Page 5 – antiX-forum

Viewing 15 results - 61 through 75 (of 567 total)

Author

Search Results

October 27, 2022 at 10:54 am #91617

In reply to: testing 5.10 kernel

Member

Robin

Just for comparison, I’ve installed latest debian default kernel on antiX 21, since I’ve read while searching for a solution for this nouveau issue in 5.10 kernel from above, that these issues should vanish in 5.15 kernel magically. In the repos doesn’t seem to exist any 5.15 kernel, so I installed latest available default debian kernel from the backport repos:

linux-image-5.19.0-0.deb11.2-686-pae:
  Installiert:           5.19.11-1~bpo11+1
  Installationskandidat: 5.19.11-1~bpo11+1
  Versionstabelle:
 *** 5.19.11-1~bpo11+1 100
        100 http://deb.debian.org/debian bullseye-backports/main i386 Packages
        100 /var/lib/dpkg/status

And what should I say, actually the issue from the 5.10 kernel is fixed, it boots antiX straight up to desktop. It even uses nouveau driver on a speed and clean view I’ve never seen from nouveau ever before here. This comes very near already to the proprietary nvidia drivers. Will need to get some further stress testing, but it looks promising, really. For now it seems to run absolutely stable. Maybe I can get rid of the proprietary nvidia stuff in near future and switch to 5.x kernel series for everyday work… I’m writing these lines from this very system right now. It’s amazing! Here the details:

(inxi -zv8)

System:    Kernel: 5.19.0-0.deb11.2-686-pae i686 bits: 32 compiler: gcc v: 10.2.1 
           parameters: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all 
           Desktop: IceWM 2.9.4 dm: N/A Distro: antiX-21_386-full Grup Yorum 31 October 2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: N/A Chassis: No Enclosure type: 1 
           serial: N/A 
           Mobo: Notebook model: RIM2000 serial: N/A BIOS: Phoenix v: RIM00F0A date: 05/27/2005 
Battery:   ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) volts: 16.6 min: 14.8 
           model: ARIMA LI4403A type: Unknown serial: <filter> status: Full 
Memory:    RAM: total: 1.96 GiB used: 368.5 MiB (18.3%) 
           Array-1: capacity: 3 GiB note: check slots: 2 EC: None max-module-size: 1024 MiB note: est. 
           voltage: 3.3 
           Device-1: M1 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous 
           bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
           Device-2: M2 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous 
           bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
PCI Slots: Message: No PCI Slot data found. 
CPU:       Info: Single Core model: Intel Pentium M socket: U1 bits: 32 type: MCP arch: M Dothan family: 6 
           model-id: D (13) stepping: 8 microcode: 20 cache: L1: 32 KiB L2: 2 MiB bogomips: 3457 
           Speed: 800 MHz min/max: 800/1733 MHz base/boost: 1733/500 volts: 3.3 V Core speed (MHz): 1: 800 
           Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae pbe pge pse 
           pti sep ss sse sse2 tm tm2 tsc vme 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: mmio_stale_data status: Unknown: No mitigations 
           Type: retbleed status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: nouveau v: kernel bus-ID: 01:00.0 
           chip-ID: 10de:0148 class-ID: 0300 
           Display: server: X.Org 1.20.11 driver: loaded: nouveau unloaded: fbdev,modesetting,vesa alternate: nv 
           display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 380x238mm (15.0x9.4") s-diag: 448mm (17.7") 
           Monitor-1: LVDS-1 res: 1440x900 hz: 60 dpi: 100 size: 367x230mm (14.4x9.1") diag: 433mm (17.1") 
           OpenGL: renderer: NV43 v: 2.1 Mesa 20.3.5 direct render: Yes 
Audio:     Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks driver: snd_hda_intel 
           v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403 
           Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation driver: saa7134 
           v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480 
           Sound Server-1: ALSA v: k5.19.0-0.deb11.2-686-pae running: yes 
Network:   Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 port: 2000 
           bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200 
           IF: eth0 state: down mac: <filter> 
           Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq port: 2000 
           bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280 
           IF: eth1 state: up mac: <filter> 
           IP v4: <filter> scope: global broadcast: <filter> 
           IP v6: <filter> scope: link 
           WAN IP: <filter> 
Bluetooth: Message: No bluetooth data found. 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 151.75 GiB used: 91.46 GiB (60.3%) 
           ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A family: Momentus 5400.2 size: 93.16 GiB 
           block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 3.02 
           temp: 51 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 7y 259d 4h cycles: 9857 
           ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk size: 58.59 GiB block-size: 
           physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 8.01 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B dev-links: cdrom,cdrw,dvd,dvdrw 
           Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running 
Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) used: 19.68 GiB (34.2%) fs: ext4 
           block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb 
           uuid: 862f493d-6951-444f-a3f6-734244b241e7 
           ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 5.4 MiB (11.1%) fs: vfat 
           block-size: 512 B dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 
           ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) used: 34.65 GiB (83.2%) fs: ext3 
           block-size: 4096 B dev: /dev/sda7 maj-min: 8:7 label: /daten3 
           uuid: c1bc867a-ec28-436d-831b-e47f334471ce 
           ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) fs: ext3 
           block-size: 4096 B dev: /dev/sda8 maj-min: 8:8 label: /daten4 
           uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da 
           ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) fs: ext3 
           block-size: 4096 B dev: /dev/sda5 maj-min: 8:5 label: /home uuid: 94021be3-c160-4166-a151-92ad72b26f9a 
           ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 7.95 GiB (81.6%) fs: ext4 
           block-size: 4096 B dev: /dev/sda6 maj-min: 8:6 label: antiX uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec 
           ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 4.3 GiB (55.2%) fs: ext4 
           block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal 
           uuid: 19eaea0e-493b-4007-8eff-f14aca40363f 
           ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) fs: ext4 
           block-size: 4096 B dev: /dev/sda10 maj-min: 8:10 label: N/A uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d 
Swap:      Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) 
           ID-1: swap-1 type: partition size: 2.16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda9 maj-min: 8:9 
           label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 
Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 
           class-ID: 0900 
           Device-1: 1-1:2 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 093a:2533 class-ID: 0300 
           Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 
           class-ID: 0900 
           Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 
           class-ID: 0900 
           Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 
           class-ID: 0900 
           Device-1: 4-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 serial: <filter> 
Sensors:   System Temperatures: cpu: 66.4 C mobo: 56.0 C 
           Fan Speeds (RPM): N/A 
Repos:     Packages: apt: 1824 lib: 879 
           Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye main nosystemd nonfree
           Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 
           1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://ftp.de.debian.org/debian/ bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://ftp.de.debian.org/debian/ bullseye main contrib non-free
           2: deb http://security.debian.org/ bullseye-security main contrib non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 of 124 
           1: cpu: 7.0% command: sudo pid: 6517 mem: 4.56 MiB (0.2%) 
           2: cpu: 4.0% command: zzzfm pid: 5928 mem: 34.3 MiB (1.7%) 
           3: cpu: 3.1% command: xorg pid: 3998 mem: 50.7 MiB (2.5%) 
           4: cpu: 1.2% command: gtkdialog pid: 6233 mem: 24.2 MiB (1.2%) 
           5: cpu: 0.8% command: conky pid: 4420 mem: 8.95 MiB (0.4%) 
           Memory top: 5 of 124 
           1: mem: 50.7 MiB (2.5%) command: xorg pid: 3998 cpu: 3.1% 
           2: mem: 34.3 MiB (1.7%) command: zzzfm pid: 5928 cpu: 4.0% 
           3: mem: 31.6 MiB (1.5%) command: cmst pid: 4403 cpu: 0.0% 
           4: mem: 28.1 MiB (1.3%) command: roxterm pid: 4844 cpu: 0.8% 
           5: mem: 24.2 MiB (1.2%) command: gtkdialog pid: 6233 cpu: 1.2% 
Info:      Processes: 124 Uptime: 11m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service 
           Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: roxterm inxi: 3.3.06

(initrd.log)

Run custom code before reading boot codes: /live/custom/antiX/0.sh
Translate to de
Schrift aufLat15-VGA16 setzen
setfont /live/locale/fonts/Lat15-VGA16.psf -C /dev/console
Neue Bildschirmbreite 80
=== initrd bootstrap ==================================================
initrd init started at 0.36 seconds
Coldplug loop pid: 131
Willkommen bei antiX 21 (Grup Yorum) 32-bit pae!
  BusyBox v1.31.1 (2021-02-03 15:54:12 MST) multi-call binary.
  ntfs-3g 2017.3.23AR.3 integrated FUSE 28
           initrd version: 8.30.14-x08
             initrd built: Fri, 04 Jun 2021 11:43:21 +0000
             Total Memory:  2010 M
              Used Memory:    60 M
             Linux kernel: 5.19.0-0.deb11.2-686-pae
             Screen width: 80
              Kernel arch: i686
                 Hardware: Notebook RIM2000
Augenblickliche Bootparameter:
     lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all
overlay gefunden
Lade Hardware spezifische Module ...
Prüfe usb,cd Geräte. Suche nach boot Datei(en) antiX/linuxfs
Herausgefilterte Geräte  /dev/sr0
Versuch wiederholen für 15 Sekunden ...
Neue(s) Gerät(e) /dev/sdb2 /dev/sdb1 /dev/sdb /dev/sr0 gefunden
mount -t vfat -o umask=000,dmask=002,fmask=113,shortname=winnt,uid=1000,gid=1000 /dev/sdb2 /live/boot-dev
mount -t ext4 -o ro,noatime /dev/sdb1 /live/boot-dev
Eingehängtes boot Gerät. Gerät /dev/sdb1 eingehängt auf /live/boot-dev
boot Gerät Dateisystem: ext4
boot device model: Flash Disk
Spent 2.81 seconds looking for boot file(s) antiX/linuxfs
loop times: 0.37 0.44 0.40
boot device uuid: 862f493d-6951-444f-a3f6-734244b241e7
BOOT_MP:    /live/boot-dev
SQFILE_DEV: /dev/sdb1
SQFILE_MP   /live/boot-dev
Starte Generator für Zufallsnummern...
Speichere zufälligen seed
Mount file /live/boot-dev/antiX/linuxfs at /live/linux
mount -t squashfs -o loop,ro /live/boot-dev/antiX/linuxfs /live/linux
sqfs_vid: ==== 8f7f5d0737879da9f09b8c3ad7b69283
LD_PATH: /live/linux/lib:/live/linux/lib/i386-linux-gnu:/live/linux/usr/lib
Loaded 50 module(s)
squashfs loop ext4 jbd2 mbcache crc16 nls_ascii vfat fat nls_cp437 uas usb_storage hid_generic usbhid hid sr_mod cdrom sd_mod t10_pi crct10dif_generic crc_t10dif crct10dif_common crc64_rocksoft crc64 ehci_pci uhci_hcd ata_generic ahci libahci ata_piix libata scsi_mod scsi_common sdhci_pci sdhci cqhci firewire_ohci firewire_core crc_itu_t dm_crypt dm_mod dax mmc_block mmc_core crc32c_generic overlay battery ehci_hcd usbcore usb_common
precheck filesystem on /dev/sdb1
Erstellen aufs ram tmpfs bei /live/aufs-ram       (1560 MB)
/bin/mount -t tmpfs -o size=1560m,noatime tmpfs /live/aufs-ram
Mount overlayfs at /live/aufs
mount -t overlay overlay -o lowerdir=/live/linux,upperdir=/live/aufs-ram/upper,workdir=/live/aufs-ram/work /live/aufs
Found one video display device
kill coldplug loop pid: 131
Erstellen   /media tmpfs bei /live/aufs/media     (10 MB)
/bin/mount -t tmpfs -o size=10m,noatime tmpfs /live/aufs/media
Erstellen     /run tmpfs bei /live/aufs/run       (1111 MB)
/bin/mount -t tmpfs -o size=1111m,mode=755,nodev,noatime tmpfs /live/aufs/run
Erstellen    /live tmpfs bei /live/aufs/live      (100 MB)
/bin/mount -t tmpfs -o size=100m,mode=755,noatime tmpfs /live/aufs/live
Run custom code before: /live/custom/antiX/0.sh
mount --move /live/aufs-ram /live/aufs/live/aufs-ram
mount --move /live/boot-dev /live/aufs/live/boot-dev
mount --move /live/linux /live/aufs/live/linux
Run custom code after: /live/custom/antiX/0.sh
Coldplug loop pid: 1198
Run custom code before running live init.d scripts: /live/custom/antiX/8.sh
kill coldplug loop pid: 1198

Das initrd init Programm brauchte 23.30 Sekunden
======================================================================

(live-init.log)

Thu Oct 27 10:44:53 CEST 2022  /live/etc/init.d/live-usb-save
live-usb-save: Restore state information
  Restore machine specific state file /etc/udev/rules.d/70-persistent-net.rules
  Restore machine specific state file /var/lib/connman/wifi_0012f006fa18_574b3233_managed_psk/settings
  Restore general state file /etc/fstab.mount
  Restore general state file /var/log/live/persist-save.log

Thu Oct 27 10:44:53 CEST 2022  /live/etc/init.d/live-L10n
live-L10n: Lokalisierung der Konsole und Zeitzone
  Einstellung der Zeitzone und der Ortszeit auf Europe/Berlin
  Einstellung des Gebietsschema auf de_DE.UTF-8

Thu Oct 27 10:44:54 CEST 2022  /live/etc/init.d/live-init
live-init: Lokalisierung/Konfiguration X-Window
  Alle Geräte werden gemountet
  make-fstab: Remove all dynamic entries from /etc/fstab
  make-fstab: Create new /etc/fstab
  make-fstab: Automount /dev/sda1 at /media/antiX-Frugal
  make-fstab: Automount /dev/sda5 at /media/_home
  make-fstab: Automount /dev/sda6 at /media/antiX
  make-fstab: Automount /dev/sda7 at /media/_daten3
  make-fstab: Automount /dev/sda8 at /media/_daten4
  make-fstab: Automount /dev/sda10 at /media/sda10
  make-fstab: Automount /dev/sdb2 at /media/ANTIX-UEFI
  make-fstab: Put 9 hard drive entries into /etc/fstab
  make-fstab: Put 1 removable entry into /etc/fstab
  Repository-Lokalisierung auf Europe/Berlin
  Menü-Lokalisierung auf /live/etc/init.d/live-init in /etc/skel
  Einstellung xkb-layout auf de,us
  Einstellung xkb-model auf pc105
  Einstellung xkb-variant auf 
  Einstellung xkb-options auf grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll
  CONSOLE KEYMAP: /etc/default/keyboard
  Nach Hardware-spezifischen Video-Module wird gescannt...
  KMS Video-Modul(e) gefunden drm_display_helper drm_ttm_helper nouveau
  Standardbenutzer demo gefunden

Thu Oct 27 10:45:03 CEST 2022  /live/etc/init.d/live-disable-services
live-disable-services: Customizing services
  Disabling some services (L, lean)
  Disabling more services (X, Xtralean)

(Xorg.0.log)

[    52.484] 
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[    52.484] Build Operating System: linux Debian
[    52.484] Current Operating System: Linux antix1 5.19.0-0.deb11.2-686-pae #1 SMP PREEMPT_DYNAMIC Debian 5.19.11-1~bpo11+1 (2022-10-03) i686
[    52.484] Kernel command line: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all
[    52.484] Build Date: 10 November 2021  11:00:13AM
[    52.484] xorg-server 2:1.20.11-1.0nosystemd1 (https://www.debian.org/support) 
[    52.484] Current version of pixman: 0.40.0
[    52.484] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    52.484] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    52.484] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 10:45:35 2022
[    52.498] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    52.498] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    52.506] (==) No Layout section.  Using the first Screen section.
[    52.506] (==) No screen section available. Using defaults.
[    52.506] (**) |-->Screen "Default Screen Section" (0)
[    52.506] (**) |   |-->Monitor "<default monitor>"
[    52.507] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    52.507] (==) Automatically adding devices
[    52.507] (==) Automatically enabling devices
[    52.507] (==) Automatically adding GPU devices
[    52.507] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    52.529] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    52.529] 	Entry deleted from font path.
[    52.531] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    52.531] 	Entry deleted from font path.
[    52.531] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    52.531] 	Entry deleted from font path.
[    52.531] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	built-ins
[    52.531] (==) ModulePath set to "/usr/lib/xorg/modules"
[    52.532] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    52.532] (II) Loader magic: 0x731700
[    52.532] (II) Module ABI versions:
[    52.532] 	X.Org ANSI C Emulation: 0.4
[    52.532] 	X.Org Video Driver: 24.1
[    52.532] 	X.Org XInput driver : 24.1
[    52.532] 	X.Org Server Extension : 10.0
[    52.532] (II) xfree86: Adding drm device (/dev/dri/card0)
[    52.561] (--) PCI:*(1@0:0:0) 10de:0148:161f:203d rev 162, Mem @ 0xa0000000/67108864, 0xc0000000/134217728, 0x90000000/16777216, BIOS @ 0x????????/131072
[    52.561] (II) LoadModule: "glx"
[    52.572] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    52.676] (II) Module glx: vendor="X.Org Foundation"
[    52.676] 	compiled for 1.20.11, module version = 1.0.0
[    52.676] 	ABI class: X.Org Server Extension, version 10.0
[    52.937] (==) Matched nouveau as autoconfigured driver 0
[    52.937] (==) Matched nv as autoconfigured driver 1
[    52.937] (==) Matched modesetting as autoconfigured driver 2
[    52.937] (==) Matched fbdev as autoconfigured driver 3
[    52.937] (==) Matched vesa as autoconfigured driver 4
[    52.937] (==) Assigned the driver to the xf86ConfigLayout
[    52.937] (II) LoadModule: "nouveau"
[    52.938] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    52.979] (II) Module nouveau: vendor="X.Org Foundation"
[    52.979] 	compiled for 1.20.10, module version = 1.0.17
[    52.979] 	Module class: X.Org Video Driver
[    52.979] 	ABI class: X.Org Video Driver, version 24.1
[    52.979] (II) LoadModule: "nv"
[    52.981] (WW) Warning, couldn't open module nv
[    52.981] (EE) Failed to load module "nv" (module does not exist, 0)
[    52.981] (II) LoadModule: "modesetting"
[    52.981] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    52.995] (II) Module modesetting: vendor="X.Org Foundation"
[    52.996] 	compiled for 1.20.11, module version = 1.20.11
[    52.996] 	Module class: X.Org Video Driver
[    52.996] 	ABI class: X.Org Video Driver, version 24.1
[    52.996] (II) LoadModule: "fbdev"
[    52.997] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    53.011] (II) Module fbdev: vendor="X.Org Foundation"
[    53.011] 	compiled for 1.20.0, module version = 0.5.0
[    53.011] 	Module class: X.Org Video Driver
[    53.011] 	ABI class: X.Org Video Driver, version 24.0
[    53.011] (II) LoadModule: "vesa"
[    53.011] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    53.019] (II) Module vesa: vendor="X.Org Foundation"
[    53.019] 	compiled for 1.20.9, module version = 2.5.0
[    53.019] 	Module class: X.Org Video Driver
[    53.019] 	ABI class: X.Org Video Driver, version 24.1
[    53.019] (II) NOUVEAU driver Date:   Sat Jan 23 12:24:42 2021 -0500
[    53.019] (II) NOUVEAU driver for NVIDIA chipset families :
[    53.019] 	RIVA TNT            (NV04)
[    53.019] 	RIVA TNT2           (NV05)
[    53.019] 	GeForce 256         (NV10)
[    53.020] 	GeForce 2           (NV11, NV15)
[    53.020] 	GeForce 4MX         (NV17, NV18)
[    53.020] 	GeForce 3           (NV20)
[    53.020] 	GeForce 4Ti         (NV25, NV28)
[    53.020] 	GeForce FX          (NV3x)
[    53.020] 	GeForce 6           (NV4x)
[    53.020] 	GeForce 7           (G7x)
[    53.020] 	GeForce 8           (G8x)
[    53.020] 	GeForce 9           (G9x)
[    53.020] 	GeForce GTX 2xx/3xx (GT2xx)
[    53.020] 	GeForce GTX 4xx/5xx (GFxxx)
[    53.020] 	GeForce GTX 6xx/7xx (GKxxx)
[    53.020] 	GeForce GTX 9xx     (GMxxx)
[    53.021] 	GeForce GTX 10xx    (GPxxx)
[    53.021] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    53.021] (II) FBDEV: driver for framebuffer: fbdev
[    53.021] (II) VESA: driver for VESA chipsets: vesa
[    53.021] (++) using VT number 7

[    53.029] (II) [drm] nouveau interface version: 1.3.1
[    53.029] (WW) Falling back to old probe method for modesetting
[    53.029] (WW) Falling back to old probe method for fbdev
[    53.029] (II) Loading sub module "fbdevhw"
[    53.030] (II) LoadModule: "fbdevhw"
[    53.030] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    53.045] (II) Module fbdevhw: vendor="X.Org Foundation"
[    53.045] 	compiled for 1.20.11, module version = 0.0.2
[    53.045] 	ABI class: X.Org Video Driver, version 24.1
[    53.045] (II) Loading sub module "dri2"
[    53.045] (II) LoadModule: "dri2"
[    53.045] (II) Module "dri2" already built-in
[    53.045] (--) NOUVEAU(0): Chipset: "NVIDIA NV43"
[    53.045] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    53.045] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    53.045] (==) NOUVEAU(0): RGB weight 888
[    53.045] (==) NOUVEAU(0): Default visual is TrueColor
[    53.045] (==) NOUVEAU(0): Using HW cursor
[    53.045] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[    53.045] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    53.045] (==) NOUVEAU(0): Page flipping enabled
[    53.045] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[    53.045] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[    53.045] (II) NOUVEAU(0): Initializing outputs ...
[    53.083] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    53.173] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[    53.239] (II) NOUVEAU(0): Output TV-1 has no monitor section
[    53.239] (II) NOUVEAU(0): 3 crtcs needed for screen.
[    53.239] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    53.239] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    53.283] (II) NOUVEAU(0): EDID for output VGA-1
[    53.344] (II) NOUVEAU(0): EDID for output LVDS-1
[    53.344] (II) NOUVEAU(0): Manufacturer: SEC  Model: 3847  Serial#: 0
[    53.344] (II) NOUVEAU(0): Year: 2006  Week: 0
[    53.344] (II) NOUVEAU(0): EDID Version: 1.3
[    53.344] (II) NOUVEAU(0): Digital Display Input
[    53.344] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37  vert.: 23
[    53.344] (II) NOUVEAU(0): Gamma: 2.20
[    53.344] (II) NOUVEAU(0): No DPMS capabilities specified
[    53.344] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    53.344] (II) NOUVEAU(0): First detailed timing is preferred mode
[    53.344] (II) NOUVEAU(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    53.344] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    53.344] (II) NOUVEAU(0): Manufacturer's mask: 0
[    53.344] (II) NOUVEAU(0): Supported detailed timing:
[    53.344] (II) NOUVEAU(0): clock: 96.3 MHz   Image Size:  367 x 230 mm
[    53.344] (II) NOUVEAU(0): h_active: 1440  h_sync: 1504  h_sync_end 1536 h_blank_end 1760 h_border: 0
[    53.344] (II) NOUVEAU(0): v_active: 900  v_sync: 903  v_sync_end 906 v_blanking: 912 v_border: 0
[    53.344] (II) NOUVEAU(0): Unknown vendor-specific block f
[    53.344] (II) NOUVEAU(0):  SAMSUNG
[    53.344] (II) NOUVEAU(0):  LTN170X2-L02
[    53.344] (II) NOUVEAU(0): EDID (in hex):
[    53.344] (II) NOUVEAU(0): 	00ffffffffffff004ca3473800000000
[    53.344] (II) NOUVEAU(0): 	00100103802517780a87f594574f8c27
[    53.344] (II) NOUVEAU(0): 	27505400000001010101010101010101
[    53.344] (II) NOUVEAU(0): 	0101010101019f25a04051840c304020
[    53.344] (II) NOUVEAU(0): 	33006fe6100000190000000f00000000
[    53.344] (II) NOUVEAU(0): 	000000000078e6022300000000fe0053
[    53.344] (II) NOUVEAU(0): 	414d53554e470a2020202020000000fe
[    53.344] (II) NOUVEAU(0): 	004c544e31373058322d4c30320a00f1
[    53.344] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[    53.344] (II) NOUVEAU(0): Modeline "1440x900"x60.0   96.31  1440 1504 1536 1760  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    53.344] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.77  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz)
[    53.344] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    53.344] (II) NOUVEAU(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    53.344] (II) NOUVEAU(0): Modeline "640x480"x59.9   23.98  640 664 720 800  480 483 487 500 -hsync +vsync (30.0 kHz)
[    53.344] (II) NOUVEAU(0): Modeline "720x400"x60.0   22.41  720 744 808 896  400 403 413 417 -hsync +vsync (25.0 kHz)
[    53.344] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
[    53.344] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.52  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
[    53.411] (II) NOUVEAU(0): EDID for output TV-1
[    53.411] (II) NOUVEAU(0): Output VGA-1 disconnected
[    53.411] (II) NOUVEAU(0): Output LVDS-1 connected
[    53.411] (II) NOUVEAU(0): Output TV-1 disconnected
[    53.411] (II) NOUVEAU(0): Using exact sizes for initial modes
[    53.411] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1440x900 +0+0
[    53.411] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[    53.411] (II) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[    53.411] (**) NOUVEAU(0):  Driver mode "1440x900": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
[    53.411] (II) NOUVEAU(0): Modeline "1440x900"x60.0   96.31  1440 1504 1536 1760  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    53.411] (**) NOUVEAU(0):  Mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[    53.411] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.77  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz)
[    53.411] (**) NOUVEAU(0):  Mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[    53.411] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    53.411] (**) NOUVEAU(0):  Mode "800x600": 38.3 MHz (scaled from 0.0 MHz), 37.4 kHz, 60.0 Hz
[    53.411] (II) NOUVEAU(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    53.411] (**) NOUVEAU(0):  Mode "640x480": 24.0 MHz (scaled from 0.0 MHz), 30.0 kHz, 59.9 Hz
[    53.411] (II) NOUVEAU(0): Modeline "640x480"x59.9   23.98  640 664 720 800  480 483 487 500 -hsync +vsync (30.0 kHz)
[    53.412] (**) NOUVEAU(0):  Mode "720x400": 22.4 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[    53.412] (II) NOUVEAU(0): Modeline "720x400"x60.0   22.41  720 744 808 896  400 403 413 417 -hsync +vsync (25.0 kHz)
[    53.412] (**) NOUVEAU(0):  Mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[    53.412] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
[    53.412] (**) NOUVEAU(0):  Mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[    53.412] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.52  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
[    53.412] (==) NOUVEAU(0): DPI set to (96, 96)
[    53.412] (II) Loading sub module "fb"
[    53.412] (II) LoadModule: "fb"
[    53.412] (II) Loading /usr/lib/xorg/modules/libfb.so
[    53.414] (II) Module fb: vendor="X.Org Foundation"
[    53.414] 	compiled for 1.20.11, module version = 1.0.0
[    53.414] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    53.414] (II) Loading sub module "shadowfb"
[    53.414] (II) LoadModule: "shadowfb"
[    53.415] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    53.419] (II) Module shadowfb: vendor="X.Org Foundation"
[    53.419] 	compiled for 1.20.11, module version = 1.0.0
[    53.419] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    53.419] (II) UnloadModule: "modesetting"
[    53.419] (II) Unloading modesetting
[    53.419] (II) UnloadModule: "fbdev"
[    53.419] (II) Unloading fbdev
[    53.419] (II) UnloadSubModule: "fbdevhw"
[    53.419] (II) Unloading fbdevhw
[    53.419] (II) UnloadModule: "vesa"
[    53.419] (II) Unloading vesa
[    53.428] (II) NOUVEAU(0): Channel setup complete.
[    53.446] (II) NOUVEAU(0): Hardware support for Present enabled
[    53.446] (II) NOUVEAU(0): [DRI2] Setup complete
[    53.446] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    53.446] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    53.446] (II) Loading sub module "exa"
[    53.446] (II) LoadModule: "exa"
[    53.446] (II) Loading /usr/lib/xorg/modules/libexa.so
[    53.447] (II) Module exa: vendor="X.Org Foundation"
[    53.447] 	compiled for 1.20.11, module version = 2.6.0
[    53.447] 	ABI class: X.Org Video Driver, version 24.1
[    53.447] (II) EXA(0): Driver allocated offscreen pixmaps
[    53.447] (II) EXA(0): Driver registered support for the following operations:
[    53.447] (II)         Solid
[    53.447] (II)         Copy
[    53.447] (II)         Composite (RENDER acceleration)
[    53.447] (II)         UploadToScreen
[    53.447] (II)         DownloadFromScreen
[    53.447] (==) NOUVEAU(0): Backing store enabled
[    53.447] (==) NOUVEAU(0): Silken mouse enabled
[    53.447] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[    53.447] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    53.447] (==) NOUVEAU(0): DPMS enabled
[    53.448] (II) Initializing extension Generic Event Extension
[    53.450] (II) Initializing extension SHAPE
[    53.451] (II) Initializing extension MIT-SHM
[    53.452] (II) Initializing extension XInputExtension
[    53.453] (II) Initializing extension XTEST
[    53.454] (II) Initializing extension BIG-REQUESTS
[    53.454] (II) Initializing extension SYNC
[    53.455] (II) Initializing extension XKEYBOARD
[    53.459] (II) Initializing extension XC-MISC
[    53.460] (II) Initializing extension SECURITY
[    53.460] (II) Initializing extension XFIXES
[    53.461] (II) Initializing extension RENDER
[    53.461] (II) Initializing extension RANDR
[    53.462] (II) Initializing extension COMPOSITE
[    53.463] (II) Initializing extension DAMAGE
[    53.466] (II) Initializing extension MIT-SCREEN-SAVER
[    53.466] (II) Initializing extension DOUBLE-BUFFER
[    53.467] (II) Initializing extension RECORD
[    53.467] (II) Initializing extension DPMS
[    53.468] (II) Initializing extension Present
[    53.468] (II) Initializing extension DRI3
[    53.468] (II) Initializing extension X-Resource
[    53.469] (II) Initializing extension XVideo
[    53.469] (II) Initializing extension XVideo-MotionCompensation
[    53.470] (II) Initializing extension SELinux
[    53.470] (II) SELinux: Disabled on system
[    53.470] (II) Initializing extension GLX
[    54.873] (II) AIGLX: Loaded and initialized nouveau
[    54.873] (II) GLX: Initialized DRI2 GL provider for screen 0
[    54.873] (II) Initializing extension XFree86-VidModeExtension
[    54.874] (II) Initializing extension XFree86-DGA
[    54.875] (II) Initializing extension XFree86-DRI
[    54.875] (II) Initializing extension DRI2
[    54.879] (II) NOUVEAU(0): NVEnterVT is called.
[    54.880] (II) NOUVEAU(0): Setting screen physical size to 380 x 238
[    54.880] resize called 1440 900
[    55.086] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    55.086] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    55.086] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    55.086] (II) LoadModule: "libinput"
[    55.087] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    55.124] (II) Module libinput: vendor="X.Org Foundation"
[    55.124] 	compiled for 1.20.8, module version = 0.30.0
[    55.124] 	Module class: X.Org XInput Driver
[    55.124] 	ABI class: X.Org XInput driver, version 24.1
[    55.124] (II) Using input driver 'libinput' for 'Power Button'
[    55.124] (**) Power Button: always reports core events
[    55.124] (**) Option "Device" "/dev/input/event6"
[    55.125] (**) Option "_source" "server/udev"
[    55.163] (II) event6  - Power Button: is tagged by udev as: Keyboard
[    55.164] (II) event6  - Power Button: device is a keyboard
[    55.164] (II) event6  - Power Button: device removed
[    55.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event6"
[    55.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    55.165] (**) Option "xkb_model" "pc105"
[    55.165] (**) Option "xkb_layout" "de,us"
[    55.165] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    55.241] (II) event6  - Power Button: is tagged by udev as: Keyboard
[    55.242] (II) event6  - Power Button: device is a keyboard
[    55.244] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    55.244] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    55.244] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    55.244] (II) Using input driver 'libinput' for 'Video Bus'
[    55.244] (**) Video Bus: always reports core events
[    55.244] (**) Option "Device" "/dev/input/event7"
[    55.244] (**) Option "_source" "server/udev"
[    55.248] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    55.248] (II) event7  - Video Bus: device is a keyboard
[    55.249] (II) event7  - Video Bus: device removed
[    55.249] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event7"
[    55.249] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    55.249] (**) Option "xkb_model" "pc105"
[    55.249] (**) Option "xkb_layout" "de,us"
[    55.249] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    55.253] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    55.254] (II) event7  - Video Bus: device is a keyboard
[    55.255] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    55.256] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    55.256] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    55.256] (II) Using input driver 'libinput' for 'Video Bus'
[    55.256] (**) Video Bus: always reports core events
[    55.256] (**) Option "Device" "/dev/input/event4"
[    55.256] (**) Option "_source" "server/udev"
[    55.260] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    55.260] (II) event4  - Video Bus: device is a keyboard
[    55.260] (II) event4  - Video Bus: device removed
[    55.260] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event4"
[    55.261] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    55.261] (**) Option "xkb_model" "pc105"
[    55.261] (**) Option "xkb_layout" "de,us"
[    55.261] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    55.266] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    55.266] (II) event4  - Video Bus: device is a keyboard
[    55.268] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    55.268] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    55.268] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    55.268] (II) Using input driver 'libinput' for 'Power Button'
[    55.268] (**) Power Button: always reports core events
[    55.268] (**) Option "Device" "/dev/input/event5"
[    55.268] (**) Option "_source" "server/udev"
[    55.271] (II) event5  - Power Button: is tagged by udev as: Keyboard
[    55.272] (II) event5  - Power Button: device is a keyboard
[    55.272] (II) event5  - Power Button: device removed
[    55.272] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event5"
[    55.272] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    55.272] (**) Option "xkb_model" "pc105"
[    55.272] (**) Option "xkb_layout" "de,us"
[    55.272] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    55.277] (II) event5  - Power Button: is tagged by udev as: Keyboard
[    55.277] (II) event5  - Power Button: device is a keyboard
[    55.279] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    55.279] (II) No input driver specified, ignoring this device.
[    55.279] (II) This device may have been added with another device file.
[    55.281] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    55.281] (II) No input driver specified, ignoring this device.
[    55.281] (II) This device may have been added with another device file.
[    55.282] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event9)
[    55.282] (II) No input driver specified, ignoring this device.
[    55.282] (II) This device may have been added with another device file.
[    55.283] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event10)
[    55.283] (II) No input driver specified, ignoring this device.
[    55.283] (II) This device may have been added with another device file.
[    55.284] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event11)
[    55.284] (II) No input driver specified, ignoring this device.
[    55.285] (II) This device may have been added with another device file.
[    55.286] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event12)
[    55.286] (II) No input driver specified, ignoring this device.
[    55.286] (II) This device may have been added with another device file.
[    55.287] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event13)
[    55.287] (II) No input driver specified, ignoring this device.
[    55.287] (II) This device may have been added with another device file.
[    55.288] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event14)
[    55.288] (II) No input driver specified, ignoring this device.
[    55.288] (II) This device may have been added with another device file.
[    55.289] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event15)
[    55.289] (II) No input driver specified, ignoring this device.
[    55.289] (II) This device may have been added with another device file.
[    55.291] (II) config/udev: Adding input device Gaming Mouse (/dev/input/event1)
[    55.291] (**) Gaming Mouse: Applying InputClass "evdev pointer catchall"
[    55.291] (**) Gaming Mouse: Applying InputClass "libinput pointer catchall"
[    55.291] (II) Using input driver 'libinput' for 'Gaming Mouse'
[    55.291] (**) Gaming Mouse: always reports core events
[    55.291] (**) Option "Device" "/dev/input/event1"
[    55.291] (**) Option "_source" "server/udev"
[    55.355] (II) event1  - Gaming Mouse: is tagged by udev as: Mouse
[    55.355] (II) event1  - Gaming Mouse: device is a pointer
[    55.356] (II) event1  - Gaming Mouse: device removed
[    55.358] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:093A:2533.0001/input/input2/event1"
[    55.358] (II) XINPUT: Adding extended input device "Gaming Mouse" (type: MOUSE, id 10)
[    55.359] (**) Option "AccelerationScheme" "none"
[    55.359] (**) Gaming Mouse: (accel) selected scheme none/0
[    55.359] (**) Gaming Mouse: (accel) acceleration factor: 2.000
[    55.359] (**) Gaming Mouse: (accel) acceleration threshold: 4
[    55.423] (II) event1  - Gaming Mouse: is tagged by udev as: Mouse
[    55.423] (II) event1  - Gaming Mouse: device is a pointer
[    55.425] (II) config/udev: Adding input device Gaming Mouse (/dev/input/mouse0)
[    55.425] (II) No input driver specified, ignoring this device.
[    55.425] (II) This device may have been added with another device file.
[    55.427] (II) config/udev: Adding input device Gaming Mouse Keyboard (/dev/input/event2)
[    55.427] (**) Gaming Mouse Keyboard: Applying InputClass "evdev keyboard catchall"
[    55.427] (**) Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[    55.427] (II) Using input driver 'libinput' for 'Gaming Mouse Keyboard'
[    55.428] (**) Gaming Mouse Keyboard: always reports core events
[    55.428] (**) Option "Device" "/dev/input/event2"
[    55.428] (**) Option "_source" "server/udev"
[    55.432] (II) event2  - Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[    55.433] (II) event2  - Gaming Mouse Keyboard: device is a keyboard
[    55.433] (II) event2  - Gaming Mouse Keyboard: device removed
[    55.434] (II) libinput: Gaming Mouse Keyboard: needs a virtual subdevice
[    55.434] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:093A:2533.0002/input/input4/event2"
[    55.434] (II) XINPUT: Adding extended input device "Gaming Mouse Keyboard" (type: MOUSE, id 11)
[    55.434] (**) Option "AccelerationScheme" "none"
[    55.434] (**) Gaming Mouse Keyboard: (accel) selected scheme none/0
[    55.434] (**) Gaming Mouse Keyboard: (accel) acceleration factor: 2.000
[    55.434] (**) Gaming Mouse Keyboard: (accel) acceleration threshold: 4
[    55.439] (II) event2  - Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[    55.439] (II) event2  - Gaming Mouse Keyboard: device is a keyboard
[    55.441] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    55.441] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    55.441] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    55.441] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    55.441] (**) AT Translated Set 2 keyboard: always reports core events
[    55.441] (**) Option "Device" "/dev/input/event0"
[    55.442] (**) Option "_source" "server/udev"
[    55.445] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    55.445] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    55.448] (II) event0  - AT Translated Set 2 keyboard: device removed
[    55.448] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    55.448] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    55.448] (**) Option "xkb_model" "pc105"
[    55.448] (**) Option "xkb_layout" "de,us"
[    55.448] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    55.452] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    55.453] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    55.456] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[    55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    55.457] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    55.457] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad"
[    55.457] (II) LoadModule: "synaptics"
[    55.458] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    55.461] (II) Module synaptics: vendor="X.Org Foundation"
[    55.461] 	compiled for 1.20.8, module version = 1.9.1
[    55.461] 	Module class: X.Org XInput Driver
[    55.461] 	ABI class: X.Org XInput driver, version 24.1
[    55.461] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    55.461] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    55.461] (**) Option "Device" "/dev/input/event16"
[    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 62)
[    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 113)
[    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    55.462] (**) Option "VertEdgeScroll" "1"
[    55.462] (**) Option "CornerCoasting" "1"
[    55.462] (**) Option "VertTwoFingerScroll" "1"
[    55.462] (**) Option "HorizTwoFingerScroll" "1"
[    55.462] (**) Option "RBCornerButton" "9"
[    55.462] (**) Option "LBCornerButton" "8"
[    55.462] (**) Option "TapButton1" "1"
[    55.462] (**) Option "TapButton2" "2"
[    55.462] (**) Option "TapButton3" "3"
[    55.463] (**) Option "CircularScrolling" "1"
[    55.463] (**) Option "CircScrollTrigger" "7"
[    55.463] (**) Option "MinSpeed" "0.5"
[    55.463] (**) Option "MaxSpeed" "1.0"
[    55.463] (**) Option "AccelFactor" "0.075"
[    55.463] (**) Option "CoastingSpeed" "8"
[    55.463] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    55.463] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    55.463] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input18/event16"
[    55.463] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    55.463] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.0
[    55.463] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 2.00
[    55.464] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.075
[    55.464] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    55.465] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    55.466] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    55.466] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    55.481] (**) Gaming Mouse Keyboard: Applying InputClass "evdev keyboard catchall"
[    55.481] (**) Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[    55.481] (II) Using input driver 'libinput' for 'Gaming Mouse Keyboard'
[    55.481] (**) Gaming Mouse Keyboard: always reports core events
[    55.481] (**) Option "Device" "/dev/input/event2"
[    55.481] (**) Option "_source" "_driver/libinput"
[    55.481] (II) libinput: Gaming Mouse Keyboard: is a virtual subdevice
[    55.481] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:093A:2533.0002/input/input4/event2"
[    55.481] (II) XINPUT: Adding extended input device "Gaming Mouse Keyboard" (type: KEYBOARD, id 14)
[    55.481] (**) Option "xkb_model" "pc105"
[    55.481] (**) Option "xkb_layout" "de,us"
[    55.481] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    60.812] (II) NOUVEAU(0): EDID vendor "SEC", prod id 14407
[    60.812] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    60.812] (II) NOUVEAU(0): Modeline "1440x900"x0.0   96.31  1440 1504 1536 1760  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    61.020] (II) NOUVEAU(0): EDID vendor "SEC", prod id 14407
[    61.020] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    61.020] (II) NOUVEAU(0): Modeline "1440x900"x0.0   96.31  1440 1504 1536 1760  900 903 906 912 -hsync -vsync (54.7 kHz eP)

So, maybe this piece of information contains some hints how to fix the issue on 5.10 antiX kernel, or what other options exist? Would rather like to run an antiX kernel than this debian one…

Regards
Robin

Attachments:

dmesg.txt

Windows is like a submarine. Open a window and serious problems will start.

October 27, 2022 at 10:29 am #91612

In reply to: testing 5.10 kernel

Member

Robin

I had promised to test your 5.10.142 kernel on this 32 bit notebook. So here I’m with the results. The kernel boots very fast, but it wouldn’t start X, asking for console login instead. Here are the logs and dmesg output (attached) I’ve saved immediately after startup. Maybe you can make something of it.

(inxi -zv8)

System:    Kernel: 5.10.142-antix.2-686-smp-pae i686 bits: 32 compiler: gcc v: 10.2.1 
           parameters: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all 
           Desktop: IceWM 2.9.4 vt: 7 dm: N/A Distro: antiX-21_386-full Grup Yorum 31 October 2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: <filter> 
           Chassis: No Enclosure type: 1 serial: <filter> 
           Mobo: Notebook model: RIM2000 serial: <filter> BIOS: Phoenix v: RIM00F0A 
           date: 05/27/2005 
Battery:   ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) volts: 16.6 
           min: 14.8 model: ARIMA LI4403A type: Unknown serial: <filter> status: Full 
Memory:    RAM: total: 1.96 GiB used: 858.2 MiB (42.7%) 
           RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. 
CPU:       Info: Single Core model: Intel Pentium M bits: 32 type: MCP arch: M Dothan family: 6 
           model-id: D (13) stepping: 8 microcode: 20 cache: L2: 2 MiB bogomips: 3457 
           Speed: 800 MHz min/max: 800/1733 MHz Core speed (MHz): 1: 800 
           Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx 
           pae pbe pge pse pti sep ss sse sse2 tm tm2 tsc vme 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: mmio_stale_data status: Unknown: No mitigations 
           Type: retbleed status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 
           mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: N/A 
           alternate: nvidiafb, nouveau bus-ID: 01:00.0 chip-ID: 10de:0148 class-ID: 0300 
           Display: x11 server: X.Org 1.20.11 driver: loaded: nouveau,vesa 
           unloaded: fbdev,modesetting alternate: nv display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 271x203mm (10.7x8.0") 
           s-diag: 339mm (13.3") 
           Monitor-1: default res: 1024x768 
           OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks 
           driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403 
           Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation 
           driver: saa7134 v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480 
           Sound Server-1: ALSA v: k5.10.142-antix.2-686-smp-pae running: yes 
Network:   Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 
           port: 2000 bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200 
           IF: eth0 state: down mac: <filter> 
           Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq 
           modules: wl port: 2000 bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280 
           IF: eth1 state: up mac: <filter> 
           IP v4: <filter> scope: global broadcast: <filter> 
           IP v6: <filter> scope: link 
           WAN IP: <filter> 
Bluetooth: Message: No bluetooth data found. 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 151.75 GiB used: 85.38 GiB (56.3%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A size: 93.16 GiB 
           block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> 
           rev: 3.02 scheme: MBR 
           ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk 
           size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> 
           rev: 8.01 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B 
           dev-links: cdrom,cdrw,dvd,dvdrw 
           Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r 
           state: running 
Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) 
           used: 13.6 GiB (23.6%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb 
           uuid: 862f493d-6951-444f-a3f6-734244b241e7 
           ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 5.4 MiB (11.1%) 
           fs: vfat dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 
           ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) 
           used: 34.65 GiB (83.2%) fs: ext3 dev: /dev/sda7 maj-min: 8:7 label: /daten3 
           uuid: c1bc867a-ec28-436d-831b-e47f334471ce 
           ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) 
           fs: ext3 dev: /dev/sda8 maj-min: 8:8 label: /daten4 
           uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da 
           ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) 
           fs: ext3 dev: /dev/sda5 maj-min: 8:5 label: /home 
           uuid: 94021be3-c160-4166-a151-92ad72b26f9a 
           ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 7.95 GiB (81.6%) 
           fs: ext4 dev: /dev/sda6 maj-min: 8:6 label: antiX 
           uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec 
           ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 4.3 GiB (55.2%) 
           fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal 
           uuid: 19eaea0e-493b-4007-8eff-f14aca40363f 
           ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) 
           fs: ext4 dev: /dev/sda10 maj-min: 8:10 label: N/A 
           uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d 
Swap:      Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) 
           ID-1: swap-1 type: partition size: 2.16 GiB used: 0 KiB (0.0%) priority: -2 
           dev: /dev/sda9 maj-min: 8:9 label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 
Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: <superuser required> label: N/A uuid: N/A 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Device-1: 1-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 
           serial: <filter> 
           Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s 
           chip-ID: 1d6b:0001 class-ID: 0900 
           Device-1: 2-1:2 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA 
           chip-ID: 093a:2533 class-ID: 0300 
           Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s 
           chip-ID: 1d6b:0001 class-ID: 0900 
           Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s 
           chip-ID: 1d6b:0001 class-ID: 0900 
Sensors:   Message: No sensor data found. Is lm-sensors configured? 
Repos:     Packages: apt: 1819 lib: 879 
           Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http: //ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye main nosystemd nonfree
           Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 
           1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http: //ftp.de.debian.org/debian/ bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http: //ftp.de.debian.org/debian/ bullseye main contrib non-free
           2: deb http: //security.debian.org/ bullseye-security main contrib non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 of 130 
           1: cpu: 31.4% command: firefox-esr pid: 6428 mem: 159.9 MiB (7.9%) 
           2: cpu: 24.0% command: firefox-esr pid: 6235 mem: 363.9 MiB (18.1%) 
           3: cpu: 13.0% command: yad pid: 7556 mem: 24.1 MiB (1.2%) 
           4: cpu: 4.7% command: xorg pid: 3738 mem: 71.5 MiB (3.5%) 
           5: cpu: 4.7% command: gtkdialog pid: 7523 mem: 23.8 MiB (1.1%) 
           Memory top: 5 of 130 
           1: mem: 363.9 MiB (18.1%) command: firefox-esr pid: 6235 cpu: 24.0% 
           2: mem: 159.9 MiB (7.9%) command: firefox-esr pid: 6428 cpu: 31.4% 
           3: mem: 115.4 MiB (5.7%) command: firefox-esr pid: 6374 cpu: 1.3% 
           4: mem: 77.9 MiB (3.8%) command: firefox-esr pid: 6313 cpu: 0.1% 
           5: mem: 71.5 MiB (3.5%) command: xorg pid: 3738 cpu: 4.7% 
Info:      Processes: 130 Uptime: 18m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 
           tool: service Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release 
           inxi: 3.3.06

(initrd.log)

Run custom code before reading boot codes: /live/custom/antiX/0.sh
Translate to de
Schrift aufLat15-VGA16 setzen
setfont /live/locale/fonts/Lat15-VGA16.psf -C /dev/console
Neue Bildschirmbreite 80
@ 1.59 starting tsplash
=== initrd bootstrap ==================================================
initrd init started at 0.23 seconds
Willkommen bei antiX 21 (Grup Yorum) 32-bit pae!
  BusyBox v1.31.1 (2021-02-03 15:54:12 MST) multi-call binary.
  ntfs-3g 2017.3.23AR.3 integrated FUSE 28
           initrd version: 8.30.14-x08
             initrd built: Fri, 04 Jun 2021 11:43:21 +0000
             Total Memory:  2009 M
              Used Memory:    37 M
             Linux kernel: 5.10.142-antix.2-686-smp-pae
             Screen width: 80
              Kernel arch: i686
                 Hardware: Notebook RIM2000
Augenblickliche Bootparameter:
     lang=de_DE tz=Europe/Berlin quiet splasht disable=lxF mount=all xorg=nouveau
overlay gefunden
Lade Hardware spezifische Module ...
Prüfe usb,cd Geräte. Suche nach boot Datei(en) antiX/linuxfs
Herausgefilterte Geräte  /dev/sr0
Versuch wiederholen für 15 Sekunden .
Neue(s) Gerät(e) /dev/sdb2 /dev/sdb1 /dev/sdb /dev/sr0 gefunden
mount -t vfat -o umask=000,dmask=002,fmask=113,shortname=winnt,uid=1000,gid=1000 /dev/sdb2 /live/boot-dev
mount -t ext4 -o ro,noatime /dev/sdb1 /live/boot-dev
Eingehängtes boot Gerät. Gerät /dev/sdb1 eingehängt auf /live/boot-dev
boot Gerät Dateisystem: ext4
boot device model: Flash Disk
Spent 1.63 seconds looking for boot file(s) antiX/linuxfs
loop times: 0.25
boot device uuid: 862f493d-6951-444f-a3f6-734244b241e7
BOOT_MP:    /live/boot-dev
SQFILE_DEV: /dev/sdb1
SQFILE_MP   /live/boot-dev
Starte Generator für Zufallsnummern...
Speichere zufälligen seed
Mount file /live/boot-dev/antiX/linuxfs at /live/linux
mount -t squashfs -o loop,ro /live/boot-dev/antiX/linuxfs /live/linux
sqfs_vid: ==== a246bdfb23d4f341469b4de1b42f134d
LD_PATH: /live/linux/lib:/live/linux/lib/i386-linux-gnu:/live/linux/usr/lib
Loaded 13 module(s)
nls_utf8 nls_cp437 uas usb_storage hid_generic uhci_hcd firewire_ohci firewire_core dm_crypt dm_mod overlay battery fotg210_hcd
precheck filesystem on /dev/sdb1
Erstellen aufs ram tmpfs bei /live/aufs-ram       (1577 MB)
/bin/mount -t tmpfs -o size=1577m,noatime tmpfs /live/aufs-ram
Mount overlayfs at /live/aufs
mount -t overlay overlay -o lowerdir=/live/linux,upperdir=/live/aufs-ram/upper,workdir=/live/aufs-ram/work /live/aufs
Load microcode
Found one video display device
Erstellen   /media tmpfs bei /live/aufs/media     (10 MB)
/bin/mount -t tmpfs -o size=10m,noatime tmpfs /live/aufs/media
Erstellen     /run tmpfs bei /live/aufs/run       (1111 MB)
/bin/mount -t tmpfs -o size=1111m,mode=755,nodev,noatime tmpfs /live/aufs/run
Erstellen    /live tmpfs bei /live/aufs/live      (100 MB)
/bin/mount -t tmpfs -o size=100m,mode=755,noatime tmpfs /live/aufs/live
Run custom code before: /live/custom/antiX/0.sh
mount --move /live/aufs-ram /live/aufs/live/aufs-ram
mount --move /live/boot-dev /live/aufs/live/boot-dev
mount --move /live/linux /live/aufs/live/linux
Run custom code after: /live/custom/antiX/0.sh
Run custom code before running live init.d scripts: /live/custom/antiX/8.sh

Das initrd init Programm brauchte 16.41 Sekunden
======================================================================
cp /live/config/tsplash/progress /live/aufs/live/config/tsplash/progress
cp /live/config/tsplash/tsplash.log /live/aufs/live/config/tsplash/tsplash.log

(live-init.log)

Thu Oct 27 07:18:26 CEST 2022  /live/etc/init.d/live-usb-save
live-usb-save: Restore state information
  Restore machine specific state file /etc/udev/rules.d/70-persistent-net.rules
  Restore machine specific state file /var/lib/connman/wifi_0012f006fa18_574b3233_managed_psk/settings
  Restore general state file /etc/fstab.mount
  Restore general state file /var/log/live/persist-save.log

Thu Oct 27 07:18:26 CEST 2022  /live/etc/init.d/live-L10n
live-L10n: Lokalisierung der Konsole und Zeitzone
  Einstellung der Zeitzone und der Ortszeit auf Europe/Berlin
  Einstellung des Gebietsschema auf de_DE.UTF-8

Thu Oct 27 07:18:27 CEST 2022  /live/etc/init.d/live-init
live-init: Lokalisierung/Konfiguration X-Window
  Microcode laden
  Alle Geräte werden gemountet
  make-fstab: Remove all dynamic entries from /etc/fstab
  make-fstab: Create new /etc/fstab
  make-fstab: Automount /dev/sda1 at /media/antiX-Frugal
  make-fstab: Automount /dev/sda5 at /media/_home
  make-fstab: Automount /dev/sda6 at /media/antiX
  make-fstab: Automount /dev/sda7 at /media/_daten3
  make-fstab: Automount /dev/sda8 at /media/_daten4
  make-fstab: Automount /dev/sda10 at /media/sda10
  make-fstab: Automount /dev/sdb2 at /media/ANTIX-UEFI
  make-fstab: Put 9 hard drive entries into /etc/fstab
  make-fstab: Put 1 removable entry into /etc/fstab
  Repository-Lokalisierung auf Europe/Berlin
  Menü-Lokalisierung auf /live/etc/init.d/live-init in /etc/skel
  Einstellung xkb-layout auf de,us
  Einstellung xkb-model auf pc105
  Einstellung xkb-variant auf 
  Einstellung xkb-options auf grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll
  CONSOLE KEYMAP: /etc/default/keyboard
  Nach Hardware-spezifischen Video-Module wird gescannt...
  KMS Video-Modul(e) gefunden nouveau
  Datei /etc/X11/xorg.conf wird mit nouveau konfiguriert
  Standardbenutzer demo gefunden

Thu Oct 27 07:18:35 CEST 2022  /live/etc/init.d/live-disable-services
live-disable-services: Customizing services
  Disabling some services (L, lean)
  Disabling more services (X, Xtralean)

(Xorg.0.log))

[    32.991] 
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[    32.991] Build Operating System: linux Debian
[    32.991] Current Operating System: Linux antix1 5.10.142-antix.2-686-smp-pae #1 SMP Sat Sep 10 19:09:21 EEST 2022 i686
[    32.991] Kernel command line: lang=de_DE tz=Europe/Berlin quiet splasht disable=lxF mount=all xorg=nouveau
[    32.991] Build Date: 10 November 2021  11:00:13AM
[    32.991] xorg-server 2:1.20.11-1.0nosystemd1 (https://www.debian.org/support) 
[    32.991] Current version of pixman: 0.40.0
[    32.991] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    32.991] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    32.994] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 07:18:55 2022
[    33.004] (==) Using config file: "/etc/X11/xorg.conf"
[    33.004] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    33.004] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    33.019] (==) No Layout section.  Using the first Screen section.
[    33.019] (==) No screen section available. Using defaults.
[    33.019] (**) |-->Screen "Default Screen Section" (0)
[    33.019] (**) |   |-->Monitor "<default monitor>"
[    33.022] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    33.022] (**) |   |-->Device "Device0"
[    33.022] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    33.022] (==) Automatically adding devices
[    33.022] (==) Automatically enabling devices
[    33.022] (==) Automatically adding GPU devices
[    33.022] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    33.042] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    33.042] 	Entry deleted from font path.
[    33.044] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    33.044] 	Entry deleted from font path.
[    33.044] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    33.044] 	Entry deleted from font path.
[    33.044] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	built-ins
[    33.044] (==) ModulePath set to "/usr/lib/xorg/modules"
[    33.044] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    33.044] (II) Loader magic: 0x70a700
[    33.044] (II) Module ABI versions:
[    33.044] 	X.Org ANSI C Emulation: 0.4
[    33.044] 	X.Org Video Driver: 24.1
[    33.044] 	X.Org XInput driver : 24.1
[    33.044] 	X.Org Server Extension : 10.0
[    33.098] (--) PCI:*(1@0:0:0) 10de:0148:161f:203d rev 162, Mem @ 0xa0000000/67108864, 0xc0000000/134217728, 0x90000000/16777216, BIOS @ 0x????????/131072
[    33.098] (II) LoadModule: "glx"
[    33.131] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    33.243] (II) Module glx: vendor="X.Org Foundation"
[    33.243] 	compiled for 1.20.11, module version = 1.0.0
[    33.243] 	ABI class: X.Org Server Extension, version 10.0
[    33.243] (II) LoadModule: "nouveau"
[    33.248] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    33.285] (II) Module nouveau: vendor="X.Org Foundation"
[    33.285] 	compiled for 1.20.10, module version = 1.0.17
[    33.285] 	Module class: X.Org Video Driver
[    33.285] 	ABI class: X.Org Video Driver, version 24.1
[    33.285] (II) NOUVEAU driver Date:   Sat Jan 23 12:24:42 2021 -0500
[    33.285] (II) NOUVEAU driver for NVIDIA chipset families :
[    33.285] 	RIVA TNT            (NV04)
[    33.285] 	RIVA TNT2           (NV05)
[    33.285] 	GeForce 256         (NV10)
[    33.285] 	GeForce 2           (NV11, NV15)
[    33.285] 	GeForce 4MX         (NV17, NV18)
[    33.285] 	GeForce 3           (NV20)
[    33.285] 	GeForce 4Ti         (NV25, NV28)
[    33.288] 	GeForce FX          (NV3x)
[    33.288] 	GeForce 6           (NV4x)
[    33.288] 	GeForce 7           (G7x)
[    33.289] 	GeForce 8           (G8x)
[    33.289] 	GeForce 9           (G9x)
[    33.289] 	GeForce GTX 2xx/3xx (GT2xx)
[    33.289] 	GeForce GTX 4xx/5xx (GFxxx)
[    33.289] 	GeForce GTX 6xx/7xx (GKxxx)
[    33.289] 	GeForce GTX 9xx     (GMxxx)
[    33.289] 	GeForce GTX 10xx    (GPxxx)
[    33.289] (++) using VT number 7

[    33.445] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -19
[    33.446] (EE) No devices detected.
[    33.446] (EE) 
Fatal server error:
[    33.446] (EE) no screens found(EE) 
[    33.446] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    33.446] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    33.446] (EE) 
[    33.448] (EE) Server terminated with error (1). Closing log file.

(slimski.log)

envlang received as: de_DE

slimski: waiting for X server to begin accepting connections

Giving up.
slimski: unable to connect to X server

So I’m back to 4.9.0-326-antix.1-686-smp-pae, which works great in antiX 21 test USB-stick, and for everyday usage I’m still on antiX 19 using 4.19.0-256-antix.1-686-smp-pae with old nvidia proprietary drivers, allowing way better graphics performance on this device than nouveau still.

Regards
Robin

Attachments:

dmesg_nouveau.txt

Windows is like a submarine. Open a window and serious problems will start.

October 10, 2022 at 10:18 am #90503

Topic: [solved]Visibility of Conky is crashing in antiX v19.4

in forum Software

Member

scruffyeagle

During the past few days, Conky has seemed as if it’s crashing. I think this problem is the result of doing updates. (Several days ago, I did a massive updating session using Syaptic, and this problem never happened before that.) Conky used to start up and be displayed on the screen at initial boot time, but now it doesn’t get shown at all without direct intervention.

When I use the menu to start it (Menu click/ Desktop/ Conky on/off), the 1st click seemingly does nothing, then the 2nd click puts Conky up on the desktop. My suspicion, is that Conky is actually running, but not visible on the desktop – and the 1st click turns it off. Then, the 2nd click turns it on and it becomes visible – but, for less than a minute. After which, it vanishes again.

Here’s the output of “inxi -Fxxxrz”:
——————–

System:
  Kernel: 4.9.0-264-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc
    v: 8.3.0 Desktop: IceWM v: 3.0.0 vt: 7 dm: SLiM v: 1.3.6
    Distro: antiX-19.4_x64-full Grup Yorum 20 May 2021
    base: Debian GNU/Linux 10 (buster)
Machine:
  Type: Portable System: Dell product: Latitude E6400 v: N/A
    serial: <superuser required> Chassis: type: 8 serial: <superuser required>
  Mobo: Dell model: 0U692R serial: <superuser required> BIOS: Dell v: A34
    date: 06/04/2013
Battery:
  ID-1: BAT0 charge: 76.4 Wh (102.0%) condition: 74.9/76.4 Wh (98.1%)
    volts: 12.2 min: 11.1 model: Panasonic DELL FU44196 type: Li-ion
    serial: <filter> status: full
CPU:
  Info: dual core model: Intel Core2 Duo P8600 bits: 64 type: MCP
    smt: <unsupported> arch: Penryn Yorkfield rev: A cache: L1: 128 KiB
    L2: 3 MiB
  Speed (MHz): avg: 1200 high: 1600 min/max: 800/2401 boost: enabled cores:
    1: 1600 2: 800 bogomips: 9576
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
Graphics:
  Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Dell
    driver: i915 v: kernel arch: Gen5 ports: active: LVDS-1
    empty: DP-1, DP-2, DP-3, HDMI-A-1, HDMI-A-2, VGA-1 bus-ID: 00:02.0
    chip-ID: 8086:2a42 class-ID: 0300
  Display: x11 server: X.Org v: 1.20.4 driver: X: loaded: intel gpu: i915
    display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1280x800 s-dpi: 96 s-size: 338x211mm (13.31x8.31")
    s-diag: 398mm (15.69")
  Monitor-1: LVDS-1 mapped: LVDS1 model: Seiko Epson 0x5441 res: 1280x800
    hz: 60 dpi: 107 size: 303x190mm (11.93x7.48") diag: 358mm (14.1")
    modes: 1280x800
  OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express v: 2.1 Mesa 18.3.6
    direct render: Yes
Audio:
  Device-1: Intel 82801I HD Audio vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403
  Sound Server-1: ALSA v: k4.9.0-264-antix.1-amd64-smp running: yes
Network:
  Device-1: Intel 82567LM Gigabit Network vendor: Dell driver: e1000e
    v: 3.2.6-k port: efe0 bus-ID: 00:19.0 chip-ID: 8086:10f5 class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: Intel WiFi Link 5100 driver: iwlwifi v: kernel bus-ID: 0c:00.0
    chip-ID: 8086:4232 class-ID: 0280
  IF: wlan0 state: down mac: <filter>
RAID:
  Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
    v: 3.0 port: 6ea0 bus-ID: 00:1f.2 chip-ID: 8086:282a rev: N/A
    class-ID: 0104
Drives:
  Local Storage: total: 1.14 TiB used: 288.89 GiB (24.8%)
  ID-1: /dev/sda vendor: Toshiba model: MK2561GSYN size: 232.89 GiB
    speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: 0C scheme: MBR
  ID-2: /dev/sdb type: USB vendor: Western Digital
    model: WD My Passport 0748 size: 931.48 GiB type: N/A serial: <filter>
    rev: 1019 scheme: MBR
Partition:
  ID-1: / size: 28.71 GiB used: 7.43 GiB (25.9%) fs: ext4 dev: /dev/sda5
Swap:
  ID-1: swap-1 type: partition size: 9.77 GiB used: 30.9 MiB (0.3%)
    priority: -1 dev: /dev/sda3
Sensors:
  System Temperatures: cpu: 41.0 C mobo: N/A sodimm: SODIMM C
  Fan Speeds (RPM): cpu: 3013
Repos:
  Packages: apt: 2141
  Active apt repos in: /etc/apt/sources.list.d/antix.list
    1: deb http://mirrors.rit.edu/mxlinux/mx-packages/antix/buster/ buster main nonfree nosystemd
  Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
    1: deb http://deb.debian.org/debian/ buster-backports non-free contrib main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://ftp.us.debian.org/debian/ buster-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://ftp.us.debian.org/debian/ buster main contrib non-free
    2: deb http://security.debian.org/ buster/updates main contrib non-free
  No active apt repos in: /etc/apt/sources.list.d/onion.list
  No active apt repos in: /etc/apt/sources.list.d/various.list
Info:
  Processes: 210 Uptime: 13h 13m wakeups: 11 Memory: 3.82 GiB
  used: 1.52 GiB (40.0%) Init: SysVinit v: 2.93 runlevel: 5 default: 5
  Compilers: gcc: 8.3.0 alt: 8 Shell: Bash v: 5.0.3 running-in: roxterm
  inxi: 3.3.19

This topic was modified 6 months, 4 weeks ago by anticapitalista. Reason: added solved

October 9, 2022 at 3:07 pm #90416

Topic: Am I using the right kernel for my system? [SOLVED]

in forum New Users and General Questions

Member

CyberGhost

Hi, I’ve been meaning to getting around to asking this. Based on my system info below, am I using the right kernel for my system? Also, I am using the zzzIcewm. What is the lightest, less resource intensive WM to use? Even when I update my system, it uses 100% of the CPU. Which I don’t know if that is normal due to my old hardware or perhaps making some changes might make it use less. In addition, I can’t seem to find a browser light enough to run on my system without it using 100% of the CPU and maxing out the RAM. Any ideas or suggestions are greatly appreciated thanks!

System:
  Kernel: 5.10.137-antix.1-486-smp arch: i686 bits: 32 compiler: gcc v: 10.2.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.137-antix.1-486-smp
    root=UUID=370a8dff-c4b8-458d-8335-72c7bb799c0e ro quiet
  Desktop: IceWM v: 2.9.9 vt: 7 dm: slimski v: 1.5.0
    Distro: antiX-21_386-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: Laptop System: Hewlett-Packard product: HP Pavilion dv1000 (PR425UA#ABA) v: Rev 1
    serial: <superuser required> Chassis: Quanta type: 10 serial: <superuser required>
  Mobo: Quanta model: 09B8 v: 34.20 serial: <superuser required> BIOS: Hewlett-Packard v: F.12
    date: 11/08/2004
Battery:
  ID-1: BAT0 charge: 45.5 Wh (100.0%) condition: 45.5/88.8 Wh (51.2%) volts: 12.4 min: 14.8
    model: Hewlett-Packard JM-12 type: Li-ion serial: <filter> status: not charging
Memory:
  RAM: total: 964.8 MiB used: 272 MiB (28.2%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots:
  Permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Pentium M bits: 32 arch: M Dothan built: 2003-05 process: Intel 90nm
    family: 6 model-id: 0xD (13) stepping: 6 microcode: 0x18
  Topology: cpus: 1x cores: 1 smt: <unsupported> cache: 2 MiB note: check
  Speed (MHz): 600 min/max: 600/1600 scaling: driver: acpi-cpufreq governor: schedutil core:
    1: 600 bogomips: 3192
  Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr pbe pge
    pse sep ss sse sse2 tm tm2 tsc vme
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX unsupported
  Type: l1tf status: Vulnerable
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown status: Vulnerable
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2
    mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel 82852/855GM Integrated Graphics vendor: Hewlett-Packard driver: i915 v: kernel
    arch: Gen2 process: Intel 130nm built: 2002-03 ports: active: LVDS-1 empty: VGA-1
    bus-ID: 00:02.0 chip-ID: 8086:3582 class-ID: 0300
  Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: intel
    unloaded: fbdev,modesetting,vesa gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1280x768 s-dpi: 96 s-size: 338x203mm (13.31x7.99") s-diag: 394mm (15.52")
  Monitor-1: LVDS-1 mapped: LVDS1 model: Seiko Epson 0x5642 built: 2004 res: 1280x768 hz: 60
    dpi: 108 gamma: 1.2 chroma: red: x: 0.580 y: 0.341 green: x: 0.310 y: 0.549 blue: x: 0.153
    y: 0.153 white: x: 0.314 y: 0.329 size: 300x180mm (11.81x7.09") diag: 356mm (14") ratio: 15:9
    modes: 1280x768
  OpenGL: renderer: Mesa DRI Intel 852GM/855GM x86/MMX/SSE2 v: 1.3 Mesa 20.3.5
    direct render: Yes
Audio:
  Device-1: Intel 82801DB/DBL/DBM AC97 Audio vendor: Hewlett-Packard driver: snd_intel8x0
    v: kernel bus-ID: 00:1f.5 chip-ID: 8086:24c5 class-ID: 0401
  Sound Server-1: ALSA v: k5.10.137-antix.1-486-smp running: yes
Network:
  Device-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Hewlett-Packard
    driver: 8139too v: 0.9.28 modules: 8139cp port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:8139
    class-ID: 0200
  IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> type: dynamic mngtmpaddr scope: global
  IP v6: <filter> scope: link
  Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network vendor: Hewlett-Packard
    driver: ipw2200 v: 1.2.2kmprq modules: wl bus-ID: 02:06.0 chip-ID: 8086:4220 class-ID: 0280
  IF: eth1 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 149.05 GiB used: 4.56 GiB (3.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Hitachi model: HTS541616J9AT00 size: 149.05 GiB
    block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: A70H
    scheme: MBR
  Optical-1: /dev/sr0 vendor: PIONEER model: DVD-RW DVR-K14 rev: 1.14
    dev-links: cdrom,cdrw,dvd,dvdrw
  Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running
Partition:
  ID-1: / raw-size: 147.54 GiB size: 144.17 GiB (97.71%) used: 4.56 GiB (3.2%) fs: ext4
    dev: /dev/sda1 maj-min: 8:1 label: rootantiX21 uuid: 370a8dff-c4b8-458d-8335-72c7bb799c0e
Swap:
  Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100)
  ID-1: swap-1 type: partition size: 1.5 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
    maj-min: 8:2 label: swapantiX uuid: 5b861ae7-9b9f-4848-bedb-5afd5502cf4c
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
  Device-1: 2-1:2 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid
    interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301
  Hub-3: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
  Hub-4: 4-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
Sensors:
  Message: No sensor data found. Is lm-sensors configured?
Repos:
  Packages: apt: 1571 lib: 744
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/antix.list
    1: deb http: //mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye/ bullseye main nosystemd nonfree
  Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list
    1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http: //ftp.us.debian.org/debian/ bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http: //ftp.us.debian.org/debian/ bullseye main contrib non-free
    2: deb http: //security.debian.org/ bullseye-security main contrib non-free
  No active apt repos in: /etc/apt/sources.list.d/various.list
Processes:
  CPU top: 5 of 117
  1: cpu: 25.0% command: yad pid: 2475 mem: 23.2 MiB (2.4%)
  2: cpu: 5.3% command: xorg pid: 1802 mem: 25.3 MiB (2.6%)
  3: cpu: 2.9% command: desktop-session started by: bash pid: 2049 mem: 3.27 MiB (0.3%)
  4: cpu: 2.8% command: slimski pid: 1793 mem: 7.81 MiB (0.8%)
  5: cpu: 2.0% command: init pid: 1 mem: 1.74 MiB (0.1%)
  Memory top: 5 of 117
  1: mem: 25.3 MiB (2.6%) command: xorg pid: 1802 cpu: 5.3%
  2: mem: 23.2 MiB (2.4%) command: yad pid: 2475 cpu: 25.0%
  3: mem: 17.5 MiB (1.8%) command: zzzfm pid: 2129 cpu: 1.1%
  4: mem: 15.8 MiB (1.6%) command: volumeicon pid: 2185 cpu: 0.2%
  5: mem: 15.4 MiB (1.5%) command: icewm pid: 2123 cpu: 1.3%
Info:
  Processes: 117 Uptime: 1m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service
  Compilers: gcc: 10.2.1 alt: 10 Client: IceWM v: 2.9.9 inxi: 3.3.19

This topic was modified 7 months ago by CyberGhost. Reason: Issue has been solved

October 9, 2022 at 4:52 am #90405

Topic: AntiX 21 Full 64 bit install

in forum Hardware

Forum Admin

rokytnji

ran inxi -zv8 as sudo

System:
  Kernel: 5.10.57-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc
    v: 10.2.1 parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.57-antix.1-amd64-smp
    root=UUID=12799d61-59de-4d35-b6f1-2fb049e9a814 ro quiet
  Desktop: IceWM v: 3.0.0 dm: slimski v: 1.5.0
    Distro: antiX-21_x64-full Grup Yorum 31 October 2021
    base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: Desktop System: Acer product: Aspire T180 v: R01-B3 serial: <filter>
  Mobo: Acer model: EM61SM/EM61PM serial: N/A BIOS: Phoenix v: R01-B3
    date: 02/07/2007
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 2.67 GiB used: 1008.8 MiB (36.9%)
  Array-1: capacity: 16 GiB slots: 4 EC: None max-module-size: 4 GiB
  Device-1: A0 info: single-bank type: N/A size: 512 MiB speed: N/A
    volts: N/A width (bits): data: 64 total: 64 manufacturer: N/A part-no: N/A
    serial: N/A
  Device-2: A1 info: single-bank type: N/A size: 512 MiB speed: N/A
    volts: N/A width (bits): data: 64 total: 64 manufacturer: N/A part-no: N/A
    serial: N/A
  Device-3: A2 info: double-bank type: N/A size: 1024 MiB speed: N/A
    volts: N/A width (bits): data: 64 total: 64 manufacturer: N/A part-no: N/A
    serial: N/A
  Device-4: A3 info: double-bank type: N/A size: 1024 MiB speed: N/A
    volts: N/A width (bits): data: 64 total: 64 manufacturer: N/A part-no: N/A
    serial: N/A
PCI Slots:
  Slot: 1 type: PCI bits: 32 status: available length: long volts: 5.0
    bus-ID: N/A
  Slot: 2 type: PCI bits: 32 status: in use length: long volts: 5.0
    bus-ID: N/A
  Slot: 3 type: PCI bits: 32 status: in use length: long volts: 5.0
    bus-ID: N/A
  Slot: 4 type: PCIe bits: 32 status: in use length: long volts: 5.0
    bus-ID: N/A
  Slot: 5 type: PCIe bits: 32 status: in use length: long volts: 5.0
    bus-ID: N/A
  Slot: 6 type: PCIe bits: 32 status: in use length: long volts: 5.0
    bus-ID: N/A
  Slot: 0 type: PCI bits: 32 status: in use length: long volts: 5.0
    bus-ID: N/A
CPU:
  Info: model: AMD Athlon 64 3800+ socket: 940 (M2) note: check bits: 64
    type: UP arch: K8 process: AMD 65-130nm family: 0xF (15)
    model-id: 0x4F (79) stepping: 2 microcode: N/A
  Topology: cpus: 1x cores: 1 smt: <unsupported> cache:
    L1: 2x 128 KiB (256 KiB) desc: d-1x64 KiB; i-1x64 KiB
    L2: 2x 512 KiB (1024 KiB) desc: 1x512 KiB
  Speed (MHz): 2400 min/max: 1000/2400 base/boost: 2412/3000 scaling:
    driver: powernow-k8 governor: performance volts: 1.4 V ext-clock: 201 MHz
    core: 1: 2400 bogomips: 4821
  Flags: 3dnow 3dnowext 3dnowprefetch apic clflush cmov cpuid cr8_legacy
    cx16 cx8 de extapic extd_apicid fpu fxsr fxsr_opt lahf_lm lm mca mce mmx
    mmxext msr mtrr nopl nx pae pat pge pni pse pse36 rdtscp rep_good sep sse
    sse2 svm syscall tsc vme vmmcall
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2
    mitigation: Full AMD retpoline, STIBP: disabled, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA C61 [GeForce 6100 nForce 405] vendor: Elite Systems
    driver: nvidiafb v: kernel alternate: nouveau non-free: series: 304.xx
    status: legacy (EOL) last: release: 304.137 kernel: 4.13 xorg: 1.19
    arch: Curie process: 90-130nm built: 2003-13 bus-ID: 00:0d.0
    chip-ID: 10de:03d1 class-ID: 0300
  Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: fbdev,nouveau
    unloaded: modesetting,vesa alternate: nv gpu: nvidiafb display-ID: :0.0
    screens: 1
  Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.65x9.37")
    s-diag: 485mm (19.11")
  Monitor-1: default res: 1600x900 hz: 60 size: N/A modes: N/A
  OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5
    compat-v: 3.1 direct render: Yes
Audio:
  Device-1: NVIDIA MCP61 High Definition Audio vendor: Elite Systems
    driver: snd_hda_intel v: kernel bus-ID: 00:05.0 chip-ID: 10de:03f0
    class-ID: 0403
  Sound Server-1: ALSA v: k5.10.57-antix.1-amd64-smp running: yes
Network:
  Device-1: Marvell 88E8056 PCI-E Gigabit Ethernet vendor: Elite Systems
    driver: sky2 v: 1.30 pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: ac00
    bus-ID: 03:00.0 chip-ID: 11ab:4364 class-ID: 0200
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> scope: link
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.82 TiB used: 4.44 GiB (0.2%)
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000DM001-1CH164
    family: Barracuda 7200.14 (AF) size: 1.82 TiB block-size: physical: 4096 B
    logical: 512 B sata: 3.1 speed: 3.0 Gb/s type: HDD rpm: 7200
    serial: <filter> rev: CC27 temp: 42 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 321d 7h cycles: 240
    read: 855.5 GiB written: 1.7 TiB Pre-Fail: attribute: Spin_Retry_Count
    value: 100 worst: 100 threshold: 97
  Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVD-RW_GSA-H41N rev: RA00
    dev-links: cdrom,cdrw,dvd,dvdrw
  Features: speed: 40 multisession: yes audio: yes dvd: yes
    rw: cd-r,cd-rw,dvd-r state: running
Partition:
  ID-1: / raw-size: 162.11 GiB size: 158.51 GiB (97.78%)
    used: 4.44 GiB (2.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2
    maj-min: 8:2 label: rootantiX21
    uuid: 12799d61-59de-4d35-b6f1-2fb049e9a814
Swap:
  Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100)
  ID-1: swap-1 type: partition size: 39.06 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/sda1 maj-min: 8:1 label: N/A
    uuid: fa6b228c-d778-418b-bacd-b73f51d4da32
Unmounted:
  ID-1: /dev/sda4 maj-min: 8:4 size: 1 KiB fs: N/A label: N/A uuid: N/A
  ID-2: /dev/sda5 maj-min: 8:5 size: 830.92 GiB fs: ext3 label: /data1
    uuid: 28035362-9082-4272-91da-5eb5eb9d0e20
  ID-3: /dev/sda6 maj-min: 8:6 size: 830.92 GiB fs: ext4 label: /data2
    uuid: 43fa0766-2bd8-4235-a7e4-1cc7b50fc89b
USB:
  Hub-1: 1-0:1 info: Full speed or root hub ports: 8 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: Full speed or root hub ports: 8 rev: 1.1
    speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900
  Device-1: 2-8:2 info: Alcor Micro 8-in-1 Media Card Reader
    type: Mass Storage driver: usb-storage interfaces: 1 rev: 1.1
    speed: 12 Mb/s power: 100mA chip-ID: 058f:9360 class-ID: 0806
    serial: <filter>
Sensors:
  System Temperatures: cpu: 48.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: apt: 1575 lib: 747
  Active apt repos in: /etc/apt/sources.list.d/antix.list
    1: deb http://mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye bullseye main nosystemd nonfree
  Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list
    1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://ftp.us.debian.org/debian/ bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://ftp.us.debian.org/debian/ bullseye main contrib non-free
    2: deb http://security.debian.org/ bullseye-security main contrib non-free
  No active apt repos in: /etc/apt/sources.list.d/various.list
Processes:
  CPU top: 5 of 130
  1: cpu: 29.6% command: firefox-esr pid: 7532 mem: 521.2 MiB (19.0%)
  2: cpu: 11.9% command: firefox-esr pid: 7674 mem: 202.5 MiB (7.3%)
  3: cpu: 4.0% command: xorg pid: 6399 mem: 97.0 MiB (3.5%)
  4: cpu: 3.1% command: sudo pid: 10803 mem: 4.81 MiB (0.1%)
  5: cpu: 1.7% command: firefox-esr pid: 7651 mem: 168.7 MiB (6.1%)
  Memory top: 5 of 130
  1: mem: 521.2 MiB (19.0%) command: firefox-esr pid: 7532 cpu: 29.6%
  2: mem: 202.5 MiB (7.3%) command: firefox-esr pid: 7674 cpu: 11.9%
  3: mem: 168.7 MiB (6.1%) command: firefox-esr pid: 7651 cpu: 1.7%
  4: mem: 114.4 MiB (4.1%) command: firefox-esr pid: 7607 cpu: 1.1%
  5: mem: 97.0 MiB (3.5%) command: xorg pid: 6399 cpu: 4.0%
Info:
  Processes: 130 Uptime: 45m wakeups: 1 Init: SysVinit v: 2.96 runlevel: 5
  default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo)
  v: 5.1.4 running-in: roxterm inxi: 3.3.19

This Acer Aspire 3800 Desktop PC used to be the wifes system.
USB boot does not work anymore.
Even with PLOP.
So got me -dvrw disc because my burner on another computer is picky.
sudo apt update
sudo apt dist-upgrade
sudo sensors detect
sudo dpkg-reconfigure locales

Already done. Been fighting this bios and computer all day to get a operating system going on here. Large hardrive in here so I fought it tooth and nail. Since hardware was not cooperating.

$ sudo parted -l
Model: ATA ST2000DM001-1CH1 (scsi)
Disk /dev/sda: 2000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags: 

Number  Start   End     Size    Type      File system     Flags
 1      1049kB  41.9GB  41.9GB  primary   linux-swap(v1)
 2      41.9GB  216GB   174GB   primary   ext4            boot
 4      216GB   2000GB  1784GB  extended
 5      216GB   1108GB  892GB   logical   ext3
 6      1108GB  2000GB  892GB   logical   ext4

Edit: forgot screenshot

Sometimes I drive a crooked road to get my mind straight.
Not all who Wander are Lost.
I'm not outa place. I'm from outer space.

Linux Registered User # 475019
How to Search for AntiX solutions to your problems

October 6, 2022 at 7:37 pm #90308

Topic: LibreOffice Writer bug – crashes when leaving full screen print preview

in forum Software

Member

scruffyeagle

I’ve got a bug happening, in Libre Office Writer. I’m not sure how long this bug has existed, because there was a long stretch of time when I didn’t use the full screen mode of print preview. But, I’ve been using it again now, and there’s a serious BUG in it.

The problem is that the LO Writer program is incapable of exiting full screen mode of print preview without crashing. This has been a nuisance, forcing me to re-open whatever document file I was working with – but last night it was an extra step worse. You see, I use VeraCrypt for data storage on an external drive – and when I wanted to dismount the partition, it couldn’t do it. It claimed there was still a file open, although there was nothing showing in the task bar. Finally, I just backed up the partition which wouldn’t dismount, and then shut down the machine without finishing proper dismount first. Starting up today, I discovered that LOW wanted to recover the file which had crashed last night. I let it do so, then closed the file properly.

I went to the LO website, and discovered that the current stable version is v7.3.6. By contrast, the version being served from the repo is v7.0.4.2. I’d considered filing a bug report w/ LO, but discovering that the repo version was so far behind, I concluded they’d probably just tell me to upgrade to the current version before complaining about a bug.

One possible solution to my problem, would be to uninstall the repo version, then download & install the current stable version from the website in its place. That might fix the problem… But,I’m cautious of doing that, thinking that perhaps the repo version has been tweaked in some manner to fit antiX – and perhaps losing those tweaks could cause new problems.

Another possible solution, given that the current installation is antiX v19.4, would be for me to set up an antiX v21 installation using some of the unused space on this machine’s internal HD. (It’s got enough empty space for 2 or 3 such installations…) But, that would be a pain in the you-know-what, going through the rigamarole & shennanigans of setting up another new OS. It seems like it would be much easier, to simply fix the issue that’s going wrong.

So, I’m seeking advice here in the forum, re. what’s the best course of action for me to solve this problem. Thanks in advance, for any helpful comments.

Here’s the output of inxi -Fxxxrz
—————————

System:
Kernel: 4.9.0-264-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc
v: 8.3.0 Desktop: IceWM v: 3.0.0 vt: 7 dm: SLiM v: 1.3.6
Distro: antiX-19.4_x64-full Grup Yorum 20 May 2021
base: Debian GNU/Linux 10 (buster)
Machine:
Type: Portable System: Dell product: Latitude E6400 v: N/A
serial: <superuser required> Chassis: type: 8 serial: <superuser required>
Mobo: Dell model: 0U692R serial: <superuser required> BIOS: Dell v: A34
date: 06/04/2013
Battery:
ID-1: BAT0 charge: 76.4 Wh (102.0%) condition: 74.9/76.4 Wh (98.1%)
volts: 12.2 min: 11.1 model: Panasonic DELL FU44196 type: Li-ion
serial: <filter> status: full
CPU:
Info: dual core model: Intel Core2 Duo P8600 bits: 64 type: MCP
smt: <unsupported> arch: Penryn Yorkfield rev: A cache: L1: 128 KiB
L2: 3 MiB
Speed (MHz): avg: 800 min/max: 800/2401 boost: enabled cores: 1: 800
2: 800 bogomips: 9576
Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
Graphics:
Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Dell
driver: i915 v: kernel arch: Gen5 ports: active: LVDS-1
empty: DP-1, DP-2, DP-3, HDMI-A-1, HDMI-A-2, VGA-1 bus-ID: 00:02.0
chip-ID: 8086:2a42 class-ID: 0300
Display: x11 server: X.Org v: 1.20.4 driver: X: loaded: intel gpu: i915
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1280×800 s-dpi: 96 s-size: 338x211mm (13.31×8.31″)
s-diag: 398mm (15.69″)
Monitor-1: LVDS-1 mapped: LVDS1 model: Seiko Epson 0x5441 res: 1280×800
hz: 60 dpi: 107 size: 303x190mm (11.93×7.48″) diag: 358mm (14.1″)
modes: 1280×800
OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express v: 2.1 Mesa 18.3.6
direct render: Yes
Audio:
Device-1: Intel 82801I HD Audio vendor: Dell driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403
Sound Server-1: ALSA v: k4.9.0-264-antix.1-amd64-smp running: yes
Network:
Device-1: Intel 82567LM Gigabit Network vendor: Dell driver: e1000e
v: 3.2.6-k port: efe0 bus-ID: 00:19.0 chip-ID: 8086:10f5 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel WiFi Link 5100 driver: iwlwifi v: kernel bus-ID: 0c:00.0
chip-ID: 8086:4232 class-ID: 0280
IF: wlan0 state: down mac: <filter>
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
v: 3.0 port: 6ea0 bus-ID: 00:1f.2 chip-ID: 8086:282a rev: N/A
class-ID: 0104
Drives:
Local Storage: total: 1.14 TiB used: 288.77 GiB (24.8%)
ID-1: /dev/sda vendor: Toshiba model: MK2561GSYN size: 232.89 GiB
speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: 0C scheme: MBR
ID-2: /dev/sdb type: USB vendor: Western Digital
model: WD My Passport 0748 size: 931.48 GiB type: N/A serial: <filter>
rev: 1019 scheme: MBR
Partition:
ID-1: / size: 28.71 GiB used: 7.42 GiB (25.8%) fs: ext4 dev: /dev/sda5
Swap:
ID-1: swap-1 type: partition size: 9.77 GiB used: 0 KiB (0.0%) priority: -1
dev: /dev/sda3
Sensors:
System Temperatures: cpu: 39.0 C mobo: N/A sodimm: SODIMM C
Fan Speeds (RPM): cpu: 3010
Repos:
Packages: apt: 2141
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/antix/buster/ buster main nonfree nosystemd
Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
1: deb http://deb.debian.org/debian/ buster-backports non-free contrib main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.us.debian.org/debian/ buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.us.debian.org/debian/ buster main contrib non-free
2: deb http://security.debian.org/ buster/updates main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.list
Info:
Processes: 216 Uptime: 1h 43m wakeups: 5 Memory: 3.82 GiB
used: 1.73 GiB (45.5%) Init: SysVinit v: 2.93 runlevel: 5 default: 5
Compilers: gcc: 8.3.0 alt: 8 Shell: Bash v: 5.0.3 running-in: roxterm
inxi: 3.3.19

September 26, 2022 at 1:48 pm #89822

Topic: Kernel update to 4.19.0-256-antix.1-686-smp-pae successfully on antiX 19.3

in forum antiX-19 “Marielle Franco, Hannie Schaft, Manolis Glezos, Grup Yorum, Wobblies”

Member

Robin

System runs rock stable as before, after this kernel update. Many thanks, anticapitalista!
This is a frugal-persist install, most recently apt-upgraded before I did the kernel update.
You wouldn’t believe this notebook is mostly 20 years old now (BIOS was flashed with an update two years after production date) when you see antiX running on it. It’s still in use for everydays work and multimedia up to 720p (3000kb/s).

Here the details:

System:
  Kernel: 4.19.0-256-antix.1-686-smp-pae arch: i686 bits: 32 compiler: gcc v: 8.3.0
    parameters: vga=0x0317 gfxsave frugal_persist lang=de_DE quiet splash=v disable=lx mount=all
  Desktop: IceWM v: 2.9.9 vt: 7 dm: SLiM v: 1.3.6
    Distro: antiX-19.3_386-full Manolis Glezos 15 October 2020 base: Debian GNU/Linux 10 (buster)
Machine:
  Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: <superuser required>
    Chassis: No Enclosure type: 1 serial: <superuser required>
  Mobo: Notebook model: RIM2000 serial: <superuser required> BIOS: Phoenix v: RIM00F0A
    date: 05/27/2005
Battery:
  ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) volts: 16.6 min: 14.8
    model: ARIMA LI4403A type: Unknown serial: <filter> status: full
Memory:
  RAM: total: 1.96 GiB used: 1.18 GiB (60.2%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots:
  Permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Pentium M bits: 32 arch: M Dothan built: 2003-05 process: Intel 90nm
    family: 6 model-id: 0xD (13) stepping: 8 microcode: 0x20
  Topology: cpus: 1x cores: 1 smt: <unsupported> cache: 2 MiB note: check
  Speed (MHz): 1333 min/max: 800/1733 scaling: driver: acpi-cpufreq governor: ondemand core:
    1: 1333 bogomips: 2659
  Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae
    pbe pge pse pti sep ss sse sse2 tm tm2 tsc vme
  Vulnerabilities:
  Type: itlb_multihit status: KVM: Vulnerable
  Type: l1tf mitigation: PTE Inversion
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2
    mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: nvidia v: 304.137
    alternate: nvidiafb,nouveau non-free: series: 304.xx status: legacy (EOL) last: release: 304.137
    kernel: 4.13 xorg: 1.19 arch: Curie process: 90-130nm built: 2003-13 pcie: gen: 1
    speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:0148 class-ID: 0300
  Display: x11 server: X.Org v: 1.19.2 driver: X: loaded: nvidia unloaded: modesetting
    failed: fbdev,nouveau,vesa alternate: nv gpu: nvidia display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 2464x900 s-dpi: 98 s-size: 639x231mm (25.16x9.09") s-diag: 679mm (26.75")
  Monitor-1: VGA-1 pos: right res: 1024x768 hz: 60 size: N/A modes: N/A
  Monitor-2: VGA-2 pos: primary,left res: 1440x900 hz: 60 dpi: 100 size: 367x230mm (14.45x9.06")
    diag: 433mm (17.05") modes: N/A
  OpenGL: renderer: GeForce Go 6600/PCIe/SSE2 v: 2.1.2 NVIDIA 304.137 direct render: Yes
Audio:
  Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403
  Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation
    driver: saa7134 v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480
  Sound Server-1: ALSA v: k4.19.0-256-antix.1-686-smp-pae running: yes
Network:
  Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq
    modules: wl bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280
  IF: eth1 state: up mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> scope: link
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 151.75 GiB used: 81.51 GiB (53.7%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A size: 93.16 GiB block-size:
    physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 3.02 scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk size: 58.59 GiB
    block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 8.01 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B
    dev-links: cdrom,cdrw,dvd,dvdrw
  Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running
Partition:
  ID-1: /live/boot-dev raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 5.16 GiB (66.2%) fs: ext4
    dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal uuid: 19eaea0e-493b-4007-8eff-f14aca40363f
  ID-2: /media/LIVE-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 4.2 MiB (8.7%) fs: vfat
    dev: /dev/sdb2 maj-min: 8:18 label: LIVE-UEFI uuid: D958-C6DA
  ID-3: /media/Live-usb raw-size: 58.54 GiB size: 57.54 GiB (98.29%) used: 6.54 GiB (11.4%)
    fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: Live-usb uuid: 1641dae7-0ebc-416d-be5e-b9edd9a4a6ab
  ID-4: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) used: 36.96 GiB (88.8%)
    fs: ext3 dev: /dev/sda7 maj-min: 8:7 label: /daten3 uuid: c1bc867a-ec28-436d-831b-e47f334471ce
  ID-5: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) fs: ext3
    dev: /dev/sda8 maj-min: 8:8 label: /daten4 uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da
  ID-6: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) fs: ext3
    dev: /dev/sda5 maj-min: 8:5 label: /home uuid: 94021be3-c160-4166-a151-92ad72b26f9a
  ID-7: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 7.97 GiB (81.8%) fs: ext4
    dev: /dev/sda6 maj-min: 8:6 label: antiX uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec
  ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) fs: ext4
    dev: /dev/sda10 maj-min: 8:10 label: N/A uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d
Swap:
  Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100)
  ID-1: swap-1 type: partition size: 2.16 GiB used: 264 KiB (0.0%) priority: -2 dev: /dev/sda9
    maj-min: 8:9 label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14
Unmounted:
  ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: <superuser required> label: N/A uuid: N/A
USB:
  Hub-1: 1-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage
    interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806
    serial: <filter>
  Hub-2: 2-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
  Device-1: 2-1:2 info: Pixart Imaging type: Mouse,Keyboard driver: hid-generic,usbhid
    interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 093a:2533 class-ID: 0300
  Hub-3: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
  Hub-4: 4-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
Sensors:
  System Temperatures: cpu: N/A mobo: N/A gpu: nvidia temp: 61 C
  Fan Speeds (RPM): N/A
Repos:
  Packages: apt: 1896 lib: 861
  Active apt repos in: /etc/apt/sources.list.d/antix.list
    1: deb https: //mirror.eu.oneandone.net/linux/distributions/mx/packages/antix/buster buster main nonfree nosystemd
  Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
    1: deb http: //deb.debian.org/debian buster-backports main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http: //ftp.de.debian.org/debian/ buster-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http: //ftp.de.debian.org/debian/ buster main contrib non-free
    2: deb http: //security.debian.org/ buster/updates main contrib non-free
  No active apt repos in: /etc/apt/sources.list.d/onion.list
  No active apt repos in: /etc/apt/sources.list.d/various.list
Processes:
  CPU top: 5 of 144
  1: cpu: 27.0% command: yad pid: 18543 mem: 23.3 MiB (1.1%)
  2: cpu: 19.7% command: firefox-bin pid: 4897 mem: 172.9 MiB (8.6%)
  3: cpu: 15.4% command: firefox pid: 4678 mem: 540.6 MiB (26.9%)
  4: cpu: 4.2% command: xorg pid: 3618 mem: 76.2 MiB (3.7%)
  5: cpu: 1.8% command: firefox-bin pid: 14169 mem: 143.1 MiB (7.1%)
  Memory top: 5 of 144
  1: mem: 540.6 MiB (26.9%) command: firefox pid: 4678 cpu: 15.4%
  2: mem: 172.9 MiB (8.6%) command: firefox-bin pid: 4897 cpu: 19.7%
  3: mem: 143.1 MiB (7.1%) command: firefox-bin pid: 14169 cpu: 1.8%
  4: mem: 115.0 MiB (5.7%) command: firefox-bin pid: 4833 cpu: 0.2%
  5: mem: 114.5 MiB (5.7%) command: firefox-bin pid: 4904 cpu: 0.0%
Info:
  Processes: 144 Uptime: 1h 26m wakeups: 2 Init: SysVinit v: 2.93 runlevel: 5 default: 5
  tool: service Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.19

Single issues when installing the new kernel was:

ERROR: update-menus [17874] Script /etc/menu-methods/icewm-common returned error status 1
ERROR: File /var/lib/dkms/virtualbox-guest/6.1.14/source/dkms.conf does not exist.

But this doesn’t keep it from running fine. Virtualbox 6.1.x can’t be installed on a 32bit CPU anyway. And I don’t see what the error in menu-methods could have caused by now. No visible effect as far I can see. So I don’t mind.

Windows is like a submarine. Open a window and serious problems will start.

September 21, 2022 at 8:06 pm #89479

Topic: Kernel 5.10.57 crashes on older INTEL I5 hardware

in forum antiX-21/22 “Grup Yorum”

Member

dirkd

I’m not asking for any help on this issue, but I thought it could be helpful to just signal it.

I installed Antix21 on an ASUS Z87 motherboard with an I5 processor with integrated graphics (full details on the system below). I was surprised to find that the computer crashed when displaying a webm video in mpv or celluloid, since the hardware is between 8 and 10 years old. The system freezes after 10 seconds or so, or immediately on resizing the video window in IceWM. Only way to recover is rebooting the computer. After uninstalling the 5.10 kernel the system works just fine in every respect on the 4.9.0 kernel.

Just one small annoyance: the system finds two sound devices (hda-intel-hdmi and hda-intel-pch. It only works with the second one but seems to produce a somewhat lower quality sound then the same hardware under Windows 10. This may be in my imagination only however since I can’t hear them next to each other.


System:    Kernel: 4.9.0-279-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.9.0-279-antix.1-amd64-smp 
           root=UUID=10c577d9-2e0e-4836-9754-877cfba66c69 ro quiet 
           Desktop: IceWM 2.8.0 vt: 7 dm: N/A Distro: antiX-21_x64-full Grup Yorum 31 October 2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Desktop System: ASUS product: All Series v: N/A serial: <filter> 
           Mobo: ASUSTeK model: Z87-PRO v: Rev 1.xx serial: <filter> UEFI: American Megatrends 
           v: 2103 date: 08/18/2014 
Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 7.49 GiB used: 837.9 MiB (10.9%) 
           RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. 
CPU:       Info: Quad Core model: Intel Core i5-4670K bits: 64 type: MCP arch: Haswell family: 6 
           model-id: 3C (60) stepping: 3 microcode: 28 cache: L2: 6 MiB bogomips: 33008 
           Speed: 3300 MHz min/max: 800/3300 MHz Core speeds (MHz): 1: 3300 2: 3300 3: 3300 
           4: 3300 
           Flags: abm acpi aes aperfmperf apic arat arch_perfmon avx avx2 bmi1 bmi2 bts clflush 
           cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept erms est f16c 
           flexpriority flush_l1d fma fpu fsgsbase fxsr ht ibpb ibrs invpcid invpcid_single kaiser 
           lahf_lm lm mca mce md_clear mmx monitor movbe msr mtrr nonstop_tsc nopl nx pae pat pbe 
           pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pts rdrand rdtscp 
           rep_good sdbg sep smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 
           tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid xsave xsaveopt xtopology 
           xtpr 
           Vulnerabilities: Type: itlb_multihit status: KVM: Vulnerable 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds mitigation: Clear CPU buffers; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: 
           disabled, RSB filling 
           Type: srbds mitigation: Microcode 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics 
           vendor: ASUSTeK driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:0412 
           class-ID: 0300 
           Display: x11 server: X.Org 1.20.11 driver: loaded: modesetting unloaded: fbdev,vesa 
           display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1280x1024 s-dpi: 96 s-size: 338x270mm (13.3x10.6") 
           s-diag: 433mm (17") 
           Monitor-1: VGA-1 res: 1280x1024 hz: 60 dpi: 86 size: 376x301mm (14.8x11.9") 
           diag: 482mm (19") 
           OpenGL: renderer: Mesa DRI Intel HD Graphics 4600 (HSW GT2) v: 4.5 Mesa 20.3.5 
           compat-v: 3.0 direct render: Yes 
Audio:     Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: ASUSTeK 
           driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:0c0c class-ID: 0403 
           Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: ASUSTeK 
           driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20 class-ID: 0403 
           Sound Server-1: ALSA v: k4.9.0-279-antix.1-amd64-smp running: yes 
Network:   Device-1: Intel Ethernet I217-V vendor: ASUSTeK driver: e1000e v: 3.2.6-k port: f080 
           bus-ID: 00:19.0 chip-ID: 8086:153b class-ID: 0200 
           IF: eth0 state: down mac: <filter> 
           Device-2: Qualcomm Atheros AR9462 Wireless Network Adapter vendor: ASUSTeK 
           driver: ath9k v: kernel modules: wl port: f040 bus-ID: 03:00.0 chip-ID: 168c:0034 
           class-ID: 0280 
           IF: wlan0 state: up mac: <filter> 
           IP v4: <filter> scope: global broadcast: <filter> 
           IP v6: <filter> type: dynamic mngtmpaddr scope: global 
           IP v6: <filter> type: dynamic mngtmpaddr scope: global 
           IP v6: <filter> scope: link 
           WAN IP: <filter> 
Bluetooth: Device-1: ASUSTek type: USB driver: btusb v: 0.8 bus-ID: 3-4:6 chip-ID: 0b05:17d0 
           class-ID: e001 
           Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: running rfk-block: 
           hardware: no software: yes address: <filter> 
           Info: acl-mtu: 1022:8 sco-mtu: 183:5 link-policy: rswitch hold sniff 
           link-mode: slave accept 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 596.17 GiB used: 4.42 GiB (0.7%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD6401AALS-00E8B0 
           size: 596.17 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD 
           rpm: 7200 serial: <filter> rev: 0K05 scheme: GPT 
           Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GH15F rev: EG00 
           dev-links: cdrom,cdrw,dvd,dvdrw 
           Features: speed: 40 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram 
           state: running 
Partition: ID-1: / raw-size: 97.66 GiB size: 95.56 GiB (97.86%) used: 4.29 GiB (4.5%) fs: ext4 
           dev: /dev/sda6 maj-min: 8:6 label: antiX21 uuid: 10c577d9-2e0e-4836-9754-877cfba66c69 
           ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 25.2 MiB (26.3%) fs: vfat 
           dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 5E6D-26DC 
           ID-3: /media/Data raw-size: 400.39 GiB size: 400.39 GiB (100.00%) 
           used: 104.7 MiB (0.0%) fs: ntfs dev: /dev/sda4 maj-min: 8:4 label: Data 
           uuid: 9AE2C73EE2C71CFF 
Swap:      Alert: No swap data was found. 
Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 16 MiB fs: <superuser required> label: N/A uuid: N/A 
           ID-2: /dev/sda3 maj-min: 8:3 size: 97.51 GiB fs: ntfs label: N/A uuid: 0E1A6E6E1A6E532F 
           ID-3: /dev/sda5 maj-min: 8:5 size: 510 MiB fs: ntfs label: N/A uuid: 1440B7D840B7BF34 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 8087:8008 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 8087:8000 class-ID: 0900 
           Hub-5: 3-0:1 info: Full speed (or root) Hub ports: 14 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-6: 3-3:2 info: ASMedia ASM1074 High-Speed hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           power: 100mA chip-ID: 174c:2074 class-ID: 0900 
           Device-1: 3-4:6 info: ASUSTek type: Bluetooth driver: btusb interfaces: 2 rev: 1.1 
           speed: 12 Mb/s power: 100mA chip-ID: 0b05:17d0 class-ID: e001 
           Device-2: 3-13:4 info: Logitech M-U0004 810-001317 [B110 Optical USB Mouse] type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 98mA 
           chip-ID: 046d:c05b class-ID: 0301 
           Device-3: 3-14:5 info: Holtek USB-HID Keyboard type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 4 rev: 1.1 speed: 12 Mb/s power: 500mA 
           chip-ID: 04d9:a231 class-ID: 0300 
           Hub-7: 4-0:1 info: Full speed (or root) Hub ports: 6 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Hub-8: 4-3:2 info: ASMedia ASM1074 SuperSpeed hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           power: 8mA chip-ID: 174c:3074 class-ID: 0900 
Sensors:   System Temperatures: cpu: 29.8 C mobo: 27.8 C 
           Fan Speeds (RPM): cpu: 0 
Repos:     Packages: apt: 1599 lib: 767 
           Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http: //mirror.tiguinet.net/mx/packages/antix/bullseye bullseye main nosystemd nonfree
           Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 
           1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http: //ftp.be.debian.org/debian/ bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http: //ftp.be.debian.org/debian/ bullseye main contrib non-free
           2: deb http: //security.debian.org/ bullseye-security main contrib non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 of 180 
           1: cpu: 5.7% command: firefox-esr pid: 2606 mem: 270.1 MiB (3.5%) 
           2: cpu: 3.9% command: firefox-esr pid: 2686 mem: 238.1 MiB (3.1%) 
           3: cpu: 1.1% command: xorg pid: 2004 mem: 75.8 MiB (0.9%) 
           4: cpu: 0.3% command: gtkdialog pid: 3509 mem: 29.7 MiB (0.3%) 
           5: cpu: 0.1% command: init pid: 1 mem: 1.97 MiB (0.0%) 
           Memory top: 5 of 180 
           1: mem: 270.1 MiB (3.5%) command: firefox-esr pid: 2606 cpu: 5.7% 
           2: mem: 238.1 MiB (3.1%) command: firefox-esr pid: 2686 cpu: 3.9% 
           3: mem: 133.2 MiB (1.7%) command: firefox-esr pid: 2813 cpu: 0.1% 
           4: mem: 103.5 MiB (1.3%) command: firefox-esr pid: 2761 cpu: 0.1% 
           5: mem: 75.8 MiB (0.9%) command: xorg pid: 2004 cpu: 1.1% 
Info:      Processes: 180 Uptime: 5m wakeups: 1 Init: SysVinit v: 2.96 runlevel: 5 default: 5 
           tool: service Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release 
           inxi: 3.3.06

September 14, 2022 at 12:43 am #88849

In reply to: la.mxrepo connecting via osuosl.org ??

Member

stevesr0

Hi dolphin_oracle,

Thanks for reply.

I have seen this message on only one occasion. Have not seen any evidence that this was some kind of malware.

Yes, I checked that the osuosl site is another antiX repository site.

I have abstracted the active repositories and sites below.

List of active repositories

antix.list
deb http://la.mxrepo.com/antix/sid sid main nosystemd nonfree

antix.list.dpkg-old
deb http://la.mxrepo.com/antix/sid/ sid nonfree nosystemd main

debian.list
deb http://ftp.us.debian.org/debian/ unstable main contrib non-free

debian.list.dpkg-old
deb http://ftp.us.debian.org/debian/ unstable non-free contrib main

Other sites WITHOUT ACTIVE REPOSITORIES       

various.list

various.list.dpkg-dist
      
onion.list

onion.list.dpkg-old

debian-stable-updates.list  

bullseye-backports.list

Appreciate your thoughts, although it seems to be harmless. I thought someone else might have had similar experiences.

stevesr0

September 13, 2022 at 10:35 pm #88833

In reply to: What are you “here” with today?

Moderator

Brian Masinick

The FOLLOWING COPY of my previous post is PROOF that our 5.10 series of kernels USED to work GREAT on my Dell Inspiron 5558 laptop, just as I thought:

Brian Masinick wrote:

Here’s my FULL listing of my currently running instance of antiX, as Linus Torvalds would say, “Just For Fun”:

inxi -zv8
System:
  Kernel: 5.10.88-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc
    v: 10.2.1 parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.88-antix.1-amd64-smp
    root=UUID=d6479cf5-4d89-46cd-8905-1b1f7fed2511 ro audit=0
    intel_pstate=disable quiet vga=895 selinux=0
  Desktop: IceWM v: 2.9.7 vt: 7 dm: slimski v: 1.5.0
    Distro: antiX-21-runit_x64-base Grup Yorum 30 October 2021
    base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: Laptop System: Dell product: Inspiron 5558 v: 01
    serial: <superuser required> Chassis: type: 9 serial: <superuser required>
  Mobo: Dell model: 086DKN v: A00 serial: <superuser required> UEFI: Dell
    v: A04 date: 08/06/2015
Battery:
  ID-1: BAT0 charge: 30.1 Wh (100.0%) condition: 30.1/41.4 Wh (72.6%)
    volts: 16.5 min: 14.8 model: Samsung SDI DELL 07G07587587 type: Li-ion
    serial: <filter> status: full
Memory:
  RAM: total: 7.68 GiB used: 1.07 GiB (14.0%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
PCI Slots:
  Permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Core i7-5500U bits: 64 type: MT MCP arch: Broadwell
    gen: core 5 built: 2015-18 process: Intel 14nm family: 6
    model-id: 0x3D (61) stepping: 4 microcode: 0x2F
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
    L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
    L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 2587 high: 2832 min/max: 500/2401 boost: enabled
    scaling: driver: acpi-cpufreq governor: performance cores: 1: 2832 2: 2557
    3: 2418 4: 2544 bogomips: 19155
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon
    avx avx2 bmi1 bmi2 bts clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8
    de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
    flush_l1d fma fpu fsgsbase fxsr ht ibpb ibrs ida intel_pt invpcid
    invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe msr mtrr
    nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln
    pni popcnt pse pse36 pti pts rdrand rdseed rdtscp rep_good sdbg sep smap
    smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow
    tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xsave xsaveopt
    xtopology xtpr
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf
    mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
    IBRS_FW, STIBP: conditional, RSB filling
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel HD Graphics 5500 vendor: Dell driver: i915 v: kernel
    arch: Gen8 process: Intel 14nm built: 2014-15 ports: active: eDP-1
    empty: HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:1616 class-ID: 0300
  Device-2: NVIDIA GK208BM [GeForce 920M] vendor: Dell driver: nvidiafb
    v: kernel alternate: nouveau non-free: series: 470.xx+
    status: legacy-active (EOL~2023/24) arch: Kepler code: GKxxx
    process: TSMC 28nm built: 2012-18 pcie: gen: 2 speed: 5 GT/s lanes: 4
    link-max: gen: 3 speed: 8 GT/s lanes: 8 bus-ID: 08:00.0
    chip-ID: 10de:1299 class-ID: 0302
  Device-3: Suyin Integrated_Webcam_HD type: USB driver: uvcvideo
    bus-ID: 2-5:3 chip-ID: 064e:920b class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: modesetting
    unloaded: fbdev,vesa gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99")
    s-diag: 414mm (16.31")
  Monitor-1: eDP-1 model: LG Display 0x0484 built: 2014 res: 1366x768
    hz: 60 dpi: 101 gamma: 1.2 chroma: red: x: 0.580 y: 0.345 green: x: 0.337
    y: 0.573 blue: x: 0.157 y: 0.118 white: x: 0.314 y: 0.329
    size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9
    modes: 1366x768
  EDID-Warnings: 1: parse_edid: unknown flag 0
  OpenGL: renderer: Mesa Intel HD Graphics 5500 (BDW GT2)
    v: 4.6 Mesa 20.3.5 direct render: Yes
Audio:
  Device-1: Intel Broadwell-U Audio vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 00:03.0 chip-ID: 8086:160c class-ID: 0403
  Device-2: Intel Wildcat Point-LP High Definition Audio vendor: Dell
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9ca0
    class-ID: 0403
  Device-3: NVIDIA GK208 HDMI/DP Audio driver: snd_hda_intel v: kernel
    pcie: gen: 2 speed: 5 GT/s lanes: 4 link-max: gen: 3 speed: 8 GT/s lanes: 8
    bus-ID: 08:00.1 chip-ID: 10de:0e0f class-ID: 0403
  Sound Server-1: ALSA v: k5.10.88-antix.1-amd64-smp running: yes
Network:
  Device-1: Intel Wireless 3160 driver: iwlwifi v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 06:00.0 chip-ID: 8086:08b3 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> scope: link
  Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000
    bus-ID: 07:00.0 chip-ID: 10ec:8136 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
    bus-ID: 2-6:4 chip-ID: 8087:07dc class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found
    rfk-block: hardware: no software: yes address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 447.13 GiB used: 27.03 GiB (6.0%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37480G
    size: 447.13 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 0102 scheme: GPT
  Optical-1: /dev/sr0 vendor: PLDS model: DVD+-RW DU-8A5LH rev: DD11
    dev-links: cdrom,cdrw,dvd,dvdrw
  Features: speed: 24 multisession: yes audio: yes dvd: yes
    rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
  ID-1: / raw-size: 80 GiB size: 78.19 GiB (97.74%) used: 27.03 GiB (34.6%)
    fs: ext4 dev: /dev/sda6 maj-min: 8:6 label: antiX-Persist
    uuid: d6479cf5-4d89-46cd-8905-1b1f7fed2511
  ID-2: /boot/efi raw-size: 100 MiB size: 98.4 MiB (98.42%)
    used: 2.2 MiB (2.3%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: BOOT
    uuid: 31E2-D091
Swap:
  Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100)
  ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/sda2 maj-min: 8:2 label: N/A
    uuid: 84f71f56-aca6-4e58-823b-e74e372f3eda
Unmounted:
  ID-1: /dev/sda3 maj-min: 8:3 size: 80 GiB fs: ext4 label: rootantiX19
    uuid: 811c81e8-827e-4ec6-ac44-31dd2beb83ed
  ID-2: /dev/sda4 maj-min: 8:4 size: 80 GiB fs: ext4 label: N/A
    uuid: b3591fa8-69d4-4973-a7f6-6029d02c3c89
  ID-3: /dev/sda5 maj-min: 8:5 size: 80 GiB fs: ext4 label: endeavouros
    uuid: 57e534da-374b-450d-aec5-0d98712d8808
  ID-4: /dev/sda7 maj-min: 8:7 size: 119.03 GiB fs: ext4 label: rootMX21
    uuid: 439b56db-fe49-425d-b0d2-fd0d56252b6c
USB:
  Hub-1: 1-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Intel Integrated Hub ports: 8 rev: 2.0 speed: 480 Mb/s
    chip-ID: 8087:8001 class-ID: 0900
  Hub-3: 2-0:1 info: Hi-speed hub with single TT ports: 11 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 2-3:2 info: KYE Systems (Mouse Systems) Trackbar Emotion
    type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0
    speed: 1.5 Mb/s power: 100mA chip-ID: 0458:0007 class-ID: 0301
  Device-2: 2-5:3 info: Suyin Integrated_Webcam_HD type: Video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
    chip-ID: 064e:920b class-ID: 0e02 serial: <filter>
  Device-3: 2-6:4 info: Intel Bluetooth wireless interface type: Bluetooth
    driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA
    chip-ID: 8087:07dc class-ID: e001
  Device-4: 2-8:5 info: Realtek RTS5129 Card Reader Controller
    type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc
    interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:0129
    class-ID: ff00 serial: <filter>
  Hub-4: 3-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 55.0 C mobo: N/A sodimm: SODIMM C
  Fan Speeds (RPM): cpu: 2200
Repos:
  Packages: apt: 1276 lib: 602
  Active apt repos in: /etc/apt/sources.list.d/antix.list
    1: deb http://mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye bullseye main nosystemd nonfree
  Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list
    1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://ftp.us.debian.org/debian/ bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://ftp.de.debian.org/debian/ bullseye main contrib non-free
    2: deb http://security.debian.org/ bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/liquorix.list
    1: deb https://liquorix.net/debian bullseye main
    2: deb-src https://liquorix.net/debian bullseye main
  Active apt repos in: /etc/apt/sources.list.d/opera-stable.list
    1: deb https://deb.opera.com/opera-stable/ stable non-free
  No active apt repos in: /etc/apt/sources.list.d/various.list
Processes:
  CPU top: 5 of 187
  1: cpu: 21.7% command: chrome pid: 25153 mem: 173.0 MiB (2.1%)
  2: cpu: 2.6% command: chrome pid: 12793 mem: 174.0 MiB (2.2%)
  3: cpu: 2.5% command: google-chrome-stable pid: 12752
    mem: 291.9 MiB (3.7%)
  4: cpu: 1.0% command: chrome pid: 12794 mem: 136.9 MiB (1.7%)
  5: cpu: 0.9% command: xorg pid: 2106 mem: 71.7 MiB (0.9%)
  Memory top: 5 of 187
  1: mem: 291.9 MiB (3.7%) command: google-chrome-stable pid: 12752
    cpu: 2.5%
  2: mem: 174.0 MiB (2.2%) command: chrome pid: 12793 cpu: 2.6%
  3: mem: 173.0 MiB (2.1%) command: chrome pid: 25153 cpu: 21.7%
  4: mem: 169.7 MiB (2.1%) command: chrome pid: 24749 cpu: 0.5%
  5: mem: 136.9 MiB (1.7%) command: chrome pid: 12794 cpu: 1.0%
Info:
  Processes: 187 Uptime: 40m wakeups: 2 Init: runit v: N/A runlevel: 2
  tool: service Compilers: gcc: 10.2.1 alt: 10/9 Shell: Bash v: 5.1.4
  running-in: roxterm inxi: 3.3.19

--
Brian Masinick

September 11, 2022 at 5:11 am #88556

In reply to: testing 5.10 kernel

Member

silvioto

Exactly the same problem as before (freeze on the green screen at boot).
here’s my old post: https://www.antixforum.com/forums/topic/kernel-5-10-57-dont-boot-after-update/

System:
  Kernel: 4.9.0-279-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 10.2.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-4.9.0-279-antix.1-amd64-smp
    root=UUID=cd5f7794-611d-415a-b5a9-13f1a59e7a1e ro quiet
  Desktop: IceWM v: 2.9.9 vt: 7 dm: slimski v: 1.5.0
    Distro: antiX-21_x64-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: Desktop Mobo: ASUSTeK model: P5G41T-M LX v: Rev X.0x serial: <superuser required>
    BIOS: American Megatrends v: 0601 date: 05/11/2010
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.86 GiB used: 864 MiB (21.9%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots:
  Permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Pentium E5200 bits: 64 type: MCP arch: Penryn Yorkfield built: 2008
    process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 6 microcode: 0x60F
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
    L2: 2 MiB desc: 1x2 MiB
  Speed (MHz): avg: 1203 min/max: 1203/2500 scaling: driver: acpi-cpufreq governor: ondemand
    cores: 1: 1203 2: 1203 bogomips: 10002
  Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de ds_cpl
    dtes64 dtherm dts est fpu fxsr ht kaiser lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat
    pbe pdcm pebs pge pni pse pse36 rep_good sep ss sse sse2 ssse3 syscall tm tm2 tsc vme xtpr
  Vulnerabilities:
  Type: itlb_multihit status: KVM: Vulnerable
  Type: l1tf mitigation: PTE Inversion
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown mitigation: PTI
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GK208B [GeForce GT 730] vendor: ASUSTeK driver: nouveau v: kernel non-free:
    series: 470.xx+ status: legacy-active (EOL~2023/24) arch: Kepler code: GKxxx process: TSMC 28nm
    built: 2012-18 ports: active: DVI-D-1 empty: HDMI-A-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:1287
    class-ID: 0300
  Device-2: Creative WebCam Vista (VF0330) type: USB driver: ov519 bus-ID: 6-3:2
    chip-ID: 041e:405f class-ID: 0000
  Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: modesetting unloaded: fbdev,vesa
    gpu: nouveau display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 444x277mm (17.48x10.91") s-diag: 523mm (20.6")
  Monitor-1: DVI-D-1 model: Philips 220SW serial: <filter> built: 2008 res: 1680x1050 hz: 60
    dpi: 90 gamma: 1.2 chroma: red: x: 0.647 y: 0.337 green: x: 0.290 y: 0.604 blue: x: 0.145
    y: 0.071 white: x: 0.314 y: 0.329 size: 474x296mm (18.66x11.65") diag: 552mm (21.7")
    ratio: 16:10 modes: 1680x1050, 1600x1200, 1280x1024, 1440x900, 1152x864, 1024x768, 832x624,
    800x600, 640x480, 720x400
  OpenGL: renderer: NV106 v: 4.3 Mesa 20.3.5 direct render: Yes
Audio:
  Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: ASUSTeK driver: snd_hda_intel
    v: kernel bus-ID: 00:1b.0 chip-ID: 8086:27d8 class-ID: 0403
  Device-2: NVIDIA GK208 HDMI/DP Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
    bus-ID: 01:00.1 chip-ID: 10de:0e0f class-ID: 0403
  Sound Server-1: ALSA v: k4.9.0-279-antix.1-amd64-smp running: yes
Network:
  Device-1: Qualcomm Atheros AR8131 Gigabit Ethernet vendor: ASUSTeK driver: atl1c v: 1.0.1.1-NAPI
    port: ec00 bus-ID: 02:00.0 chip-ID: 1969:1063 class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> scope: link
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 763.85 GiB used: 140.67 GiB (18.4%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Maxtor model: STM3500320AS size: 465.76 GiB block-size:
    physical: 512 B logical: 512 B speed: <unknown> type: HDD rpm: 7200 serial: <filter> rev: MX1A
    scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST3320620AS size: 298.09 GiB block-size:
    physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: K scheme: MBR
  Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GH22NS50 rev: TN01
    dev-links: cdrom,cdrw,dvd,dvdrw
  Features: speed: 48 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram
    state: running
Partition:
  ID-1: / raw-size: 464.78 GiB size: 456.42 GiB (98.20%) used: 54.2 GiB (11.9%) fs: ext4
    dev: /dev/sda1 maj-min: 8:1 label: rootantiX21 uuid: cd5f7794-611d-415a-b5a9-13f1a59e7a1e
  ID-2: /media/storage raw-size: 219.97 GiB size: 219.97 GiB (100.00%) used: 53.4 GiB (24.3%)
    fs: ntfs dev: /dev/sdb1 maj-min: 8:17 label: storage uuid: 70986C2113066BBE
  ID-3: /media/windows raw-size: 78.12 GiB size: 78.12 GiB (100.00%) used: 33.07 GiB (42.3%)
    fs: ntfs dev: /dev/sdb2 maj-min: 8:18 label: windows uuid: 5E26A62B6F9429A6
Swap:
  Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100)
  ID-1: swap-1 type: partition size: 1000 MiB used: 0 KiB (0.0%) priority: -1 dev: /dev/sda2
    maj-min: 8:2 label: N/A uuid: ecbae670-ab9d-49cb-bd17-c9a3e6f508d5
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Full speed or root hub ports: 8 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
  Device-1: 2-1:2 info: Chicony Genius LuxeMate i200 Keyboard type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA
    chip-ID: 04f2:0402 class-ID: 0300
  Hub-3: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
  Device-1: 3-1:2 info: Logitech M-U0007 [Corded Mouse M500] type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 98mA chip-ID: 046d:c069
    class-ID: 0301
  Hub-4: 4-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
  Hub-5: 5-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
  Hub-6: 6-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 6-3:2 info: Creative WebCam Vista (VF0330) type: Video driver: ov519 interfaces: 1
    rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 041e:405f class-ID: 0000
  Hub-7: 7-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 34.0 C mobo: 38.0 C gpu: nouveau temp: 48.0 C
  Fan Speeds (RPM): cpu: 1074 case-1: 0
  Power: 12v: 12.51 5v: N/A 3.3v: 3.34 vbat: N/A gpu: nouveau mV: 912.00
Repos:
  Packages: apt: 1815 lib: 909
  Active apt repos in: /etc/apt/sources.list.d/antix.list
    1: deb http: //it.mxrepo.com/antix/bullseye/ bullseye main nosystemd nonfree
  Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list
    1: deb http: //deb.debian.org/debian/ bullseye-backports main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/celestia.list
    1: deb https: //celestia.space/packages/ buster main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http: //ftp.it.debian.org/debian/ bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http: //ftp.us.debian.org/debian/ bullseye main contrib non-free
    2: deb http: //security.debian.org/ bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/mkvtoolnix.list
    1: deb [signed-by=/usr/share/keyrings/gpg-pub-moritzbunkus.gpg] https: //mkvtoolnix.download/debian/ bullseye main
    2: deb-src [signed-by=/usr/share/keyrings/gpg-pub-moritzbunkus.gpg] https: //mkvtoolnix.download/debian/ bullseye main
  No active apt repos in: /etc/apt/sources.list.d/protonvpn-stable.list
  No active apt repos in: /etc/apt/sources.list.d/various.list
Processes:
  CPU top: 5 of 156
  1: cpu: 15.6% command: firefox-esr pid: 2305 mem: 181.7 MiB (4.5%)
  2: cpu: 13.9% command: firefox-esr pid: 2186 mem: 348.8 MiB (8.8%)
  3: cpu: 13.0% command: yad pid: 2529 mem: 28.1 MiB (0.7%)
  4: cpu: 4.9% command: firefox-esr pid: 2266 mem: 151.8 MiB (3.8%)
  5: cpu: 2.6% command: xorg pid: 1797 mem: 67.2 MiB (1.6%)
  Memory top: 5 of 156
  1: mem: 348.8 MiB (8.8%) command: firefox-esr pid: 2186 cpu: 13.9%
  2: mem: 181.7 MiB (4.5%) command: firefox-esr pid: 2305 cpu: 15.6%
  3: mem: 151.8 MiB (3.8%) command: firefox-esr pid: 2266 cpu: 4.9%
  4: mem: 133.6 MiB (3.3%) command: firefox-esr pid: 2346 cpu: 1.3%
  5: mem: 67.3 MiB (1.7%) command: firefox-esr pid: 2435 cpu: 0.0%
Info:
  Processes: 156 Uptime: 5m wakeups: 1 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service
  Compilers: gcc: 10.2.1 alt: 10 Client: IceWM v: 2.9.9 inxi: 3.3.19

September 10, 2022 at 8:41 pm #88527

In reply to: Unable to install Winehq-staging with Package Installer

Member

marcelocripe

I did other tests with a LiveUSB containing the updated antiX 21 this week in an attempt to install Winehq-staging. I followed the tutorial from this URL https://debian.pkgs.org/10/winehq-amd64/wine-staging_5.10~buster_amd64.deb.html with some adaptations for antiX.

Eu fiz outros testes com um LiveUSB contendo o antiX 21 atualizado nesta semana na tentativa de instalar o Winehq-staging. Eu segui o tutorial deste URL (o URL está no texto em Inglês) com algumas adaptações para o antiX.

demo@antix1:~
$ sudo apt update

demo@antix1:~
$ sudo dpkg –add-architecture i386

demo@antix1:~
$ sudo apt update

demo@antix1:~
$ sudo sh -c “echo ‘deb https://dl.winehq.org/wine-builds/debian/ bullseye main’ > ‘/etc/apt/sources.list.d/winehq.list'”

[sudo] senha para demo:
demo@antix1:~
$

demo@antix1:~
$ ls /etc/apt/sources.list.d
antix.list debian.list.dpkg-old winehq.list
bullseye-backports.list debian-stable-updates.list
debian.list various.list
demo@antix1:~
$

demo@antix1:~
$ wget https://dl.winehq.org/wine-builds/winehq.key
–2022-09-10 15:14:48– https://dl.winehq.org/wine-builds/winehq.key
Resolvendo dl.winehq.org (dl.winehq.org)… 151.101.2.217, 151.101.66.217, 151.101.130.217, …
Conectando-se a dl.winehq.org (dl.winehq.org)|151.101.2.217|:443… conectado.
A requisição HTTP foi enviada, aguardando resposta… 200 OK
Tamanho: 3220 (3,1K) [application/pgp-keys]
Salvando em: “winehq.key”

winehq.key 100%[===================>] 3,14K –.-KB/s em 0,002s

2022-09-10 15:14:48 (1,76 MB/s) – “winehq.key” salvo [3220/3220]

demo@antix1:~
$ sudo apt-key add winehq.key
Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
OK

demo@antix1:~
$ sudo apt install wine-staging
Lendo listas de pacotes… Pronto
Construindo árvore de dependências… Pronto
Lendo informação de estado… Pronto
Alguns pacotes não puderam ser instalados. Isto pode significar que
você solicitou uma situação impossível ou, se você está usando a
distribuição instável, que alguns pacotes requeridos não foram
criados ainda ou foram retirados da “Incoming”.
A informação a seguir pode ajudar a resolver a situação:

Os pacotes a seguir têm dependências desencontradas:
libgphoto2-6:i386 : Depende: libcurl4:i386 (>= 7.16.2) mas não é instalável
E: Impossível corrigir problemas, você manteve (hold) pacotes quebrados.
demo@antix1:~
$

I would like to understand what this sentence really means “E: Impossible to fix problems, you kept (hold) broken packages.”, even though it is translated to pt-BR it doesn’t make any sense, because it doesn’t say who it was that “held (hold) broken packages”. Who or what is making the “broken packages”?

Eu gostaria de compreender o que realmente significa esta frase “E: Impossível corrigir problemas, você manteve (hold) pacotes quebrados.”, mesmo estando traduzida para pt-BR não faz sentido algum, pois não diz quem foi que “manteve (hold) pacotes quebrados”. Quem ou o que está tornando os “pacotes quebrados”?

September 10, 2022 at 3:33 pm #88486

Topic: How Do I Adjust Power Settings?

in forum antiX-21/22 “Grup Yorum”

Member

CyberGhost

Hi, I can’t seem to find a way to change the power settings for when my laptop is on battery or plugged in. When I have it plugged in, the screen goes dim, but when I have it on battery alone, the screen brightens up. I would like to be able to have it bright when plugged in like it is when on battery alone. Where do I find the config file to edit to make changes to the power settings? Also, based on my system info below, do I have the right kernel for my system? Thanks in advance! Here’s my system info:

System:
  Kernel: 5.10.137-antix.1-486-smp arch: i686 bits: 32 compiler: gcc v: 10.2.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.137-antix.1-486-smp
    root=UUID=370a8dff-c4b8-458d-8335-72c7bb799c0e ro quiet
  Desktop: IceWM v: 2.9.9 vt: 7 dm: slimski v: 1.5.0
    Distro: antiX-21_386-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: Laptop System: Hewlett-Packard product: HP Pavilion dv1000 (PR425UA#ABA) v: Rev 1
    serial: <superuser required> Chassis: Quanta type: 10 serial: <superuser required>
  Mobo: Quanta model: 09B8 v: 34.20 serial: <superuser required> BIOS: Hewlett-Packard v: F.12
    date: 11/08/2004
Battery:
  ID-1: BAT0 charge: 45.5 Wh (100.0%) condition: 45.5/88.8 Wh (51.2%) volts: 12.4 min: 14.8
    model: Hewlett-Packard JM-12 type: Li-ion serial: <filter> status: not charging
Memory:
  RAM: total: 964.8 MiB used: 272 MiB (28.2%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots:
  Permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Pentium M bits: 32 arch: M Dothan built: 2003-05 process: Intel 90nm
    family: 6 model-id: 0xD (13) stepping: 6 microcode: 0x18
  Topology: cpus: 1x cores: 1 smt: <unsupported> cache: 2 MiB note: check
  Speed (MHz): 600 min/max: 600/1600 scaling: driver: acpi-cpufreq governor: schedutil core:
    1: 600 bogomips: 3192
  Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr pbe pge
    pse sep ss sse sse2 tm tm2 tsc vme
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX unsupported
  Type: l1tf status: Vulnerable
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown status: Vulnerable
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2
    mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel 82852/855GM Integrated Graphics vendor: Hewlett-Packard driver: i915 v: kernel
    arch: Gen2 process: Intel 130nm built: 2002-03 ports: active: LVDS-1 empty: VGA-1
    bus-ID: 00:02.0 chip-ID: 8086:3582 class-ID: 0300
  Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: intel
    unloaded: fbdev,modesetting,vesa gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1280x768 s-dpi: 96 s-size: 338x203mm (13.31x7.99") s-diag: 394mm (15.52")
  Monitor-1: LVDS-1 mapped: LVDS1 model: Seiko Epson 0x5642 built: 2004 res: 1280x768 hz: 60
    dpi: 108 gamma: 1.2 chroma: red: x: 0.580 y: 0.341 green: x: 0.310 y: 0.549 blue: x: 0.153
    y: 0.153 white: x: 0.314 y: 0.329 size: 300x180mm (11.81x7.09") diag: 356mm (14") ratio: 15:9
    modes: 1280x768
  OpenGL: renderer: Mesa DRI Intel 852GM/855GM x86/MMX/SSE2 v: 1.3 Mesa 20.3.5
    direct render: Yes
Audio:
  Device-1: Intel 82801DB/DBL/DBM AC97 Audio vendor: Hewlett-Packard driver: snd_intel8x0
    v: kernel bus-ID: 00:1f.5 chip-ID: 8086:24c5 class-ID: 0401
  Sound Server-1: ALSA v: k5.10.137-antix.1-486-smp running: yes
Network:
  Device-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Hewlett-Packard
    driver: 8139too v: 0.9.28 modules: 8139cp port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:8139
    class-ID: 0200
  IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> type: dynamic mngtmpaddr scope: global
  IP v6: <filter> scope: link
  Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network vendor: Hewlett-Packard
    driver: ipw2200 v: 1.2.2kmprq modules: wl bus-ID: 02:06.0 chip-ID: 8086:4220 class-ID: 0280
  IF: eth1 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 149.05 GiB used: 4.56 GiB (3.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Hitachi model: HTS541616J9AT00 size: 149.05 GiB
    block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: A70H
    scheme: MBR
  Optical-1: /dev/sr0 vendor: PIONEER model: DVD-RW DVR-K14 rev: 1.14
    dev-links: cdrom,cdrw,dvd,dvdrw
  Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running
Partition:
  ID-1: / raw-size: 147.54 GiB size: 144.17 GiB (97.71%) used: 4.56 GiB (3.2%) fs: ext4
    dev: /dev/sda1 maj-min: 8:1 label: rootantiX21 uuid: 370a8dff-c4b8-458d-8335-72c7bb799c0e
Swap:
  Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100)
  ID-1: swap-1 type: partition size: 1.5 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
    maj-min: 8:2 label: swapantiX uuid: 5b861ae7-9b9f-4848-bedb-5afd5502cf4c
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
  Device-1: 2-1:2 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid
    interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301
  Hub-3: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
  Hub-4: 4-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001
    class-ID: 0900
Sensors:
  Message: No sensor data found. Is lm-sensors configured?
Repos:
  Packages: apt: 1571 lib: 744
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/antix.list
    1: deb http: //mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye/ bullseye main nosystemd nonfree
  Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list
    1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http: //ftp.us.debian.org/debian/ bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http: //ftp.us.debian.org/debian/ bullseye main contrib non-free
    2: deb http: //security.debian.org/ bullseye-security main contrib non-free
  No active apt repos in: /etc/apt/sources.list.d/various.list
Processes:
  CPU top: 5 of 117
  1: cpu: 25.0% command: yad pid: 2475 mem: 23.2 MiB (2.4%)
  2: cpu: 5.3% command: xorg pid: 1802 mem: 25.3 MiB (2.6%)
  3: cpu: 2.9% command: desktop-session started by: bash pid: 2049 mem: 3.27 MiB (0.3%)
  4: cpu: 2.8% command: slimski pid: 1793 mem: 7.81 MiB (0.8%)
  5: cpu: 2.0% command: init pid: 1 mem: 1.74 MiB (0.1%)
  Memory top: 5 of 117
  1: mem: 25.3 MiB (2.6%) command: xorg pid: 1802 cpu: 5.3%
  2: mem: 23.2 MiB (2.4%) command: yad pid: 2475 cpu: 25.0%
  3: mem: 17.5 MiB (1.8%) command: zzzfm pid: 2129 cpu: 1.1%
  4: mem: 15.8 MiB (1.6%) command: volumeicon pid: 2185 cpu: 0.2%
  5: mem: 15.4 MiB (1.5%) command: icewm pid: 2123 cpu: 1.3%
Info:
  Processes: 117 Uptime: 1m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service
  Compilers: gcc: 10.2.1 alt: 10 Client: IceWM v: 2.9.9 inxi: 3.3.19

This topic was modified 8 months ago by CyberGhost.
This topic was modified 8 months ago by CyberGhost.

September 5, 2022 at 3:58 pm #88120

In reply to: [SOLVED]: chromium sse3 error message in smithfield cpu

Member

madibi

Yesterday I noticed the very same problem:

1. I downloaded from the Italian mirror antiX 21 base
2. I installed it on an external HD USB using “create Live USB”
3. I did “sudo apt-get update && sudo apt-get dist-upgrade”
4. I installed chromium from “software installer”

when I tried to start the program I received the same message as johnd.

On this same pc with the “traditional” install on the hd all is working (with the chromium version 104.0.5112.79)
now the issue is with the new version 105.0.5195.52.

Moreover I should highlight that my pc seems to have the support for sse3.

$ inxi -Fzx
System:
Kernel: 4.9.0-279-antix.1-486-smp arch: i686 bits: 32 compiler: gcc
v: 10.2.1 Desktop: JWM v: 2.4.2
Distro: antiX-21_386-base Grup Yorum 31 October 2021
base: Debian GNU/Linux 11 (bullseye)
Machine:
Type: Laptop System: TOSHIBA product: Satellite A110 v: PSAB0E-007002IT
serial: <superuser required>
Mobo: TOSHIBA model: HTW20 v: Null serial: <superuser required>
BIOS: TOSHIBA v: 1.30 date: 07/20/2006
Battery:
ID-1: BAT1 charge: 0% condition: 44.4/44.4 Wh (100.0%) volts: 11.1
min: 11.1 model: TOSHIBA PA3465U status: N/A
CPU:
Info: dual core model: Intel T2250 bits: 32 type: MCP arch: M Yonah rev: 8
cache: L1: 128 KiB L2: 2 MiB
Speed (MHz): avg: 1066 high: 1333 min/max: 800/1733 cores: 1: 1333 2: 800
bogomips: 6915
Flags: ht pae sse sse2 sse3
Graphics:
Device-1: Intel Mobile 945GM/GMS 943/940GML Express Integrated Graphics
vendor: Toshiba driver: i915 v: kernel arch: Gen3.5 bus-ID: 00:02.0
Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: intel
unloaded: fbdev,modesetting,vesa gpu: i915 resolution: 1280×800~60Hz
OpenGL: renderer: Mesa DRI Intel 945GM x86/MMX/SSE2 v: 1.4 Mesa 20.3.5
direct render: Yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Toshiba
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
Sound Server-1: ALSA v: k4.9.0-279-antix.1-486-smp running: yes
Sound Server-2: PulseAudio v: 14.2 running: no
Network:
Device-1: Intel PRO/Wireless 3945ABG [Golan] Network driver: iwl3945
v: in-tree:s bus-ID: 04:00.0
IF: wlan0 state: up mac: <filter>
Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Toshiba
driver: r8169 v: 2.3LK-NAPI port: 4000 bus-ID: 05:00.0
IF: eth1 state: down mac: <filter>
Drives:
Local Storage: total: 242.21 GiB used: 7.47 GiB (3.1%)
ID-1: /dev/sda vendor: Hitachi model: HTS541010G9SA00 size: 93.16 GiB
ID-2: /dev/sdb type: USB vendor: Hitachi model: HTS542516K9SA00
size: 149.05 GiB
Partition:
Message: No partition data found.
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%)
file: /live/boot-dev/swap-file
Sensors:
System Temperatures: cpu: 52.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 128 Uptime: 19m Memory: 2.95 GiB used: 428.1 MiB (14.2%)
Init: SysVinit runlevel: 5 Compilers: gcc: 10.2.1 Packages: 1232
Shell: Bash v: 5.1.4 inxi: 3.3.19

$ inxi -r
Repos:
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://it.mxrepo.com/antix/bullseye bullseye main nosystemd nonfree
Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list
1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.it.debian.org/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.it.debian.org/debian/ bullseye main contrib non-free
2: deb http://security.debian.org/ bullseye-security main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/various.list

What can I do?

For me chromium on this pc is very important because it is simply perfect to all my needs. In the worst case I’ll follow the solution to stop its updates, waiting to find another browser that fits all my needs 🙂

Thanks in advance for your suggestions

September 4, 2022 at 1:25 pm #88050

In reply to: How-to install applications

Moderator

caprea

Which package?
Did you also enable the testing repo in /etc/apt/sources.list.d/antix.list ?

Author

Search Results

Viewing 15 results - 61 through 75 (of 567 total)

← 1 … 4 5 6 … 38 →

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.