-
Search Results
-
In reply to: My video Camera has stopped working SOLVED
marcelocripe
Some devices or programs start working after pulseaudio is installed.
Namida12, I am returning here to correct some information from May 05, 2022.
The experiences I had with pulseaudio were not good. On 7 computers that I tested, on 3 computers the sound worked perfectly with pulseaudio in the programs that the audio didn’t work, but it was only before restarting antiX, after restarting, antiX was silent, there was no sound, not even in the browser Firefox ESR web browser and not an MP3 video or audio file. On the other 4 computers the sound worked perfectly with pulseaudio in the programs that the audio didn’t work, so my experience was traumatic with pulseaudio and I don’t have confidence in this solution.Is there any way to poll antiX-21 users, to find someone who successfully uses an external webcam for the Google Meet you say you need for conferencing with family? If so, you could ask which make & model of webcam they’re using. If it’s different, then you could test that alternate webcam. If it’s the same logitech as yours, then you could inquire for the details of their setup.
We could create several topics, where each topic reports the Hardware that works well with antiX, both for Webcam and for other Hardwares, such as: Bluetooth, Video Card, Sound Card, Ethernet or Wi-Fi Network Card, etc.
– – – – –
Some devices or programs start working after pulseaudio is installed.
Namida12, eu estou retornando aqui para corrigir algumas a informações do dia 05 de maio de 2022.
As experiências que eu tive com o pulseaudio não foram boas. Em 7 computadores que testei, em 3 computadores o som funcionou perfeitamente com o pulseaudio nos programas que o áudio não funcionava, mas foi só até antes de reiniciar o antiX, depois da reinicialização, o antiX ficou mudo, não havia som, nem no navegador de internet Firefox ESR e nem em um arquivo de vídeo ou de áudio MP3. Nos outros 4 computadores o som funcionou perfeitamente com o pulseaudio nos programas que o áudio não funcionava, por tanto, a minha experiência foi traumática com o pulseaudio e eu não possuo confiança nesta solução.Is there any way to poll antiX-21 users, to find someone who successfully uses an external webcam for the Google Meet you say you need for conferencing with family? If so, you could ask which make & model of webcam they’re using. If it’s different, then you could test that alternate webcam. If it’s the same logitech as yours, then you could inquire for the details of their setup.
Nós poderíamos criar vários tópicos, onde cada tópico relata o Hardware que fuciona bem com o antiX, tanto para Webcam quanto para outros Hardwares, como por exemplo: Bluetooth, Placa de Vídeo, Placa de Som, Placa de Rede Ethernet ou Wi-Fi, etc.
Topic: Hi antiX on a 2009 iMac
Articules
Greetings – antiX installed and looking neat.
$ inxi -Fxxxrz System: Kernel: 5.10.57-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: IceWM 2.9.7 vt: 7 dm: N/A Distro: antiX-21_x64-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Desktop System: Apple product: iMac9,1 v: 1.0 serial: <filter> Chassis: type: 13 v: Mac-F2218EC8 serial: <filter> Mobo: Apple model: Mac-F2218EC8 serial: <filter> UEFI: Apple v: IM91.88Z.008D.B08.0904271717 date: 04/27/09 CPU: Info: Dual Core model: Intel Core2 Duo E8135 bits: 64 type: MCP arch: Penryn rev: A cache: L2: 6 MiB flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 10613 Speed: 2552 MHz min/max: 1596/2660 MHz Core speeds (MHz): 1: 2552 2: 1909 Graphics: Device-1: NVIDIA C79 [GeForce 9400] vendor: Apple iMac 9 1 driver: nouveau v: kernel bus-ID: 03:00.0 chip-ID: 10de:0867 class-ID: 0300 Device-2: Apple Built-in iSight type: USB driver: uvcvideo bus-ID: 1-4:3 chip-ID: 05ac:8502 class-ID: 0e02 serial: <filter> Display: x11 server: X.Org 1.20.11 driver: loaded: modesetting unloaded: fbdev,vesa resolution: 1680x1050~60Hz s-dpi: 96 OpenGL: renderer: NVAC v: 3.3 Mesa 20.3.5 direct render: Yes Audio: Device-1: NVIDIA MCP79 High Definition Audio driver: snd_hda_intel v: kernel bus-ID: 00:08.0 chip-ID: 10de:0ac0 class-ID: 0403 Sound Server-1: ALSA v: k5.10.57-antix.1-amd64-smp running: yes Network: Device-1: NVIDIA MCP79 Ethernet driver: forcedeth v: kernel port: 21e0 bus-ID: 00:0a.0 chip-ID: 10de:0ab0 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Broadcom BCM4322 802.11a/b/g/n Wireless LAN vendor: Apple AirPort Extreme driver: wl v: kernel port: 1000 bus-ID: 04:00.0 chip-ID: 14e4:432b class-ID: 0280 IF: wlan0 state: up mac: <filter> Bluetooth: Device-1: Apple Built-in Bluetooth 2.0+EDR HCI type: USB driver: btusb v: 0.8 bus-ID: 4-1.1:3 chip-ID: 05ac:8215 class-ID: fe01 serial: <filter> Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: running rfk-block: hardware: no software: yes address: <filter> Drives: Local Storage: total: 298.09 GiB used: 4.55 GiB (1.5%) ID-1: /dev/sda vendor: Hitachi model: HDT721032SLA380 size: 298.09 GiB speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A36A scheme: GPT Partition: ID-1: / size: 289.51 GiB used: 4.55 GiB (1.6%) fs: ext4 dev: /dev/sda2 ID-2: /boot/efi size: 252 MiB used: 274 KiB (0.1%) fs: vfat dev: /dev/sda1 Swap: ID-1: swap-1 type: partition size: 2.62 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3 Sensors: System Temperatures: cpu: 40.0 C mobo: N/A gpu: nouveau temp: 57.0 C Fan Speeds (RPM): cpu: 1195 Repos: Packages: apt: 1577 Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://mxlinux.mirrors.uk2.net/packages/antix/bullseye bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.uk.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.uk.debian.org/debian/ bullseye main contrib non-free 2: deb http://security.debian.org/ bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main No active apt repos in: /etc/apt/sources.list.d/various.list Info: Processes: 156 Uptime: 14m wakeups: 1 Memory: 1.69 GiB used: 722.5 MiB (41.8%) Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4 running-in: roxterm inxi: 3.3.06- This topic was modified 12 months ago by Articules. Reason: code things
- This topic was modified 12 months ago by Articules.
Articules
it rhymes with kneesIn reply to: Change behaviour of wireless toggle button
madibi
I don’t have your keyboard, I guess I should rather try the following:
‘xmodmap -e “keycode 247 = XF86WLAN’ (for the wifi)
(for the bluetooth the command should be:
‘xmodmap -e “keycode 247 = XF86Bluetooth’ )please try it and let me know 🙂
m
- This reply was modified 12 months ago by madibi.
TheBigBadBoy
Hello !
I’m just wondering if it was possible to change the behaviour of the wireless toggle button (on my keyboard, it is a airplane logo).
In my case, I want to retrieve the last state of “connection”. But now, every time I toggle off wireless mode the Bluetooth keeps turning ON (even if Bluetooth was not enabled before).
I want the button to do the same as “Right click on Wi-Fi status from connman -> (un)tick ‘Offline mode'”.
I also know it is possible since it is what the button does on Windows (dual boot).
In reply to: AntiX 21 freezes randomly
Gloubi
Before AntiX I had Windows 8.1 and there wasn’t any problem. I’m sure it’s a software problem.
Here’s the output of inxi -zv8. I’m now on JWM to test if IceWM is the problem.
System: Kernel: 5.10.57-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 10.2.1 parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.57-antix.1-amd64-smp root=UUID=9510c20b-7506-4b8b-b4e0-3e3ce7132294 ro quiet Desktop: JWM 2.4.0 vt: 7 dm: N/A Distro: antiX-21_x64-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: ASUSTeK product: X202E v: 1.0 serial: <filter> Mobo: ASUSTeK model: X202E v: 1.0 serial: <filter> UEFI: American Megatrends v: X202E.208 date: 02/04/2013 Battery: ID-1: BAT0 charge: 16.2 Wh (55.5%) condition: 29.2/38.0 Wh (76.8%) volts: 7.4 min: 7.4 model: ASUSTek X202-51 type: Li-ion serial: N/A status: Charging Memory: RAM: total: 1.76 GiB used: 837.7 MiB (46.5%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Info: Dual Core model: Intel Core i3-3217U bits: 64 type: MT MCP arch: Ivy Bridge family: 6 model-id: 3A (58) stepping: 9 microcode: 21 cache: L2: 3 MiB bogomips: 14367 Speed: 1740 MHz min/max: 800/1800 MHz Core speeds (MHz): 1: 1740 2: 1796 3: 1661 4: 1797 Flags: acpi aperfmperf apic arat arch_perfmon avx bts clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept erms est f16c flexpriority flush_l1d fpu fsgsbase fxsr ht ibpb ibrs ida lahf_lm lm mca mce md_clear mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts rdtscp rep_good sep smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_deadline_timer vme vmx vnmi vpid x2apic xsave xsaveopt xtopology xtpr Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable Type: mds mitigation: Clear CPU buffers; SMT vulnerable Type: meltdown mitigation: PTI Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: Intel 3rd Gen Core processor Graphics vendor: ASUSTeK driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:0166 class-ID: 0300 Device-2: IMC Networks USB2.0 UVC HD Webcam type: USB driver: uvcvideo bus-ID: 1-1.2:4 chip-ID: 13d3:5188 class-ID: 0e02 serial: <filter> Display: x11 server: X.Org 1.20.11 driver: loaded: modesetting unloaded: fbdev,vesa display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0") s-diag: 414mm (16.3") Monitor-1: LVDS-1 res: 1366x768 hz: 60 dpi: 136 size: 256x144mm (10.1x5.7") diag: 294mm (11.6") OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2) v: 4.2 Mesa 20.3.5 compat-v: 3.0 direct render: Yes Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: ASUSTeK VivoBook X202EV driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20 class-ID: 0403 Sound Server-1: ALSA v: k5.10.57-antix.1-amd64-smp running: yes Network: Device-1: Qualcomm Atheros AR9485 Wireless Network Adapter vendor: AzureWave driver: ath9k v: kernel modules: wl port: f040 bus-ID: 02:00.0 chip-ID: 168c:0032 class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> type: dynamic mngtmpaddr scope: global IP v6: <filter> scope: link Device-2: Qualcomm Atheros AR8162 Fast Ethernet vendor: ASUSTeK driver: alx v: kernel port: e000 bus-ID: 03:00.0 chip-ID: 1969:1090 class-ID: 0200 IF: eth0 state: down mac: <filter> WAN IP: <filter> Bluetooth: Device-1: IMC Networks Atheros AR3012 Bluetooth 4.0 Adapter type: USB driver: btusb v: 0.8 bus-ID: 1-1.1:6 chip-ID: 13d3:3362 class-ID: e001 serial: <filter> Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: running rfk-block: hardware: no software: yes address: <filter> Info: acl-mtu: 1022:8 sco-mtu: 183:5 link-policy: rswitch hold sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 298.09 GiB used: 15.2 GiB (5.1%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/sda maj-min: 8:0 vendor: Hitachi model: HTS543232A7A384 size: 298.09 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: A60W scheme: GPT Message: No optical or floppy data found. Partition: ID-1: / raw-size: 295.08 GiB size: 289.39 GiB (98.07%) used: 14.93 GiB (5.2%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: rootantiX21 uuid: 9510c20b-7506-4b8b-b4e0-3e3ce7132294 ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: EFI System uuid: 9DC0-7167 Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 2.75 GiB used: 274.5 MiB (9.7%) priority: -2 dev: /dev/sda3 maj-min: 8:3 label: swapantiX uuid: 6512290a-43db-4d3a-a1df-6f85b0e8b8e9 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 8087:0024 class-ID: 0900 Device-1: 1-1.1:6 info: IMC Networks Atheros AR3012 Bluetooth 4.0 Adapter type: Bluetooth driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 13d3:3362 class-ID: e001 serial: <filter> Device-2: 1-1.2:4 info: IMC Networks USB2.0 UVC HD Webcam type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 13d3:5188 class-ID: 0e02 serial: <filter> Device-3: 1-1.3:5 info: Atmel Atmel maXTouch Digitizer type: HID driver: hid-generic,hid-multitouch,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 03eb:8417 class-ID: 0300 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 8087:0024 class-ID: 0900 Hub-5: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-6: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 58.0 C mobo: N/A Fan Speeds (RPM): cpu: 3300 Repos: Packages: apt: 1751 lib: 875 Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://mirror.tiguinet.net/mx/packages/antix/bullseye bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.be.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.be.debian.org/debian/ bullseye main contrib non-free 2: deb http://security.debian.org/ bullseye-security main contrib non-free No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 of 159 1: cpu: 17.1% command: palemoon pid: 2609 mem: 376.5 MiB (20.8%) 2: cpu: 6.6% command: soffice.bin pid: 11903 mem: 121.3 MiB (6.7%) 3: cpu: 3.0% command: xorg pid: 2107 mem: 36.2 MiB (2.0%) 4: cpu: 1.7% command: roxterm pid: 15176 mem: 30.2 MiB (1.6%) 5: cpu: 0.5% command: conky pid: 2360 mem: 2.82 MiB (0.1%) Memory top: 5 of 159 1: mem: 376.5 MiB (20.8%) command: palemoon pid: 2609 cpu: 17.1% 2: mem: 121.3 MiB (6.7%) command: soffice.bin pid: 11903 cpu: 6.6% 3: mem: 36.2 MiB (2.0%) command: xorg pid: 2107 cpu: 3.0% 4: mem: 30.2 MiB (1.6%) command: roxterm pid: 15176 cpu: 1.7% 5: mem: 7.43 MiB (0.4%) command: zzzfm pid: 2252 cpu: 0.0% Info: Processes: 159 Uptime: 1h 24m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4 running-in: roxterm inxi: 3.3.06Topic: Mac mini Specs
Noman01
Back again with my other setup specs.
System: Kernel: 4.9.0-294-antix.1-486-smp i686 bits: 32 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-4.9.0-294-antix.1-486-smp
root=UUID=db6d3f87-6e2b-4bea-b79d-683d0b398d1c ro quiet
Desktop: IceWM 2.9.7 info: tint2 vt: 7 dm: N/A
Distro: antiX-21_386-base Grup Yorum 31 October 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: Apple product: Macmini2,1 v: 1.0 serial: <filter> Chassis:
type: 4 v: Mac-F4208EAA serial: <filter>
Mobo: Apple model: Mac-F4208EAA v: PVT serial: <filter> UEFI: Apple
v: MM21.88Z.009A.B00.0706281359 date: 06/28/07
Battery: Message: No system battery data found. Is one present?
Memory: RAM: total: 951 MiB used: 218.9 MiB (23.0%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots: Permissions: Unable to run dmidecode. Root privileges required.
CPU: Info: Dual Core model: Intel Core2 T7200 bits: 64 type: MCP arch: Core Merom family: 6
model-id: F (15) stepping: 6 microcode: D1 cache: L2: 4 MiB bogomips: 8000
Speed: 1000 MHz min/max: 1000/2000 MHz Core speeds (MHz): 1: 1000 2: 1000
Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de
ds_cpl dtes64 dtherm dts est fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nx pae
pat pbe pdcm pebs pge pni pse pse36 sep ss sse sse2 ssse3 tm tm2 tpr_shadow tsc vme vmx
xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf status: Vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown status: Vulnerable
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Mobile 945GM/GMS 943/940GML Express Integrated Graphics driver: i915
v: kernel bus-ID: 00:02.0 chip-ID: 8086:27a2 class-ID: 0300
Display: x11 server: X.Org 1.20.11 driver: loaded: intel
unloaded: fbdev,modesetting,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1440×900 s-dpi: 96 s-size: 380x238mm (15.0×9.4″)
s-diag: 448mm (17.7″)
Monitor-1: VGA1 res: 1440×900 hz: 60 dpi: 89 size: 410x270mm (16.1×10.6″)
diag: 491mm (19.3″)
OpenGL: renderer: Mesa DRI Intel 945GM x86/MMX/SSE2 v: 1.4 Mesa 20.3.5
direct render: Yes
Audio: Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: SigmaTel STAC9221 Codec
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:27d8 class-ID: 0403
Sound Server-1: ALSA v: k4.9.0-294-antix.1-486-smp running: yes
Network: Device-1: Marvell 88E8053 PCI-E Gigabit Ethernet driver: sky2 v: 1.30 port: 1000
bus-ID: 01:00.0 chip-ID: 11ab:4362 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter
vendor: Apple AirPort Extreme driver: ath5k v: kernel port: 1000 bus-ID: 02:00.0
chip-ID: 168c:001c class-ID: 0200
IF: wlan0 state: up mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> scope: global
IP v6: <filter> type: dynamic mngtmpaddr scope: global
IP v6: <filter> scope: link
WAN IP: <filter>
Bluetooth: Message: No bluetooth data found.
Logical: Message: No logical block device data found.
RAID: Message: No RAID data found.
Drives: Local Storage: total: 111.79 GiB used: 3.64 GiB (3.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Hitachi model: HTS541612J9SA00 size: 111.79 GiB
block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s type: N/A serial: <filter>
rev: C7MP scheme: GPT
Optical-1: /dev/sr0 vendor: PIONEER model: DVD-RW DVR-K06 rev: Q614
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r
state: running
Partition: ID-1: / raw-size: 110.03 GiB size: 107.75 GiB (97.92%) used: 3.64 GiB (3.4%) fs: ext4
dev: /dev/sda2 maj-min: 8:2 label: rootantiX21
uuid: db6d3f87-6e2b-4bea-b79d-683d0b398d1c
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 302 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1 label: EFI System uuid: 9E22-E56E
Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100)
ID-1: swap-1 type: partition size: 1.5 GiB used: 0 KiB (0.0%) priority: -1
dev: /dev/sda3 maj-min: 8:3 label: swapantiX uuid: 056b7f1f-299e-4720-9856-d37c30ed89ce
Unmounted: Message: No unmounted partitions found.
USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-6:2 info: Apple Keyboard Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 300mA
chip-ID: 05ac:1005 class-ID: 0900
Device-1: 1-6.2:4 info: Apple Aluminum Mini Keyboard (ANSI) type: Keyboard,HID
driver: apple,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 20mA
chip-ID: 05ac:021d class-ID: 0300
Device-2: 1-6.3:6 info: Apple Mighty Mouse [Mitsumi M1152] type: Mouse
driver: apple,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA
chip-ID: 05ac:0304 class-ID: 0301
Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip-ID: 1d6b:0001 class-ID: 0900
Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip-ID: 1d6b:0001 class-ID: 0900
Hub-5: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip-ID: 1d6b:0001 class-ID: 0900
Hub-6: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip-ID: 1d6b:0001 class-ID: 0900
Device-1: 5-1:2 info: Apple Bluetooth HCI MacBookPro (HID mode) type: Keyboard,Mouse
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip-ID: 05ac:1000
class-ID: 0301
Device-2: 5-2:3 info: Apple Built-in IR Receiver type: HID driver: appleir,usbhid
interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 05ac:8240 class-ID: 0300
Sensors: System Temperatures: cpu: 50.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: Packages: apt: 1251 lib: 603
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http: //mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye bullseye main nosystemd nonfree
Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list
1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http: //ftp.us.debian.org/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http: //ftp.de.debian.org/debian/ bullseye main contrib non-free
2: deb http: //security.debian.org/ bullseye-security main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Processes: CPU top: 5 of 152
1: cpu: 1.5% command: gtkdialog pid: 4322 mem: 25.6 MiB (2.6%)
2: cpu: 0.5% command: xorg pid: 1776 mem: 37.4 MiB (3.9%)
3: cpu: 0.4% command: tor pid: 1832 mem: 29.7 MiB (3.1%)
4: cpu: 0.4% command: conky pid: 2049 mem: 8.57 MiB (0.9%)
5: cpu: 0.2% command: init pid: 1 mem: 1.45 MiB (0.1%)
Memory top: 5 of 152
1: mem: 37.4 MiB (3.9%) command: xorg pid: 1776 cpu: 0.5%
2: mem: 29.7 MiB (3.1%) command: tor pid: 1832 cpu: 0.4%
3: mem: 25.6 MiB (2.6%) command: gtkdialog pid: 4322 cpu: 1.5%
4: mem: 25.5 MiB (2.6%) command: yad pid: 4536 cpu: 0.0%
5: mem: 21.9 MiB (2.3%) command: zzzfm pid: 1940 cpu: 0.1%
Info: Processes: 152 Uptime: 8m wakeups: 1 Init: SysVinit v: 2.96 runlevel: 5 default: 5
tool: service Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
inxi: 3.3.06Topic: IMac Specs
Been working on this for a while using the tips from this forum and though I would share the specs on my setup.
System: Kernel: 4.9.0-294-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 10.2.1 parameters: BOOT_IMAGE=/boot/vmlinuz-4.9.0-294-antix.1-amd64-smp root=UUID=3a611e9c-529a-4d01-b6c6-70d9769dfedc ro quiet Desktop: IceWM 2.9.7 info: tint2 vt: 7 dm: N/A Distro: antiX-21_x64-base Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Desktop System: Apple product: iMac9,1 v: 1.0 serial: <filter> Chassis: type: 13 v: Mac-F2218FA9 serial: <filter> Mobo: Apple model: Mac-F2218FA9 serial: <filter> UEFI: Apple v: IM91.88Z.008D.B08.0904271717 date: 04/27/09 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.61 GiB used: 675.1 MiB (18.3%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Info: Dual Core model: Intel Core2 Duo E8135 bits: 64 type: MCP arch: Penryn family: 6 model-id: 17 (23) stepping: A (10) microcode: A0B cache: L2: 6 MiB bogomips: 10612 Speed: 1596 MHz min/max: 1596/2660 MHz Core speeds (MHz): 1: 1596 2: 1596 Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts est flexpriority fpu fxsr ht kaiser lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge pni pse pse36 rep_good sep ss sse sse2 sse4_1 ssse3 syscall tm tm2 tpr_shadow tsc vme vmx vnmi xsave xtpr Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages Type: l1tf mitigation: PTE Inversion; VMX: EPT disabled Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled Type: meltdown mitigation: PTI Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: NVIDIA C79 [GeForce 9400] vendor: Apple iMac 9 1 driver: nouveau v: kernel bus-ID: 03:00.0 chip-ID: 10de:0867 class-ID: 0300 Device-2: Apple Built-in iSight type: USB driver: uvcvideo bus-ID: 1-4:3 chip-ID: 05ac:8502 class-ID: 0e02 serial: <filter> Display: x11 server: X.Org 1.20.11 compositor: compton v: 1 driver: loaded: modesetting unloaded: fbdev,vesa display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 508x317mm (20.0x12.5") s-diag: 599mm (23.6") Monitor-1: LVDS-1 res: 1920x1200 hz: 60 dpi: 186 size: 262x324mm (10.3x12.8") diag: 417mm (16.4") OpenGL: renderer: NVAC v: 3.3 Mesa 20.3.5 direct render: Yes Audio: Device-1: NVIDIA MCP79 High Definition Audio driver: snd_hda_intel v: kernel bus-ID: 00:08.0 chip-ID: 10de:0ac0 class-ID: 0403 Sound Server-1: ALSA v: k4.9.0-294-antix.1-amd64-smp running: yes Network: Device-1: NVIDIA MCP79 Ethernet driver: forcedeth v: kernel port: 21e0 bus-ID: 00:0a.0 chip-ID: 10de:0ab0 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Broadcom BCM4322 802.11a/b/g/n Wireless LAN vendor: Apple AirPort Extreme driver: wl v: kernel modules: ssb port: 1000 bus-ID: 04:00.0 chip-ID: 14e4:432b class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: global IP v6: <filter> type: dynamic mngtmpaddr scope: global IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Device-1: Apple Built-in Bluetooth 2.0+EDR HCI type: USB driver: btusb v: 0.8 bus-ID: 4-1.1:3 chip-ID: 05ac:8215 class-ID: fe01 serial: <filter> Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: yes address: see --recommends Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 603.38 GiB used: 10.56 GiB (1.8%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/sda maj-min: 8:0 vendor: Hitachi model: HDT721064SLA360 size: 596.17 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A36A scheme: GPT ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Monster Digital model: N/A size: 7.21 GiB block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: PMAP scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Optical-1: /dev/sr0 vendor: OPTIARC model: DVD RW AD-5670S rev: 2AHH dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running Partition: ID-1: / raw-size: 590.41 GiB size: 580.08 GiB (98.25%) used: 6.9 GiB (1.2%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: rootantiX21 uuid: 3a611e9c-529a-4d01-b6c6-70d9769dfedc ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: EFI System uuid: 15CE-591B ID-3: /home/<filter>/GoogleDrive-FT10 raw-size: N/A size: 15 GiB used: 2.91 GiB (19.4%) fs: fuse.rclone source: ERR-102 ID-4: /media/Noman01/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.39%) used: 5.4 MiB (11.2%) fs: vfat dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 7EC0-6187 ID-5: /media/Noman01/antiX-Live-usb raw-size: 7.16 GiB size: 7 GiB (97.77%) used: 772.7 MiB (10.8%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb uuid: 2043e432-fe44-4082-9190-ceb4d541987a Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 5.5 GiB used: 0 KiB (0.0%) priority: -1 dev: /dev/sda3 maj-min: 8:3 label: swapantiX uuid: c9e2e81d-07b6-4b42-91f9-08b68f470018 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 7 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-1:6 info: Monster MONSTER DIGITAL type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 300mA chip-ID: 2897:5450 class-ID: 0806 serial: <filter> Hub-2: 1-3:2 info: Apple Keyboard Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 300mA chip-ID: 05ac:1005 class-ID: 0900 Device-1: 1-3.2:4 info: Apple Aluminum Mini Keyboard (ANSI) type: Keyboard,HID driver: apple,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 20mA chip-ID: 05ac:021d class-ID: 0300 Device-2: 1-4:3 info: Apple Built-in iSight type: Video driver: uvcvideo interfaces: 3 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 05ac:8502 class-ID: 0e02 serial: <filter> Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 7 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 3-5:2 info: Apple Built-in IR Receiver type: HID driver: appleir,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 05ac:8242 class-ID: 0300 Hub-5: 4-0:1 info: Full speed (or root) Hub ports: 5 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-6: 4-1:2 info: Broadcom BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) ports: 3 rev: 2.0 speed: 12 Mb/s chip-ID: 0a5c:4500 class-ID: 0900 Device-1: 4-1.1:3 info: Apple Built-in Bluetooth 2.0+EDR HCI type: Bluetooth driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip-ID: 05ac:8215 class-ID: fe01 serial: <filter> Device-2: 4-4:4 info: Apple Mighty Mouse [Mitsumi M1152] type: Mouse driver: apple,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 05ac:0304 class-ID: 0301 Sensors: System Temperatures: cpu: 84.0 C mobo: 0.0 C gpu: nouveau temp: 45.0 C Fan Speeds (RPM): cpu: 1197 Repos: Packages: apt: 1460 lib: 779 Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http: //mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 1: deb [arch=amd64] https: //brave-browser-apt-release.s3.brave.com/ bullseye main Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http: //ftp.us.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http: //ftp.de.debian.org/debian/ bullseye main contrib non-free 2: deb http: //security.debian.org/ bullseye-security main contrib non-free No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 of 260 1: cpu: 17.0% command: yad pid: 9109 mem: 29.2 MiB (0.7%) 2: cpu: 2.0% command: gtkdialog pid: 9068 mem: 29.0 MiB (0.7%) 3: cpu: 0.2% command: [kworker/u4:82] pid: 7937 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: antixcc.sh started by: bash pid: 8907 mem: 3.29 MiB (0.0%) 5: cpu: 0.0% command: init pid: 1 mem: 2.01 MiB (0.0%) Memory top: 5 of 260 1: mem: 71.7 MiB (1.9%) command: xorg pid: 5372 cpu: 0.0% 2: mem: 68.1 MiB (1.8%) command: rclone pid: 10966 cpu: 0.0% 3: mem: 40.6 MiB (1.0%) command: tor pid: 11683 cpu: 0.0% 4: mem: 29.2 MiB (0.7%) command: yad pid: 9109 cpu: 17.0% 5: mem: 29.0 MiB (0.7%) command: gtkdialog pid: 9068 cpu: 2.0% Info: Processes: 260 Uptime: 11d 20h 56m wakeups: 17 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06- This topic was modified 1 year ago by Noman01.
In reply to: Bluetooth not working
caprea
Bluetooth is turned off in connman per default.
control-centre > network > wifi connect > Status
Look for bluetoothIn reply to: Bluetooth not working
Connection to BlueZ failed
hmmmm..
this means that someone told to antiX to start blueman and that it cannot work.I don’t know which Mac model you have:
– does it have a switch to make the bluetooth on-off?
– when booting can you give some input with your keyboard AFTER the chime and BEFORE that antiX is charged?
– which procedure did you use to install antiX? This later question involves also: I suppose that when you installed antiX your keyboard was working, because of the fact that MacOS was still on the HD. Have you told to the install program to save the changes that you did during the live session?In reply to: Bluetooth not working
chefmyklove
When I booted up I was still running a Mac that was connected to its keyboard. Now that antix is on there, I guess that’s out the window.
I have my Non-apple Bluetooth mouse working but I don’t know how to access whether the computer itself can find the keyboard.
The pic I tried to upload with the error message didn’t load.
It says
Connection to BlueZ failed
“BlueZ daemon is not running blue man-manager cannot continue. This probably means that there were no Bluetooth adapters connected or Bluetooth daemon was not started”
I’m looking for a plug in keyboard but in the meantime I just wonder if I can get it to do anything without it. Is there a software keyboard hiding somewhere in the package? 🤪
In reply to: Bluetooth not working
@Robin
Mac doesn’t have BIOS
With a bluetooth keyboard, in any case with some Mac you can do something:
https://www.cnet.com/tech/computing/how-to-manage-os-x-boot-options-with-wireless-keyboards/m
In reply to: Bluetooth not working
Robin
Which is fine but can I get it set up WITHOUT a keyboard. My keyboard needs Bluetooth.
Allow me a question: How do you access your BIOS settings with only a bluetooth keyboard?
Windows is like a submarine. Open a window and serious problems will start.
Topic: Bluetooth not working
Thank you for all your help getting antix installed. It looks good and I’m excited. Except the Bluetooth keyboard won’t connect.
It’s not a very good photo but it looks like Bluetooth isn’t set up “out of the box”. Which is fine but can I get it set up WITHOUT a keyboard. My keyboard needs Bluetooth.
Am I going to have to get a usb keyboard to get this done or is there a way to proceed withou a keyboard.
In reply to: Difficulty with Desktop, Connman, & wifi
scruffyeagle
After draining the BIOS charge by disconnecting the coin battery inside the Dell Precision M6300 laptop, I was able to disable both wifi & bluetooth in the BIOS; effectively putting the laptop into persistent “airplane mode”.
This change was picked up on, by Connman. Now, when Connman initializes, it recognizes that there’s no wifi, and doesn’t include wifi in the status display. Problem solved. No more repeatedly turning off the wifi.
I think this thread can be marked as “solved”.
Thanks.In reply to: Mouse freeze rox-icewm
ModdIt
Hi sybok,
Best, fastest diagnosis use another mouse and go through available ports. If all ok,
change the battery, should it have one that is and try again.Very fed up with mouse failures, worst of late Logitech. Happy with below, nicely made and good to use.
TECKNET Bluetooth Maus, Alpha 3000 DPI Kabellose Maus Wireless Bluetooth Mouse mit Batterieanzeige für
PC Mac, 5 Verstellbare DPI Level- This reply was modified 1 year ago by ModdIt.
Forum for users of antiX Linux. Mean and Lean and Proudly anti-fascist.
