-
Search Results
-
In reply to: Second proposal for cleaned up version 17.2.1
Anonymous
Apparently
Let’s suppose I have absolutely 0 (zero) knowledge of what Herbstluft is but I wanna try it and eventually learn it.
I’d start my computer in “Herbstluft mode” and … I’m left there alone with my own desparation.
What do I do next? Where do I find Start Menu? How do I open File Manager?
Well, I suppose, I would just press on “10 sec press for OFF” switch.
There’s no obvious reboot button I can see.
Then I’ll go to something I can use, look in Google for something as (bad as):
Afterwards, I’ll go back and give it a second chance. Maybe.
Why don’t you want to help me learning something easier and quicker? Just because AntiX is free of charge?
I also suppose, that if I already know all those Herbstluft shortcuts by heart, because I’m using it every single day since 2007, I’ll also find some way to disable that terribly disturbing “Noob Guide” insulting me from my screen all the time. đ
There are a couple of other examples but, never mind.
In reply to: Second proposal for cleaned up version 17.2.1
Apparently I understand only station here…
How can I recommend i3 after manjaro to a beginner? The developers of antiX could also set fluxbox as default Desktop…
In reply to: After nVidia install – no desktop in other machines
olsztyn
Unfortunately after removing xorg.conf nVidia machine boots to console login prompt. Apparently it does not detect nVidia. There is another file in that folder – something like xorg.conf.nvidia. Perhaps this one needs to be deleted too or instead?
I will appreciate any ideas…Live antiX Boot Options (Previously posted by Xecure):
https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_ParametersTopic: misplaced posts management
grenouille
It happens that some posts are placed in erroneous sections. Most of them are inconsequentials. There is, after all, an inevitable overlapping between subjects. But a few posts are squarely misplaced.
I know I dit it: I didnât check where I was and I put my first post, a technical tip, in âNew Users and General Questionsâ. And to this day, and possibly forever, I, and any onlookers, will live with this oddity.
Would it be possible or profitable to our benevolent managers to move squarely misplaced posts to the right sections?
(I donât mind an apparent disappearing without information about the moving of my post).
Or would it be too burdensome? Their limited time serving first to answer questions to users.Looking for the right section to post the first three paragraphs I found the âSite Helpâ section with the following comments in the post
https://www.antixforum.com/forums/topic/how-can-i-delete-or-change-my-posts/“>https://www.antixforum.com/forums/topic/how-can-i-delete-or-change-my-posts
———————————————————————————————————
January 6, 2018 at 11:38 am #4799
skidoo
– an EDIT button should be available, displayed within each of your posts. For example:
January 6, 2018 at 7:38 amâŠâŠâŠâŠâŠâŠâŠâŠâŠâŠâŠâŠâŠ..âââ} EDIT
– When editing post #1 of a topic, the webform also displays the âtopic titleâ input field, providing opportunity to edit the title.
– Hmm, can you âdeleteâ a post?
– If a âdeleteâ button is not displayed alongside âeditâ⊠but a âTrashâ button is displayed, you can use that button instead.
(IIRC, trashâing post #1 of a topic will result in removal of the entire topic)January 8, 2018 at 5:44 am #4859
Dave
– I donât think that it is a bug, it was decided to only allow editing for a short while after posting. I had asked about this when the forum was first set up.
– https://www.antixforum.com/forums/topic/congratulations/page/2/#post-566
– https://www.antixforum.com/forums/topic/congratulations/page/3/#post-612
——————————————————————————————————————-If I understand I had an opportunity to erase myself my post in the first days and republished it in a more appropriate section?
mixpc
Hello,
I have installed gdebi to manage .deb packages
apt-get install gdebi
and the icon shows in the applications list.
However, opening gdebi and selecting megasync-Debian_9.0_amd64.deb from the Downloads folder will apparently install the software. However, no icon is showing in the applications list and so I cannot find a way to run the software.
Please, let me know in case I am missing a step to follow to correctly proceed with installation and running.
Thank you in advance,
- This topic was modified 4 years, 7 months ago by mixpc.
- This topic was modified 4 years, 7 months ago by mixpc.
In reply to: Old Computers
noordinaryspider
My new computers are apparently “old computers” by normal people standards. AntiX gets the most use on my T20 and T43 Thinkpads, which are my treasures, both deliberately found on eBay to replace the dear departeds from previous chapters of my life. My “daily drivers” that don’t get as much pampering are librebooted X200, T400, X60 and a T61 and X60 with factory Lenovo BIOS.
My phone doesn’t exist. I use Sopranica https://soprani.ca/ , public wifi, and an EeePC netbook instead.
This is by choice and not just for financial reasons. I’m hoping to get either a low end Raptor TALOS or the second generation of the currently crowd-funded EOMA68 when the last of the bunch needs more than I can give it.
The difference between the T20 and the X60 is startling enough inside. I keep the older gal offline except for once in awhile to show her off, but she was obviously built to last a lot longer than my newer old PCs.
- This reply was modified 4 years, 7 months ago by noordinaryspider. Reason: typo
Gnu/Linux user #387554 (since 2005-4-17) with old thinkpads and a strong preference for free-as-in-freedom over proprietary software.
Having loved and dabbled in antiX for a long time, I find that I still have so very much to learn and that learning is so very enjoyable.
In reply to: Initial install feedback
dolphin_oracle
thanks for the feedback.
I ran the sourceforge supplied 64bit image several times last nite and did not encountered any of these issues.
however, from caprea’s output, it looks like some sort of broken connection and apparently the installer cannot write files back to the system. even the grub-install failed like that.
quick question…did both users use “auto install” ?
In reply to: antiX-17.2 released
max43
Ho installato Antix-17.1 i386 base Heather Heyer 17 marzo 2018. Ho provato l’upgrade alla versione 17.2 seguendo le indicazioni fornite, ma, digitando inxi -S appare sempre la versione 17.1
In reply to: Help, I broke antix-viewer
wildstar84
[SOLVED] Never mind, Latest upgrade of libqt5network5 (v5.11.1+dfsg-7 to v5.11.1+dfsg-8) FIXED it! This was apparently due to Debian bug# 907774 which was using the wrong TLS version (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=907774), which this version fixes and just showed up today.
Topic: v.791 deprecato..
massimo
Utilizzo da tempo antix. Ora nella versione 17.1. Funziona tutto bene. Mi ha incuriosito il fatto che in avvio, per un istante, appare la scritta di cui al titolo, che poi scompare senza apparentemente dare problemi. Ho letto da qualche parte che dovrebbe trattarsi di vga, ma francamente ci ho capito poco. Gli esperti potrebbero aiutami a capire, ma soprattutto vorrei essere sicuro che non ci siano problemi in futuro. Ho installato Antix da CD nella versione base.
dolphin_oracle
Before you read this list, please know that I do not wish to give off any feelings of ill-will or disrespect. I hope that you read my suggestions and thoughts with the intent to understand. All of my experience is with the âspace-jwmâ configuration.
Ok thanks!
1. KODI FREEZE:
Installed KODI from package installer ⊠installed. I opened it. Tried to exit. It froze. Had to kill. Package installer froze. Had to kill. (HOURS left frozen.)almost sounds like a video driver problem. if you are using intel parts, your installation might default to “modsetting” driver. You can force the use of the intel driver. there are instructions for that here: https://wiki.archlinux.org/index.php/intel_graphics#Xorg_configuration
you can check what driver is in use with “inxi -F” in the terminal.
2. PROPRIETARY CODECS:
Proprietary codecs âŠcompletely unexplained.there is a help file: https://mxlinux.org/wiki/help-files/help-mx-codecs-installer
however, the codecs are note spelled out except for libdvdcss. the codecs are w32codecs and w64codecs respectively, which have some windows media formats and realaudio I think. I find them mostly unneeded these days. We will see about adding some info to the help file.
3. ALARM:
Where is my Alarm Clock?there isn’t one. feel free to install one. antiX is lean and mean.
4. TASK MANAGER:
Right, so we must have a CTRL+ALT+DEL task manager that is GUI, simple, and powerful. I have used htop for years, but we must have a simpler solution. For example, if you try to, within htop, kill a process that you have highlighted, you could easily kill the wrong process. How, by default, the processes continuously shift. Why? The default column header is âCPUâ, which causes the processes using the CPU to vary depending on the percentage of CPU used. Surely there is a smarter way?sorting by cpu is the default for htop, I believe. I see what you mean though about shifting processes. I generally use the Filter (F4 I think) to filter the results to just what I’m working on.
5. HOTKEYS:
I understand these are WM/FM dependent. Make the defaults cross-platform & pre-configured for new users (at least SOME!). I uncommented, in jwmâs keys file, the line that I have guessed is for launching the terminal (<Key key=âF1âł>exec: desktop-defaults-run -t</Key>). Is that even the right line? You cannot expect new users to a. KNOW THAT and b. CONFIGURE THAT. Well, it must be wrong, as âF1â does not bring up the terminal.hmm…I though the standard keys were predefined across the wm’s. maybe there is something off with jwm.
6. ARANDR:
This will only affect a handful of us. I have a laptop with a broken screen. I find ARandR to be a âmust haveâ application. It allows me to to configure & use an external monitor with my laptop. I would like to solely use an external monitor. The laptopâs monitor is mostly broken. Every time I login to antiX, I have to open ARandR, make the VGA monitor âprimaryâ, and make the laptop monitor not âactiveâ. How can I make that permanent?I believe that arandr has a way built-in to generate a script that you then set to run after login, ie: in your startup file.
7. CONKY:
After turning off my laptop monitor in ARandR, as mentioned in point #6 above, conky seems to invisibly run on the non âactiveâ laptop monitor. I must disable conky and re-enable it to make it appear on the external monitor. Is there a simple fix for making conky know to not display the output on inactive monitors?after you set up your arandr script, set conky to launch after that script runs.
8. CHROMIUM WM:
I installed Chromium. Why doesnât Chromium have Minimize/Maximize on the window?because apparently they have changed something and those buttons now seem to be gtk theme dependent by default. you can change the setting in chromium to use the window manager buttons I do believe. we saw this crop up over at MX forums as well.
9. PULSEAUDIO INCLUSION:
Why is pulseaudio not installed by default?because it goes against the lean & mean philosophy of antiX. but anti does build a systemd-free version for folks that want/need it.
12. JWM DESKTOP ICONS:
Why is there no easy way to add a shortcut to the desktop (space-jwm)?there is. you can drag a link right out of spacefm. I believe there is also a dialog if you right click an existing item (or maybe just outside an existing desktop item). spacefm’s desktop is pretty basic.
13. THIS PC:
I wish there was a âMy Computerâ or âThis PCâ or âAbout this Macâ âŠ2 Reasons:
1. (As on Windows XP-Windows 10) Right-click on This PC/My Computer -> Properties âŠsee a brief readout of, at least, the following: CPU, RAM, GPU, OS and version
2. To have a âfile managerâ view of âThis PCâ ⊠â/â drive, mounted drives, Optical driveswe use inxi from the command line for most system info, but I think there might be a gui system report tool in the antiX control centre. There should be file manager links on your top level menus as well as the default panels. Some other of the bigger Desktop environments have that sort of feature directly as you describe (well, mostly), but there are tradeoffs in performance/memory usage/ etc… with the larger environments that are outside the lean & mean antiX philosophy.
14. USERâS FOLDERS IN SPACEFM:
SpaceFM, it needs the userâs Documents, Pictures, Videos, & Downloads in the left-hand pane.spacefm doesn’t do it by default. you can add bookmarks if you wish, but that’s as close as you can get.
15. MOUNTED CONFUSION IN SPACEFM:
SpaceFM should, visually, make it completely clear whether or not a drive is mounted or unmounted via visual/icon changes (i.e. âlight or opaqueâ icon for unmounted volumes).hmm…you are right, I thought it did that already. Will look into it.
Those are my initial thoughts.
thanks!
- This reply was modified 4 years, 8 months ago by dolphin_oracle.
- This reply was modified 4 years, 8 months ago by dolphin_oracle.
- This reply was modified 4 years, 8 months ago by dolphin_oracle.
DaveW
Well, I may have discovered a reason to install the Full versus the Base version.
I’m unable to print. In the Antix FAQs, I learned that CUPS is required for printing.
I installed CUPS and dependencies with Synaptic.After rebooting, I went to the Antix CC Hardware page, but the “Set Up Printer” feature is missing.
Using a browser, I brought up localhost:631. The Add Printer button reports “unable to add printer: forbidden” (after entering my username and password). When I tried the root password, it returned to the enter username and password entry windows. So, apparently it recognized my password, but didn’t like me.
I opened a root terminal and tried lpstat -p -d with result:
lpstat: no destination added
no system default destinationThus far, the system does not recognize my printer (Brother MFC-7420 USB multifunction printer).
Perhaps there is another piece of software that needs installation?
Edit 1 – Since I posted the above, I have visited the Brother support site, and downloaded a few drivers. Hopefully, when installed, they will wake things up.)Edit 2 – The printer is working. I found Brother printer drivers in the Synaptic manager… actually installed almost everything related to printing in the Full version (compared my Base installation with a liveUSB of Full version)… drivers were not included for my printer. But the downloaded drivers worked. Also, the Setup Printer item is now present in the CC.
I apologize for adding extra verbage to the forum, since the problem is now resolved.
Thank you, DaveW
- This reply was modified 4 years, 8 months ago by DaveW.
- This reply was modified 4 years, 8 months ago by DaveW.
In reply to: Blink Once and Get Systemd
rsmereka
>Basically, we need to find out what removed sysvinit and brought in systemd. Have you looked in /var/log/apt/term.log or /var/log/apt/history.log for any clues?
Best I can figure, the sysvinit stuff got removed and the systemd stuff installed on Jul 13. I don’t know why.
term.log Log started: 2018-07-03 13:56:19 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135076 files and directories currently installed.) Preparing to unpack .../0-python3.6_3.6.6-1_amd64.deb ... Unpacking python3.6 (3.6.6-1) over (3.6.6~rc1-4) ... Preparing to unpack .../1-libpython3.6-stdlib_3.6.6-1_amd64.deb ... Unpacking libpython3.6-stdlib:amd64 (3.6.6-1) over (3.6.6~rc1-4) ... Preparing to unpack .../2-python3.6-minimal_3.6.6-1_amd64.deb ... Unpacking python3.6-minimal (3.6.6-1) over (3.6.6~rc1-4) ... Preparing to unpack .../3-libpython3.6-minimal_3.6.6-1_amd64.deb ... Unpacking libpython3.6-minimal:amd64 (3.6.6-1) over (3.6.6~rc1-4) ... Preparing to unpack .../4-libquadmath0_8.1.0-9_amd64.deb ... Unpacking libquadmath0:amd64 (8.1.0-9) over (8.1.0-8) ... Preparing to unpack .../5-libitm1_8.1.0-9_amd64.deb ... Unpacking libitm1:amd64 (8.1.0-9) over (8.1.0-8) ... Preparing to unpack .../6-gcc-8-base_8.1.0-9_amd64.deb ... Unpacking gcc-8-base:amd64 (8.1.0-9) over (8.1.0-8) ... Setting up gcc-8-base:amd64 (8.1.0-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135076 files and directories currently installed.) Preparing to unpack .../libstdc++6_8.1.0-9_amd64.deb ... Unpacking libstdc++6:amd64 (8.1.0-9) over (8.1.0-8) ... Setting up libstdc++6:amd64 (8.1.0-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135076 files and directories currently installed.) Preparing to unpack .../0-libmpx2_8.1.0-9_amd64.deb ... Unpacking libmpx2:amd64 (8.1.0-9) over (8.1.0-8) ... Preparing to unpack .../1-liblsan0_8.1.0-9_amd64.deb ... Unpacking liblsan0:amd64 (8.1.0-9) over (8.1.0-8) ... Preparing to unpack .../2-libtsan0_8.1.0-9_amd64.deb ... Unpacking libtsan0:amd64 (8.1.0-9) over (8.1.0-8) ... Preparing to unpack .../3-libcc1-0_8.1.0-9_amd64.deb ... Unpacking libcc1-0:amd64 (8.1.0-9) over (8.1.0-8) ... Preparing to unpack .../4-libatomic1_8.1.0-9_amd64.deb ... Unpacking libatomic1:amd64 (8.1.0-9) over (8.1.0-8) ... Preparing to unpack .../5-libgomp1_8.1.0-9_amd64.deb ... Unpacking libgomp1:amd64 (8.1.0-9) over (8.1.0-8) ... Preparing to unpack .../6-libgcc1_1%3a8.1.0-9_amd64.deb ... Unpacking libgcc1:amd64 (1:8.1.0-9) over (1:8.1.0-8) ... Setting up libgcc1:amd64 (1:8.1.0-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135076 files and directories currently installed.) Preparing to unpack .../libaudit1_1%3a2.8.3-1+b1_amd64.deb ... Unpacking libaudit1:amd64 (1:2.8.3-1+b1) over (1:2.8.3-1) ... Setting up libaudit1:amd64 (1:2.8.3-1+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135077 files and directories currently installed.) Preparing to unpack .../libselinux1_2.8-1+b1_amd64.deb ... Unpacking libselinux1:amd64 (2.8-1+b1) over (2.8-1) ... Setting up libselinux1:amd64 (2.8-1+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135078 files and directories currently installed.) Preparing to unpack .../libsemanage1_2.8-1+b1_amd64.deb ... Unpacking libsemanage1:amd64 (2.8-1+b1) over (2.8-1) ... Setting up libsemanage1:amd64 (2.8-1+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135079 files and directories currently installed.) Preparing to unpack .../00-libnewt0.52_0.52.20-5_amd64.deb ... Unpacking libnewt0.52:amd64 (0.52.20-5) over (0.52.20-4) ... Preparing to unpack .../01-whiptail_0.52.20-5_amd64.deb ... Unpacking whiptail (0.52.20-5) over (0.52.20-4) ... Preparing to unpack .../02-rsyslog_8.36.0-1.0nosystemd1_amd64.deb ... Unpacking rsyslog (8.36.0-1.0nosystemd1) over (8.35.0-1.0nosystemd1) ... Preparing to unpack .../03-libasan4_7.3.0-24_amd64.deb ... Unpacking libasan4:amd64 (7.3.0-24) over (7.3.0-23) ... Preparing to unpack .../04-libubsan0_7.3.0-24_amd64.deb ... Unpacking libubsan0:amd64 (7.3.0-24) over (7.3.0-23) ... Preparing to unpack .../05-libcilkrts5_7.3.0-24_amd64.deb ... Unpacking libcilkrts5:amd64 (7.3.0-24) over (7.3.0-23) ... Preparing to unpack .../06-gcc-7_7.3.0-24_amd64.deb ... Unpacking gcc-7 (7.3.0-24) over (7.3.0-23) ... Preparing to unpack .../07-libgcc-7-dev_7.3.0-24_amd64.deb ... Unpacking libgcc-7-dev:amd64 (7.3.0-24) over (7.3.0-23) ... Preparing to unpack .../08-libgfortran4_7.3.0-24_amd64.deb ... Unpacking libgfortran4:amd64 (7.3.0-24) over (7.3.0-23) ... Preparing to unpack .../09-cpp-7_7.3.0-24_amd64.deb ... Unpacking cpp-7 (7.3.0-24) over (7.3.0-23) ... Preparing to unpack .../10-gcc-7-base_7.3.0-24_amd64.deb ... Unpacking gcc-7-base:amd64 (7.3.0-24) over (7.3.0-23) ... Preparing to unpack .../11-libcryptsetup12_2%3a2.0.3-4_amd64.deb ... Unpacking libcryptsetup12:amd64 (2:2.0.3-4) over (2:2.0.2-1) ... Preparing to unpack .../12-cryptsetup-bin_2%3a2.0.3-4_amd64.deb ... Unpacking cryptsetup-bin (2:2.0.3-4) over (2:2.0.2-1) ... Preparing to unpack .../13-cryptsetup_2%3a2.0.3-4_all.deb ... Unpacking cryptsetup (2:2.0.3-4) over (2:2.0.2-1) ... Selecting previously unselected package cryptsetup-run. Preparing to unpack .../14-cryptsetup-run_2%3a2.0.3-4_amd64.deb ... Unpacking cryptsetup-run (2:2.0.3-4) ... Selecting previously unselected package cryptsetup-initramfs. Preparing to unpack .../15-cryptsetup-initramfs_2%3a2.0.3-4_all.deb ... Unpacking cryptsetup-initramfs (2:2.0.3-4) ... Preparing to unpack .../16-libgtk-3-common_3.22.30-2_all.deb ... Unpacking libgtk-3-common (3.22.30-2) over (3.22.29-3) ... Preparing to unpack .../17-libfribidi0_0.19.7-3_amd64.deb ... Unpacking libfribidi0:amd64 (0.19.7-3) over (0.19.7-2) ... Preparing to unpack .../18-libharfbuzz0b_1.8.1-1_amd64.deb ... Unpacking libharfbuzz0b:amd64 (1.8.1-1) over (1.7.6-1+b1) ... Preparing to unpack .../19-libpango1.0-0_1.42.1-2_amd64.deb ... Unpacking libpango1.0-0:amd64 (1.42.1-2) over (1.42.0-1) ... Preparing to unpack .../20-libpangoft2-1.0-0_1.42.1-2_amd64.deb ... Unpacking libpangoft2-1.0-0:amd64 (1.42.1-2) over (1.42.0-1) ... Preparing to unpack .../21-libpangocairo-1.0-0_1.42.1-2_amd64.deb ... Unpacking libpangocairo-1.0-0:amd64 (1.42.1-2) over (1.42.0-1) ... Preparing to unpack .../22-libpangoxft-1.0-0_1.42.1-2_amd64.deb ... Unpacking libpangoxft-1.0-0:amd64 (1.42.1-2) over (1.42.0-1) ... Preparing to unpack .../23-libpango-1.0-0_1.42.1-2_amd64.deb ... Unpacking libpango-1.0-0:amd64 (1.42.1-2) over (1.42.0-1) ... Preparing to unpack .../24-libxml2_2.9.4+dfsg1-7+b1_amd64.deb ... Unpacking libxml2:amd64 (2.9.4+dfsg1-7+b1) over (2.9.4+dfsg1-7) ... Preparing to unpack .../25-libsoup2.4-1_2.62.2-2_amd64.deb ... Unpacking libsoup2.4-1:amd64 (2.62.2-2) over (2.62.1-1) ... Preparing to unpack .../26-libgtk-3-0_3.22.30-2_amd64.deb ... Unpacking libgtk-3-0:amd64 (3.22.30-2) over (3.22.29-3) ... Preparing to unpack .../27-libgtk2.0-common_2.24.32-2_all.deb ... Unpacking libgtk2.0-common (2.24.32-2) over (2.24.32-1) ... Preparing to unpack .../28-libgtk2.0-0_2.24.32-2_amd64.deb ... Unpacking libgtk2.0-0:amd64 (2.24.32-2) over (2.24.32-1) ... Preparing to unpack .../29-libnss3_2%3a3.38-1_amd64.deb ... Unpacking libnss3:amd64 (2:3.38-1) over (2:3.37.1-1) ... Preparing to unpack .../30-firefox-esr_52.9.0esr-1_amd64.deb ... Leaving 'diversion of /usr/bin/firefox to /usr/bin/firefox.real by firefox-esr' Unpacking firefox-esr (52.9.0esr-1) over (52.8.1esr-2) ... Preparing to unpack .../31-gir1.2-pango-1.0_1.42.1-2_amd64.deb ... Unpacking gir1.2-pango-1.0:amd64 (1.42.1-2) over (1.42.0-1) ... Preparing to unpack .../32-gir1.2-gtk-3.0_3.22.30-2_amd64.deb ... Unpacking gir1.2-gtk-3.0:amd64 (3.22.30-2) over (3.22.29-3) ... Preparing to unpack .../33-libsoup-gnome2.4-1_2.62.2-2_amd64.deb ... Unpacking libsoup-gnome2.4-1:amd64 (2.62.2-2) over (2.62.1-1) ... Preparing to unpack .../34-gir1.2-soup-2.4_2.62.2-2_amd64.deb ... Unpacking gir1.2-soup-2.4:amd64 (2.62.2-2) over (2.62.1-1) ... Preparing to unpack .../35-gtk-update-icon-cache_3.22.30-2_amd64.deb ... Unpacking gtk-update-icon-cache (3.22.30-2) over (3.22.29-3) ... Preparing to unpack .../36-gtk2-engines-pixbuf_2.24.32-2_amd64.deb ... Unpacking gtk2-engines-pixbuf:amd64 (2.24.32-2) over (2.24.32-1) ... Preparing to unpack .../37-libapparmor1_2.12-4+b1_amd64.deb ... Unpacking libapparmor1:amd64 (2.12-4+b1) over (2.12-4) ... Selecting previously unselected package libcppunit-1.14-0:amd64. Preparing to unpack .../38-libcppunit-1.14-0_1.14.0-3_amd64.deb ... Unpacking libcppunit-1.14-0:amd64 (1.14.0-3) ... Preparing to unpack .../39-libdw1_0.170-0.5_amd64.deb ... Unpacking libdw1:amd64 (0.170-0.5) over (0.170-0.4) ... Preparing to unpack .../40-libelf1_0.170-0.5_amd64.deb ... Unpacking libelf1:amd64 (0.170-0.5) over (0.170-0.4) ... Preparing to unpack .../41-libgtk-3-bin_3.22.30-2_amd64.deb ... Unpacking libgtk-3-bin (3.22.30-2) over (3.22.29-3) ... Preparing to unpack .../42-libharfbuzz-icu0_1.8.1-1_amd64.deb ... Unpacking libharfbuzz-icu0:amd64 (1.8.1-1) over (1.7.6-1+b1) ... Preparing to unpack .../43-libkpathsea6_2018.20180416.47457-5_amd64.deb ... Unpacking libkpathsea6:amd64 (2018.20180416.47457-5) over (2018.20180416.47457-4) ... Preparing to unpack .../44-libllvm6.0_1%3a6.0.1-2_amd64.deb ... Unpacking libllvm6.0:amd64 (1:6.0.1-2) over (1:6.0-3+b1) ... Selecting previously unselected package libtorrent20:amd64. Preparing to unpack .../45-libtorrent20_0.13.7-1_amd64.deb ... Unpacking libtorrent20:amd64 (0.13.7-1) ... Preparing to unpack .../46-libvte-2.91-common_0.52.2-1_all.deb ... Unpacking libvte-2.91-common (0.52.2-1) over (0.52.0-1) ... Preparing to unpack .../47-libvte-2.91-0_0.52.2-1_amd64.deb ... Unpacking libvte-2.91-0:amd64 (0.52.2-1) over (0.52.0-1) ... Preparing to unpack .../48-libvte9_1%3a0.28.2-5+b3_amd64.deb ... Unpacking libvte9 (1:0.28.2-5+b3) over (1:0.28.2-5+b2) ... Preparing to unpack .../49-libxml2-utils_2.9.4+dfsg1-7+b1_amd64.deb ... Unpacking libxml2-utils (2.9.4+dfsg1-7+b1) over (2.9.4+dfsg1-7) ... Preparing to unpack .../50-libxmlsec1_1.2.26-3_amd64.deb ... Unpacking libxmlsec1:amd64 (1.2.26-3) over (1.2.25-2) ... Preparing to unpack .../51-libxmlsec1-nss_1.2.26-3_amd64.deb ... Unpacking libxmlsec1-nss:amd64 (1.2.26-3) over (1.2.25-2) ... Preparing to unpack .../52-linux-libc-dev_4.16.16-2_amd64.deb ... Unpacking linux-libc-dev:amd64 (4.16.16-2) over (4.16.12-1) ... Preparing to unpack .../53-python-cairo_1.16.2-1+b1_amd64.deb ... Unpacking python-cairo:amd64 (1.16.2-1+b1) over (1.16.2-1) ... Preparing to unpack .../54-python-dbus_1.2.8-2+b1_amd64.deb ... Unpacking python-dbus (1.2.8-2+b1) over (1.2.8-2) ... Preparing to unpack .../55-python-gi_3.28.2-1+b1_amd64.deb ... Unpacking python-gi (3.28.2-1+b1) over (3.28.2-1) ... Preparing to unpack .../56-python-lxml_4.2.1-1+b1_amd64.deb ... Unpacking python-lxml:amd64 (4.2.1-1+b1) over (4.2.1-1) ... Preparing to unpack .../57-python-urwid_2.0.1-2+b1_amd64.deb ... Unpacking python-urwid (2.0.1-2+b1) over (2.0.1-2) ... Preparing to unpack .../58-python3-cairo_1.16.2-1+b1_amd64.deb ... Unpacking python3-cairo:amd64 (1.16.2-1+b1) over (1.16.2-1) ... Preparing to unpack .../59-python3-cups_1.9.73-2+b1_amd64.deb ... Unpacking python3-cups (1.9.73-2+b1) over (1.9.73-2) ... Preparing to unpack .../60-python3-dbus_1.2.8-2+b1_amd64.deb ... Unpacking python3-dbus (1.2.8-2+b1) over (1.2.8-2) ... Preparing to unpack .../61-python3-gi_3.28.2-1+b1_amd64.deb ... Unpacking python3-gi (3.28.2-1+b1) over (3.28.2-1) ... Preparing to unpack .../62-python3-lxml_4.2.1-1+b1_amd64.deb ... Unpacking python3-lxml:amd64 (4.2.1-1+b1) over (4.2.1-1) ... Preparing to unpack .../63-python3-ptyprocess_0.6.0-1_all.deb ... Unpacking python3-ptyprocess (0.6.0-1) over (0.5.2-1) ... Preparing to unpack .../64-python3-reportlab-accel_3.4.0-3+b2_amd64.deb ... Unpacking python3-reportlab-accel:amd64 (3.4.0-3+b2) over (3.4.0-3+b1) ... Preparing to unpack .../65-rtorrent_0.9.7-1_amd64.deb ... Unpacking rtorrent (0.9.7-1) over (0.9.6-3+b2) ... Setting up libquadmath0:amd64 (8.1.0-9) ... Setting up libgomp1:amd64 (8.1.0-9) ... Setting up libkpathsea6:amd64 (2018.20180416.47457-5) ... Setting up libcppunit-1.14-0:amd64 (1.14.0-3) ... Setting up libatomic1:amd64 (8.1.0-9) ... Setting up libtorrent20:amd64 (0.13.7-1) ... Setting up python-urwid (2.0.1-2+b1) ... Setting up libcc1-0:amd64 (8.1.0-9) ... Setting up libgtk2.0-common (2.24.32-2) ... Setting up python3-cups (1.9.73-2+b1) ... Setting up python3-dbus (1.2.8-2+b1) ... Setting up libcryptsetup12:amd64 (2:2.0.3-4) ... Processing triggers for mime-support (3.61) ... Setting up libllvm6.0:amd64 (1:6.0.1-2) ... Processing triggers for desktop-file-utils (0.23-3) ... Setting up libgtk-3-common (3.22.30-2) ... Setting up libelf1:amd64 (0.170-0.5) ... Setting up libtsan0:amd64 (8.1.0-9) ... Processing triggers for libglib2.0-0:amd64 (2.56.1-2) ... Setting up linux-libc-dev:amd64 (4.16.16-2) ... Setting up libnss3:amd64 (2:3.38-1) ... Setting up libharfbuzz0b:amd64 (1.8.1-1) ... Setting up python3-gi (3.28.2-1+b1) ... Setting up libxml2:amd64 (2.9.4+dfsg1-7+b1) ... Setting up liblsan0:amd64 (8.1.0-9) ... Setting up gcc-7-base:amd64 (7.3.0-24) ... Setting up libpython3.6-minimal:amd64 (3.6.6-1) ... Setting up libxmlsec1:amd64 (1.2.26-3) ... Setting up libmpx2:amd64 (8.1.0-9) ... Setting up gtk-update-icon-cache (3.22.30-2) ... Setting up python-gi (3.28.2-1+b1) ... Setting up libvte-2.91-common (0.52.2-1) ... Setting up rtorrent (0.9.7-1) ... Processing triggers for libc-bin (2.27-3) ... Setting up libapparmor1:amd64 (2.12-4+b1) ... Setting up python-lxml:amd64 (4.2.1-1+b1) ... Setting up cryptsetup-bin (2:2.0.3-4) ... Setting up python-cairo:amd64 (1.16.2-1+b1) ... Setting up libfribidi0:amd64 (0.19.7-3) ... Processing triggers for man-db (2.8.3-2) ... Setting up python3-reportlab-accel:amd64 (3.4.0-3+b2) ... Setting up python3-cairo:amd64 (1.16.2-1+b1) ... Setting up libnewt0.52:amd64 (0.52.20-5) ... Setting up python-dbus (1.2.8-2+b1) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Setting up python3-ptyprocess (0.6.0-1) ... Setting up libxmlsec1-nss:amd64 (1.2.26-3) ... Setting up libitm1:amd64 (8.1.0-9) ... Setting up rsyslog (8.36.0-1.0nosystemd1) ... [....] Stopping enhanced syslogd: rsyslogd[?25l7[1G[[32m ok [39;49m8[?12l[?25h. [....] Starting enhanced syslogd: rsyslogd[?25l7[1G[[32m ok [39;49m8[?12l[?25h. Setting up libpython3.6-stdlib:amd64 (3.6.6-1) ... Setting up libharfbuzz-icu0:amd64 (1.8.1-1) ... Setting up libasan4:amd64 (7.3.0-24) ... Setting up libgfortran4:amd64 (7.3.0-24) ... Setting up python3-lxml:amd64 (4.2.1-1+b1) ... Setting up libdw1:amd64 (0.170-0.5) ... Setting up libcilkrts5:amd64 (7.3.0-24) ... Setting up libubsan0:amd64 (7.3.0-24) ... Setting up whiptail (0.52.20-5) ... Setting up libsoup2.4-1:amd64 (2.62.2-2) ... Setting up libxml2-utils (2.9.4+dfsg1-7+b1) ... Setting up python3.6-minimal (3.6.6-1) ... Setting up cryptsetup-run (2:2.0.3-4) ... Installing new version of config file /etc/default/cryptdisks ... Installing new version of config file /etc/init.d/cryptdisks ... Installing new version of config file /etc/init.d/cryptdisks-early ... Setting up libsoup-gnome2.4-1:amd64 (2.62.2-2) ... Setting up gir1.2-soup-2.4:amd64 (2.62.2-2) ... Setting up libgcc-7-dev:amd64 (7.3.0-24) ... Setting up cpp-7 (7.3.0-24) ... Setting up cryptsetup-initramfs (2:2.0.3-4) ... update-initramfs: deferring update (trigger activated) Setting up libpango-1.0-0:amd64 (1.42.1-2) ... Setting up python3.6 (3.6.6-1) ... Setting up gcc-7 (7.3.0-24) ... Setting up cryptsetup (2:2.0.3-4) ... Setting up libpangoft2-1.0-0:amd64 (1.42.1-2) ... Setting up libpangoxft-1.0-0:amd64 (1.42.1-2) ... Setting up libpangocairo-1.0-0:amd64 (1.42.1-2) ... Setting up libgtk-3-0:amd64 (3.22.30-2) ... Setting up gir1.2-pango-1.0:amd64 (1.42.1-2) ... Setting up libgtk-3-bin (3.22.30-2) ... Setting up gtk2-engines-pixbuf:amd64 (2.24.32-2) ... Setting up libgtk2.0-0:amd64 (2.24.32-2) ... Setting up libpango1.0-0:amd64 (1.42.1-2) ... Setting up gir1.2-gtk-3.0:amd64 (3.22.30-2) ... Setting up libvte-2.91-0:amd64 (0.52.2-1) ... Setting up firefox-esr (52.9.0esr-1) ... Setting up libvte9 (1:0.28.2-5+b3) ... Processing triggers for libc-bin (2.27-3) ... Processing triggers for initramfs-tools (0.130) ... update-initramfs: Generating /boot/initrd.img-4.4.10-antix.1-amd64-smp cryptsetup: WARNING: The initramfs image may not contain cryptsetup binaries nor crypto modules. If that's on purpose, you may want to uninstall the 'cryptsetup-initramfs' package in order to disable the cryptsetup initramfs integration and avoid this warning. I: The initramfs will attempt to resume from /dev/sda2 I: (UUID=f34a5d1e-9670-4b11-9602-8eb1338a376d) I: Set the RESUME variable to override this. Log ended: 2018-07-03 13:58:53 Log started: 2018-07-04 10:56:52 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135122 files and directories currently installed.) Preparing to unpack .../libseccomp2_2.3.3-3_amd64.deb ... Unpacking libseccomp2:amd64 (2.3.3-3) over (2.3.3-2) ... Setting up libseccomp2:amd64 (2.3.3-3) ... Selecting previously unselected package libdbusmenu-gtk3-4:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135122 files and directories currently installed.) Preparing to unpack .../0-libdbusmenu-gtk3-4_16.04.1+17.04.20170109.1-5_amd64.deb ... Unpacking libdbusmenu-gtk3-4:amd64 (16.04.1+17.04.20170109.1-5) ... Selecting previously unselected package libindicator3-7:amd64. Preparing to unpack .../1-libindicator3-7_0.5.0-3+b1_amd64.deb ... Unpacking libindicator3-7:amd64 (0.5.0-3+b1) ... Selecting previously unselected package libappindicator3-1:amd64. Preparing to unpack .../2-libappindicator3-1_0.4.92-5_amd64.deb ... Unpacking libappindicator3-1:amd64 (0.4.92-5) ... Preparing to unpack .../3-clipit_1.4.4-1_amd64.deb ... Unpacking clipit (1.4.4-1) over (1.4.2-1.2) ... Preparing to unpack .../4-libbrotli1_1.0.5-1_amd64.deb ... Unpacking libbrotli1:amd64 (1.0.5-1) over (1.0.4-1) ... Preparing to unpack .../5-libexiv2-14_0.25-4_amd64.deb ... Unpacking libexiv2-14:amd64 (0.25-4) over (0.25-3.1) ... Preparing to unpack .../6-libgsl23_2.5+dfsg-4_amd64.deb ... Unpacking libgsl23:amd64 (2.5+dfsg-4) over (2.4+dfsg-6) ... Preparing to unpack .../7-libgslcblas0_2.5+dfsg-4_amd64.deb ... Unpacking libgslcblas0:amd64 (2.5+dfsg-4) over (2.4+dfsg-6) ... Preparing to unpack .../8-libtiff5_4.0.9-6_amd64.deb ... Unpacking libtiff5:amd64 (4.0.9-6) over (4.0.9-5) ... Preparing to unpack .../9-python3-pexpect_4.6.0-1_all.deb ... Unpacking python3-pexpect (4.6.0-1) over (4.2.1-1) ... Setting up libbrotli1:amd64 (1.0.5-1) ... Setting up libindicator3-7:amd64 (0.5.0-3+b1) ... Setting up libexiv2-14:amd64 (0.25-4) ... Processing triggers for mime-support (3.61) ... Processing triggers for desktop-file-utils (0.23-3) ... Setting up libdbusmenu-gtk3-4:amd64 (16.04.1+17.04.20170109.1-5) ... Processing triggers for menu (2.1.47+b1) ... Setting up libtiff5:amd64 (4.0.9-6) ... Processing triggers for libc-bin (2.27-3) ... Setting up python3-pexpect (4.6.0-1) ... Processing triggers for man-db (2.8.3-2) ... Setting up libappindicator3-1:amd64 (0.4.92-5) ... Setting up libgslcblas0:amd64 (2.5+dfsg-4) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Setting up clipit (1.4.4-1) ... Installing new version of config file /etc/xdg/autostart/clipit-startup.desktop ... Setting up libgsl23:amd64 (2.5+dfsg-4) ... Processing triggers for libc-bin (2.27-3) ... Log ended: 2018-07-04 10:57:20 Log started: 2018-07-05 10:10:36 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135143 files and directories currently installed.) Preparing to unpack .../00-libcupsppdc1_2.2.8-4_amd64.deb ... Unpacking libcupsppdc1:amd64 (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../01-libcupsmime1_2.2.8-4_amd64.deb ... Unpacking libcupsmime1:amd64 (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../02-libcupsimage2_2.2.8-4_amd64.deb ... Unpacking libcupsimage2:amd64 (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../03-libcupscgi1_2.2.8-4_amd64.deb ... Unpacking libcupscgi1:amd64 (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../04-cups-core-drivers_2.2.8-4_amd64.deb ... Unpacking cups-core-drivers (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../05-cups-server-common_2.2.8-4_all.deb ... Unpacking cups-server-common (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../06-cups-ipp-utils_2.2.8-4_amd64.deb ... Unpacking cups-ipp-utils (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../07-cups-common_2.2.8-4_all.deb ... Unpacking cups-common (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../08-cups-client_2.2.8-4_amd64.deb ... Unpacking cups-client (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../09-cups-ppdc_2.2.8-4_amd64.deb ... Unpacking cups-ppdc (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../10-cups-daemon_2.2.8-4_amd64.deb ... Unpacking cups-daemon (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../11-libcups2_2.2.8-4_amd64.deb ... Unpacking libcups2:amd64 (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../12-cups_2.2.8-4_amd64.deb ... Unpacking cups (2.2.8-4) over (2.2.8-3.0nosystemd1) ... Preparing to unpack .../13-smtube_18.3.0-1_amd64.deb ... Unpacking smtube (18.3.0-1) over (18.3.0-1~mx17+1) ... Processing triggers for ufw (0.35-6) ... Setting up cups-server-common (2.2.8-4) ... Processing triggers for mime-support (3.61) ... Processing triggers for desktop-file-utils (0.23-3) ... Setting up cups-common (2.2.8-4) ... Setting up smtube (18.3.0-1) ... Processing triggers for libc-bin (2.27-3) ... Processing triggers for man-db (2.8.3-2) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Setting up libcups2:amd64 (2.2.8-4) ... Setting up cups-ipp-utils (2.2.8-4) ... Setting up libcupsmime1:amd64 (2.2.8-4) ... Setting up cups-daemon (2.2.8-4) ... [....] Restarting Common Unix Printing System: cupsd[?25l7[1G[[32m ok [39;49m8[?12l[?25h. Setting up cups-core-drivers (2.2.8-4) ... Setting up libcupsppdc1:amd64 (2.2.8-4) ... Setting up libcupsimage2:amd64 (2.2.8-4) ... Setting up cups-client (2.2.8-4) ... Setting up libcupscgi1:amd64 (2.2.8-4) ... Setting up cups-ppdc (2.2.8-4) ... Setting up cups (2.2.8-4) ... Updating PPD files for cups ... Processing triggers for libc-bin (2.27-3) ... Log ended: 2018-07-05 10:11:18 Log started: 2018-07-05 10:11:40 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135145 files and directories currently installed.) Removing libtorrent19:amd64 (0.13.6-2) ... Processing triggers for libc-bin (2.27-3) ... Log ended: 2018-07-05 10:11:42 Log started: 2018-07-11 09:39:57 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135140 files and directories currently installed.) Preparing to unpack .../bash_4.4.18-3.1_amd64.deb ... Unpacking bash (4.4.18-3.1) over (4.4.18-3) ... Setting up bash (4.4.18-3.1) ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135140 files and directories currently installed.) Preparing to unpack .../archives/sed_4.5-1_amd64.deb ... Unpacking sed (4.5-1) over (4.4-2) ... Setting up sed (4.5-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135140 files and directories currently installed.) Preparing to unpack .../00-libcupsmime1_2.2.8-4.0nosystemd1_amd64.deb ... Unpacking libcupsmime1:amd64 (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../01-cups-core-drivers_2.2.8-4.0nosystemd1_amd64.deb ... Unpacking cups-core-drivers (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../02-cups-server-common_2.2.8-4.0nosystemd1_all.deb ... Unpacking cups-server-common (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../03-cups-ipp-utils_2.2.8-4.0nosystemd1_amd64.deb ... Unpacking cups-ipp-utils (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../04-libcupsimage2_2.2.8-4.0nosystemd1_amd64.deb ... Unpacking libcupsimage2:amd64 (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../05-cups-common_2.2.8-4.0nosystemd1_all.deb ... Unpacking cups-common (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../06-cups-client_2.2.8-4.0nosystemd1_amd64.deb ... Unpacking cups-client (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../07-libcupscgi1_2.2.8-4.0nosystemd1_amd64.deb ... Unpacking libcupscgi1:amd64 (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../08-libcupsppdc1_2.2.8-4.0nosystemd1_amd64.deb ... Unpacking libcupsppdc1:amd64 (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../09-cups-ppdc_2.2.8-4.0nosystemd1_amd64.deb ... Unpacking cups-ppdc (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../10-cups-daemon_2.2.8-4.0nosystemd1_amd64.deb ... Unpacking cups-daemon (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../11-libcups2_2.2.8-4.0nosystemd1_amd64.deb ... Unpacking libcups2:amd64 (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../12-cups_2.2.8-4.0nosystemd1_amd64.deb ... Unpacking cups (2.2.8-4.0nosystemd1) over (2.2.8-4) ... Preparing to unpack .../13-libsystemd0_239-5_amd64.deb ... Unpacking libsystemd0:amd64 (239-5) over (238-5) ... Preparing to unpack .../14-udev_239-5_amd64.deb ... Unpacking udev (239-5) over (238-5) ... Preparing to unpack .../15-libudev1_239-5_amd64.deb ... Unpacking libudev1:amd64 (239-5) over (238-5) ... Setting up libudev1:amd64 (239-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135138 files and directories currently installed.) Preparing to unpack .../00-iproute2_4.17.0-2_amd64.deb ... Unpacking iproute2 (4.17.0-2) over (4.16.0-4) ... Preparing to unpack .../01-dict_1.12.1+dfsg-7_amd64.deb ... Unpacking dict (1.12.1+dfsg-7) over (1.12.1+dfsg-6) ... Preparing to unpack .../02-dictionaries-common_1.27.7_all.deb ... Leaving 'diversion of /usr/share/dict/words to /usr/share/dict/words.pre-dictionaries-common by dictionaries-common' Unpacking dictionaries-common (1.27.7) over (1.27.6) ... Preparing to unpack .../03-glib-networking-common_2.56.1-1_all.deb ... Unpacking glib-networking-common (2.56.1-1) over (2.56.0-1) ... Preparing to unpack .../04-glib-networking_2.56.1-1_amd64.deb ... Unpacking glib-networking:amd64 (2.56.1-1) over (2.56.0-1) ... Preparing to unpack .../05-glib-networking-services_2.56.1-1_amd64.deb ... Unpacking glib-networking-services (2.56.1-1) over (2.56.0-1) ... Preparing to unpack .../06-libhd21_21.56-1_amd64.deb ... Unpacking libhd21:amd64 (21.56-1) over (21.55-1) ... Preparing to unpack .../07-hwinfo_21.56-1_amd64.deb ... Unpacking hwinfo (21.56-1) over (21.55-1) ... Preparing to unpack .../08-libapparmor1_2.12-5_amd64.deb ... Unpacking libapparmor1:amd64 (2.12-5) over (2.12-4+b1) ... Preparing to unpack .../09-libboost-system1.62.0_1.62.0+dfsg-6_amd64.deb ... Unpacking libboost-system1.62.0:amd64 (1.62.0+dfsg-6) over (1.62.0+dfsg-5.1) ... Preparing to unpack .../10-libboost-chrono1.62.0_1.62.0+dfsg-6_amd64.deb ... Unpacking libboost-chrono1.62.0:amd64 (1.62.0+dfsg-6) over (1.62.0+dfsg-5.1) ... Preparing to unpack .../11-libboost-date-time1.62.0_1.62.0+dfsg-6_amd64.deb ... Unpacking libboost-date-time1.62.0:amd64 (1.62.0+dfsg-6) over (1.62.0+dfsg-5.1) ... Preparing to unpack .../12-libboost-filesystem1.62.0_1.62.0+dfsg-6_amd64.deb ... Unpacking libboost-filesystem1.62.0:amd64 (1.62.0+dfsg-6) over (1.62.0+dfsg-5.1) ... Preparing to unpack .../13-libboost-iostreams1.62.0_1.62.0+dfsg-6_amd64.deb ... Unpacking libboost-iostreams1.62.0:amd64 (1.62.0+dfsg-6) over (1.62.0+dfsg-5.1) ... Preparing to unpack .../14-libboost-thread1.62.0_1.62.0+dfsg-6_amd64.deb ... Unpacking libboost-thread1.62.0:amd64 (1.62.0+dfsg-6) over (1.62.0+dfsg-5.1) ... Preparing to unpack .../15-libboost-locale1.62.0_1.62.0+dfsg-6_amd64.deb ... Unpacking libboost-locale1.62.0:amd64 (1.62.0+dfsg-6) over (1.62.0+dfsg-5.1) ... Preparing to unpack .../16-libboost-program-options1.62.0_1.62.0+dfsg-6_amd64.deb ... Unpacking libboost-program-options1.62.0:amd64 (1.62.0+dfsg-6) over (1.62.0+dfsg-5.1) ... Preparing to unpack .../17-libboost-python1.62.0_1.62.0+dfsg-6_amd64.deb ... Unpacking libboost-python1.62.0 (1.62.0+dfsg-6) over (1.62.0+dfsg-5.1) ... Preparing to unpack .../18-libegl-mesa0_18.1.3-1_amd64.deb ... Unpacking libegl-mesa0:amd64 (18.1.3-1) over (18.1.2-1) ... Preparing to unpack .../19-libgbm1_18.1.3-1_amd64.deb ... Unpacking libgbm1:amd64 (18.1.3-1) over (18.1.2-1) ... Preparing to unpack .../20-libgl1-mesa-dri_18.1.3-1_amd64.deb ... Unpacking libgl1-mesa-dri:amd64 (18.1.3-1) over (18.1.2-1) ... Preparing to unpack .../21-libglx-mesa0_18.1.3-1_amd64.deb ... Unpacking libglx-mesa0:amd64 (18.1.3-1) over (18.1.2-1) ... Preparing to unpack .../22-libglapi-mesa_18.1.3-1_amd64.deb ... Unpacking libglapi-mesa:amd64 (18.1.3-1) over (18.1.2-1) ... Preparing to unpack .../23-libegl1-mesa_18.1.3-1_amd64.deb ... Unpacking libegl1-mesa:amd64 (18.1.3-1) over (18.1.2-1) ... Preparing to unpack .../24-libgl1-mesa-glx_18.1.3-1_amd64.deb ... Unpacking libgl1-mesa-glx:amd64 (18.1.3-1) over (18.1.2-1) ... Preparing to unpack .../25-libgphoto2-port12_2.5.18-2_amd64.deb ... Unpacking libgphoto2-port12:amd64 (2.5.18-2) over (2.5.18-1) ... Preparing to unpack .../26-libgphoto2-6_2.5.18-2_amd64.deb ... Unpacking libgphoto2-6:amd64 (2.5.18-2) over (2.5.18-1) ... Preparing to unpack .../27-libharfbuzz0b_1.8.2-2_amd64.deb ... Unpacking libharfbuzz0b:amd64 (1.8.2-2) over (1.8.1-1) ... Preparing to unpack .../28-libharfbuzz-icu0_1.8.2-2_amd64.deb ... Unpacking libharfbuzz-icu0:amd64 (1.8.2-2) over (1.8.1-1) ... Preparing to unpack .../29-libnorm1_1.5.7+dfsg1-1_amd64.deb ... Unpacking libnorm1:amd64 (1.5.7+dfsg1-1) over (1.5r6+dfsg1-9) ... Preparing to unpack .../30-libnss-myhostname_239-5_amd64.deb ... Unpacking libnss-myhostname:amd64 (239-5) over (238-5) ... Preparing to unpack .../31-libplist3_2.0.0-4_amd64.deb ... Unpacking libplist3:amd64 (2.0.0-4) over (2.0.0-3) ... Preparing to unpack .../32-libupower-glib3_0.99.8-2_amd64.deb ... Unpacking libupower-glib3:amd64 (0.99.8-2) over (0.99.8-1) ... Preparing to unpack .../33-libwayland-egl1-mesa_18.1.3-1_amd64.deb ... Unpacking libwayland-egl1-mesa:amd64 (18.1.3-1) over (18.1.2-1) ... Preparing to unpack .../34-libxapian30_1.4.6-2_amd64.deb ... Unpacking libxapian30:amd64 (1.4.6-2) over (1.4.5-1) ... Preparing to unpack .../35-libxatracker2_18.1.3-1_amd64.deb ... Unpacking libxatracker2:amd64 (18.1.3-1) over (18.1.2-1) ... Preparing to unpack .../36-python-numpy_1%3a1.14.5-1+b1_amd64.deb ... Unpacking python-numpy (1:1.14.5-1+b1) over (1:1.14.4-1) ... Preparing to unpack .../37-sshfs_2.10+repack-2_amd64.deb ... Unpacking sshfs (2.10+repack-2) over (2.10-1) ... Preparing to unpack .../38-upower_0.99.8-2_amd64.deb ... Unpacking upower (0.99.8-2) over (0.99.8-1) ... Preparing to unpack .../39-xserver-xorg-input-mouse_1%3a1.9.3-1_amd64.deb ... Unpacking xserver-xorg-input-mouse (1:1.9.3-1) over (1:1.9.2-1+b1) ... Setting up libxapian30:amd64 (1.4.6-2) ... Processing triggers for ufw (0.35-6) ... Setting up libgphoto2-port12:amd64 (2.5.18-2) ... Setting up cups-server-common (2.2.8-4.0nosystemd1) ... Setting up libboost-date-time1.62.0:amd64 (1.62.0+dfsg-6) ... Setting up glib-networking-common (2.56.1-1) ... Setting up xserver-xorg-input-mouse (1:1.9.3-1) ... Setting up libnss-myhostname:amd64 (239-5) ... Setting up dictionaries-common (1.27.7) ... Setting up libboost-program-options1.62.0:amd64 (1.62.0+dfsg-6) ... Setting up cups-common (2.2.8-4.0nosystemd1) ... Processing triggers for libglib2.0-0:amd64 (2.56.1-2) ... Setting up libgbm1:amd64 (18.1.3-1) ... Setting up dict (1.12.1+dfsg-7) ... Setting up libplist3:amd64 (2.0.0-4) ... Setting up libsystemd0:amd64 (239-5) ... Setting up libgphoto2-6:amd64 (2.5.18-2) ... Processing triggers for menu (2.1.47+b1) ... Setting up libharfbuzz0b:amd64 (1.8.2-2) ... Setting up glib-networking-services (2.56.1-1) ... Setting up libglapi-mesa:amd64 (18.1.3-1) ... Setting up libxatracker2:amd64 (18.1.3-1) ... Setting up iproute2 (4.17.0-2) ... Installing new version of config file /etc/iproute2/ematch_map ... Installing new version of config file /etc/iproute2/rt_protos ... Setting up python-numpy (1:1.14.5-1+b1) ... Setting up libboost-iostreams1.62.0:amd64 (1.62.0+dfsg-6) ... Setting up libnorm1:amd64 (1.5.7+dfsg1-1) ... Processing triggers for libc-bin (2.27-3) ... Setting up udev (239-5) ... [....] Stopping the hotplug events dispatcher: systemd-udevd[?25l7[1G[[32m ok [39;49m8[?12l[?25h. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 239 [?25l7[1G[[32m ok [39;49m8[?12l[?25h. update-initramfs: deferring update (trigger activated) Setting up libapparmor1:amd64 (2.12-5) ... Setting up glib-networking:amd64 (2.56.1-1) ... Setting up libwayland-egl1-mesa:amd64 (18.1.3-1) ... Setting up libupower-glib3:amd64 (0.99.8-2) ... Processing triggers for man-db (2.8.3-2) ... Setting up libhd21:amd64 (21.56-1) ... Setting up libboost-python1.62.0 (1.62.0+dfsg-6) ... Setting up libegl-mesa0:amd64 (18.1.3-1) ... Setting up sshfs (2.10+repack-2) ... Processing triggers for dbus (1.12.8-3.0+nosystemd1) ... Setting up libboost-system1.62.0:amd64 (1.62.0+dfsg-6) ... Setting up libcups2:amd64 (2.2.8-4.0nosystemd1) ... Setting up libegl1-mesa:amd64 (18.1.3-1) ... Setting up libharfbuzz-icu0:amd64 (1.8.2-2) ... Setting up libboost-thread1.62.0:amd64 (1.62.0+dfsg-6) ... Setting up hwinfo (21.56-1) ... Setting up cups-ipp-utils (2.2.8-4.0nosystemd1) ... Setting up libgl1-mesa-dri:amd64 (18.1.3-1) ... Setting up libcupsmime1:amd64 (2.2.8-4.0nosystemd1) ... Setting up cups-daemon (2.2.8-4.0nosystemd1) ... [....] Restarting Common Unix Printing System: cupsd[?25l7[1G[[32m ok [39;49m8[?12l[?25h. Setting up upower (0.99.8-2) ... Setting up cups-core-drivers (2.2.8-4.0nosystemd1) ... Setting up libcupsppdc1:amd64 (2.2.8-4.0nosystemd1) ... Setting up libcupsimage2:amd64 (2.2.8-4.0nosystemd1) ... Setting up libboost-filesystem1.62.0:amd64 (1.62.0+dfsg-6) ... Setting up cups-client (2.2.8-4.0nosystemd1) ... Setting up libcupscgi1:amd64 (2.2.8-4.0nosystemd1) ... Setting up libboost-chrono1.62.0:amd64 (1.62.0+dfsg-6) ... Setting up libglx-mesa0:amd64 (18.1.3-1) ... Setting up cups-ppdc (2.2.8-4.0nosystemd1) ... Setting up cups (2.2.8-4.0nosystemd1) ... Updating PPD files for cups ... Setting up libboost-locale1.62.0:amd64 (1.62.0+dfsg-6) ... Setting up libgl1-mesa-glx:amd64 (18.1.3-1) ... Processing triggers for dictionaries-common (1.27.7) ... Processing triggers for initramfs-tools (0.130) ... update-initramfs: Generating /boot/initrd.img-4.4.10-antix.1-amd64-smp cryptsetup: WARNING: The initramfs image may not contain cryptsetup binaries nor crypto modules. If that's on purpose, you may want to uninstall the 'cryptsetup-initramfs' package in order to disable the cryptsetup initramfs integration and avoid this warning. I: The initramfs will attempt to resume from /dev/sda2 I: (UUID=f34a5d1e-9670-4b11-9602-8eb1338a376d) I: Set the RESUME variable to override this. Processing triggers for libc-bin (2.27-3) ... Log ended: 2018-07-11 09:42:01 Log started: 2018-07-12 13:06:35 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135139 files and directories currently installed.) Preparing to unpack .../libapt-pkg5.0_1.6.3_amd64.deb ... Unpacking libapt-pkg5.0:amd64 (1.6.3) over (1.6.2) ... Setting up libapt-pkg5.0:amd64 (1.6.3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135139 files and directories currently installed.) Preparing to unpack .../libapt-inst2.0_1.6.3_amd64.deb ... Unpacking libapt-inst2.0:amd64 (1.6.3) over (1.6.2) ... Preparing to unpack .../archives/apt_1.6.3_amd64.deb ... Unpacking apt (1.6.3) over (1.6.2) ... Setting up apt (1.6.3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135139 files and directories currently installed.) Preparing to unpack .../apt-utils_1.6.3_amd64.deb ... Unpacking apt-utils (1.6.3) over (1.6.2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135138 files and directories currently installed.) Removing cherrytree (0.37.6-1) ... Removing python-appindicator (0.4.92-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 134949 files and directories currently installed.) Preparing to unpack .../libappindicator3-1_0.4.92-6_amd64.deb ... Unpacking libappindicator3-1:amd64 (0.4.92-6) over (0.4.92-5) ... Preparing to unpack .../clipit_1.4.4-2_amd64.deb ... Unpacking clipit (1.4.4-2) over (1.4.4-1) ... Preparing to unpack .../libappindicator1_0.4.92-6_amd64.deb ... Unpacking libappindicator1:amd64 (0.4.92-6) over (0.4.92-5) ... Setting up libapt-inst2.0:amd64 (1.6.3) ... Processing triggers for mime-support (3.61) ... Processing triggers for desktop-file-utils (0.23-3) ... Setting up apt-utils (1.6.3) ... Setting up libappindicator1:amd64 (0.4.92-6) ... Processing triggers for libc-bin (2.27-3) ... Processing triggers for man-db (2.8.3-2) ... Processing triggers for shared-mime-info (1.9-2) ... Setting up libappindicator3-1:amd64 (0.4.92-6) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Setting up clipit (1.4.4-2) ... Processing triggers for libc-bin (2.27-3) ... Log ended: 2018-07-12 13:07:47 Log started: 2018-07-12 13:08:26 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 134948 files and directories currently installed.) Removing libappindicator1:amd64 (0.4.92-6) ... Removing libdbusmenu-gtk4:amd64 (16.04.1+17.04.20170109.1-5) ... Removing python-gtksourceview2 (2.10.1-3) ... Removing libgtksourceview2.0-0:amd64 (2.10.5-3) ... Removing libgtksourceview2.0-common (2.10.5-3) ... Removing libindicator7:amd64 (0.5.0-3+b1) ... Removing python-chardet (3.0.4-1) ... Removing python-enchant (2.0.0-1) ... Processing triggers for libc-bin (2.27-3) ... Processing triggers for man-db (2.8.3-2) ... Log ended: 2018-07-12 13:08:33 Log started: 2018-07-13 11:07:41 Selecting previously unselected package systemd. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 134635 files and directories currently installed.) Preparing to unpack .../systemd_239-5_amd64.deb ... Unpacking systemd (239-5) ... Setting up systemd (239-5) ... Created symlink /etc/systemd/system/dbus-org.freedesktop.timesync1.service â /lib/systemd/system/systemd-timesyncd.service. Created symlink /etc/systemd/system/sysinit.target.wants/systemd-timesyncd.service â /lib/systemd/system/systemd-timesyncd.service. Initializing machine ID from D-Bus machine ID. dpkg: sysvinit-core: dependency problems, but removing anyway as you requested: init depends on systemd-sysv | sysvinit-core; however: Package systemd-sysv is not installed. Package sysvinit-core is to be removed. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135367 files and directories currently installed.) Removing sysvinit-core (2.88dsf-59.10) ... Selecting previously unselected package systemd-sysv. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135344 files and directories currently installed.) Preparing to unpack .../systemd-sysv_239-5_amd64.deb ... Unpacking systemd-sysv (239-5) ... Setting up systemd-sysv (239-5) ... Generating grub configuration file ... Found background: /usr/share/wallpaper/back.jpg Found background image: /usr/share/wallpaper/back.jpg Found linux image: /boot/vmlinuz-4.4.10-antix.1-amd64-smp Found initrd image: /boot/initrd.img-4.4.10-antix.1-amd64-smp Found memtest86+ image: /boot/memtest86+.bin Found memtest86+ multiboot image: /boot/memtest86+_multiboot.bin done Selecting previously unselected package libpam-systemd:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135361 files and directories currently installed.) Preparing to unpack .../00-libpam-systemd_239-5_amd64.deb ... Unpacking libpam-systemd:amd64 (239-5) ... Preparing to unpack .../01-openssh-sftp-server_1%3a7.7p1-3_amd64.deb ... Unpacking openssh-sftp-server (1:7.7p1-3) over (1:7.7p1-2.0nosystemd1) ... Preparing to unpack .../02-openssh-server_1%3a7.7p1-3_amd64.deb ... Unpacking openssh-server (1:7.7p1-3) over (1:7.7p1-2.0nosystemd1) ... Preparing to unpack .../03-openssh-client_1%3a7.7p1-3_amd64.deb ... Unpacking openssh-client (1:7.7p1-3) over (1:7.7p1-2.0nosystemd1) ... Preparing to unpack .../04-libavutil55_7%3a3.4.3-1_amd64.deb ... Unpacking libavutil55:amd64 (7:3.4.3-1) over (7:3.4.2-2+b2) ... Preparing to unpack .../05-libswresample2_7%3a3.4.3-1_amd64.deb ... Unpacking libswresample2:amd64 (7:3.4.3-1) over (7:3.4.2-2+b2) ... Preparing to unpack .../06-libavcodec-extra57_7%3a3.4.3-1_amd64.deb ... Unpacking libavcodec-extra57:amd64 (7:3.4.3-1) over (7:3.4.2-2+b2) ... Preparing to unpack .../07-libavformat57_7%3a3.4.3-1_amd64.deb ... Unpacking libavformat57:amd64 (7:3.4.3-1) over (7:3.4.2-2+b2) ... Preparing to unpack .../08-libavresample3_7%3a3.4.3-1_amd64.deb ... Unpacking libavresample3:amd64 (7:3.4.3-1) over (7:3.4.2-2+b2) ... Preparing to unpack .../09-libpostproc54_7%3a3.4.3-1_amd64.deb ... Unpacking libpostproc54:amd64 (7:3.4.3-1) over (7:3.4.2-2+b2) ... Preparing to unpack .../10-libswscale4_7%3a3.4.3-1_amd64.deb ... Unpacking libswscale4:amd64 (7:3.4.3-1) over (7:3.4.2-2+b2) ... Preparing to unpack .../11-libavfilter6_7%3a3.4.3-1_amd64.deb ... Unpacking libavfilter6:amd64 (7:3.4.3-1) over (7:3.4.2-2+b2) ... Preparing to unpack .../12-libavdevice57_7%3a3.4.3-1_amd64.deb ... Unpacking libavdevice57:amd64 (7:3.4.3-1) over (7:3.4.2-2+b2) ... Preparing to unpack .../13-ffmpeg_7%3a3.4.3-1_amd64.deb ... Unpacking ffmpeg (7:3.4.3-1) over (7:3.4.2-2+b2) ... Preparing to unpack .../14-policykit-1_0.105-21_amd64.deb ... Unpacking policykit-1 (0.105-21) over (0.105-20.0nosystemd1) ... Preparing to unpack .../15-libpolkit-backend-1-0_0.105-21_amd64.deb ... Unpacking libpolkit-backend-1-0:amd64 (0.105-21) over (0.105-20.0nosystemd1) ... Preparing to unpack .../16-gir1.2-polkit-1.0_0.105-21_amd64.deb ... Unpacking gir1.2-polkit-1.0 (0.105-21) over (0.105-20.0nosystemd1) ... Preparing to unpack .../17-libpolkit-agent-1-0_0.105-21_amd64.deb ... Unpacking libpolkit-agent-1-0:amd64 (0.105-21) over (0.105-20.0nosystemd1) ... Preparing to unpack .../18-libpolkit-gobject-1-0_0.105-21_amd64.deb ... Unpacking libpolkit-gobject-1-0:amd64 (0.105-21) over (0.105-20.0nosystemd1) ... Preparing to unpack .../19-libavcodec-extra_7%3a3.4.3-1_all.deb ... Unpacking libavcodec-extra (7:3.4.3-1) over (7:3.4.2-2) ... Preparing to unpack .../20-mupdf_1.13.0+ds1-2_amd64.deb ... Unpacking mupdf (1.13.0+ds1-2) over (1.13.0+ds1-1) ... Processing triggers for ufw (0.35-6) ... Setting up libpam-systemd:amd64 (239-5) ... Setting up libavutil55:amd64 (7:3.4.3-1) ... Processing triggers for mime-support (3.61) ... Processing triggers for desktop-file-utils (0.23-3) ... Setting up libswresample2:amd64 (7:3.4.3-1) ... Setting up libavcodec-extra57:amd64 (7:3.4.3-1) ... Processing triggers for libc-bin (2.27-3) ... Setting up libswscale4:amd64 (7:3.4.3-1) ... Processing triggers for systemd (239-5) ... Setting up libpostproc54:amd64 (7:3.4.3-1) ... Processing triggers for man-db (2.8.3-2) ... Setting up mupdf (1.13.0+ds1-2) ... Processing triggers for dbus (1.12.8-3.0+nosystemd1) ... Setting up openssh-client (1:7.7p1-3) ... Setting up libavformat57:amd64 (7:3.4.3-1) ... Setting up libpolkit-gobject-1-0:amd64 (0.105-21) ... Setting up libavresample3:amd64 (7:3.4.3-1) ... Setting up libpolkit-agent-1-0:amd64 (0.105-21) ... Setting up gir1.2-polkit-1.0 (0.105-21) ... Setting up libavfilter6:amd64 (7:3.4.3-1) ... Setting up libavcodec-extra (7:3.4.3-1) ... Setting up libpolkit-backend-1-0:amd64 (0.105-21) ... Setting up openssh-sftp-server (1:7.7p1-3) ... Setting up libavdevice57:amd64 (7:3.4.3-1) ... Setting up policykit-1 (0.105-21) ... Setting up openssh-server (1:7.7p1-3) ... [....] Restarting OpenBSD Secure Shell server: sshd[?25l7[1G[[32m ok [39;49m8[?12l[?25h. Setting up ffmpeg (7:3.4.3-1) ... Processing triggers for libc-bin (2.27-3) ... Log ended: 2018-07-13 11:08:47 Log started: 2018-07-17 14:53:15 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135362 files and directories currently installed.) Preparing to unpack .../libext2fs2_1.44.3-1_amd64.deb ... Unpacking libext2fs2:amd64 (1.44.3-1) over (1.44.2-1) ... Setting up libext2fs2:amd64 (1.44.3-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135362 files and directories currently installed.) Preparing to unpack .../00-e2fsprogs_1.44.3-1_amd64.deb ... Unpacking e2fsprogs (1.44.3-1) over (1.44.2-1) ... Preparing to unpack .../01-cups-ipp-utils_2.2.8-5.0nosystemd1_amd64.deb ... Unpacking cups-ipp-utils (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../02-libcupscgi1_2.2.8-5.0nosystemd1_amd64.deb ... Unpacking libcupscgi1:amd64 (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../03-libcupsimage2_2.2.8-5.0nosystemd1_amd64.deb ... Unpacking libcupsimage2:amd64 (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../04-cups-core-drivers_2.2.8-5.0nosystemd1_amd64.deb ... Unpacking cups-core-drivers (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../05-cups-server-common_2.2.8-5.0nosystemd1_all.deb ... Unpacking cups-server-common (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../06-cups-common_2.2.8-5.0nosystemd1_all.deb ... Unpacking cups-common (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../07-cups-client_2.2.8-5.0nosystemd1_amd64.deb ... Unpacking cups-client (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../08-libquadmath0_8.1.0-10_amd64.deb ... Unpacking libquadmath0:amd64 (8.1.0-10) over (8.1.0-9) ... Preparing to unpack .../09-libitm1_8.1.0-10_amd64.deb ... Unpacking libitm1:amd64 (8.1.0-10) over (8.1.0-9) ... Preparing to unpack .../10-gcc-8-base_8.1.0-10_amd64.deb ... Unpacking gcc-8-base:amd64 (8.1.0-10) over (8.1.0-9) ... Setting up gcc-8-base:amd64 (8.1.0-10) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135364 files and directories currently installed.) Preparing to unpack .../libgcc1_1%3a8.1.0-10_amd64.deb ... Unpacking libgcc1:amd64 (1:8.1.0-10) over (1:8.1.0-9) ... Setting up libgcc1:amd64 (1:8.1.0-10) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135364 files and directories currently installed.) Preparing to unpack .../0-libmpx2_8.1.0-10_amd64.deb ... Unpacking libmpx2:amd64 (8.1.0-10) over (8.1.0-9) ... Preparing to unpack .../1-liblsan0_8.1.0-10_amd64.deb ... Unpacking liblsan0:amd64 (8.1.0-10) over (8.1.0-9) ... Preparing to unpack .../2-libtsan0_8.1.0-10_amd64.deb ... Unpacking libtsan0:amd64 (8.1.0-10) over (8.1.0-9) ... Preparing to unpack .../3-libcc1-0_8.1.0-10_amd64.deb ... Unpacking libcc1-0:amd64 (8.1.0-10) over (8.1.0-9) ... Preparing to unpack .../4-libatomic1_8.1.0-10_amd64.deb ... Unpacking libatomic1:amd64 (8.1.0-10) over (8.1.0-9) ... Preparing to unpack .../5-libgomp1_8.1.0-10_amd64.deb ... Unpacking libgomp1:amd64 (8.1.0-10) over (8.1.0-9) ... Preparing to unpack .../6-libstdc++6_8.1.0-10_amd64.deb ... Unpacking libstdc++6:amd64 (8.1.0-10) over (8.1.0-9) ... Setting up libstdc++6:amd64 (8.1.0-10) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135364 files and directories currently installed.) Preparing to unpack .../0-libcupsppdc1_2.2.8-5.0nosystemd1_amd64.deb ... Unpacking libcupsppdc1:amd64 (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../1-libcupsmime1_2.2.8-5.0nosystemd1_amd64.deb ... Unpacking libcupsmime1:amd64 (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../2-cups-ppdc_2.2.8-5.0nosystemd1_amd64.deb ... Unpacking cups-ppdc (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../3-cups-daemon_2.2.8-5.0nosystemd1_amd64.deb ... Unpacking cups-daemon (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../4-libcups2_2.2.8-5.0nosystemd1_amd64.deb ... Unpacking libcups2:amd64 (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../5-cups_2.2.8-5.0nosystemd1_amd64.deb ... Unpacking cups (2.2.8-5.0nosystemd1) over (2.2.8-4.0nosystemd1) ... Preparing to unpack .../6-asunder_2.9.3-2_amd64.deb ... Unpacking asunder (2.9.3-2) over (2.9.3-1) ... Preparing to unpack .../7-libunistring2_0.9.10-1_amd64.deb ... Unpacking libunistring2:amd64 (0.9.10-1) over (0.9.8-1) ... Setting up libunistring2:amd64 (0.9.10-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135365 files and directories currently installed.) Preparing to unpack .../00-gir1.2-polkit-1.0_0.105-21.0nosystemd1_amd64.deb ... Unpacking gir1.2-polkit-1.0 (0.105-21.0nosystemd1) over (0.105-21) ... Preparing to unpack .../01-policykit-1_0.105-21.0nosystemd1_amd64.deb ... Created symlink /run/systemd/system/polkit.service â /dev/null. Unpacking policykit-1 (0.105-21.0nosystemd1) over (0.105-21) ... Preparing to unpack .../02-libpolkit-backend-1-0_0.105-21.0nosystemd1_amd64.deb ... Unpacking libpolkit-backend-1-0:amd64 (0.105-21.0nosystemd1) over (0.105-21) ... Preparing to unpack .../03-libpolkit-agent-1-0_0.105-21.0nosystemd1_amd64.deb ... Unpacking libpolkit-agent-1-0:amd64 (0.105-21.0nosystemd1) over (0.105-21) ... Preparing to unpack .../04-libpolkit-gobject-1-0_0.105-21.0nosystemd1_amd64.deb ... Unpacking libpolkit-gobject-1-0:amd64 (0.105-21.0nosystemd1) over (0.105-21) ... Preparing to unpack .../05-openssh-sftp-server_1%3a7.7p1-3.0nosystemd1_amd64.deb ... Unpacking openssh-sftp-server (1:7.7p1-3.0nosystemd1) over (1:7.7p1-3) ... Preparing to unpack .../06-libcom-err2_1.44.3-1_amd64.deb ... Unpacking libcom-err2:amd64 (1.44.3-1) over (1.44.2-1) ... Preparing to unpack .../07-openssh-server_1%3a7.7p1-3.0nosystemd1_amd64.deb ... Unpacking openssh-server (1:7.7p1-3.0nosystemd1) over (1:7.7p1-3) ... Preparing to unpack .../08-openssh-client_1%3a7.7p1-3.0nosystemd1_amd64.deb ... Unpacking openssh-client (1:7.7p1-3.0nosystemd1) over (1:7.7p1-3) ... Preparing to unpack .../09-binutils-x86-64-linux-gnu_2.30.90.20180710-1_amd64.deb ... Unpacking binutils-x86-64-linux-gnu (2.30.90.20180710-1) over (2.30-22) ... Preparing to unpack .../10-binutils-common_2.30.90.20180710-1_amd64.deb ... Unpacking binutils-common:amd64 (2.30.90.20180710-1) over (2.30-22) ... Preparing to unpack .../11-binutils_2.30.90.20180710-1_amd64.deb ... Unpacking binutils (2.30.90.20180710-1) over (2.30-22) ... Preparing to unpack .../12-libbinutils_2.30.90.20180710-1_amd64.deb ... Unpacking libbinutils:amd64 (2.30.90.20180710-1) over (2.30-22) ... Preparing to unpack .../13-bubblewrap_0.3.0-1_amd64.deb ... Unpacking bubblewrap (0.3.0-1) over (0.2.1-1) ... Preparing to unpack .../14-libasan4_7.3.0-25_amd64.deb ... Unpacking libasan4:amd64 (7.3.0-25) over (7.3.0-24) ... Preparing to unpack .../15-libubsan0_7.3.0-25_amd64.deb ... Unpacking libubsan0:amd64 (7.3.0-25) over (7.3.0-24) ... Preparing to unpack .../16-libcilkrts5_7.3.0-25_amd64.deb ... Unpacking libcilkrts5:amd64 (7.3.0-25) over (7.3.0-24) ... Preparing to unpack .../17-gcc-7_7.3.0-25_amd64.deb ... Unpacking gcc-7 (7.3.0-25) over (7.3.0-24) ... Preparing to unpack .../18-libgcc-7-dev_7.3.0-25_amd64.deb ... Unpacking libgcc-7-dev:amd64 (7.3.0-25) over (7.3.0-24) ... Preparing to unpack .../19-libgfortran4_7.3.0-25_amd64.deb ... Unpacking libgfortran4:amd64 (7.3.0-25) over (7.3.0-24) ... Preparing to unpack .../20-cpp-7_7.3.0-25_amd64.deb ... Unpacking cpp-7 (7.3.0-25) over (7.3.0-24) ... Preparing to unpack .../21-gcc-7-base_7.3.0-25_amd64.deb ... Unpacking gcc-7-base:amd64 (7.3.0-25) over (7.3.0-24) ... Preparing to unpack .../22-e2fslibs_1.44.3-1_amd64.deb ... Unpacking e2fslibs:amd64 (1.44.3-1) over (1.44.2-1) ... Preparing to unpack .../23-libpng16-16_1.6.34-2_amd64.deb ... Unpacking libpng16-16:amd64 (1.6.34-2) over (1.6.34-1) ... Preparing to unpack .../24-feh_2.27-1_amd64.deb ... Unpacking feh (2.27-1) over (2.26.3-1+b1) ... Preparing to unpack .../25-fonts-opensymbol_2%3a102.10+LibO6.0.6~rc1-1_all.deb ... Unpacking fonts-opensymbol (2:102.10+LibO6.0.6~rc1-1) over (2:102.10+LibO6.0.5-1) ... Preparing to unpack .../26-html2text_1.3.2a-23_amd64.deb ... Unpacking html2text (1.3.2a-23) over (1.3.2a-22) ... Preparing to unpack .../27-libcomerr2_1.44.3-1_amd64.deb ... Unpacking libcomerr2:amd64 (1.44.3-1) over (1.44.2-1) ... Preparing to unpack .../28-libexo-common_0.12.2-1_all.deb ... Unpacking libexo-common (0.12.2-1) over (0.12.1-1) ... Preparing to unpack .../29-libexo-helpers_0.12.2-1_all.deb ... Unpacking libexo-helpers (0.12.2-1) over (0.12.1-1) ... Preparing to unpack .../30-libexo-2-0_0.12.2-1_amd64.deb ... Unpacking libexo-2-0:amd64 (0.12.2-1) over (0.12.1-1) ... Preparing to unpack .../31-libexo-1-0_0.12.2-1_amd64.deb ... Unpacking libexo-1-0:amd64 (0.12.2-1) over (0.12.1-1) ... Preparing to unpack .../32-libkpathsea6_2018.20180710.48169-1_amd64.deb ... Unpacking libkpathsea6:amd64 (2018.20180710.48169-1) over (2018.20180416.47457-5) ... Preparing to unpack .../33-ure_6.0.6~rc1-1_amd64.deb ... Unpacking ure (6.0.6~rc1-1) over (6.0.5-1) ... Preparing to unpack .../34-uno-libs3_6.0.6~rc1-1_amd64.deb ... Unpacking uno-libs3 (6.0.6~rc1-1) over (6.0.5-1) ... Preparing to unpack .../35-libreoffice-impress_1%3a6.0.6~rc1-1_amd64.deb ... Unpacking libreoffice-impress (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../36-libreoffice-draw_1%3a6.0.6~rc1-1_amd64.deb ... Unpacking libreoffice-draw (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../37-libreoffice-gtk2_1%3a6.0.6~rc1-1_amd64.deb ... Unpacking libreoffice-gtk2 (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../38-libreoffice-writer_1%3a6.0.6~rc1-1_amd64.deb ... Unpacking libreoffice-writer (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../39-libreoffice-systray_1%3a6.0.6~rc1-1_amd64.deb ... Unpacking libreoffice-systray (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../40-libreoffice-base-core_1%3a6.0.6~rc1-1_amd64.deb ... Unpacking libreoffice-base-core (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../41-libreoffice-math_1%3a6.0.6~rc1-1_amd64.deb ... Unpacking libreoffice-math (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../42-libreoffice-style-tango_1%3a6.0.6~rc1-1_all.deb ... Unpacking libreoffice-style-tango (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../43-libreoffice-style-galaxy_1%3a6.0.6~rc1-1_all.deb ... Unpacking libreoffice-style-galaxy (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../44-libreoffice-common_1%3a6.0.6~rc1-1_all.deb ... Unpacking libreoffice-common (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../45-libreoffice-calc_1%3a6.0.6~rc1-1_amd64.deb ... Unpacking libreoffice-calc (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../46-libreoffice-core_1%3a6.0.6~rc1-1_amd64.deb ... Unpacking libreoffice-core (1:6.0.6~rc1-1) over (1:6.0.5-1) ... Preparing to unpack .../47-libss2_1.44.3-1_amd64.deb ... Unpacking libss2:amd64 (1.44.3-1) over (1.44.2-1) ... Preparing to unpack .../48-libtalloc2_2.1.14-1_amd64.deb ... Unpacking libtalloc2:amd64 (2.1.14-1) over (2.1.11-2) ... Preparing to unpack .../49-python-lxml_4.2.3-1_amd64.deb ... Unpacking python-lxml:amd64 (4.2.3-1) over (4.2.1-1+b1) ... Preparing to unpack .../50-python-talloc_2.1.14-1_amd64.deb ... Unpacking python-talloc:amd64 (2.1.14-1) over (2.1.11-2) ... Preparing to unpack .../51-python3-lxml_4.2.3-1_amd64.deb ... Unpacking python3-lxml:amd64 (4.2.3-1) over (4.2.1-1+b1) ... Setting up libquadmath0:amd64 (8.1.0-10) ... Setting up libcom-err2:amd64 (1.44.3-1) ... Setting up libgomp1:amd64 (8.1.0-10) ... Setting up libkpathsea6:amd64 (2018.20180710.48169-1) ... Setting up libatomic1:amd64 (8.1.0-10) ... Processing triggers for ufw (0.35-6) ... Setting up libss2:amd64 (1.44.3-1) ... Setting up libcc1-0:amd64 (8.1.0-10) ... Setting up cups-server-common (2.2.8-5.0nosystemd1) ... Setting up e2fslibs:amd64 (1.44.3-1) ... Processing triggers for mime-support (3.61) ... Setting up python3-lxml:amd64 (4.2.3-1) ... Processing triggers for desktop-file-utils (0.23-3) ... Setting up libpng16-16:amd64 (1.6.34-2) ... Setting up cups-common (2.2.8-5.0nosystemd1) ... Setting up libtsan0:amd64 (8.1.0-10) ... Processing triggers for gnome-icon-theme (3.12.0-3) ... Setting up e2fsprogs (1.44.3-1) ... update-initramfs: deferring update (trigger activated) Setting up liblsan0:amd64 (8.1.0-10) ... Setting up gcc-7-base:amd64 (7.3.0-25) ... Setting up binutils-common:amd64 (2.30.90.20180710-1) ... Setting up libexo-common (0.12.2-1) ... Setting up asunder (2.9.3-2) ... Setting up libmpx2:amd64 (8.1.0-10) ... Setting up bubblewrap (0.3.0-1) ... Processing triggers for libc-bin (2.27-3) ... Setting up feh (2.27-1) ... Setting up html2text (1.3.2a-23) ... Processing triggers for systemd (239-5) ... Setting up python-lxml:amd64 (4.2.3-1) ... Processing triggers for man-db (2.8.3-2) ... Processing triggers for shared-mime-info (1.9-2) ... Setting up libtalloc2:amd64 (2.1.14-1) ... Setting up libcomerr2:amd64 (1.44.3-1) ... Processing triggers for dbus (1.12.8-3.0+nosystemd1) ... Setting up fonts-opensymbol (2:102.10+LibO6.0.6~rc1-1) ... Setting up uno-libs3 (6.0.6~rc1-1) ... Setting up openssh-client (1:7.7p1-3.0nosystemd1) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Setting up libexo-helpers (0.12.2-1) ... Setting up ure (6.0.6~rc1-1) ... Setting up libexo-2-0:amd64 (0.12.2-1) ... Setting up libitm1:amd64 (8.1.0-10) ... Processing triggers for rsyslog (8.36.0-1.0nosystemd1) ... Setting up libpolkit-gobject-1-0:amd64 (0.105-21.0nosystemd1) ... Processing triggers for fontconfig (2.13.0-5) ... Setting up libcups2:amd64 (2.2.8-5.0nosystemd1) ... Setting up python-talloc:amd64 (2.1.14-1) ... Setting up libasan4:amd64 (7.3.0-25) ... Setting up libgfortran4:amd64 (7.3.0-25) ... Setting up libbinutils:amd64 (2.30.90.20180710-1) ... Setting up libcilkrts5:amd64 (7.3.0-25) ... Setting up libpolkit-agent-1-0:amd64 (0.105-21.0nosystemd1) ... Setting up libexo-1-0:amd64 (0.12.2-1) ... Setting up cups-ipp-utils (2.2.8-5.0nosystemd1) ... Setting up gir1.2-polkit-1.0 (0.105-21.0nosystemd1) ... Setting up libubsan0:amd64 (7.3.0-25) ... Setting up libcupsmime1:amd64 (2.2.8-5.0nosystemd1) ... Setting up cups-daemon (2.2.8-5.0nosystemd1) ... Installing new version of config file /etc/apparmor.d/usr.sbin.cupsd ... Setting up cups-core-drivers (2.2.8-5.0nosystemd1) ... Setting up libgcc-7-dev:amd64 (7.3.0-25) ... Setting up cpp-7 (7.3.0-25) ... Setting up libcupsppdc1:amd64 (2.2.8-5.0nosystemd1) ... Setting up libcupsimage2:amd64 (2.2.8-5.0nosystemd1) ... Setting up libpolkit-backend-1-0:amd64 (0.105-21.0nosystemd1) ... Setting up openssh-sftp-server (1:7.7p1-3.0nosystemd1) ... Setting up cups-client (2.2.8-5.0nosystemd1) ... Setting up libcupscgi1:amd64 (2.2.8-5.0nosystemd1) ... Setting up binutils-x86-64-linux-gnu (2.30.90.20180710-1) ... Setting up policykit-1 (0.105-21.0nosystemd1) ... Removed /run/systemd/system/polkit.service. Failed to get unit file state for polkit.service: No such file or directory polkit.service is a disabled or a static unit not running, not starting it. Setting up cups-ppdc (2.2.8-5.0nosystemd1) ... Setting up cups (2.2.8-5.0nosystemd1) ... Updating PPD files for cups ... Setting up openssh-server (1:7.7p1-3.0nosystemd1) ... Job for ssh.service failed because a timeout was exceeded. See "systemctl status ssh.service" and "journalctl -xe" for details. invoke-rc.d: initscript ssh, action "restart" failed. â ssh.service - OpenBSD Secure Shell server Loaded: loaded (]8;;file://antix1/lib/systemd/system/ssh.service/lib/systemd/system/ssh.service]8;;; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: timeout) since Tue 2018-07-17 14:57:43 EDT; 17ms ago Docs: ]8;;man:sshd(8)man:sshd(8)]8;; ]8;;man:sshd_config(5)man:sshd_config(5)]8;; Process: 7806 ExecStart=/usr/sbin/sshd -D $SSHD_OPTS (code=exited, status=0/SUCCESS) Process: 7803 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=0/SUCCESS) Main PID: 7806 (code=exited, status=0/SUCCESS) dpkg: error processing package openssh-server (--configure): installed openssh-server package post-installation script subprocess returned error exit status 1 Setting up binutils (2.30.90.20180710-1) ... Setting up gcc-7 (7.3.0-25) ... Setting up libreoffice-style-galaxy (1:6.0.6~rc1-1) ... Setting up libreoffice-style-tango (1:6.0.6~rc1-1) ... Setting up libreoffice-common (1:6.0.6~rc1-1) ... Setting up libreoffice-core (1:6.0.6~rc1-1) ... Setting up libreoffice-gtk2 (1:6.0.6~rc1-1) ... Setting up libreoffice-systray (1:6.0.6~rc1-1) ... Setting up libreoffice-draw (1:6.0.6~rc1-1) ... Setting up libreoffice-impress (1:6.0.6~rc1-1) ... Setting up libreoffice-math (1:6.0.6~rc1-1) ... Setting up libreoffice-base-core (1:6.0.6~rc1-1) ... Setting up libreoffice-calc (1:6.0.6~rc1-1) ... Setting up libreoffice-writer (1:6.0.6~rc1-1) ... Processing triggers for initramfs-tools (0.130) ... update-initramfs: Generating /boot/initrd.img-4.4.10-antix.1-amd64-smp cryptsetup: WARNING: The initramfs image may not contain cryptsetup binaries nor crypto modules. If that's on purpose, you may want to uninstall the 'cryptsetup-initramfs' package in order to disable the cryptsetup initramfs integration and avoid this warning. I: The initramfs will attempt to resume from /dev/sda2 I: (UUID=f34a5d1e-9670-4b11-9602-8eb1338a376d) I: Set the RESUME variable to override this. Processing triggers for libc-bin (2.27-3) ... Errors were encountered while processing: openssh-server Log ended: 2018-07-17 14:58:03 Log started: 2018-07-19 12:00:15 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135350 files and directories currently installed.) Preparing to unpack .../libgpg-error0_1.32-1_amd64.deb ... Unpacking libgpg-error0:amd64 (1.32-1) over (1.31-1) ... Setting up libgpg-error0:amd64 (1.32-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 135350 files and directories currently installed.) Preparing to unpack .../00-busybox_1%3a1.27.2-3_amd64.deb ... Unpacking busybox (1:1.27.2-3) over (1:1.27.2-2) ... Preparing to unpack .../01-libcupsfilters1_1.20.4-1_amd64.deb ... Unpacking libcupsfilters1:amd64 (1.20.4-1) over (1.20.3-1+b1) ... Preparing to unpack .../02-cups-filters-core-drivers_1.20.4-1_amd64.deb ... Unpacking cups-filters-core-drivers (1.20.4-1) over (1.20.3-1+b1) ... Preparing to unpack .../03-libfontembed1_1.20.4-1_amd64.deb ... Unpacking libfontembed1:amd64 (1.20.4-1) over (1.20.3-1+b1) ... Preparing to unpack .../04-cups-filters_1.20.4-1_amd64.deb ... Unpacking cups-filters (1.20.4-1) over (1.20.3-1+b1) ... Preparing to unpack .../05-libboost-system1.62.0_1.62.0+dfsg-8_amd64.deb ... Unpacking libboost-system1.62.0:amd64 (1.62.0+dfsg-8) over (1.62.0+dfsg-6) ... Preparing to unpack .../06-libboost-chrono1.62.0_1.62.0+dfsg-8_amd64.deb ... Unpacking libboost-chrono1.62.0:amd64 (1.62.0+dfsg-8) over (1.62.0+dfsg-6) ... Preparing to unpack .../07-libboost-date-time1.62.0_1.62.0+dfsg-8_amd64.deb ... Unpacking libboost-date-time1.62.0:amd64 (1.62.0+dfsg-8) over (1.62.0+dfsg-6) ... Preparing to unpack .../08-libboost-filesystem1.62.0_1.62.0+dfsg-8_amd64.deb ... Unpacking libboost-filesystem1.62.0:amd64 (1.62.0+dfsg-8) over (1.62.0+dfsg-6) ... Preparing to unpack .../09-libboost-iostreams1.62.0_1.62.0+dfsg-8_amd64.deb ... Unpacking libboost-iostreams1.62.0:amd64 (1.62.0+dfsg-8) over (1.62.0+dfsg-6) ... Preparing to unpack .../10-libboost-thread1.62.0_1.62.0+dfsg-8_amd64.deb ... Unpacking libboost-thread1.62.0:amd64 (1.62.0+dfsg-8) over (1.62.0+dfsg-6) ... Preparing to unpack .../11-libboost-locale1.62.0_1.62.0+dfsg-8_amd64.deb ... Unpacking libboost-locale1.62.0:amd64 (1.62.0+dfsg-8) over (1.62.0+dfsg-6) ... Preparing to unpack .../12-libboost-program-options1.62.0_1.62.0+dfsg-8_amd64.deb ... Unpacking libboost-program-options1.62.0:amd64 (1.62.0+dfsg-8) over (1.62.0+dfsg-6) ... Preparing to unpack .../13-libboost-python1.62.0_1.62.0+dfsg-8_amd64.deb ... Unpacking libboost-python1.62.0 (1.62.0+dfsg-8) over (1.62.0+dfsg-6) ... Preparing to unpack .../14-libinput-bin_1.11.2-1_amd64.deb ... Unpacking libinput-bin (1.11.2-1) over (1.11.1-1) ... Preparing to unpack .../15-libinput10_1.11.2-1_amd64.deb ... Unpacking libinput10:amd64 (1.11.2-1) over (1.11.1-1) ... Preparing to unpack .../16-libwww-perl_6.35-1_all.deb ... Unpacking libwww-perl (6.35-1) over (6.34-1) ... Preparing to unpack .../17-make_4.2.1-1.1_amd64.deb ... Unpacking make (4.2.1-1.1) over (4.1-9.1) ... Setting up make (4.2.1-1.1) ... Setting up libboost-date-time1.62.0:amd64 (1.62.0+dfsg-8) ... Setting up busybox (1:1.27.2-3) ... Setting up libboost-program-options1.62.0:amd64 (1.62.0+dfsg-8) ... Processing triggers for initramfs-tools (0.130) ... update-initramfs: Generating /boot/initrd.img-4.4.10-antix.1-amd64-smp cryptsetup: WARNING: The initramfs image may not contain cryptsetup binaries nor crypto modules. If that's on purpose, you may want to uninstall the 'cryptsetup-initramfs' package in order to disable the cryptsetup initramfs integration and avoid this warning. I: The initramfs will attempt to resume from /dev/sda2 I: (UUID=f34a5d1e-9670-4b11-9602-8eb1338a376d) I: Set the RESUME variable to override this. Setting up libinput-bin (1.11.2-1) ... Setting up libboost-iostreams1.62.0:amd64 (1.62.0+dfsg-8) ... Setting up libcupsfilters1:amd64 (1.20.4-1) ... Setting up libfontembed1:amd64 (1.20.4-1) ... Setting up openssh-server (1:7.7p1-3.0nosystemd1) ... Job for ssh.service failed because a timeout was exceeded. See "systemctl status ssh.service" and "journalctl -xe" for details. invoke-rc.d: initscript ssh, action "restart" failed. â ssh.service - OpenBSD Secure Shell server Loaded: loaded (]8;;file://antix1/lib/systemd/system/ssh.service/lib/systemd/system/ssh.service]8;;; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: timeout) since Thu 2018-07-19 12:02:28 EDT; 16ms ago Docs: ]8;;man:sshd(8)man:sshd(8)]8;; ]8;;man:sshd_config(5)man:sshd_config(5)]8;; Process: 6933 ExecStart=/usr/sbin/sshd -D $SSHD_OPTS (code=exited, status=0/SUCCESS) Process: 6930 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=0/SUCCESS) Main PID: 6933 (code=exited, status=0/SUCCESS) dpkg: error processing package openssh-server (--configure): installed openssh-server package post-installation script subprocess returned error exit status 1 Processing triggers for libc-bin (2.27-3) ... Processing triggers for udev (239-5) ... Setting up cups-filters-core-drivers (1.20.4-1) ... Processing triggers for man-db (2.8.3-2) ... Setting up libboost-python1.62.0 (1.62.0+dfsg-8) ... Setting up libboost-system1.62.0:amd64 (1.62.0+dfsg-8) ... Setting up libwww-perl (6.35-1) ... Setting up cups-filters (1.20.4-1) ... Setting up libboost-thread1.62.0:amd64 (1.62.0+dfsg-8) ... Setting up libinput10:amd64 (1.11.2-1) ... Processing triggers for cups (2.2.8-5.0nosystemd1) ... Updating PPD files for cups-filters ... Setting up libboost-filesystem1.62.0:amd64 (1.62.0+dfsg-8) ... Setting up libboost-chrono1.62.0:amd64 (1.62.0+dfsg-8) ... Setting up libboost-locale1.62.0:amd64 (1.62.0+dfsg-8) ... Processing triggers for libc-bin (2.27-3) ... Errors were encountered while processing: openssh-server Log ended: 2018-07-19 12:02:39history.log Start-Date: 2018-07-03 13:56:19 Commandline: apt-get dist-upgrade Install: cryptsetup-initramfs:amd64 (2:2.0.3-4, automatic), libcppunit-1.14-0:amd64 (1.14.0-3, automatic), libtorrent20:amd64 (0.13.7-1, automatic), cryptsetup-run:amd64 (2:2.0.3-4, automatic) Upgrade: cryptsetup-bin:amd64 (2:2.0.2-1, 2:2.0.3-4), libgcc-7-dev:amd64 (7.3.0-23, 7.3.0-24), libmpx2:amd64 (8.1.0-8, 8.1.0-9), libsoup-gnome2.4-1:amd64 (2.62.1-1, 2.62.2-2), libpython3.6-minimal:amd64 (3.6.6~rc1-4, 3.6.6-1), libpangoft2-1.0-0:amd64 (1.42.0-1, 1.42.1-2), libvte-2.91-0:amd64 (0.52.0-1, 0.52.2-1), libsemanage1:amd64 (2.8-1, 2.8-1+b1), gir1.2-gtk-3.0:amd64 (3.22.29-3, 3.22.30-2), linux-libc-dev:amd64 (4.16.12-1, 4.16.16-2), libxml2-utils:amd64 (2.9.4+dfsg1-7, 2.9.4+dfsg1-7+b1), gir1.2-soup-2.4:amd64 (2.62.1-1, 2.62.2-2), libdw1:amd64 (0.170-0.4, 0.170-0.5), libgtk-3-common:amd64 (3.22.29-3, 3.22.30-2), libgtk-3-0:amd64 (3.22.29-3, 3.22.30-2), libpango1.0-0:amd64 (1.42.0-1, 1.42.1-2), cpp-7:amd64 (7.3.0-23, 7.3.0-24), python-gi:amd64 (3.28.2-1, 3.28.2-1+b1), gcc-8-base:amd64 (8.1.0-8, 8.1.0-9), libpython3.6-stdlib:amd64 (3.6.6~rc1-4, 3.6.6-1), libelf1:amd64 (0.170-0.4, 0.170-0.5), python-dbus:amd64 (1.2.8-2, 1.2.8-2+b1), python3-reportlab-accel:amd64 (3.4.0-3+b1, 3.4.0-3+b2), libitm1:amd64 (8.1.0-8, 8.1.0-9), libgtk2.0-0:amd64 (2.24.32-1, 2.24.32-2), gcc-7-base:amd64 (7.3.0-23, 7.3.0-24), python3.6:amd64 (3.6.6~rc1-4, 3.6.6-1), python-cairo:amd64 (1.16.2-1, 1.16.2-1+b1), gir1.2-pango-1.0:amd64 (1.42.0-1, 1.42.1-2), libharfbuzz-icu0:amd64 (1.7.6-1+b1, 1.8.1-1), libcilkrts5:amd64 (7.3.0-23, 7.3.0-24), libasan4:amd64 (7.3.0-23, 7.3.0-24), libquadmath0:amd64 (8.1.0-8, 8.1.0-9), python-urwid:amd64 (2.0.1-2, 2.0.1-2+b1), python-lxml:amd64 (4.2.1-1, 4.2.1-1+b1), rsyslog:amd64 (8.35.0-1.0nosystemd1, 8.36.0-1.0nosystemd1), libapparmor1:amd64 (2.12-4, 2.12-4+b1), libsoup2.4-1:amd64 (2.62.1-1, 2.62.2-2), python3-cups:amd64 (1.9.73-2, 1.9.73-2+b1), libxmlsec1-nss:amd64 (1.2.25-2, 1.2.26-3), libgcc1:amd64 (1:8.1.0-8, 1:8.1.0-9), python3.6-minimal:amd64 (3.6.6~rc1-4, 3.6.6-1), libpangoxft-1.0-0:amd64 (1.42.0-1, 1.42.1-2), libvte9:amd64 (1:0.28.2-5+b2, 1:0.28.2-5+b3), libllvm6.0:amd64 (1:6.0-3+b1, 1:6.0.1-2), libtsan0:amd64 (8.1.0-8, 8.1.0-9), libgtk-3-bin:amd64 (3.22.29-3, 3.22.30-2), libubsan0:amd64 (7.3.0-23, 7.3.0-24), libpangocairo-1.0-0:amd64 (1.42.0-1, 1.42.1-2), gtk2-engines-pixbuf:amd64 (2.24.32-1, 2.24.32-2), whiptail:amd64 (0.52.20-4, 0.52.20-5), libnewt0.52:amd64 (0.52.20-4, 0.52.20-5), libgfortran4:amd64 (7.3.0-23, 7.3.0-24), gcc-7:amd64 (7.3.0-23, 7.3.0-24), libselinux1:amd64 (2.8-1, 2.8-1+b1), liblsan0:amd64 (8.1.0-8, 8.1.0-9), libgomp1:amd64 (8.1.0-8, 8.1.0-9), libgtk2.0-common:amd64 (2.24.32-1, 2.24.32-2), python3-dbus:amd64 (1.2.8-2, 1.2.8-2+b1), python3-cairo:amd64 (1.16.2-1, 1.16.2-1+b1), libxml2:amd64 (2.9.4+dfsg1-7, 2.9.4+dfsg1-7+b1), python3-gi:amd64 (3.28.2-1, 3.28.2-1+b1), libvte-2.91-common:amd64 (0.52.0-1, 0.52.2-1), python3-ptyprocess:amd64 (0.5.2-1, 0.6.0-1), libnss3:amd64 (2:3.37.1-1, 2:3.38-1), rtorrent:amd64 (0.9.6-3+b2, 0.9.7-1), libcryptsetup12:amd64 (2:2.0.2-1, 2:2.0.3-4), gtk-update-icon-cache:amd64 (3.22.29-3, 3.22.30-2), libatomic1:amd64 (8.1.0-8, 8.1.0-9), libharfbuzz0b:amd64 (1.7.6-1+b1, 1.8.1-1), libcc1-0:amd64 (8.1.0-8, 8.1.0-9), python3-lxml:amd64 (4.2.1-1, 4.2.1-1+b1), libstdc++6:amd64 (8.1.0-8, 8.1.0-9), libpango-1.0-0:amd64 (1.42.0-1, 1.42.1-2), cryptsetup:amd64 (2:2.0.2-1, 2:2.0.3-4), libxmlsec1:amd64 (1.2.25-2, 1.2.26-3), libaudit1:amd64 (1:2.8.3-1, 1:2.8.3-1+b1), firefox-esr:amd64 (52.8.1esr-2, 52.9.0esr-1), libfribidi0:amd64 (0.19.7-2, 0.19.7-3), libkpathsea6:amd64 (2018.20180416.47457-4, 2018.20180416.47457-5) End-Date: 2018-07-03 13:58:53 Start-Date: 2018-07-04 10:56:52 Commandline: apt-get dist-upgrade Install: libindicator3-7:amd64 (0.5.0-3+b1, automatic), libappindicator3-1:amd64 (0.4.92-5, automatic), libdbusmenu-gtk3-4:amd64 (16.04.1+17.04.20170109.1-5, automatic) Upgrade: python3-pexpect:amd64 (4.2.1-1, 4.6.0-1), libseccomp2:amd64 (2.3.3-2, 2.3.3-3), libbrotli1:amd64 (1.0.4-1, 1.0.5-1), libgslcblas0:amd64 (2.4+dfsg-6, 2.5+dfsg-4), clipit:amd64 (1.4.2-1.2, 1.4.4-1), libgsl23:amd64 (2.4+dfsg-6, 2.5+dfsg-4), libtiff5:amd64 (4.0.9-5, 4.0.9-6), libexiv2-14:amd64 (0.25-3.1, 0.25-4) End-Date: 2018-07-04 10:57:20 Start-Date: 2018-07-05 10:10:36 Commandline: apt-get dist-upgrade Upgrade: libcups2:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), cups-server-common:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), cups-common:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), cups-ppdc:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), libcupsmime1:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), smtube:amd64 (18.3.0-1~mx17+1, 18.3.0-1), libcupsppdc1:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), cups-core-drivers:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), cups-daemon:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), libcupsimage2:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), cups:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), libcupscgi1:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), cups-client:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4), cups-ipp-utils:amd64 (2.2.8-3.0nosystemd1, 2.2.8-4) End-Date: 2018-07-05 10:11:18 Start-Date: 2018-07-05 10:11:40 Commandline: apt autoremove Remove: libtorrent19:amd64 (0.13.6-2) End-Date: 2018-07-05 10:11:42 Start-Date: 2018-07-11 09:39:57 Commandline: apt-get dist-upgrade Upgrade: libgphoto2-port12:amd64 (2.5.18-1, 2.5.18-2), glib-networking-services:amd64 (2.56.0-1, 2.56.1-1), libplist3:amd64 (2.0.0-3, 2.0.0-4), libcups2:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), libxapian30:amd64 (1.4.5-1, 1.4.6-2), libgphoto2-6:amd64 (2.5.18-1, 2.5.18-2), libnorm1:amd64 (1.5r6+dfsg1-9, 1.5.7+dfsg1-1), libegl-mesa0:amd64 (18.1.2-1, 18.1.3-1), libhd21:amd64 (21.55-1, 21.56-1), libsystemd0:amd64 (238-5, 239-5), glib-networking:amd64 (2.56.0-1, 2.56.1-1), libglapi-mesa:amd64 (18.1.2-1, 18.1.3-1), libxatracker2:amd64 (18.1.2-1, 18.1.3-1), libharfbuzz-icu0:amd64 (1.8.1-1, 1.8.2-2), udev:amd64 (238-5, 239-5), libegl1-mesa:amd64 (18.1.2-1, 18.1.3-1), cups-server-common:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), dict:amd64 (1.12.1+dfsg-6, 1.12.1+dfsg-7), upower:amd64 (0.99.8-1, 0.99.8-2), cups-common:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), glib-networking-common:amd64 (2.56.0-1, 2.56.1-1), libudev1:amd64 (238-5, 239-5), hwinfo:amd64 (21.55-1, 21.56-1), libapparmor1:amd64 (2.12-4+b1, 2.12-5), libgbm1:amd64 (18.1.2-1, 18.1.3-1), libboost-iostreams1.62.0:amd64 (1.62.0+dfsg-5.1, 1.62.0+dfsg-6), libboost-chrono1.62.0:amd64 (1.62.0+dfsg-5.1, 1.62.0+dfsg-6), cups-ppdc:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), libcupsmime1:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), sed:amd64 (4.4-2, 4.5-1), libnss-myhostname:amd64 (238-5, 239-5), libwayland-egl1-mesa:amd64 (18.1.2-1, 18.1.3-1), libboost-program-options1.62.0:amd64 (1.62.0+dfsg-5.1, 1.62.0+dfsg-6), libboost-locale1.62.0:amd64 (1.62.0+dfsg-5.1, 1.62.0+dfsg-6), iproute2:amd64 (4.16.0-4, 4.17.0-2), libgl1-mesa-dri:amd64 (18.1.2-1, 18.1.3-1), libupower-glib3:amd64 (0.99.8-1, 0.99.8-2), libboost-filesystem1.62.0:amd64 (1.62.0+dfsg-5.1, 1.62.0+dfsg-6), bash:amd64 (4.4.18-3, 4.4.18-3.1), dictionaries-common:amd64 (1.27.6, 1.27.7), libgl1-mesa-glx:amd64 (18.1.2-1, 18.1.3-1), libcupsppdc1:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), libboost-date-time1.62.0:amd64 (1.62.0+dfsg-5.1, 1.62.0+dfsg-6), cups-core-drivers:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), libboost-thread1.62.0:amd64 (1.62.0+dfsg-5.1, 1.62.0+dfsg-6), cups-daemon:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), libharfbuzz0b:amd64 (1.8.1-1, 1.8.2-2), libcupsimage2:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), libboost-system1.62.0:amd64 (1.62.0+dfsg-5.1, 1.62.0+dfsg-6), libboost-python1.62.0:amd64 (1.62.0+dfsg-5.1, 1.62.0+dfsg-6), cups:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), libcupscgi1:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), cups-client:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), cups-ipp-utils:amd64 (2.2.8-4, 2.2.8-4.0nosystemd1), sshfs:amd64 (2.10-1, 2.10+repack-2), xserver-xorg-input-mouse:amd64 (1:1.9.2-1+b1, 1:1.9.3-1), python-numpy:amd64 (1:1.14.4-1, 1:1.14.5-1+b1), libglx-mesa0:amd64 (18.1.2-1, 18.1.3-1) End-Date: 2018-07-11 09:42:01 Start-Date: 2018-07-12 13:06:35 Commandline: apt-get dist-upgrade Upgrade: libapt-inst2.0:amd64 (1.6.2, 1.6.3), apt:amd64 (1.6.2, 1.6.3), libappindicator3-1:amd64 (0.4.92-5, 0.4.92-6), libapt-pkg5.0:amd64 (1.6.2, 1.6.3), clipit:amd64 (1.4.4-1, 1.4.4-2), libappindicator1:amd64 (0.4.92-5, 0.4.92-6), apt-utils:amd64 (1.6.2, 1.6.3) Remove: cherrytree:amd64 (0.37.6-1), python-appindicator:amd64 (0.4.92-5) End-Date: 2018-07-12 13:07:47 Start-Date: 2018-07-12 13:08:26 Commandline: apt autoremove Remove: python-enchant:amd64 (2.0.0-1), libindicator7:amd64 (0.5.0-3+b1), libgtksourceview2.0-0:amd64 (2.10.5-3), python-chardet:amd64 (3.0.4-1), libdbusmenu-gtk4:amd64 (16.04.1+17.04.20170109.1-5), libgtksourceview2.0-common:amd64 (2.10.5-3), libappindicator1:amd64 (0.4.92-6), python-gtksourceview2:amd64 (2.10.1-3) End-Date: 2018-07-12 13:08:33 Start-Date: 2018-07-13 11:07:41 Commandline: apt-get dist-upgrade Install: systemd-sysv:amd64 (239-5, automatic), libpam-systemd:amd64 (239-5, automatic), systemd:amd64 (239-5, automatic) Upgrade: libpolkit-gobject-1-0:amd64 (0.105-20.0nosystemd1, 0.105-21), libavformat57:amd64 (7:3.4.2-2+b2, 7:3.4.3-1), libavfilter6:amd64 (7:3.4.2-2+b2, 7:3.4.3-1), ffmpeg:amd64 (7:3.4.2-2+b2, 7:3.4.3-1), libswresample2:amd64 (7:3.4.2-2+b2, 7:3.4.3-1), openssh-sftp-server:amd64 (1:7.7p1-2.0nosystemd1, 1:7.7p1-3), libpolkit-agent-1-0:amd64 (0.105-20.0nosystemd1, 0.105-21), libpostproc54:amd64 (7:3.4.2-2+b2, 7:3.4.3-1), libavcodec-extra:amd64 (7:3.4.2-2, 7:3.4.3-1), mupdf:amd64 (1.13.0+ds1-1, 1.13.0+ds1-2), libavutil55:amd64 (7:3.4.2-2+b2, 7:3.4.3-1), libavdevice57:amd64 (7:3.4.2-2+b2, 7:3.4.3-1), libpolkit-backend-1-0:amd64 (0.105-20.0nosystemd1, 0.105-21), openssh-server:amd64 (1:7.7p1-2.0nosystemd1, 1:7.7p1-3), libswscale4:amd64 (7:3.4.2-2+b2, 7:3.4.3-1), openssh-client:amd64 (1:7.7p1-2.0nosystemd1, 1:7.7p1-3), policykit-1:amd64 (0.105-20.0nosystemd1, 0.105-21), libavcodec-extra57:amd64 (7:3.4.2-2+b2, 7:3.4.3-1), gir1.2-polkit-1.0:amd64 (0.105-20.0nosystemd1, 0.105-21), libavresample3:amd64 (7:3.4.2-2+b2, 7:3.4.3-1) Remove: sysvinit-core:amd64 (2.88dsf-59.10) End-Date: 2018-07-13 11:08:47 Start-Date: 2018-07-17 14:53:15 Commandline: apt-get dist-upgrade Upgrade: libgcc-7-dev:amd64 (7.3.0-24, 7.3.0-25), asunder:amd64 (2.9.3-1, 2.9.3-2), libpolkit-gobject-1-0:amd64 (0.105-21, 0.105-21.0nosystemd1), libreoffice-math:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), libmpx2:amd64 (8.1.0-9, 8.1.0-10), libcomerr2:amd64 (1.44.2-1, 1.44.3-1), libcom-err2:amd64 (1.44.2-1, 1.44.3-1), libcups2:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), libreoffice-gtk2:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), libreoffice-core:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), cpp-7:amd64 (7.3.0-24, 7.3.0-25), gcc-8-base:amd64 (8.1.0-9, 8.1.0-10), libreoffice-systray:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), binutils:amd64 (2.30-22, 2.30.90.20180710-1), e2fsprogs:amd64 (1.44.2-1, 1.44.3-1), libitm1:amd64 (8.1.0-9, 8.1.0-10), feh:amd64 (2.26.3-1+b1, 2.27-1), gcc-7-base:amd64 (7.3.0-24, 7.3.0-25), openssh-sftp-server:amd64 (1:7.7p1-3, 1:7.7p1-3.0nosystemd1), libexo-1-0:amd64 (0.12.1-1, 0.12.2-1), libpolkit-agent-1-0:amd64 (0.105-21, 0.105-21.0nosystemd1), libcilkrts5:amd64 (7.3.0-24, 7.3.0-25), libexo-2-0:amd64 (0.12.1-1, 0.12.2-1), cups-server-common:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), libasan4:amd64 (7.3.0-24, 7.3.0-25), libquadmath0:amd64 (8.1.0-9, 8.1.0-10), e2fslibs:amd64 (1.44.2-1, 1.44.3-1), cups-common:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), bubblewrap:amd64 (0.2.1-1, 0.3.0-1), python-lxml:amd64 (4.2.1-1+b1, 4.2.3-1), libtalloc2:amd64 (2.1.11-2, 2.1.14-1), python-talloc:amd64 (2.1.11-2, 2.1.14-1), libgcc1:amd64 (1:8.1.0-9, 1:8.1.0-10), libss2:amd64 (1.44.2-1, 1.44.3-1), libreoffice-style-galaxy:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), libreoffice-base-core:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), binutils-x86-64-linux-gnu:amd64 (2.30-22, 2.30.90.20180710-1), libext2fs2:amd64 (1.44.2-1, 1.44.3-1), libreoffice-impress:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), libtsan0:amd64 (8.1.0-9, 8.1.0-10), libubsan0:amd64 (7.3.0-24, 7.3.0-25), cups-ppdc:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), libcupsmime1:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), libgfortran4:amd64 (7.3.0-24, 7.3.0-25), gcc-7:amd64 (7.3.0-24, 7.3.0-25), libexo-common:amd64 (0.12.1-1, 0.12.2-1), ure:amd64 (6.0.5-1, 6.0.6~rc1-1), libreoffice-writer:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), libreoffice-common:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), liblsan0:amd64 (8.1.0-9, 8.1.0-10), libgomp1:amd64 (8.1.0-9, 8.1.0-10), html2text:amd64 (1.3.2a-22, 1.3.2a-23), libpolkit-backend-1-0:amd64 (0.105-21, 0.105-21.0nosystemd1), openssh-server:amd64 (1:7.7p1-3, 1:7.7p1-3.0nosystemd1), openssh-client:amd64 (1:7.7p1-3, 1:7.7p1-3.0nosystemd1), binutils-common:amd64 (2.30-22, 2.30.90.20180710-1), policykit-1:amd64 (0.105-21, 0.105-21.0nosystemd1), fonts-opensymbol:amd64 (2:102.10+LibO6.0.5-1, 2:102.10+LibO6.0.6~rc1-1), libcupsppdc1:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), libbinutils:amd64 (2.30-22, 2.30.90.20180710-1), libunistring2:amd64 (0.9.8-1, 0.9.10-1), uno-libs3:amd64 (6.0.5-1, 6.0.6~rc1-1), libreoffice-style-tango:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), cups-core-drivers:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), libatomic1:amd64 (8.1.0-9, 8.1.0-10), cups-daemon:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), gir1.2-polkit-1.0:amd64 (0.105-21, 0.105-21.0nosystemd1), libcc1-0:amd64 (8.1.0-9, 8.1.0-10), libcupsimage2:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), python3-lxml:amd64 (4.2.1-1+b1, 4.2.3-1), libreoffice-calc:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), libstdc++6:amd64 (8.1.0-9, 8.1.0-10), cups:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), libcupscgi1:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), cups-client:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), cups-ipp-utils:amd64 (2.2.8-4.0nosystemd1, 2.2.8-5.0nosystemd1), libreoffice-draw:amd64 (1:6.0.5-1, 1:6.0.6~rc1-1), libexo-helpers:amd64 (0.12.1-1, 0.12.2-1), libkpathsea6:amd64 (2018.20180416.47457-5, 2018.20180710.48169-1), libpng16-16:amd64 (1.6.34-1, 1.6.34-2) Error: Sub-process /usr/bin/dpkg returned an error code (1) End-Date: 2018-07-17 14:58:03 Start-Date: 2018-07-19 12:00:15 Commandline: apt-get upgrade Upgrade: libgpg-error0:amd64 (1.31-1, 1.32-1), libwww-perl:amd64 (6.34-1, 6.35-1), libboost-iostreams1.62.0:amd64 (1.62.0+dfsg-6, 1.62.0+dfsg-8), libboost-chrono1.62.0:amd64 (1.62.0+dfsg-6, 1.62.0+dfsg-8), libinput-bin:amd64 (1.11.1-1, 1.11.2-1), cups-filters:amd64 (1.20.3-1+b1, 1.20.4-1), libcupsfilters1:amd64 (1.20.3-1+b1, 1.20.4-1), make:amd64 (4.1-9.1, 4.2.1-1.1), libboost-program-options1.62.0:amd64 (1.62.0+dfsg-6, 1.62.0+dfsg-8), libboost-locale1.62.0:amd64 (1.62.0+dfsg-6, 1.62.0+dfsg-8), libfontembed1:amd64 (1.20.3-1+b1, 1.20.4-1), libboost-filesystem1.62.0:amd64 (1.62.0+dfsg-6, 1.62.0+dfsg-8), cups-filters-core-drivers:amd64 (1.20.3-1+b1, 1.20.4-1), busybox:amd64 (1:1.27.2-2, 1:1.27.2-3), libboost-date-time1.62.0:amd64 (1.62.0+dfsg-6, 1.62.0+dfsg-8), libboost-thread1.62.0:amd64 (1.62.0+dfsg-6, 1.62.0+dfsg-8), libboost-system1.62.0:amd64 (1.62.0+dfsg-6, 1.62.0+dfsg-8), libboost-python1.62.0:amd64 (1.62.0+dfsg-6, 1.62.0+dfsg-8), libinput10:amd64 (1.11.1-1, 1.11.2-1) Error: Sub-process /usr/bin/dpkg returned an error code (1) End-Date: 2018-07-19 12:02:39“The goal of antiX is to provide a light, but fully functional and flexible free operating system”
With those design goals in mind, software such as a word processor (or a desktop environment) run against the grain.
Neither is light, in comparison to a text editor (or a window manager). And, in functional terms, you can do pretty much anything with Vim (and related tools) that you can do with Libre Writer. Generally speaking, you can find a CLI way to do anything you can do in a GUI.
Legal disclaimer: Steep learning curves may apply.
Edit: Vim is a CLI text editor. There are GUI ones too (I like Pluma.) Word processors are usually thought of as GUI only products, and what I wrote above goes along with that idea. However, in exploring a bit of AntiX history this morning, I came across a reference to a CLI word processor that apparently used to ship with AntiX by default in the version 12 days. It’s called Wordgrinder, and I pulled it out of the repos just now to give it a try.
sined.yanual
J\’ai installĂ© Antix sur un EeePC. Il persiste en bas, Ă gauche une icĂŽne USB \”Retirer le pĂ©riphĂ©rique amovible\” Je clique : apparaĂźt le texte suivant \” A removable drive with a mounted parttion is not found .It is safe to unplug the drive\” ( je n\’ai rien de branchĂ© !) Je valide sans que rien ne change.Dans le centre de contrĂŽle, les essais ,pour faire disparaĂźtre cette icĂŽne sont infructueux . …. mais Ă l\’linsertion d\’une clĂ© USB , son montage est impossible.. Sur ma mount box je peux voir la \”storage devices list\” ou ne sont listĂ©s que mes partitions de sda. Est-ce que cette persistance ne pourrait pas ĂȘtre un dossier live qui n\’a pas Ă©tĂ© supprimĂ© Ă l\’install ? Comment m\’en dĂ©barrasser et pouvoir lire une clĂ© USB, Merci
Forum for users of antiX Linux. Mean and Lean and Proudly anti-fascist.
