-
Search Results
-
Topic: Hello antiX , from Past :)
user_x
Twice )
$ inxi -Fx -c24 System: Host: zz Kernel: 4.9.0-326-antix.1-486-smp arch: i686 bits: 32 compiler: gcc v: 10.2.1 Desktop: IceWM v: 3.1.0 Distro: antiX-22_386-base Grup Yorum 19 October 2022 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Desktop Mobo: ECS model: 945P/PL-A v: 1.X serial: <superuser required> BIOS: American Megatrends v: 080012 date: 08/04/2006 CPU: Info: single core model: Intel Pentium 4 bits: 32 type: MT arch: Netburst Smithfield rev: 3 cache: L1: 16 KiB L2: 2 MiB Speed (MHz): avg: 3192 min/max: N/A cores: 1: 3192 2: 3192 bogomips: 12768 Flags: ht lm pae sse sse2 sse3 Graphics: Device-1: NVIDIA GT218 [GeForce 210] vendor: Gigabyte driver: nvidia v: 340.108 arch: Tesla bus-ID: 01:00.0 Display: server: X.Org v: 1.20.11 driver: X: loaded: nvidia gpu: nvidia resolution: 1440x900~60Hz OpenGL: renderer: GeForce 210/PCIe/SSE2 v: 3.3.0 NVIDIA 340.108 direct render: Yes Audio: Device-1: Intel 82801G AC97 Audio vendor: Elite Systems driver: snd_intel8x0 v: kernel bus-ID: 00:1e.2 Device-2: NVIDIA High Definition Audio vendor: Gigabyte driver: snd_hda_intel v: kernel bus-ID: 01:00.1 Sound Server-1: ALSA v: k4.9.0-326-antix.1-486-smp running: yes Network: Device-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Elite Systems driver: 8139too v: 0.9.28 port: d800 bus-ID: 02:05.0 IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: 00:19:21:48:e5:7e IF-ID-1: ppp0 state: unknown speed: N/A duplex: N/A mac: N/A Drives: Local Storage: total: 707.97 GiB used: 11.23 GiB (1.6%) ID-1: /dev/sda vendor: Seagate model: ST3320613AS size: 298.09 GiB ID-2: /dev/sdb vendor: Samsung model: HD200HJ size: 186.31 GiB ID-3: /dev/sdc model: SATA SSD size: 223.57 GiB Partition: ID-1: / size: 38.16 GiB used: 3.72 GiB (9.7%) fs: ext4 dev: /dev/sdb1 Swap: Alert: No swap data was found. Sensors: System Temperatures: cpu: N/A mobo: N/A gpu: nvidia temp: 50 C Fan Speeds (RPM): N/A gpu: nvidia fan: 45% Info: Processes: 143 Uptime: 2h 10m Memory: 2.96 GiB used: 1.04 GiB (35.2%) Init: SysVinit runlevel: 5 Compilers: gcc: 10.2.1 Packages: 1245 Shell: Bash v: 5.1.4 inxi: 3.3.19Second of keys the same, but with 64-bit antiX ))
Flight is normal.
Problem with some sensors is wery known,
and exists while boot any Linux[ 0.184091] ACPI: Added _OSI(Module Device) [ 0.184093] ACPI: Added _OSI(Processor Device) [ 0.184094] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.184096] ACPI: Added _OSI(Processor Aggregator Device) [ 0.184361] ACPI: Executed 1 blocks of module-level executable AML code [ 0.200228] ACPI Error: Method parse/execution failed [\_PR.CPU1._PDC] (Node f3490150), AE_INVALID_TABLE_LENGTH (20160831/psparse-541) [ 0.200504] ACPI Error: Method parse/execution failed [\_PR.CPU2._PDC] (Node f34901e0), AE_INVALID_TABLE_LENGTH (20160831/psparse-541) [ 0.201831] ACPI: Interpreter enabled [ 0.201862] ACPI: (supports S0 S3 S4 S5) [ 0.201864] ACPI: Using IOAPIC for interrupt routingIn a msWindows just writes in eventLog about disabling some functionality.
Everything is good. ..basically.)
Any additional data is possible as it becomes available.Thanks for antiXes
mcpderez
When I try to boot any of the less than full isos, I get an error on a splash screen:
This is a 32-bit computer. You cannot use 64-bit software on it.This happens with:
antiX-22-net_386-net.iso antiX-22_386-base.iso antiX-22_386-core.isoThe antiX-22_386-full.iso boots and installs just fine.
Here is my system info. It’s a Sony Vaio P series netbook with the dreaded GMA500 “Poulsbo” chipset.
System: Kernel: 4.9.0-326-antix.1-486-smp arch: i686 bits: 32 compiler: gcc v: 10.2.1 Desktop: IceWM v: 3.1.0 Distro: antiX-22_386-full Grup Yorum 18 October 2022 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: Sony product: VGN-P530H v: J003JT17 serial: <superuser required> Mobo: Sony model: VAIO serial: <superuser required> BIOS: INSYDE v: R1250U3 date: 12/08/2008 Battery: ID-1: BAT0 charge: 16.0 Wh (95.2%) condition: 16.8/16.8 Wh (100.0%) volts: 8.3 min: 7.4 model: Sony Corporation status: charging CPU: Info: single core model: Intel Atom Z520 bits: 32 type: MT arch: Bonnell rev: 2 cache: L1: 56 KiB L2: 512 KiB Speed (MHz): avg: 1333 min/max: 800/1333 cores: 1: 1333 2: 1333 bogomips: 5333 Flags: ht nx pae sse sse2 sse3 ssse3 vmx Graphics: Device-1: Intel US15W/US15X SCH [Poulsbo] Graphics vendor: Sony driver: gma500 v: N/A arch: PowerVR SGX535 bus-ID: 00:02.0 Device-2: Ricoh type: USB driver: uvcvideo bus-ID: 1-8:3 Display: server: X.Org v: 1.20.11 driver: X: loaded: modesetting unloaded: fbdev,vesa dri: swrast gpu: gma500 resolution: 1600x768~60Hz OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 direct render: Yes Audio: Device-1: Intel US15W/US15X/US15L/UL11L SCH [Poulsbo] HD Audio vendor: Sony driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 Sound API: ALSA v: k4.9.0-326-antix.1-486-smp running: yes Network: Device-1: Marvell 88E8057 PCI-E Gigabit Ethernet vendor: Sony driver: sky2 v: 1.30 port: 4000 bus-ID: 01:00.0 IF: eth0 state: down mac: <filter> Device-2: Qualcomm Atheros AR928X Wireless Network Adapter vendor: Foxconn driver: ath9k v: kernel bus-ID: 02:00.0 IF: wlan0 state: up mac: <filter> Drives: Local Storage: total: 55.89 GiB used: 4.09 GiB (7.3%) ID-1: /dev/sda vendor: Toshiba model: MK6028GAL size: 55.89 GiB Partition: ID-1: / size: 54.58 GiB used: 4.09 GiB (7.5%) fs: ext4 dev: /dev/sda1 Swap: ID-1: swap-1 type: partition size: 128 MiB used: 0 KiB (0.0%) dev: /dev/sda2 Sensors: System Temperatures: cpu: 64.0 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 152 Uptime: 26m Memory: 1.96 GiB used: 504.3 MiB (25.2%) Init: SysVinit runlevel: 5 Compilers: gcc: 10.2.1 Packages: 1564 Shell: Bash v: 5.1.4 inxi: 3.3.22- This topic was modified 6 months, 1 week ago by mcpderez.
- This topic was modified 6 months, 1 week ago by mcpderez.
- This topic was modified 6 months, 1 week ago by mcpderez. Reason: corrected a few typos
In reply to: What are you “here” with today?
knut
Found an old HP convertible, complete with its pen and in perfect condition apart from its CMOS battery and main battery being dead.
People wanted to throw it away. Took it and installed AntiX on it instead:$ inxi -F System: Host: anticapitalist Kernel: 5.10.142-antix.2-amd64-smp arch: x86_64 bits: 64 Desktop: Fluxbox v: 1.3.7 Distro: antiX-22_x64-full Grup Yorum 18 October 2022 Machine: Type: Laptop System: Hewlett-Packard product: HP Compaq 2710p v: F.11 serial: <superuser required> Mobo: Hewlett-Packard model: 30C8 v: KBC Version 74.39 serial: <superuser required> BIOS: Hewlett-Packard v: 68MOU Ver. F.11 date: 03/27/2008 CPU: Info: dual core model: Intel Core2 Duo U7700 bits: 64 type: MCP cache: L2: 2 MiB Speed (MHz): avg: 1382 min/max: 800/1334 cores: 1: 1349 2: 1415 Graphics: Device-1: Intel Mobile GM965/GL960 Integrated Graphics driver: i915 v: kernel Device-2: Chicony HP Webcam type: USB driver: uvcvideo Display: server: X.Org v: 1.20.11 driver: X: loaded: intel gpu: i915 resolution: 1280x800~60Hz OpenGL: renderer: Mesa DRI Intel 965GM (CL) v: 2.1 Mesa 20.3.5 Audio: Device-1: Intel 82801H HD Audio driver: snd_hda_intel Sound Server-1: ALSA v: k5.10.142-antix.2-amd64-smp running: yes Network: Device-1: Intel 82566MM Gigabit Network driver: e1000e IF: eth0 state: down mac: 00:1f:29:bd:47:f0 Device-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network driver: iwl4965 IF: wlan0 state: up mac: 00:1f:3b:79:28:cd Drives: Local Storage: total: 111.79 GiB used: 4.52 GiB (4.0%) ID-1: /dev/sda vendor: Toshiba model: MK1214GAH size: 111.79 GiB Partition: ID-1: / size: 106.51 GiB used: 4.52 GiB (4.2%) fs: ext4 dev: /dev/sda1 Swap: ID-1: swap-1 type: partition size: 3 GiB used: 0 KiB (0.0%) dev: /dev/sda2 Sensors: System Temperatures: cpu: 41.0 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 137 Uptime: 4h 20m Memory: 1.93 GiB used: 865.7 MiB (43.8%) Shell: Bash inxi: 3.3.19Addition:
Of course everything is working as it should, even the pressure sensitive pen works with mypaint.- This reply was modified 6 months, 1 week ago by knut.
Attachments:
juustonaksu
Hello to the antiX-forum and thank you to the makers of this lightweight linux, which I think will bring this old tablet (linx7) being useful again.
Few problems, which I cant get my head around after a day of searching, installing and reinstalling:
– No sound.
– No bluetooth.
– No battery level indication.These all work with MX Linux straight out of the box with no setting up, so it shouldn’t be a big problem?
I did the “inxi -zv7” on both antiX and MX:
AntiX:
System:
Kernel: 5.10.142-antix.2-amd64-smp arch: x86_64 bits: 64 compiler: gcc
v: 10.2.1 Desktop: IceWM v: 3.1.0 dm: slimski v: 1.5.0
Distro: antiX-22_x64-full Grup Yorum 18 October 2022
base: Debian GNU/Linux 11 (bullseye)
Machine:
Type: Desktop Mobo: LINX model: LINX7 serial: <superuser required>
UEFI: American Megatrends v: 5.6.5 date: 10/18/2014
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 912.2 MiB used: 352 MiB (38.6%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: quad core model: Intel Atom Z3735G bits: 64 type: MCP
smt: <unsupported> arch: Silvermont rev: 8 cache: L1: 224 KiB L2: 2 MiB
Speed (MHz): avg: 655 high: 939 min/max: 500/1833 cores: 1: 500 2: 654
3: 529 4: 939 bogomips: 10666
Flags: 3dnowprefetch acpi aes aperfmperf apic arat arch_perfmon bts
clflush cmov constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts epb
ept erms est flexpriority fpu fxsr ht ibpb ibrs ida lahf_lm lm mca mce
md_clear mmx monitor movbe msr mtrr nonstop_tsc nopl nx pae pat pbe
pclmulqdq pdcm pebs pge pni popcnt pse pse36 pti rdrand rdtscp rep_good
sep smep ss sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow
tsc tsc_adjust tsc_deadline_timer tsc_known_freq tsc_reliable vme vmx
vnmi vpid xtopology xtpr
Graphics:
Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
driver: i915 v: kernel ports: active: DSI-1
empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:0f31
class-ID: 0300
Display: server: X.Org v: 1.20.11 driver: X: loaded: modesetting
unloaded: fbdev,vesa gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 800×1280 s-dpi: 96 s-size: 211x338mm (8.31×13.31″)
s-diag: 398mm (15.69″)
Monitor-1: DSI-1 res: 800×1280 hz: 60 size: N/A modes: 800×1280
OpenGL: renderer: Mesa DRI Intel HD Graphics (BYT) v: 4.2 Mesa 20.3.5
compat-v: 3.0 direct render: Yes
Audio:
Message: No device data found.
Sound Server-1: ALSA v: k5.10.142-antix.2-amd64-smp running: yes
Network:
Message: No PCI device data found.
IF-ID-1: wlan0 state: down mac: <filter>
WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 58.94 GiB used: 4.96 GiB (8.4%)
ID-1: /dev/mmcblk1 model: 00000 size: 29.81 GiB type: SSD
serial: <filter> scheme: MBR
ID-2: /dev/mmcblk2 vendor: SK Hynix model: HBG4e size: 29.12 GiB
type: SSD serial: <filter> rev: 0x7 scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / size: 26.89 GiB used: 4.96 GiB (18.5%) fs: ext4 dev: /dev/mmcblk2p2
label: rootantiX22 uuid: bbe2ee24-c9d2-44be-a39e-74223feef770
ID-2: /boot/efi size: 252 MiB used: 314 KiB (0.1%) fs: vfat
dev: /dev/mmcblk2p1 label: EFI System uuid: 6EA4-A31B
Swap:
ID-1: swap-1 type: partition size: 1.37 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/mmcblk2p3 label: swapantiX
uuid: 3c64a9d2-66e1-45e9-99e8-135edeea13ba
Unmounted:
ID-1: /dev/mmcblk1p1 size: 29.81 GiB fs: exfat label: LinxSD
uuid: 635B-DB9C
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-1:2 info: Action Star Enterprise USB2.0 Hub ports: 5 rev: 2.0
speed: 480 Mb/s power: 100mA chip-ID: 0835:8500 class-ID: 0900
Device-1: 1-1.1:3 info: Action Star Enterprise USB HID type: Keyboard
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 480 Mb/s
power: 20mA chip-ID: 0835:8501 class-ID: 0301
Hub-3: 1-1.5:4 info: Action Star Enterprise USB2.0 Hub ports: 5 rev: 2.0
speed: 480 Mb/s power: 100mA chip-ID: 0835:8500 class-ID: 0900
Device-1: 1-1.5.1:5 info: Action Star Enterprise USB HID type: Keyboard
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 480 Mb/s
power: 20mA chip-ID: 0835:8502 class-ID: 0301
Device-2: 1-1.5.2:6 info: SiGma Micro Keyboard type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s
power: 98mA chip-ID: 1c4f:0026 class-ID: 0300
Device-3: 1-1.5.5:7 info: Pixart Imaging Optical Mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s
power: 100mA chip-ID: 093a:2510 class-ID: 0301
Hub-4: 2-0:1 info: Super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 36.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 163 Uptime: 0m wakeups: 0 Init: SysVinit v: 2.96 runlevel: 5
default: 5 Compilers: gcc: 10.2.1 alt: 10 Packages: apt: 1584 Shell: Bash
v: 5.1.4 running-in: roxterm inxi: 3.3.19MX:
System:
Kernel: 5.10.0-18-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.16.1 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.2.1_x64 Wildflower September 18 2022
base: Debian GNU/Linux 11 (bullseye)
Machine:
Type: Desktop System: LINX product: LINX7 v: N/A serial: <filter>
Mobo: LINX model: LINX7 serial: <filter> UEFI: American Megatrends v: 5.6.5
date: 10/18/2014
Battery:
ID-1: axp288_fuel_gauge charge: 95% condition: N/A volts: 4.0 min: N/A
model: N/A type: Li-ion serial: N/A status: Discharging
Memory:
RAM: total: 910.9 MiB used: 763.2 MiB (83.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Quad Core model: Intel Atom Z3735G bits: 64 type: MCP arch: Silvermont
rev: 8 cache: L2: 1024 KiB bogomips: 10666
Speed: 500 MHz min/max: 500/1833 MHz Core speeds (MHz): 1: 500 2: 500 3: 713
4: 791
Flags: 3dnowprefetch acpi aes aperfmperf apic arat arch_perfmon bts clflush
cmov constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept erms est
flexpriority fpu fxsr ht ida lahf_lm lm mca mce mmx monitor movbe msr mtrr
nonstop_tsc nopl nx pae pat pbe pclmulqdq pdcm pebs pge pni popcnt pse pse36
pti rdrand rdtscp rep_good sep smep ss sse sse2 sse4_1 sse4_2 ssse3 syscall
tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq
tsc_reliable vme vmx vnmi vpid xtopology xtpr
Graphics:
Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:0f31 class-ID: 0300
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver:
loaded: modesetting unloaded: fbdev,vesa resolution: 800×1280~60Hz s-dpi: 96
OpenGL: renderer: Mesa DRI Intel HD Graphics (BYT) v: 4.2 Mesa 20.3.5
compat-v: 3.0 direct render: Yes
Audio:
Device-1: bytcr-rt5640 driver: bytcr-rt5640 message: bus/chip ids unavailable
Device-2: Intel HDMI/DP LPE Audio driver: HdmiLpeAudio
message: bus/chip ids unavailable
Sound Server-1: ALSA v: k5.10.0-18-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Use of uninitialized value $args in concatenation (.) or string at /usr/local/bin/inxi line 2493.
Use of uninitialized value in concatenation (.) or string at /usr/local/bin/inxi line 2493.
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 –:–:– –:–:– –:–:– 0curl: (6) Could not resolve host: whatismyip.akamai.com
Use of uninitialized value $args in concatenation (.) or string at /usr/local/bin/inxi line 2493.
Use of uninitialized value in concatenation (.) or string at /usr/local/bin/inxi line 2493.
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 –:–:– –:–:– –:–:– 0curl: (6) Could not resolve host: icanhazip.com
Use of uninitialized value $args in concatenation (.) or string at /usr/local/bin/inxi line 2493.
Use of uninitialized value in concatenation (.) or string at /usr/local/bin/inxi line 2493.
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 –:–:– –:–:– –:–:– 0curl: (6) Could not resolve host: smxi.org
Network:
Message: No device data found.
IF-ID-1: wlan0 state: down mac: <filter>
WAN IP: No WAN IP found. Connected to web? SSL issues?
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 62.67 GiB used: 92.8 MiB (0.1%)
ID-1: /dev/mmcblk1 vendor: SK Hynix model: HBG4e size: 29.12 GiB type: SSD
serial: <filter> rev: 0x7 scheme: GPT
ID-2: /dev/mmcblk2 model: 00000 size: 29.81 GiB type: SSD serial: <filter>
scheme: MBR
ID-3: /dev/sda type: USB vendor: Kingston model: DataTraveler 2.0
size: 3.73 GiB type: N/A serial: <filter> rev: 1.00 scheme: MBR
Message: No optical or floppy data found.
Swap:
ID-1: swap-1 type: partition size: 1.37 GiB used: 92.8 MiB (6.6%)
priority: -2 dev: /dev/mmcblk1p3 label: swapantiX
uuid: 3c64a9d2-66e1-45e9-99e8-135edeea13ba
Unmounted:
ID-1: /dev/mmcblk1p1 size: 256 MiB fs: vfat label: EFI System uuid: 6EA4-A31B
ID-2: /dev/mmcblk1p2 size: 27.49 GiB fs: ext4 label: rootantiX22
uuid: bbe2ee24-c9d2-44be-a39e-74223feef770
ID-3: /dev/mmcblk2p1 size: 29.81 GiB fs: exfat label: N/A uuid: 7FFE-DF32
ID-4: /dev/sda1 size: 1.75 GiB fs: iso9660
ID-5: /dev/sda2 size: 4.1 MiB fs: vfat label: EFI-LIVE uuid: 7249-CF0E
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-1:2 info: Action Star Enterprise USB2.0 Hub ports: 5 rev: 2.0
speed: 480 Mb/s power: 100mA chip-ID: 0835:8500 class-ID: 0900
Device-1: 1-1.1:3 info: Action Star Enterprise USB HID type: Keyboard
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 20mA
chip-ID: 0835:8501 class-ID: 0301
Hub-3: 1-1.5:4 info: Action Star Enterprise USB2.0 Hub ports: 5 rev: 2.0
speed: 480 Mb/s power: 100mA chip-ID: 0835:8500 class-ID: 0900
Device-1: 1-1.5.1:5 info: Action Star Enterprise USB HID type: Keyboard
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 20mA
chip-ID: 0835:8502 class-ID: 0301
Device-2: 1-1.5.2:6 info: SiGma Micro Keyboard type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 98mA
chip-ID: 1c4f:0026 class-ID: 0300
Device-3: 1-1.5.4:7 info: Kingston DataTraveler 100 type: Mass Storage
driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA
chip-ID: 0951:1607 class-ID: 0806 serial: <filter>
Device-4: 1-1.5.5:8 info: Pixart Imaging Optical Mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s
power: 100mA chip-ID: 093a:2510 class-ID: 0301
Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 1 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 41.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 215 Uptime: 4m wakeups: 1 Init: SysVinit v: 2.96 runlevel: 5
default: 5 Compilers: gcc: N/A alt: 10 Packages: note: see –pkg apt: 1952
Shell: Bash v: 5.1.4 running-in: xfce4-terminal inxi: 3.3.06Any tips or suggestions?
Harlem
Good morning,
LXDE on Antix22 intermittently generates a “No session for pid…” error and, on Logout there is no option to Shut the system down.
That error, and the ‘missing’ shutdown error does not happen in LXDE on MX-19.4 on this hardware:
[code]
System: Kernel: 4.19.0-21-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0
parameters: BOOT_IMAGE=/vmlinuz-4.19.0-21-amd64
root=UUID=<filter> ro quiet splash
Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 vt: 7 dm: LightDM 1.26.0
Distro: MX-19.4_x64 patito feo March 31 2021 base: Debian GNU/Linux 10 (buster)
Machine: Type: Laptop System: LENOVO product: 2055CTO v: ThinkPad T500 serial: <filter>
Chassis: type: 10 serial: <filter>
Mobo: LENOVO model: 2055CTO serial: <filter> BIOS: LENOVO v: 7VET94WW (3.24 )
date: 12/13/2011
CPU: Info: Dual Core model: Intel Core2 Duo T9600 bits: 64 type: MCP arch: Penryn
family: 6 model-id: 17 (23) stepping: A (10) microcode: A0C cache: L2: 6 MiB
flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 11171
Speed: 1596 MHz min/max: 800/1600 MHz boost: enabled Core speeds (MHz): 1: 1596
2: 1596
Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf mitigation: PTE Inversion; VMX: EPT disabled
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Lenovo driver: i915
v: kernel bus-ID: 00:02.0 chip-ID: 8086:2a42 class-ID: 0300
Device-2: AMD RV635/M86 [Mobility Radeon HD 3650] vendor: Lenovo driver: N/A
alternate: radeon bus-ID: 01:00.0 chip-ID: 1002:9591 class-ID: 0300
Device-3: Lenovo UVC Camera type: USB driver: uvcvideo bus-ID: 2-6:3
chip-ID: 17ef:4807 class-ID: 0e02
Display: x11 server: X.Org 1.20.10 driver: loaded: intel display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920×1080 s-dpi: 96 s-size: 506x285mm (19.9×11.2″)
s-diag: 581mm (22.9″)
Monitor-1: VGA1 res: 1920×1080 hz: 60 dpi: 82 size: 598x336mm (23.5×13.2″)
diag: 686mm (27″)
OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express (CTG) v: 2.1 Mesa 20.3.5
direct render: Yes
Audio: Device-1: Intel 82801I HD Audio vendor: Lenovo ThinkPad T400 driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403
Sound Server-1: ALSA v: k4.19.0-21-amd64 running: yes
Sound Server-2: PulseAudio v: 12.2 running: yes
Network: Device-1: Intel 82567LF Gigabit Network vendor: Lenovo driver: e1000e v: 3.2.6-k
port: 1820 bus-ID: 00:19.0 chip-ID: 8086:10bf class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Ultimate N WiFi Link 5300 driver: iwlwifi v: kernel modules: wl
port: 2000 bus-ID: 03:00.0 chip-ID: 8086:4236 class-ID: 0280
IF: wlan0 state: down mac: <filter>
Drives: Local Storage: total: 1.36 TiB used: 44.22 GiB (3.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ01ACF050 size: 465.76 GiB
block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200
serial: <filter> rev: 1D scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD10JPVX-22JC3T0
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s
type: HDD rpm: 5400 serial: <filter> rev: 1A01
Partition: ID-1: / raw-size: 463.21 GiB size: 454.87 GiB (98.20%) used: 44.05 GiB (9.7%)
fs: ext4 dev: /dev/dm-0 maj-min: 253:0 mapped: rootfs
ID-2: /boot raw-size: 512 MiB size: 487.2 MiB (95.16%) used: 181.8 MiB (37.3%)
fs: ext4 dev: /dev/sda1 maj-min: 8:1
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 1.98 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/dm-1 maj-min: 253:1 mapped: swapfs
Sensors: System Temperatures: cpu: 62.0 C mobo: 61.0 C
Fan Speeds (RPM): fan-1: 3008
Repos: Packages: 2387 note: see –pkg apt: 2371 lib: 1196 flatpak: 16
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian/ buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian/ buster main contrib non-free
2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ buster main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo/ buster test
3: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ buster ahs
Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
1: deb http://linux.teamviewer.com/deb/ stable main
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 195 Uptime: 30m wakeups: 2 Memory: 7.69 GiB used: 1.07 GiB (14.0%)
Init: SysVinit v: 2.93 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 8.3.0
alt: 8 Shell: quick-system-in default: Bash v: 5.0.3 running-in: quick-system-in
inxi: 3.3.06
[/code]but it is happening on another Lenovo T500 being used as a test bed for Antix 22.
Looking around the web I’ve found that the “No session for pid…” error apparently has a history going back quite awhile (2014?) but I’ve found no applicable resolutions (Ubuntu doesn’t count) so I am wondering if there’s a known solution to both the “pid” error and the’no shutdown’ option.
TIA,
- This topic was modified 6 months, 2 weeks ago by Harlem.
In reply to: testing 5.10 kernel
Robin
hello @anticapitalista ,
have you tried the default 5.10 Debian kernel?
If that works, then there is something wrong with our 5.10 kernel on some hard drive.
If not, then the fault lies with the 5.10 series.I had not checked this before, but I’ve managed to do some testing early this morning. Here the results:
Since there was no debian kernel 5.10.142 I have tested the nearest available, one before and one after, (5.10.140-1 and 5.10.149-2 both), which come whith packages linux-image-5.10.0-18-686-pae (signed) and linux-image-5.10.0-19-686-pae (signed). As with the most recent 5.19.0-0.deb11.2-686-pae kernel from debian backports antix boots with them straight up to the desktop, no issues. The 5.19 kernel comes with a perfecly stable, fast and fluid noveau (at least when running single head this one is absoulutely equivalent to what I was used from proprietary nvidia driver stuff, but I had not time to test in a multihead setup with an additional screen or TV out by now.).
So I decided to re-check your 5.10.142-antix.2 kernel, I apt-purged it from the system first, then remastered, installed it anew from repos, using apt. But after remaster and live kernel update it fails again with the same issue, not detecting the graphics card properly. So unfortunately this was not an arbitrary faulty install. Then I gave the 5.10.137-antix.1-686-smp-pae kernel a try, same issue with this one, it stops on console login (It is possible to force them into desktop using the fb mode instead of noveau, but only blurry, flickering and lowres screen then, no way to change it to proper resolution using xrandr.) So I reinstalled the 5.19 debian again to the very stick, without changing anything else, and again it ran straight through to desktop.
While installing the 5.x kernels I noticed an additional issue, which might get addressed also (but it doesn’t keep the kernels from booting to desktop, the debian kernels suffer from it also):
$ sudo apt-get install linux-headers-5.10.142-antix.2-686-smp-pae linux-image-5.10.142-antix.2-686-smp-pae Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Die folgenden NEUEN Pakete werden installiert: linux-headers-5.10.142-antix.2-686-smp-pae linux-image-5.10.142-antix.2-686-smp-pae 0 aktualisiert, 2 neu installiert, 0 zu entfernen und 267 nicht aktualisiert. Es müssen 53,8 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 224 MB Plattenplatz zusätzlich benutzt. Holen:1 http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye/main i386 linux-headers-5.10.142-antix.2-686-smp-pae i386 5.10.142-antix.2-686-smp-pae-1 [8.007 kB] Holen:2 http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye/main i386 linux-image-5.10.142-antix.2-686-smp-pae i386 5.10.142-antix.2-686-smp-pae-1 [45,8 MB] Es wurden 53,8 MB in 44 s geholt (1.224 kB/s). Vormals nicht ausgewähltes Paket linux-headers-5.10.142-antix.2-686-smp-pae wird gewählt. (Lese Datenbank ... 288621 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../linux-headers-5.10.142-antix.2-686-smp-pae_5.10.142-antix.2-686-smp-pae-1_i386.deb ... Entpacken von linux-headers-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) ... Vormals nicht ausgewähltes Paket linux-image-5.10.142-antix.2-686-smp-pae wird gewählt. Vorbereitung zum Entpacken von .../linux-image-5.10.142-antix.2-686-smp-pae_5.10.142-antix.2-686-smp-pae-1_i386.deb ... Entpacken von linux-image-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) ... linux-image-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) wird eingerichtet ... dkms: running auto installation service for kernel 5.10.142-antix.2-686-smp-pae: Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area... make -j1 KERNELRELEASE=5.10.142-antix.2-686-smp-pae KVER=5.10.142-antix.2-686-smp-pae...... cleaning build area... DKMS: build completed. wl.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.142-antix.2-686-smp-pae/updates/dkms/ depmod.... Warning: Unable to find an initial ram disk that I know how to handle. Will not try to make an initrd. DKMS: install completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area... make -j1 KERNELRELEASE=5.10.142-antix.2-686-smp-pae -C /lib/modules/5.10.142-antix.2-686-smp-pae/build M=/var/lib/dkms/exfat/5.9/build...(bad exit status: 2) Error! Bad return status for module build on kernel: 5.10.142-antix.2-686-smp-pae (i686) Consult /var/lib/dkms/exfat/5.9/build/make.log for more information. . update-initramfs: Generating /boot/initrd.img-5.10.142-antix.2-686-smp-pae cryptsetup: ERROR: Couldn't resolve device overlay cryptsetup: WARNING: Couldn't determine root device I: The initramfs will attempt to resume from /dev/sda9 I: (UUID=2d151628-e6f1-4e23-a8a6-7820d17b8a14) I: Set the RESUME variable to override this. linux-headers-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) wird eingerichtet ...$ cat /var/lib/dkms/exfat/5.9/build/make.log DKMS make.log for exfat-5.9 for kernel 5.10.142-antix.2-686-smp-pae (i686) Fr 28. Okt 03:13:11 CEST 2022 make: Verzeichnis „/usr/src/linux-headers-5.10.142-antix.2-686-smp-pae“ wird betreten CC [M] /var/lib/dkms/exfat/5.9/build/inode.o In file included from /var/lib/dkms/exfat/5.9/build/exfat_fs.h:14, from /var/lib/dkms/exfat/5.9/build/inode.c:16: /var/lib/dkms/exfat/5.9/build/compat.h:12:2: error: #error "This driver doesn't support v5.8+, " "please use the included driver from your kernel" 12 | #error "This driver doesn't support v5.8+, " \ | ^~~~~ /var/lib/dkms/exfat/5.9/build/inode.c: In function ‘exfat_readpages’: /var/lib/dkms/exfat/5.9/build/inode.c:367:9: error: implicit declaration of function ‘mpage_readpages’; did you mean ‘mpage_readpage’? [-Werror=implicit-function-declaration] 367 | return mpage_readpages(mapping, pages, nr_pages, exfat_get_block); | ^~~~~~~~~~~~~~~ | mpage_readpage cc1: some warnings being treated as errors make[1]: *** [scripts/Makefile.build:286: /var/lib/dkms/exfat/5.9/build/inode.o] Fehler 1 make: *** [Makefile:1845: /var/lib/dkms/exfat/5.9/build] Fehler 2 make: Verzeichnis „/usr/src/linux-headers-5.10.142-antix.2-686-smp-pae“ wird verlassenAnd then, I noticed the .md5 chcksum files of vmlinuz, initrd and linuxfs files the are lost sometimes when remastering and/or rolling back, so there is no checksum any longer present. Couldn’t find out what triggers the loss, sometimes it happens, and sometimes the old .md5 file is perfectly backuped. But the system works still without these, and I believe they can easily get recreated manually if needed, if I’m not mistaken. Does antiX check the files against them while starting up?
Technical details:
The logs from debian 5.10.0-18 and 5.10.0-19 look exactly like the one from 5.19.0 I’ve posted above, so I don’t repost it here (in case you need them, just let me know, I’ve stored them) Here’s what I’ve got from 5.10.137-antix.1-686-smp-pae kernel:
(inxi -zv8)
System: Kernel: 5.10.137-antix.1-686-smp-pae i686 bits: 32 compiler: gcc v: 10.2.1 parameters: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all xorg=nouveau Console: tty 1 Distro: antiX-21_386-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: N/A Chassis: No Enclosure type: 1 serial: N/A Mobo: Notebook model: RIM2000 serial: N/A BIOS: Phoenix v: RIM00F0A date: 05/27/2005 Battery: ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) volts: 16.6 min: 14.8 model: ARIMA LI4403A type: Unknown serial: <filter> status: Full Memory: RAM: total: 1.96 GiB used: 288.3 MiB (14.3%) Array-1: capacity: 3 GiB note: check slots: 2 EC: None max-module-size: 1024 MiB note: est. voltage: 3.3 Device-1: M1 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> Device-2: M2 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> PCI Slots: Message: No PCI Slot data found. CPU: Info: Single Core model: Intel Pentium M socket: U1 bits: 32 type: MCP arch: M Dothan family: 6 model-id: D (13) stepping: 8 microcode: 20 cache: L1: 32 KiB L2: 2 MiB bogomips: 3457 Speed: 800 MHz min/max: 800/1733 MHz base/boost: 1733/500 volts: 3.3 V Core speed (MHz): 1: 800 Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae pbe pge pse pti sep ss sse sse2 tm tm2 tsc vme Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported Type: l1tf mitigation: PTE Inversion Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled Type: meltdown mitigation: PTI Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: N/A alternate: nvidiafb, nouveau bus-ID: 01:00.0 chip-ID: 10de:0148 class-ID: 0300 Display: server: X.org 1.20.11 driver: loaded: nouveau tty: 80x25 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403 Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation driver: saa7134 v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480 Sound Server-1: ALSA v: k5.10.137-antix.1-686-smp-pae running: yes Network: Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 port: 2000 bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq modules: wl port: 2000 bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280 IF: eth1 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 151.75 GiB used: 97.23 GiB (64.1%) ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A family: Momentus 5400.2 size: 93.16 GiB block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 3.02 temp: 51 C scheme: MBR SMART: yes state: enabled health: PASSED on: 7y 259d 22h cycles: 9859 ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 8.01 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) used: 29.79 GiB (51.8%) fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb uuid: 862f493d-6951-444f-a3f6-734244b241e7 ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 5.4 MiB (11.1%) fs: vfat block-size: 512 B dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) used: 30.32 GiB (72.8%) fs: ext3 block-size: 4096 B dev: /dev/sda7 maj-min: 8:7 label: /daten3 uuid: c1bc867a-ec28-436d-831b-e47f334471ce ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) fs: ext3 block-size: 4096 B dev: /dev/sda8 maj-min: 8:8 label: /daten4 uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) fs: ext3 block-size: 4096 B dev: /dev/sda5 maj-min: 8:5 label: /home uuid: 94021be3-c160-4166-a151-92ad72b26f9a ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 7.95 GiB (81.6%) fs: ext4 block-size: 4096 B dev: /dev/sda6 maj-min: 8:6 label: antiX uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 4.3 GiB (55.2%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal uuid: 19eaea0e-493b-4007-8eff-f14aca40363f ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) fs: ext4 block-size: 4096 B dev: /dev/sda10 maj-min: 8:10 label: N/A uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 2.16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda9 maj-min: 8:9 label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 serial: <filter> Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 2-1:2 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 093a:2533 class-ID: 0300 Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Sensors: Message: No sensor data found. Is lm-sensors configured? Repos: Packages: apt: 1833 lib: 879 Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.de.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.de.debian.org/debian/ bullseye main contrib non-free 2: deb http://security.debian.org/ bullseye-security main contrib non-free No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 of 100 1: cpu: 8.0% command: sudo pid: 3958 mem: 4.54 MiB (0.2%) 2: cpu: 0.6% command: init pid: 1 mem: 2.00 MiB (0.0%) 3: cpu: 0.3% command: udevd pid: 2338 mem: 3.46 MiB (0.1%) 4: cpu: 0.2% command: login pid: 3827 mem: 3.67 MiB (0.1%) 5: cpu: 0.1% command: [usb-storage] pid: 502 mem: 0.00 MiB (0.0%) Memory top: 5 of 100 1: mem: 6.54 MiB (0.3%) command: wpa_supplicant pid: 3704 cpu: 0.0% 2: mem: 5.98 MiB (0.2%) command: cupsd pid: 3356 cpu: 0.0% 3: mem: 4.54 MiB (0.2%) command: sudo pid: 3958 cpu: 8.0% 4: mem: 4.36 MiB (0.2%) command: -bash pid: 3848 cpu: 0.0% 5: mem: 4.05 MiB (0.2%) command: connmand pid: 3694 cpu: 0.0% Info: Processes: 100 Uptime: 3m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: tty 1 inxi: 3.3.06(from lspci –vnn)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV43M [GeForce Go 6600] [10de:0148] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Rioworks NV43M [GeForce Go 6600] [161f:203d] Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0 Memory at a0000000 (32-bit, non-prefetchable) Memory at c0000000 (64-bit, prefetchable) Memory at 90000000 (64-bit, non-prefetchable) Expansion ROM at 000c0000 [virtual] [disabled] Capabilities: [60] Power Management version 2 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Kernel modules: nvidiafb, nouveau(initrd.log)
Run custom code before reading boot codes: /live/custom/antiX/0.sh Translate to de Schrift aufLat15-VGA16 setzen setfont /live/locale/fonts/Lat15-VGA16.psf -C /dev/console Neue Bildschirmbreite 80 === initrd bootstrap ================================================== initrd init started at 0.23 seconds Willkommen bei antiX 21 (Grup Yorum) 32-bit pae! BusyBox v1.31.1 (2021-02-03 15:54:12 MST) multi-call binary. ntfs-3g 2017.3.23AR.3 integrated FUSE 28 initrd version: 8.30.14-x08 initrd built: Fri, 04 Jun 2021 11:43:21 +0000 Total Memory: 2009 M Used Memory: 38 M Linux kernel: 5.10.137-antix.1-686-smp-pae Screen width: 80 Kernel arch: i686 Hardware: Notebook RIM2000 Augenblickliche Bootparameter: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all xorg=nouveau overlay gefunden Lade Hardware spezifische Module ... Prüfe usb,cd Geräte. Suche nach boot Datei(en) antiX/linuxfs Herausgefilterte Geräte /dev/sr0 Versuch wiederholen für 15 Sekunden . Neue(s) Gerät(e) /dev/sdb2 /dev/sdb1 /dev/sdb /dev/sr0 gefunden mount -t vfat -o umask=000,dmask=002,fmask=113,shortname=winnt,uid=1000,gid=1000 /dev/sdb2 /live/boot-dev mount -t ext4 -o ro,noatime /dev/sdb1 /live/boot-dev Eingehängtes boot Gerät. Gerät /dev/sdb1 eingehängt auf /live/boot-dev boot Gerät Dateisystem: ext4 boot device model: Flash Disk Spent 1.63 seconds looking for boot file(s) antiX/linuxfs loop times: 0.25 boot device uuid: 862f493d-6951-444f-a3f6-734244b241e7 BOOT_MP: /live/boot-dev SQFILE_DEV: /dev/sdb1 SQFILE_MP /live/boot-dev Starte Generator für Zufallsnummern... Speichere zufälligen seed Mount file /live/boot-dev/antiX/linuxfs at /live/linux mount -t squashfs -o loop,ro /live/boot-dev/antiX/linuxfs /live/linux sqfs_vid: ==== f87b998e0830a50354e045cda4145991 LD_PATH: /live/linux/lib:/live/linux/lib/i386-linux-gnu:/live/linux/usr/lib Loaded 13 module(s) nls_utf8 nls_cp437 uas usb_storage hid_generic uhci_hcd firewire_ohci firewire_core dm_crypt dm_mod overlay battery fotg210_hcd precheck filesystem on /dev/sdb1 Erstellen aufs ram tmpfs bei /live/aufs-ram (1576 MB) /bin/mount -t tmpfs -o size=1576m,noatime tmpfs /live/aufs-ram Mount overlayfs at /live/aufs mount -t overlay overlay -o lowerdir=/live/linux,upperdir=/live/aufs-ram/upper,workdir=/live/aufs-ram/work /live/aufs Load microcode Found one video display device Erstellen /media tmpfs bei /live/aufs/media (10 MB) /bin/mount -t tmpfs -o size=10m,noatime tmpfs /live/aufs/media Erstellen /run tmpfs bei /live/aufs/run (1111 MB) /bin/mount -t tmpfs -o size=1111m,mode=755,nodev,noatime tmpfs /live/aufs/run Erstellen /live tmpfs bei /live/aufs/live (100 MB) /bin/mount -t tmpfs -o size=100m,mode=755,noatime tmpfs /live/aufs/live Run custom code before: /live/custom/antiX/0.sh mount --move /live/aufs-ram /live/aufs/live/aufs-ram mount --move /live/boot-dev /live/aufs/live/boot-dev mount --move /live/linux /live/aufs/live/linux Run custom code after: /live/custom/antiX/0.sh Run custom code before running live init.d scripts: /live/custom/antiX/8.sh Das initrd init Programm brauchte 16.81 Sekunden ======================================================================Windows is like a submarine. Open a window and serious problems will start.
In reply to: What are you “here” with today?
Brian Masinick
Different information options than the ones I usually supply – and a different list of things included on my system – here’s information using the zv5 view:
pinxi -zv5 System: Kernel: 6.0.5-x64v2-xanmod1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 Desktop: IceWM v: 3.1.0 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) volts: 12.7 min: 11.3 model: HP Primary status: not charging Memory: RAM: total: 7.1 GiB used: 599.4 MiB (8.2%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: 6-core model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64 type: MT MCP arch: Zen 2 rev: 1 cache: L1: 384 KiB L2: 3 MiB L3: 8 MiB Speed (MHz): avg: 3724 high: 4056 min/max: 400/4056 boost: enabled cores: 1: 4056 2: 4056 3: 4056 4: 4056 5: 4056 6: 4056 7: 2071 8: 4056 9: 4056 10: 4056 11: 4056 12: 2068 bogomips: 50308 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm Graphics: Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5.1 bus-ID: 03:00.0 temp: 45.0 C Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo bus-ID: 1-3:3 Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu resolution: 1920x1080~60Hz API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.48.0 6.0.5-x64v2-xanmod1 LLVM 11.0.1) direct render: Yes Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus-ID: 03:00.1 Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard driver: snd_rn_pci_acp3x v: kernel bus-ID: 03:00.5 Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus-ID: 03:00.6 Sound API: ALSA v: k6.0.5-x64v2-xanmod1 running: yes Network: Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel port: f000 bus-ID: 01:00.0 IF: wlan0 state: up mac: <filter> Bluetooth: Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-4:4 Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: warning rfk-block: hardware: no software: yes address: <filter> Drives: Local Storage: total: 238.47 GiB used: 27.53 GiB (11.5%) ID-1: /dev/nvme0n1 vendor: Toshiba model: KBG40ZNV256G KIOXIA size: 238.47 GiB temp: 28.9 C Message: No optical or floppy data found. Partition: ID-1: / size: 47.76 GiB used: 27.46 GiB (57.5%) fs: ext4 dev: /dev/nvme0n1p3 label: rootantiX21 uuid: e1d85e10-a42a-4ed5-a98e-c860607e6910 ID-2: /boot/efi size: 256 MiB used: 72.8 MiB (28.5%) fs: vfat dev: /dev/nvme0n1p1 label: SYSTEM uuid: 669B-9111 Swap: ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) dev: /dev/nvme0n1p6 label: N/A uuid: d5ee9225-6bf8-4ea5-9299-547b7272c289 Sensors: System Temperatures: cpu: 48.9 C mobo: N/A gpu: amdgpu temp: 46.0 C Fan Speeds (RPM): fan-1: 0 fan-2: 0 Info: Processes: 267 Uptime: 2m Init: runit runlevel: 2 Compilers: gcc: 10.2.1 Packages: 1678 Shell: Bash v: 5.1.4 pinxi: 3.3.22-12--
Brian MasinickIn reply to: testing 5.10 kernel
Just for comparison, I’ve installed latest debian default kernel on antiX 21, since I’ve read while searching for a solution for this nouveau issue in 5.10 kernel from above, that these issues should vanish in 5.15 kernel magically. In the repos doesn’t seem to exist any 5.15 kernel, so I installed latest available default debian kernel from the backport repos:
linux-image-5.19.0-0.deb11.2-686-pae: Installiert: 5.19.11-1~bpo11+1 Installationskandidat: 5.19.11-1~bpo11+1 Versionstabelle: *** 5.19.11-1~bpo11+1 100 100 http://deb.debian.org/debian bullseye-backports/main i386 Packages 100 /var/lib/dpkg/statusAnd what should I say, actually the issue from the 5.10 kernel is fixed, it boots antiX straight up to desktop. It even uses nouveau driver on a speed and clean view I’ve never seen from nouveau ever before here. This comes very near already to the proprietary nvidia drivers. Will need to get some further stress testing, but it looks promising, really. For now it seems to run absolutely stable. Maybe I can get rid of the proprietary nvidia stuff in near future and switch to 5.x kernel series for everyday work… I’m writing these lines from this very system right now. It’s amazing! Here the details:
(inxi -zv8)
System: Kernel: 5.19.0-0.deb11.2-686-pae i686 bits: 32 compiler: gcc v: 10.2.1 parameters: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all Desktop: IceWM 2.9.4 dm: N/A Distro: antiX-21_386-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: N/A Chassis: No Enclosure type: 1 serial: N/A Mobo: Notebook model: RIM2000 serial: N/A BIOS: Phoenix v: RIM00F0A date: 05/27/2005 Battery: ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) volts: 16.6 min: 14.8 model: ARIMA LI4403A type: Unknown serial: <filter> status: Full Memory: RAM: total: 1.96 GiB used: 368.5 MiB (18.3%) Array-1: capacity: 3 GiB note: check slots: 2 EC: None max-module-size: 1024 MiB note: est. voltage: 3.3 Device-1: M1 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> Device-2: M2 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> PCI Slots: Message: No PCI Slot data found. CPU: Info: Single Core model: Intel Pentium M socket: U1 bits: 32 type: MCP arch: M Dothan family: 6 model-id: D (13) stepping: 8 microcode: 20 cache: L1: 32 KiB L2: 2 MiB bogomips: 3457 Speed: 800 MHz min/max: 800/1733 MHz base/boost: 1733/500 volts: 3.3 V Core speed (MHz): 1: 800 Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae pbe pge pse pti sep ss sse sse2 tm tm2 tsc vme Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported Type: l1tf mitigation: PTE Inversion Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled Type: meltdown mitigation: PTI Type: mmio_stale_data status: Unknown: No mitigations Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: nouveau v: kernel bus-ID: 01:00.0 chip-ID: 10de:0148 class-ID: 0300 Display: server: X.Org 1.20.11 driver: loaded: nouveau unloaded: fbdev,modesetting,vesa alternate: nv display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 380x238mm (15.0x9.4") s-diag: 448mm (17.7") Monitor-1: LVDS-1 res: 1440x900 hz: 60 dpi: 100 size: 367x230mm (14.4x9.1") diag: 433mm (17.1") OpenGL: renderer: NV43 v: 2.1 Mesa 20.3.5 direct render: Yes Audio: Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403 Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation driver: saa7134 v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480 Sound Server-1: ALSA v: k5.19.0-0.deb11.2-686-pae running: yes Network: Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 port: 2000 bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq port: 2000 bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280 IF: eth1 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 151.75 GiB used: 91.46 GiB (60.3%) ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A family: Momentus 5400.2 size: 93.16 GiB block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 3.02 temp: 51 C scheme: MBR SMART: yes state: enabled health: PASSED on: 7y 259d 4h cycles: 9857 ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 8.01 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) used: 19.68 GiB (34.2%) fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb uuid: 862f493d-6951-444f-a3f6-734244b241e7 ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 5.4 MiB (11.1%) fs: vfat block-size: 512 B dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) used: 34.65 GiB (83.2%) fs: ext3 block-size: 4096 B dev: /dev/sda7 maj-min: 8:7 label: /daten3 uuid: c1bc867a-ec28-436d-831b-e47f334471ce ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) fs: ext3 block-size: 4096 B dev: /dev/sda8 maj-min: 8:8 label: /daten4 uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) fs: ext3 block-size: 4096 B dev: /dev/sda5 maj-min: 8:5 label: /home uuid: 94021be3-c160-4166-a151-92ad72b26f9a ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 7.95 GiB (81.6%) fs: ext4 block-size: 4096 B dev: /dev/sda6 maj-min: 8:6 label: antiX uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 4.3 GiB (55.2%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal uuid: 19eaea0e-493b-4007-8eff-f14aca40363f ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) fs: ext4 block-size: 4096 B dev: /dev/sda10 maj-min: 8:10 label: N/A uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 2.16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda9 maj-min: 8:9 label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 1-1:2 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 093a:2533 class-ID: 0300 Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 4-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 serial: <filter> Sensors: System Temperatures: cpu: 66.4 C mobo: 56.0 C Fan Speeds (RPM): N/A Repos: Packages: apt: 1824 lib: 879 Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.de.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.de.debian.org/debian/ bullseye main contrib non-free 2: deb http://security.debian.org/ bullseye-security main contrib non-free No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 of 124 1: cpu: 7.0% command: sudo pid: 6517 mem: 4.56 MiB (0.2%) 2: cpu: 4.0% command: zzzfm pid: 5928 mem: 34.3 MiB (1.7%) 3: cpu: 3.1% command: xorg pid: 3998 mem: 50.7 MiB (2.5%) 4: cpu: 1.2% command: gtkdialog pid: 6233 mem: 24.2 MiB (1.2%) 5: cpu: 0.8% command: conky pid: 4420 mem: 8.95 MiB (0.4%) Memory top: 5 of 124 1: mem: 50.7 MiB (2.5%) command: xorg pid: 3998 cpu: 3.1% 2: mem: 34.3 MiB (1.7%) command: zzzfm pid: 5928 cpu: 4.0% 3: mem: 31.6 MiB (1.5%) command: cmst pid: 4403 cpu: 0.0% 4: mem: 28.1 MiB (1.3%) command: roxterm pid: 4844 cpu: 0.8% 5: mem: 24.2 MiB (1.2%) command: gtkdialog pid: 6233 cpu: 1.2% Info: Processes: 124 Uptime: 11m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: roxterm inxi: 3.3.06(initrd.log)
Run custom code before reading boot codes: /live/custom/antiX/0.sh Translate to de Schrift aufLat15-VGA16 setzen setfont /live/locale/fonts/Lat15-VGA16.psf -C /dev/console Neue Bildschirmbreite 80 === initrd bootstrap ================================================== initrd init started at 0.36 seconds Coldplug loop pid: 131 Willkommen bei antiX 21 (Grup Yorum) 32-bit pae! BusyBox v1.31.1 (2021-02-03 15:54:12 MST) multi-call binary. ntfs-3g 2017.3.23AR.3 integrated FUSE 28 initrd version: 8.30.14-x08 initrd built: Fri, 04 Jun 2021 11:43:21 +0000 Total Memory: 2010 M Used Memory: 60 M Linux kernel: 5.19.0-0.deb11.2-686-pae Screen width: 80 Kernel arch: i686 Hardware: Notebook RIM2000 Augenblickliche Bootparameter: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all overlay gefunden Lade Hardware spezifische Module ... Prüfe usb,cd Geräte. Suche nach boot Datei(en) antiX/linuxfs Herausgefilterte Geräte /dev/sr0 Versuch wiederholen für 15 Sekunden ... Neue(s) Gerät(e) /dev/sdb2 /dev/sdb1 /dev/sdb /dev/sr0 gefunden mount -t vfat -o umask=000,dmask=002,fmask=113,shortname=winnt,uid=1000,gid=1000 /dev/sdb2 /live/boot-dev mount -t ext4 -o ro,noatime /dev/sdb1 /live/boot-dev Eingehängtes boot Gerät. Gerät /dev/sdb1 eingehängt auf /live/boot-dev boot Gerät Dateisystem: ext4 boot device model: Flash Disk Spent 2.81 seconds looking for boot file(s) antiX/linuxfs loop times: 0.37 0.44 0.40 boot device uuid: 862f493d-6951-444f-a3f6-734244b241e7 BOOT_MP: /live/boot-dev SQFILE_DEV: /dev/sdb1 SQFILE_MP /live/boot-dev Starte Generator für Zufallsnummern... Speichere zufälligen seed Mount file /live/boot-dev/antiX/linuxfs at /live/linux mount -t squashfs -o loop,ro /live/boot-dev/antiX/linuxfs /live/linux sqfs_vid: ==== 8f7f5d0737879da9f09b8c3ad7b69283 LD_PATH: /live/linux/lib:/live/linux/lib/i386-linux-gnu:/live/linux/usr/lib Loaded 50 module(s) squashfs loop ext4 jbd2 mbcache crc16 nls_ascii vfat fat nls_cp437 uas usb_storage hid_generic usbhid hid sr_mod cdrom sd_mod t10_pi crct10dif_generic crc_t10dif crct10dif_common crc64_rocksoft crc64 ehci_pci uhci_hcd ata_generic ahci libahci ata_piix libata scsi_mod scsi_common sdhci_pci sdhci cqhci firewire_ohci firewire_core crc_itu_t dm_crypt dm_mod dax mmc_block mmc_core crc32c_generic overlay battery ehci_hcd usbcore usb_common precheck filesystem on /dev/sdb1 Erstellen aufs ram tmpfs bei /live/aufs-ram (1560 MB) /bin/mount -t tmpfs -o size=1560m,noatime tmpfs /live/aufs-ram Mount overlayfs at /live/aufs mount -t overlay overlay -o lowerdir=/live/linux,upperdir=/live/aufs-ram/upper,workdir=/live/aufs-ram/work /live/aufs Found one video display device kill coldplug loop pid: 131 Erstellen /media tmpfs bei /live/aufs/media (10 MB) /bin/mount -t tmpfs -o size=10m,noatime tmpfs /live/aufs/media Erstellen /run tmpfs bei /live/aufs/run (1111 MB) /bin/mount -t tmpfs -o size=1111m,mode=755,nodev,noatime tmpfs /live/aufs/run Erstellen /live tmpfs bei /live/aufs/live (100 MB) /bin/mount -t tmpfs -o size=100m,mode=755,noatime tmpfs /live/aufs/live Run custom code before: /live/custom/antiX/0.sh mount --move /live/aufs-ram /live/aufs/live/aufs-ram mount --move /live/boot-dev /live/aufs/live/boot-dev mount --move /live/linux /live/aufs/live/linux Run custom code after: /live/custom/antiX/0.sh Coldplug loop pid: 1198 Run custom code before running live init.d scripts: /live/custom/antiX/8.sh kill coldplug loop pid: 1198 Das initrd init Programm brauchte 23.30 Sekunden ======================================================================(live-init.log)
Thu Oct 27 10:44:53 CEST 2022 /live/etc/init.d/live-usb-save live-usb-save: Restore state information Restore machine specific state file /etc/udev/rules.d/70-persistent-net.rules Restore machine specific state file /var/lib/connman/wifi_0012f006fa18_574b3233_managed_psk/settings Restore general state file /etc/fstab.mount Restore general state file /var/log/live/persist-save.log Thu Oct 27 10:44:53 CEST 2022 /live/etc/init.d/live-L10n live-L10n: Lokalisierung der Konsole und Zeitzone Einstellung der Zeitzone und der Ortszeit auf Europe/Berlin Einstellung des Gebietsschema auf de_DE.UTF-8 Thu Oct 27 10:44:54 CEST 2022 /live/etc/init.d/live-init live-init: Lokalisierung/Konfiguration X-Window Alle Geräte werden gemountet make-fstab: Remove all dynamic entries from /etc/fstab make-fstab: Create new /etc/fstab make-fstab: Automount /dev/sda1 at /media/antiX-Frugal make-fstab: Automount /dev/sda5 at /media/_home make-fstab: Automount /dev/sda6 at /media/antiX make-fstab: Automount /dev/sda7 at /media/_daten3 make-fstab: Automount /dev/sda8 at /media/_daten4 make-fstab: Automount /dev/sda10 at /media/sda10 make-fstab: Automount /dev/sdb2 at /media/ANTIX-UEFI make-fstab: Put 9 hard drive entries into /etc/fstab make-fstab: Put 1 removable entry into /etc/fstab Repository-Lokalisierung auf Europe/Berlin Menü-Lokalisierung auf /live/etc/init.d/live-init in /etc/skel Einstellung xkb-layout auf de,us Einstellung xkb-model auf pc105 Einstellung xkb-variant auf Einstellung xkb-options auf grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll CONSOLE KEYMAP: /etc/default/keyboard Nach Hardware-spezifischen Video-Module wird gescannt... KMS Video-Modul(e) gefunden drm_display_helper drm_ttm_helper nouveau Standardbenutzer demo gefunden Thu Oct 27 10:45:03 CEST 2022 /live/etc/init.d/live-disable-services live-disable-services: Customizing services Disabling some services (L, lean) Disabling more services (X, Xtralean)(Xorg.0.log)
[ 52.484] X.Org X Server 1.20.11 X Protocol Version 11, Revision 0 [ 52.484] Build Operating System: linux Debian [ 52.484] Current Operating System: Linux antix1 5.19.0-0.deb11.2-686-pae #1 SMP PREEMPT_DYNAMIC Debian 5.19.11-1~bpo11+1 (2022-10-03) i686 [ 52.484] Kernel command line: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all [ 52.484] Build Date: 10 November 2021 11:00:13AM [ 52.484] xorg-server 2:1.20.11-1.0nosystemd1 (https://www.debian.org/support) [ 52.484] Current version of pixman: 0.40.0 [ 52.484] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 52.484] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 52.484] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 10:45:35 2022 [ 52.498] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 52.498] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 52.506] (==) No Layout section. Using the first Screen section. [ 52.506] (==) No screen section available. Using defaults. [ 52.506] (**) |-->Screen "Default Screen Section" (0) [ 52.506] (**) | |-->Monitor "<default monitor>" [ 52.507] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 52.507] (==) Automatically adding devices [ 52.507] (==) Automatically enabling devices [ 52.507] (==) Automatically adding GPU devices [ 52.507] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 52.529] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 52.529] Entry deleted from font path. [ 52.531] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 52.531] Entry deleted from font path. [ 52.531] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 52.531] Entry deleted from font path. [ 52.531] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 52.531] (==) ModulePath set to "/usr/lib/xorg/modules" [ 52.532] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 52.532] (II) Loader magic: 0x731700 [ 52.532] (II) Module ABI versions: [ 52.532] X.Org ANSI C Emulation: 0.4 [ 52.532] X.Org Video Driver: 24.1 [ 52.532] X.Org XInput driver : 24.1 [ 52.532] X.Org Server Extension : 10.0 [ 52.532] (II) xfree86: Adding drm device (/dev/dri/card0) [ 52.561] (--) PCI:*(1@0:0:0) 10de:0148:161f:203d rev 162, Mem @ 0xa0000000/67108864, 0xc0000000/134217728, 0x90000000/16777216, BIOS @ 0x????????/131072 [ 52.561] (II) LoadModule: "glx" [ 52.572] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 52.676] (II) Module glx: vendor="X.Org Foundation" [ 52.676] compiled for 1.20.11, module version = 1.0.0 [ 52.676] ABI class: X.Org Server Extension, version 10.0 [ 52.937] (==) Matched nouveau as autoconfigured driver 0 [ 52.937] (==) Matched nv as autoconfigured driver 1 [ 52.937] (==) Matched modesetting as autoconfigured driver 2 [ 52.937] (==) Matched fbdev as autoconfigured driver 3 [ 52.937] (==) Matched vesa as autoconfigured driver 4 [ 52.937] (==) Assigned the driver to the xf86ConfigLayout [ 52.937] (II) LoadModule: "nouveau" [ 52.938] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 52.979] (II) Module nouveau: vendor="X.Org Foundation" [ 52.979] compiled for 1.20.10, module version = 1.0.17 [ 52.979] Module class: X.Org Video Driver [ 52.979] ABI class: X.Org Video Driver, version 24.1 [ 52.979] (II) LoadModule: "nv" [ 52.981] (WW) Warning, couldn't open module nv [ 52.981] (EE) Failed to load module "nv" (module does not exist, 0) [ 52.981] (II) LoadModule: "modesetting" [ 52.981] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 52.995] (II) Module modesetting: vendor="X.Org Foundation" [ 52.996] compiled for 1.20.11, module version = 1.20.11 [ 52.996] Module class: X.Org Video Driver [ 52.996] ABI class: X.Org Video Driver, version 24.1 [ 52.996] (II) LoadModule: "fbdev" [ 52.997] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 53.011] (II) Module fbdev: vendor="X.Org Foundation" [ 53.011] compiled for 1.20.0, module version = 0.5.0 [ 53.011] Module class: X.Org Video Driver [ 53.011] ABI class: X.Org Video Driver, version 24.0 [ 53.011] (II) LoadModule: "vesa" [ 53.011] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 53.019] (II) Module vesa: vendor="X.Org Foundation" [ 53.019] compiled for 1.20.9, module version = 2.5.0 [ 53.019] Module class: X.Org Video Driver [ 53.019] ABI class: X.Org Video Driver, version 24.1 [ 53.019] (II) NOUVEAU driver Date: Sat Jan 23 12:24:42 2021 -0500 [ 53.019] (II) NOUVEAU driver for NVIDIA chipset families : [ 53.019] RIVA TNT (NV04) [ 53.019] RIVA TNT2 (NV05) [ 53.019] GeForce 256 (NV10) [ 53.020] GeForce 2 (NV11, NV15) [ 53.020] GeForce 4MX (NV17, NV18) [ 53.020] GeForce 3 (NV20) [ 53.020] GeForce 4Ti (NV25, NV28) [ 53.020] GeForce FX (NV3x) [ 53.020] GeForce 6 (NV4x) [ 53.020] GeForce 7 (G7x) [ 53.020] GeForce 8 (G8x) [ 53.020] GeForce 9 (G9x) [ 53.020] GeForce GTX 2xx/3xx (GT2xx) [ 53.020] GeForce GTX 4xx/5xx (GFxxx) [ 53.020] GeForce GTX 6xx/7xx (GKxxx) [ 53.020] GeForce GTX 9xx (GMxxx) [ 53.021] GeForce GTX 10xx (GPxxx) [ 53.021] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 53.021] (II) FBDEV: driver for framebuffer: fbdev [ 53.021] (II) VESA: driver for VESA chipsets: vesa [ 53.021] (++) using VT number 7 [ 53.029] (II) [drm] nouveau interface version: 1.3.1 [ 53.029] (WW) Falling back to old probe method for modesetting [ 53.029] (WW) Falling back to old probe method for fbdev [ 53.029] (II) Loading sub module "fbdevhw" [ 53.030] (II) LoadModule: "fbdevhw" [ 53.030] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 53.045] (II) Module fbdevhw: vendor="X.Org Foundation" [ 53.045] compiled for 1.20.11, module version = 0.0.2 [ 53.045] ABI class: X.Org Video Driver, version 24.1 [ 53.045] (II) Loading sub module "dri2" [ 53.045] (II) LoadModule: "dri2" [ 53.045] (II) Module "dri2" already built-in [ 53.045] (--) NOUVEAU(0): Chipset: "NVIDIA NV43" [ 53.045] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 53.045] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 53.045] (==) NOUVEAU(0): RGB weight 888 [ 53.045] (==) NOUVEAU(0): Default visual is TrueColor [ 53.045] (==) NOUVEAU(0): Using HW cursor [ 53.045] (==) NOUVEAU(0): Allowed maximum DRI level 2. [ 53.045] (==) NOUVEAU(0): GLX sync to VBlank enabled. [ 53.045] (==) NOUVEAU(0): Page flipping enabled [ 53.045] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2] [ 53.045] (==) NOUVEAU(0): Page flipping synced to vblank by kernel. [ 53.045] (II) NOUVEAU(0): Initializing outputs ... [ 53.083] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 53.173] (II) NOUVEAU(0): Output LVDS-1 has no monitor section [ 53.239] (II) NOUVEAU(0): Output TV-1 has no monitor section [ 53.239] (II) NOUVEAU(0): 3 crtcs needed for screen. [ 53.239] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen. [ 53.239] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen. [ 53.283] (II) NOUVEAU(0): EDID for output VGA-1 [ 53.344] (II) NOUVEAU(0): EDID for output LVDS-1 [ 53.344] (II) NOUVEAU(0): Manufacturer: SEC Model: 3847 Serial#: 0 [ 53.344] (II) NOUVEAU(0): Year: 2006 Week: 0 [ 53.344] (II) NOUVEAU(0): EDID Version: 1.3 [ 53.344] (II) NOUVEAU(0): Digital Display Input [ 53.344] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23 [ 53.344] (II) NOUVEAU(0): Gamma: 2.20 [ 53.344] (II) NOUVEAU(0): No DPMS capabilities specified [ 53.344] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 53.344] (II) NOUVEAU(0): First detailed timing is preferred mode [ 53.344] (II) NOUVEAU(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 [ 53.344] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 [ 53.344] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 53.344] (II) NOUVEAU(0): Supported detailed timing: [ 53.344] (II) NOUVEAU(0): clock: 96.3 MHz Image Size: 367 x 230 mm [ 53.344] (II) NOUVEAU(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0 [ 53.344] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0 [ 53.344] (II) NOUVEAU(0): Unknown vendor-specific block f [ 53.344] (II) NOUVEAU(0): SAMSUNG [ 53.344] (II) NOUVEAU(0): LTN170X2-L02 [ 53.344] (II) NOUVEAU(0): EDID (in hex): [ 53.344] (II) NOUVEAU(0): 00ffffffffffff004ca3473800000000 [ 53.344] (II) NOUVEAU(0): 00100103802517780a87f594574f8c27 [ 53.344] (II) NOUVEAU(0): 27505400000001010101010101010101 [ 53.344] (II) NOUVEAU(0): 0101010101019f25a04051840c304020 [ 53.344] (II) NOUVEAU(0): 33006fe6100000190000000f00000000 [ 53.344] (II) NOUVEAU(0): 000000000078e6022300000000fe0053 [ 53.344] (II) NOUVEAU(0): 414d53554e470a2020202020000000fe [ 53.344] (II) NOUVEAU(0): 004c544e31373058322d4c30320a00f1 [ 53.344] (II) NOUVEAU(0): Printing probed modes for output LVDS-1 [ 53.344] (II) NOUVEAU(0): Modeline "1440x900"x60.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz eP) [ 53.344] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.77 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.53 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "800x600"x60.0 38.31 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "640x480"x59.9 23.98 640 664 720 800 480 483 487 500 -hsync +vsync (30.0 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "720x400"x60.0 22.41 720 744 808 896 400 403 413 417 -hsync +vsync (25.0 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.52 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz) [ 53.411] (II) NOUVEAU(0): EDID for output TV-1 [ 53.411] (II) NOUVEAU(0): Output VGA-1 disconnected [ 53.411] (II) NOUVEAU(0): Output LVDS-1 connected [ 53.411] (II) NOUVEAU(0): Output TV-1 disconnected [ 53.411] (II) NOUVEAU(0): Using exact sizes for initial modes [ 53.411] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1440x900 +0+0 [ 53.411] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0) [ 53.411] (II) NOUVEAU(0): Virtual size is 1440x900 (pitch 0) [ 53.411] (**) NOUVEAU(0): Driver mode "1440x900": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz [ 53.411] (II) NOUVEAU(0): Modeline "1440x900"x60.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz eP) [ 53.411] (**) NOUVEAU(0): Mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz [ 53.411] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.77 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz) [ 53.411] (**) NOUVEAU(0): Mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz [ 53.411] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.53 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 53.411] (**) NOUVEAU(0): Mode "800x600": 38.3 MHz (scaled from 0.0 MHz), 37.4 kHz, 60.0 Hz [ 53.411] (II) NOUVEAU(0): Modeline "800x600"x60.0 38.31 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 53.411] (**) NOUVEAU(0): Mode "640x480": 24.0 MHz (scaled from 0.0 MHz), 30.0 kHz, 59.9 Hz [ 53.411] (II) NOUVEAU(0): Modeline "640x480"x59.9 23.98 640 664 720 800 480 483 487 500 -hsync +vsync (30.0 kHz) [ 53.412] (**) NOUVEAU(0): Mode "720x400": 22.4 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz [ 53.412] (II) NOUVEAU(0): Modeline "720x400"x60.0 22.41 720 744 808 896 400 403 413 417 -hsync +vsync (25.0 kHz) [ 53.412] (**) NOUVEAU(0): Mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz [ 53.412] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz) [ 53.412] (**) NOUVEAU(0): Mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz [ 53.412] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.52 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz) [ 53.412] (==) NOUVEAU(0): DPI set to (96, 96) [ 53.412] (II) Loading sub module "fb" [ 53.412] (II) LoadModule: "fb" [ 53.412] (II) Loading /usr/lib/xorg/modules/libfb.so [ 53.414] (II) Module fb: vendor="X.Org Foundation" [ 53.414] compiled for 1.20.11, module version = 1.0.0 [ 53.414] ABI class: X.Org ANSI C Emulation, version 0.4 [ 53.414] (II) Loading sub module "shadowfb" [ 53.414] (II) LoadModule: "shadowfb" [ 53.415] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 53.419] (II) Module shadowfb: vendor="X.Org Foundation" [ 53.419] compiled for 1.20.11, module version = 1.0.0 [ 53.419] ABI class: X.Org ANSI C Emulation, version 0.4 [ 53.419] (II) UnloadModule: "modesetting" [ 53.419] (II) Unloading modesetting [ 53.419] (II) UnloadModule: "fbdev" [ 53.419] (II) Unloading fbdev [ 53.419] (II) UnloadSubModule: "fbdevhw" [ 53.419] (II) Unloading fbdevhw [ 53.419] (II) UnloadModule: "vesa" [ 53.419] (II) Unloading vesa [ 53.428] (II) NOUVEAU(0): Channel setup complete. [ 53.446] (II) NOUVEAU(0): Hardware support for Present enabled [ 53.446] (II) NOUVEAU(0): [DRI2] Setup complete [ 53.446] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 53.446] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau [ 53.446] (II) Loading sub module "exa" [ 53.446] (II) LoadModule: "exa" [ 53.446] (II) Loading /usr/lib/xorg/modules/libexa.so [ 53.447] (II) Module exa: vendor="X.Org Foundation" [ 53.447] compiled for 1.20.11, module version = 2.6.0 [ 53.447] ABI class: X.Org Video Driver, version 24.1 [ 53.447] (II) EXA(0): Driver allocated offscreen pixmaps [ 53.447] (II) EXA(0): Driver registered support for the following operations: [ 53.447] (II) Solid [ 53.447] (II) Copy [ 53.447] (II) Composite (RENDER acceleration) [ 53.447] (II) UploadToScreen [ 53.447] (II) DownloadFromScreen [ 53.447] (==) NOUVEAU(0): Backing store enabled [ 53.447] (==) NOUVEAU(0): Silken mouse enabled [ 53.447] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter. [ 53.447] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 53.447] (==) NOUVEAU(0): DPMS enabled [ 53.448] (II) Initializing extension Generic Event Extension [ 53.450] (II) Initializing extension SHAPE [ 53.451] (II) Initializing extension MIT-SHM [ 53.452] (II) Initializing extension XInputExtension [ 53.453] (II) Initializing extension XTEST [ 53.454] (II) Initializing extension BIG-REQUESTS [ 53.454] (II) Initializing extension SYNC [ 53.455] (II) Initializing extension XKEYBOARD [ 53.459] (II) Initializing extension XC-MISC [ 53.460] (II) Initializing extension SECURITY [ 53.460] (II) Initializing extension XFIXES [ 53.461] (II) Initializing extension RENDER [ 53.461] (II) Initializing extension RANDR [ 53.462] (II) Initializing extension COMPOSITE [ 53.463] (II) Initializing extension DAMAGE [ 53.466] (II) Initializing extension MIT-SCREEN-SAVER [ 53.466] (II) Initializing extension DOUBLE-BUFFER [ 53.467] (II) Initializing extension RECORD [ 53.467] (II) Initializing extension DPMS [ 53.468] (II) Initializing extension Present [ 53.468] (II) Initializing extension DRI3 [ 53.468] (II) Initializing extension X-Resource [ 53.469] (II) Initializing extension XVideo [ 53.469] (II) Initializing extension XVideo-MotionCompensation [ 53.470] (II) Initializing extension SELinux [ 53.470] (II) SELinux: Disabled on system [ 53.470] (II) Initializing extension GLX [ 54.873] (II) AIGLX: Loaded and initialized nouveau [ 54.873] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 54.873] (II) Initializing extension XFree86-VidModeExtension [ 54.874] (II) Initializing extension XFree86-DGA [ 54.875] (II) Initializing extension XFree86-DRI [ 54.875] (II) Initializing extension DRI2 [ 54.879] (II) NOUVEAU(0): NVEnterVT is called. [ 54.880] (II) NOUVEAU(0): Setting screen physical size to 380 x 238 [ 54.880] resize called 1440 900 [ 55.086] (II) config/udev: Adding input device Power Button (/dev/input/event6) [ 55.086] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 55.086] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 55.086] (II) LoadModule: "libinput" [ 55.087] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 55.124] (II) Module libinput: vendor="X.Org Foundation" [ 55.124] compiled for 1.20.8, module version = 0.30.0 [ 55.124] Module class: X.Org XInput Driver [ 55.124] ABI class: X.Org XInput driver, version 24.1 [ 55.124] (II) Using input driver 'libinput' for 'Power Button' [ 55.124] (**) Power Button: always reports core events [ 55.124] (**) Option "Device" "/dev/input/event6" [ 55.125] (**) Option "_source" "server/udev" [ 55.163] (II) event6 - Power Button: is tagged by udev as: Keyboard [ 55.164] (II) event6 - Power Button: device is a keyboard [ 55.164] (II) event6 - Power Button: device removed [ 55.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event6" [ 55.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 55.165] (**) Option "xkb_model" "pc105" [ 55.165] (**) Option "xkb_layout" "de,us" [ 55.165] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 55.241] (II) event6 - Power Button: is tagged by udev as: Keyboard [ 55.242] (II) event6 - Power Button: device is a keyboard [ 55.244] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 55.244] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 55.244] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 55.244] (II) Using input driver 'libinput' for 'Video Bus' [ 55.244] (**) Video Bus: always reports core events [ 55.244] (**) Option "Device" "/dev/input/event7" [ 55.244] (**) Option "_source" "server/udev" [ 55.248] (II) event7 - Video Bus: is tagged by udev as: Keyboard [ 55.248] (II) event7 - Video Bus: device is a keyboard [ 55.249] (II) event7 - Video Bus: device removed [ 55.249] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event7" [ 55.249] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 55.249] (**) Option "xkb_model" "pc105" [ 55.249] (**) Option "xkb_layout" "de,us" [ 55.249] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 55.253] (II) event7 - Video Bus: is tagged by udev as: Keyboard [ 55.254] (II) event7 - Video Bus: device is a keyboard [ 55.255] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 55.256] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 55.256] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 55.256] (II) Using input driver 'libinput' for 'Video Bus' [ 55.256] (**) Video Bus: always reports core events [ 55.256] (**) Option "Device" "/dev/input/event4" [ 55.256] (**) Option "_source" "server/udev" [ 55.260] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 55.260] (II) event4 - Video Bus: device is a keyboard [ 55.260] (II) event4 - Video Bus: device removed [ 55.260] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event4" [ 55.261] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 55.261] (**) Option "xkb_model" "pc105" [ 55.261] (**) Option "xkb_layout" "de,us" [ 55.261] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 55.266] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 55.266] (II) event4 - Video Bus: device is a keyboard [ 55.268] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 55.268] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 55.268] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 55.268] (II) Using input driver 'libinput' for 'Power Button' [ 55.268] (**) Power Button: always reports core events [ 55.268] (**) Option "Device" "/dev/input/event5" [ 55.268] (**) Option "_source" "server/udev" [ 55.271] (II) event5 - Power Button: is tagged by udev as: Keyboard [ 55.272] (II) event5 - Power Button: device is a keyboard [ 55.272] (II) event5 - Power Button: device removed [ 55.272] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event5" [ 55.272] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 55.272] (**) Option "xkb_model" "pc105" [ 55.272] (**) Option "xkb_layout" "de,us" [ 55.272] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 55.277] (II) event5 - Power Button: is tagged by udev as: Keyboard [ 55.277] (II) event5 - Power Button: device is a keyboard [ 55.279] (II) config/udev: Adding input device Lid Switch (/dev/input/event3) [ 55.279] (II) No input driver specified, ignoring this device. [ 55.279] (II) This device may have been added with another device file. [ 55.281] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8) [ 55.281] (II) No input driver specified, ignoring this device. [ 55.281] (II) This device may have been added with another device file. [ 55.282] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event9) [ 55.282] (II) No input driver specified, ignoring this device. [ 55.282] (II) This device may have been added with another device file. [ 55.283] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event10) [ 55.283] (II) No input driver specified, ignoring this device. [ 55.283] (II) This device may have been added with another device file. [ 55.284] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event11) [ 55.284] (II) No input driver specified, ignoring this device. [ 55.285] (II) This device may have been added with another device file. [ 55.286] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event12) [ 55.286] (II) No input driver specified, ignoring this device. [ 55.286] (II) This device may have been added with another device file. [ 55.287] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event13) [ 55.287] (II) No input driver specified, ignoring this device. [ 55.287] (II) This device may have been added with another device file. [ 55.288] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event14) [ 55.288] (II) No input driver specified, ignoring this device. [ 55.288] (II) This device may have been added with another device file. [ 55.289] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event15) [ 55.289] (II) No input driver specified, ignoring this device. [ 55.289] (II) This device may have been added with another device file. [ 55.291] (II) config/udev: Adding input device Gaming Mouse (/dev/input/event1) [ 55.291] (**) Gaming Mouse: Applying InputClass "evdev pointer catchall" [ 55.291] (**) Gaming Mouse: Applying InputClass "libinput pointer catchall" [ 55.291] (II) Using input driver 'libinput' for 'Gaming Mouse' [ 55.291] (**) Gaming Mouse: always reports core events [ 55.291] (**) Option "Device" "/dev/input/event1" [ 55.291] (**) Option "_source" "server/udev" [ 55.355] (II) event1 - Gaming Mouse: is tagged by udev as: Mouse [ 55.355] (II) event1 - Gaming Mouse: device is a pointer [ 55.356] (II) event1 - Gaming Mouse: device removed [ 55.358] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:093A:2533.0001/input/input2/event1" [ 55.358] (II) XINPUT: Adding extended input device "Gaming Mouse" (type: MOUSE, id 10) [ 55.359] (**) Option "AccelerationScheme" "none" [ 55.359] (**) Gaming Mouse: (accel) selected scheme none/0 [ 55.359] (**) Gaming Mouse: (accel) acceleration factor: 2.000 [ 55.359] (**) Gaming Mouse: (accel) acceleration threshold: 4 [ 55.423] (II) event1 - Gaming Mouse: is tagged by udev as: Mouse [ 55.423] (II) event1 - Gaming Mouse: device is a pointer [ 55.425] (II) config/udev: Adding input device Gaming Mouse (/dev/input/mouse0) [ 55.425] (II) No input driver specified, ignoring this device. [ 55.425] (II) This device may have been added with another device file. [ 55.427] (II) config/udev: Adding input device Gaming Mouse Keyboard (/dev/input/event2) [ 55.427] (**) Gaming Mouse Keyboard: Applying InputClass "evdev keyboard catchall" [ 55.427] (**) Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall" [ 55.427] (II) Using input driver 'libinput' for 'Gaming Mouse Keyboard' [ 55.428] (**) Gaming Mouse Keyboard: always reports core events [ 55.428] (**) Option "Device" "/dev/input/event2" [ 55.428] (**) Option "_source" "server/udev" [ 55.432] (II) event2 - Gaming Mouse Keyboard: is tagged by udev as: Keyboard [ 55.433] (II) event2 - Gaming Mouse Keyboard: device is a keyboard [ 55.433] (II) event2 - Gaming Mouse Keyboard: device removed [ 55.434] (II) libinput: Gaming Mouse Keyboard: needs a virtual subdevice [ 55.434] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:093A:2533.0002/input/input4/event2" [ 55.434] (II) XINPUT: Adding extended input device "Gaming Mouse Keyboard" (type: MOUSE, id 11) [ 55.434] (**) Option "AccelerationScheme" "none" [ 55.434] (**) Gaming Mouse Keyboard: (accel) selected scheme none/0 [ 55.434] (**) Gaming Mouse Keyboard: (accel) acceleration factor: 2.000 [ 55.434] (**) Gaming Mouse Keyboard: (accel) acceleration threshold: 4 [ 55.439] (II) event2 - Gaming Mouse Keyboard: is tagged by udev as: Keyboard [ 55.439] (II) event2 - Gaming Mouse Keyboard: device is a keyboard [ 55.441] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 55.441] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 55.441] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 55.441] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 55.441] (**) AT Translated Set 2 keyboard: always reports core events [ 55.441] (**) Option "Device" "/dev/input/event0" [ 55.442] (**) Option "_source" "server/udev" [ 55.445] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 55.445] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 55.448] (II) event0 - AT Translated Set 2 keyboard: device removed [ 55.448] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 55.448] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 55.448] (**) Option "xkb_model" "pc105" [ 55.448] (**) Option "xkb_layout" "de,us" [ 55.448] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 55.452] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 55.453] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 55.456] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16) [ 55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall" [ 55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 55.457] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 55.457] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad" [ 55.457] (II) LoadModule: "synaptics" [ 55.458] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 55.461] (II) Module synaptics: vendor="X.Org Foundation" [ 55.461] compiled for 1.20.8, module version = 1.9.1 [ 55.461] Module class: X.Org XInput Driver [ 55.461] ABI class: X.Org XInput driver, version 24.1 [ 55.461] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 55.461] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 55.461] (**) Option "Device" "/dev/input/event16" [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 62) [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 113) [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 55.462] (**) Option "VertEdgeScroll" "1" [ 55.462] (**) Option "CornerCoasting" "1" [ 55.462] (**) Option "VertTwoFingerScroll" "1" [ 55.462] (**) Option "HorizTwoFingerScroll" "1" [ 55.462] (**) Option "RBCornerButton" "9" [ 55.462] (**) Option "LBCornerButton" "8" [ 55.462] (**) Option "TapButton1" "1" [ 55.462] (**) Option "TapButton2" "2" [ 55.462] (**) Option "TapButton3" "3" [ 55.463] (**) Option "CircularScrolling" "1" [ 55.463] (**) Option "CircScrollTrigger" "7" [ 55.463] (**) Option "MinSpeed" "0.5" [ 55.463] (**) Option "MaxSpeed" "1.0" [ 55.463] (**) Option "AccelFactor" "0.075" [ 55.463] (**) Option "CoastingSpeed" "8" [ 55.463] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 55.463] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 55.463] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input18/event16" [ 55.463] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13) [ 55.463] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.0 [ 55.463] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 2.00 [ 55.464] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.075 [ 55.464] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 55.465] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 55.466] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 55.466] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 55.481] (**) Gaming Mouse Keyboard: Applying InputClass "evdev keyboard catchall" [ 55.481] (**) Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall" [ 55.481] (II) Using input driver 'libinput' for 'Gaming Mouse Keyboard' [ 55.481] (**) Gaming Mouse Keyboard: always reports core events [ 55.481] (**) Option "Device" "/dev/input/event2" [ 55.481] (**) Option "_source" "_driver/libinput" [ 55.481] (II) libinput: Gaming Mouse Keyboard: is a virtual subdevice [ 55.481] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:093A:2533.0002/input/input4/event2" [ 55.481] (II) XINPUT: Adding extended input device "Gaming Mouse Keyboard" (type: KEYBOARD, id 14) [ 55.481] (**) Option "xkb_model" "pc105" [ 55.481] (**) Option "xkb_layout" "de,us" [ 55.481] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 60.812] (II) NOUVEAU(0): EDID vendor "SEC", prod id 14407 [ 60.812] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 60.812] (II) NOUVEAU(0): Modeline "1440x900"x0.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz eP) [ 61.020] (II) NOUVEAU(0): EDID vendor "SEC", prod id 14407 [ 61.020] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 61.020] (II) NOUVEAU(0): Modeline "1440x900"x0.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz eP)So, maybe this piece of information contains some hints how to fix the issue on 5.10 antiX kernel, or what other options exist? Would rather like to run an antiX kernel than this debian one…
Regards
RobinWindows is like a submarine. Open a window and serious problems will start.
In reply to: testing 5.10 kernel
I had promised to test your 5.10.142 kernel on this 32 bit notebook. So here I’m with the results. The kernel boots very fast, but it wouldn’t start X, asking for console login instead. Here are the logs and dmesg output (attached) I’ve saved immediately after startup. Maybe you can make something of it.
(inxi -zv8)
System: Kernel: 5.10.142-antix.2-686-smp-pae i686 bits: 32 compiler: gcc v: 10.2.1 parameters: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all Desktop: IceWM 2.9.4 vt: 7 dm: N/A Distro: antiX-21_386-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: <filter> Chassis: No Enclosure type: 1 serial: <filter> Mobo: Notebook model: RIM2000 serial: <filter> BIOS: Phoenix v: RIM00F0A date: 05/27/2005 Battery: ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) volts: 16.6 min: 14.8 model: ARIMA LI4403A type: Unknown serial: <filter> status: Full Memory: RAM: total: 1.96 GiB used: 858.2 MiB (42.7%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Info: Single Core model: Intel Pentium M bits: 32 type: MCP arch: M Dothan family: 6 model-id: D (13) stepping: 8 microcode: 20 cache: L2: 2 MiB bogomips: 3457 Speed: 800 MHz min/max: 800/1733 MHz Core speed (MHz): 1: 800 Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae pbe pge pse pti sep ss sse sse2 tm tm2 tsc vme Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported Type: l1tf mitigation: PTE Inversion Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled Type: meltdown mitigation: PTI Type: mmio_stale_data status: Unknown: No mitigations Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: N/A alternate: nvidiafb, nouveau bus-ID: 01:00.0 chip-ID: 10de:0148 class-ID: 0300 Display: x11 server: X.Org 1.20.11 driver: loaded: nouveau,vesa unloaded: fbdev,modesetting alternate: nv display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 271x203mm (10.7x8.0") s-diag: 339mm (13.3") Monitor-1: default res: 1024x768 OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1 direct render: Yes Audio: Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403 Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation driver: saa7134 v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480 Sound Server-1: ALSA v: k5.10.142-antix.2-686-smp-pae running: yes Network: Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 port: 2000 bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq modules: wl port: 2000 bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280 IF: eth1 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 151.75 GiB used: 85.38 GiB (56.3%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A size: 93.16 GiB block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 3.02 scheme: MBR ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 8.01 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) used: 13.6 GiB (23.6%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb uuid: 862f493d-6951-444f-a3f6-734244b241e7 ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 5.4 MiB (11.1%) fs: vfat dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) used: 34.65 GiB (83.2%) fs: ext3 dev: /dev/sda7 maj-min: 8:7 label: /daten3 uuid: c1bc867a-ec28-436d-831b-e47f334471ce ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) fs: ext3 dev: /dev/sda8 maj-min: 8:8 label: /daten4 uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) fs: ext3 dev: /dev/sda5 maj-min: 8:5 label: /home uuid: 94021be3-c160-4166-a151-92ad72b26f9a ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 7.95 GiB (81.6%) fs: ext4 dev: /dev/sda6 maj-min: 8:6 label: antiX uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 4.3 GiB (55.2%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal uuid: 19eaea0e-493b-4007-8eff-f14aca40363f ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) fs: ext4 dev: /dev/sda10 maj-min: 8:10 label: N/A uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 2.16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda9 maj-min: 8:9 label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: <superuser required> label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 serial: <filter> Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 2-1:2 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 093a:2533 class-ID: 0300 Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Sensors: Message: No sensor data found. Is lm-sensors configured? Repos: Packages: apt: 1819 lib: 879 Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http: //ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http: //ftp.de.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http: //ftp.de.debian.org/debian/ bullseye main contrib non-free 2: deb http: //security.debian.org/ bullseye-security main contrib non-free No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 of 130 1: cpu: 31.4% command: firefox-esr pid: 6428 mem: 159.9 MiB (7.9%) 2: cpu: 24.0% command: firefox-esr pid: 6235 mem: 363.9 MiB (18.1%) 3: cpu: 13.0% command: yad pid: 7556 mem: 24.1 MiB (1.2%) 4: cpu: 4.7% command: xorg pid: 3738 mem: 71.5 MiB (3.5%) 5: cpu: 4.7% command: gtkdialog pid: 7523 mem: 23.8 MiB (1.1%) Memory top: 5 of 130 1: mem: 363.9 MiB (18.1%) command: firefox-esr pid: 6235 cpu: 24.0% 2: mem: 159.9 MiB (7.9%) command: firefox-esr pid: 6428 cpu: 31.4% 3: mem: 115.4 MiB (5.7%) command: firefox-esr pid: 6374 cpu: 1.3% 4: mem: 77.9 MiB (3.8%) command: firefox-esr pid: 6313 cpu: 0.1% 5: mem: 71.5 MiB (3.5%) command: xorg pid: 3738 cpu: 4.7% Info: Processes: 130 Uptime: 18m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06(initrd.log)
Run custom code before reading boot codes: /live/custom/antiX/0.sh Translate to de Schrift aufLat15-VGA16 setzen setfont /live/locale/fonts/Lat15-VGA16.psf -C /dev/console Neue Bildschirmbreite 80 @ 1.59 starting tsplash === initrd bootstrap ================================================== initrd init started at 0.23 seconds Willkommen bei antiX 21 (Grup Yorum) 32-bit pae! BusyBox v1.31.1 (2021-02-03 15:54:12 MST) multi-call binary. ntfs-3g 2017.3.23AR.3 integrated FUSE 28 initrd version: 8.30.14-x08 initrd built: Fri, 04 Jun 2021 11:43:21 +0000 Total Memory: 2009 M Used Memory: 37 M Linux kernel: 5.10.142-antix.2-686-smp-pae Screen width: 80 Kernel arch: i686 Hardware: Notebook RIM2000 Augenblickliche Bootparameter: lang=de_DE tz=Europe/Berlin quiet splasht disable=lxF mount=all xorg=nouveau overlay gefunden Lade Hardware spezifische Module ... Prüfe usb,cd Geräte. Suche nach boot Datei(en) antiX/linuxfs Herausgefilterte Geräte /dev/sr0 Versuch wiederholen für 15 Sekunden . Neue(s) Gerät(e) /dev/sdb2 /dev/sdb1 /dev/sdb /dev/sr0 gefunden mount -t vfat -o umask=000,dmask=002,fmask=113,shortname=winnt,uid=1000,gid=1000 /dev/sdb2 /live/boot-dev mount -t ext4 -o ro,noatime /dev/sdb1 /live/boot-dev Eingehängtes boot Gerät. Gerät /dev/sdb1 eingehängt auf /live/boot-dev boot Gerät Dateisystem: ext4 boot device model: Flash Disk Spent 1.63 seconds looking for boot file(s) antiX/linuxfs loop times: 0.25 boot device uuid: 862f493d-6951-444f-a3f6-734244b241e7 BOOT_MP: /live/boot-dev SQFILE_DEV: /dev/sdb1 SQFILE_MP /live/boot-dev Starte Generator für Zufallsnummern... Speichere zufälligen seed Mount file /live/boot-dev/antiX/linuxfs at /live/linux mount -t squashfs -o loop,ro /live/boot-dev/antiX/linuxfs /live/linux sqfs_vid: ==== a246bdfb23d4f341469b4de1b42f134d LD_PATH: /live/linux/lib:/live/linux/lib/i386-linux-gnu:/live/linux/usr/lib Loaded 13 module(s) nls_utf8 nls_cp437 uas usb_storage hid_generic uhci_hcd firewire_ohci firewire_core dm_crypt dm_mod overlay battery fotg210_hcd precheck filesystem on /dev/sdb1 Erstellen aufs ram tmpfs bei /live/aufs-ram (1577 MB) /bin/mount -t tmpfs -o size=1577m,noatime tmpfs /live/aufs-ram Mount overlayfs at /live/aufs mount -t overlay overlay -o lowerdir=/live/linux,upperdir=/live/aufs-ram/upper,workdir=/live/aufs-ram/work /live/aufs Load microcode Found one video display device Erstellen /media tmpfs bei /live/aufs/media (10 MB) /bin/mount -t tmpfs -o size=10m,noatime tmpfs /live/aufs/media Erstellen /run tmpfs bei /live/aufs/run (1111 MB) /bin/mount -t tmpfs -o size=1111m,mode=755,nodev,noatime tmpfs /live/aufs/run Erstellen /live tmpfs bei /live/aufs/live (100 MB) /bin/mount -t tmpfs -o size=100m,mode=755,noatime tmpfs /live/aufs/live Run custom code before: /live/custom/antiX/0.sh mount --move /live/aufs-ram /live/aufs/live/aufs-ram mount --move /live/boot-dev /live/aufs/live/boot-dev mount --move /live/linux /live/aufs/live/linux Run custom code after: /live/custom/antiX/0.sh Run custom code before running live init.d scripts: /live/custom/antiX/8.sh Das initrd init Programm brauchte 16.41 Sekunden ====================================================================== cp /live/config/tsplash/progress /live/aufs/live/config/tsplash/progress cp /live/config/tsplash/tsplash.log /live/aufs/live/config/tsplash/tsplash.log(live-init.log)
Thu Oct 27 07:18:26 CEST 2022 /live/etc/init.d/live-usb-save live-usb-save: Restore state information Restore machine specific state file /etc/udev/rules.d/70-persistent-net.rules Restore machine specific state file /var/lib/connman/wifi_0012f006fa18_574b3233_managed_psk/settings Restore general state file /etc/fstab.mount Restore general state file /var/log/live/persist-save.log Thu Oct 27 07:18:26 CEST 2022 /live/etc/init.d/live-L10n live-L10n: Lokalisierung der Konsole und Zeitzone Einstellung der Zeitzone und der Ortszeit auf Europe/Berlin Einstellung des Gebietsschema auf de_DE.UTF-8 Thu Oct 27 07:18:27 CEST 2022 /live/etc/init.d/live-init live-init: Lokalisierung/Konfiguration X-Window Microcode laden Alle Geräte werden gemountet make-fstab: Remove all dynamic entries from /etc/fstab make-fstab: Create new /etc/fstab make-fstab: Automount /dev/sda1 at /media/antiX-Frugal make-fstab: Automount /dev/sda5 at /media/_home make-fstab: Automount /dev/sda6 at /media/antiX make-fstab: Automount /dev/sda7 at /media/_daten3 make-fstab: Automount /dev/sda8 at /media/_daten4 make-fstab: Automount /dev/sda10 at /media/sda10 make-fstab: Automount /dev/sdb2 at /media/ANTIX-UEFI make-fstab: Put 9 hard drive entries into /etc/fstab make-fstab: Put 1 removable entry into /etc/fstab Repository-Lokalisierung auf Europe/Berlin Menü-Lokalisierung auf /live/etc/init.d/live-init in /etc/skel Einstellung xkb-layout auf de,us Einstellung xkb-model auf pc105 Einstellung xkb-variant auf Einstellung xkb-options auf grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll CONSOLE KEYMAP: /etc/default/keyboard Nach Hardware-spezifischen Video-Module wird gescannt... KMS Video-Modul(e) gefunden nouveau Datei /etc/X11/xorg.conf wird mit nouveau konfiguriert Standardbenutzer demo gefunden Thu Oct 27 07:18:35 CEST 2022 /live/etc/init.d/live-disable-services live-disable-services: Customizing services Disabling some services (L, lean) Disabling more services (X, Xtralean)(Xorg.0.log))
[ 32.991] X.Org X Server 1.20.11 X Protocol Version 11, Revision 0 [ 32.991] Build Operating System: linux Debian [ 32.991] Current Operating System: Linux antix1 5.10.142-antix.2-686-smp-pae #1 SMP Sat Sep 10 19:09:21 EEST 2022 i686 [ 32.991] Kernel command line: lang=de_DE tz=Europe/Berlin quiet splasht disable=lxF mount=all xorg=nouveau [ 32.991] Build Date: 10 November 2021 11:00:13AM [ 32.991] xorg-server 2:1.20.11-1.0nosystemd1 (https://www.debian.org/support) [ 32.991] Current version of pixman: 0.40.0 [ 32.991] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 32.991] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 32.994] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 07:18:55 2022 [ 33.004] (==) Using config file: "/etc/X11/xorg.conf" [ 33.004] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 33.004] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 33.019] (==) No Layout section. Using the first Screen section. [ 33.019] (==) No screen section available. Using defaults. [ 33.019] (**) |-->Screen "Default Screen Section" (0) [ 33.019] (**) | |-->Monitor "<default monitor>" [ 33.022] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 33.022] (**) | |-->Device "Device0" [ 33.022] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 33.022] (==) Automatically adding devices [ 33.022] (==) Automatically enabling devices [ 33.022] (==) Automatically adding GPU devices [ 33.022] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 33.042] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 33.042] Entry deleted from font path. [ 33.044] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 33.044] Entry deleted from font path. [ 33.044] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 33.044] Entry deleted from font path. [ 33.044] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 33.044] (==) ModulePath set to "/usr/lib/xorg/modules" [ 33.044] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 33.044] (II) Loader magic: 0x70a700 [ 33.044] (II) Module ABI versions: [ 33.044] X.Org ANSI C Emulation: 0.4 [ 33.044] X.Org Video Driver: 24.1 [ 33.044] X.Org XInput driver : 24.1 [ 33.044] X.Org Server Extension : 10.0 [ 33.098] (--) PCI:*(1@0:0:0) 10de:0148:161f:203d rev 162, Mem @ 0xa0000000/67108864, 0xc0000000/134217728, 0x90000000/16777216, BIOS @ 0x????????/131072 [ 33.098] (II) LoadModule: "glx" [ 33.131] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 33.243] (II) Module glx: vendor="X.Org Foundation" [ 33.243] compiled for 1.20.11, module version = 1.0.0 [ 33.243] ABI class: X.Org Server Extension, version 10.0 [ 33.243] (II) LoadModule: "nouveau" [ 33.248] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 33.285] (II) Module nouveau: vendor="X.Org Foundation" [ 33.285] compiled for 1.20.10, module version = 1.0.17 [ 33.285] Module class: X.Org Video Driver [ 33.285] ABI class: X.Org Video Driver, version 24.1 [ 33.285] (II) NOUVEAU driver Date: Sat Jan 23 12:24:42 2021 -0500 [ 33.285] (II) NOUVEAU driver for NVIDIA chipset families : [ 33.285] RIVA TNT (NV04) [ 33.285] RIVA TNT2 (NV05) [ 33.285] GeForce 256 (NV10) [ 33.285] GeForce 2 (NV11, NV15) [ 33.285] GeForce 4MX (NV17, NV18) [ 33.285] GeForce 3 (NV20) [ 33.285] GeForce 4Ti (NV25, NV28) [ 33.288] GeForce FX (NV3x) [ 33.288] GeForce 6 (NV4x) [ 33.288] GeForce 7 (G7x) [ 33.289] GeForce 8 (G8x) [ 33.289] GeForce 9 (G9x) [ 33.289] GeForce GTX 2xx/3xx (GT2xx) [ 33.289] GeForce GTX 4xx/5xx (GFxxx) [ 33.289] GeForce GTX 6xx/7xx (GKxxx) [ 33.289] GeForce GTX 9xx (GMxxx) [ 33.289] GeForce GTX 10xx (GPxxx) [ 33.289] (++) using VT number 7 [ 33.445] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -19 [ 33.446] (EE) No devices detected. [ 33.446] (EE) Fatal server error: [ 33.446] (EE) no screens found(EE) [ 33.446] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 33.446] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 33.446] (EE) [ 33.448] (EE) Server terminated with error (1). Closing log file.(slimski.log)
envlang received as: de_DE slimski: waiting for X server to begin accepting connections Giving up. slimski: unable to connect to X serverSo I’m back to 4.9.0-326-antix.1-686-smp-pae, which works great in antiX 21 test USB-stick, and for everyday usage I’m still on antiX 19 using 4.19.0-256-antix.1-686-smp-pae with old nvidia proprietary drivers, allowing way better graphics performance on this device than nouveau still.
Regards
RobinWindows is like a submarine. Open a window and serious problems will start.
In reply to: What are you “here” with today?
Brian Masinick
I experimented with ISO snapshot and remastering today on Live USB.
When I created an ISO snapshot, it worked fine. However, if I then attempted to remaster that specific USB containing the ISO snapshot, it would boot and I’d see the booting display messages, but when the system started the graphical user interface, I’d see a blinking cursor just as it started, then the cursor went away and everything was blank for as long as I’d wait; however my usual disk images and my working USB images boot immediately, so for some reason there is a problem with the graphical boot parameters for the remastered ISO snapshot.
Back with the antiX version from which I built the successful ISO image; after rerunning Live USB Maker to recreate a working ISO snapshot.
Here’s the latest configuration:
pinxi -zv4 System: Kernel: 6.0.3-x64v2-xanmod1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 Desktop: IceWM v: 3.1.0 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) volts: 12.7 min: 11.3 model: HP Primary status: not charging CPU: Info: 6-core model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64 type: MT MCP arch: Zen 2 rev: 1 cache: L1: 384 KiB L2: 3 MiB L3: 8 MiB Speed (MHz): avg: 4056 min/max: 400/4056 boost: enabled cores: 1: 4056 2: 4056 3: 4056 4: 4056 5: 4056 6: 4056 7: 4056 8: 4056 9: 4056 10: 4056 11: 4056 12: 4056 bogomips: 50303 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm Graphics: Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5.1 bus-ID: 03:00.0 temp: 37.0 C Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo bus-ID: 1-3:3 Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu resolution: 1920x1080~60Hz API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.48.0 6.0.3-x64v2-xanmod1 LLVM 11.0.1) direct render: Yes Network: Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel port: f000 bus-ID: 01:00.0 IF: wlan0 state: up mac: <filter> Drives: Local Storage: total: 238.47 GiB used: 27.1 GiB (11.4%) ID-1: /dev/nvme0n1 vendor: Toshiba model: KBG40ZNV256G KIOXIA size: 238.47 GiB temp: 28.9 C Partition: ID-1: / size: 47.76 GiB used: 27.03 GiB (56.6%) fs: ext4 dev: /dev/nvme0n1p3 ID-2: /boot/efi size: 256 MiB used: 72.8 MiB (28.5%) fs: vfat dev: /dev/nvme0n1p1 ID-3: swap-1 size: 7.81 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/nvme0n1p6 Info: Processes: 276 Uptime: 3m Memory: 7.1 GiB used: 606.6 MiB (8.3%) Init: runit runlevel: 2 Compilers: gcc: 10.2.1 Packages: 1675 Shell: Bash v: 5.1.4 pinxi: 3.3.22-12--
Brian MasinickIn reply to: Flash disc issue
andfree
Many thanks for the reply.
0) Are the contacts clean?
I can’t see them. I blew to them, but it didn’t help.
1) Does the flash-disc work in other PCs/OSes?
The person that gave it to me said that it didn’t work in his mac OS. I tried it in windows, and infinite windows, one after another, opened with this message:
You need to format the disk in drive E: before you can use it. Do you want to format it now?2) If it is formatted, what is the partition filesystem (ext4, ntfs, …)?
I don’t see how to check it.
3) If you insert it, you may post output of ‘lsblk’ and (relevant part of ‘sudo dmesg | tail -50’ that mentions the new device added)
$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 93.2G 0 disk ├─sda1 8:1 0 91.7G 0 part / └─sda2 8:2 0 1.5G 0 part [SWAP] sdb 8:16 1 117.2G 0 disk sr0 11:0 1 1024M 0 rom $ sudo dmesg | tail -50 [ 6355.532967] sd 2:0:0:0: [sdb] tag#0 Add. Sense: Medium not present [ 6355.532972] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 6355.532975] blk_update_request: I/O error, dev sdb, sector 0 [ 6355.532984] Buffer I/O error on dev sdb, logical block 0, async page read [ 6355.534335] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6355.534342] sd 2:0:0:0: [sdb] tag#0 Sense Key : Not Ready [current] [ 6355.534347] sd 2:0:0:0: [sdb] tag#0 Add. Sense: Medium not present [ 6355.534351] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 6355.534355] blk_update_request: I/O error, dev sdb, sector 0 [ 6355.534364] Buffer I/O error on dev sdb, logical block 0, async page read [ 6355.535710] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6355.535717] sd 2:0:0:0: [sdb] tag#0 Sense Key : Not Ready [current] [ 6355.535722] sd 2:0:0:0: [sdb] tag#0 Add. Sense: Medium not present [ 6355.535726] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 6355.535730] blk_update_request: I/O error, dev sdb, sector 0 [ 6355.535739] Buffer I/O error on dev sdb, logical block 0, async page read [ 6355.536951] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6355.536957] sd 2:0:0:0: [sdb] tag#0 Sense Key : Not Ready [current] [ 6355.536962] sd 2:0:0:0: [sdb] tag#0 Add. Sense: Medium not present [ 6355.536967] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 6355.536970] blk_update_request: I/O error, dev sdb, sector 0 [ 6355.536978] Buffer I/O error on dev sdb, logical block 0, async page read [ 6355.538202] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6355.538208] sd 2:0:0:0: [sdb] tag#0 Sense Key : Not Ready [current] [ 6355.538212] sd 2:0:0:0: [sdb] tag#0 Add. Sense: Medium not present [ 6355.538217] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 6355.538220] blk_update_request: I/O error, dev sdb, sector 0 [ 6355.538229] Buffer I/O error on dev sdb, logical block 0, async page read [ 6355.539589] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6355.539596] sd 2:0:0:0: [sdb] tag#0 Sense Key : Not Ready [current] [ 6355.539601] sd 2:0:0:0: [sdb] tag#0 Add. Sense: Medium not present [ 6355.539605] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 6355.539609] blk_update_request: I/O error, dev sdb, sector 0 [ 6355.539616] Buffer I/O error on dev sdb, logical block 0, async page read [ 6355.539642] ldm_validate_partition_table(): Disk read failed. [ 6355.540955] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6355.540962] sd 2:0:0:0: [sdb] tag#0 Sense Key : Not Ready [current] [ 6355.540966] sd 2:0:0:0: [sdb] tag#0 Add. Sense: Medium not present [ 6355.540971] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 6355.540974] blk_update_request: I/O error, dev sdb, sector 0 [ 6355.540982] Buffer I/O error on dev sdb, logical block 0, async page read [ 6355.542329] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6355.542336] sd 2:0:0:0: [sdb] tag#0 Sense Key : Not Ready [current] [ 6355.542340] sd 2:0:0:0: [sdb] tag#0 Add. Sense: Medium not present [ 6355.542345] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 6355.542348] blk_update_request: I/O error, dev sdb, sector 0 [ 6355.542357] Buffer I/O error on dev sdb, logical block 0, async page read [ 6355.544724] Dev sdb: unable to read RDB block 0 [ 6355.549846] sdb: unable to read partition table [ 6355.552738] sd 2:0:0:0: [sdb] Attached SCSI removable diskThe step 2)+3) should help to devise an explicit mount command, such as ‘sudo mount [-t ntfs] /dev/sd[b-z] <target folder>’, and see whether its output provides more/useful information other than the error code.
Does the output above help us to specify that command?
Thanks, again.
- This reply was modified 6 months, 2 weeks ago by andfree.
Hello mh4speech
At least I have never seen an existing sdX SCSI device name assignment getting swapped on antiX when plugging an additional device. The devices get their naming strictly by order of plugging, so the freshly plugged device will always get the next available sdX assignment.
This means, the device you’ve overwritten and the device you wanted to write to must have been unplugged or replugged after you’ve looked up its name and before applying the dd command on it.
You should find proof about what actually has happened in your dmesg output (or possibly system logs if existing) from these events.
As you probably know: The devices are named simply by their detection order in linux. So e.g. during boot it is enough to have some arbitrary response speed differences of two identical drives to swap their device names on each reboot.
But generally you should know (and what dolphin oracle already had clearly stated) that sdX SCSI device names are subject of change, not expected to be consistent between reboots (“next day…”). They are to be considered not even consistent across adding and removal of devices during the recent uptime.
So, something must have happened betwen the very instant of time you’ve been looking up the name, and the instant you’ve been overwriting it. Only you can know what it was, and if not, you could have looked it up in dmesg at least after the incident (Possibly a faulty controller has reset the connection to the drives completely for some reason, forcing a full reassignement of devices). Without this dmesg output nobody can tell you positively what has happened, since you state you’ve looked up the drive assignment immediately before dding.
Again, I’ve never seen such a thing happen on antiX. For me not only internal classical devices keep their assignement once they are assigned on boot, but this is true also for hotplugged USB devices once they were assigned in a session. They keep their assignment in antX, until they are unplugged, and only on replugging they might get a different assignment, when something else has been plugged or removed in between.
Meaning: If you have two USB devices, and you unplug them and replug them in reversed order as you’ve observed originally, this will result in reversed device letter assignment for these two devices, but not affect any other assigned device names. For example, let’s assume you have sda as unpluggable internal hard drive present, and have hotplugged USB devices sdb, sdc, sdd and sde. Then after removing sdc you will see in lsblk the drives sda, sdb, sdd and sde have kept their assignment, while no sdc device is present. Whatever device you hotplug next will get assigned to sdc, and then again the next one to sdf if all other device names below are used already the moment when it is plugged.
In short words: Without having looked up the output of
dmesg mount lsblk lsusb sudo inxi -zFdLpv8immediately after, you will not find out what has actually caused your accident.
Concerning data recovery: dd has overwritten the original data structure immediately, so probably there will not be a recovery for the overlapping areas. Data recovery in general on the modern file systems is way more complicated than you might expect and how and whether you succeed depends also on the type of file system in use. Maybe you could give fixparts tool a try. You’ll find recent .deb installer packages on its download site.
Good luck
RobinWindows is like a submarine. Open a window and serious problems will start.
Topic: antiX-22 nvidia 340xx driver
Excuse me for my English knowing 🙂 i don’t quit trust a googols
…
At this time I’m use antiX22_x64_base.
VCard is Nvidia GeForce GT 210
Monitor is 920×1080 enough it’s uncomfortable 1440×900Install from AntiX-CC said Uh oh.))
… like thisroot@zz:~# nvidia-detect-mx Latest = 460.73.01 Detected NVIDIA GPUs: 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) Checking card: NVIDIA Corporation GT218 [GeForce 210] (rev a2) Uh oh. Your card is not supported by any driver version up to 460.73.01. A newer driver may add support for your card. Newer driver releases may be available in the MX testing repository or jessie-backports.Then I did that.
root@zz:~# apt install nvidia-detect ... root@zz:~# nvidia-detect Detected NVIDIA GPUs: 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) Checking card: NVIDIA Corporation GT218 [GeForce 210] (rev a2) Your card is only supported by the 340 legacy drivers series, which is only available up to buster. <code>and</code> root@zz:~# apt install nvidia-legacy-340xx-driver ... Рекомендуемые пакеты: nvidia-settings-legacy-340xx nvidia-persistenced nvidia-legacy-340xx-driver-libs-i386 libgles1-nvidia-legacy-340xx libgles2-nvidia-legacy-340xx libnvidia-legacy-340xx-cfg1 Следующие НОВЫЕ пакеты будут установлены: glx-alternative-nvidia glx-diversions libegl1-nvidia-legacy-340xx libgl1-nvidia-legacy-340xx-glx libnvidia-legacy-340xx-ml1 nvidia-installer-cleanup nvidia-kernel-common nvidia-legacy-340xx-alternative nvidia-legacy-340xx-driver nvidia-legacy-340xx-driver-bin nvidia-legacy-340xx-driver-libs nvidia-legacy-340xx-kernel-dkms nvidia-legacy-340xx-kernel-support nvidia-legacy-340xx-vdpau-driver nvidia-modprobe nvidia-support xserver-xorg-video-nvidia-legacy-340xx ... Done. ...But nvidia-settings is gone
root@zz:~# LANG=en_US.UTF-8 apt install nvidia-settings-legacy-340xx .... Package nvidia-settings-legacy-340xx is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'nvidia-settings-legacy-340xx' has no installation candidate root@zz:~# apt list nvidia-settings* ... nvidia-settings-legacy-390xx/stable 390.144-1 amd64 nvidia-settings-legacy-390xx/stable 390.144-1 i386 nvidia-settings-tesla-418/stable 418.113-6 amd64 nvidia-settings-tesla-450/stable 450.119.03-1 amd64 nvidia-settings-tesla-460/stable 460.91.03-1 amd64 nvidia-settings-tesla-470/stable 470.141.03-1~deb11u1 amd64 nvidia-settings/stable 470.141.03-1~deb11u1 amd64Exist the nvidia-xconfig
root@zz:~# apt install nvidia-xconfig libnvidia-legacy-340xx-cfg1 ... root@zz:~# nvidia-xconfig -o test.conf WARNING: Unable to locate/open X configuration file. New X configuration file written to 'test.conf'But xorg.conf looks like empty and with this cfg1 and flags like –nvidia-xinerama-info
And, as I might, –mode=1440×900 or –mode-list=”1920×1080 1440×900 1368×768 1280×800 1280×720″
is not quite suitable.i put it together with part of output of Xorg :1 -configure… with some testing with the Section”Screen”
and write to /etc/X11/xorg.conf such contentSection "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "built-ins" EndSection Section "Module" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" Option "DPMS" EndSection ### all before from # Xorg :1 -configure Section "Device" ### commented from # Xorg :1 -configure ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "SWcursor" # [<bool>] #Option "HWcursor" # [<bool>] #Option "NoAccel" # [<bool>] #Option "ShadowFB" # [<bool>] #Option "VideoKey" # <i> #Option "WrappedFB" # [<bool>] #Option "GLXVBlank" # [<bool>] #Option "ZaphodHeads" # <str> #Option "PageFlip" # [<bool>] #Option "SwapLimit" # <i> #Option "AsyncUTSDFS" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # <i> #Identifier "Card0" #Driver "nouveau" #BusID "PCI:1:0:0" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "AllowIndirectGLXProtocol" "off" Option "TripleBuffer" "on" Option "Stereo" "0" Option "metamodes" "1440x900_59.89 +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" Option "AllowEmptyInitialConfiguration" "True" Option "MetaModes" "1440x900 +0+0" SubSection "Display" Depth 24 Modes "1920x1080" "1440x900" "1368x768" "1280x800" "1280x720" EndSubSection EndSectionAfter rebooting font & locale in the Ctrl+Alt+F2 Teminal got better …
Some warnings while booting not seem to does affect the workroot@zz:~# grep nvidia /var/log/dmesg [ 2.500926] udevd[175]: Error running install command 'modprobe -i nvidia-legacy-340xx ' for module nvidia: retcode 1 [ 10.204520] nvidia: loading out-of-tree module taints kernel. [ 10.204539] nvidia: module license 'NVIDIA' taints kernel. [ 10.233459] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0but now there are fewer modes where
root@zz:~# xrandr -q Screen 0: minimum 8 x 8, current 1440 x 900, maximum 8192 x 8192 DVI-I-0 disconnected primary (normal left inverted right x axis y axis) VGA-0 connected 1440x900+0+0 (normal left inverted right x axis y axis) 480mm x 270mm 1920x1080 60.00 + 1680x1050 59.95 1600x1200 60.00 1440x900 59.89* 1400x1050 59.98 1280x1024 75.02 60.02 1280x960 60.00 1152x864 75.00 1024x768 75.03 70.07 60.00 800x600 75.00 72.19 60.32 56.25 640x480 75.00 72.81 59.94 DVI-I-1 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis)it is not 1280×800 or 1368×768.
… 1440×900 is good for me, but and it is not runs as default mode.Before I didn’t know what to do with the excess
Now I wouldn’t be so upset…Does anyone have a working file made in the normal way?)
I would like to see … preferably with a screen resolution changed by default- This topic was modified 6 months, 2 weeks ago by user_x.
Arsenallish
Hello. I tried to install antiX 22 onto my Thinkpad T400. I tried doing the “Customize the disk layout” and then took the encrypted layout in the right click menu and didn’t modify it. At 9% it gives the “Failed to open LUKS container.” error message and installation stops just like with OP. This also occurs when I choose the full disk install with encryption. I think it will happen any time there is LUKS involved.
Looking at gparted, the partitions seem to have been created but doing “open encryption” on the root partition does not work after putting in the password, probably because it was never created completely in the first place.
I disabled the auto mount, and it still is not working. I would really like to be able to try out antiX, so I would love to know how to fix this. Thanks.
Here is the system inxi output from the installation media:
System: Kernel: 4.9.0-326-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: IceWM v: 3.0.1 dm: slimski v: 1.5.0 Distro: antiX-22_x64-full Grup Yorum 18 October 2022 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: LENOVO product: 2768HH4 v: ThinkPad T400 serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: LENOVO model: 2768HH4 serial: <superuser required> BIOS: LENOVO v: 7UET94WW (3.24 ) date: 10/17/2012 Memory: RAM: total: 7.79 GiB used: 552.1 MiB (6.9%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: dual core model: Intel Core2 Duo P9500 bits: 64 type: MCP smt: <unsupported> arch: Penryn Yorkfield rev: A cache: L1: 128 KiB L2: 6 MiB Speed (MHz): avg: 800 min/max: 800/2534 boost: enabled cores: 1: 800 2: 800 bogomips: 10108 Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts est flexpriority fpu fxsr ht ida kaiser lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge pni pse pse36 rep_good sep smx ss sse sse2 sse4_1 ssse3 syscall tm tm2 tpr_shadow tsc vme vmx vnmi xsave xtpr Graphics: Device-1: AMD RV620/M82 [Mobility Radeon HD 3450/3470] vendor: Lenovo driver: radeon v: kernel arch: TeraScale ports: active: LVDS-1 empty: DVI-I-1,VGA-1 bus-ID: 01:00.0 chip-ID: 1002:95c4 class-ID: 0300 Device-2: Lenovo Integrated Webcam type: USB driver: uvcvideo bus-ID: 1-6:4 chip-ID: 17ef:1004 class-ID: 0e02 serial: <filter> Display: server: X.Org v: 1.20.11 driver: X: loaded: radeon unloaded: fbdev,modesetting,vesa gpu: radeon display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.00x9.37") s-diag: 449mm (17.69") Monitor-1: LVDS-1 mapped: LVDS model: Lenovo 0x4036 res: 1440x900 hz: 60 dpi: 120 size: 304x190mm (11.97x7.48") diag: 358mm (14.1") modes: max: 1440x900 min: 640x480 OpenGL: renderer: AMD RV620 (DRM 2.49.0 / 4.9.0-326-antix.1-amd64-smp LLVM 11.0.1) v: 3.3 Mesa 20.3.5 compat-v: 3.0 direct render: Yes Audio: Device-1: Intel 82801I HD Audio vendor: Lenovo ThinkPad T400 driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403 Sound Server-1: ALSA v: k4.9.0-326-antix.1-amd64-smp running: yes Network: Device-1: Intel 82567LM Gigabit Network vendor: Lenovo ThinkPad T400 driver: e1000e v: 3.2.6-k port: 1840 bus-ID: 00:19.0 chip-ID: 8086:10f5 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Intel Ultimate N WiFi Link 5300 driver: iwlwifi v: kernel bus-ID: 03:00.0 chip-ID: 8086:4236 class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 935.29 GiB used: 1.39 GiB (0.1%) ID-1: /dev/sda vendor: Crucial model: CT1000MX500SSD1 size: 931.51 GiB speed: 3.0 Gb/s type: SSD serial: <filter> rev: 043 scheme: MBR ID-2: /dev/sdb type: USB vendor: USBest model: Technology USB Mass Storage Device size: 3.77 GiB type: N/A serial: <filter> rev: 0.00 scheme: MBR Message: No optical or floppy data found. Partition: ID-1: /live/boot-dev size: 3.76 GiB used: 1.39 GiB (37.0%) fs: vfat dev: /dev/sdb1 label: ANTIX-LIVE uuid: D63C-0DDB Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/sda1 size: 1024 MiB fs: ext4 label: boot uuid: 4c12db23-dced-42d8-923b-9d72fe2379f9 ID-2: /dev/sda3 size: 8 GiB fs: <superuser required> label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-1:2 info: Transcend Information 2GB/4GB/8GB Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 98mA chip-ID: 1307:0165 class-ID: 0806 serial: <filter> Device-2: 1-6:4 info: Lenovo Integrated Webcam type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 17ef:1004 class-ID: 0e02 serial: <filter> Hub-2: 2-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-3: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-4: 4-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-5: 5-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-6: 6-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-7: 7-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-8: 8-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-9: 9-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-10: 10-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 42.0 C mobo: 40.0 C Fan Speeds (RPM): fan-1: 3424 Info: Processes: 147 Uptime: 3h 3m wakeups: 3 Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Packages: apt: 1569 Shell: Bash v: 5.1.4 running-in: roxterm inxi: 3.3.19Attachments:
In reply to: screen flickering now and then
ModdIt
Hi AB,
I would try the Kingston RAM on its own, 4GB is good to have, plenty for
swapping reduction with antiX.To see what specs you can safely fit pls see your Mother board or device manual.
kingston is good quality so probably a timing issue.Please, without offence, take in to consideration
Although the word bugger is considered mild swearing and often in plentiful usage
in uk or downunder, some forum users might know its real background and not appreciate
its usage.- This reply was modified 6 months, 3 weeks ago by ModdIt.
- This reply was modified 6 months, 3 weeks ago by ModdIt.
Forum for users of antiX Linux. Mean and Lean and Proudly anti-fascist.
