-
Search Results
-
In reply to: Some luxury feature after taskbar click
BobC
Its called pseudo-code. It becomes documentation and explains how the program should work, from a design view.
Step 8 and 7 should be swapped. If the window was added, just exit. No need to sleep another second before exiting.
See if you can figure out how to code it…
Wallon
Dear users,
Here is a copy of my fstab to handle f2fs formatting on a USB 3.0 stick/key.
# Pluggable devices are handled by uDev, they are not in fstab UUID=85c897e2-99c3-425f-883f-f478319669aa / f2fs nodiscard,noatime,lazytime 0 0 UUID=1486d372-b599-42d0-978c-ad7c6daf9060 /boot ext4 nodiscard,noatime 0 2 UUID=3a7c8257-800d-49bd-9186-0df74cb1cdaa swap swap defaults 0 0You will notice in the
– the second to last column that I put zeros everywhere because I don’t use dump,
– the last column (fdisk) that I also put zeros for the swap and f2fs partitions. (*) (**)(*) As fdisk is very slow to run on f2fs partitions, it is recommended to disable the option.
(**) For the /boot partition in ext4, you can put 2 or 0. It is up to you.
During installation, antiX considers the fourth partition FAT32 as another USB stick and will therefore be managed by uDev.
Best regards,
WallonWallon
Dear users,
I have found a solution.
You need to install at least 3 partitions;
1) a 512 M /boot partition formatted ext4,
2) a swap partition formatted swap,
3) a /root partition formatted f2fs,
4) you can have a 4th partition for data shared with other OS.While upgrading a fresh install, Debian wanted to update the Grub. I said yes and chose the /boot partition.
I rebooted the PC and it appears that the Grub is broken.With another Live USB key, I followed the following steps;
1) control centre,
2) disk
3) automount
4) I unchecked automountThen I did this;
1) control centre
2) maintenance,
3) boot repair
4) reinstall Grub
5.1) install in MBR
5.2) location: sdb
5.3) select root location: sdb3 (/root)I have repaired the Grub successfully.
For people who are disappointed with Ubuntu, come and try antiX on a USB stick formatted in f2fs. It works very well.
Best regards,
WallonIn reply to: How to get rid of freezes on low RAM PC’s.
oops
… Good idea Qwerty .
An other workaround is to use zswap.
In reply to: How to get rid of freezes on low RAM PC’s.
Qwerty
Making a system to start swapping earlier is called “vm.watermark_scale_factor”. I feel like it’s the most relevant setting that should be changed first. It should be high for low-RAM desktop systems. Its upper bound is 1000 (= 10% of memory), which seems to be a reasonable choice for something like a 2-Gb-RAM system that’s used with heavy software like modern browsers (and by “heavy” I mean allocating and deallocating big chucks of memory often). Depending on your hardware and software, other values can make sense.
As for “vm.swappiness”, I set it to 100 for my frugal antiX installation. I don’t know if I need it that high now, but I left kept it from the time I was doing experiments running a live system from a USB flash drive with a swap on an HDD, in which case swapping to HDD was strictly better. It works fine. In any case, setting it to any relatively large value should be a good idea in the context of low-RAM PCs.
Other settings to experiment with may be “vm.dirty_background_ratio”, “vm.dirty_ratio”, “vm.vfs_cache_pressure”, but it’s unclear to me if it’s worth the effort.- This reply was modified 7 months ago by Qwerty.
In reply to: Firefox ESR updates (91.4, Oct ESR 102.3)
Brian Masinick
free total used free shared buff/cache available Mem: 7447656 1795104 3963560 65244 1688992 5336232 Swap: 8191996 0 8191996--
Brian MasinickIn reply to: Firefox ESR updates (91.4, Oct ESR 102.3)
user2022
Thank you!
I trying this tunings for firefox-102
See ‘free’ before run FF and ‘free’ after run FF with one antix forum tab
FF used swap on my old computer 🙂Attachments:
In reply to: What are you “here” with today?
Brian Masinick
Got a V6.0 kernel installed here:
pinxi -zv7 System: Kernel: 6.0.0-x64v2-xanmod1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 Desktop: IceWM v: 3.0.1 vt: 7 dm: slimski v: 1.5.0 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) volts: 12.8 min: 11.3 model: HP Primary type: Li-ion serial: <filter> status: not charging Memory: RAM: total: 7.1 GiB used: 577.5 MiB (7.9%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: 6-core model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64 type: MT MCP smt: enabled arch: Zen 2 rev: 1 cache: L1: 384 KiB L2: 3 MiB L3: 8 MiB Speed (MHz): avg: 3554 high: 4056 min/max: 400/4056 boost: enabled cores: 1: 4056 2: 4056 3: 2055 4: 4056 5: 2019 6: 4056 7: 4056 8: 4056 9: 4056 10: 4056 11: 4056 12: 2071 bogomips: 50301 Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves Graphics: Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5.1 pcie: speed: 8 GT/s lanes: 16 ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:164c class-ID: 0300 temp: 38.0 C Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo bus-ID: 1-3:2 chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: eDP-1 mapped: eDP model: ChiMei InnoLux 0x1429 res: 1920x1080 hz: 60 dpi: 158 size: 309x173mm (12.17x6.81") diag: 354mm (13.9") modes: max: 1920x1080 min: 640x480 OpenGL: renderer: AMD RENOIR (DRM 3.48.0 6.0.0-x64v2-xanmod1 LLVM 11.0.1) v: 4.6 Mesa 20.3.5 direct render: Yes Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: speed: 8 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:1637 class-ID: 0403 Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard driver: snd_rn_pci_acp3x v: kernel pcie: speed: 8 GT/s lanes: 16 bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480 Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: speed: 8 GT/s lanes: 16 bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403 Sound API: ALSA v: k6.0.0-x64v2-xanmod1 running: yes Network: Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 01:00.0 chip-ID: 10ec:a85a class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-4:3 chip-ID: 0bda:385a class-ID: e001 serial: <filter> Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: warning rfk-block: hardware: no software: yes address: <filter> Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 18.8 GiB (7.9%) ID-1: /dev/nvme0n1 vendor: Toshiba model: KBG40ZNV256G KIOXIA size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: HP00AE00 temp: 25.9 C scheme: GPT Message: No optical or floppy data found. Partition: ID-1: / size: 47.76 GiB used: 18.72 GiB (39.2%) fs: ext4 dev: /dev/nvme0n1p3 label: rootantiX21 uuid: e1d85e10-a42a-4ed5-a98e-c860607e6910 ID-2: /boot/efi size: 256 MiB used: 72.7 MiB (28.4%) fs: vfat dev: /dev/nvme0n1p1 label: SYSTEM uuid: 669B-9111 Swap: ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p6 label: N/A uuid: d5ee9225-6bf8-4ea5-9299-547b7272c289 Unmounted: ID-1: /dev/nvme0n1p2 size: 48.83 GiB fs: ext4 label: rootMX21 uuid: 38ddb821-0501-4d8a-9266-fb61ab327075 ID-2: /dev/nvme0n1p4 size: 48.83 GiB fs: ext4 label: N/A uuid: e346e37f-8388-4c6c-b17e-b6ecec4b9547 ID-3: /dev/nvme0n1p5 size: 48.83 GiB fs: ext4 label: N/A uuid: f4d82c2c-b2d1-4708-a9ca-3e777c72924e ID-4: /dev/nvme0n1p7 size: 35.09 GiB fs: ext4 label: siduction uuid: e8534128-4ce0-4849-8fc8-4d2a50d8d3e2 USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-3:2 info: Chicony HP TrueVision HD Camera type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Device-2: 1-4:3 info: Realtek Bluetooth Radio type: Bluetooth driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s power: 500mA chip-ID: 0bda:385a class-ID: e001 serial: <filter> Hub-2: 2-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 3-2:2 info: KYE Systems (Mouse Systems) Trackbar Emotion type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: 0458:0007 class-ID: 0301 Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: CPU: 40.4 C mobo: N/A GPU: amdgpu temp: 37.0 C Fan Speeds (RPM): fan-1: 0 fan-2: 0 Info: Processes: 282 Uptime: 2m wakeups: 104 Init: runit v: N/A runlevel: 2 Compilers: gcc: 10.2.1 alt: 10 Packages: pm: dpkg pkgs: 1665 Shell: Bash v: 5.1.4 running-in: roxterm pinxi: 3.3.22-2--
Brian MasinickBrian Masinick
@rokytnji: In regard to the use or lack of use of swap, yes, I do create a swap partition. However, I’ve rarely seen it used AT ALL on any of my systems; I just don’t keep that many things running at the same time. Moreover, ESPECIALLY with antiX, the Web browser is one of the few apps that actually consumes a lot of memory. Frankly, the HIGHEST memory consumption I usually see is somewhere between 1.1 – 1.5 GB, occasionally slightly more; I can’t remember the last time I’ve seen it over 2 GB; even my OLD systems have that much memory, so I very seldom use ANY swap.
Frankly the one application for swap is suspending to disk, and temporarily lowering, but not quite eliminating, all power consumption; even when an operation like that writes to swap, it’s infrequent and doesn’t consume all of it.
--
Brian Masinick
rokytnji
Alert: No swap data was found.Kinda wondering with a terabyte drive. I make a swap partition on my dual cores with smaller drives.
$ inxi -p Partition: ID-1: / size: 51.88 GiB used: 32.6 GiB (62.8%) fs: ext4 dev: /dev/sda1 ID-2: swap-1 size: 2.87 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2 harry@biker:~ $ inxi -C CPU: Info: dual core model: Intel Core i5 M 520 bits: 64 type: MT MCP cache: L2: 512 KiB Speed (MHz): avg: 1722 min/max: 1199/2400 cores: 1: 2373 2: 1628 3: 1406 4: 1481 harry@biker:~ $Like I said. Just wondering. No big deal.
Sometimes I drive a crooked road to get my mind straight.
Not all who Wander are Lost.
I'm not outa place. I'm from outer space.Linux Registered User # 475019
How to Search for AntiX solutions to your problemsHarlem
Still see error message “failed to open LUKS container”
Auto boot was disabled and mx-installer was updated. Generated inxi output follows:
System: Kernel: 4.9.0-279-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: IceWM 2.8.0 vt: 7 dm: N/A Distro: antiX-21_x64-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: LENOVO product: 2716WNB v: ThinkPad R500 serial: <filter> Chassis: type: 10 serial: <filter> Mobo: LENOVO model: 2716WNB serial: <filter> BIOS: LENOVO v: 7YET85WW (3.15 ) date: 02/13/2012 Memory: RAM: total: 3.76 GiB used: 704.4 MiB (18.3%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: Dual Core model: Intel Core2 Duo P8600 bits: 64 type: MCP arch: Penryn rev: A cache: L2: 3 MiB bogomips: 9576 Speed: 800 MHz min/max: 800/2401 MHz boost: enabled Core speeds (MHz): 1: 800 2: 800 Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts est flexpriority fpu fxsr ht ida kaiser lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge pni pse pse36 sep smx ss sse sse2 sse4_1 ssse3 syscall tm tm2 tpr_shadow tsc vme vmx vnmi xsave xtpr Graphics: Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Lenovo driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:2a42 class-ID: 0300 Display: x11 server: X.Org 1.20.11 driver: loaded: intel resolution: 1280x800~60Hz s-dpi: 96 OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express (CTG) v: 2.1 Mesa 20.3.5 direct render: Yes Audio: Device-1: Intel 82801I HD Audio vendor: Lenovo ThinkPad T400 driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403 Sound Server-1: ALSA v: k4.9.0-279-antix.1-amd64-smp running: yes Network: Device-1: Intel PRO/Wireless 5100 AGN [Shiloh] Network driver: iwlwifi v: kernel port: 1c00 bus-ID: 03:00.0 chip-ID: 8086:4237 class-ID: 0280 IF: wlan0 state: down mac: <filter> Device-2: Broadcom NetLink BCM5787M Gigabit Ethernet PCI Express vendor: Lenovo ThinkPad R61 driver: tg3 v: 3.137 port: 1c00 bus-ID: 04:00.0 chip-ID: 14e4:1693 class-ID: 0200 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 465.76 GiB used: 0 KiB (0.0%) ID-1: /dev/sda vendor: MaxDigital model: MD500GBLS size: 465.76 GiB speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1J.1 scheme: MBR Optical-1: /dev/sr0 vendor: MATSHITA model: DVD-RAM UJ880A rev: SB01 dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 62 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running Partition: Message: No partition data found. Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/sda1 size: 1024 MiB fs: ext4 label: boot uuid: 17c9fb80-a919-48c3-b5ba-c98ed757cd90 ID-2: /dev/sda3 size: 5.75 GiB fs: <superuser required> label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-5: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-6: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-7: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-8: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Sensors: System Temperatures: cpu: 50.0 C mobo: 39.0 C Fan Speeds (RPM): cpu: 1960 Info: Processes: 135 Uptime: 5m wakeups: 3 Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Packages: apt: 1572 Shell: Bash v: 5.1.4 running-in: roxterm inxi: 3.3.06I’ll be away for awhile so I want to thank everyone for their time and thought spent in helping.
Best regards,
In reply to: What are you “here” with today?
Brian Masinick
siduction with the xanmod kernel; got the 5.19-14 kernel update at first, then used the Synaptic Package Manager to search for the xanmod kernel and headers, found them, and here they are:
pinxi -zv7 System: Kernel: 6.0.0-x64v2-xanmod1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 Desktop: Xfce v: 4.16.1 tk: Gtk v: 3.24.34 info: xfce4-panel wm: xfwm v: 4.16.1 vt: 7 dm: SDDM Distro: siduction 21.3.0 Wintersky - xfce - (202112231826) base: Debian GNU/Linux bookworm/sid Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) volts: 12.8 min: 11.3 model: HP Primary type: Li-ion serial: <filter> status: not charging Memory: RAM: total: 7.1 GiB used: 921.4 MiB (12.7%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: 6-core model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64 type: MT MCP smt: enabled arch: Zen 2 rev: 1 cache: L1: 384 KiB L2: 3 MiB L3: 8 MiB Speed (MHz): avg: 2084 high: 4056 min/max: 400/4056 boost: enabled cores: 1: 4056 2: 2071 3: 510 4: 437 5: 4056 6: 4056 7: 437 8: 473 9: 4056 10: 400 11: 4056 12: 400 bogomips: 50303 Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves Graphics: Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5.1 pcie: speed: 8 GT/s lanes: 16 ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:164c class-ID: 0300 temp: 39.0 C Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo bus-ID: 1-3:2 chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Display: x11 server: X.Org v: 1.21.1.4 compositor: xfwm v: 4.16.1 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: eDP-1 mapped: eDP model: ChiMei InnoLux 0x1429 res: 1920x1080 hz: 60 dpi: 158 size: 309x173mm (12.17x6.81") diag: 354mm (13.9") modes: max: 1920x1080 min: 640x480 OpenGL: renderer: RENOIR (renoir LLVM 14.0.6 DRM 3.48 6.0.0-x64v2-xanmod1) v: 4.6 Mesa 22.2.0 direct render: Yes Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: speed: 8 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:1637 class-ID: 0403 Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Hewlett-Packard driver: snd_rn_pci_acp3x v: kernel pcie: speed: 8 GT/s lanes: 16 bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480 Device-3: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: speed: 8 GT/s lanes: 16 bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403 Sound API: ALSA v: k6.0.0-x64v2-xanmod1 running: yes Sound Server-1: PulseAudio v: 16.1 running: yes Sound Server-2: PipeWire v: 0.3.59 running: yes Network: Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 01:00.0 chip-ID: 10ec:a85a class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> type: dynamic noprefixroute scope: global IP v6: <filter> type: noprefixroute scope: link WAN IP: <filter> Bluetooth: Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-4:3 chip-ID: 0bda:385a class-ID: e001 serial: <filter> Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2 sub-v: a0cd hci-v: 5.2 rev: d9a8 Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 24.76 GiB (10.4%) ID-1: /dev/nvme0n1 vendor: Toshiba model: KBG40ZNV256G KIOXIA size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: HP00AE00 temp: 28.9 C scheme: GPT Message: No optical or floppy data found. Partition: ID-1: / size: 34.25 GiB used: 24.69 GiB (72.1%) fs: ext4 dev: /dev/nvme0n1p7 label: siduction uuid: e8534128-4ce0-4849-8fc8-4d2a50d8d3e2 ID-2: /boot/efi size: 256 MiB used: 72.7 MiB (28.4%) fs: vfat dev: /dev/nvme0n1p1 label: SYSTEM uuid: 669B-9111 Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/nvme0n1p2 size: 48.83 GiB fs: ext4 label: rootMX21 uuid: 38ddb821-0501-4d8a-9266-fb61ab327075 ID-2: /dev/nvme0n1p3 size: 48.83 GiB fs: ext4 label: rootantiX21 uuid: e1d85e10-a42a-4ed5-a98e-c860607e6910 ID-3: /dev/nvme0n1p4 size: 48.83 GiB fs: ext4 label: N/A uuid: e346e37f-8388-4c6c-b17e-b6ecec4b9547 ID-4: /dev/nvme0n1p5 size: 48.83 GiB fs: ext4 label: N/A uuid: f4d82c2c-b2d1-4708-a9ca-3e777c72924e ID-5: /dev/nvme0n1p6 size: 7.81 GiB fs: swap label: N/A uuid: d5ee9225-6bf8-4ea5-9299-547b7272c289 USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-3:2 info: Chicony HP TrueVision HD Camera type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Device-2: 1-4:3 info: Realtek Bluetooth Radio type: Bluetooth driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s power: 500mA chip-ID: 0bda:385a class-ID: e001 serial: <filter> Hub-2: 2-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 3-2:2 info: KYE Systems (Mouse Systems) Trackbar Emotion type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: 0458:0007 class-ID: 0301 Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 42.8 C mobo: N/A gpu: amdgpu temp: 40.0 C Fan Speeds (RPM): fan-1: 0 fan-2: 0 Info: Processes: 286 Uptime: 1m wakeups: 222 Init: systemd v: 251 target: graphical (5) default: graphical Compilers: gcc: 12.2.0 alt: 11/12 Packages: pm: dpkg pkgs: 2069 Shell: Bash v: 5.2.0 running-in: xfce4-terminal pinxi: 3.3.22-2--
Brian MasinickIn reply to: What are you “here” with today?
Brian Masinick
Here is the OLD HP laptop with the loose hinge:
inxi -zv7 System: Kernel: 4.9.0-279-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: IceWM v: 3.0.1 dm: slimski v: 1.5.0 Distro: antiX-21-runit_x64-base Grup Yorum 30 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: Hewlett-Packard product: HP Compaq 2510p Notebook PC v: F.0E serial: <filter> Chassis: type: 10 serial: <filter> Mobo: Hewlett-Packard model: 30C9 v: KBC Version 75.28 serial: N/A BIOS: Hewlett-Packard v: 68MSP Ver. F.0E date: 11/04/2008 Battery: ID-1: C23D charge: 2.6 Wh (3.5%) condition: 74.6/74.6 Wh (100.0%) volts: 10.7 min: 10.8 model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: discharging Memory: RAM: total: 1.93 GiB used: 379.1 MiB (19.2%) Array-1: capacity: 2 GiB slots: 1 EC: None max-module-size: 2 GiB note: est. Device-1: DIMM #1 type: DDR2 detail: synchronous size: 2 GiB speed: 667 MT/s volts: N/A width (bits): data: 64 total: 64 manufacturer: Hyundai Electronics part-no: HYMP325S64AMP8-Y5 serial: <filter> CPU: Info: dual core model: Intel Core2 Duo U7600 bits: 64 type: MCP smt: <unsupported> arch: Core2 Merom rev: D cache: L1: 128 KiB L2: 2 MiB Speed (MHz): avg: 866 high: 933 min/max: 800/1200 volts: 1.1 V ext-clock: 133 MHz cores: 1: 800 2: 933 bogomips: 4788 Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts est flexpriority fpu fxsr ht kaiser lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge pni pse pse36 rep_good sep ss sse sse2 ssse3 syscall tm tm2 tpr_shadow tsc vme vmx vnmi xtpr Graphics: Device-1: Intel Mobile GM965/GL960 Integrated Graphics vendor: Hewlett-Packard driver: i915 v: kernel arch: Gen-4 ports: active: LVDS-1 empty: SVIDEO-1,VGA-1 bus-ID: 00:02.0 chip-ID: 8086:2a02 class-ID: 0300 Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: intel dri: i965 gpu: i915 display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1280x800 s-dpi: 96 s-size: 338x211mm (13.31x8.31") s-diag: 398mm (15.69") Monitor-1: LVDS-1 mapped: LVDS1 model: Toshiba Matsushita 0x58ef serial: <filter> res: 1280x800 hz: 60 dpi: 125 size: 261x163mm (10.28x6.42") diag: 308mm (12.1") modes: 1280x800 OpenGL: renderer: Mesa DRI Intel 965GM (CL) v: 2.1 Mesa 20.3.5 direct render: Yes Audio: Device-1: Intel 82801H HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:284b class-ID: 0403 Sound API: ALSA v: k4.9.0-279-antix.1-amd64-smp running: yes Network: Device-1: Intel 82566MM Gigabit Network vendor: Hewlett-Packard driver: e1000e v: 3.2.6-k port: 2060 bus-ID: 00:19.0 chip-ID: 8086:1049 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network driver: iwl4965 v: in-tree: bus-ID: 10:00.0 chip-ID: 8086:4229 class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Device-1: HP Bluetooth 2.0 Interface [Broadcom BCM2045] type: USB driver: btusb v: 0.8 bus-ID: 3-1:2 chip-ID: 03f0:171d class-ID: fe01 Report: rfkill ID: hci0 rfk-id: 4 state: down bt-service: not found rfk-block: hardware: no software: yes address: see --recommends Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 74.53 GiB used: 3.82 GiB (5.1%) ID-1: /dev/sda vendor: Toshiba model: MK8009GAH size: 74.53 GiB speed: <unknown> type: N/A serial: <filter> rev: 1C scheme: MBR Optical-1: /dev/sr0 vendor: MATSHITA model: DVD-RAM UJ-842S rev: 1.10 dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running Partition: ID-1: / size: 69.85 GiB used: 3.82 GiB (5.5%) fs: ext4 dev: /dev/sda1 label: rootantiX21 uuid: 92a68c46-48e4-43bc-a4c7-43beb3fd7150 Swap: ID-1: swap-1 type: partition size: 3 GiB used: 0 KiB (0.0%) priority: -1 dev: /dev/sda2 label: swapantiX uuid: a4cf748a-afbd-4522-8549-229f316e765d Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed or root hub ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-3: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 3-1:2 info: HP Bluetooth 2.0 Interface [Broadcom BCM2045] type: Bluetooth driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip-ID: 03f0:171d class-ID: fe01 Hub-4: 4-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 4-1:2 info: HP HP hs2300 HSDPA Broadband Wireless Module type: <vendor specific> driver: sierra interfaces: 1 rev: 1.1 speed: 12 Mb/s chip-ID: 03f0:1e1d class-ID: 0000 Hub-5: 5-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 5-1:2 info: KYE Systems (Mouse Systems) Trackbar Emotion type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: 0458:0007 class-ID: 0301 Device-2: 5-2:3 info: AuthenTec AES2501 Fingerprint Sensor type: <vendor specific> driver: N/A interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 08ff:2580 class-ID: ff00 Hub-6: 6-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-7: 7-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Sensors: System Temperatures: cpu: 60.0 C mobo: 25.0 C Fan Speeds (RPM): N/A Info: Processes: 175 Uptime: 14m wakeups: 3 Init: runit v: N/A runlevel: 2 Compilers: gcc: 10.2.1 alt: 10 Packages: pm: dpkg pkgs: 1216 Shell: Bash (su) v: 5.1.4 running-in: roxterm inxi: 3.3.22--
Brian MasinickIn reply to: What are you “here” with today?
rokytnji
Out at the shop now
harry@shop:~ $ inxi -zv7 System: Kernel: 5.10.57-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: IceWM v: 3.0.1 vt: 7 dm: slimski v: 1.5.0 Distro: antiX-21_x64-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Desktop System: LENOVO product: 6075BHU v: ThinkCentre M57 serial: <superuser required> Chassis: type: 3 serial: <superuser required> Mobo: LENOVO model: LENOVO serial: <superuser required> BIOS: LENOVO v: 2RKT41AUS date: 03/20/2008 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.58 GiB used: 467.6 MiB (12.7%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: dual core model: Intel Pentium Dual E2160 bits: 64 type: MCP smt: <unsupported> arch: Core2 Merom level: v2 rev: D cache: L1: 128 KiB L2: 1024 KiB Speed (MHz): avg: 1489 high: 1758 min/max: 1200/1800 cores: 1: 1758 2: 1221 bogomips: 7181 Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts est fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge pni pse pse36 pti rep_good sep sse sse2 ssse3 syscall tm tm2 tsc vme xtpr Graphics: Device-1: Intel 82Q35 Express Integrated Graphics vendor: Lenovo driver: i915 v: kernel arch: Gen-4 ports: active: VGA-1 empty: none bus-ID: 00:02.0 chip-ID: 8086:29b2 class-ID: 0300 Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: intel unloaded: fbdev,modesetting,vesa gpu: i915 display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1280x1024 s-dpi: 96 s-size: 338x270mm (13.31x10.63") s-diag: 433mm (17.03") Monitor-1: VGA-1 mapped: VGA1 model: ViewSonic VA912-3SERIES serial: <filter> res: 1280x1024 hz: 60 dpi: 86 size: 380x300mm (14.96x11.81") diag: 482mm (19") modes: max: 1280x1024 min: 720x400 OpenGL: renderer: Mesa DRI Intel Q35 v: 1.4 Mesa 20.3.5 direct render: Yes Audio: Device-1: Intel 82801I HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403 Sound Server-1: ALSA v: k5.10.57-antix.1-amd64-smp running: yes Network: Device-1: Intel 82566DM-2 Gigabit Network vendor: Lenovo driver: e1000e v: kernel port: 1820 bus-ID: 00:19.0 chip-ID: 8086:10bd class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Realtek RTL8191SU 802.11n WLAN Adapter type: USB driver: r8712u bus-ID: 2-6.4:5 chip-ID: 0bda:8172 class-ID: 0000 serial: <filter> IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 298.09 GiB used: 29.49 GiB (9.9%) ID-1: /dev/sda vendor: Western Digital model: WD3200AAKS-00B3A0 size: 298.09 GiB speed: <unknown> type: N/A serial: <filter> rev: 3A01 scheme: MBR Optical-1: /dev/sr0 vendor: HL-DT-ST model: RW/DVD GCC-H30N rev: 1.02 dev-links: cdrom,cdrw,dvd Features: speed: 48 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw state: running Partition: ID-1: / size: 252.52 GiB used: 29.49 GiB (11.7%) fs: ext4 dev: /dev/sda4 label: rootantiX21 uuid: f1b7ea1f-dd9f-479b-8bf1-56d1ac2e1a8b Swap: ID-1: swap-1 type: partition size: 3.91 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2 label: N/A uuid: 83f3c3a7-56c1-4666-b6ba-87069c6ee9cf Unmounted: ID-1: /dev/sda1 size: 36.56 GiB fs: ext4 label: N/A uuid: 5091df41-e1b4-4c73-a7bf-a05357b81d9a ID-2: /dev/sda3 size: 1024 KiB fs: ext4 label: /data uuid: cfc7c48a-7166-4682-bb9a-8da7af996851 USB: Hub-1: 1-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-2:2 info: Super Top USB Mass Storage Device type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 400mA chip-ID: 14cd:8168 class-ID: 0806 serial: <filter> Hub-2: 2-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-3: 2-6:4 info: Super Top 4-Port hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 14cd:8601 class-ID: 0900 Device-1: 2-6.4:5 info: Realtek RTL8191SU 802.11n WLAN Adapter type: Network driver: r8712u interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:8172 class-ID: 0000 serial: <filter> Hub-4: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-5: 4-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-6: 5-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-7: 6-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-8: 7-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 7-1:2 info: Microsoft Wheel Mouse Optical type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 045e:0040 class-ID: 0301 Hub-9: 8-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 8-1:2 info: IBM NetVista Full Width Keyboard type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 04b3:3025 class-ID: 0301 Sensors: System Temperatures: cpu: 45.0 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 142 Uptime: 4m wakeups: 1 Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Packages: pm: dpkg pkgs: 1606 Shell: Bash v: 5.1.4 running-in: roxterm inxi: 3.3.21Sometimes I drive a crooked road to get my mind straight.
Not all who Wander are Lost.
I'm not outa place. I'm from outer space.Linux Registered User # 475019
How to Search for AntiX solutions to your problemsIn reply to: What are you “here” with today?
Brian Masinick
Switched to my Lenovo X201; might be similar in a few components to your system; let’s find out:
inxi -zv7 System: Kernel: 4.9.0-326-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: IceWM v: 2.9.9 vt: 7 dm: slimski v: 1.5.0 Distro: antiX-21-runit_x64-base Grup Yorum 30 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: LENOVO product: 3249CTO v: ThinkPad X201 serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: LENOVO model: 3249CTO serial: <superuser required> BIOS: LENOVO v: 6QET66WW (1.36 ) date: 05/31/2011 Battery: ID-1: BAT0 charge: 79.1 Wh (99.7%) condition: 79.3/84.2 Wh (94.2%) volts: 12.1 min: 10.8 model: Panasonic 42T4696 type: Li-ion serial: <filter> status: N/A Memory: RAM: total: 7.6 GiB used: 428.4 MiB (5.5%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: dual core model: Intel Core i7 M 620 bits: 64 type: MT MCP smt: enabled arch: Westmere rev: 5 cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB Speed (MHz): avg: 1299 high: 1466 min/max: 1199/2667 boost: enabled cores: 1: 1199 2: 1466 3: 1333 4: 1199 bogomips: 21278 Flags: acpi aes aperfmperf apic arat arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts ept est flexpriority flush_l1d fpu fxsr ht ibpb ibrs ida kaiser lahf_lm lm mca mce mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pebs pge pni popcnt pse pse36 rdtscp rep_good sep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr Graphics: Device-1: Intel Core Processor Integrated Graphics vendor: Lenovo driver: i915 v: kernel arch: Gen-5.75 ports: active: LVDS-1 empty: DP-1,HDMI-A-1,VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0046 class-ID: 0300 Device-2: Lenovo Integrated Webcam type: USB driver: uvcvideo bus-ID: 1-1.6:5 chip-ID: 17ef:4816 class-ID: 0e02 Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: intel dri: i965 gpu: i915 display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1280x800 s-dpi: 96 s-size: 338x211mm (13.31x8.31") s-diag: 398mm (15.69") Monitor-1: LVDS-1 mapped: LVDS1 model: Lenovo 0x4011 res: 1280x800 hz: 60 dpi: 125 size: 261x163mm (10.28x6.42") diag: 308mm (12.1") modes: 1280x800 OpenGL: renderer: Mesa DRI Intel HD Graphics (ILK) v: 2.1 Mesa 20.3.5 direct render: Yes Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Lenovo 5 driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: 0403 Sound API: ALSA v: k4.9.0-326-antix.1-amd64-smp running: yes Network: Device-1: Intel 82577LM Gigabit Network vendor: Lenovo driver: e1000e v: 3.2.6-k port: 1820 bus-ID: 00:19.0 chip-ID: 8086:10ea class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Intel Centrino Ultimate-N 6300 driver: iwlwifi v: kernel bus-ID: 02:00.0 chip-ID: 8086:4238 class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> type: dynamic scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Device-1: Broadcom BCM2045B (BDC-2.1) type: USB driver: btusb v: 0.8 bus-ID: 1-1.4:4 chip-ID: 0a5c:217f class-ID: fe01 serial: <filter> Report: rfkill ID: hci0 rfk-id: 3 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.24 GiB used: 19.27 GiB (16.2%) ID-1: /dev/sda vendor: Toshiba model: THNS128GG4BAAA-NonFDE size: 119.24 GiB speed: 3.0 Gb/s type: SSD serial: <filter> rev: 0203 scheme: MBR Message: No optical or floppy data found. Partition: ID-1: / size: 110.9 GiB used: 19.27 GiB (17.4%) fs: ext4 dev: /dev/sda1 label: antiX-Frugal uuid: 943febc0-1b85-4cf5-b6c9-807acb58b1ad Swap: ID-1: swap-1 type: partition size: 6 GiB used: 0 KiB (0.0%) priority: -1 dev: /dev/sda2 label: swapantiX uuid: 3772f554-04da-4154-89bc-b1e931af5bad Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed or root hub ports: 3 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 8087:0020 class-ID: 0900 Device-1: 1-1.3:3 info: Upek Biometric Touchchip/Touchstrip Fingerprint Sensor type: <vendor specific> driver: N/A interfaces: 1 rev: 1.0 speed: 12 Mb/s power: 100mA chip-ID: 147e:2016 class-ID: 0000 Device-2: 1-1.4:4 info: Broadcom BCM2045B (BDC-2.1) type: Bluetooth driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip-ID: 0a5c:217f class-ID: fe01 serial: <filter> Device-3: 1-1.6:5 info: Lenovo Integrated Webcam type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 200mA chip-ID: 17ef:4816 class-ID: 0e02 Hub-3: 2-0:1 info: Full speed or root hub ports: 3 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip-ID: 8087:0020 class-ID: 0900 Device-1: 2-1.2:3 info: KYE Systems (Mouse Systems) Trackbar Emotion type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: 0458:0007 class-ID: 0301 Device-2: 2-1.4:4 info: Qualcomm Qualcomm Gobi 2000 type: <vendor specific> driver: qcserial interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 05c6:9204 class-ID: 0000 Sensors: System Temperatures: cpu: 41.0 C mobo: 0.0 C Fan Speeds (RPM): cpu: 1999 Info: Processes: 186 Uptime: 6m wakeups: 3 Init: runit v: N/A runlevel: 2 Compilers: gcc: 10.2.1 alt: 10/9 Packages: pm: dpkg pkgs: 1302 Shell: Bash v: 5.1.4 running-in: roxterm inxi: 3.3.22--
Brian Masinick
Forum for users of antiX Linux. Mean and Lean and Proudly anti-fascist.
