Page 18 – antiX-forum

Viewing 15 results - 256 through 270 (of 567 total)

← 1 … 17 18 19 … 38 →

Author

Search Results
February 8, 2021 at 5:01 am #54135

In reply to: Does antiX run on newer AMD type computers.
Member
ex_Koo
Will so far after installing the Asus modules https://github.com/electrified/asus-wmi-sensors this system is fully operational.
Linux antix21a 5.8.16-antix.1-amd64-smp #1 SMP PREEMPT Tue Oct 20 01:48:36 EEST 2020 x86_64 GNU/Linux
```
$ lspci -nnk | grep -i -EA3 "3d|display|vga"
01:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset USB 3.1 XHCI Controller [1022:43d5] (rev 01)
	Subsystem: ASMedia Technology Inc. 400 Series Chipset USB 3.1 XHCI Controller [1b21:1142]
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
--
08:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1002:731f] (rev ca)
	Subsystem: Sapphire Technology Limited Radeon RX 5600 XT [1da2:e411]
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu
```
```
koo@antix21a:~
$ ls /sys/class/hwmon/; cat /sys/class/hwmon/*/name
hwmon0  hwmon1  hwmon2  hwmon3
k10temp
asus
amdgpu
asuswmisensors

----------------------------------------
koo@antix21a:~
$ for m in /sys/class/hwmon/* ; do echo -n "$m = " ; cat $m/name ; done
/sys/class/hwmon/hwmon0 = k10temp
/sys/class/hwmon/hwmon1 = asus
/sys/class/hwmon/hwmon2 = amdgpu
/sys/class/hwmon/hwmon3 = asuswmisensors
```
```
$ sensors
amdgpu-pci-0800
Adapter: PCI adapter
vddgfx:      775.00 mV 
fan1:           0 RPM  (min =    0 RPM, max = 3200 RPM)
edge:         +44.0°C  (crit = +118.0°C, hyst = -273.1°C)
                       (emerg = +99.0°C)
junction:     +44.0°C  (crit = +99.0°C, hyst = -273.1°C)
                       (emerg = +99.0°C)
mem:          +44.0°C  (crit = +99.0°C, hyst = -273.1°C)
                       (emerg = +99.0°C)
power1:        8.00 W  (cap = 135.00 W)

k10temp-pci-00c3
Adapter: PCI adapter
Vcore:         1.43 V  
Vsoc:          1.05 V  
Tctl:         +41.6°C  
Tdie:         +41.6°C  
Tccd1:        +41.5°C  
Icore:        13.00 A  
Isoc:          3.50 A  

asuswmisensors-isa-0000
Adapter: ISA adapter
CPU Core Voltage:        174.00 mV 
VPP MEM Voltage:           2.50 V  
+12V Voltage:             10.19 V  
+5V Voltage:               5.01 V  
3VSB Voltage:              3.33 V  
VBAT Voltage:              3.23 V  
AVCC3 Voltage:             3.33 V  
SB 1.05V Voltage:          1.07 V  
CPU Core Voltage:        199.00 mV 
CPU SOC Voltage:           1.05 V  
CPU Fan:                  753 RPM
Chassis Fan 1:            967 RPM
AIO Pump:                2051 RPM
CPU OPT:                    0 RPM
CPU Temperature:          +41.0°C  
CPU Socket Temperature:   +37.0°C  
Motherboard Temperature:  +39.0°C  
Chipset Temperature:      +53.0°C  
Tsensor 1 Temperature:   +216.0°C  
CPU VRM Temperature:      +39.0°C  
CPU VRM Output Current:    0.00 A 
```
```
System:    Host: antix21a Kernel: 5.8.16-antix.1-amd64-smp x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.8.16-antix.1-amd64-smp 
           root=UUID=82593f8f-dfc1-43bd-8402-ff0a99626493 ro quiet 
           Desktop: i3 4.19 info: i3bar dm: SLiM 1.3.6 
           Distro: antiX-bullseye-a1_x64-full Grup Yorum 3 January 2021 
           base: Debian GNU/Linux bullseye/sid 
Machine:   Type: Desktop Mobo: ASUSTeK model: ROG STRIX B450-I GAMING v: Rev 1.xx serial: <filter> 
           UEFI: American Megatrends v: 4204 date: 01/28/2021 
Memory:    RAM: total: 15.62 GiB used: 809.8 MiB (5.1%) 
           RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. 
CPU:       Topology: 6-Core model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 
           family: 17 (23) model-id: 71 (113) stepping: N/A microcode: 8701021 L2 cache: 3072 KiB 
           bogomips: 86398 
           Speed: 2200 MHz min/max: 2200/3600 MHz boost: enabled Core speeds (MHz): 1: 2200 
           2: 2199 3: 2205 4: 2193 5: 2199 6: 2198 7: 2199 8: 2200 9: 2199 10: 2200 11: 2199 
           12: 2200 
           Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext 
           cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cpuid cqm 
           cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists 
           extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb 
           ibs irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr 
           mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter 
           pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse 
           pse36 rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sev sha_ni skinit smap smca 
           sme smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce 
           topoext tsc tsc_scale umip v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt 
           xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 
           mitigation: Full AMD retpoline, IBPB: conditional, STIBP: conditional, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: AMD Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] 
           vendor: Sapphire Limited driver: amdgpu v: kernel bus ID: 08:00.0 chip ID: 1002:731f 
           Display: x11 server: X.Org 1.20.10 driver: amdgpu unloaded: fbdev compositor: compton 
           v: 1 resolution: 2560x1440~60Hz 
           OpenGL: 
           renderer: AMD Radeon RX 5600 XT (NAVI10 DRM 3.38.0 5.8.16-antix.1-amd64-smp LLVM 11.0.1) 
           v: 4.6 Mesa 20.3.4 direct render: Yes 
Audio:     Device-1: AMD Navi 10 HDMI Audio driver: snd_hda_intel v: kernel bus ID: 08:00.1 
           chip ID: 1002:ab38 
           Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel 
           bus ID: 0a:00.4 chip ID: 1022:1487 
           Device-3: TEAC US-2x2 type: USB driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-1:2 
           chip ID: 0644:8045 
           Sound Server: ALSA v: k5.8.16-antix.1-amd64-smp 
Network:   Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: 5.6.0-k port: d000 
           bus ID: 03:00.0 chip ID: 8086:1539 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           IP v4: <filter> scope: global broadcast: <filter> 
           IP v6: <filter> scope: link 
           Device-2: Realtek RTL8822BE 802.11a/b/g/n/ac WiFi adapter vendor: ASUSTeK 
           driver: rtw_8822be v: N/A port: c000 bus ID: 04:00.0 chip ID: 10ec:b822 
           IF: wlan0 state: down mac: <filter> 
           WAN IP: <filter> 
Drives:    Local Storage: total: 465.76 GiB used: 8.67 GiB (1.9%) 
           ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 1B6Q scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 24.61 GiB size: 24.09 GiB (97.92%) used: 5.88 GiB (24.4%) fs: ext4 
           dev: /dev/sda6 label: rootantiX19 uuid: 82593f8f-dfc1-43bd-8402-ff0a99626493 
           ID-2: /boot/efi raw size: 100.0 MiB size: 96.0 MiB (96.00%) used: 31.0 MiB (32.3%) 
           fs: vfat dev: /dev/sda2 label: N/A uuid: E463-F5AD 
           ID-3: /home raw size: 96.01 GiB size: 94.00 GiB (97.91%) used: 2.76 GiB (2.9%) fs: ext4 
           dev: /dev/sda7 label: homeantiX uuid: 131a68bf-e32b-4404-8bf6-2bdaae384678 
           ID-4: swap-1 size: 16.17 GiB used: 0 KiB (0.0%) fs: swap swappiness: 10 (default 60) 
           cache pressure: 50 (default 100) dev: /dev/sda10 label: N/A 
           uuid: da707172-2f9e-4092-8c00-ae2100abc6d8 
Unmounted: ID-1: /dev/sda1 size: 300.0 MiB fs: ntfs label: Recovery uuid: EA26632C2662F949 
           ID-2: /dev/sda3 size: 128.0 MiB fs: <root required> label: N/A uuid: N/A 
           ID-3: /dev/sda4 size: 132.27 GiB fs: ntfs label: N/A uuid: 306C18586C181AE4 
           ID-4: /dev/sda5 size: 517.0 MiB fs: ntfs label: N/A uuid: 84664A41664A3468 
           ID-5: /dev/sda8 size: 59.32 GiB fs: ext4 label: rootMX19 
           uuid: daa56471-769f-464c-9397-f3e47110ad52 
           ID-6: /dev/sda9 size: 136.37 GiB fs: ext4 label: homeMX 
           uuid: bf25c21e-978e-483a-8fff-098d7f2d8234 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Device-1: 1-1:2 info: TEAC US-2x2 type: Audio,HID 
           driver: hid-generic,snd-usb-audio,usbhid interfaces: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0644:8045 
           Device-2: 1-6:3 info: ASUSTek AURA LED Controller type: HID driver: hid-generic,usbhid 
           interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0b05:1872 serial: <filter> 
           Device-3: 1-8:4 info: ASUSTek Bluetooth Radio type: Bluetooth driver: btusb 
           interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 0b05:185c serial: <filter> 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Device-4: 3-1:2 info: Razer USA DeathAdder Chroma type: Mouse,HID,Keyboard 
           driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 1532:0043 
           Device-5: 3-2:3 info: Logitech Pro Gaming Keyboard type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c339 
           serial: <filter> 
           Device-6: 3-3:4 info: Brother Industries HL-L2350DW series type: Printer driver: usblp 
           interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 04f9:009e serial: <filter> 
           Hub: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   System Temperatures: cpu: 46.1 C mobo: 40.0 C gpu: amdgpu temp: 44 C 
           Fan Speeds (RPM): cpu: 707 case-1: 1016 gpu: amdgpu fan: 0 
           Voltages: 12v: 10.14 5v: N/A 3.3v: N/A vbat: 3.25 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb https: //mirrors.evowise.com/mxlinux-packages/antix// testing main nosystemd nonfree
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http: //deb.debian.org/debian/ bullseye main contrib non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 
           1: cpu: 7.3% command: firefox-esr pid: 4483 mem: 358.9 MiB (2.2%) 
           2: cpu: 2.7% command: xorg pid: 2099 mem: 121.6 MiB (0.7%) 
           3: cpu: 0.7% command: firefox-esr pid: 4623 mem: 204.2 MiB (1.2%) 
           4: cpu: 0.4% command: gtkdialog pid: 7664 mem: 26.9 MiB (0.1%) 
           5: cpu: 0.2% command: conky pid: 2447 mem: 15.7 MiB (0.0%) 
           Memory top: 5 
           1: mem: 358.9 MiB (2.2%) command: firefox-esr pid: 4483 cpu: 7.3% 
           2: mem: 204.2 MiB (1.2%) command: firefox-esr pid: 4623 cpu: 0.7% 
           3: mem: 121.6 MiB (0.7%) command: xorg pid: 2099 cpu: 2.7% 
           4: mem: 90.4 MiB (0.5%) command: firefox-esr pid: 7196 cpu: 0.0% 
           5: mem: 34.7 MiB (0.2%) command: i3 pid: 2388 cpu: 0.0% 
Info:      Processes: 278 Uptime: 21m Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: 
           gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.0.36 
```
- This reply was modified 2 years, 3 months ago by ex_Koo.
February 6, 2021 at 7:06 pm #54009

Topic: No NVIDIA driver for 900 series ?

in forum antiX-19 “Marielle Franco, Hannie Schaft, Manolis Glezos, Grup Yorum, Wobblies”
Member
Wallon
Hello,

I can’t install an NVIDIA driver for the 900 series (the exact reference is GTX960 launched in 2015)
I go through the Nvidia Driver Installer in the Control Center.
Here is what it has been offering me for several weeks.
```
Installed is:  (none)

Which driver do you wish to install

Main repos or debian-backports?

1: Main 418.181.07-1

2: MX Test 460.39-1~bpo10+1

3: Exit

Enter Number of selection
```
The 418 driver does not install. This driver is quite old.
I tried to install driver 460 (test) but it gives me a black screen.
I tried several kernels but it doesn’t change anything, I still get the 2 drivers 418 and 460 test.
With MX Linux, I use the 450 driver which works really well because I use for example the Webrender for hardware acceleration in Firefox.

You can guess that I would like to install driver 450 to remove the screen tearing that annoys me on my screen.

Best regards,
Wallon
```
System:    Host: MSI Kernel: 4.19.152-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.152-antix.1-amd64-smp 
           root=UUID=7da674d4-292a-42aa-b0a5-dd717bc90c00 ro quiet 
           Desktop: IceWM 2.1.1 dm: SLiM 1.3.6 
           Distro: antiX-19.3_x64-full Manolis Glezos 15 October 2020 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Desktop Mobo: MSI model: H170M PRO-VDH (MS-7982) v: 1.0 serial: <filter> 
           UEFI [Legacy]: American Megatrends v: 2.A0 date: 07/27/2016 
Memory:    RAM: total: 15.61 GiB used: 709.8 MiB (4.4%) 
           RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. 
CPU:       Topology: Quad Core model: Intel Core i5-6400 bits: 64 type: MCP arch: Skylake-S 
           family: 6 model-id: 5E (94) stepping: 3 microcode: D6 L2 cache: 6144 KiB 
           bogomips: 21696 
           Speed: 2115 MHz min/max: 800/3300 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 
           Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art avx avx2 
           bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl 
           dtes64 dtherm dts ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr 
           ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single 
           lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat 
           pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdrand rdseed 
           rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall 
           tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq vme vmx vnmi vpid 
           x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr 
           Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled 
           Type: mds mitigation: Clear CPU buffers; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: 
           disabled, RSB filling 
           Type: srbds status: Vulnerable: No microcode 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA GM206 [GeForce GTX 960] vendor: Micro-Star MSI driver: nouveau 
           v: kernel bus ID: 01:00.0 chip ID: 10de:1401 
           Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: NV126 v: 4.3 Mesa 18.3.6 direct render: Yes 
Audio:     Device-1: Intel Sunrise Point-H HD Audio 
           vendor: Micro-Star MSI 100 Series/C230 Series Family driver: snd_hda_intel v: kernel 
           bus ID: 00:1f.3 chip ID: 8086:a170 
           Device-2: NVIDIA GM206 High Definition Audio vendor: Micro-Star MSI 
           driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 10de:0fba 
           Device-3: Logitech HD Pro Webcam C920 type: USB driver: snd-usb-audio,uvcvideo 
           bus ID: 1-6:3 chip ID: 046d:082d serial: <filter> 
           Sound Server: ALSA v: k4.19.152-antix.1-amd64-smp 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI 
           driver: r8169 v: kernel port: d000 bus ID: 02:00.0 chip ID: 10ec:8168 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           IP v4: <filter> scope: global broadcast: <filter> 
           IP v6: <filter> type: dynamic mngtmpaddr scope: global 
           IP v6: <filter> scope: link 
           WAN IP: <filter> 
Drives:    Local Storage: total: 1.16 TiB used: 5.49 GiB (0.5%) 
           ID-1: /dev/sda vendor: Kingston model: SUV400S37240G size: 223.57 GiB block size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: D6SD scheme: GPT 
           ID-2: /dev/sdb vendor: Seagate model: ST1000DM003-1SB102 size: 931.51 GiB block size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> 
           rev: CC43 scheme: GPT 
           ID-3: /dev/sdc type: USB vendor: SanDisk model: Extreme size: 29.82 GiB block size: 
           physical: 512 B logical: 512 B serial: <filter> rev: 0001 scheme: MBR 
           Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GH24NSD1 rev: LG00 
           dev-links: cdrom,cdrw,dvd,dvdrw 
           Features: speed: 12 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram 
           state: running 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 25.85 GiB size: 25.44 GiB (98.43%) used: 5.49 GiB (21.6%) fs: ext2 
           dev: /dev/sdc3 label: rootantiXb uuid: 7da674d4-292a-42aa-b0a5-dd717bc90c00 
           ID-2: /media/an/sdc2-usb-SanDisk_Extreme_ raw size: 1.97 GiB size: 1.97 GiB (99.80%) 
           used: 1.3 MiB (0.1%) fs: vfat dev: /dev/sdc2 label: N/A uuid: A026-227D 
           ID-3: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 10 (default 60) 
           cache pressure: 50 (default 100) dev: /dev/sdc1 label: N/A 
           uuid: 7a9849a2-51d6-4ba3-b83c-b81827894a3d 
Unmounted: ID-1: /dev/sda1 size: 450.0 MiB fs: ntfs label: N/A uuid: 767C9A4C7C9A0751 
           ID-2: /dev/sda2 size: 99.0 MiB fs: vfat label: N/A uuid: CA5D-855D 
           ID-3: /dev/sda3 size: 16.0 MiB fs: <root required> label: N/A uuid: N/A 
           ID-4: /dev/sda4 size: 222.51 GiB fs: ntfs label: N/A uuid: 460E63F10E63D907 
           ID-5: /dev/sda5 size: 521.0 MiB fs: ntfs label: N/A uuid: F2844E49844E1091 
           ID-6: /dev/sdb1 size: 128.0 MiB fs: <root required> label: N/A uuid: N/A 
           ID-7: /dev/sdb2 size: 931.39 GiB fs: ntfs label: HDD 1To uuid: 6640C99340C969FF 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Device-1: 1-5:15 info: MGE UPS Systems UPS type: HID driver: hid-generic,usbhid 
           interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 0463:ffff serial: <filter> 
           Device-2: 1-6:3 info: Logitech HD Pro Webcam C920 type: Video,Audio 
           driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 046d:082d serial: <filter> 
           Device-3: 1-9:4 info: Logitech M105 Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c077 
           Device-4: 1-10:5 info: Microsoft Wired Keyboard 600 (model 1576) type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:07f8 
           Device-5: 1-12:6 info: Genesys Logic USB 2.0 Multislot Card Reader/Writer 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0716 serial: <filter> 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-6: 2-1:2 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5580 serial: <filter> 
Sensors:   System Temperatures: cpu: 39.5 C mobo: 29.8 C gpu: nouveau temp: 38 C 
           Fan Speeds (RPM): N/A gpu: nouveau fan: 0 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http: //mirror.tiguinet.net/mx/packages/antix/buster buster main nonfree nosystemd
           Active apt repos in: /etc/apt/sources.list.d/buster-backports.list 
           1: deb http: //deb.debian.org/debian buster-backports main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http: //ftp.be.debian.org/debian/ buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http: //ftp.be.debian.org/debian/ buster main contrib non-free
           2: deb http: //security.debian.org/ buster/updates main contrib non-free
           No active apt repos in: /etc/apt/sources.list.d/onion.list 
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 
           1: cpu: 9.8% command: chromium pid: 9667 mem: 182.8 MiB (1.1%) 
           2: cpu: 8.0% command: yad pid: 13913 mem: 27.2 MiB (0.1%) 
           3: cpu: 4.7% command: chromium pid: 9654 mem: 180.3 MiB (1.1%) 
           4: cpu: 3.9% command: app-select started by: python3 pid: 13846 mem: 44.8 MiB (0.2%) 
           5: cpu: 2.6% command: xorg pid: 3005 mem: 81.7 MiB (0.5%) 
           Memory top: 5 
           1: mem: 285.0 MiB (1.7%) command: chromium pid: 9465 cpu: 2.4% 
           2: mem: 183.5 MiB (1.1%) command: chromium pid: 9505 cpu: 0.4% 
           3: mem: 182.8 MiB (1.1%) command: chromium pid: 9667 cpu: 9.8% 
           4: mem: 180.3 MiB (1.1%) command: chromium pid: 9654 cpu: 4.7% 
           5: mem: 144.2 MiB (0.9%) command: chromium pid: 9549 cpu: 0.3% 
Info:      Processes: 168 Uptime: 50m Init: SysVinit v: 2.93 runlevel: 5 default: 5 Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.36 
```
February 6, 2021 at 6:53 pm #54007

Topic: No NVIDIA driver for series 900 ?

in forum antiX-19 “Marielle Franco, Hannie Schaft, Manolis Glezos, Grup Yorum, Wobblies”
Member
Wallon
Hello,

I can’t install an NVIDIA driver for the 900 series (the exact reference is GTX960 launched in 2015)
I go through the Nvidia Driver Installer in the Control Center.
Here is what it has been offering me for several weeks.
```
Main repo candidate is:   418.181.07-1
Debian backports candidate is:   460.39-1~bpo10+1
Installed is:  (none)

Which driver do you wish to install

Main repos or debian-backports?

1: Main 418.181.07-1

2: MX Test 460.39-1~bpo10+1

3: Exit

Enter Number of selection
```
The 418 driver does not install. This driver is quite old.
I tried to install driver 460 (test) but it gives me a black screen.
I tried several kernels but it doesn’t change anything, I still get the 2 drivers 418 and 460 test.
With MX Linux, I use the 450 driver which works really well because I use for example the Webrender for hardware acceleration in Firefox.

You can guess that I would like to install driver 450 to remove the screen tearing that annoys me on my screen.

Best regards,
```
System:    Host: MSI Kernel: 4.19.152-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.152-antix.1-amd64-smp 
           root=UUID=7da674d4-292a-42aa-b0a5-dd717bc90c00 ro quiet 
           Desktop: IceWM 2.1.1 dm: SLiM 1.3.6 
           Distro: antiX-19.3_x64-full Manolis Glezos 15 October 2020 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Desktop Mobo: MSI model: H170M PRO-VDH (MS-7982) v: 1.0 serial: <filter> 
           UEFI [Legacy]: American Megatrends v: 2.A0 date: 07/27/2016 
Memory:    RAM: total: 15.61 GiB used: 709.8 MiB (4.4%) 
           RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. 
CPU:       Topology: Quad Core model: Intel Core i5-6400 bits: 64 type: MCP arch: Skylake-S 
           family: 6 model-id: 5E (94) stepping: 3 microcode: D6 L2 cache: 6144 KiB 
           bogomips: 21696 
           Speed: 2115 MHz min/max: 800/3300 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 
           Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art avx avx2 
           bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl 
           dtes64 dtherm dts ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr 
           ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single 
           lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat 
           pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdrand rdseed 
           rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall 
           tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq vme vmx vnmi vpid 
           x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr 
           Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled 
           Type: mds mitigation: Clear CPU buffers; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: 
           disabled, RSB filling 
           Type: srbds status: Vulnerable: No microcode 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA GM206 [GeForce GTX 960] vendor: Micro-Star MSI driver: nouveau 
           v: kernel bus ID: 01:00.0 chip ID: 10de:1401 
           Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: NV126 v: 4.3 Mesa 18.3.6 direct render: Yes 
Audio:     Device-1: Intel Sunrise Point-H HD Audio 
           vendor: Micro-Star MSI 100 Series/C230 Series Family driver: snd_hda_intel v: kernel 
           bus ID: 00:1f.3 chip ID: 8086:a170 
           Device-2: NVIDIA GM206 High Definition Audio vendor: Micro-Star MSI 
           driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 10de:0fba 
           Device-3: Logitech HD Pro Webcam C920 type: USB driver: snd-usb-audio,uvcvideo 
           bus ID: 1-6:3 chip ID: 046d:082d serial: <filter> 
           Sound Server: ALSA v: k4.19.152-antix.1-amd64-smp 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI 
           driver: r8169 v: kernel port: d000 bus ID: 02:00.0 chip ID: 10ec:8168 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           IP v4: <filter> scope: global broadcast: <filter> 
           IP v6: <filter> type: dynamic mngtmpaddr scope: global 
           IP v6: <filter> scope: link 
           WAN IP: <filter> 
Drives:    Local Storage: total: 1.16 TiB used: 5.49 GiB (0.5%) 
           ID-1: /dev/sda vendor: Kingston model: SUV400S37240G size: 223.57 GiB block size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: D6SD scheme: GPT 
           ID-2: /dev/sdb vendor: Seagate model: ST1000DM003-1SB102 size: 931.51 GiB block size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> 
           rev: CC43 scheme: GPT 
           ID-3: /dev/sdc type: USB vendor: SanDisk model: Extreme size: 29.82 GiB block size: 
           physical: 512 B logical: 512 B serial: <filter> rev: 0001 scheme: MBR 
           Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GH24NSD1 rev: LG00 
           dev-links: cdrom,cdrw,dvd,dvdrw 
           Features: speed: 12 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram 
           state: running 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 25.85 GiB size: 25.44 GiB (98.43%) used: 5.49 GiB (21.6%) fs: ext2 
           dev: /dev/sdc3 label: rootantiXb uuid: 7da674d4-292a-42aa-b0a5-dd717bc90c00 
           ID-2: /media/an/sdc2-usb-SanDisk_Extreme_ raw size: 1.97 GiB size: 1.97 GiB (99.80%) 
           used: 1.3 MiB (0.1%) fs: vfat dev: /dev/sdc2 label: N/A uuid: A026-227D 
           ID-3: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 10 (default 60) 
           cache pressure: 50 (default 100) dev: /dev/sdc1 label: N/A 
           uuid: 7a9849a2-51d6-4ba3-b83c-b81827894a3d 
Unmounted: ID-1: /dev/sda1 size: 450.0 MiB fs: ntfs label: N/A uuid: 767C9A4C7C9A0751 
           ID-2: /dev/sda2 size: 99.0 MiB fs: vfat label: N/A uuid: CA5D-855D 
           ID-3: /dev/sda3 size: 16.0 MiB fs: <root required> label: N/A uuid: N/A 
           ID-4: /dev/sda4 size: 222.51 GiB fs: ntfs label: N/A uuid: 460E63F10E63D907 
           ID-5: /dev/sda5 size: 521.0 MiB fs: ntfs label: N/A uuid: F2844E49844E1091 
           ID-6: /dev/sdb1 size: 128.0 MiB fs: <root required> label: N/A uuid: N/A 
           ID-7: /dev/sdb2 size: 931.39 GiB fs: ntfs label: HDD 1To uuid: 6640C99340C969FF 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Device-1: 1-5:15 info: MGE UPS Systems UPS type: HID driver: hid-generic,usbhid 
           interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 0463:ffff serial: <filter> 
           Device-2: 1-6:3 info: Logitech HD Pro Webcam C920 type: Video,Audio 
           driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 046d:082d serial: <filter> 
           Device-3: 1-9:4 info: Logitech M105 Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c077 
           Device-4: 1-10:5 info: Microsoft Wired Keyboard 600 (model 1576) type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:07f8 
           Device-5: 1-12:6 info: Genesys Logic USB 2.0 Multislot Card Reader/Writer 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0716 serial: <filter> 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-6: 2-1:2 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5580 serial: <filter> 
Sensors:   System Temperatures: cpu: 39.5 C mobo: 29.8 C gpu: nouveau temp: 38 C 
           Fan Speeds (RPM): N/A gpu: nouveau fan: 0 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http: //mirror.tiguinet.net/mx/packages/antix/buster buster main nonfree nosystemd
           Active apt repos in: /etc/apt/sources.list.d/buster-backports.list 
           1: deb http: //deb.debian.org/debian buster-backports main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http: //ftp.be.debian.org/debian/ buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http: //ftp.be.debian.org/debian/ buster main contrib non-free
           2: deb http: //security.debian.org/ buster/updates main contrib non-free
           No active apt repos in: /etc/apt/sources.list.d/onion.list 
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 
           1: cpu: 9.8% command: chromium pid: 9667 mem: 182.8 MiB (1.1%) 
           2: cpu: 8.0% command: yad pid: 13913 mem: 27.2 MiB (0.1%) 
           3: cpu: 4.7% command: chromium pid: 9654 mem: 180.3 MiB (1.1%) 
           4: cpu: 3.9% command: app-select started by: python3 pid: 13846 mem: 44.8 MiB (0.2%) 
           5: cpu: 2.6% command: xorg pid: 3005 mem: 81.7 MiB (0.5%) 
           Memory top: 5 
           1: mem: 285.0 MiB (1.7%) command: chromium pid: 9465 cpu: 2.4% 
           2: mem: 183.5 MiB (1.1%) command: chromium pid: 9505 cpu: 0.4% 
           3: mem: 182.8 MiB (1.1%) command: chromium pid: 9667 cpu: 9.8% 
           4: mem: 180.3 MiB (1.1%) command: chromium pid: 9654 cpu: 4.7% 
           5: mem: 144.2 MiB (0.9%) command: chromium pid: 9549 cpu: 0.3% 
Info:      Processes: 168 Uptime: 50m Init: SysVinit v: 2.93 runlevel: 5 default: 5 Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.36 
```
- This topic was modified 2 years, 3 months ago by Wallon.
February 3, 2021 at 10:55 pm #51446

In reply to: second monitor, no image
Member
zeh
It’s my first time trying to use a second monitor with this old machine (I use two monitors with another machine running MX) and I’d not realized arandr deals with this as well and not only resolutions. Tried as suggested and got the same result as with disper – the system recognizes the second monitor but there is no video there.

I’m not using the testing repo.

$ inxi -r
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://repo.antixlinux.com/stretch stretch main nosystemd nonfree
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.uk.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.uk.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/mx.list
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.list

Edit: I’ve downloaded the 96.43.23 driver and I’m going to try to install it and see if it will work.
- This reply was modified 2 years, 3 months ago by zeh.
- This reply was modified 2 years, 3 months ago by zeh.
February 3, 2021 at 6:21 am #51382

In reply to: PFO Back with older HP Laptop
Member
PFO
˝6 pages of goal-post moving…
the OP does not acknowledge help the help/feedback offered
(e.g. login credentials are NOT suddenly being rejected),
instead just posts up some further, unrelated, off-the-wall “diddy-wack”

To me, it now seems both apropriate and overdue to suggest
“MicroSlave bulk wash and reinstall” (or whatever phrase the OP used)˝

Skiddoo,

I’m sorry this frustrates you, but I simply do not understand Linux terms so I must ask questions to elicit suggestions that I comprehend and can implement. Per your suggestion, here is the System ‘Read-out’ – tho that’s not what itś called:

System:
Host: antix1 Kernel: 4.9.212-antix.1-486-smp i686 bits: 32
Desktop: IceWM 2.1.1
Distro: antiX-19.2.1_386-base Hannie Schaft 29 March 2020
Machine:
Type: Laptop System: Hewlett-Packard
product: HP Compaq nx6110 (EK048ES#AKN) v: F.0A serial: <filter>
Mobo: Hewlett-Packard model: 3088 v: KBC Version 39.1C serial: <filter>
BIOS: Hewlett-Packard v: 68DTD Ver. F.0A date: 07/25/2005
Battery:
ID-1: C171 charge: 7.1 Wh condition: 7.4/7.4 Wh (100%)
CPU:
Topology: Single Core model: Intel Celeron M bits: 32 type: MCP
L2 cache: 1024 KiB
Speed: 1500 MHz min/max: N/A Core speed (MHz): 1: 1500
Graphics:
Device-1: Intel Mobile 915GM/GMS/910GML Express Graphics driver: i915
v: kernel
Display: x11 server: X.Org 1.20.4 driver: intel
unloaded: fbdev,modesetting,vesa resolution: 1024×768~60Hz
OpenGL: renderer: Mesa DRI Intel 915GM x86/MMX/SSE2 v: 1.4 Mesa 18.3.6
Audio:
Device-1: Intel 82801FB/FBM/FR/FW/FRW AC97 Audio driver: snd_intel8x0
Sound Server: ALSA v: k4.9.212-antix.1-486-smp
Network:
Device-1: Broadcom Limited BCM4318 [AirForce One 54g] 802.11g Wireless LAN
driver: b43-pci-bridge
Device-2: Broadcom Limited BCM4401-B0 100Base-TX driver: b44
IF-ID-1: eth0 state: down mac: <filter>
IF-ID-2: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 55.89 GiB used: 8.71 GiB (15.6%)
ID-1: /dev/sda vendor: Hitachi model: IC25N060ATMR04-0 size: 55.89 GiB
Partition:
ID-1: / size: 44.29 GiB used: 8.71 GiB (19.7%) fs: ext4 dev: /dev/sda2
Sensors:
System Temperatures: cpu: 48.0 C mobo: 37.0 C
Fan Speeds (RPM): N/A
Repos:
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://mirror.easyname.at/mxlinux-packages/antix/buster/ buster main nonfree nosystemd
Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
1: deb http://deb.debian.org/debian buster-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.us.debian.org/debian/ buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.us.debian.org/debian/ buster main contrib non-free
2: deb http://security.debian.org/ buster/updates main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/onion.list
Active apt repos in: /etc/apt/sources.list.d/softmaker.list
1: deb http://shop.softmaker.com/repo/apt wheezy non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info:
Processes: 134 Uptime: 39m Memory: 486.1 MiB used: 258.6 MiB (53.2%)
Shell: bash inxi: 3.0.36
January 21, 2021 at 10:02 am #50295

Topic: Timeshift doesn’t work with Antix ?

in forum New Users and General Questions
Member
Wallon
Dear All,

I have installed Timeshift to do a backup but it doesn’t work.
Is it possible to use Timeshift ?
I don’t like to use an snapshot (iso) because the file fstab is modified and some times, I can’t reinstall the iso (Bios or Legacy or EFI not compatible)

———————————————————–
Here it is my installation (apparently all was good);

$ sudo apt install timeshift
Lecture des listes de paquets… Fait
Construction de l’arbre des dépendances
Lecture des informations d’état… Fait
Les paquets supplémentaires suivants seront installés :
libgee-0.8-2
Les NOUVEAUX paquets suivants seront installés :
libgee-0.8-2 timeshift
0 mis à jour, 2 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 874 ko dans les archives.
Après cette opération, 4.053 ko d’espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] O
Réception de :1 http://ftp.be.debian.org/debian buster/main amd64 libgee-0.8-2 amd64 0.20.1-2 [230 kB]
Réception de :2 http://ftp.be.debian.org/debian buster/main amd64 timeshift amd64 19.01+ds-2+deb10u1 [643 kB]
874 ko réceptionnés en 0s (2.187 ko/s)
Sélection du paquet libgee-0.8-2:amd64 précédemment désélectionné.
(Lecture de la base de données… 184316 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de …/libgee-0.8-2_0.20.1-2_amd64.deb …
Dépaquetage de libgee-0.8-2:amd64 (0.20.1-2) …
Sélection du paquet timeshift précédemment désélectionné.
Préparation du dépaquetage de …/timeshift_19.01+ds-2+deb10u1_amd64.deb …
Dépaquetage de timeshift (19.01+ds-2+deb10u1) …
Paramétrage de libgee-0.8-2:amd64 (0.20.1-2) …
Paramétrage de timeshift (19.01+ds-2+deb10u1) …
Traitement des actions différées (« triggers ») pour desktop-file-utils (0.23-4) …
Traitement des actions différées (« triggers ») pour mime-support (3.62) …
Traitement des actions différées (« triggers ») pour hicolor-icon-theme (0.17-2) …
Traitement des actions différées (« triggers ») pour libc-bin (2.28-10) …
Writing Menu: fluxbox
Writing Menu: icewm
Writing Menu: jwm

—————————————————————————————-
Please find the laptop info;

System: Host: ASUS Kernel: 4.9.240-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 8.3.0
parameters: BOOT_IMAGE=/boot/vmlinuz-4.9.240-antix.1-amd64-smp
root=UUID=3cafe92e-aadc-43da-b08c-f785f80ec609 ro gfxsave quiet
Desktop: IceWM 2.0.1 dm: SLiM 1.3.6
Distro: antiX-19.3_x64-full Manolis Glezos 15 October 2020
base: Debian GNU/Linux 10 (buster)
Machine: Type: Laptop System: ASUSTeK product: F3U v: 1.0 serial: <filter> Chassis: type: 10
serial: <filter>
Mobo: ASUSTeK model: F3U v: 1.0 serial: <filter> BIOS: American Megatrends v: 208
date: 07/18/2007
Battery: ID-1: BAT0 charge: 7.5 Wh condition: 7.5/51.3 Wh (15%) volts: 12.5/11.1
model: ASUSTEK F3—24 type: Li-ion serial: <filter> status: Full
Memory: RAM: total: 1.71 GiB used: 586.9 MiB (33.5%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots: Permissions: Unable to run dmidecode. Root privileges required.
CPU: Topology: Dual Core model: AMD Athlon 64 X2 TK-55 bits: 64 type: MCP arch: K8 rev.F+
family: F (15) model-id: 68 (104) stepping: 1 microcode: N/A L2 cache: 512 KiB
bogomips: 6383
Speed: 1600 MHz min/max: 800/1800 MHz Core speeds (MHz): 1: 1600 2: 1600
Flags: 3dnow 3dnowext 3dnowprefetch apic clflush cmov cmp_legacy cr8_legacy cx16 cx8 de
extapic extd_apicid fpu fxsr fxsr_opt ht lahf_lm lbrv lm mca mce mmx mmxext msr mtrr
nopl nx pae pat pge pni pse pse36 rdtscp rep_good sep sse sse2 svm syscall tsc vme
vmmcall
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass status: Not affected
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD RS690M [Radeon Xpress 1200/1250/1270] vendor: ASUSTeK driver: radeon
v: kernel bus ID: 01:05.0 chip ID: 1002:791f
Display: x11 server: X.Org 1.20.4 driver: radeon resolution: 1280×800~60Hz
OpenGL: renderer: ATI RS690 v: 2.1 Mesa 18.3.6 direct render: Yes
Audio: Device-1: AMD SBx00 Azalia vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 00:14.2 chip ID: 1002:4383
Sound Server: ALSA v: k4.9.240-antix.1-amd64-smp
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK
driver: r8169 v: 2.3LK-NAPI port: b800 bus ID: 05:00.0 chip ID: 10ec:8168
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> type: dynamic mngtmpaddr scope: global
IP v6: <filter> scope: link
Device-2: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter driver: ath5k
v: kernel port: b800 bus ID: 06:00.0 chip ID: 168c:001c
IF: wlan0 state: down mac: <filter>
WAN IP: <filter>
Drives: Local Storage: total: 140.44 GiB used: 5.95 GiB (4.2%)
ID-1: /dev/sda vendor: Seagate model: ST9120822AS size: 111.79 GiB block size:
physical: 512 B logical: 512 B speed: 1.5 Gb/s serial: <filter> rev: C scheme: MBR
ID-2: /dev/sdb type: USB vendor: SanDisk model: USB 3.2Gen1 size: 28.65 GiB block size:
physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR
Optical-1: /dev/sr0 vendor: MATSHITA model: DVD-RAM UJ-850S rev: 1.22
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram
state: running
RAID: Message: No RAID data was found.
Partition: ID-1: / raw size: 24.41 GiB size: 24.03 GiB (98.43%) used: 5.94 GiB (24.7%) fs: ext2
dev: /dev/sdb2 label: rootantiX uuid: 3cafe92e-aadc-43da-b08c-f785f80ec609
ID-2: /media/an/DATAWIN raw size: 2.24 GiB size: 2.23 GiB (99.80%) used: 1.3 MiB (0.1%)
fs: vfat dev: /dev/sdb3 label: DATAWIN uuid: 0AE6-1BAB
ID-3: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 10 (default 60)
cache pressure: 50 (default 100) dev: /dev/sdb1 label: SWAP
uuid: 8e0bee22-319d-44fd-95ed-db7522af6734
Unmounted: ID-1: /dev/sda1 size: 6.84 GiB fs: vfat label: RECOVERY uuid: 1489-5F00
ID-2: /dev/sda2 size: 67.07 GiB fs: ntfs label: VistaOS uuid: A4448C70448C46D0
ID-3: /dev/sda3 size: 1 KiB fs: <root required> label: N/A uuid: N/A
ID-4: /dev/sda5 size: 37.88 GiB fs: ntfs label: DATA uuid: 7458901B588FDA6E
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Device-1: 1-1:2 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage
interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5591 serial: <filter>
Device-2: 1-7:4 info: Microdia PC Camera (SN9C201 + OV9650) type: <vendor specific>
driver: gspca_sn9c20x interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0c45:624f
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 2-2:2 info: Ortek Targus Number Keypad ports: 3 rev: 1.1 speed: 12 Mb/s
chip ID: 05a4:9837
Device-3: 2-2.2:3 info: Logitech Optical Tilt Wheel Mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c019
Device-4: 2-2.3:4 info: Ortek Targus Number Keypad (Composite Device)
type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 05a4:9862
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Sensors: System Temperatures: cpu: 57.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http: //it.mxrepo.com/antix/buster/ buster main nonfree nosystemd
No active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
1: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http: //ftp.be.debian.org/debian/ buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http: //ftp.be.debian.org/debian/ buster main contrib non-free
2: deb http: //security.debian.org/ buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/eid.list
1: deb http: //files.eid.belgium.be/debian/ buster main
2: deb http: //files2.eid.belgium.be/debian/ buster main
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] http: //dl.google.com/linux/chrome/deb/ stable main
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.list
Processes: CPU top: 5
1: cpu: 71.0% command: chromium pid: 4821 mem: 174.0 MiB (9.9%)
2: cpu: 32.0% command: yad pid: 6906 mem: 28.4 MiB (1.6%)
3: cpu: 6.6% command: chromium pid: 4537 mem: 295.1 MiB (16.8%)
4: cpu: 6.2% command: chromium pid: 4586 mem: 61.8 MiB (3.5%)
5: cpu: 5.0% command: xorg pid: 2584 mem: 72.6 MiB (4.1%)
Memory top: 5
1: mem: 295.1 MiB (16.8%) command: chromium pid: 4537 cpu: 6.6%
2: mem: 180.3 MiB (10.2%) command: chromium pid: 4589 cpu: 0.6%
3: mem: 174.0 MiB (9.9%) command: chromium pid: 4821 cpu: 71.0%
4: mem: 141.7 MiB (8.0%) command: chromium pid: 4631 cpu: 2.6%
5: mem: 104.1 MiB (5.9%) command: chromium pid: 4560 cpu: 0.0%
Info: Processes: 174 Uptime: 20m Init: SysVinit v: 2.93 runlevel: 5 default: 5 Compilers:
gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.36

Thank you for your support.
Best regards,
Wallon.
January 21, 2021 at 1:12 am #50243

Topic: Window “add-desktop” – not the same options in English versus French – Bug ?

in forum New Users and General Questions
Member
Wallon
Hello,

I’m new on this forum and sorry if I do some mistakes in English. French is my mother tong.
I’m a little bit trouble because I have noticed that “antiX 19 Full” has not the same options in English and in French in the window “add-desktop”.
I have tested my USB Live on my desktop (Intel i5-6400) and tested also my old laptop (Amd Athlon) with antiX installed. It’s not the same kernel for both and I have the same issue.
To be sure;
1) Icon “Favorite Application”
2) Applications
3) Preferences
4) Add Menu Item
5) In the window “add-desktop”, the line “Item Location”, we can choose;
-> 1) Application Menu
or
-> 2) Desktop Shortcut
or
-> 3) Personal.

But for antiX 19 in french, In the window “add-desktop”, the line “Item Location”, it’s impossible to choose something. All the options are on the same line and the narrow at the end of line is not activated. Please, find attached my 2 screenshots (English versus french)

Here it is my full info of my desktop (Intel) with the AntiX USB Live
———————————————————————
System: Host: antix1 Kernel: 4.9.235-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 8.3.0
parameters: quiet splasht disable=lxF
Desktop: IceWM 1.8.3 dm: SLiM 1.3.6
Distro: antiX-19.3_x64-full Manolis Glezos 15 October 2020
base: Debian GNU/Linux 10 (buster)
Machine: Type: Desktop Mobo: MSI model: H170M PRO-VDH (MS-7982) v: 1.0 serial: <filter>
UEFI [Legacy]: American Megatrends v: 2.A0 date: 07/27/2016
Memory: RAM: total: 15.62 GiB used: 284.0 MiB (1.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots: Permissions: Unable to run dmidecode. Root privileges required.
CPU: Topology: Quad Core model: Intel Core i5-6400 bits: 64 type: MCP arch: Skylake-S
family: 6 model-id: 5E (94) stepping: 3 microcode: D6 L2 cache: 6144 KiB
bogomips: 21696
Speed: 981 MHz min/max: 800/3300 MHz Core speeds (MHz): 1: 981 2: 800 3: 1478 4: 1477
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art avx avx2
bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts
ept erms est f16c flexpriority fma fpu fsgsbase fxsr ht hwp hwp_act_window hwp_epp
hwp_notify ida intel_pt invpcid invpcid_single kaiser lahf_lm lm mca mce mmx monitor
movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge
pln pni popcnt pse pse36 pts rdrand rdseed rdtscp rep_good sdbg sep smap smep ss sse
sse2 sse4_1 sse4_2 ssse3 syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer
vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: NVIDIA GM206 [GeForce GTX 960] vendor: Micro-Star MSI driver: nouveau
v: kernel bus ID: 01:00.0 chip ID: 10de:1401
Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa
resolution: 1920×1080~60Hz
OpenGL: renderer: NV126 v: 4.3 Mesa 18.3.6 direct render: Yes
Audio: Device-1: Intel Sunrise Point-H HD Audio
vendor: Micro-Star MSI 100 Series/C230 Series Family driver: snd_hda_intel v: kernel
bus ID: 00:1f.3 chip ID: 8086:a170
Device-2: NVIDIA GM206 High Definition Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 10de:0fba
Device-3: Logitech HD Pro Webcam C920 type: USB driver: snd-usb-audio,uvcvideo
bus ID: 1-6:3 chip ID: 046d:082d serial: <filter>
Sound Server: ALSA v: k4.9.235-antix.1-amd64-smp
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI
driver: r8169 v: 2.3LK-NAPI port: d000 bus ID: 02:00.0 chip ID: 10ec:8168
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> type: dynamic mngtmpaddr scope: global
IP v6: <filter> scope: link
WAN IP: <filter>
Drives: Local Storage: total: 1.38 TiB used: 8.91 GiB (0.6%)
ID-1: /dev/sda vendor: Kingston model: SUV400S37240G size: 223.57 GiB block size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: D6SD scheme: GPT
ID-2: /dev/sdb vendor: Seagate model: ST1000DM003-1SB102 size: 931.51 GiB block size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter>
rev: CC43 scheme: GPT
ID-3: /dev/sdc type: USB model: USB DISK 2.0 size: 29.83 GiB block size:
physical: 512 B logical: 512 B serial: <filter> rev: DL07 scheme: MBR
ID-4: /dev/sdi type: USB vendor: SanDisk model: SD9SN8W256G size: 232.89 GiB
block size: physical: 4096 B logical: 512 B serial: <filter> rev: 1012 scheme: MBR
Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GH24NSD1 rev: LG00
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 12 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram
state: running
RAID: Message: No RAID data was found.
Partition: ID-1: / raw size: N/A size: 12.45 GiB used: 32.0 MiB (0.3%) fs: overlay source: ERR-102
label: N/A uuid: N/A
ID-2: /live/boot-dev raw size: 29.83 GiB size: <root required> used: <root required>
fs: vfat dev: /dev/sdc1 label: INTUIX 16MO uuid: C4C9-D07C
ID-3: /live/linux raw size: 1.11 GiB size: <root required> used: <root required>
fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A
ID-4: /media/demo/DataLinux raw size: 188.88 GiB size: 188.88 GiB (100.00%)
used: 101.5 MiB (0.1%) fs: ntfs dev: /dev/sdi3 label: DataLinux uuid: 45E6718D5B4AA9FF
ID-5: /media/demo/rootMX raw size: 40.00 GiB size: 39.12 GiB (97.81%)
used: 8.78 GiB (22.4%) fs: ext4 dev: /dev/sdi2 label: rootMX
uuid: 5f41a82a-ff58-42e6-ba79-7852d0c687a0
Unmounted: ID-1: /dev/sda1 size: 450.0 MiB fs: ntfs label: N/A uuid: 767C9A4C7C9A0751
ID-2: /dev/sda2 size: 99.0 MiB fs: vfat label: N/A uuid: CA5D-855D
ID-3: /dev/sda3 size: 16.0 MiB fs: <root required> label: N/A uuid: N/A
ID-4: /dev/sda4 size: 222.51 GiB fs: ntfs label: N/A uuid: 460E63F10E63D907
ID-5: /dev/sda5 size: 521.0 MiB fs: ntfs label: N/A uuid: F2844E49844E1091
ID-6: /dev/sdb1 size: 128.0 MiB fs: <root required> label: N/A uuid: N/A
ID-7: /dev/sdb2 size: 931.39 GiB fs: ntfs label: HDD 1To uuid: 6640C99340C969FF
ID-8: /dev/sdc2 size: 31 KiB fs: <root required> label: N/A uuid: N/A
ID-9: /dev/sdi1 size: 4.00 GiB fs: swap label: N/A
uuid: 5e76f17c-ea8b-4647-929a-6f0c2fef371c
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Device-1: 1-5:12 info: MGE UPS Systems UPS type: HID driver: hid-generic,usbhid
interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 0463:ffff serial: <filter>
Device-2: 1-6:3 info: Logitech HD Pro Webcam C920 type: Video,Audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
chip ID: 046d:082d serial: <filter>
Device-3: 1-8:4 info: Kingston Flash drive type: Mass Storage driver: usb-storage
interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 13fe:4100 serial: <filter>
Device-4: 1-9:5 info: Logitech M105 Optical Mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c077
Device-5: 1-10:6 info: Microsoft Wired Keyboard 600 (model 1576) type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:07f8
Device-6: 1-12:7 info: Genesys Logic USB 2.0 Multislot Card Reader/Writer
type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s
chip ID: 05e3:0716 serial: <filter>
Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.0 speed: 5 Gb/s
chip ID: 1d6b:0003
Device-7: 2-1:2 info: SanDisk type: Mass Storage driver: uas interfaces: 1 rev: 3.1
speed: 5 Gb/s chip ID: 0781:558c serial: <filter>
Sensors: System Temperatures: cpu: 29.8 C mobo: 27.8 C
Fan Speeds (RPM): N/A
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http: //la.mxrepo.com/antix/buster buster main nonfree nosystemd
Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
1: deb http: //deb.debian.org/debian buster-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http: //ftp.us.debian.org/debian/ buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http: //ftp.us.debian.org/debian/ buster main contrib non-free
2: deb http: //security.debian.org/ buster/updates main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.list
Processes: CPU top: 5
1: cpu: 5.1% command: app-select started by: python pid: 15297 mem: 48.3 MiB (0.3%)
2: cpu: 1.7% command: xorg pid: 5798 mem: 56.3 MiB (0.3%)
3: cpu: 0.4% command: conky pid: 6110 mem: 10.1 MiB (0.0%)
4: cpu: 0.2% command: icewm pid: 6006 mem: 14.5 MiB (0.0%)
5: cpu: 0.1% command: slim pid: 5701 mem: 9.98 MiB (0.0%)
Memory top: 5
1: mem: 56.3 MiB (0.3%) command: xorg pid: 5798 cpu: 1.7%
2: mem: 48.3 MiB (0.3%) command: app-select started by: python pid: 15297 cpu: 5.1%
3: mem: 32.1 MiB (0.2%) command: rox pid: 6025 cpu: 0.1%
4: mem: 31.5 MiB (0.1%) command: yad pid: 15350 cpu: 0.0%
5: mem: 17.2 MiB (0.1%) command: volumeicon pid: 6042 cpu: 0.0%
Info: Processes: 178 Uptime: 28m Init: SysVinit v: 2.93 runlevel: 5 default: 5 Compilers:
gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.36

Here it is my full info of my laptop (AMD Athlon) with the AntiX installed on USB stick
—————————————————————————————

System: Host: ASUS Kernel: 4.9.240-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 8.3.0
parameters: BOOT_IMAGE=/boot/vmlinuz-4.9.240-antix.1-amd64-smp
root=UUID=3cafe92e-aadc-43da-b08c-f785f80ec609 ro gfxsave quiet
Desktop: IceWM 2.0.1 dm: SLiM 1.3.6
Distro: antiX-19.3_x64-full Manolis Glezos 15 October 2020
base: Debian GNU/Linux 10 (buster)
Machine: Type: Laptop System: ASUSTeK product: F3U v: 1.0 serial: <filter> Chassis: type: 10
serial: <filter>
Mobo: ASUSTeK model: F3U v: 1.0 serial: <filter> BIOS: American Megatrends v: 208
date: 07/18/2007
Battery: ID-1: BAT0 charge: 7.5 Wh condition: 7.5/51.3 Wh (15%) volts: 12.5/11.1
model: ASUSTEK F3—24 type: Li-ion serial: <filter> status: Full
Memory: RAM: total: 1.71 GiB used: 213.4 MiB (12.2%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots: Permissions: Unable to run dmidecode. Root privileges required.
CPU: Topology: Dual Core model: AMD Athlon 64 X2 TK-55 bits: 64 type: MCP arch: K8 rev.F+
family: F (15) model-id: 68 (104) stepping: 1 microcode: N/A L2 cache: 512 KiB
bogomips: 3191
Speed: 800 MHz min/max: 800/1800 MHz Core speeds (MHz): 1: 800 2: 800
Flags: 3dnow 3dnowext 3dnowprefetch apic clflush cmov cmp_legacy cr8_legacy cx16 cx8 de
extapic extd_apicid fpu fxsr fxsr_opt ht lahf_lm lbrv lm mca mce mmx mmxext msr mtrr
nopl nx pae pat pge pni pse pse36 rdtscp rep_good sep sse sse2 svm syscall tsc vme
vmmcall
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass status: Not affected
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD RS690M [Radeon Xpress 1200/1250/1270] vendor: ASUSTeK driver: radeon
v: kernel bus ID: 01:05.0 chip ID: 1002:791f
Display: x11 server: X.Org 1.20.4 driver: radeon resolution: 1280×800~60Hz
OpenGL: renderer: ATI RS690 v: 2.1 Mesa 18.3.6 direct render: Yes
Audio: Device-1: AMD SBx00 Azalia vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 00:14.2 chip ID: 1002:4383
Sound Server: ALSA v: k4.9.240-antix.1-amd64-smp
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK
driver: r8169 v: 2.3LK-NAPI port: b800 bus ID: 05:00.0 chip ID: 10ec:8168
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> type: dynamic mngtmpaddr scope: global
IP v6: <filter> scope: link
Device-2: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter driver: ath5k
v: kernel port: b800 bus ID: 06:00.0 chip ID: 168c:001c
IF: wlan0 state: down mac: <filter>
WAN IP: <filter>
Drives: Local Storage: total: 140.44 GiB used: 5.94 GiB (4.2%)
ID-1: /dev/sda vendor: Seagate model: ST9120822AS size: 111.79 GiB block size:
physical: 512 B logical: 512 B speed: 1.5 Gb/s serial: <filter> rev: C scheme: MBR
ID-2: /dev/sdb type: USB vendor: SanDisk model: USB 3.2Gen1 size: 28.65 GiB block size:
physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR
Optical-1: /dev/sr0 vendor: MATSHITA model: DVD-RAM UJ-850S rev: 1.22
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram
state: running
RAID: Message: No RAID data was found.
Partition: ID-1: / raw size: 24.41 GiB size: 24.03 GiB (98.43%) used: 5.94 GiB (24.7%) fs: ext2
dev: /dev/sdb2 label: rootantiX uuid: 3cafe92e-aadc-43da-b08c-f785f80ec609
ID-2: /media/an/DATAWIN raw size: 2.24 GiB size: 2.23 GiB (99.80%) used: 1.2 MiB (0.1%)
fs: vfat dev: /dev/sdb3 label: DATAWIN uuid: 0AE6-1BAB
ID-3: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 10 (default 60)
cache pressure: 50 (default 100) dev: /dev/sdb1 label: SWAP
uuid: 8e0bee22-319d-44fd-95ed-db7522af6734
Unmounted: ID-1: /dev/sda1 size: 6.84 GiB fs: vfat label: RECOVERY uuid: 1489-5F00
ID-2: /dev/sda2 size: 67.07 GiB fs: ntfs label: VistaOS uuid: A4448C70448C46D0
ID-3: /dev/sda3 size: 1 KiB fs: <root required> label: N/A uuid: N/A
ID-4: /dev/sda5 size: 37.88 GiB fs: ntfs label: DATA uuid: 7458901B588FDA6E
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Device-1: 1-1:2 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage
interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5591 serial: <filter>
Device-2: 1-7:4 info: Microdia PC Camera (SN9C201 + OV9650) type: <vendor specific>
driver: gspca_sn9c20x interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0c45:624f
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 2-2:2 info: Ortek Targus Number Keypad ports: 3 rev: 1.1 speed: 12 Mb/s
chip ID: 05a4:9837
Device-3: 2-2.2:3 info: Logitech Optical Tilt Wheel Mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c019
Device-4: 2-2.3:4 info: Ortek Targus Number Keypad (Composite Device)
type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 05a4:9862
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Sensors: System Temperatures: cpu: 41.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http: //it.mxrepo.com/antix/buster/ buster main nonfree nosystemd
No active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
1: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http: //ftp.be.debian.org/debian/ buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http: //ftp.be.debian.org/debian/ buster main contrib non-free
2: deb http: //security.debian.org/ buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/eid.list
1: deb http: //files.eid.belgium.be/debian/ buster main
2: deb http: //files2.eid.belgium.be/debian/ buster main
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] http: //dl.google.com/linux/chrome/deb/ stable main
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.list
Processes: CPU top: 5
1: cpu: 29.0% command: yad pid: 9295 mem: 28.5 MiB (1.6%)
2: cpu: 16.4% command: app-select started by: python3 pid: 9236 mem: 47.1 MiB (2.6%)
3: cpu: 2.8% command: xorg pid: 2587 mem: 66.3 MiB (3.7%)
4: cpu: 0.8% command: conky pid: 3034 mem: 11.2 MiB (0.6%)
5: cpu: 0.1% command: icewm pid: 2928 mem: 19.7 MiB (1.1%)
Memory top: 5
1: mem: 66.3 MiB (3.7%) command: xorg pid: 2587 cpu: 2.8%
2: mem: 48.8 MiB (2.7%) command: spacefm pid: 2941 cpu: 0.0%
3: mem: 47.1 MiB (2.6%) command: app-select started by: python3 pid: 9236 cpu: 16.4%
4: mem: 28.5 MiB (1.6%) command: yad pid: 9295 cpu: 29.0%
5: mem: 19.7 MiB (1.1%) command: icewm pid: 2928 cpu: 0.1%
Info: Processes: 162 Uptime: 47m Init: SysVinit v: 2.93 runlevel: 5 default: 5 Compilers:
gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.36

Best regards,
Wallon
from Belgium
Attachments:
1. Antix-english-US.jpg
2. Antix-french.jpg
January 15, 2021 at 8:17 pm #49930

In reply to: antiX-bullseye-a1-x64-bullseye-full available
Forum Admin
rokytnji
```
harry@antix1:~
$ su
Password: 
root@antix1:/home/harry# df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            3.9G     0  3.9G   0% /dev
tmpfs           792M  1.1M  791M   1% /run
/dev/sda2        51G  4.1G   45G   9% /
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           2.4G   34M  2.3G   2% /dev/shm
tmpfs           792M  4.0K  792M   1% /run/user/1000
root@antix1:/home/harry# inxi -vz8
Error 22: Unsupported option: -8
Check -h for correct parameters.
root@antix1:/home/harry# inxi -v8 -z
System:    Host: antix1 Kernel: 4.9.240-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 10.2.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.9.240-antix.1-amd64-smp root=UUID=3d4fd760-f2d2-45d4-9259-2f6b505d58e1 ro 
           gfxpayload=0x0317 quiet 
           Desktop: IceWM 2.0.1 dm: SLiM 1.3.6 Distro: antiX-bullseye-a1_x64-full Grup Yorum 3 January 2021 
           base: Debian GNU/Linux bullseye/sid 
Machine:   Type: Laptop System: Dell product: Latitude E4310 v: 0001 serial: <filter> Chassis: type: 9 serial: <filter> 
           Mobo: Dell model: 0T6M8G v: A01 serial: <filter> BIOS: Dell v: A03 date: 07/08/2010 
Battery:   ID-1: BAT0 charge: 48.8 Wh condition: 40.3/48.8 Wh (82%) volts: 12.4/11.1 model: Samsung SDI DELL RM6618A 
           type: Li-ion serial: N/A status: Full 
Memory:    RAM: total: 7.73 GiB used: 982.2 MiB (12.4%) 
           Array-1: capacity: 8 GiB slots: 2 EC: None max module size: 4 GiB note: est. 
           Device-1: DIMM_A size: 4 GiB speed: 1067 MT/s type: DDR3 detail: synchronous bus width: 64 bits total: 64 bits 
           manufacturer: 80AD part-no: HMT351S6BFR8C-H9 serial: <filter> 
           Device-2: DIMM_B size: 4 GiB speed: 1067 MT/s type: DDR3 detail: synchronous bus width: 64 bits total: 64 bits 
           manufacturer: 80AD part-no: HMT351S6CFR8C-H9 serial: <filter> 
PCI Slots: Slot: 0 type: x16 PCI Express x16 J5C1 status: Available length: Long 
           Slot: 1 type: x1 PCI Express J6C2 status: Available length: Short 
           Slot: 2 type: x1 PCI Express J6D2 status: In Use length: Short 
           Slot: 3 type: x1 PCI Express J7C1 status: In Use length: Short 
           Slot: 4 type: x1 PCI Express J7D2 status: Available length: Short 
CPU:       Topology: Dual Core model: Intel Core i5 M 520 bits: 64 type: MT MCP arch: Nehalem family: 6 model-id: 25 (37) 
           stepping: 5 microcode: 7 L1 cache: 32 KiB L2 cache: 3072 KiB L3 cache: 3000 KiB bogomips: 19153 
           Speed: 1199 MHz min/max: 1199/2400 MHz boost: enabled Core speeds (MHz): 1: 1199 2: 1199 3: 1466 4: 1199 
           Flags: acpi aes aperfmperf apic arat arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm 
           dts ept est flexpriority flush_l1d fpu fxsr ht ibpb ibrs ida kaiser lahf_lm lm mca mce mmx monitor msr mtrr 
           nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pebs pge pni popcnt pse pse36 rdtscp rep_good sep smx ss ssbd 
           sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr 
           Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel Core Processor Integrated Graphics vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 
           chip ID: 8086:0046 
           Display: x11 server: X.Org 1.20.10 driver: intel resolution: 1366x768~60Hz 
           OpenGL: renderer: Mesa DRI Intel HD Graphics (ILK) v: 2.1 Mesa 20.3.2 direct render: Yes 
Audio:     Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Dell driver: snd_hda_intel v: kernel 
           bus ID: 00:1b.0 chip ID: 8086:3b57 
           Sound Server: ALSA v: k4.9.240-antix.1-amd64-smp 
Network:   Device-1: Intel 82577LM Gigabit Network vendor: Dell driver: e1000e v: 3.2.6-k port: 6040 bus ID: 00:19.0 
           chip ID: 8086:10ea 
           IF: eth0 state: down mac: <filter> 
           Device-2: Intel Centrino Advanced-N 6200 driver: iwlwifi v: kernel port: 6000 bus ID: 02:00.0 chip ID: 8086:422c 
           IF: wlan0 state: up mac: <filter> 
           IP v4: <filter> scope: global broadcast: <filter> 
           IP v6: <filter> scope: link 
           WAN IP: <filter> 
Drives:    Local Storage: total: 55.90 GiB used: 4.08 GiB (7.3%) 
           ID-1: /dev/sda vendor: Kingston model: SV300S37A60G size: 55.90 GiB block size: physical: 512 B logical: 512 B 
           speed: 3.0 Gb/s serial: <filter> rev: BBF0 scheme: MBR 
           Optical-1: /dev/sr0 vendor: TSSTcorp model: DVD+-RW TS-U633F rev: D500 dev-links: cdrom,cdrw,dvd,dvdrw 
           Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 51.99 GiB size: 50.93 GiB (97.95%) used: 4.08 GiB (8.0%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootantiX19 uuid: 3d4fd760-f2d2-45d4-9259-2f6b505d58e1 
           ID-2: swap-1 size: 3.91 GiB used: 0 KiB (0.0%) fs: swap swappiness: 10 (default 60) 
           cache pressure: 50 (default 100) dev: /dev/sda1 label: N/A uuid: c2c2e3c2-d035-4c5c-85de-c33c3f1e4425 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip ID: 8087:0020 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 8087:0020 
           Device-1: 2-1.8:3 info: Broadcom BCM5880 Secure Applications Processor with fingerprint swipe sensor 
           type: Smart Card driver: N/A interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 0a5c:5801 serial: <filter> 
Sensors:   System Temperatures: cpu: 54.0 C mobo: N/A sodimm: 43.0 C 
           Fan Speeds (RPM): cpu: 0 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://mirrors.rit.edu/mxlinux/mx-packages/antix/testing testing main nosystemd nonfree
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://ftp.us.debian.org/debian/ bullseye main contrib non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 
           1: cpu: 19.8% command: firefox-esr pid: 29682 mem: 227.7 MiB (2.8%) 
           2: cpu: 14.4% command: firefox-esr pid: 29520 mem: 431.2 MiB (5.4%) 
           3: cpu: 2.9% command: firefox-esr pid: 29591 mem: 280.3 MiB (3.5%) 
           4: cpu: 1.3% command: xorg pid: 2411 mem: 44.5 MiB (0.5%) 
           5: cpu: 0.6% command: firefox-esr pid: 29769 mem: 149.0 MiB (1.8%) 
           Memory top: 5 
           1: mem: 431.2 MiB (5.4%) command: firefox-esr pid: 29520 cpu: 14.4% 
           2: mem: 280.3 MiB (3.5%) command: firefox-esr pid: 29591 cpu: 2.9% 
           3: mem: 227.7 MiB (2.8%) command: firefox-esr pid: 29682 cpu: 19.8% 
           4: mem: 149.0 MiB (1.8%) command: firefox-esr pid: 29769 cpu: 0.6% 
           5: mem: 68.9 MiB (0.8%) command: firefox-esr pid: 31621 cpu: 0.0% 
Info:      Processes: 180 Uptime: 1h 23m Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 
           Shell: bash (su) v: 5.1.4 running in: roxterm inxi: 3.0.36 
root@antix1:/home/harry# 
```
All hardware working. dist-upgrade done. Sure was a bunch. Just dialing things in till I locate a bluetooth dongle to test.

Sometimes I drive a crooked road to get my mind straight.
Not all who Wander are Lost.
I'm not outa place. I'm from outer space.

Linux Registered User # 475019
How to Search for AntiX solutions to your problems
January 14, 2021 at 8:08 pm #49852

In reply to: Paketverwaltung (Kommandozeile und GUI)
Member
Xecure
caprea wrote:

Xecure, I think there is might a communication problem, because of the language.

It not only is possible but it probably is as you say. I think I understand now after re-reading all posts. Because something happened to the antix.list, the system updated all debian packages but not antiX packages. In cli-aptiX I got the same error as ext4 when simulating the issue:
```
Paketlisten werden gelesen... Fertig
E: Das Depot »http://mirror.plusserver.com/mxlinux/mxlinux/antix buster Release« enthält keine Release-Datei.
N: Eine Aktualisierung von solch einem Depot kann nicht auf eine sichere Art durchgeführt werden, daher ist es standardmäßig deaktiviert.
N: Weitere Details zur Erzeugung von Paketdepots sowie zu deren Benutzerkonfiguration finden Sie in der Handbuchseite apt-secure(8).
```
After installing some updates and missing some packages, Synaptic had problems (but I cannot reproduce the first synaptic error), but after ext4 restored the sources using repo manager, synaptic spits out the error related to a problematic antix mirror, which I reproduced on my system:
Das Depot »http://mirror.plusserver.com/mxlinux/mxlinux/antix buster Release« enthält keine Release-Datei.
After Robin asking for the content inside sources.list.d, you discovered that the antiX sources are missing the /buster/ entry and instead appear as “deb mirror.repo/antix// buster” instead of “deb mirror.repo/antix/buster/ buster”. Following your indications, the user replaces the content with yours, and the problem is momentarily solved.

I think the later error appeared again and made it impossible to reinstall the repo-manager because the antix.list file was broken again. I blame myself for not explaining clearly to restore the antix.list file following your indications before trying to reinstall repo-manager, and that lead to ext4 wasting so much time because I didn’t correctly explain this.

ext4 wrote:

P.S. Die Anweisungen von xecure habe ich ausgeführt. Scheint soweit zu laufen (Kommandozeile). Am Besten sollte ich vorerst die Synaptic (GUI) wieder deinstallieren, damit mir keine weiteren Fehler unterlaufen.

Fortunately, now the antix repo works again. I don’t think synaptic is to blame, but some strange configuration in the repo-manager or one of its dependencies. Now that it is restored, you can now reinstall repo-manager and can still keep synaptic (no need to uninstall it). Synaptic is more user-friedly than the terminal for searching and installing new programs. Don’t touch the repositories from synaptic and, if needed, only use the repo-manager to change the repository (though now you already have the fastest mirrors set up, so no need to touch them for now).

Let us know if we can help with anything else.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.
January 14, 2021 at 6:56 pm #49847

In reply to: Paketverwaltung (Kommandozeile und GUI)
Member
Xecure
Don’t reinstall just yet. rewrite the antix.list file as caprea indicated:
gksudo leafpad /etc/apt/sources.list.d/antix.list

And replace the whole file’s content with:
```
# Use with Debian Stable/buster repositories. Set as default for antiX-19.
deb http://mirror.plusserver.com/mxlinux/mxlinux/antix/buster/ buster main nonfree nosystemd 
#deb-src http://mirror.plusserver.com/mxlinux/mxlinux/antix/buster/ buster main nonfree nosystemd  

# Use with Debian Testing/'rolling' repositories.
#deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/testing testing main nonfree nosystemd 
#deb-src http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/testing testing main nonfree nosystemd 

# Use with Debian Sid repositories. 
#deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/sid sid main nonfree nosystemd 
#deb-src http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/sid sid main nonfree nosystemd 
```
Save and close the file. This will solve all the repo issues with the antiX mirror.

I think there was a small error with the repo manager, but you should be able to reinstall it with the command
sudo apt update && sudo apt install repo-manager
after changing the antix.list file.
You shouldn’t have any more problems after this. I consider this a one-time error, as this doesn’t happen at all since almost 2 years ago.

But if you see that this is too much, and prefer to go back to windows, it is understandable.

Anyway, we will try to help as best we can if you have any other questions.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.
January 14, 2021 at 10:48 am #49808

In reply to: Paketverwaltung (Kommandozeile und GUI)
Member
Xecure
You are right. The error was in the links in the antix.list. This happend a long time ago during antiX 19 beta testing, and I hadn’t seen this error again.
Replace the file contents in /etc/apt/sources.list.d/antix.list as caprea mentioned, then update your system
sudo apt update && sudo apt upgrade
answer yes to all questions during the upgrade process and this error should not pop up again.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.
January 14, 2021 at 8:58 am #49803

In reply to: Paketverwaltung (Kommandozeile und GUI)
Member
ext4
Hi,

hier der Screenshot von der “antix.list” (Screenshot 9).

Was mich wundert ist der “Doppel-Slash” hinter antix, mx-lunix und so weiter. Das ist bei vielen Einträgen der Fall.

z. B. https://mirror.eu.oneandone.net/linux/distributions/mx/packages/antix//

Wenn ich das richtig interpretiere, sollte der Link folgendermaßen aussehen:

https://mirror.eu.oneandone.net/linux/distributions/mx/packages/antix/buster/

Wie und vorallem wo kann ich diese unterschiedlichen Links korrigieren, dass sie dauerhaft erhalten bleiben?

Die “antix.list” habe ich nun angepasst.

Grüße
Frank
- This reply was modified 2 years, 3 months ago by ext4.
Attachments:
1. screenshot9.jpg
Es kann nur e1nen geben!
January 14, 2021 at 12:11 am #49796

In reply to: Paketverwaltung (Kommandozeile und GUI)
Moderator
caprea
Was sagt denn die Ausgabe von

sudo dpkg --configure -a

im Terminal, so wie es dir die Synaptik vorgeschagen hat ?

Sehe grade dass deine antix.list schon mal sehr merkwürdig aussieht. Hast du die manuell geändert?

Mach mal folgendes

sudo leafpad /etc/apt/sources.list.d/antix.list

Das öffnet die Datei antix.list , lösche nun alles was da steht und trage das hier ein
```
# Use with Debian Stable/buster repositories. Set as default for antiX-19.
deb https://mirror.eu.oneandone.net/linux/distributions/mx/packages/antix/buster/ buster main nonfree nosystemd  
#deb-src https://mirror.eu.oneandone.net/linux/distributions/mx/packages/antix/buster/ buster main nonfree nosystemd  

# Use with Debian Testing/'rolling' repositories.
#deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/testing testing main nonfree nosystemd 
#deb-src http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/testing testing main nonfree nosystemd 

# Use with Debian Sid repositories. 
#deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/sid sid main nonfree nosystemd 
#deb-src http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/sid sid main nonfree nosystemd 
```
Schließen und speichern.
Dann sollte die schon mal wieder funktionieren.
January 8, 2021 at 3:21 pm #49373

In reply to: apt update fails – repo not signed [solved]
Member
olsztyn
anticapitalista wrote:

Here is the problem
Active apt repos in: /etc/apt/sources.list
1: deb http://la.mxrepo.com/antix/buster/dists/buster/ buster main
Remove that entry.

Thank you anti…
This entry was freshly added when I was testing. Following your above advice I started fresh, without this entry and attempted to add the repository from your post, namely the same as before http://ftp.debian.org/debian/dists/Debian10.7/.
This resulted in exactly the same rejection error by Synaptic:
”
The repository ‘http://ftp.debian.org/debian/dists/Debian10.7 buster Release’ does not have a Release file.
”
Fresh:
$ inxi -r
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://la.mxrepo.com/antix/buster/ buster main nonfree nosystemd
Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
1: deb http://deb.debian.org/debian/ buster-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.us.debian.org/debian/ buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.us.debian.org/debian/ buster main contrib non-free
2: deb http://security.debian.org/ buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/megasync.list
1: deb https://mega.nz/linux/MEGAsync/Debian_10.0/ ./
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.list
demo@antix1:~

This is a quite intriguing issue for me to investigate but I do not want to waste more of your precious time for me. So if this error does not happen for other users it remains for me to dig into this, especially got an excellent description of repo validity check mechanism from Xecure.

Thanks again and best Regards…

Live antiX Boot Options (Previously posted by Xecure):
https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_Parameters
January 8, 2021 at 2:56 pm #49372

In reply to: apt update fails – repo not signed [solved]
Member
olsztyn
Xecure wrote:

When apt check a repository, i compares the signature from the repo and the one saved in your system, to see if they match and to check if it has reached its “expiration date”.
The error seen by the thread OP is related to the GPG key not matching, not being found or for it reaching the expiration date.
For antix linux case, all PGP signatures in your system come from the package antix-archive-keyring (if I am not mistaken). This package adds the corresponding PGP key to /etc/apt/trusted.gpg.d/ for APT signing verification.
You add a source to /etc/apt/sources.list.d/ (for example, antix.list). When apt does a packagelist update (sudo apt update)
It reads the different sources, sends a request to access Release and Release.gpg files, checks if the Release.gpg file matches the PGP key in your system and “confirms” the signature, and then adds the information of Release to the list of available packages to be downloaded. This is how it verifies that the repo is secure and OK.

@ Xecure:
I just want to thank you for this clear explanation of the mechanism in repo validity check. I missed to thank you for this the first time around…
There is something to learn for me each day…
Greatly appreciate.

Live antiX Boot Options (Previously posted by Xecure):
https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_Parameters
Author

Search Results

Viewing 15 results - 256 through 270 (of 567 total)

← 1 … 17 18 19 … 38 →

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

In reply to: Does antiX run on newer AMD type computers.

Topic: No NVIDIA driver for 900 series ?

Topic: No NVIDIA driver for series 900 ?

In reply to: second monitor, no image

In reply to: PFO Back with older HP Laptop

Topic: Timeshift doesn’t work with Antix ?

Topic: Window “add-desktop” – not the same options in English versus French – Bug ?

Attachments:

In reply to: antiX-bullseye-a1-x64-bullseye-full available

In reply to: Paketverwaltung (Kommandozeile und GUI)

In reply to: Paketverwaltung (Kommandozeile und GUI)

In reply to: Paketverwaltung (Kommandozeile und GUI)

In reply to: Paketverwaltung (Kommandozeile und GUI)

Attachments:

In reply to: Paketverwaltung (Kommandozeile und GUI)

In reply to: apt update fails – repo not signed [solved]

In reply to: apt update fails – repo not signed [solved]