-
AuthorSearch Results
-
February 26, 2023 at 4:40 pm #100681
In reply to: What are you “here” with today?
Moderator
Brian Masinick
UngoogledChromium certainly uses fewer resources than Firefox – clear evidence right here –
sudo ps_mem.py Private + Shared = RAM used Program 76.0 KiB + 11.5 KiB = 87.5 KiB pause 88.0 KiB + 12.5 KiB = 100.5 KiB runit 92.0 KiB + 14.5 KiB = 106.5 KiB bpfilter_umh 100.0 KiB + 16.5 KiB = 116.5 KiB runsvdir 128.0 KiB + 17.5 KiB = 145.5 KiB svlogd 192.0 KiB + 23.5 KiB = 215.5 KiB gpm 204.0 KiB + 24.5 KiB = 228.5 KiB atd 288.0 KiB + 28.5 KiB = 316.5 KiB acpid 264.0 KiB + 61.5 KiB = 325.5 KiB rtkit-daemon 400.0 KiB + 75.5 KiB = 475.5 KiB dbus-launch 372.0 KiB + 156.5 KiB = 528.5 KiB udevil 364.0 KiB + 181.5 KiB = 545.5 KiB icewm-session 480.0 KiB + 120.5 KiB = 600.5 KiB rpcbind 536.0 KiB + 264.0 KiB = 800.0 KiB getty (4) 624.0 KiB + 401.5 KiB = 1.0 MiB devmon 732.0 KiB + 430.5 KiB = 1.1 MiB dconf-service 344.0 KiB + 946.0 KiB = 1.3 MiB saned (2) 848.0 KiB + 486.5 KiB = 1.3 MiB desktop-session 924.0 KiB + 529.5 KiB = 1.4 MiB at-spi2-registryd 1.2 MiB + 536.5 KiB = 1.7 MiB dbus-daemon (3) 1.4 MiB + 357.5 KiB = 1.8 MiB sudo 1.8 MiB + 67.5 KiB = 1.8 MiB elogind 1.6 MiB + 247.5 KiB = 1.8 MiB udevd 1.6 MiB + 387.0 KiB = 2.0 MiB runsv (24) 1.6 MiB + 409.5 KiB = 2.0 MiB ntpd 1.9 MiB + 274.5 KiB = 2.1 MiB bluetoothd 2.1 MiB + 48.5 KiB = 2.2 MiB rsyslogd 1.9 MiB + 400.5 KiB = 2.3 MiB connmand 2.4 MiB + 495.5 KiB = 2.9 MiB bash 4.6 MiB + 24.5 KiB = 4.6 MiB haveged 4.5 MiB + 742.5 KiB = 5.3 MiB dhclient 4.6 MiB + 776.5 KiB = 5.3 MiB wpa_supplicant 4.2 MiB + 1.1 MiB = 5.3 MiB slimski 4.9 MiB + 555.5 KiB = 5.5 MiB at-spi-bus-launcher 5.7 MiB + 830.5 KiB = 6.5 MiB conky 4.4 MiB + 2.6 MiB = 7.0 MiB volumeicon 6.1 MiB + 2.0 MiB = 8.1 MiB icewm 11.0 MiB + 4.1 MiB = 15.1 MiB roxterm 21.3 MiB + 2.7 MiB = 24.0 MiB zzzfm 48.9 MiB + 22.5 MiB = 71.4 MiB Xorg 460.9 MiB + 183.4 MiB = 644.3 MiB chrome (14) --------------------------------- 833.6 MiB =================================--
Brian MasinickFebruary 26, 2023 at 3:11 pm #100669In reply to: Can’t get online
Moderator
Brian Masinick
Hello again! With Connman (or the cmst tool that runs Connman) there are various network components that you can enable or disable when you run – for instance, Ethernet, Wireless, or Bluetooth. If using the wireless interface, this is also where you select the specific access point.
I can provide more specifics if you have additional questions. In addition to Connman, should you continue to experience difficulties with Connman, you can use Ceni; there is a tool to change or switch between these two network management tools. The one thing that is extremely important is to choose one or the other during any particular session. If both happen to get invoked, this definitely causes issues, and that’s why the switching tool was created.
--
Brian MasinickFebruary 26, 2023 at 3:07 pm #100667Topic: keyboard mapping
in forum New Users and General QuestionsMembersalvuzzo
Not sure if this is the correct mailbox to post my request, if not I’ll be fast to redirect with my apologies.
The problem is that I need to remap a few keys, in order to add a few polish on my Italian keyboard.
The reason is that I’m studying polish, but I don’t want to switch to the Polish keyboard. It will be enough to add just a few special characters (ążćśłźę).
On my W10 system I install the AutoHotkey program with a AHK file at startup that maps a few alt-gr combinations to the desired chars.
Something like:
alt-gr a -> ą
alt-gr e -> ę
Bytw, autohokey is a handy program that makes much much more.
So, questions are:
1) how to map desired chars?
2) is there a AutoHotkey linux equivalent to be used on Antix?$ inxi -zv7 System: Kernel: 5.10.142-antix.2-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: IceWM v: 3.0.1 dm: slimski v: 1.5.0 Distro: antiX-22_x64-full Grup Yorum 18 October 2022 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Other-vm? System: FUJITSU SIEMENS product: ESPRIMO Mobile V5535 v: V1.03 serial: <superuser required> Mobo: FUJITSU SIEMENS model: Z17M2.0 v: V1.03 serial: <superuser required> BIOS: Phoenix v: 1.06 date: 05/30/08 Battery: ID-1: BAT0 charge: 15.8 Wh (55.2%) condition: 28.6/48.8 Wh (58.6%) volts: 12.4 min: 11.1 model: AAIN SMP SDI e02741401C14C08500080 type: Li-ion serial: <filter> status: charging Memory: RAM: total: 1.69 GiB used: 412.9 MiB (23.9%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: dual core model: Intel Core2 Duo T5750 bits: 64 type: MCP smt: <unsupported> arch: Core2 Merom rev: D cache: L1: 128 KiB L2: 2 MiB Speed (MHz): avg: 1503 high: 1582 min/max: 1000/2000 cores: 1: 1582 2: 1425 bogomips: 7993 Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts est fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge pni pse pse36 pti rep_good sep sse sse2 ssse3 syscall tm tm2 tsc vme xtpr Graphics: Device-1: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter vendor: Fujitsu Solutions driver: N/A bus-ID: 01:00.0 chip-ID: 1039:6351 class-ID: 0300 Display: server: X.Org v: 1.20.11 driver: X: loaded: vesa unloaded: fbdev,modesetting alternate: sis gpu: N/A display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 271x203mm (10.67x7.99") s-diag: 339mm (13.33") Monitor-1: default res: 1024x768 size: N/A modes: N/A OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1 direct render: Yes Audio: Device-1: Silicon Integrated Systems [SiS] Azalia Audio vendor: Fujitsu Solutions driver: snd_hda_intel v: kernel bus-ID: 00:0f.0 chip-ID: 1039:7502 class-ID: 0403 Sound Server-1: ALSA v: k5.10.142-antix.2-amd64-smp running: yes Network: Device-1: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter vendor: Fujitsu Solutions driver: sis190 v: 1.4 port: 1080 bus-ID: 00:04.0 chip-ID: 1039:0191 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter driver: ath5k v: kernel pcie: speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 168c:001c class-ID: 0200 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 232.89 GiB used: 4.9 GiB (2.1%) ID-1: /dev/sda vendor: Fujitsu model: MHY2250BH size: 232.89 GiB speed: <unknown> type: N/A serial: <filter> rev: 000B scheme: MBR Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GSA-T40N rev: JW02 dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running Partition: ID-1: / size: 225.58 GiB used: 4.9 GiB (2.2%) fs: ext4 dev: /dev/sda1 label: rootantiX22 uuid: dc4657ca-05ae-4649-a6e4-d40a87488114 Swap: ID-1: swap-1 type: partition size: 2.62 GiB used: 12 KiB (0.0%) priority: -2 dev: /dev/sda2 label: swapantiX uuid: 55bd0041-eb97-4cb6-85eb-0d46e0b33564 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed or root hub ports: 8 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: Full speed or root hub ports: 4 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-3: 3-0:1 info: Full speed or root hub ports: 4 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 3-1:2 info: Belkin MI-2150 Trust Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 1241:1166 class-ID: 0301 Sensors: System Temperatures: cpu: 55.0 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 137 Uptime: 35m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Packages: apt: 1587 Shell: Bash v: 5.1.4 running-in: roxterm inxi: 3.3.19- This topic was modified 2 months, 2 weeks ago by salvuzzo. Reason: Adding inxi result
February 25, 2023 at 10:22 pm #100654In reply to: What are you “here” with today?
Moderator
Brian Masinick
inxi -bw System: Host: antix23 Kernel: 4.19.0-256-antix.1-amd64-smp arch: x86_64 bits: 64 Desktop: IceWM v: 3.3.1 Distro: antiX-23-runit_x64-full Grup Yorum 3 February 2023 Machine: Type: Laptop System: Dell product: Inspiron 5558 v: N/A serial: <superuser required> Mobo: Dell model: 086DKN v: A00 serial: <superuser required> UEFI: Dell v: A18 date: 12/30/2019 Battery: ID-1: BAT0 charge: 30.1 Wh (100.0%) condition: 30.1/41.4 Wh (72.6%) CPU: Info: dual core Intel Core i7-5500U [MT MCP] speed (MHz): avg: 2036 min/max: 500/3000 Graphics: Device-1: Intel HD Graphics 5500 driver: i915 v: kernel Device-2: NVIDIA GK208BM [GeForce 920M] driver: nvidiafb v: kernel Device-3: Suyin Integrated_Webcam_HD type: USB driver: uvcvideo Display: server: X.Org v: 1.21.1.7 driver: X: loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 resolution: 1366x768~60Hz API: OpenGL v: 4.6 Mesa 22.3.3 renderer: Mesa Intel HD Graphics 5500 (BDW GT2) Network: Device-1: Intel Wireless 3160 driver: iwlwifi Device-2: Realtek RTL810xE PCI Express Fast Ethernet driver: r8169 Device-3: Intel Bluetooth wireless interface type: USB driver: btusb Drives: Local Storage: total: 447.13 GiB used: 10.97 GiB (2.5%) Weather: Report: temperature: 11.59 C (53 F) conditions: overcast clouds Locale: Greenville, SC, USA current time: Sat 25 Feb 2023 05:21:42 PM EST (America/New_York) Source: OpenWeatherMap.org Info: Processes: 160 Uptime: 11m Memory: 7.7 GiB used: 957 MiB (12.1%) Shell: Bash inxi: 3.3.25--
Brian MasinickFebruary 25, 2023 at 10:13 pm #100652In reply to: antiX-23-alpha1-runit-full (64bit) for testing
Moderator
Brian Masinick
Fresh login with the Kernel: 4.19.0-256-antix.1-amd64-smp x86_64 sudo ps_mem.py Private + Shared = RAM used Program 112.0 KiB + 17.5 KiB = 129.5 KiB runit 128.0 KiB + 21.5 KiB = 149.5 KiB runsvdir 148.0 KiB + 30.5 KiB = 178.5 KiB seatd 296.0 KiB + 115.5 KiB = 411.5 KiB cron 388.0 KiB + 121.5 KiB = 509.5 KiB dbus-launch 408.0 KiB + 140.0 KiB = 548.0 KiB svlogd (4) 368.0 KiB + 272.5 KiB = 640.5 KiB icewm-session 388.0 KiB + 288.5 KiB = 676.5 KiB udevil 464.0 KiB + 467.0 KiB = 931.0 KiB avahi-daemon (2) 648.0 KiB + 437.5 KiB = 1.1 MiB devmon 760.0 KiB + 378.0 KiB = 1.1 MiB dbus-daemon (2) 700.0 KiB + 467.5 KiB = 1.1 MiB getty (5) 816.0 KiB + 435.5 KiB = 1.2 MiB desktop-session 932.0 KiB + 756.0 KiB = 1.6 MiB sudo (2) 1.5 MiB + 418.5 KiB = 1.9 MiB runsv (17) 1.6 MiB + 464.5 KiB = 2.1 MiB bash 1.9 MiB + 535.5 KiB = 2.4 MiB bluetoothd 964.0 KiB + 1.5 MiB = 2.5 MiB udevd (2) 2.2 MiB + 662.5 KiB = 2.9 MiB conky 2.9 MiB + 664.5 KiB = 3.6 MiB cupsd 2.2 MiB + 1.3 MiB = 3.6 MiB sshd 3.5 MiB + 270.5 KiB = 3.8 MiB connmand 4.6 MiB + 1.3 MiB = 5.9 MiB wpa_supplicant 3.3 MiB + 3.4 MiB = 6.7 MiB volumeicon 5.4 MiB + 2.4 MiB = 7.8 MiB icewm 8.9 MiB + 1.4 MiB = 10.3 MiB slimski 9.5 MiB + 3.7 MiB = 13.1 MiB zzzfm 11.8 MiB + 1.5 MiB = 13.3 MiB ntpd 12.1 MiB + 5.1 MiB = 17.1 MiB roxterm 100.7 MiB + 1.6 MiB = 102.2 MiB Xorg --------------------------------- 209.5 MiB =================================--
Brian MasinickFebruary 25, 2023 at 10:00 pm #100651In reply to: antiX-23-alpha1-runit-full (64bit) for testing
Moderator
Brian Masinick
sudo ps_mem.py
Private + Shared = RAM used Program112.0 KiB + 12.5 KiB = 124.5 KiB runit
128.0 KiB + 16.5 KiB = 144.5 KiB runsvdir
148.0 KiB + 21.5 KiB = 169.5 KiB seatd
292.0 KiB + 72.5 KiB = 364.5 KiB cron
364.0 KiB + 118.5 KiB = 482.5 KiB icewm-session
352.0 KiB + 156.5 KiB = 508.5 KiB udevil
420.0 KiB + 118.0 KiB = 538.0 KiB svlogd (4)
492.0 KiB + 408.0 KiB = 900.0 KiB avahi-daemon (2)
736.0 KiB + 190.0 KiB = 926.0 KiB dbus-launch (2)
760.0 KiB + 211.5 KiB = 971.5 KiB gconfd-2
648.0 KiB + 392.5 KiB = 1.0 MiB devmon
816.0 KiB + 378.5 KiB = 1.2 MiB desktop-session
968.0 KiB + 470.5 KiB = 1.4 MiB getty (7)
864.0 KiB + 759.0 KiB = 1.6 MiB sudo (2)
1.3 MiB + 491.0 KiB = 1.8 MiB dbus-daemon (4)
1.7 MiB + 353.5 KiB = 2.0 MiB runsv (19)
1.8 MiB + 295.5 KiB = 2.1 MiB udevd
1.9 MiB + 272.5 KiB = 2.2 MiB bluetoothd
1.8 MiB + 437.5 KiB = 2.2 MiB bash
2.6 MiB + 389.5 KiB = 3.0 MiB dconf-service
2.9 MiB + 609.5 KiB = 3.5 MiB cupsd
2.2 MiB + 1.3 MiB = 3.5 MiB sshd
3.0 MiB + 585.5 KiB = 3.6 MiB at-spi-bus-launcher
3.6 MiB + 131.5 KiB = 3.7 MiB connmand
4.2 MiB + 452.5 KiB = 4.6 MiB conky
4.7 MiB + 1.2 MiB = 5.9 MiB wpa_supplicant
6.4 MiB + 1.6 MiB = 7.9 MiB icewm
7.3 MiB + 2.3 MiB = 9.6 MiB volumeicon
8.9 MiB + 955.5 KiB = 9.8 MiB slimski
11.7 MiB + 1.5 MiB = 13.1 MiB ntpd
12.4 MiB + 3.9 MiB = 16.3 MiB roxterm
14.1 MiB + 3.8 MiB = 17.9 MiB zzzfm
48.1 MiB + 24.3 MiB = 72.4 MiB Xorg
469.3 MiB + 114.6 MiB = 583.9 MiB firefox-bin (9)
———————————
779.2 MiB
=================================This is Firefox Nightly 112.0a1 (2023-02-24) (64-bit) on antiX 23 Alpha 1 with a single tab open.
--
Brian MasinickFebruary 25, 2023 at 8:41 pm #100647In reply to: What are you “here” with today?
Moderator
Brian Masinick
Legacy OS:
inxi -bw System: Host: LegacyOS Kernel: 6.0.0-0.deb11.2-amd64 arch: x86_64 bits: 64 Desktop: IceWM v: 3.3.0 Distro: Legacyos-2023_x64 Machine: Type: Laptop System: Dell product: Inspiron 5558 v: N/A serial: <superuser required> Mobo: Dell model: 086DKN v: A00 serial: <superuser required> UEFI: Dell v: A18 date: 12/30/2019 Battery: ID-1: BAT0 charge: 30.1 Wh (100.0%) condition: 30.1/41.4 Wh (72.6%) CPU: Info: dual core Intel Core i7-5500U [MT MCP] speed (MHz): avg: 798 min/max: 500/3000 Graphics: Device-1: Intel HD Graphics 5500 driver: i915 v: kernel Device-2: NVIDIA GK208BM [GeForce 920M] driver: N/A Device-3: Suyin Integrated_Webcam_HD type: USB driver: uvcvideo Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 resolution: 1366x768~60Hz API: OpenGL v: 4.6 Mesa 20.3.5 renderer: Mesa Intel HD Graphics 5500 (BDW GT2) Network: Device-1: Intel Wireless 3160 driver: iwlwifi Device-2: Realtek RTL810xE PCI Express Fast Ethernet driver: r8169 Device-3: Intel Bluetooth wireless interface type: USB driver: btusb Drives: Local Storage: total: 447.13 GiB used: 19.37 GiB (4.3%) Weather: Report: temperature: 11.29 C (52 F) conditions: overcast clouds Locale: Greenville, SC, USA current time: Sat 25 Feb 2023 03:37:36 PM EST (America/New_York) Source: OpenWeatherMap.org Info: Processes: 144 Uptime: 15m Memory: 7.68 GiB used: 619.2 MiB (7.9%) Shell: Bash inxi: 3.3.25--
Brian MasinickFebruary 23, 2023 at 10:41 pm #100498In reply to: What are you “here” with today?
Moderator
Brian Masinick
sudo ps_mem.py Private + Shared = RAM used Program 76.0 KiB + 10.5 KiB = 86.5 KiB pause 92.0 KiB + 12.5 KiB = 104.5 KiB runit 104.0 KiB + 15.5 KiB = 119.5 KiB runsvdir 128.0 KiB + 16.5 KiB = 144.5 KiB svlogd 200.0 KiB + 24.5 KiB = 224.5 KiB gpm 208.0 KiB + 25.5 KiB = 233.5 KiB atd 288.0 KiB + 22.5 KiB = 310.5 KiB acpid 268.0 KiB + 56.5 KiB = 324.5 KiB rtkit-daemon 360.0 KiB + 101.5 KiB = 461.5 KiB icewm-session 388.0 KiB + 150.5 KiB = 538.5 KiB udevil 452.0 KiB + 207.5 KiB = 659.5 KiB rpcbind 532.0 KiB + 287.0 KiB = 819.0 KiB getty (4) 756.0 KiB + 171.0 KiB = 927.0 KiB dbus-launch (2) 748.0 KiB + 182.5 KiB = 930.5 KiB gconfd-2 620.0 KiB + 390.5 KiB = 1.0 MiB devmon 788.0 KiB + 231.5 KiB = 1.0 MiB saned 752.0 KiB + 378.5 KiB = 1.1 MiB dconf-service 836.0 KiB + 447.5 KiB = 1.3 MiB desktop-session 904.0 KiB + 429.5 KiB = 1.3 MiB at-spi2-registryd 844.0 KiB + 585.5 KiB = 1.4 MiB at-spi-bus-launcher 1.7 MiB + 72.5 KiB = 1.8 MiB elogind 1.4 MiB + 426.5 KiB = 1.8 MiB sudo 1.6 MiB + 244.5 KiB = 1.8 MiB udevd 1.5 MiB + 418.5 KiB = 1.9 MiB ntpd 1.5 MiB + 395.0 KiB = 1.9 MiB runsv (24) 1.5 MiB + 548.0 KiB = 2.0 MiB dbus-daemon (4) 1.9 MiB + 251.5 KiB = 2.1 MiB bluetoothd 2.2 MiB + 62.5 KiB = 2.3 MiB rsyslogd 1.9 MiB + 493.5 KiB = 2.4 MiB bash 3.2 MiB + 24.5 KiB = 3.2 MiB haveged 2.6 MiB + 741.5 KiB = 3.3 MiB dhclient 3.6 MiB + 210.5 KiB = 3.8 MiB connmand 3.6 MiB + 788.5 KiB = 4.4 MiB conky 4.5 MiB + 810.5 KiB = 5.3 MiB slimski 4.6 MiB + 766.5 KiB = 5.4 MiB wpa_supplicant 4.0 MiB + 3.2 MiB = 7.2 MiB volumeicon 5.9 MiB + 1.3 MiB = 7.2 MiB icewm 10.6 MiB + 3.8 MiB = 14.4 MiB roxterm 41.2 MiB + 22.1 MiB = 63.3 MiB Xorg 789.3 MiB + 128.5 MiB = 917.7 MiB firefox-bin (12) --------------------------------- 1.0 GiB =================================--
Brian MasinickFebruary 23, 2023 at 8:48 pm #100482In reply to: What are you “here” with today?
Moderator
Brian Masinick
One more time, back with the third kernel I’ve been using to test various Version 6.1 kernels on my HP-14 hardware.
Here are two of the information tools and their outputs.
sudo ps_mem.py Private + Shared = RAM used Program 76.0 KiB + 13.5 KiB = 89.5 KiB pause 92.0 KiB + 14.5 KiB = 106.5 KiB runit 104.0 KiB + 19.5 KiB = 123.5 KiB runsvdir 128.0 KiB + 19.5 KiB = 147.5 KiB svlogd 200.0 KiB + 30.5 KiB = 230.5 KiB gpm 208.0 KiB + 30.5 KiB = 238.5 KiB atd 288.0 KiB + 28.5 KiB = 316.5 KiB acpid 360.0 KiB + 239.5 KiB = 599.5 KiB icewm-session 388.0 KiB + 237.5 KiB = 625.5 KiB udevil 452.0 KiB + 220.5 KiB = 672.5 KiB rpcbind 528.0 KiB + 321.0 KiB = 849.0 KiB getty (4) 756.0 KiB + 231.0 KiB = 987.0 KiB dbus-launch (2) 620.0 KiB + 417.5 KiB = 1.0 MiB devmon 760.0 KiB + 416.5 KiB = 1.1 MiB gconfd-2 788.0 KiB + 477.5 KiB = 1.2 MiB saned 836.0 KiB + 474.5 KiB = 1.3 MiB desktop-session 1.0 MiB + 786.5 KiB = 1.8 MiB at-spi2-registryd 1.7 MiB + 90.5 KiB = 1.8 MiB elogind 1.6 MiB + 272.5 KiB = 1.9 MiB udevd 1.4 MiB + 504.5 KiB = 1.9 MiB sudo 1.2 MiB + 795.5 KiB = 1.9 MiB at-spi-bus-launcher 1.3 MiB + 671.0 KiB = 2.0 MiB dbus-daemon (4) 1.5 MiB + 492.5 KiB = 2.0 MiB ntpd 1.5 MiB + 472.0 KiB = 2.0 MiB runsv (24) 2.1 MiB + 98.5 KiB = 2.2 MiB rsyslogd 1.9 MiB + 474.5 KiB = 2.3 MiB bluetoothd 1.9 MiB + 516.5 KiB = 2.4 MiB bash 3.2 MiB + 30.5 KiB = 3.2 MiB haveged 2.6 MiB + 751.5 KiB = 3.3 MiB dhclient 3.4 MiB + 300.5 KiB = 3.7 MiB connmand 3.7 MiB + 1.2 MiB = 4.9 MiB conky 4.4 MiB + 802.5 KiB = 5.2 MiB wpa_supplicant 4.6 MiB + 1.3 MiB = 5.9 MiB slimski 4.3 MiB + 4.3 MiB = 8.6 MiB volumeicon 6.2 MiB + 2.7 MiB = 8.9 MiB icewm 10.8 MiB + 5.7 MiB = 16.5 MiB roxterm 81.1 MiB + 1.3 MiB = 82.4 MiB Xorg --------------------------------- 174.4 MiB ================================= [brian-antix-hp-14fq1025nr]/home/masinick/bin: > pinxi -b System: Host: brian-antix-hp-14fq1025nr Kernel: 6.1.13-x64v3-xanmod1 arch: x86_64 bits: 64 Desktop: IceWM v: 3.3.1 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) CPU: Info: 6-core AMD Ryzen 5 5500U with Radeon Graphics [MT MCP] speed (MHz): avg: 1991 min/max: 1400/4056 Graphics: Device-1: AMD Lucienne driver: amdgpu v: kernel Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu resolution: 1920x1080~60Hz API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.49.0 6.1.13-x64v3-xanmod1 LLVM 11.0.1) Network: Device-1: Realtek driver: rtw89_8852ae Drives: Local Storage: total: 238.47 GiB used: 29.84 GiB (12.5%) Info: Processes: 250 Uptime: 5m Memory: 7.1 GiB used: 590.9 MiB (8.1%) Shell: Bash pinxi: 3.3.25-3--
Brian MasinickFebruary 23, 2023 at 2:57 pm #100436In reply to: What are you “here” with today?
Moderator
Brian Masinick
uptime;sudo ps_mem.py;pinxi -U;pinxi -bw 09:53:16 up 5 min, 1 user, load average: 0.42, 0.48, 0.24 Private + Shared = RAM used Program 80.0 KiB + 13.5 KiB = 93.5 KiB pause 92.0 KiB + 14.5 KiB = 106.5 KiB runit 88.0 KiB + 18.5 KiB = 106.5 KiB bpfilter_umh 100.0 KiB + 17.5 KiB = 117.5 KiB runsvdir 112.0 KiB + 27.5 KiB = 139.5 KiB run-parts 116.0 KiB + 25.5 KiB = 141.5 KiB sleep 124.0 KiB + 22.5 KiB = 146.5 KiB svlogd 84.0 KiB + 82.5 KiB = 166.5 KiB apt-compat 80.0 KiB + 92.5 KiB = 172.5 KiB sh 200.0 KiB + 29.5 KiB = 229.5 KiB gpm 204.0 KiB + 28.5 KiB = 232.5 KiB atd 220.0 KiB + 36.5 KiB = 256.5 KiB anacron 284.0 KiB + 31.5 KiB = 315.5 KiB acpid 396.0 KiB + 116.5 KiB = 512.5 KiB dbus-launch 360.0 KiB + 255.5 KiB = 615.5 KiB icewm-session 376.0 KiB + 241.5 KiB = 617.5 KiB udevil 472.0 KiB + 212.5 KiB = 684.5 KiB rpcbind 568.0 KiB + 339.0 KiB = 907.0 KiB getty (4) 636.0 KiB + 411.5 KiB = 1.0 MiB devmon 764.0 KiB + 426.5 KiB = 1.2 MiB gconfd-2 836.0 KiB + 485.5 KiB = 1.3 MiB desktop-session 372.0 KiB + 1.0 MiB = 1.4 MiB saned (2) 1.1 MiB + 590.5 KiB = 1.6 MiB dbus-daemon (3) 1.6 MiB + 261.5 KiB = 1.8 MiB udevd 1.8 MiB + 80.5 KiB = 1.9 MiB elogind 1.4 MiB + 510.5 KiB = 1.9 MiB sudo 1.5 MiB + 481.5 KiB = 2.0 MiB ntpd 1.6 MiB + 435.0 KiB = 2.0 MiB runsv (24) 1.9 MiB + 467.5 KiB = 2.3 MiB bluetoothd 1.9 MiB + 542.5 KiB = 2.4 MiB bash 3.3 MiB + 296.5 KiB = 3.6 MiB connmand 3.0 MiB + 823.5 KiB = 3.8 MiB at-spi2-registryd 3.1 MiB + 814.5 KiB = 3.9 MiB at-spi-bus-launcher 4.1 MiB + 89.5 KiB = 4.1 MiB rsyslogd 4.6 MiB + 27.5 KiB = 4.6 MiB haveged 4.2 MiB + 769.5 KiB = 5.0 MiB wpa_supplicant 4.6 MiB + 721.5 KiB = 5.3 MiB dhclient 4.5 MiB + 1.3 MiB = 5.9 MiB slimski 5.6 MiB + 1.2 MiB = 6.9 MiB conky 5.9 MiB + 2.7 MiB = 8.6 MiB icewm 4.4 MiB + 4.2 MiB = 8.7 MiB volumeicon 10.9 MiB + 5.8 MiB = 16.7 MiB roxterm 86.8 MiB + 1.3 MiB = 88.1 MiB Xorg --------------------------------- 191.4 MiB ================================= Starting pinxi self updater. Using tiny as downloader. Currently running pinxi version number: 3.3.25 Current version patch number: 02 Current version release date: 2023-02-16 Updating pinxi in /home/masinick/bin using inxi-perl branch as download source... Validating downloaded data... Successfully updated to inxi-perl branch version: 3.3.25 New inxi-perl branch version patch number: 03 New inxi-perl branch version release date: 2023-02-22 To run the new version, just start pinxi again. ---------------------------------------- Skipping man download because branch version is being used. System: Host: brian-antix-hp-14fq1025nr Kernel: 6.1.11-antix.1-amd64-smp arch: x86_64 bits: 64 Desktop: IceWM v: 3.3.1 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) CPU: Info: 6-core AMD Ryzen 5 5500U with Radeon Graphics [MT MCP] speed (MHz): avg: 2276 min/max: 1400/4056 Graphics: Device-1: AMD Lucienne driver: amdgpu v: kernel Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu resolution: 1920x1080~60Hz API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.49.0 6.1.11-antix.1-amd64-smp LLVM 11.0.1) Network: Device-1: Realtek driver: rtw89_8852ae Drives: Local Storage: total: 238.47 GiB used: 29.81 GiB (12.5%) Weather: Report: temperature: 20.58 C (69 F) conditions: scattered clouds Locale: Greenville, SC, USA current time: Thu 23 Feb 2023 09:53:19 AM EST (America/New_York) Source: OpenWeatherMap.org Info: Processes: 256 Uptime: 6m Memory: 7.11 GiB used: 709.6 MiB (9.8%) Shell: Bash pinxi: 3.3.25-3--
Brian MasinickFebruary 22, 2023 at 3:43 pm #100338In reply to: What are you “here” with today?
Moderator
Brian Masinick
I decided to group a variety of different informational tools together today, so here is a snapshot of information on my system using a few tools we do not mention a lot.
uptime 10:39:54 up 4 min, 1 user, load average: 0.61, 0.29, 0.12 [brian-antix-hp-14fq1025nr]/home/masinick: > vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 6169872 1668 906432 0 0 524 252 252 216 2 1 97 0 0 [brian-antix-hp-14fq1025nr]/home/masinick: > sudo ps_mem.py;pinxi -bw Private + Shared = RAM used Program 76.0 KiB + 13.5 KiB = 89.5 KiB pause 92.0 KiB + 13.5 KiB = 105.5 KiB runit 92.0 KiB + 17.5 KiB = 109.5 KiB bpfilter_umh 104.0 KiB + 18.5 KiB = 122.5 KiB runsvdir 108.0 KiB + 20.5 KiB = 128.5 KiB sleep 112.0 KiB + 24.5 KiB = 136.5 KiB run-parts 128.0 KiB + 20.5 KiB = 148.5 KiB svlogd 84.0 KiB + 79.5 KiB = 163.5 KiB sh 88.0 KiB + 79.5 KiB = 167.5 KiB apt-compat 200.0 KiB + 30.5 KiB = 230.5 KiB gpm 208.0 KiB + 27.5 KiB = 235.5 KiB atd 220.0 KiB + 36.5 KiB = 256.5 KiB anacron 288.0 KiB + 26.5 KiB = 314.5 KiB acpid 360.0 KiB + 236.5 KiB = 596.5 KiB icewm-session 376.0 KiB + 227.5 KiB = 603.5 KiB udevil 468.0 KiB + 210.5 KiB = 678.5 KiB rpcbind 552.0 KiB + 338.0 KiB = 890.0 KiB getty (4) 760.0 KiB + 235.0 KiB = 995.0 KiB dbus-launch (2) 652.0 KiB + 398.5 KiB = 1.0 MiB devmon 740.0 KiB + 415.5 KiB = 1.1 MiB gconfd-2 800.0 KiB + 484.5 KiB = 1.3 MiB saned 836.0 KiB + 488.5 KiB = 1.3 MiB desktop-session 1.8 MiB + 78.5 KiB = 1.8 MiB elogind 1.6 MiB + 265.5 KiB = 1.8 MiB udevd 1.4 MiB + 490.5 KiB = 1.9 MiB sudo 1.5 MiB + 492.5 KiB = 2.0 MiB ntpd 1.6 MiB + 429.0 KiB = 2.0 MiB runsv (24) 1.4 MiB + 650.0 KiB = 2.0 MiB dbus-daemon (4) 2.1 MiB + 83.5 KiB = 2.2 MiB rsyslogd 1.7 MiB + 523.5 KiB = 2.2 MiB bash 1.9 MiB + 463.5 KiB = 2.4 MiB bluetoothd 3.3 MiB + 298.5 KiB = 3.6 MiB connmand 3.0 MiB + 795.5 KiB = 3.8 MiB at-spi2-registryd 3.1 MiB + 764.5 KiB = 3.9 MiB at-spi-bus-launcher 5.0 MiB + 27.5 KiB = 5.0 MiB haveged 4.3 MiB + 767.5 KiB = 5.0 MiB wpa_supplicant 4.6 MiB + 717.5 KiB = 5.3 MiB dhclient 4.6 MiB + 1.3 MiB = 5.9 MiB slimski 5.7 MiB + 1.2 MiB = 6.9 MiB conky 4.4 MiB + 4.3 MiB = 8.6 MiB volumeicon 6.0 MiB + 2.7 MiB = 8.7 MiB icewm 10.8 MiB + 5.7 MiB = 16.5 MiB roxterm 87.2 MiB + 1.3 MiB = 88.5 MiB Xorg --------------------------------- 190.7 MiB ================================= System: Host: brian-antix-hp-14fq1025nr Kernel: 6.1.11-antix.1-amd64-smp arch: x86_64 bits: 64 Desktop: IceWM v: 3.3.1 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) CPU: Info: 6-core AMD Ryzen 5 5500U with Radeon Graphics [MT MCP] speed (MHz): avg: 1398 min/max: 1400/4056 Graphics: Device-1: AMD Lucienne driver: amdgpu v: kernel Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu resolution: 1920x1080~60Hz API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.49.0 6.1.11-antix.1-amd64-smp LLVM 11.0.1) Network: Device-1: Realtek driver: rtw89_8852ae Drives: Local Storage: total: 238.47 GiB used: 29.8 GiB (12.5%) Weather: Report: temperature: 18.22 C (65 F) conditions: overcast clouds Locale: Greenville, SC, USA current time: Wed 22 Feb 2023 10:40:47 AM EST (America/New_York) Source: OpenWeatherMap.org Info: Processes: 257 Uptime: 5m Memory: 7.11 GiB used: 672.2 MiB (9.2%) Shell: Bash pinxi: 3.3.25-2--
Brian MasinickFebruary 21, 2023 at 6:05 pm #100245In reply to: What are you “here” with today?
Moderator
Brian Masinick
sudo ps_mem.py Private + Shared = RAM used Program 76.0 KiB + 14.5 KiB = 90.5 KiB pause 88.0 KiB + 14.5 KiB = 102.5 KiB runit 92.0 KiB + 19.5 KiB = 111.5 KiB bpfilter_umh 104.0 KiB + 19.5 KiB = 123.5 KiB runsvdir 124.0 KiB + 20.5 KiB = 144.5 KiB svlogd 200.0 KiB + 34.5 KiB = 234.5 KiB anacron 200.0 KiB + 35.5 KiB = 235.5 KiB gpm 208.0 KiB + 30.5 KiB = 238.5 KiB atd 288.0 KiB + 35.5 KiB = 323.5 KiB acpid 396.0 KiB + 142.5 KiB = 538.5 KiB dbus-launch 360.0 KiB + 265.5 KiB = 625.5 KiB icewm-session 384.0 KiB + 304.5 KiB = 688.5 KiB udevil 480.0 KiB + 218.5 KiB = 698.5 KiB rpcbind 528.0 KiB + 312.0 KiB = 840.0 KiB getty (4) 416.0 KiB + 476.0 KiB = 892.0 KiB avahi-daemon (2) 624.0 KiB + 435.5 KiB = 1.0 MiB devmon 836.0 KiB + 445.0 KiB = 1.3 MiB dbus-daemon (2) 860.0 KiB + 489.5 KiB = 1.3 MiB desktop-session 356.0 KiB + 1.0 MiB = 1.4 MiB saned (2) 1.7 MiB + 95.5 KiB = 1.8 MiB elogind 1.6 MiB + 282.5 KiB = 1.9 MiB udevd 1.5 MiB + 477.5 KiB = 1.9 MiB ntpd 1.5 MiB + 510.5 KiB = 2.0 MiB sudo 1.6 MiB + 490.5 KiB = 2.1 MiB runsv (25) 1.7 MiB + 528.5 KiB = 2.2 MiB bash 1.9 MiB + 518.5 KiB = 2.4 MiB bluetoothd 3.3 MiB + 359.5 KiB = 3.7 MiB connmand 4.1 MiB + 83.5 KiB = 4.1 MiB rsyslogd 4.8 MiB + 31.5 KiB = 4.9 MiB haveged 4.4 MiB + 797.5 KiB = 5.2 MiB wpa_supplicant 4.6 MiB + 722.5 KiB = 5.3 MiB dhclient 4.5 MiB + 1.4 MiB = 5.9 MiB slimski 5.8 MiB + 1.3 MiB = 7.0 MiB conky 5.4 MiB + 2.9 MiB = 8.3 MiB icewm 4.2 MiB + 4.6 MiB = 8.9 MiB volumeicon 11.0 MiB + 5.9 MiB = 16.9 MiB roxterm 83.7 MiB + 1.4 MiB = 85.1 MiB Xorg --------------------------------- 180.4 MiB =================================pinxi -bw System: Host: brian-antix-hp-14fq1025nr Kernel: 6.1.11-antix.1-amd64-smp arch: x86_64 bits: 64 Desktop: IceWM v: 3.3.1 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) CPU: Info: 6-core AMD Ryzen 5 5500U with Radeon Graphics [MT MCP] speed (MHz): avg: 1691 min/max: 1400/4056 Graphics: Device-1: AMD Lucienne driver: amdgpu v: kernel Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu resolution: 1920x1080~60Hz API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.49.0 6.1.11-antix.1-amd64-smp LLVM 11.0.1) Network: Device-1: Realtek driver: rtw89_8852ae Drives: Local Storage: total: 238.47 GiB used: 29.8 GiB (12.5%) Weather: Report: temperature: 23.15 C (74 F) conditions: few clouds Locale: Greenville, SC, USA current time: Tue 21 Feb 2023 06:03:35 PM EST (America/New_York) Source: OpenWeatherMap.org Info: Processes: 267 Uptime: 1m Memory: 7.11 GiB used: 653.6 MiB (9.0%) Shell: Bash pinxi: 3.3.25-2--
Brian MasinickFebruary 20, 2023 at 10:22 pm #100195In reply to: What are you “here” with today?
Moderator
Brian Masinick
pinxi -bw System: Host: brian-antix-hp-14fq1025nr Kernel: 6.1.11-antix.1-amd64-smp arch: x86_64 bits: 64 Desktop: IceWM v: 3.3.1 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) CPU: Info: 6-core AMD Ryzen 5 5500U with Radeon Graphics [MT MCP] speed (MHz): avg: 1574 min/max: 1400/4056 Graphics: Device-1: AMD Lucienne driver: amdgpu v: kernel Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo Display: server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu resolution: 1920x1080~60Hz API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.49.0 6.1.11-antix.1-amd64-smp LLVM 11.0.1) Network: Device-1: Realtek driver: rtw89_8852ae Drives: Local Storage: total: 238.47 GiB used: 29.8 GiB (12.5%) Weather: Report: temperature: 20.34 C (69 F) conditions: clear sky Locale: Greenville, SC, USA current time: Mon 20 Feb 2023 05:20:30 PM EST (America/New_York) Source: OpenWeatherMap.org Info: Processes: 260 Uptime: 2m Memory: 7.11 GiB used: 626.7 MiB (8.6%) Shell: Bash pinxi: 3.3.25-2sudo ps_mem.py Private + Shared = RAM used Program 76.0 KiB + 14.5 KiB = 90.5 KiB pause 92.0 KiB + 16.5 KiB = 108.5 KiB runit 92.0 KiB + 18.5 KiB = 110.5 KiB bpfilter_umh 104.0 KiB + 18.5 KiB = 122.5 KiB runsvdir 124.0 KiB + 22.5 KiB = 146.5 KiB svlogd 196.0 KiB + 24.5 KiB = 220.5 KiB gpm 212.0 KiB + 30.5 KiB = 242.5 KiB atd 284.0 KiB + 31.5 KiB = 315.5 KiB acpid 400.0 KiB + 123.5 KiB = 523.5 KiB dbus-launch 360.0 KiB + 240.5 KiB = 600.5 KiB icewm-session 372.0 KiB + 261.5 KiB = 633.5 KiB udevil 460.0 KiB + 208.5 KiB = 668.5 KiB rpcbind 424.0 KiB + 471.0 KiB = 895.0 KiB avahi-daemon (2) 588.0 KiB + 354.0 KiB = 942.0 KiB getty (4) 624.0 KiB + 392.5 KiB = 1.0 MiB devmon 576.0 KiB + 504.5 KiB = 1.1 MiB gconfd-2 816.0 KiB + 433.0 KiB = 1.2 MiB dbus-daemon (2) 768.0 KiB + 495.5 KiB = 1.2 MiB saned 836.0 KiB + 494.5 KiB = 1.3 MiB desktop-session 1.3 MiB + 498.5 KiB = 1.8 MiB sudo 1.6 MiB + 270.5 KiB = 1.8 MiB udevd 1.8 MiB + 85.5 KiB = 1.9 MiB elogind 1.6 MiB + 456.5 KiB = 2.0 MiB ntpd 1.6 MiB + 487.5 KiB = 2.1 MiB runsv (25) 1.7 MiB + 532.5 KiB = 2.2 MiB bash 1.9 MiB + 421.5 KiB = 2.3 MiB bluetoothd 3.3 MiB + 320.5 KiB = 3.6 MiB connmand 4.0 MiB + 73.5 KiB = 4.1 MiB rsyslogd 4.5 MiB + 30.5 KiB = 4.5 MiB haveged 4.2 MiB + 777.5 KiB = 4.9 MiB wpa_supplicant 4.6 MiB + 721.5 KiB = 5.3 MiB dhclient 5.5 MiB + 1.1 MiB = 6.7 MiB conky 5.5 MiB + 2.5 MiB = 8.0 MiB icewm 4.1 MiB + 4.0 MiB = 8.1 MiB volumeicon 11.1 MiB + 5.6 MiB = 16.7 MiB roxterm 18.2 MiB + 1.3 MiB = 19.5 MiB slimski 64.8 MiB + 19.2 MiB = 84.0 MiB Xorg 381.2 MiB + 25.5 MiB = 406.7 MiB seamonkey --------------------------------- 597.7 MiB =================================--
Brian MasinickFebruary 20, 2023 at 8:29 pm #100190In reply to: What are you “here” with today?
Moderator
Brian Masinick
Yesterday when I updated my system it pulled in a Liquorix kernel update, so I’m trying it out. So far it’s working fine.
Here’s the memory stats when I’m running with this kernel and two open tabs with Version 110.0.5481.100 (Official Build, ungoogled-chromium) custom (64-bit).
sudo ps_mem.py Private + Shared = RAM used Program 92.0 KiB + 12.5 KiB = 104.5 KiB runit 100.0 KiB + 14.5 KiB = 114.5 KiB runsvdir 132.0 KiB + 16.5 KiB = 148.5 KiB svlogd 196.0 KiB + 22.5 KiB = 218.5 KiB gpm 208.0 KiB + 24.5 KiB = 232.5 KiB atd 288.0 KiB + 28.5 KiB = 316.5 KiB acpid 396.0 KiB + 87.5 KiB = 483.5 KiB dbus-launch 368.0 KiB + 170.5 KiB = 538.5 KiB udevil 364.0 KiB + 178.5 KiB = 542.5 KiB icewm-session 476.0 KiB + 133.5 KiB = 609.5 KiB rpcbind 540.0 KiB + 313.0 KiB = 853.0 KiB getty (4) 488.0 KiB + 411.0 KiB = 899.0 KiB avahi-daemon (2) 624.0 KiB + 396.5 KiB = 1.0 MiB devmon 748.0 KiB + 299.5 KiB = 1.0 MiB gconfd-2 340.0 KiB + 957.0 KiB = 1.3 MiB saned (2) 840.0 KiB + 465.5 KiB = 1.3 MiB desktop-session 900.0 KiB + 541.5 KiB = 1.4 MiB at-spi2-registryd 832.0 KiB + 684.5 KiB = 1.5 MiB at-spi-bus-launcher 1.1 MiB + 533.5 KiB = 1.6 MiB dbus-daemon (3) 1.4 MiB + 308.5 KiB = 1.7 MiB sudo 1.7 MiB + 68.5 KiB = 1.8 MiB elogind 1.6 MiB + 250.5 KiB = 1.9 MiB udevd 1.5 MiB + 397.5 KiB = 1.9 MiB ntpd 1.6 MiB + 400.5 KiB = 2.0 MiB runsv (25) 1.8 MiB + 286.5 KiB = 2.1 MiB bluetoothd 2.1 MiB + 58.5 KiB = 2.2 MiB rsyslogd 1.8 MiB + 410.5 KiB = 2.2 MiB connmand 1.7 MiB + 501.5 KiB = 2.2 MiB bash 3.2 MiB + 23.5 KiB = 3.2 MiB haveged 2.5 MiB + 742.5 KiB = 3.3 MiB dhclient 3.7 MiB + 878.5 KiB = 4.5 MiB conky 4.4 MiB + 781.5 KiB = 5.1 MiB wpa_supplicant 4.5 MiB + 991.5 KiB = 5.5 MiB slimski 4.3 MiB + 3.2 MiB = 7.5 MiB volumeicon 5.8 MiB + 2.1 MiB = 7.9 MiB icewm 10.3 MiB + 4.9 MiB = 15.3 MiB roxterm 39.1 MiB + 22.4 MiB = 61.5 MiB Xorg 372.8 MiB + 177.1 MiB = 550.0 MiB chrome (15) --------------------------------- 695.8 MiB =================================Here is the information update today:
pinxi -bcw System: Host: brian-antix-hp-14fq1025nr Kernel: 6.1.12-3-liquorix-amd64 arch: x86_64 bits: 64 Desktop: IceWM v: 3.3.1 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) CPU: Info: 6-core AMD Ryzen 5 5500U with Radeon Graphics [MT MCP] speed (MHz): avg: 2041 min/max: 1400/4056 Graphics: Device-1: AMD Lucienne driver: amdgpu v: kernel Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu resolution: 1920x1080~60Hz API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.49.0 6.1.12-3-liquorix-amd64 LLVM 11.0.1) Network: Device-1: Realtek driver: rtw89_8852ae Drives: Local Storage: total: 238.47 GiB used: 29.86 GiB (12.5%) Weather: Report: temperature: 20.93 C (70 F) conditions: clear sky Locale: Greenville, SC, USA current time: Mon 20 Feb 2023 03:29:19 PM EST (America/New_York) Source: OpenWeatherMap.org Info: Processes: 268 Uptime: 23m Memory: 7.1 GiB used: 1 GiB (14.1%) Shell: Bash pinxi: 3.3.25-2--
Brian MasinickFebruary 20, 2023 at 3:10 pm #100137In reply to: What are you “here” with today?
Moderator
caprea
Shortly after booting, antiX23 runit, 6.1.11-antix-kernel, rox-icewm
$ sudo ps_mem.py [sudo] Passwort für helga: Private + Shared = RAM used Program 108.0 KiB + 18.5 KiB = 126.5 KiB runit 128.0 KiB + 22.5 KiB = 150.5 KiB runsvdir 148.0 KiB + 28.5 KiB = 176.5 KiB seatd 92.0 KiB + 191.5 KiB = 283.5 KiB startup (3) 296.0 KiB + 108.5 KiB = 404.5 KiB svlogd (3) 356.0 KiB + 128.5 KiB = 484.5 KiB dbus-launch 384.0 KiB + 226.5 KiB = 610.5 KiB udevil 360.0 KiB + 275.5 KiB = 635.5 KiB icewm-session 460.0 KiB + 451.0 KiB = 911.0 KiB avahi-daemon (2) 760.0 KiB + 289.5 KiB = 1.0 MiB devmon 820.0 KiB + 294.5 KiB = 1.1 MiB desktop-session 836.0 KiB + 353.0 KiB = 1.2 MiB dbus-daemon (2) 988.0 KiB + 555.5 KiB = 1.5 MiB getty (7) 1.3 MiB + 382.5 KiB = 1.7 MiB runsv (15) 1.0 MiB + 839.0 KiB = 1.8 MiB sudo (2) 1.5 MiB + 333.5 KiB = 1.8 MiB bash 1.8 MiB + 459.5 KiB = 2.2 MiB udevd 1.4 MiB + 933.5 KiB = 2.3 MiB pipewire-pulse 2.1 MiB + 366.5 KiB = 2.4 MiB bluetoothd 3.6 MiB + 222.5 KiB = 3.8 MiB connmand 3.3 MiB + 615.5 KiB = 3.9 MiB cupsd 4.1 MiB + 691.5 KiB = 4.8 MiB conky 4.0 MiB + 1.4 MiB = 5.4 MiB pipewire 4.1 MiB + 1.5 MiB = 5.6 MiB slimski 3.0 MiB + 3.6 MiB = 6.6 MiB volumeicon 6.8 MiB + 512.5 KiB = 7.3 MiB wpa_supplicant 5.1 MiB + 2.5 MiB = 7.6 MiB icewm 7.9 MiB + 2.0 MiB = 9.9 MiB wireplumber 11.4 MiB + 5.4 MiB = 16.7 MiB roxterm 23.3 MiB + 4.1 MiB = 27.5 MiB rox 85.2 MiB + 1.9 MiB = 87.0 MiB Xorg --------------------------------- 206.8 MiB =================================and now antiX23 runit, 5.10.142-antix-kernel, rox-icwm
$ sudo ps_mem.py [sudo] Passwort für helga: Private + Shared = RAM used Program 108.0 KiB + 18.5 KiB = 126.5 KiB runit 128.0 KiB + 21.5 KiB = 149.5 KiB runsvdir 140.0 KiB + 29.5 KiB = 169.5 KiB seatd 92.0 KiB + 198.5 KiB = 290.5 KiB startup (3) 304.0 KiB + 108.5 KiB = 412.5 KiB svlogd (3) 360.0 KiB + 142.5 KiB = 502.5 KiB dbus-launch 392.0 KiB + 243.5 KiB = 635.5 KiB udevil 360.0 KiB + 281.5 KiB = 641.5 KiB icewm-session 456.0 KiB + 457.0 KiB = 913.0 KiB avahi-daemon (2) 768.0 KiB + 317.5 KiB = 1.1 MiB devmon 832.0 KiB + 299.5 KiB = 1.1 MiB desktop-session 832.0 KiB + 364.0 KiB = 1.2 MiB dbus-daemon (2) 988.0 KiB + 520.5 KiB = 1.5 MiB getty (7) 1.4 MiB + 374.5 KiB = 1.7 MiB runsv (15) 1.5 MiB + 340.5 KiB = 1.8 MiB bash 1.0 MiB + 872.0 KiB = 1.8 MiB sudo (2) 1.4 MiB + 931.5 KiB = 2.3 MiB pipewire-pulse 2.1 MiB + 360.5 KiB = 2.4 MiB bluetoothd 936.0 KiB + 1.7 MiB = 2.6 MiB udevd (2) 2.2 MiB + 674.5 KiB = 2.8 MiB conky 3.5 MiB + 238.5 KiB = 3.8 MiB connmand 3.3 MiB + 611.5 KiB = 3.9 MiB cupsd 4.0 MiB + 1.4 MiB = 5.3 MiB pipewire 4.7 MiB + 1.4 MiB = 6.1 MiB slimski 2.9 MiB + 3.6 MiB = 6.5 MiB volumeicon 6.9 MiB + 519.5 KiB = 7.4 MiB wpa_supplicant 5.1 MiB + 2.5 MiB = 7.6 MiB icewm 8.0 MiB + 2.0 MiB = 10.0 MiB wireplumber 11.4 MiB + 5.4 MiB = 16.8 MiB roxterm 21.6 MiB + 4.1 MiB = 25.7 MiB rox 81.5 MiB + 1.8 MiB = 83.3 MiB Xorg --------------------------------- 200.6 MiB =================================finally antiX23 runit, 4.19.0-256-antix, surprise
$ sudo ps_mem.py [sudo] Passwort für helga: Private + Shared = RAM used Program 112.0 KiB + 18.5 KiB = 130.5 KiB runit 128.0 KiB + 21.5 KiB = 149.5 KiB runsvdir 144.0 KiB + 29.5 KiB = 173.5 KiB seatd 96.0 KiB + 191.5 KiB = 287.5 KiB startup (3) 304.0 KiB + 112.5 KiB = 416.5 KiB svlogd (3) 376.0 KiB + 147.5 KiB = 523.5 KiB dbus-launch 384.0 KiB + 243.5 KiB = 627.5 KiB udevil 368.0 KiB + 277.5 KiB = 645.5 KiB icewm-session 464.0 KiB + 451.0 KiB = 915.0 KiB avahi-daemon (2) 764.0 KiB + 306.5 KiB = 1.0 MiB devmon 816.0 KiB + 293.5 KiB = 1.1 MiB desktop-session 820.0 KiB + 361.0 KiB = 1.2 MiB dbus-daemon (2) 988.0 KiB + 522.5 KiB = 1.5 MiB getty (7) 1.4 MiB + 385.5 KiB = 1.7 MiB runsv (15) 1.0 MiB + 873.0 KiB = 1.9 MiB sudo (2) 1.6 MiB + 333.5 KiB = 1.9 MiB bash 1.7 MiB + 469.5 KiB = 2.2 MiB udevd 2.1 MiB + 366.5 KiB = 2.4 MiB bluetoothd 1.5 MiB + 984.5 KiB = 2.4 MiB pipewire-pulse 2.1 MiB + 696.5 KiB = 2.8 MiB conky 3.6 MiB + 229.5 KiB = 3.9 MiB connmand 3.3 MiB + 605.5 KiB = 3.9 MiB cupsd 3.9 MiB + 1.4 MiB = 5.3 MiB pipewire 4.8 MiB + 1.4 MiB = 6.2 MiB slimski 2.8 MiB + 3.6 MiB = 6.5 MiB volumeicon 6.8 MiB + 522.5 KiB = 7.3 MiB wpa_supplicant 5.1 MiB + 2.5 MiB = 7.6 MiB icewm 7.8 MiB + 2.0 MiB = 9.9 MiB wireplumber 11.3 MiB + 5.4 MiB = 16.7 MiB roxterm 21.3 MiB + 4.2 MiB = 25.5 MiB rox 94.0 MiB + 1.8 MiB = 95.8 MiB Xorg --------------------------------- 212.3 MiB=================================
wireplumber, pipewire, pipewire-puls, bluetoothhd are activated here in all three cases and using together about 20 mb.
- This reply was modified 2 months, 2 weeks ago by caprea.
-
AuthorSearch Results
Search Results for 'bluetooth'
-
Search Results
-
Topic: keyboard mapping
Not sure if this is the correct mailbox to post my request, if not I’ll be fast to redirect with my apologies.
The problem is that I need to remap a few keys, in order to add a few polish on my Italian keyboard.
The reason is that I’m studying polish, but I don’t want to switch to the Polish keyboard. It will be enough to add just a few special characters (ążćśłźę).
On my W10 system I install the AutoHotkey program with a AHK file at startup that maps a few alt-gr combinations to the desired chars.
Something like:
alt-gr a -> ą
alt-gr e -> ę
Bytw, autohokey is a handy program that makes much much more.
So, questions are:
1) how to map desired chars?
2) is there a AutoHotkey linux equivalent to be used on Antix?$ inxi -zv7 System: Kernel: 5.10.142-antix.2-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: IceWM v: 3.0.1 dm: slimski v: 1.5.0 Distro: antiX-22_x64-full Grup Yorum 18 October 2022 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Other-vm? System: FUJITSU SIEMENS product: ESPRIMO Mobile V5535 v: V1.03 serial: <superuser required> Mobo: FUJITSU SIEMENS model: Z17M2.0 v: V1.03 serial: <superuser required> BIOS: Phoenix v: 1.06 date: 05/30/08 Battery: ID-1: BAT0 charge: 15.8 Wh (55.2%) condition: 28.6/48.8 Wh (58.6%) volts: 12.4 min: 11.1 model: AAIN SMP SDI e02741401C14C08500080 type: Li-ion serial: <filter> status: charging Memory: RAM: total: 1.69 GiB used: 412.9 MiB (23.9%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: dual core model: Intel Core2 Duo T5750 bits: 64 type: MCP smt: <unsupported> arch: Core2 Merom rev: D cache: L1: 128 KiB L2: 2 MiB Speed (MHz): avg: 1503 high: 1582 min/max: 1000/2000 cores: 1: 1582 2: 1425 bogomips: 7993 Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts est fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge pni pse pse36 pti rep_good sep sse sse2 ssse3 syscall tm tm2 tsc vme xtpr Graphics: Device-1: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter vendor: Fujitsu Solutions driver: N/A bus-ID: 01:00.0 chip-ID: 1039:6351 class-ID: 0300 Display: server: X.Org v: 1.20.11 driver: X: loaded: vesa unloaded: fbdev,modesetting alternate: sis gpu: N/A display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 271x203mm (10.67x7.99") s-diag: 339mm (13.33") Monitor-1: default res: 1024x768 size: N/A modes: N/A OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1 direct render: Yes Audio: Device-1: Silicon Integrated Systems [SiS] Azalia Audio vendor: Fujitsu Solutions driver: snd_hda_intel v: kernel bus-ID: 00:0f.0 chip-ID: 1039:7502 class-ID: 0403 Sound Server-1: ALSA v: k5.10.142-antix.2-amd64-smp running: yes Network: Device-1: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter vendor: Fujitsu Solutions driver: sis190 v: 1.4 port: 1080 bus-ID: 00:04.0 chip-ID: 1039:0191 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter driver: ath5k v: kernel pcie: speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 168c:001c class-ID: 0200 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 232.89 GiB used: 4.9 GiB (2.1%) ID-1: /dev/sda vendor: Fujitsu model: MHY2250BH size: 232.89 GiB speed: <unknown> type: N/A serial: <filter> rev: 000B scheme: MBR Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GSA-T40N rev: JW02 dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running Partition: ID-1: / size: 225.58 GiB used: 4.9 GiB (2.2%) fs: ext4 dev: /dev/sda1 label: rootantiX22 uuid: dc4657ca-05ae-4649-a6e4-d40a87488114 Swap: ID-1: swap-1 type: partition size: 2.62 GiB used: 12 KiB (0.0%) priority: -2 dev: /dev/sda2 label: swapantiX uuid: 55bd0041-eb97-4cb6-85eb-0d46e0b33564 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed or root hub ports: 8 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: Full speed or root hub ports: 4 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-3: 3-0:1 info: Full speed or root hub ports: 4 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 3-1:2 info: Belkin MI-2150 Trust Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 1241:1166 class-ID: 0301 Sensors: System Temperatures: cpu: 55.0 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 137 Uptime: 35m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Packages: apt: 1587 Shell: Bash v: 5.1.4 running-in: roxterm inxi: 3.3.19- This topic was modified 2 months, 2 weeks ago by salvuzzo. Reason: Adding inxi result