Search Results for 'boot from iso'

[Member Xecure]

zeh wrote:

I’m correcting the translation on Transifex as well, so you can just use the file over there.

I wish I was as good as the antiX developer. I have no idea how to decode and encode the .tr files or build the gfx-cpio compress file again. I was able to read the files by using cat in terminal, but I have no idea how to really decode them.

I have opted for the older version of initdr and boot present in iso-template to build the ISO (where the error is not present). Unfortunately it lacks some of the nice new 19.4 live functions (like encrypt frugal). Sorry for not being good enough. At least it is as close as I could get it to the antiX 19.4 release.

marcelocripe wrote:

Ao invés disso, eu posso te fazer um outro pedido? Uma nova ISO de 64 bits com kernel semelhante a ISO (antiX-19-legacy-bet2_386-base.iso).

I am not sure what you mean here. Do you want to use an older 4.4 kernel or are you referring to the xorg-legacy configuration? Send me a private message explaining and I will build whatever you tell me (if possible) and link it here. I have everything more or less set up, so it would only be editing two or three files and I should be able to make a new ISO in a few hours.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

[Member Xecure]

I have created an ISO for antiX 19.4 with kernel 5.10 and what I think gives support for RAID. It is not exactly the same as antiX 19.4 (it is using older live boot menus it is has less live capabilities than 19.4, and some different configurations, but it is the best I can do for now. It should have almost the same packages and be almost identical for untrained eye).
pseudo-antiX-19.4-5.10_kernel_x64

When you boot, add the boot parameter
load=all
before booting to the live system so it loads all modules, including the one that supports RAID (hopefully it works).

If after this it doesn’t detect the RAID, I give up. I cannot test it myself, and I am only following advice randomly found in the MX Linux forums.

If you have the time, please check to see if it can detect RAID partitions and such, be it Gparted or the installer. If you can’t it is OK. This was an experiment anyway.

Regards.

• This reply was modified 1 year, 10 months ago by Xecure. Reason: improved formating

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

[Member zeh]

Xecure wrote:

If anyone else finds issues with the isolinux/syslinux boot menus in other languages, please report NOW.
English vs pt
Boot from Hard Disk Arrancar a partir do Disco Rígido

Not an issue, rather a clarification and correction.
The translation shown above is correct in the sense it’s the literal from en to pt. However, the point is the original is not clear. What the function provides is the possibility of booting an ISO image directly from the HD, whereas the description in en indicates a normal boot from HD.
So, I’d you to correct the translation (to pt) to «Arrancar com imagem ISO» (meaning Boot with an ISO image).
I’m correcting the translation on Transifex as well, so you can just use the file over there.
Thank you.

[Member marcelocripe]

We could add a warning for Brazilian users in the release notes. I don’t see it is worthy to recreate ALL Iso files, when the bullseye release is approaching.

Eu acho que o mais coerente é fazer isso, uma nota de aviso. Eu acredito que a intenção era de utilizar as traduções mais recentes do transifex, o que me deixa muito contente em poder ver que os trabalhos que fazemos (eu escrevi “fazemos” no plural, pois eu incluo todas as pessoas que me ajudam, sejam com a explicação de uma palavra ou de várias frases) estão sendo utilizados para o bem do antiX e de todos os usuários.

… you are not the ONLY Brazilian using antiX. Don’t take all the responsibility for yourself.

Você tem razão, eu sempre faço avisos e pedidos nos grupos de Telegram e WhatsApp para as pessoas voltarem a usar os fóruns do antiX/MX Linux e para os que não possuem uma conta, fazer o cadastro/registro. De vez enquanto vemos novos participantes aqui.

Don’t worry about it. If you need an ISO, I will build a i386 or amd64 FULL ISO, replacing the pt_BR language for pt only for the Legacy boot menu, but that will have to wait until tomorrow.

Xecure, eu não tenho ideia da dificuldade, da quantidade de trabalho e do tempo que você iria desprender para construir outras duas ISOs 19.4 Full, apenas para corrigir este problema. Ao invés disso, eu posso te fazer um outro pedido? Uma nova ISO de 64 bits com kernel semelhante a ISO (antiX-19-legacy-bet2_386-base.iso). Eu acredito que o seu tempo, trabalho e esforço voluntário, poderão ser muito melhor aproveitados por várias pessoas que possuem processador de 64 bits em placa-mãe que contém placa de vídeo Via ou SIS. Assim o antiX ganha mais possibilidades de uso.

Muito obrigado por sempre se importar com tudo que é relacionado ao antiX e por sempre me ajudar.

marcelocripe

[Member Xecure]

@marcelocripe, you are not the ONLY Brazilian using antiX. Don’t take all the responsibility for yourself. Testing 19.4 was totally open, and many outside of the forum also downloaded it and tested it, used it, wrote articles, made videos, etc. Don’t try to take up all the work yourself.

It has been over 1 month since the official release. Probably someone already spotted it but never reported it expecting someone else to do it.

Don’t worry about it. If you need an ISO, I will build a i386 or amd64 FULL ISO, replacing the pt_BR language for pt only for the Legacy boot menu, but that will have to wait until tomorrow.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

[Member marcelocripe]

Olá Xecure,

That is why there was a period of testing before the 19.4 release. Testing it would have found this problem before the official release.

Infelizmente eu não tenho tempo disponível para poder colaborar como eu gostaria. As traduções e revisões dos textos, sejam do antiX ou dos programas, tomam muito do meu tempo livre, por isso não consigo fazer os testes na época correta. Eu também procuro ajudar nos testes dos programas criados pelos programadores daqui do fórum. Se ao menos houvesse um cronograma disponível com as datas e os prazos para envio de sugestões e correções, eu teria como me organizar para fazer ao menos uma análise superficial. Se existir um cronograma para a versão 21, eu gostaria de ter acesso a este cronograma, assim eu posso tentar fazer uma análise, mesmo que seja superficial e do ponto de vista dos textos em pt-BR. A primeira instalação da ISO 19.4 Full 64 bits ocorreu no dia 12-06-2021, mas eu não tinha uma câmera para poder capturar a imagem, no dia 19-06-2021 eu consegui fazer outra instalação e enfim capturar as imagens, mas foi só ontem eu consegui criar este tópico. Um dado interessante, Xecure, de cada 10 instalações que eu faço, cerca de 6 ou 7 computadores/notebooks funcionam apenas com a ISO (antiX-19-legacy-bet2_386-base.iso) que você construiu, sendo que entre 4 ou 3 computadores/notebooks funcionam com a ISO oficial Full de 32/64 bits ou com a sua outra criação a ISO (pseudo-antiX-19.3_x64.iso). Não pára de chegar placa-mãe com placa de vídeo Via, processador de 64 bits e algumas vezes me surpreendem com DDR 3.

Obrigado por me ensinar o local onde ficam estes arquivos de tradução do menu do gerenciador/carregador de inicialização (Bootloader) da ISO.

Ainda existem outros detalhes nos textos dos menus que eu observei, mas ainda não consegui ter tempo disponível para poder preparar o texto para publicar aqui no fórum, espero conseguir fazer isso neste fim de semana.

Grato.

marcelocripe

[Member Xecure]

It seems like the installer is not ready yet for RAID.

Would you mind trying out the latest MX Linux 19.4 AHS iso, update the live system and see if their new installer can detect and let you select your RAID system?

The MX LInux team is doing a lot for improving support for newer hardware, so they are a reference for us. As most antiX users have old hardware, we will lag behind compared to other distros.

Let us know if you can test MX installer out (and probably use them instead if you see they also have good performance). If we are asking too much, I understand, as time is precious.

Sorry for not being able to provide much support for this particular issue.

TheBigBadBoy wrote:

So I tried again with the most recent iso image (May 21, 2021), and when I choose the mode in which I want to boost antix, I have an infinite black screen (even in secureboot safe mode). What’s weird is that it looks like antix is working, but there is no graphical feedback (I say that because, with only a short press on the power button, the pc shuts down after a few seconds).

That is what usually happens with the 4.9 kernel on newer hardware. Though the antiX developer has done a lot to improve hardware support on that particular kernel, not everything can be included and work.

Again, thanks for testing everything out.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

[Member Xecure]

That is why there was a period of testing before the 19.4 release. Testing it would have found this problem before the official release.
If anyone else finds issues with the isolinux/syslinux boot menus in other languages, please report NOW. I will spend some time this afternoon to see if I can find more (for languages I can actually recognize).

I have checked the pt_BR.tr and compared to the pt.tr (boot/isolinux/gfx-cpio) for the antiX 19.4 ISOs. I observed that it is using the new translations (for antiX bullseye) for pt_BR instead of the old antiX 19 translations, so the order of things is completely different.

See English vs pt

auto				   automático
auto mount			    montagem automática
Boot from Hard Disk		    Arrancar a partir do Disco Rígido
Boot Options			    Opções de Arranque
both				    ambos
Cancel				    Cancelar
check md5			    verificação md5
Command Line Boot		    Arrancar pela Linha de Commando
Console				    Consola
custom				    personalizar
default				    pré-definição
Desktop				    Ambiente de trabalho
Exiting...			    A sair...
Failsafe Boot			    Arrancar em Modo Seguro
Fast Boot			    Arranque Rápido
Help				    Ajuda
Language			    Idioma
Memory Test			    Teste de Memória
menus				    menus
none				    nenhuma
off				    desligado
OK				    Aceitar
Options				    Opções
Halt the system now?		    Desligar o sistema agora?
Power Off			    Desligar
Reboot				    Reiniciar
reset				    restabelecer
Safe Video Mode			    Modo de Vídeo Seguro
Save				    Guardar
Timezone			    Zona Horária
Switch to Grub Bootloader	    Mudar para o carregador do arranque
Virtual Box Video		    Virtual Box Vídeo
Video Mode			    Modo de Vídeo

and now English vs pt_BR.

auto				   auto
auto mount			    montagem automática
Boot from Hard Disk		    Voltar para o Início
Boot Options			    Inicializar a partir do Disco Rígido
both				    Opções de Inicialização
Cancel				    ambos
check md5			    Cancelar
Command Line Boot		    verifique o md5
Console				    Inicialização por meio de Linha de Co
custom				    Console
default				    personalizar
Desktop				    padrão
Exiting...			    Área de Trabalho
Failsafe Boot			    Saindo...
Fast Boot			    Inicialização à Prova de Falhas
Help				    Inicialização Rápida
Language			    Ajuda
Memory Test			    Idioma
menus				    Teste de Memória
none				    menus
off				    nenhuma
OK				    Inicialização Normal
Options				    desligado
Halt the system now?		    OK
Power Off			    Opções
Reboot				    Desligar o sistema agora?
reset				    Desligar
Safe Video Mode			    Reiniciar
Save				    reiniciar
Timezone			    Modo de Vídeo Seguro
Switch to Grub Bootloader	    Inicialização em Modo de Vídeo Seguro
Virtual Box Video		    Salvar
Video Mode			    Fuso Horário
				    Alternar para o Carregador de Inici
				    Usar o Núcleo/Kernel Legado
				    Usar o Núcleo/Kernel Moderno
				    Vídeo do Virtual Box
				    Modo de Vídeo

Starting from
Boot from Hard Disk Voltar para o Início
all entries are completely different. I realized it is the translation for the bullseye ISOs because of

Usar o Núcleo/Kernel Legado
Usar o Núcleo/Kernel Moderno

which are the new entries “Use Legacy kernel” and “Use Modern kernel”.

If other can check for languages they do understand, and spot strange translations for Legacy Boot, please report and we can make a list of them.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

[Member TheBigBadBoy]

Indeed, the problem came from EXPKEYSIG, because after having the different steps the version of antix-installer was 1.5.2. Unfortunately, even after that, my SSD is still not visible neither in the installer nor in GParted…

So I tried again with the most recent iso image (May 21, 2021), and when I choose the mode in which I want to boost antix, I have an infinite black screen (even in secureboot safe mode). What’s weird is that it looks like antix is working, but there is no graphical feedback (I say that because, with only a short press on the power button, the pc shuts down after a few seconds).

If it makes a difference, my SSD is “NVMe WDC PC SN530 SDB”

• This reply was modified 1 year, 10 months ago by TheBigBadBoy.

Olá caros usuários brasileiros do antiX Linux,

As novas ISOs do antiX 19.4 foram disponibilizadas no dia 21-05-2021, por seu criador @anticapitalista, consulte o anúncio na página https://antixlinux.com/antix-19-4-available/.

O vídeo do @Xecure publicado no dia 11-06-2021 no YouTube, através da URL https://www.youtube.com/watch?v=Xcd1fkZ16jE&t=22s, possui um resumo das principais alterações, correções e melhorias no sistema operacional.

Conforme foi comentado em diversos tópicos daqui do fórum e no vídeo, para todos os usuários que possui o antiX 19.X (a letra ‘X’ representa 1, 2, ou 3) já instalado no disco rígido, precisará apenas atualizar o seu sistema para chegar até o antiX 19.4. Por isso, é recomendado atualizar todos os dias o seu antiX, através do Menu, Aplicações, antiX, Atualizador do antiX.

As traduções estão sendo implementadas a cada no ISO e podem ser recebidas através das atualizações do sistema operacional antiX. Ainda temos muito trabalho pela frente, no que diz respeito as traduções (adaptações e correções das frases dentro do contexto que é empregado) para o idioma Português do Brasil. Aproveito aqui para agradecer a ajuda do Luck Dia (ex administrador do grupo de Telegram MX Linux BR não oficial), @felipecardope, @motareli e demais participantes dos grupos de Telegram e WhatsApp por sempre colaborarem com ideias e sugestões para as traduções das frases a serem utilizadas no antiX e nos programas aplicativos.

Atentem-se ao problema no menu principal do gerenciador/carregador de inicialização da ISO antiX 19.4 para o idioma pt-BR. Observem nas imagens abaixo, ao pressionar a tecla F2 e selecionar o idioma Português de Portugal (pt), os textos são carregados corretamente sobrepondo=se aos textos em idioma Inglês (en). Quando é selecionado o idioma Português do Brasil (pt-BR), por algum motivo os textos carregados não são os que eu inseri no sítio Transifex.

Textos em idioma Inglês (en):
https://ibb.co/7vgzQ7G

Textos em idioma Português de Portugal/Europeu (pt):
https://ibb.co/X3LCtBN

Textos em idioma Português do Brasil (pt-BR):
https://ibb.co/FYHPWL8

Textos contidos no arquivo “Live Bootloader” no sítio Transifex (pt-BR):
https://ibb.co/ryT84kf

Meus agradecimentos ao criador, aos desenvolvedores e aos programadores do antiX.

marcelocripe

[Member Xecure]

It would be good news to know that the 19.4 ISO can also boot on 10th gen Intel machines.

If you can solve the expressig issue (or even if not), please try it out to let us know so we can recommend its use in the future.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

I have a computer with an intel i9 10th generation cpu, and 2 disks: HDD and SSD NVMe with Intel RST technology (also called RAID). I’m particularly interested in AntiX for its minimalism, so I was able to find an iso image that could be installed on a pc with the 10th generation intel cpu.

My goal would be to have Linux and Windows on my NVMe SSD in dual boot, leaving the mode on RST.
Thanks to this link, I now know how to have the 2 OS (in dual boot) having put the SSD in AHCI.
The “problem” is that
– it is impossible for me to install directly in RST any Linux distribution
– with AHCI selected, the reading of the SSD disk is slower.

This brings me to 2 questions:
– Once Linux is installed in AHCI mode, is it possible to make it work when switching to RST (RAID) mode? Maybe like in the previous link, by activating the safe boot?
– If not, can we expect to see support for RST (RAID) technology in Linux soon? If so, how long will it take?

Many thanks for your attention to this message.

[Anonymous]

I burnt a CD

First suggestion: try again and append “from=all” to the bootline.

Second: On a working machine, load the CD and browse its content.
Is “/dev/sr0/antix/linuxfs” truly absent?
If it not absent, could be a “bad burn” right? So, maybe retry and use a slower speed
.
Take a step further back. Possibly the downloaded ISO was corrupt. Recheck the md5sum (or sha256 sum) of the ISO file to verify its integrity.

Another idea:
After the “fatal error”, if a command prompt is displayed (vs unresponsive blinking underscore cursor) use the “blkid” command to check what is the (apparently something other than sr0) /dev path for the device.

An office machine died so I found one in the cupboard. Sadly it turned out to be a 32bit XP machine. I burnt a CD (no USB boot available) for net installation because the full iso is too big for a CD and thought I would be adventurous. All went well until I selected the option to run antix and I received an error.

Filtered devices /dev/sr0
Retry for 15 seconds…………
Fatal Error
Could not find file antix/linuxfs
Searched devices: /dev/sr0
Searched types: usb,cd
All block devices: /dev/sr0 /dev/sda2 /dev/sdb /dev/sda1 /dev/sda

Please contact BitJam at https://www.antixforum.com

This seemed like a good place to start without knowing BitJam.
Please forward if appropriate.
Meanwhile I am burning a base version. Will post if it doesn’t work.
Budge

[Member calciumsodium]

Xecure wrote:

Also, on Legacy Boot, F8 menu (save boot changes) selecting the legacy kernel doesn’t work (at least on my tests). Could anyone else check if this also happens to them?

I see that (on my system) the F8 menu saves the changes to Grub menu, but the syslinux/isolinux doesn’t remember them.

Hi @Xecure,
I am trying to reproduce the above. Can you please go into a little bit more detail so I can try to reproduce? Thanks