-c860607e6910 ro quiet selinux=0 Desktop: IceWM v: 3.3.2 dm: slimski v: 1.5.0 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) volts: 12.9 min: 11.3 model: HP Primary type: Li-ion serial: <filter> status: not charging Memory: RAM: total: 7.09 GiB used: 1.19 GiB (16.8%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Info: model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x68 (104) stepping: 1 microcode: 0x8608103 Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache: L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 8 MiB desc: 2x4 MiB Speed (MHz): avg: 2220 high: 3892 min/max: 1400/4056 boost: enabled scaling: driver: acpi-cpufreq governor: performance cores: 1: 2100 2: 2100 3: 2100 4: 2100 5: 2100 6: 2100 7: 3892 8: 2100 9: 2100 10: 1757 11: 2100 12: 2100 bogomips: 50307 Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:164c class-ID: 0300 temp: 46.0 C Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo bus-ID: 2-3:3 chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Display: server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: eDP-1 mapped: eDP model: ChiMei InnoLux 0x1429 built: 2020 res: 1920x1080 hz: 60 dpi: 158 gamma: 1.2 chroma: red: x: 0.592 y: 0.349 green: x: 0.329 y: 0.557 blue: x: 0.153 y: 0.118 white: x: 0.314 y: 0.329 size: 309x173mm (12.17x6.81") diag: 354mm (13.9") ratio: 16:9 modes: 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768, 800x600, 640x480 EDID-Warnings: 1: parse_edid: unknown flag 2 API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.49.0 6.2.8-x64v3-xanmod1 LLVM 11.0.1) direct-render: Yes Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.1 chip-ID: 1002:1637 class-ID: 0403 Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480 Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403 API: ALSA v: k6.2.8-x64v3-xanmod1 status: kernel-api with: apulse type: pulse-emulator tools: alsamixer,amixer Server-1: PulseAudio v: 14.2 status: active tools: pacat,pactl,pavucontrol Network: Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 01:00.0 chip-ID: 10ec:a85a class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 2-4:4 chip-ID: 0bda:385a class-ID: e001 serial: <filter> Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2 sub-v: 7644 hci-v: 5.2 rev: d99a Info: acl-mtu: 1021:6 sco-mtu: 255:12 link-policy: rswitch hold sniff park link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 30.96 GiB (13.0%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Toshiba model: KBG40ZNV256G KIOXIA size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: HP00AE00 temp: 26.9 C scheme: GPT Message: No optical or floppy data found. Partition: ID-1: / raw-size: 48.83 GiB size: 47.76 GiB (97.81%) used: 30.91 GiB (64.7%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p3 maj-min: 259:3 label: rootantiX21 uuid: e1d85e10-a42a-4ed5-a98e-c860607e6910 ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%) used: 56.1 MiB (21.9%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: SYSTEM uuid: 669B-9111 Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p6 maj-min: 259:6 label: N/A uuid: d5ee9225-6bf8-4ea5-9299-547b7272c289 Unmounted: ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 1000 MiB fs: vfat label: N/A uuid: E253-D9ED ID-2: /dev/nvme0n1p4 maj-min: 259:4 size: 48.83 GiB fs: ext4 label: rootMX23 uuid: 5e2df1ad-78dd-4d06-964a-39c101e12fdd ID-3: /dev/nvme0n1p5 maj-min: 259:5 size: 48.83 GiB fs: ext4 label: rootantiX23 uuid: d4f28f3d-bba2-45a8-856f-984e1f9cbb30 ID-4: /dev/nvme0n1p7 maj-min: 259:7 size: 35.09 GiB fs: ext4 label: N/A uuid: ba9847e5-cd89-4ff7-aacb-eecf804ba657 ID-5: /dev/nvme0n1p8 maj-min: 259:8 size: 47.85 GiB fs: ext4 label: endeavouros uuid: 9d4b3198-1d58-45a1-bd31-991af24ff71f USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 2-2:2 info: KYE Systems (Mouse Systems) Trackbar Emotion type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: 0458:0007 class-ID: 0301 Device-2: 2-3:3 info: Chicony HP TrueVision HD Camera type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Device-3: 2-4:4 info: Realtek Bluetooth Radio type: Bluetooth driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s power: 500mA chip-ID: 0bda:385a class-ID: e001 serial: <filter> Hub-3: 3-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 50.2 C mobo: N/A gpu: amdgpu temp: 46.0 C Fan Speeds (RPM): fan-1: 0 fan-2: 0 Repos: Packages: pm: dpkg pkgs: 1836 libs: 834 tools: apt,apt-get,nala,synaptic Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye/ bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http://deb.debian.org/debian/ bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://atl.mirrors.clouvider.net/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://atl.mirrors.clouvider.net/debian/ bullseye main contrib non-free 2: deb http://security.debian.org/ bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main Active apt repos in: /etc/apt/sources.list.d/liquorix.list 1: deb https://liquorix.net/debian/ bullseye main 2: deb-src https://liquorix.net/debian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/opera-stable.list 1: deb https://deb.opera.com/opera-stable/ stable non-free No active apt repos in: /etc/apt/sources.list.d/various.list Active apt repos in: /etc/apt/sources.list.d/volian-archive-scar-unstable.list 1: deb [arch=amd64,arm64,armhf] http://deb.volian.org/volian/ scar main Active apt repos in: /etc/apt/sources.list.d/vscode.list 1: deb [arch=amd64,arm64,armhf] http://packages.microsoft.com/repos/code stable main Active apt repos in: /etc/apt/sources.list.d/xanmod-kernel.list 1: deb http://deb.xanmod.org/ releases main Active apt repos in: /etc/apt/sources.list.d/librewolf.sources 1: deb [arch=amd64] https://deb.librewolf.net bullseye main Processes: CPU top: 5 of 267 1: cpu: 9.1% command: firefox pid: 3074 mem: 428.2 MiB (5.8%) 2: cpu: 2.6% command: firefox-bin pid: 3607 mem: 165.7 MiB (2.2%) 3: cpu: 2.3% command: xorg pid: 1917 mem: 87.2 MiB (1.2%) 4: cpu: 2.1% command: firefox-bin pid: 3414 mem: 205.7 MiB (2.8%) 5: cpu: 0.7% command: [irq/77-rtw89_pci] pid: 601 mem: 0.00 MiB (0.0%) Memory top: 5 of 267 1: mem: 428.2 MiB (5.8%) command: firefox pid: 3074 cpu: 9.1% 2: mem: 205.7 MiB (2.8%) command: firefox-bin pid: 3414 cpu: 2.1% 3: mem: 165.7 MiB (2.2%) command: firefox-bin pid: 3607 cpu: 2.6% 4: mem: 105.4 MiB (1.4%) command: firefox-bin pid: 3465 cpu: 0.1% 5: mem: 97.5 MiB (1.3%) command: firefox-bin pid: 3235 cpu: 0.1% Info: Processes: 267 Uptime: 6m wakeups: 656 Init: runit v: N/A runlevel: 2 tool: service Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4 running-in: roxterm pinxi: 3.3.26-1--
Brian MasinickMarch 28, 2023 at 6:58 pm #103478Moderator
Brian Masinick
I’m here with our test system now; I will run the simple test
pinxi -Aax Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.1 chip-ID: 1002:1637 class-ID: 0403 Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Hewlett-Packard Raven/Raven2/FireFlight/Renoir Processor driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480 Device-3: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403 API: ALSA v: k6.1.18-antix.1-amd64-smp status: kernel-api with: apulse type: pulse-emulator tools: alsamixer,amixer…and the longer test…
sudo ./pinxi -zv8 System: Kernel: 6.1.18-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.18-antix.1-amd64-smp root=UUID=d4f28f3d-bba2-45a8-856f-984e1f9cbb30 ro quiet selinux=0 Desktop: IceWM v: 3.3.2 dm: slimski v: 1.5.0 Distro: antiX-23-beta1-runit_x64-full Grup Yorum 21 March 2023 base: Debian GNU/Linux 12 (bookworm) Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <filter> Chassis: type: 10 serial: <filter> Mobo: HP model: 887C v: 59.11 serial: <filter> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) volts: 12.9 min: 11.3 model: HP Primary type: Li-ion serial: <filter> status: not charging Memory: RAM: total: 7.1 GiB used: 1.33 GiB (18.8%) Array-1: capacity: 32 GiB slots: 2 EC: None max-module-size: 16 GiB note: est. Device-1: Bottom - Slot 1 (left) type: DDR4 detail: synchronous unbuffered (unregistered) size: 8 GiB speed: 3200 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits): data: 64 total: 64 manufacturer: Samsung part-no: M471A1K43EB1-CWE serial: <filter> Device-2: Bottom - Slot 2 (right) type: no module installed PCI Slots: Slot: 0 type: PCIe lanes: 16 status: in use info: J6B2 length: long volts: 3.3 bus-ID: 00:01.0 CPU: Info: model: AMD Ryzen 5 5500U with Radeon Graphics socket: FP6 bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x68 (104) stepping: 1 microcode: 0x8608103 Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache: L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 8 MiB desc: 2x4 MiB Speed (MHz): avg: 1458 high: 2100 min/max: 1400/4056 boost: enabled base/boost: 2100/4050 scaling: driver: acpi-cpufreq governor: schedutil volts: 1.2 V ext-clock: 100 MHz cores: 1: 1400 2: 1400 3: 1400 4: 1400 5: 1400 6: 1400 7: 1400 8: 1400 9: 2100 10: 1400 11: 1400 12: 1400 bogomips: 50307 Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:164c class-ID: 0300 temp: 45.0 C Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo bus-ID: 1-3:3 chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Display: server: X.Org v: 1.21.1.7 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: eDP-1 mapped: eDP model: ChiMei InnoLux 0x1429 built: 2020 res: 1920x1080 hz: 60 dpi: 158 gamma: 1.2 chroma: red: x: 0.592 y: 0.349 green: x: 0.329 y: 0.557 blue: x: 0.153 y: 0.118 white: x: 0.314 y: 0.329 size: 309x173mm (12.17x6.81") diag: 354mm (13.9") ratio: 16:9 modes: 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768, 800x600, 640x480 EDID-Warnings: 1: parse_edid: unknown flag 2 API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon Graphics (renoir LLVM 15.0.6 DRM 3.49 6.1.18-antix.1-amd64-smp) direct-render: Yes Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.1 chip-ID: 1002:1637 class-ID: 0403 Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Hewlett-Packard Raven/Raven2/FireFlight/Renoir Processor driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480 Device-3: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403 API: ALSA v: k6.1.18-antix.1-amd64-smp status: kernel-api with: apulse type: pulse-emulator tools: alsamixer,amixer Network: Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 01:00.0 chip-ID: 10ec:a85a class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-4:4 chip-ID: 0bda:385a class-ID: e001 serial: <filter> Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: disabled rfk-block: hardware: no software: yes address: <filter> Info: acl-mtu: 1021:6 sco-mtu: 255:12 link-policy: rswitch hold sniff park link-mode: peripheral accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 20.14 GiB (8.4%) ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Toshiba model: KBG40ZNV256G KIOXIA size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: HP00AE00 temp: 26.9 C scheme: GPT SMART: yes health: PASSED on: 12d 4h cycles: 602 read-units: 4,753,538 [2.43 TB] written-units: 4,750,872 [2.43 TB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 48.83 GiB size: 47.76 GiB (97.81%) used: 20.09 GiB (42.1%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p5 maj-min: 259:5 label: rootantiX23 uuid: d4f28f3d-bba2-45a8-856f-984e1f9cbb30 ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%) used: 56.1 MiB (21.9%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: SYSTEM uuid: 669B-9111 Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p6 maj-min: 259:6 label: N/A uuid: d5ee9225-6bf8-4ea5-9299-547b7272c289 Unmounted: ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 1000 MiB fs: vfat label: N/A uuid: E253-D9ED ID-2: /dev/nvme0n1p3 maj-min: 259:3 size: 48.83 GiB fs: ext4 label: rootantiX21 uuid: e1d85e10-a42a-4ed5-a98e-c860607e6910 ID-3: /dev/nvme0n1p4 maj-min: 259:4 size: 48.83 GiB fs: ext4 label: rootMX23 uuid: 5e2df1ad-78dd-4d06-964a-39c101e12fdd ID-4: /dev/nvme0n1p7 maj-min: 259:7 size: 35.09 GiB fs: ext4 label: N/A uuid: ba9847e5-cd89-4ff7-aacb-eecf804ba657 ID-5: /dev/nvme0n1p8 maj-min: 259:8 size: 47.85 GiB fs: ext4 label: endeavouros uuid: 9d4b3198-1d58-45a1-bd31-991af24ff71f USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-2:2 info: KYE Systems (Mouse Systems) Trackbar Emotion type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: 0458:0007 class-ID: 0301 Device-2: 1-3:3 info: Chicony HP TrueVision HD Camera type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Device-3: 1-4:4 info: Realtek Bluetooth Radio type: Bluetooth driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s power: 500mA chip-ID: 0bda:385a class-ID: e001 serial: <filter> Hub-2: 2-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 50.5 C mobo: N/A gpu: amdgpu temp: 45.0 C Fan Speeds (RPM): fan-1: 0 fan-2: 0 Repos: Packages: pm: dpkg pkgs: 1667 libs: 780 tools: apt,apt-get,synaptic Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb [signed-by=/etc/apt/keyrings/antix-archive-keyring.gpg] http://repo.antixlinux.com/testing testing main nonfree nosystemd Active apt repos in: /etc/apt/sources.list.d/bookworm-backports.list 1: deb http://deb.debian.org/debian bookworm-backports main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://atl.mirrors.clouvider.net/debian/ bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://atl.mirrors.clouvider.net/debian/ bookworm main contrib non-free non-free-firmware 2: deb http://security.debian.org/ bookworm-security main contrib non-free non-free-firmware No active apt repos in: /etc/apt/sources.list.d/liquorix.list Processes: CPU top: 5 of 244 1: cpu: 91.6% command: perl pid: 13371 mem: 33.3 MiB (0.4%) 2: cpu: 10.7% command: firefox pid: 11716 mem: 474.6 MiB (6.5%) 3: cpu: 3.4% command: firefox-bin pid: 12042 mem: 206.3 MiB (2.8%) 4: cpu: 3.0% command: firefox-bin pid: 12211 mem: 157.4 MiB (2.1%) 5: cpu: 1.6% command: xorg pid: 2026 mem: 115.5 MiB (1.5%) Memory top: 5 of 244 1: mem: 474.6 MiB (6.5%) command: firefox pid: 11716 cpu: 10.7% 2: mem: 206.3 MiB (2.8%) command: firefox-bin pid: 12042 cpu: 3.4% 3: mem: 157.4 MiB (2.1%) command: firefox-bin pid: 12211 cpu: 3.0% 4: mem: 117.6 MiB (1.6%) command: firefox-bin pid: 12107 cpu: 0.4% 5: mem: 115.5 MiB (1.5%) command: xorg pid: 2026 cpu: 1.6% Info: Processes: 244 Uptime: 10m wakeups: 1800 Init: runit v: N/A runlevel: 2 tool: service Compilers: gcc: 12.2.0 alt: 12 Shell: Sudo (sudo) v: 1.9.13p3 default: Bash v: 5.2.15 running-in: roxterm pinxi: 3.3.25-21--
Brian MasinickMarch 28, 2023 at 6:23 pm #103473Moderator
Brian Masinick
pinxi -zv8 System: Kernel: 6.2.8-x64v3-xanmod1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: BOOT_IMAGE=/boot/vmlinuz-6.2.8-x64v3-xanmod1 root=UUID=e1d85e10-a42a-4ed5-a98e-c860607e6910 ro quiet selinux=0 Desktop: IceWM v: 3.3.2 dm: slimski v: 1.5.0 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) volts: 12.9 min: 11.3 model: HP Primary type: Li-ion serial: <filter> status: not charging Memory: RAM: total: 7.09 GiB used: 1.58 GiB (22.2%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Info: model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x68 (104) stepping: 1 microcode: 0x8608103 Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache: L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 8 MiB desc: 2x4 MiB Speed (MHz): avg: 2100 min/max: 1400/4056 boost: enabled scaling: driver: acpi-cpufreq governor: performance cores: 1: 2100 2: 2100 3: 2100 4: 2100 5: 2100 6: 2100 7: 2100 8: 2100 9: 2100 10: 2100 11: 2100 12: 2100 bogomips: 50303 Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:164c class-ID: 0300 temp: 50.0 C Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo bus-ID: 1-3:2 chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Display: server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: eDP-1 mapped: eDP model: ChiMei InnoLux 0x1429 built: 2020 res: 1920x1080 hz: 60 dpi: 158 gamma: 1.2 chroma: red: x: 0.592 y: 0.349 green: x: 0.329 y: 0.557 blue: x: 0.153 y: 0.118 white: x: 0.314 y: 0.329 size: 309x173mm (12.17x6.81") diag: 354mm (13.9") ratio: 16:9 modes: 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768, 800x600, 640x480 EDID-Warnings: 1: parse_edid: unknown flag 2 API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.49.0 6.2.8-x64v3-xanmod1 LLVM 11.0.1) direct-render: Yes Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.1 chip-ID: 1002:1637 class-ID: 0403 Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480 Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403 API: ALSA v: k6.2.8-x64v3-xanmod1 status: kernel-api with: apulse type: pulse-emulator tools: alsamixer,amixer Server-1: PulseAudio v: 14.2 status: active tools: pacat,pactl,pavucontrol Network: Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 01:00.0 chip-ID: 10ec:a85a class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-4:3 chip-ID: 0bda:385a class-ID: e001 serial: <filter> Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2 sub-v: 7644 hci-v: 5.2 rev: d99a Info: acl-mtu: 1021:6 sco-mtu: 255:12 link-policy: rswitch hold sniff park link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 31.21 GiB (13.1%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Toshiba model: KBG40ZNV256G KIOXIA size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: HP00AE00 temp: 29.9 C scheme: GPT Message: No optical or floppy data found. Partition: ID-1: / raw-size: 48.83 GiB size: 47.76 GiB (97.81%) used: 31.15 GiB (65.2%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p3 maj-min: 259:3 label: rootantiX21 uuid: e1d85e10-a42a-4ed5-a98e-c860607e6910 ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%) used: 56.1 MiB (21.9%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: SYSTEM uuid: 669B-9111 Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p6 maj-min: 259:6 label: N/A uuid: d5ee9225-6bf8-4ea5-9299-547b7272c289 Unmounted: ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 1000 MiB fs: vfat label: N/A uuid: E253-D9ED ID-2: /dev/nvme0n1p4 maj-min: 259:4 size: 48.83 GiB fs: ext4 label: rootMX23 uuid: 5e2df1ad-78dd-4d06-964a-39c101e12fdd ID-3: /dev/nvme0n1p5 maj-min: 259:5 size: 48.83 GiB fs: ext4 label: rootantiX23 uuid: d4f28f3d-bba2-45a8-856f-984e1f9cbb30 ID-4: /dev/nvme0n1p7 maj-min: 259:7 size: 35.09 GiB fs: ext4 label: N/A uuid: ba9847e5-cd89-4ff7-aacb-eecf804ba657 ID-5: /dev/nvme0n1p8 maj-min: 259:8 size: 47.85 GiB fs: ext4 label: endeavouros uuid: 9d4b3198-1d58-45a1-bd31-991af24ff71f USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-2:4 info: KYE Systems (Mouse Systems) Trackbar Emotion type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: 0458:0007 class-ID: 0301 Device-2: 1-3:2 info: Chicony HP TrueVision HD Camera type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Device-3: 1-4:3 info: Realtek Bluetooth Radio type: Bluetooth driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s power: 500mA chip-ID: 0bda:385a class-ID: e001 serial: <filter> Hub-2: 2-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-3: 3-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 54.9 C mobo: N/A gpu: amdgpu temp: 50.0 C Fan Speeds (RPM): fan-1: 0 fan-2: 0 Repos: Packages: pm: dpkg pkgs: 1836 libs: 834 tools: apt,apt-get,nala,synaptic Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye/ bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http://deb.debian.org/debian/ bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://atl.mirrors.clouvider.net/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://atl.mirrors.clouvider.net/debian/ bullseye main contrib non-free 2: deb http://security.debian.org/ bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main Active apt repos in: /etc/apt/sources.list.d/liquorix.list 1: deb https://liquorix.net/debian/ bullseye main 2: deb-src https://liquorix.net/debian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/opera-stable.list 1: deb https://deb.opera.com/opera-stable/ stable non-free No active apt repos in: /etc/apt/sources.list.d/various.list Active apt repos in: /etc/apt/sources.list.d/volian-archive-scar-unstable.list 1: deb [arch=amd64,arm64,armhf] http://deb.volian.org/volian/ scar main Active apt repos in: /etc/apt/sources.list.d/vscode.list 1: deb [arch=amd64,arm64,armhf] http://packages.microsoft.com/repos/code stable main Active apt repos in: /etc/apt/sources.list.d/xanmod-kernel.list 1: deb http://deb.xanmod.org/ releases main Active apt repos in: /etc/apt/sources.list.d/librewolf.sources 1: deb [arch=amd64] https://deb.librewolf.net bullseye main Processes: CPU top: 5 of 284 1: cpu: 11.0% command: pinxi started-by: perl pid: 20973 mem: 33.9 MiB (0.4%) 2: cpu: 4.6% command: firefox pid: 20993 mem: 569.4 MiB (7.8%) 3: cpu: 1.5% command: firefox-bin pid: 21412 mem: 298.2 MiB (4.1%) 4: cpu: 1.4% command: xorg pid: 1923 mem: 89.8 MiB (1.2%) 5: cpu: 1.1% command: firefox-bin pid: 21316 mem: 196.6 MiB (2.7%) Memory top: 5 of 284 1: mem: 569.4 MiB (7.8%) command: firefox pid: 20993 cpu: 4.6% 2: mem: 298.2 MiB (4.1%) command: firefox-bin pid: 21412 cpu: 1.5% 3: mem: 202.7 MiB (2.7%) command: firefox-bin pid: 21282 cpu: 0.3% 4: mem: 196.6 MiB (2.7%) command: firefox-bin pid: 21316 cpu: 1.1% 5: mem: 120.2 MiB (1.6%) command: firefox-bin pid: 3903 cpu: 0.1% Info: Processes: 284 Uptime: 4h 25m wakeups: 19965 Init: runit v: N/A runlevel: 2 tool: service Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4 running-in: roxterm pinxi: 3.3.25-20--
Brian MasinickMarch 28, 2023 at 6:22 pm #103472Moderator
Brian Masinick
pinxi -zv8 System: Kernel: 6.2.8-x64v3-xanmod1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: BOOT_IMAGE=/boot/vmlinuz-6.2.8-x64v3-xanmod1 root=UUID=e1d85e10-a42a-4ed5-a98e-c860607e6910 ro quiet selinux=0 Desktop: IceWM v: 3.3.2 dm: slimski v: 1.5.0 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) volts: 12.9 min: 11.3 model: HP Primary type: Li-ion serial: <filter> status: not charging Memory: RAM: total: 7.09 GiB used: 1.58 GiB (22.2%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Info: model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x68 (104) stepping: 1 microcode: 0x8608103 Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache: L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 8 MiB desc: 2x4 MiB Speed (MHz): avg: 2100 min/max: 1400/4056 boost: enabled scaling: driver: acpi-cpufreq governor: performance cores: 1: 2100 2: 2100 3: 2100 4: 2100 5: 2100 6: 2100 7: 2100 8: 2100 9: 2100 10: 2100 11: 2100 12: 2100 bogomips: 50303 Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:164c class-ID: 0300 temp: 50.0 C Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo bus-ID: 1-3:2 chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Display: server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: eDP-1 mapped: eDP model: ChiMei InnoLux 0x1429 built: 2020 res: 1920x1080 hz: 60 dpi: 158 gamma: 1.2 chroma: red: x: 0.592 y: 0.349 green: x: 0.329 y: 0.557 blue: x: 0.153 y: 0.118 white: x: 0.314 y: 0.329 size: 309x173mm (12.17x6.81") diag: 354mm (13.9") ratio: 16:9 modes: 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768, 800x600, 640x480 EDID-Warnings: 1: parse_edid: unknown flag 2 API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.49.0 6.2.8-x64v3-xanmod1 LLVM 11.0.1) direct-render: Yes Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.1 chip-ID: 1002:1637 class-ID: 0403 Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480 Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403 API: ALSA v: k6.2.8-x64v3-xanmod1 status: kernel-api with: apulse type: pulse-emulator tools: alsamixer,amixer Server-1: PulseAudio v: 14.2 status: active tools: pacat,pactl,pavucontrol Network: Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 01:00.0 chip-ID: 10ec:a85a class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-4:3 chip-ID: 0bda:385a class-ID: e001 serial: <filter> Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2 sub-v: 7644 hci-v: 5.2 rev: d99a Info: acl-mtu: 1021:6 sco-mtu: 255:12 link-policy: rswitch hold sniff park link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 31.21 GiB (13.1%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Toshiba model: KBG40ZNV256G KIOXIA size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: HP00AE00 temp: 29.9 C scheme: GPT Message: No optical or floppy data found. Partition: ID-1: / raw-size: 48.83 GiB size: 47.76 GiB (97.81%) used: 31.15 GiB (65.2%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p3 maj-min: 259:3 label: rootantiX21 uuid: e1d85e10-a42a-4ed5-a98e-c860607e6910 ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%) used: 56.1 MiB (21.9%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: SYSTEM uuid: 669B-9111 Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p6 maj-min: 259:6 label: N/A uuid: d5ee9225-6bf8-4ea5-9299-547b7272c289 Unmounted: ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 1000 MiB fs: vfat label: N/A uuid: E253-D9ED ID-2: /dev/nvme0n1p4 maj-min: 259:4 size: 48.83 GiB fs: ext4 label: rootMX23 uuid: 5e2df1ad-78dd-4d06-964a-39c101e12fdd ID-3: /dev/nvme0n1p5 maj-min: 259:5 size: 48.83 GiB fs: ext4 label: rootantiX23 uuid: d4f28f3d-bba2-45a8-856f-984e1f9cbb30 ID-4: /dev/nvme0n1p7 maj-min: 259:7 size: 35.09 GiB fs: ext4 label: N/A uuid: ba9847e5-cd89-4ff7-aacb-eecf804ba657 ID-5: /dev/nvme0n1p8 maj-min: 259:8 size: 47.85 GiB fs: ext4 label: endeavouros uuid: 9d4b3198-1d58-45a1-bd31-991af24ff71f USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-2:4 info: KYE Systems (Mouse Systems) Trackbar Emotion type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: 0458:0007 class-ID: 0301 Device-2: 1-3:2 info: Chicony HP TrueVision HD Camera type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Device-3: 1-4:3 info: Realtek Bluetooth Radio type: Bluetooth driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s power: 500mA chip-ID: 0bda:385a class-ID: e001 serial: <filter> Hub-2: 2-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-3: 3-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 54.9 C mobo: N/A gpu: amdgpu temp: 50.0 C Fan Speeds (RPM): fan-1: 0 fan-2: 0 Repos: Packages: pm: dpkg pkgs: 1836 libs: 834 tools: apt,apt-get,nala,synaptic Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye/ bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http://deb.debian.org/debian/ bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://atl.mirrors.clouvider.net/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://atl.mirrors.clouvider.net/debian/ bullseye main contrib non-free 2: deb http://security.debian.org/ bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main Active apt repos in: /etc/apt/sources.list.d/liquorix.list 1: deb https://liquorix.net/debian/ bullseye main 2: deb-src https://liquorix.net/debian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/opera-stable.list 1: deb https://deb.opera.com/opera-stable/ stable non-free No active apt repos in: /etc/apt/sources.list.d/various.list Active apt repos in: /etc/apt/sources.list.d/volian-archive-scar-unstable.list 1: deb [arch=amd64,arm64,armhf] http://deb.volian.org/volian/ scar main Active apt repos in: /etc/apt/sources.list.d/vscode.list 1: deb [arch=amd64,arm64,armhf] http://packages.microsoft.com/repos/code stable main Active apt repos in: /etc/apt/sources.list.d/xanmod-kernel.list 1: deb http://deb.xanmod.org/ releases main Active apt repos in: /etc/apt/sources.list.d/librewolf.sources 1: deb [arch=amd64] https://deb.librewolf.net bullseye main Processes: CPU top: 5 of 284 1: cpu: 11.0% command: pinxi started-by: perl pid: 20973 mem: 33.9 MiB (0.4%) 2: cpu: 4.6% command: firefox pid: 20993 mem: 569.4 MiB (7.8%) 3: cpu: 1.5% command: firefox-bin pid: 21412 mem: 298.2 MiB (4.1%) 4: cpu: 1.4% command: xorg pid: 1923 mem: 89.8 MiB (1.2%) 5: cpu: 1.1% command: firefox-bin pid: 21316 mem: 196.6 MiB (2.7%) Memory top: 5 of 284 1: mem: 569.4 MiB (7.8%) command: firefox pid: 20993 cpu: 4.6% 2: mem: 298.2 MiB (4.1%) command: firefox-bin pid: 21412 cpu: 1.5% 3: mem: 202.7 MiB (2.7%) command: firefox-bin pid: 21282 cpu: 0.3% 4: mem: 196.6 MiB (2.7%) command: firefox-bin pid: 21316 cpu: 1.1% 5: mem: 120.2 MiB (1.6%) command: firefox-bin pid: 3903 cpu: 0.1% Info: Processes: 284 Uptime: 4h 25m wakeups: 19965 Init: runit v: N/A runlevel: 2 tool: service Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4 running-in: roxterm pinxi: 3.3.25-20--
Brian MasinickMarch 27, 2023 at 11:03 pm #103391In reply to: Blueman cannot detect the headphone
Moderator
caprea
That’s strange, if you open the list in geany
sudo geany /etc/apt/sources.list.d/antix.listit should contain this
# Use with Debian Bullseye repositories. deb http://ftp.osuosl.org/pub/mxlinux/antix/bullseye/ bullseye main nosystemd nonfree #deb-src http://ftp.osuosl.org/pub/mxlinux/antix/bullseye/ bullseye main nosystemd nonfreeMarch 27, 2023 at 10:46 pm #103389In reply to: Blueman cannot detect the headphone
Membersymbol
I don’t think I disable the antix repo. The updated output.txt still shows
No active apt repos in: /etc/apt/sources.list.d/antix.listYou somehow disabled the antiX sources
Attachments:
March 27, 2023 at 10:39 pm #103388In reply to: Blueman cannot detect the headphone
Moderator
caprea
From the output.txt
Repos: Packages: 1919 No active apt repos in: /etc/apt/sources.list.d/antix.listYou somehow disabled the antiX sources. Please use repo-manager, control-centre > Software > Repo Manager
On the antiX Repos tab click on the button for “Automatic selection of the fastest currently available antiX repo server”Afterwards sudo apt update from terminal and then try again to install
pulseaudio
gstreamer1.0-pulseaudio
pulseaudio-module-bluetooth
pavucontrolTo make pulseaudio autostart at boot you have to go to
control-centre > session > User-desktop-session
On the startup tab search for pulseaudio and make it look like that## Uncomment if using pulseaudio (you need to install it). Make sure it starts before volumeicon. pulseaudio -D &Reboot
Now you can try again blueman -
AuthorSearch Results
