-
Search Results
-
Topic: Ati RV370 problem
anewangelfades
Hello,
I have a problem with 3D graphics acceleration after I install antix on my hard disk, for example glxgears shows a black window only, while it works in the live session if I boot from DVD.The output of inxi -Fxz -r is the following:
System: Host: antix-fisso Kernel: 5.2.15-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 8.3.0 Desktop: JWM 2.3.7 Distro: antiX-19_x64-full Marielle Franco 16 October 2019 base: Debian GNU/Linux 10 (buster) Machine: Type: Desktop Mobo: ASUSTeK model: P5SD2-X v: Rev 1.xx serial: <filter> BIOS: American Megatrends v: 0605 date: 03/21/2006 CPU: Topology: Single Core model: Intel Pentium 4 bits: 64 type: MT arch: Netburst Smithfield rev: 3 L2 cache: 2048 KiB flags: lm nx pae sse sse2 sse3 bogomips: 12000 Speed: 3000 MHz min/max: N/A Core speeds (MHz): 1: 3000 2: 3000 Graphics: Device-1: AMD RV370 [Radeon X300] vendor: PC Partner Limited driver: radeon v: kernel bus ID: 01:00.0 Display: x11 server: X.Org 1.20.4 driver: ati,radeon unloaded: fbdev,modesetting,vesa resolution: 1680x1050~60Hz OpenGL: renderer: ATI RV370 v: 2.1 Mesa 18.3.6 direct render: Yes Audio: Device-1: Silicon Integrated Systems [SiS] SiS7012 AC97 Sound vendor: ASUSTeK A8S-X driver: snd_intel8x0 v: kernel bus ID: 00:02.7 Sound Server: ALSA v: k5.2.15-antix.1-amd64-smp Network: Device-1: Intel 82540EM Gigabit Ethernet vendor: ASUSTeK driver: e1000 v: 7.3.21-k8-NAPI port: 9000 bus ID: 00:0e.0 IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> Drives: Local Storage: total: 310.10 GiB used: 5.38 GiB (1.7%) ID-1: /dev/sda vendor: Maxtor model: 6L250R0 size: 233.76 GiB ID-2: /dev/sdb vendor: Maxtor model: 6Y080L0 size: 76.34 GiB Partition: ID-1: / size: 227.09 GiB used: 5.38 GiB (2.4%) fs: ext4 dev: /dev/sda1 ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://it.mxrepo.com/antix/buster/ buster main nonfree Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.it.debian.org/debian/ buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.it.debian.org/debian/ buster main contrib non-free 2: deb http://security.debian.org/ buster/updates main contrib non-free No active apt repos in: /etc/apt/sources.list.d/onion.list No active apt repos in: /etc/apt/sources.list.d/various.list Info: Processes: 122 Uptime: 21m Memory: 1.94 GiB used: 515.7 MiB (25.9%) Init: SysVinit runlevel: 5 Compilers: gcc: 8.3.0 Shell: bash v: 5.0.3 inxi: 3.0.36Do anybody know why?
Thanks in advance- This topic was modified 3 years, 6 months ago by anewangelfades.
In reply to: black screen system hang before login
andfree
Hi. I have already written here about having the same issue.
My system is not dual boot. I have Nvidia; not ATI-Radeon.
I notice that the times I don’t have the issue are the times the WiFi adapter is disconnected before rebooting.$ inxi -v8 System: Host: dragon Kernel: 4.9.193-antix.1-486-smp i686 bits: 32 compiler: gcc v: 8.3.0 parameters: BOOT_IMAGE=/boot/vmlinuz-4.9.193-antix.1-486-smp root=UUID=f524e9f6-3629-485f-a653-23fc7a7dbf1d ro vga=791 quiet Desktop: IceWM 1.5.5+git20190610 dm: SLiM 1.3.6 Distro: antiX-19_386-full Marielle Franco 16 October 2019 base: Debian GNU/Linux 10 (buster) Machine: Type: Laptop System: TOSHIBA product: Satellite 2450 v: PS245E-03TE0-GK serial: <root required> Chassis: type: 10 v: Version 1.0 serial: <root required> Mobo: TOSHIBA model: Portable PC v: Version A0 serial: <root required> BIOS: TOSHIBA v: Version 1.30 date: 03/20/2003 Memory: RAM: total: 1001.1 MiB used: 398.9 MiB (39.8%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Topology: Single Core model: Intel Pentium 4 bits: 32 type: MCP arch: Netburst Northwood family: F (15) model-id: 2 stepping: 7 microcode: 37 L2 cache: 512 KiB bogomips: 5585 Speed: 2793 MHz min/max: N/A Core speed (MHz): 1: 2793 Flags: acpi bts cid clflush cmov cx8 de dts fpu fxsr ht mca mce mmx msr mtrr pae pat pbe pebs pge pse pse36 sep ss sse sse2 tm tsc vme xtpr Vulnerabilities: Type: l1tf status: Vulnerable Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled Type: meltdown status: Vulnerable Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling Graphics: Device-1: NVIDIA NV17M [GeForce4 420 Go] vendor: Toshiba America Info Systems driver: nouveau v: kernel bus ID: 01:00.0 chip ID: 10de:0175 Display: x11 server: X.Org 1.20.4 driver: nouveau unloaded: fbdev,modesetting,vesa alternate: nv resolution: 1024x768~60Hz OpenGL: renderer: Mesa DRI nv17 x86/MMX/SSE2 v: 1.2 Mesa 18.3.6 direct render: Yes Audio: Device-1: Intel 82801DB/DBL/DBM AC97 Audio vendor: Toshiba America Info Systems driver: snd_intel8x0 v: kernel bus ID: 00:1f.5 chip ID: 8086:24c5 Sound Server: ALSA v: k4.9.193-antix.1-486-smp Network: Device-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Toshiba America Info Systems driver: 8139too v: 0.9.28 port: ce00 bus ID: 02:09.0 chip ID: 10ec:8139 IF: eth0 state: down mac: 00:08:0d:7c:bb:61 IF-ID-1: wlan0 state: up mac: 94:0c:6d:8e:48:a4 IP v4: 192.168.1.30/24 scope: global broadcast: 192.168.1.255 IP v6: 2a02:587:d45:d700:960c:6dff:fe8e:48a4/64 type: dynamic mngtmpaddr scope: global IP v6: fe80::960c:6dff:fe8e:48a4/64 scope: link WAN IP: 2a02:587:d45:d700:960c:6dff:fe8e:48a4 Drives: Local Storage: total: 93.16 GiB used: 26.08 GiB (28.0%) ID-1: /dev/sda vendor: Toshiba model: MK1032GAX size: 93.16 GiB block size: physical: 512 B logical: 512 B speed: <unknown> serial: 76BS0238S rev: 1A scheme: MBR Optical-1: /dev/sr0 vendor: TOSHIBA model: DVD-ROM SD-R6012 rev: 1334 dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 91.13 GiB size: 89.19 GiB (97.87%) used: 26.08 GiB (29.2%) fs: ext4 dev: /dev/sda1 label: rootantiX19 uuid: f524e9f6-3629-485f-a653-23fc7a7dbf1d ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 10 (default 60) cache pressure: 50 (default 100) dev: /dev/sda2 label: swapantiX uuid: 80bdd75f-8620-4a07-9d26-c2b13df6bd75 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Device-1: 1-3:6 info: N/A type: Network driver: carl9170 interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0cf3:1002 serial: 12345 Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Device-2: 2-2:2 info: N/A type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 045e:007d Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Sensors: System Temperatures: cpu: 61.0 C mobo: N/A Fan Speeds (RPM): N/A Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://ftp.cc.uoc.gr/mirrors/linux/mx/antix/buster buster main nonfree Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.gr.debian.org/debian/ buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.gr.debian.org/debian/ buster main contrib non-free 2: deb http://security.debian.org/ buster/updates main contrib non-free No active apt repos in: /etc/apt/sources.list.d/onion.list No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 1: cpu: 65.5% command: palemoon pid: 2611 mem: 252.4 MiB (25.2%) 2: cpu: 8.8% command: xorg pid: 2184 mem: 61.9 MiB (6.1%) 3: cpu: 6.6% command: soffice.bin pid: 2869 mem: 171.1 MiB (17.0%) 4: cpu: 0.1% command: [kworker/u2:0] pid: 6 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [rcu_sched] pid: 7 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 252.4 MiB (25.2%) command: palemoon pid: 2611 cpu: 65.5% 2: mem: 171.1 MiB (17.0%) command: soffice.bin pid: 2869 cpu: 6.6% 3: mem: 61.9 MiB (6.1%) command: xorg pid: 2184 cpu: 8.8% 4: mem: 41.6 MiB (4.1%) command: rox pid: 2407 cpu: 0.1% 5: mem: 16.7 MiB (1.6%) command: volumeicon pid: 2425 cpu: 0.0% Info: Processes: 135 Uptime: 32m Init: SysVinit v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 running in: urxvt inxi: 3.0.36$ cat /var/log/Xorg.0.log [ 25.672] X.Org X Server 1.20.4 X Protocol Version 11, Revision 0 [ 25.672] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian [ 25.672] Current Operating System: Linux dragon 4.9.193-antix.1-486-smp #1 SMP Fri Sep 20 08:30:48 EDT 2019 i686 [ 25.672] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.193-antix.1-486-smp root=UUID=f524e9f6-3629-485f-a653-23fc7a7dbf1d ro vga=791 quiet [ 25.672] Build Date: 05 March 2019 08:11:12PM [ 25.672] xorg-server 2:1.20.4-1 (https://www.debian.org/support) [ 25.672] Current version of pixman: 0.36.0 [ 25.672] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 25.672] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 25.672] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 12 15:55:39 2019 [ 25.749] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 25.749] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 25.943] (==) No Layout section. Using the first Screen section. [ 25.944] (==) No screen section available. Using defaults. [ 25.944] (**) |-->Screen "Default Screen Section" (0) [ 25.944] (**) | |-->Monitor "<default monitor>" [ 25.958] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 25.958] (==) Automatically adding devices [ 25.958] (==) Automatically enabling devices [ 25.958] (==) Automatically adding GPU devices [ 25.958] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 26.054] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 26.054] Entry deleted from font path. [ 26.074] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 26.074] Entry deleted from font path. [ 26.074] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 26.074] Entry deleted from font path. [ 26.074] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 26.074] (==) ModulePath set to "/usr/lib/xorg/modules" [ 26.074] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 26.074] (II) Loader magic: 0x772740 [ 26.074] (II) Module ABI versions: [ 26.074] X.Org ANSI C Emulation: 0.4 [ 26.075] X.Org Video Driver: 24.0 [ 26.075] X.Org XInput driver : 24.1 [ 26.075] X.Org Server Extension : 10.0 [ 26.076] (++) using VT number 7 [ 26.077] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 26.077] (II) xfree86: Adding drm device (/dev/dri/card0) [ 26.083] (--) PCI:*(1@0:0:0) 10de:0175:1179:0010 rev 163, Mem @ 0xfd000000/16777216, 0xdc000000/67108864, 0xdbf80000/524288, BIOS @ 0x????????/131072 [ 26.100] (II) LoadModule: "glx" [ 26.203] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 26.396] (II) Module glx: vendor="X.Org Foundation" [ 26.396] compiled for 1.20.4, module version = 1.0.0 [ 26.396] ABI class: X.Org Server Extension, version 10.0 [ 26.558] (==) Matched nouveau as autoconfigured driver 0 [ 26.559] (==) Matched nv as autoconfigured driver 1 [ 26.559] (==) Matched modesetting as autoconfigured driver 2 [ 26.559] (==) Matched fbdev as autoconfigured driver 3 [ 26.559] (==) Matched vesa as autoconfigured driver 4 [ 26.559] (==) Assigned the driver to the xf86ConfigLayout [ 26.559] (II) LoadModule: "nouveau" [ 26.572] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 26.619] (II) Module nouveau: vendor="X.Org Foundation" [ 26.619] compiled for 1.20.3, module version = 1.0.16 [ 26.619] Module class: X.Org Video Driver [ 26.619] ABI class: X.Org Video Driver, version 24.0 [ 26.619] (II) LoadModule: "nv" [ 26.619] (WW) Warning, couldn't open module nv [ 26.619] (EE) Failed to load module "nv" (module does not exist, 0) [ 26.619] (II) LoadModule: "modesetting" [ 26.620] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 26.648] (II) Module modesetting: vendor="X.Org Foundation" [ 26.648] compiled for 1.20.4, module version = 1.20.4 [ 26.648] Module class: X.Org Video Driver [ 26.648] ABI class: X.Org Video Driver, version 24.0 [ 26.648] (II) LoadModule: "fbdev" [ 26.649] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 26.659] (II) Module fbdev: vendor="X.Org Foundation" [ 26.659] compiled for 1.20.0, module version = 0.5.0 [ 26.659] Module class: X.Org Video Driver [ 26.659] ABI class: X.Org Video Driver, version 24.0 [ 26.659] (II) LoadModule: "vesa" [ 26.659] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 26.711] (II) Module vesa: vendor="X.Org Foundation" [ 26.711] compiled for 1.20.1, module version = 2.4.0 [ 26.711] Module class: X.Org Video Driver [ 26.711] ABI class: X.Org Video Driver, version 24.0 [ 26.711] (II) NOUVEAU driver Date: Mon Jan 28 23:25:58 2019 -0500 [ 26.711] (II) NOUVEAU driver for NVIDIA chipset families : [ 26.711] RIVA TNT (NV04) [ 26.713] RIVA TNT2 (NV05) [ 26.713] GeForce 256 (NV10) [ 26.713] GeForce 2 (NV11, NV15) [ 26.713] GeForce 4MX (NV17, NV18) [ 26.713] GeForce 3 (NV20) [ 26.713] GeForce 4Ti (NV25, NV28) [ 26.713] GeForce FX (NV3x) [ 26.713] GeForce 6 (NV4x) [ 26.713] GeForce 7 (G7x) [ 26.713] GeForce 8 (G8x) [ 26.713] GeForce 9 (G9x) [ 26.713] GeForce GTX 2xx/3xx (GT2xx) [ 26.713] GeForce GTX 4xx/5xx (GFxxx) [ 26.713] GeForce GTX 6xx/7xx (GKxxx) [ 26.713] GeForce GTX 9xx (GMxxx) [ 26.715] GeForce GTX 10xx (GPxxx) [ 26.715] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 26.715] (II) FBDEV: driver for framebuffer: fbdev [ 26.715] (II) VESA: driver for VESA chipsets: vesa [ 26.717] (II) [drm] nouveau interface version: 1.3.1 [ 26.717] (WW) Falling back to old probe method for modesetting [ 26.717] (WW) Falling back to old probe method for fbdev [ 26.717] (II) Loading sub module "fbdevhw" [ 26.717] (II) LoadModule: "fbdevhw" [ 26.717] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 26.830] (II) Module fbdevhw: vendor="X.Org Foundation" [ 26.830] compiled for 1.20.4, module version = 0.0.2 [ 26.830] ABI class: X.Org Video Driver, version 24.0 [ 26.831] (II) Loading sub module "dri2" [ 26.831] (II) LoadModule: "dri2" [ 26.831] (II) Module "dri2" already built-in [ 26.831] (--) NOUVEAU(0): Chipset: "NVIDIA NV17" [ 26.831] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 26.831] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 26.831] (==) NOUVEAU(0): RGB weight 888 [ 26.831] (==) NOUVEAU(0): Default visual is TrueColor [ 26.831] (==) NOUVEAU(0): Using HW cursor [ 26.831] (==) NOUVEAU(0): Allowed maximum DRI level 2. [ 26.831] (==) NOUVEAU(0): GLX sync to VBlank enabled. [ 26.831] (==) NOUVEAU(0): Page flipping enabled [ 26.831] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2] [ 26.831] (==) NOUVEAU(0): Page flipping synced to vblank by kernel. [ 26.831] (II) NOUVEAU(0): Initializing outputs ... [ 26.848] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 26.848] (II) NOUVEAU(0): Output LVDS-1 has no monitor section [ 26.864] (II) NOUVEAU(0): Output TV-1 has no monitor section [ 26.864] (II) NOUVEAU(0): 3 crtcs needed for screen. [ 26.864] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen. [ 26.864] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen. [ 26.881] (II) NOUVEAU(0): EDID for output VGA-1 [ 26.881] (II) NOUVEAU(0): EDID for output LVDS-1 [ 26.881] (II) NOUVEAU(0): Manufacturer: KPM Model: 0 Serial#: 0 [ 26.881] (II) NOUVEAU(0): Year: 1999 Week: 4 [ 26.881] (II) NOUVEAU(0): EDID Version: 1.2 [ 26.881] (II) NOUVEAU(0): Digital Display Input [ 26.881] (II) NOUVEAU(0): Indeterminate output size [ 26.881] (II) NOUVEAU(0): Gamma: 1.00 [ 26.881] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off [ 26.881] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 [ 26.881] (II) NOUVEAU(0): First detailed timing is preferred mode [ 26.881] (II) NOUVEAU(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000 [ 26.881] (II) NOUVEAU(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000 [ 26.881] (II) NOUVEAU(0): Supported established timings: [ 26.881] (II) NOUVEAU(0): 1024x768@60Hz [ 26.881] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 26.881] (II) NOUVEAU(0): Supported detailed timing: [ 26.881] (II) NOUVEAU(0): clock: 65.0 MHz Image Size: 0 x 0 mm [ 26.881] (II) NOUVEAU(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 [ 26.881] (II) NOUVEAU(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 [ 26.881] (II) NOUVEAU(0): EDID (in hex): [ 26.881] (II) NOUVEAU(0): 00ffffffffffff002e0d000000000000 [ 26.881] (II) NOUVEAU(0): 0409010280000000e200000000000000 [ 26.881] (II) NOUVEAU(0): 00000000080001010101010101010101 [ 26.881] (II) NOUVEAU(0): 01010101010164190040410026301888 [ 26.881] (II) NOUVEAU(0): 36000000000000180000000000000000 [ 26.881] (II) NOUVEAU(0): 00000000000000000000000000000000 [ 26.881] (II) NOUVEAU(0): 00000000000000000000000000000000 [ 26.881] (II) NOUVEAU(0): 000000000000000000000000000000ff [ 26.881] (II) NOUVEAU(0): Printing probed modes for output LVDS-1 [ 26.881] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP) [ 26.881] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 26.881] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz) [ 26.882] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz) [ 26.882] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz) [ 26.882] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz) [ 26.898] (II) NOUVEAU(0): EDID for output TV-1 [ 26.898] (II) NOUVEAU(0): Output VGA-1 disconnected [ 26.898] (II) NOUVEAU(0): Output LVDS-1 connected [ 26.898] (II) NOUVEAU(0): Output TV-1 disconnected [ 26.898] (II) NOUVEAU(0): Using exact sizes for initial modes [ 26.898] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1024x768 +0+0 [ 26.898] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0) [ 26.898] (II) NOUVEAU(0): Virtual size is 1024x768 (pitch 0) [ 26.898] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz [ 26.898] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP) [ 26.898] (**) NOUVEAU(0): Mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz [ 26.898] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 26.898] (**) NOUVEAU(0): Mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz [ 26.898] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz) [ 26.898] (**) NOUVEAU(0): Mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz [ 26.898] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz) [ 26.898] (**) NOUVEAU(0): Mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz [ 26.898] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz) [ 26.898] (**) NOUVEAU(0): Mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz [ 26.898] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz) [ 26.898] (==) NOUVEAU(0): DPI set to (96, 96) [ 26.898] (II) Loading sub module "fb" [ 26.898] (II) LoadModule: "fb" [ 26.898] (II) Loading /usr/lib/xorg/modules/libfb.so [ 26.906] (II) Module fb: vendor="X.Org Foundation" [ 26.906] compiled for 1.20.4, module version = 1.0.0 [ 26.906] ABI class: X.Org ANSI C Emulation, version 0.4 [ 26.906] (II) Loading sub module "shadowfb" [ 26.906] (II) LoadModule: "shadowfb" [ 26.907] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 26.909] (II) Module shadowfb: vendor="X.Org Foundation" [ 26.909] compiled for 1.20.4, module version = 1.0.0 [ 26.909] ABI class: X.Org ANSI C Emulation, version 0.4 [ 26.909] (II) UnloadModule: "modesetting" [ 26.909] (II) Unloading modesetting [ 26.909] (II) UnloadModule: "fbdev" [ 26.909] (II) Unloading fbdev [ 26.909] (II) UnloadSubModule: "fbdevhw" [ 26.909] (II) Unloading fbdevhw [ 26.909] (II) UnloadModule: "vesa" [ 26.909] (II) Unloading vesa [ 26.911] (II) NOUVEAU(0): Channel setup complete. [ 26.936] (II) NOUVEAU(0): Hardware support for Present enabled [ 26.936] (II) NOUVEAU(0): [DRI2] Setup complete [ 26.936] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau_vieux [ 26.936] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau_vieux [ 26.936] (II) Loading sub module "exa" [ 26.936] (II) LoadModule: "exa" [ 26.936] (II) Loading /usr/lib/xorg/modules/libexa.so [ 26.949] (II) Module exa: vendor="X.Org Foundation" [ 26.949] compiled for 1.20.4, module version = 2.6.0 [ 26.949] ABI class: X.Org Video Driver, version 24.0 [ 26.949] (II) EXA(0): Driver allocated offscreen pixmaps [ 26.949] (II) EXA(0): Driver registered support for the following operations: [ 26.949] (II) Solid [ 26.949] (II) Copy [ 26.949] (II) Composite (RENDER acceleration) [ 26.949] (II) UploadToScreen [ 26.949] (II) DownloadFromScreen [ 26.949] (==) NOUVEAU(0): Backing store enabled [ 26.949] (==) NOUVEAU(0): Silken mouse enabled [ 26.950] (==) NOUVEAU(0): DPMS enabled [ 26.952] (II) Initializing extension Generic Event Extension [ 26.953] (II) Initializing extension SHAPE [ 26.953] (II) Initializing extension MIT-SHM [ 26.954] (II) Initializing extension XInputExtension [ 26.955] (II) Initializing extension XTEST [ 26.956] (II) Initializing extension BIG-REQUESTS [ 26.956] (II) Initializing extension SYNC [ 26.956] (II) Initializing extension XKEYBOARD [ 26.957] (II) Initializing extension XC-MISC [ 26.957] (II) Initializing extension SECURITY [ 26.958] (II) Initializing extension XFIXES [ 26.958] (II) Initializing extension RENDER [ 26.958] (II) Initializing extension RANDR [ 26.959] (II) Initializing extension COMPOSITE [ 26.960] (II) Initializing extension DAMAGE [ 26.960] (II) Initializing extension MIT-SCREEN-SAVER [ 26.961] (II) Initializing extension DOUBLE-BUFFER [ 26.961] (II) Initializing extension RECORD [ 26.961] (II) Initializing extension DPMS [ 26.962] (II) Initializing extension Present [ 26.962] (II) Initializing extension DRI3 [ 26.962] (II) Initializing extension X-Resource [ 26.963] (II) Initializing extension XVideo [ 26.963] (II) Initializing extension XVideo-MotionCompensation [ 26.963] (II) Initializing extension SELinux [ 26.963] (II) SELinux: Disabled on system [ 26.963] (II) Initializing extension GLX [ 27.336] (II) AIGLX: Loaded and initialized nouveau_vieux [ 27.336] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 27.336] (II) Initializing extension XFree86-VidModeExtension [ 27.337] (II) Initializing extension XFree86-DGA [ 27.337] (II) Initializing extension XFree86-DRI [ 27.337] (II) Initializing extension DRI2 [ 27.342] (II) NOUVEAU(0): NVEnterVT is called. [ 27.922] (II) NOUVEAU(0): Setting screen physical size to 270 x 203 [ 27.922] resize called 1024 768 [ 28.422] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 28.423] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 28.423] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 28.423] (II) LoadModule: "libinput" [ 28.423] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 28.529] (II) Module libinput: vendor="X.Org Foundation" [ 28.567] compiled for 1.20.4, module version = 0.28.2 [ 28.567] Module class: X.Org XInput Driver [ 28.567] ABI class: X.Org XInput driver, version 24.1 [ 28.567] (II) Using input driver 'libinput' for 'Power Button' [ 28.567] (**) Power Button: always reports core events [ 28.567] (**) Option "Device" "/dev/input/event5" [ 28.567] (**) Option "_source" "server/udev" [ 28.752] (II) event5 - Power Button: is tagged by udev as: Keyboard [ 28.752] (II) event5 - Power Button: device is a keyboard [ 28.752] (II) event5 - Power Button: device removed [ 28.753] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5" [ 28.753] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 28.753] (**) Option "xkb_model" "pc105" [ 28.753] (**) Option "xkb_layout" "us,gr" [ 28.753] (**) Option "xkb_variant" ",simple" [ 28.753] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp" [ 28.816] (II) event5 - Power Button: is tagged by udev as: Keyboard [ 28.816] (II) event5 - Power Button: device is a keyboard [ 28.817] (II) config/udev: Adding input device Video Bus (/dev/input/event6) [ 28.817] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 28.817] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 28.817] (II) Using input driver 'libinput' for 'Video Bus' [ 28.817] (**) Video Bus: always reports core events [ 28.817] (**) Option "Device" "/dev/input/event6" [ 28.817] (**) Option "_source" "server/udev" [ 28.819] (II) event6 - Video Bus: is tagged by udev as: Keyboard [ 28.819] (II) event6 - Video Bus: device is a keyboard [ 28.819] (II) event6 - Video Bus: device removed [ 28.819] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:25/LNXVIDEO:00/input/input7/event6" [ 28.819] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 28.819] (**) Option "xkb_model" "pc105" [ 28.819] (**) Option "xkb_layout" "us,gr" [ 28.819] (**) Option "xkb_variant" ",simple" [ 28.819] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp" [ 28.821] (II) event6 - Video Bus: is tagged by udev as: Keyboard [ 28.821] (II) event6 - Video Bus: device is a keyboard [ 28.821] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 28.821] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 28.822] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 28.822] (II) Using input driver 'libinput' for 'Power Button' [ 28.822] (**) Power Button: always reports core events [ 28.822] (**) Option "Device" "/dev/input/event3" [ 28.822] (**) Option "_source" "server/udev" [ 28.823] (II) event3 - Power Button: is tagged by udev as: Keyboard [ 28.823] (II) event3 - Power Button: device is a keyboard [ 28.823] (II) event3 - Power Button: device removed [ 28.823] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3" [ 28.823] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 28.823] (**) Option "xkb_model" "pc105" [ 28.823] (**) Option "xkb_layout" "us,gr" [ 28.823] (**) Option "xkb_variant" ",simple" [ 28.823] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp" [ 28.825] (II) event3 - Power Button: is tagged by udev as: Keyboard [ 28.825] (II) event3 - Power Button: device is a keyboard [ 28.825] (II) config/udev: Adding input device Lid Switch (/dev/input/event4) [ 28.825] (II) No input driver specified, ignoring this device. [ 28.825] (II) This device may have been added with another device file. [ 28.827] (II) config/udev: Adding input device Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 (/dev/input/event1) [ 28.827] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Applying InputClass "evdev pointer catchall" [ 28.827] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Applying InputClass "libinput pointer catchall" [ 28.827] (II) Using input driver 'libinput' for 'Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0' [ 28.827] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: always reports core events [ 28.827] (**) Option "Device" "/dev/input/event1" [ 28.827] (**) Option "_source" "server/udev" [ 28.880] (II) event1 - Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: is tagged by udev as: Mouse [ 28.880] (II) event1 - Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: device is a pointer [ 28.880] (II) event1 - Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: device removed [ 28.882] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:045E:007D.0001/input/input3/event1" [ 28.882] (II) XINPUT: Adding extended input device "Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0" (type: MOUSE, id 9) [ 28.883] (**) Option "AccelerationScheme" "none" [ 28.883] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: (accel) selected scheme none/0 [ 28.883] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: (accel) acceleration factor: 2.000 [ 28.883] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: (accel) acceleration threshold: 4 [ 28.936] (II) event1 - Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: is tagged by udev as: Mouse [ 28.936] (II) event1 - Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: device is a pointer [ 28.937] (II) config/udev: Adding input device Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 (/dev/input/mouse0) [ 28.937] (II) No input driver specified, ignoring this device. [ 28.937] (II) This device may have been added with another device file. [ 28.937] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 28.937] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 28.937] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 28.937] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 28.937] (**) AT Translated Set 2 keyboard: always reports core events [ 28.938] (**) Option "Device" "/dev/input/event0" [ 28.938] (**) Option "_source" "server/udev" [ 28.939] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 28.939] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 28.939] (II) event0 - AT Translated Set 2 keyboard: device removed [ 28.939] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 28.939] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 28.939] (**) Option "xkb_model" "pc105" [ 28.939] (**) Option "xkb_layout" "us,gr" [ 28.939] (**) Option "xkb_variant" ",simple" [ 28.939] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp" [ 28.941] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 28.941] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 28.942] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2) [ 28.942] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 28.942] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall" [ 28.942] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 28.942] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 28.942] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad" [ 28.942] (II) LoadModule: "synaptics" [ 28.943] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 28.945] (II) Module synaptics: vendor="X.Org Foundation" [ 28.945] compiled for 1.20.1, module version = 1.9.1 [ 28.945] Module class: X.Org XInput Driver [ 28.945] ABI class: X.Org XInput driver, version 24.1 [ 28.945] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 28.945] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 28.945] (**) Option "Device" "/dev/input/event2" [ 28.945] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 85) [ 28.945] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 98) [ 28.945] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 28.945] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 28.945] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 28.945] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 28.945] (**) Option "VertEdgeScroll" "1" [ 28.945] (**) Option "CornerCoasting" "1" [ 28.946] (**) Option "VertTwoFingerScroll" "1" [ 28.946] (**) Option "HorizTwoFingerScroll" "1" [ 28.946] (**) Option "RBCornerButton" "9" [ 28.946] (**) Option "LBCornerButton" "8" [ 28.946] (**) Option "TapButton1" "1" [ 28.946] (**) Option "TapButton2" "2" [ 28.946] (**) Option "TapButton3" "3" [ 28.946] (**) Option "CircularScrolling" "1" [ 28.946] (**) Option "CircScrollTrigger" "7" [ 28.946] (**) Option "MinSpeed" "0.5" [ 28.946] (**) Option "MaxSpeed" "1.0" [ 28.946] (**) Option "AccelFactor" "0.075" [ 28.946] (**) Option "CoastingSpeed" "8" [ 28.946] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 28.946] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 28.946] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2" [ 28.946] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11) [ 28.946] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.0 [ 28.946] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 2.00 [ 28.946] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.075 [ 28.947] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 28.947] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 28.947] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 28.947] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 28.947] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 28.947] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 28.947] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 28.948] (II) config/udev: Adding input device Toshiba input device (/dev/input/event7) [ 28.948] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall" [ 28.948] (**) Toshiba input device: Applying InputClass "libinput keyboard catchall" [ 28.948] (II) Using input driver 'libinput' for 'Toshiba input device' [ 28.948] (**) Toshiba input device: always reports core events [ 28.948] (**) Option "Device" "/dev/input/event7" [ 28.948] (**) Option "_source" "server/udev" [ 28.949] (II) event7 - Toshiba input device: is tagged by udev as: Keyboard [ 28.949] (II) event7 - Toshiba input device: device is a keyboard [ 28.950] (II) event7 - Toshiba input device: device removed [ 28.950] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7" [ 28.950] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 12) [ 28.950] (**) Option "xkb_model" "pc105" [ 28.950] (**) Option "xkb_layout" "us,gr" [ 28.950] (**) Option "xkb_variant" ",simple" [ 28.950] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp" [ 28.951] (II) event7 - Toshiba input device: is tagged by udev as: Keyboard [ 28.951] (II) event7 - Toshiba input device: device is a keyboard [ 53.157] (II) NOUVEAU(0): EDID vendor "KPM", prod id 0 [ 53.157] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 53.157] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP) [ 101.873] (II) config/udev: Adding input device phy0 WPS Button (/dev/input/event8) [ 101.873] (**) phy0 WPS Button: Applying InputClass "evdev keyboard catchall" [ 101.873] (**) phy0 WPS Button: Applying InputClass "libinput keyboard catchall" [ 101.873] (II) Using input driver 'libinput' for 'phy0 WPS Button' [ 101.873] (**) phy0 WPS Button: always reports core events [ 101.873] (**) Option "Device" "/dev/input/event8" [ 101.873] (**) Option "_source" "server/udev" [ 101.875] (II) event8 - phy0 WPS Button: is tagged by udev as: Keyboard [ 101.875] (II) event8 - phy0 WPS Button: device is a keyboard [ 101.875] (II) event8 - phy0 WPS Button: device removed [ 101.875] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/ieee80211/phy0/input9/event8" [ 101.875] (II) XINPUT: Adding extended input device "phy0 WPS Button" (type: KEYBOARD, id 13) [ 101.875] (**) Option "xkb_model" "pc105" [ 101.875] (**) Option "xkb_layout" "us,gr" [ 101.875] (**) Option "xkb_variant" ",simple" [ 101.875] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp" [ 101.881] (II) event8 - phy0 WPS Button: is tagged by udev as: Keyboard [ 101.881] (II) event8 - phy0 WPS Button: device is a keyboard [ 108.858] (II) config/udev: removing device phy0 WPS Button [ 108.859] (II) event8 - phy0 WPS Button: device removed [ 108.860] (II) UnloadModule: "libinput" [ 116.059] (II) config/udev: Adding input device phy1 WPS Button (/dev/input/event8) [ 116.059] (**) phy1 WPS Button: Applying InputClass "evdev keyboard catchall" [ 116.059] (**) phy1 WPS Button: Applying InputClass "libinput keyboard catchall" [ 116.059] (II) Using input driver 'libinput' for 'phy1 WPS Button' [ 116.059] (**) phy1 WPS Button: always reports core events [ 116.059] (**) Option "Device" "/dev/input/event8" [ 116.059] (**) Option "_source" "server/udev" [ 116.060] (II) event8 - phy1 WPS Button: is tagged by udev as: Keyboard [ 116.060] (II) event8 - phy1 WPS Button: device is a keyboard [ 116.061] (II) event8 - phy1 WPS Button: device removed [ 116.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/ieee80211/phy1/input10/event8" [ 116.061] (II) XINPUT: Adding extended input device "phy1 WPS Button" (type: KEYBOARD, id 13) [ 116.061] (**) Option "xkb_model" "pc105" [ 116.061] (**) Option "xkb_layout" "us,gr" [ 116.061] (**) Option "xkb_variant" ",simple" [ 116.061] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp" [ 116.064] (II) event8 - phy1 WPS Button: is tagged by udev as: Keyboard [ 116.064] (II) event8 - phy1 WPS Button: device is a keyboard [ 134.511] (II) config/udev: removing device phy1 WPS Button [ 134.512] (II) event8 - phy1 WPS Button: device removed [ 134.512] (II) UnloadModule: "libinput" [ 141.556] (II) config/udev: Adding input device phy2 WPS Button (/dev/input/event8) [ 141.556] (**) phy2 WPS Button: Applying InputClass "evdev keyboard catchall" [ 141.556] (**) phy2 WPS Button: Applying InputClass "libinput keyboard catchall" [ 141.556] (II) Using input driver 'libinput' for 'phy2 WPS Button' [ 141.556] (**) phy2 WPS Button: always reports core events [ 141.556] (**) Option "Device" "/dev/input/event8" [ 141.556] (**) Option "_source" "server/udev" [ 141.558] (II) event8 - phy2 WPS Button: is tagged by udev as: Keyboard [ 141.558] (II) event8 - phy2 WPS Button: device is a keyboard [ 141.558] (II) event8 - phy2 WPS Button: device removed [ 141.558] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/ieee80211/phy2/input11/event8" [ 141.558] (II) XINPUT: Adding extended input device "phy2 WPS Button" (type: KEYBOARD, id 13) [ 141.558] (**) Option "xkb_model" "pc105" [ 141.558] (**) Option "xkb_layout" "us,gr" [ 141.558] (**) Option "xkb_variant" ",simple" [ 141.558] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp" [ 141.568] (II) event8 - phy2 WPS Button: is tagged by udev as: Keyboard [ 141.568] (II) event8 - phy2 WPS Button: device is a keyboard [ 1288.728] (II) NOUVEAU(0): EDID vendor "KPM", prod id 0 [ 1288.728] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 1288.728] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)- This reply was modified 3 years, 6 months ago by andfree.
In reply to: cant get i915 drivers
rmcg
Thankyou Anticapitalista for taking a look at this, I have removed some IP/MAC addresses and UUID details but everything else is included:-)
Host: robshp Kernel: 4.9.87-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 6.3.0
parameters: BOOT_IMAGE=/boot/vmlinuz-4.9.87-antix.1-amd64-smp
root=UUID= vga=791 gfxsave quiet
Desktop: IceWM 1.4.2 info: icewmtray dm: SLiM 1.3.4
Distro: antiX-17.1_x64-full Heather Heyer 17 March 2018
base: Debian GNU/Linux 9 (stretch)
Machine:
Type: Laptop System: Hewlett-Packard product: HP EliteBook 2760p v: A0005F02
serial: <root required> Chassis: type: 10 serial: <root required>
Mobo: Hewlett-Packard model: 162A v: KBC Version 05.41 serial: <root required>
BIOS: Hewlett-Packard v: 68SOU Ver. F.60 date: 03/20/2015
Battery:
ID-1: BAT0 charge: 17.4 Wh condition: 35.4/35.4 Wh (100%) volts: 11.1/10.8
model: Hewlett-Packard Primary type: Li-ion serial: 00883 2011/06/24
status: Discharging
Memory:
RAM: total: 7.71 GiB used: 1.12 GiB (14.5%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Dual Core model: Intel Core i5-2540M bits: 64 type: MT MCP
arch: Sandy Bridge family: 6 model-id: 2A (42) stepping: 7 microcode: 1A
L2 cache: 3072 KiB bogomips: 20762
Speed: 1454 MHz min/max: 800/3300 MHz Core speeds (MHz): 1: 1187 2: 1244 3: 1683
4: 2145
Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov constant_tsc
cx16 cx8 de ds_cpl dtes64 dtherm dts eagerfpu epb ept est flexpriority fpu fxsr ht
ida kaiser lahf_lm lm mca mce mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe
pcid pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pts rdtscp rep_good sep smx ss
sse sse2 sse4_1 sse4_2 ssse3 syscall tm tm2 tpr_shadow tsc tsc_deadline_timer vme
vmx vnmi vpid x2apic xsave xsaveopt xtopology xtpr
Vulnerabilities: Type: meltdown mitigation: PTI
Type: spectre_v1 mitigation: __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline
Graphics:
Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
vendor: Hewlett-Packard driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0126
Display: server: X.Org 1.19.2 driver: modesetting unloaded: fbdev,vesa
resolution: 1280×800~60Hz
OpenGL: renderer: Mesa DRI Intel Sandybridge Mobile v: 3.3 Mesa 13.0.6 compat-v: 3.0
direct render: Yes
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:1c20
Sound Server: ALSA v: k4.9.87-antix.1-amd64-smp
Network:
Device-1: Intel 82579LM Gigabit Network vendor: Hewlett-Packard driver: e1000e
v: 3.2.6-k port: 4060 bus ID: 00:19.0 chip ID: 8086:1502
IF: eth3 state: down mac:
Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi v: kernel
port: 4040 bus ID: 24:00.0 chip ID: 8086:0085
IF: wlan3 state: up mac:
IP v4: scope: global broadcast:
IP v6: scope: link
Device-3: HP hs2340 HSPA+ mobile broadband type: USB driver: cdc_acm,cdc_ncm,cdc_wdm
bus ID: 1-1.2:4 chip ID: 03f0:3a1d serial: B85E16D06728C410
IF: usb0 state: down mac:
WAN IP:
Drives:
Local Storage: total: 111.79 GiB used: 21.18 GiB (18.9%)
ID-1: /dev/sda vendor: Samsung model: SSD 840 Series size: 111.79 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: S14CNEACC14669V rev: 7B0Q
scheme: MBR
Message: No Optical or Floppy data was found.
RAID:
Message: No RAID data was found.
Partition:
ID-1: / raw size: 103.00 GiB size: 100.88 GiB (97.95%) used: 21.18 GiB (21.0%)
fs: ext4 dev: /dev/sda1 label: rootantiX17.4.1
uuid: 240c1a4a-77d6-4230-b172-0cc11d304c00
ID-2: swap-1 size: 8.79 GiB used: 0 KiB (0.0%) fs: swap swappiness: 10 (default 60)
cache pressure: 50 (default 100) dev: /dev/sda2 label: swap
uuid: 9eef3a56-1747-4e57-b17e-d061f28a5320
Unmounted:
Message: No unmounted partitions found.
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip ID: 8087:0024
Device-1: 1-1.1:3 info: Validity Sensors VFS471 Fingerprint Reader
type: <vendor specific> driver: N/A interfaces: 1 rev: 1.1 speed: 12 Mb/s
chip ID: 138a:003c serial: 0020fceb1189
Device-2: 1-1.2:4 info: HP hs2340 HSPA+ mobile broadband
type: Communication,Abstract (modem),CDC-Data driver: cdc_acm,cdc_ncm,cdc_wdm
interfaces: 11 rev: 2.0 speed: 480 Mb/s chip ID: 03f0:3a1d serial: B85E16D06728C410
Hub: 2-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0
speed: 480 Mb/s chip ID: 8087:0024
Device-3: 2-1.4:3 info: Chicony type: Video driver: uvcvideo interfaces: 2 rev: 2.0
speed: 480 Mb/s chip ID: 04f2:b242 serial: SN0001
Sensors:
System Temperatures: cpu: 49.0 C mobo: 0.0 C
Fan Speeds (RPM): N/A
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://mx.debian.nz/antix/stretch stretch main nosystemd nonfree
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://mirror.fsmg.org.nz/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://mirror.fsmg.org.nz/debian/ stretch non-free contrib main
2: deb http://security.debian.org/ stretch/updates non-free contrib main
No active apt repos in: /etc/apt/sources.list.d/google-chrome.list
No active apt repos in: /etc/apt/sources.list.d/onion.list
Active apt repos in: /etc/apt/sources.list.d/opera-stable.list
1: deb https://deb.opera.com/opera-stable/ stable non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
1: deb http://repo.vivaldi.com/stable/deb/ stable main
Processes:
CPU top: 5
1: cpu: 27.2% command: chrome pid: 12680 mem: 147.5 MiB (1.8%)
2: cpu: 8.4% command: dropbox pid: 9452 mem: 291.7 MiB (3.6%)
3: cpu: 5.3% command: google-chrome-stable pid: 3332 mem: 253.1 MiB (3.2%)
4: cpu: 3.0% command: lxterminal pid: 13012 mem: 20.4 MiB (0.2%)
5: cpu: 2.8% command: xorg pid: 2387 mem: 54.1 MiB (0.6%)
Memory top: 5
1: mem: 291.7 MiB (3.6%) command: dropbox pid: 9452 cpu: 8.4%
2: mem: 253.1 MiB (3.2%) command: google-chrome-stable pid: 3332 cpu: 5.3%
3: mem: 173.1 MiB (2.1%) command: chrome pid: 3429 cpu: 0.6%
4: mem: 156.2 MiB (1.9%) command: chrome pid: 3612 cpu: 0.5%
5: mem: 147.5 MiB (1.8%) command: chrome pid: 12680 cpu: 27.2%
Info:
Processes: 214 Uptime: 38m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers:
gcc: 6.3.0 alt: 6 Shell: bash v: 4.4.12 running in: lxterminal inxi: 3.0.36In reply to: black screen system hang before login
megawatt
no such file on live or installed HDD.
inxi -v8 as requested:
System: Host: antix1 Kernel: 4.9.193-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 8.3.0 parameters: vga=791 quiet splasht disable=lxF Desktop: IceWM 1.5.5+git20190610 dm: SLiM 1.3.6 Distro: antiX-19_x64-full Marielle Franco 16 October 2019 base: Debian GNU/Linux 10 (buster) Machine: Type: Desktop System: Dell product: Inspiron 580 v: N/A serial: J6G5R4J Chassis: type: 3 serial: J6G5R4J Mobo: Dell model: 033FF6 v: A00 serial: ..CN7360403500JW. BIOS: Dell v: A07 date: 11/13/2010 Memory: RAM: total: 7.67 GiB used: 551.0 MiB (7.0%) Array-1: capacity: 16 GiB slots: 4 EC: None max module size: 4 GiB note: est. Device-1: DIMM1 size: 2 GiB speed: 1333 MT/s type: Other detail: synchronous bus width: 64 bits total: Unknown manufacturer: Elpida part-no: EBJ21UE8BDF0-DJ-F serial: 22163AF4 Device-2: DIMM2 size: 2 GiB speed: 1333 MT/s type: Other detail: synchronous bus width: 64 bits total: Unknown manufacturer: Elpida part-no: EBJ21UE8BDF0-DJ-F serial: 22163ADB Device-3: DIMM3 size: 2 GiB speed: 1333 MT/s type: Other detail: synchronous bus width: 64 bits total: Unknown manufacturer: Elpida part-no: EBJ21UE8BDF0-DJ-F serial: 22163ADA Device-4: DIMM4 size: 2 GiB speed: 1333 MT/s type: Other detail: synchronous bus width: 64 bits total: Unknown manufacturer: Elpida part-no: EBJ21UE8BDF0-DJ-F serial: 22163B07 PCI Slots: Slot: 1 type: 32-bit PCI PCI1 status: In Use length: Short Slot: 2 type: x1 PCI Express PCIE1 status: Available length: Short Slot: 3 type: x1 PCI Express PCIE2 status: Available length: Short Slot: 4 type: x16 PCI Express PCIE3 status: In Use length: Long CPU: Topology: Dual Core model: Intel Core i3 530 bits: 64 type: MT MCP arch: Nehalem family: 6 model-id: 25 (37) stepping: 2 microcode: 11 L1 cache: 128 KiB L2 cache: 4096 KiB L3 cache: 4096 KiB bogomips: 23407 Speed: 1200 MHz min/max: 1200/2933 MHz Core speeds (MHz): 1: 1733 2: 1200 3: 1333 4: 1467 Flags: acpi aperfmperf apic arat arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts ept est flexpriority fpu fxsr ht kaiser lahf_lm lm mca mce mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pdcm pebs pge pni popcnt pse pse36 rdtscp rep_good sep ss sse sse2 sse4_1 sse4_2 ssse3 syscall tm tm2 tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr Vulnerabilities: Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable Type: meltdown mitigation: PTI Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling Graphics: Device-1: AMD Cedar [Radeon HD 5000/6000/7350/8350 Series] vendor: Dell XPS 8300 driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:68f9 Display: server: X.Org 1.20.4 driver: ati,radeon unloaded: fbdev,modesetting,vesa resolution: 2048x1152~60Hz OpenGL: renderer: AMD CEDAR (DRM 2.49.0 / 4.9.193-antix.1-amd64-smp LLVM 7.0.1) v: 3.3 Mesa 18.3.6 compat-v: 3.1 direct render: Yes Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3b56 Device-2: AMD Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] vendor: Dell XPS 8300 driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 1002:aa68 Sound Server: ALSA v: k4.9.193-antix.1-amd64-smp Network: Device-1: Accton SMC2-1211TX driver: 8139too v: 0.9.28 port: e800 bus ID: 04:01.0 chip ID: 1113:1211 IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: 00:e0:29:4c:70:35 IP v4: 192.168.1.168/24 scope: global broadcast: 192.168.1.255 IP v6: 2a00:23c6:7606:1801:2e0:29ff:fe4c:7035/64 type: dynamic mngtmpaddr scope: global IP v6: fe80::2e0:29ff:fe4c:7035/64 scope: link WAN IP: 86.139.117.0 Drives: Local Storage: total: 946.46 GiB used: 38.8 MiB (0.0%) ID-1: /dev/sda vendor: Samsung model: HD103SJ size: 931.51 GiB block size: physical: 512 B logical: 512 B speed: 3.0 Gb/s rotation: 7200 rpm serial: S26BJDWZ116836 rev: 0001 scheme: MBR ID-2: /dev/sdb type: USB vendor: SanDisk model: Cruzer size: 14.95 GiB block size: physical: 512 B logical: 512 B serial: 4317001B524259A8 rev: 8.01 scheme: MBR Optical-1: /dev/sr0 vendor: TSSTcorp model: DVD+-RW TS-H653G rev: DW10 dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 48 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running RAID: Message: No RAID data was found. Partition: ID-1: / raw size: N/A size: 6.10 GiB used: 35.7 MiB (0.6%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-2: /live/boot-dev raw size: 1.08 GiB size: N/A (hidden?) used: N/A (hidden?) fs: iso9660 dev: /dev/sdb1 label: antiX-Live uuid: 2019-10-16-12-48-56-00 ID-3: /live/linux raw size: 1.05 GiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A ID-4: /media/EFI-LIVE raw size: 3.1 MiB size: 3.1 MiB (99.31%) used: 3.1 MiB (99.3%) fs: vfat block size: 512 B dev: /dev/sdb2 label: EFI-LIVE uuid: 6CFD-B910 ID-5: swap-1 size: 55.34 GiB used: 0 KiB (0.0%) fs: swap swappiness: 10 (default 60) cache pressure: 50 (default 100) dev: /dev/sda6 label: swap uuid: a5d09780-3906-4097-b15d-5f49ddc86eb5 Unmounted: ID-1: /dev/sda1 size: 117.6 MiB fs: vfat label: N/A uuid: 07DA-0507 ID-2: /dev/sda2 size: 10.98 GiB fs: ntfs label: RECOVERY uuid: E270176570173FA9 ID-3: /dev/sda3 size: 474.14 GiB fs: ntfs label: OS uuid: 32181A9C181A5F63 ID-4: /dev/sda4 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-5: /dev/sda5 size: 390.94 GiB fs: ext4 label: rootantiX19 uuid: 78793f7e-7ca8-4b2e-a8ba-e063a9ff1084 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip ID: 8087:0020 Device-1: 1-1.3:3 info: N/A type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 045e:0748 Device-2: 1-1.4:4 info: N/A type: Keyboard,HID driver: microsoft,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:00db Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 2-1:2 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 8087:0020 Device-3: 2-1.2:3 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 058f:6362 serial: 058F63626420 Device-4: 2-1.3:4 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0781:5406 serial: 4317001B524259A8 Sensors: System Temperatures: cpu: 38.0 C mobo: N/A gpu: radeon temp: 56 C Fan Speeds (RPM): cpu: 972 fan-2: 761 Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://la.mxrepo.com/antix/buster buster main nonfree Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.us.debian.org/debian/ buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.us.debian.org/debian/ buster main contrib non-free 2: deb http://security.debian.org/ buster/updates main contrib non-free No active apt repos in: /etc/apt/sources.list.d/onion.list No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 1: cpu: 32.7% command: firefox-esr pid: 5752 mem: 237.8 MiB (3.0%) 2: cpu: 17.7% command: firefox-esr pid: 5704 mem: 321.4 MiB (4.0%) 3: cpu: 5.3% command: xorg pid: 4378 mem: 75.9 MiB (0.9%) 4: cpu: 1.1% command: rox pid: 4713 mem: 66.3 MiB (0.8%) 5: cpu: 1.0% command: roxterm pid: 6209 mem: 28.0 MiB (0.3%) Memory top: 5 1: mem: 321.4 MiB (4.0%) command: firefox-esr pid: 5704 cpu: 17.7% 2: mem: 237.8 MiB (3.0%) command: firefox-esr pid: 5752 cpu: 32.7% 3: mem: 85.6 MiB (1.0%) command: firefox-esr pid: 5805 cpu: 0.1% 4: mem: 75.9 MiB (0.9%) command: xorg pid: 4378 cpu: 5.3% 5: mem: 66.3 MiB (0.8%) command: rox pid: 4713 cpu: 1.1% Info: Processes: 146 Uptime: 5m Init: SysVinit v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash (sudo) v: 5.0.3 running in: roxterm inxi: 3.0.36And /var/log/Xorg.0.log from live:
[ 11.889] X.Org X Server 1.20.4 X Protocol Version 11, Revision 0 [ 11.889] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian [ 11.889] Current Operating System: Linux antix1 4.9.193-antix.1-amd64-smp #1 SMP PREEMPT Fri Sep 20 20:30:09 BST 2019 x86_64 [ 11.889] Kernel command line: vga=791 quiet splasht disable=lxF [ 11.889] Build Date: 05 March 2019 08:11:12PM [ 11.889] xorg-server 2:1.20.4-1 (https://www.debian.org/support) [ 11.889] Current version of pixman: 0.36.0 [ 11.889] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 11.889] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 11.889] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 8 10:55:01 2019 [ 11.890] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 11.890] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 11.897] (==) No Layout section. Using the first Screen section. [ 11.897] (==) No screen section available. Using defaults. [ 11.897] (**) |-->Screen "Default Screen Section" (0) [ 11.897] (**) | |-->Monitor "<default monitor>" [ 11.898] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 11.898] (==) Automatically adding devices [ 11.898] (==) Automatically enabling devices [ 11.898] (==) Automatically adding GPU devices [ 11.898] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 11.905] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 11.905] Entry deleted from font path. [ 11.908] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 11.908] Entry deleted from font path. [ 11.909] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 11.909] Entry deleted from font path. [ 11.909] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 11.909] (==) ModulePath set to "/usr/lib/xorg/modules" [ 11.909] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 11.909] (II) Loader magic: 0x562397bd6e20 [ 11.909] (II) Module ABI versions: [ 11.909] X.Org ANSI C Emulation: 0.4 [ 11.909] X.Org Video Driver: 24.0 [ 11.909] X.Org XInput driver : 24.1 [ 11.909] X.Org Server Extension : 10.0 [ 11.909] (++) using VT number 7 [ 11.909] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 11.909] (II) xfree86: Adding drm device (/dev/dri/card0) [ 11.913] (--) PCI:*(1@0:0:0) 1002:68f9:1028:010e rev 0, Mem @ 0xd0000000/268435456, 0xfbee0000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072 [ 11.913] (II) LoadModule: "glx" [ 11.914] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 11.961] (II) Module glx: vendor="X.Org Foundation" [ 11.961] compiled for 1.20.4, module version = 1.0.0 [ 11.961] ABI class: X.Org Server Extension, version 10.0 [ 11.961] (II) Applying OutputClass "Radeon" to /dev/dri/card0 [ 11.961] loading driver: radeon [ 11.961] (==) Matched radeon as autoconfigured driver 0 [ 11.961] (==) Matched ati as autoconfigured driver 1 [ 11.961] (==) Matched modesetting as autoconfigured driver 2 [ 11.961] (==) Matched fbdev as autoconfigured driver 3 [ 11.961] (==) Matched vesa as autoconfigured driver 4 [ 11.961] (==) Assigned the driver to the xf86ConfigLayout [ 11.961] (II) LoadModule: "radeon" [ 11.961] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 11.990] (II) Module radeon: vendor="X.Org Foundation" [ 11.990] compiled for 1.20.4, module version = 19.0.1 [ 11.990] Module class: X.Org Video Driver [ 11.990] ABI class: X.Org Video Driver, version 24.0 [ 11.990] (II) LoadModule: "ati" [ 11.990] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 11.991] (II) Module ati: vendor="X.Org Foundation" [ 11.991] compiled for 1.20.4, module version = 19.0.1 [ 11.991] Module class: X.Org Video Driver [ 11.991] ABI class: X.Org Video Driver, version 24.0 [ 11.991] (II) LoadModule: "modesetting" [ 11.991] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 11.995] (II) Module modesetting: vendor="X.Org Foundation" [ 11.995] compiled for 1.20.4, module version = 1.20.4 [ 11.995] Module class: X.Org Video Driver [ 11.995] ABI class: X.Org Video Driver, version 24.0 [ 11.995] (II) LoadModule: "fbdev" [ 11.995] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 11.997] (II) Module fbdev: vendor="X.Org Foundation" [ 11.997] compiled for 1.20.0, module version = 0.5.0 [ 11.997] Module class: X.Org Video Driver [ 11.997] ABI class: X.Org Video Driver, version 24.0 [ 11.997] (II) LoadModule: "vesa" [ 11.997] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 12.003] (II) Module vesa: vendor="X.Org Foundation" [ 12.003] compiled for 1.20.1, module version = 2.4.0 [ 12.003] Module class: X.Org Video Driver [ 12.003] ABI class: X.Org Video Driver, version 24.0 [ 12.003] (II) RADEON: Driver for ATI/AMD Radeon chipsets: ATI Radeon Mobility X600 (M24), ATI FireMV 2400, ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL, ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380), ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4), ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE, ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE, ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360, ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW, ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2), ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000, ATI Radeon X800 (R420), ATI Radeon X800PRO (R420), ATI Radeon X800SE (R420), ATI FireGL X3 (R420), ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420), ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420), ATI Radeon X850 (R480), ATI Radeon X850 XT (R480), ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480), ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7, ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6, ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9), ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1, ATI Radeon 9800PRO, ATI Radeon 9800XT, ATI Radeon Mobility 9600/9700 (M10/M11), ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11), ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11), ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100, ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000, ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C), ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423), ATI Radeon X800LE (R423), ATI Radeon X800SE (R423), ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430), ATI Radeon X800 SE (R430), ATI Radeon X800 (R430), ATI FireGL V7100 (R423), ATI FireGL V5100 (R423), ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26), ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26), ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5), ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200, ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200, ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370), ATI Radeon X600 (RV370), ATI Radeon X550 (RV370), ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370), ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28), ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28), ATI Radeon X850, ATI unknown Radeon / FireGL (R480), ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410), ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410), ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410), ATI Radeon X1800, ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100, ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300, ATI FireGL V3350, ATI Mobility Radeon X1450, ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT, ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300, ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor, ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570, ATI FireGL V7400, ATI Radeon 9100 PRO IGP, ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2, ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98, ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670, ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600, ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830, ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740, ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610, ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870, ATI Mobility Radeon HD 3850, ATI Radeon HD3850, ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630, ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470, ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700, ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT, ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700, ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2, ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics, AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS, ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370, AMD Firestream 9350, ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series, ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570, ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270, ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS, AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS, ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI, MULLINS, KAVERI, HAWAII [ 12.004] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 12.004] (II) FBDEV: driver for framebuffer: fbdev [ 12.004] (II) VESA: driver for VESA chipsets: vesa [ 12.010] (II) [KMS] Kernel modesetting enabled. [ 12.010] (WW) Falling back to old probe method for modesetting [ 12.010] (WW) Falling back to old probe method for fbdev [ 12.010] (II) Loading sub module "fbdevhw" [ 12.010] (II) LoadModule: "fbdevhw" [ 12.011] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 12.014] (II) Module fbdevhw: vendor="X.Org Foundation" [ 12.014] compiled for 1.20.4, module version = 0.0.2 [ 12.014] ABI class: X.Org Video Driver, version 24.0 [ 12.015] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 12.015] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 [ 12.015] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 12.015] (==) RADEON(0): Default visual is TrueColor [ 12.015] (==) RADEON(0): RGB weight 888 [ 12.015] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [ 12.015] (--) RADEON(0): Chipset: "ATI Radeon HD 5450" (ChipID = 0x68f9) [ 12.015] (II) Loading sub module "fb" [ 12.015] (II) LoadModule: "fb" [ 12.015] (II) Loading /usr/lib/xorg/modules/libfb.so [ 12.020] (II) Module fb: vendor="X.Org Foundation" [ 12.020] compiled for 1.20.4, module version = 1.0.0 [ 12.020] ABI class: X.Org ANSI C Emulation, version 0.4 [ 12.020] (II) Loading sub module "dri2" [ 12.020] (II) LoadModule: "dri2" [ 12.020] (II) Module "dri2" already built-in [ 12.847] (II) Loading sub module "glamoregl" [ 12.847] (II) LoadModule: "glamoregl" [ 12.848] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 12.861] (II) Module glamoregl: vendor="X.Org Foundation" [ 12.861] compiled for 1.20.4, module version = 1.0.1 [ 12.861] ABI class: X.Org ANSI C Emulation, version 0.4 [ 12.931] (II) RADEON(0): glamor X acceleration enabled on AMD CEDAR (DRM 2.49.0 / 4.9.193-antix.1-amd64-smp, LLVM 7.0.1) [ 12.931] (II) RADEON(0): glamor detected, initialising EGL layer. [ 12.931] (II) RADEON(0): KMS Color Tiling: enabled [ 12.931] (II) RADEON(0): KMS Color Tiling 2D: enabled [ 12.931] (==) RADEON(0): TearFree property default: auto [ 12.931] (II) RADEON(0): KMS Pageflipping: enabled [ 12.988] (II) RADEON(0): Output HDMI-0 has no monitor section [ 12.996] (II) RADEON(0): Output DVI-0 has no monitor section [ 13.004] (II) RADEON(0): Output VGA-0 has no monitor section [ 13.061] (II) RADEON(0): EDID for output HDMI-0 [ 13.061] (II) RADEON(0): Manufacturer: DEL Model: d070 Serial#: 808536908 [ 13.061] (II) RADEON(0): Year: 2015 Week: 46 [ 13.061] (II) RADEON(0): EDID Version: 1.3 [ 13.061] (II) RADEON(0): Digital Display Input [ 13.061] (II) RADEON(0): Max Image Size [cm]: horiz.: 55 vert.: 31 [ 13.061] (II) RADEON(0): Gamma: 2.20 [ 13.061] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off [ 13.062] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 13.062] (II) RADEON(0): Default color space is primary color space [ 13.062] (II) RADEON(0): First detailed timing is preferred mode [ 13.062] (II) RADEON(0): redX: 0.661 redY: 0.332 greenX: 0.302 greenY: 0.613 [ 13.062] (II) RADEON(0): blueX: 0.149 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 13.062] (II) RADEON(0): Supported established timings: [ 13.062] (II) RADEON(0): 720x400@70Hz [ 13.062] (II) RADEON(0): 640x480@60Hz [ 13.062] (II) RADEON(0): 640x480@75Hz [ 13.062] (II) RADEON(0): 800x600@60Hz [ 13.062] (II) RADEON(0): 800x600@75Hz [ 13.062] (II) RADEON(0): 1024x768@60Hz [ 13.062] (II) RADEON(0): 1024x768@75Hz [ 13.062] (II) RADEON(0): 1280x1024@75Hz [ 13.062] (II) RADEON(0): Manufacturer's mask: 0 [ 13.062] (II) RADEON(0): Supported standard timings: [ 13.062] (II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 13.062] (II) RADEON(0): #1: hsize: 1920 vsize 1200 refresh: 60 vid: 209 [ 13.062] (II) RADEON(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 13.062] (II) RADEON(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 13.062] (II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 13.062] (II) RADEON(0): #5: hsize: 1200 vsize 960 refresh: 60 vid: 32887 [ 13.062] (II) RADEON(0): Supported detailed timing: [ 13.062] (II) RADEON(0): clock: 241.5 MHz Image Size: 553 x 311 mm [ 13.062] (II) RADEON(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 13.062] (II) RADEON(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0 [ 13.062] (II) RADEON(0): Serial No: 9X2VY5B901KL [ 13.062] (II) RADEON(0): Monitor name: DELL U2515H [ 13.062] (II) RADEON(0): Ranges: V min: 56 V max: 86 Hz, H min: 30 H max: 113 kHz, PixClock max 305 MHz [ 13.062] (II) RADEON(0): Supported detailed timing: [ 13.062] (II) RADEON(0): clock: 148.5 MHz Image Size: 553 x 311 mm [ 13.062] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 13.062] (II) RADEON(0): v_active: 1080 v_sync: 1082 v_sync_end 1087 v_blanking: 1125 v_border: 0 [ 13.062] (II) RADEON(0): Supported detailed timing: [ 13.062] (II) RADEON(0): clock: 74.2 MHz Image Size: 553 x 311 mm [ 13.062] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 13.062] (II) RADEON(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0 [ 13.062] (II) RADEON(0): Supported detailed timing: [ 13.062] (II) RADEON(0): clock: 74.2 MHz Image Size: 553 x 311 mm [ 13.062] (II) RADEON(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 [ 13.062] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 13.062] (II) RADEON(0): Supported detailed timing: [ 13.062] (II) RADEON(0): clock: 27.0 MHz Image Size: 553 x 311 mm [ 13.062] (II) RADEON(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0 [ 13.062] (II) RADEON(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0 [ 13.062] (II) RADEON(0): Supported detailed timing: [ 13.062] (II) RADEON(0): clock: 162.0 MHz Image Size: 553 x 311 mm [ 13.062] (II) RADEON(0): h_active: 2048 h_sync: 2074 h_sync_end 2154 h_blank_end 2250 h_border: 0 [ 13.062] (II) RADEON(0): v_active: 1152 v_sync: 1153 v_sync_end 1156 v_blanking: 1200 v_border: 0 [ 13.062] (II) RADEON(0): Number of EDID sections to follow: 1 [ 13.062] (II) RADEON(0): EDID (in hex): [ 13.062] (II) RADEON(0): 00ffffffffffff0010ac70d04c4b3130 [ 13.062] (II) RADEON(0): 2e19010380371f78ee4455a9554d9d26 [ 13.062] (II) RADEON(0): 0f5054a54b00b300d100714fa9408180 [ 13.062] (II) RADEON(0): 778001010101565e00a0a0a029503020 [ 13.062] (II) RADEON(0): 350029372100001a000000ff00395832 [ 13.062] (II) RADEON(0): 565935423930314b4c0a000000fc0044 [ 13.062] (II) RADEON(0): 454c4c205532353135480a20000000fd [ 13.062] (II) RADEON(0): 0038561e711e000a20202020202001f4 [ 13.062] (II) RADEON(0): 020322f14f1005040302071601141f12 [ 13.062] (II) RADEON(0): 13202122230907078301000065030c00 [ 13.062] (II) RADEON(0): 1000023a801871382d40582c25002937 [ 13.062] (II) RADEON(0): 2100001e011d8018711c1620582c2500 [ 13.062] (II) RADEON(0): 29372100009e011d007251d01e206e28 [ 13.062] (II) RADEON(0): 550029372100001e8c0ad08a20e02d10 [ 13.062] (II) RADEON(0): 103e9600293721000018483f00ca8080 [ 13.062] (II) RADEON(0): 30401a50130029372100001e000000ed [ 13.062] (II) RADEON(0): Printing probed modes for output HDMI-0 [ 13.062] (II) RADEON(0): Modeline "2048x1152"x60.0 162.00 2048 2074 2154 2250 1152 1153 1156 1200 +hsync +vsync (72.0 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1082 1087 1125 +hsync +vsync (67.5 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080"x25.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e) [ 13.062] (II) RADEON(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 13.062] (II) RADEON(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 13.062] (II) RADEON(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 13.062] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 13.062] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 13.062] (II) RADEON(0): Modeline "1200x960"x60.0 95.40 1200 1272 1400 1600 960 961 964 994 -hsync +vsync (59.6 kHz) [ 13.062] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 13.062] (II) RADEON(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 13.062] (II) RADEON(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 13.062] (II) RADEON(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 13.062] (II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 13.062] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 13.062] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 13.062] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 13.062] (II) RADEON(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 13.062] (II) RADEON(0): Modeline "720x576i"x50.0 13.50 720 732 795 864 576 580 586 625 interlace -hsync -vsync (15.6 kHz e) [ 13.062] (II) RADEON(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 13.062] (II) RADEON(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 13.062] (II) RADEON(0): Modeline "720x480i"x60.0 13.51 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.8 kHz e) [ 13.062] (II) RADEON(0): Modeline "720x480i"x59.9 13.50 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.7 kHz e) [ 13.062] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 13.062] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 13.062] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 13.062] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 13.070] (II) RADEON(0): EDID for output DVI-0 [ 13.078] (II) RADEON(0): EDID for output VGA-0 [ 13.078] (II) RADEON(0): Output HDMI-0 connected [ 13.078] (II) RADEON(0): Output DVI-0 disconnected [ 13.078] (II) RADEON(0): Output VGA-0 disconnected [ 13.078] (II) RADEON(0): Using exact sizes for initial modes [ 13.078] (II) RADEON(0): Output HDMI-0 using initial mode 2048x1152 +0+0 [ 13.078] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:40000000 visible:f3b3000 [ 13.078] (==) RADEON(0): DPI set to (96, 96) [ 13.078] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) [ 13.078] (II) Loading sub module "ramdac" [ 13.078] (II) LoadModule: "ramdac" [ 13.078] (II) Module "ramdac" already built-in [ 13.078] (II) UnloadModule: "modesetting" [ 13.078] (II) Unloading modesetting [ 13.078] (II) UnloadModule: "fbdev" [ 13.078] (II) Unloading fbdev [ 13.078] (II) UnloadSubModule: "fbdevhw" [ 13.078] (II) Unloading fbdevhw [ 13.078] (II) UnloadModule: "vesa" [ 13.078] (II) Unloading vesa [ 13.081] (II) RADEON(0): [DRI2] Setup complete [ 13.081] (II) RADEON(0): [DRI2] DRI driver: r600 [ 13.081] (II) RADEON(0): [DRI2] VDPAU driver: r600 [ 13.081] (II) RADEON(0): Front buffer size: 9216K [ 13.081] (II) RADEON(0): VRAM usage limit set to 216241K [ 13.088] (II) RADEON(0): SYNC extension fences enabled [ 13.088] (II) RADEON(0): Present extension enabled [ 13.089] (==) RADEON(0): DRI3 enabled [ 13.089] (==) RADEON(0): Backing store enabled [ 13.089] (II) RADEON(0): Direct rendering enabled [ 13.140] (II) RADEON(0): Use GLAMOR acceleration. [ 13.140] (II) RADEON(0): Acceleration enabled [ 13.140] (==) RADEON(0): DPMS enabled [ 13.140] (==) RADEON(0): Silken mouse enabled [ 13.140] (II) RADEON(0): Set up textured video (glamor) [ 13.142] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video. [ 13.142] (II) RADEON(0): [XvMC] Extension initialized. [ 13.142] (II) Initializing extension Generic Event Extension [ 13.142] (II) Initializing extension SHAPE [ 13.143] (II) Initializing extension MIT-SHM [ 13.143] (II) Initializing extension XInputExtension [ 13.143] (II) Initializing extension XTEST [ 13.143] (II) Initializing extension BIG-REQUESTS [ 13.143] (II) Initializing extension SYNC [ 13.143] (II) Initializing extension XKEYBOARD [ 13.143] (II) Initializing extension XC-MISC [ 13.143] (II) Initializing extension SECURITY [ 13.144] (II) Initializing extension XFIXES [ 13.144] (II) Initializing extension RENDER [ 13.144] (II) Initializing extension RANDR [ 13.144] (II) Initializing extension COMPOSITE [ 13.144] (II) Initializing extension DAMAGE [ 13.144] (II) Initializing extension MIT-SCREEN-SAVER [ 13.144] (II) Initializing extension DOUBLE-BUFFER [ 13.144] (II) Initializing extension RECORD [ 13.145] (II) Initializing extension DPMS [ 13.145] (II) Initializing extension Present [ 13.145] (II) Initializing extension DRI3 [ 13.145] (II) Initializing extension X-Resource [ 13.145] (II) Initializing extension XVideo [ 13.145] (II) Initializing extension XVideo-MotionCompensation [ 13.145] (II) Initializing extension SELinux [ 13.145] (II) SELinux: Disabled on system [ 13.145] (II) Initializing extension GLX [ 13.151] (II) AIGLX: Loaded and initialized r600 [ 13.151] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 13.151] (II) Initializing extension XFree86-VidModeExtension [ 13.151] (II) Initializing extension XFree86-DGA [ 13.151] (II) Initializing extension XFree86-DRI [ 13.151] (II) Initializing extension DRI2 [ 13.152] (II) RADEON(0): Setting screen physical size to 541 x 304 [ 13.289] (II) config/udev: Adding input device Power Button (/dev/input/event6) [ 13.289] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 13.289] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 13.289] (II) LoadModule: "libinput" [ 13.289] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 13.312] (II) Module libinput: vendor="X.Org Foundation" [ 13.312] compiled for 1.20.4, module version = 0.28.2 [ 13.312] Module class: X.Org XInput Driver [ 13.312] ABI class: X.Org XInput driver, version 24.1 [ 13.312] (II) Using input driver 'libinput' for 'Power Button' [ 13.312] (**) Power Button: always reports core events [ 13.312] (**) Option "Device" "/dev/input/event6" [ 13.312] (**) Option "_source" "server/udev" [ 13.325] (II) event6 - Power Button: is tagged by udev as: Keyboard [ 13.325] (II) event6 - Power Button: device is a keyboard [ 13.326] (II) event6 - Power Button: device removed [ 13.342] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event6" [ 13.342] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 13.342] (**) Option "xkb_model" "pc105" [ 13.342] (**) Option "xkb_layout" "us" [ 13.342] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 13.378] (II) event6 - Power Button: is tagged by udev as: Keyboard [ 13.378] (II) event6 - Power Button: device is a keyboard [ 13.379] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 13.379] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 13.379] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 13.379] (II) Using input driver 'libinput' for 'Power Button' [ 13.379] (**) Power Button: always reports core events [ 13.379] (**) Option "Device" "/dev/input/event5" [ 13.379] (**) Option "_source" "server/udev" [ 13.379] (II) event5 - Power Button: is tagged by udev as: Keyboard [ 13.379] (II) event5 - Power Button: device is a keyboard [ 13.379] (II) event5 - Power Button: device removed [ 13.396] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event5" [ 13.396] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 13.396] (**) Option "xkb_model" "pc105" [ 13.396] (**) Option "xkb_layout" "us" [ 13.396] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 13.397] (II) event5 - Power Button: is tagged by udev as: Keyboard [ 13.397] (II) event5 - Power Button: device is a keyboard [ 13.397] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event7) [ 13.397] (II) No input driver specified, ignoring this device. [ 13.397] (II) This device may have been added with another device file. [ 13.398] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver (/dev/input/event2) [ 13.398] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "evdev keyboard catchall" [ 13.398] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "libinput keyboard catchall" [ 13.398] (II) Using input driver 'libinput' for 'Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver' [ 13.398] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: always reports core events [ 13.398] (**) Option "Device" "/dev/input/event2" [ 13.398] (**) Option "_source" "server/udev" [ 13.399] (II) event2 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: is tagged by udev as: Keyboard [ 13.399] (II) event2 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: device is a keyboard [ 13.400] (II) event2 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: device removed [ 13.420] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:0748.0001/input/input4/event2" [ 13.420] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver" (type: KEYBOARD, id 8) [ 13.420] (**) Option "xkb_model" "pc105" [ 13.420] (**) Option "xkb_layout" "us" [ 13.420] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 13.422] (II) event2 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: is tagged by udev as: Keyboard [ 13.422] (II) event2 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: device is a keyboard [ 13.423] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver (/dev/input/event3) [ 13.423] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "evdev pointer catchall" [ 13.423] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "evdev keyboard catchall" [ 13.423] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "libinput pointer catchall" [ 13.423] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "libinput keyboard catchall" [ 13.423] (II) Using input driver 'libinput' for 'Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver' [ 13.423] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: always reports core events [ 13.423] (**) Option "Device" "/dev/input/event3" [ 13.423] (**) Option "_source" "server/udev" [ 13.424] (II) event3 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: is tagged by udev as: Keyboard Mouse [ 13.424] (II) event3 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: device is a pointer [ 13.424] (II) event3 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: device is a keyboard [ 13.425] (II) event3 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: device removed [ 13.444] (II) libinput: Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: needs a virtual subdevice [ 13.444] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:045E:0748.0002/input/input5/event3" [ 13.444] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver" (type: MOUSE, id 9) [ 13.444] (**) Option "AccelerationScheme" "none" [ 13.444] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: (accel) selected scheme none/0 [ 13.444] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: (accel) acceleration factor: 2.000 [ 13.444] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: (accel) acceleration threshold: 4 [ 13.445] (II) event3 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: is tagged by udev as: Keyboard Mouse [ 13.446] (II) event3 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: device is a pointer [ 13.446] (II) event3 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: device is a keyboard [ 13.446] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver (/dev/input/mouse0) [ 13.446] (II) No input driver specified, ignoring this device. [ 13.446] (II) This device may have been added with another device file. [ 13.447] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver (/dev/input/event4) [ 13.447] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "evdev keyboard catchall" [ 13.447] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "libinput keyboard catchall" [ 13.447] (II) Using input driver 'libinput' for 'Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver' [ 13.447] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: always reports core events [ 13.447] (**) Option "Device" "/dev/input/event4" [ 13.447] (**) Option "_source" "server/udev" [ 13.449] (II) event4 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: is tagged by udev as: Keyboard [ 13.449] (II) event4 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: device is a keyboard [ 13.449] (II) event4 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: device removed [ 13.468] (II) libinput: Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: needs a virtual subdevice [ 13.468] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:045E:0748.0003/input/input6/event4" [ 13.468] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver" (type: MOUSE, id 10) [ 13.468] (**) Option "AccelerationScheme" "none" [ 13.468] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: (accel) selected scheme none/0 [ 13.468] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: (accel) acceleration factor: 2.000 [ 13.468] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: (accel) acceleration threshold: 4 [ 13.469] (II) event4 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: is tagged by udev as: Keyboard [ 13.469] (II) event4 - Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: device is a keyboard [ 13.470] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event0) [ 13.470] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall" [ 13.470] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall" [ 13.470] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000' [ 13.470] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events [ 13.470] (**) Option "Device" "/dev/input/event0" [ 13.470] (**) Option "_source" "server/udev" [ 13.471] (II) event0 - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard [ 13.472] (II) event0 - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard [ 13.472] (II) event0 - Microsoft Natural® Ergonomic Keyboard 4000: device removed [ 13.488] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:045E:00DB.0004/input/input2/event0" [ 13.488] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 11) [ 13.488] (**) Option "xkb_model" "pc105" [ 13.488] (**) Option "xkb_layout" "us" [ 13.488] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 13.489] (II) event0 - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard [ 13.489] (II) event0 - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard [ 13.489] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event1) [ 13.490] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall" [ 13.490] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall" [ 13.490] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000' [ 13.490] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events [ 13.490] (**) Option "Device" "/dev/input/event1" [ 13.490] (**) Option "_source" "server/udev" [ 13.491] (II) event1 - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard [ 13.491] (II) event1 - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard [ 13.491] (II) event1 - Microsoft Natural® Ergonomic Keyboard 4000: device removed [ 13.508] (II) libinput: Microsoft Natural® Ergonomic Keyboard 4000: needs a virtual subdevice [ 13.508] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:045E:00DB.0005/input/input3/event1" [ 13.508] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: MOUSE, id 12) [ 13.508] (**) Option "AccelerationScheme" "none" [ 13.508] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) selected scheme none/0 [ 13.508] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration factor: 2.000 [ 13.508] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration threshold: 4 [ 13.510] (II) event1 - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard [ 13.510] (II) event1 - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard [ 13.510] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event8) [ 13.510] (II) No input driver specified, ignoring this device. [ 13.510] (II) This device may have been added with another device file. [ 13.511] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event9) [ 13.511] (II) No input driver specified, ignoring this device. [ 13.511] (II) This device may have been added with another device file. [ 13.511] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event10) [ 13.511] (II) No input driver specified, ignoring this device. [ 13.511] (II) This device may have been added with another device file. [ 13.512] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event11) [ 13.512] (II) No input driver specified, ignoring this device. [ 13.512] (II) This device may have been added with another device file. [ 13.512] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event12) [ 13.512] (II) No input driver specified, ignoring this device. [ 13.512] (II) This device may have been added with another device file. [ 13.513] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event13) [ 13.513] (II) No input driver specified, ignoring this device. [ 13.513] (II) This device may have been added with another device file. [ 13.513] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event14) [ 13.513] (II) No input driver specified, ignoring this device. [ 13.513] (II) This device may have been added with another device file. [ 13.514] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event15) [ 13.514] (II) No input driver specified, ignoring this device. [ 13.514] (II) This device may have been added with another device file. [ 13.514] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event16) [ 13.514] (II) No input driver specified, ignoring this device. [ 13.514] (II) This device may have been added with another device file. [ 13.520] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "evdev pointer catchall" [ 13.520] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "evdev keyboard catchall" [ 13.520] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "libinput pointer catchall" [ 13.520] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "libinput keyboard catchall" [ 13.520] (II) Using input driver 'libinput' for 'Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver' [ 13.520] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: always reports core events [ 13.520] (**) Option "Device" "/dev/input/event3" [ 13.520] (**) Option "_source" "_driver/libinput" [ 13.520] (II) libinput: Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: is a virtual subdevice [ 13.520] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:045E:0748.0002/input/input5/event3" [ 13.520] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver" (type: KEYBOARD, id 13) [ 13.520] (**) Option "xkb_model" "pc105" [ 13.520] (**) Option "xkb_layout" "us" [ 13.520] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 13.520] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "evdev keyboard catchall" [ 13.520] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: Applying InputClass "libinput keyboard catchall" [ 13.520] (II) Using input driver 'libinput' for 'Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver' [ 13.520] (**) Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: always reports core events [ 13.520] (**) Option "Device" "/dev/input/event4" [ 13.520] (**) Option "_source" "_driver/libinput" [ 13.520] (II) libinput: Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver: is a virtual subdevice [ 13.520] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:045E:0748.0003/input/input6/event4" [ 13.520] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SideWinder(TM) 2.4GHz Transceiver" (type: KEYBOARD, id 14) [ 13.520] (**) Option "xkb_model" "pc105" [ 13.520] (**) Option "xkb_layout" "us" [ 13.520] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 13.520] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall" [ 13.520] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall" [ 13.520] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000' [ 13.521] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events [ 13.521] (**) Option "Device" "/dev/input/event1" [ 13.521] (**) Option "_source" "_driver/libinput" [ 13.521] (II) libinput: Microsoft Natural® Ergonomic Keyboard 4000: is a virtual subdevice [ 13.521] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:045E:00DB.0005/input/input3/event1" [ 13.521] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 15) [ 13.521] (**) Option "xkb_model" "pc105" [ 13.521] (**) Option "xkb_layout" "us" [ 13.521] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 16.753] (II) RADEON(0): EDID vendor "DEL", prod id 53360 [ 16.753] (II) RADEON(0): Using EDID range info for horizontal sync [ 16.753] (II) RADEON(0): Using EDID range info for vertical refresh [ 16.753] (II) RADEON(0): Printing DDC gathered Modelines: [ 16.753] (II) RADEON(0): Modeline "2560x1440"x0.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP) [ 16.753] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1082 1087 1125 +hsync +vsync (67.5 kHz e) [ 16.753] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 16.753] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 16.753] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 16.753] (II) RADEON(0): Modeline "2048x1152"x0.0 162.00 2048 2074 2154 2250 1152 1153 1156 1200 +hsync +vsync (72.0 kHz e) [ 16.753] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 16.753] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e) [ 16.753] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e) [ 16.753] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 16.753] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 16.753] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 16.753] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 16.753] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 16.753] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 16.753] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e) [ 16.753] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 16.753] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 16.753] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 16.753] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 16.753] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 16.753] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 16.753] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 16.753] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 16.753] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 16.753] (II) RADEON(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e) [ 16.753] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 16.753] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 16.753] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 16.753] (II) RADEON(0): Modeline "1200x960"x60.0 95.42 1200 1272 1400 1600 960 961 964 994 -hsync +vsync (59.6 kHz e) [ 335.649] (II) RADEON(0): EDID vendor "DEL", prod id 53360 [ 335.649] (II) RADEON(0): Using hsync ranges from config file [ 335.649] (II) RADEON(0): Using vrefresh ranges from config file [ 335.649] (II) RADEON(0): Printing DDC gathered Modelines: [ 335.649] (II) RADEON(0): Modeline "2560x1440"x0.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP) [ 335.649] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1082 1087 1125 +hsync +vsync (67.5 kHz e) [ 335.649] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 335.649] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 335.649] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 335.649] (II) RADEON(0): Modeline "2048x1152"x0.0 162.00 2048 2074 2154 2250 1152 1153 1156 1200 +hsync +vsync (72.0 kHz e) [ 335.649] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 335.649] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e) [ 335.649] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e) [ 335.649] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 335.649] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 335.649] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 335.649] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 335.649] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 335.649] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 335.649] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e) [ 335.649] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 335.649] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 335.649] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 335.649] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 335.649] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 335.649] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 335.649] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 335.649] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 335.649] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 335.649] (II) RADEON(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e) [ 335.649] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 335.649] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 335.649] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 335.649] (II) RADEON(0): Modeline "1200x960"x60.0 95.42 1200 1272 1400 1600 960 961 964 994 -hsync +vsync (59.6 kHz e)- This reply was modified 3 years, 6 months ago by anticapitalista.
In reply to: black screen system hang before login
here is my full sudo inxi -zv8 if it helps:
System:
Host: antixcorei3 Kernel: 5.2.15-antix.1-amd64-smp x86_64 bits: 64
compiler: gcc v: 8.3.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.2.15-antix.1-amd64-smp
root=UUID=78793f7e-7ca8-4b2e-a8ba-e063a9ff1084 ro quiet
Desktop: IceWM 1.5.5+git20190610 dm: SLiM 1.3.6
Distro: antiX-19_x64-full Marielle Franco 16 October 2019
base: Debian GNU/Linux 10 (buster)
Machine:
Type: Desktop System: Dell product: Inspiron 580 v: N/A serial: <filter>
Chassis: type: 3 serial: <filter>
Mobo: Dell model: 033FF6 v: A00 serial: <filter> BIOS: Dell v: A07
date: 11/13/2010
Memory:
RAM: total: 7.66 GiB used: 1.00 GiB (13.1%)
Array-1: capacity: 16 GiB slots: 4 EC: None max module size: 4 GiB
note: est.
Device-1: DIMM1 size: 2 GiB speed: 1333 MT/s type: Other
detail: synchronous bus width: 64 bits total: Unknown manufacturer: Elpida
part-no: EBJ21UE8BDF0-DJ-F serial: <filter>
Device-2: DIMM2 size: 2 GiB speed: 1333 MT/s type: Other
detail: synchronous bus width: 64 bits total: Unknown manufacturer: Elpida
part-no: EBJ21UE8BDF0-DJ-F serial: <filter>
Device-3: DIMM3 size: 2 GiB speed: 1333 MT/s type: Other
detail: synchronous bus width: 64 bits total: Unknown manufacturer: Elpida
part-no: EBJ21UE8BDF0-DJ-F serial: <filter>
Device-4: DIMM4 size: 2 GiB speed: 1333 MT/s type: Other
detail: synchronous bus width: 64 bits total: Unknown manufacturer: Elpida
part-no: EBJ21UE8BDF0-DJ-F serial: <filter>
PCI Slots:
Slot: 1 type: 32-bit PCI PCI1 status: In Use length: Short
Slot: 2 type: x1 PCI Express PCIE1 status: Available length: Short
Slot: 3 type: x1 PCI Express PCIE2 status: Available length: Short
Slot: 4 type: x16 PCI Express PCIE3 status: In Use length: Long
CPU:
Topology: Dual Core model: Intel Core i3 530 bits: 64 type: MT MCP
arch: Nehalem family: 6 model-id: 25 (37) stepping: 2 microcode: 11
L1 cache: 128 KiB L2 cache: 4096 KiB L3 cache: 4096 KiB bogomips: 23408
Speed: 1504 MHz min/max: 1200/2933 MHz Core speeds (MHz): 1: 1246 2: 1226
3: 1204 4: 1226
Flags: acpi aperfmperf apic arat arch_perfmon bts clflush cmov
constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts ept est
flexpriority flush_l1d fpu fxsr ht ibpb ibrs lahf_lm lm mca mce mmx
monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pdcm pebs pge pni popcnt
pse pse36 pti rdtscp rep_good sep ss ssbd sse sse2 sse4_1 sse4_2 ssse3
stibp syscall tm tm2 tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr
Vulnerabilities: Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode;
SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Graphics:
Device-1: AMD Cedar [Radeon HD 5000/6000/7350/8350 Series]
vendor: Dell XPS 8300 driver: radeon v: kernel bus ID: 01:00.0
chip ID: 1002:68f9
Display: server: X.Org 1.20.4 driver: ati,radeon
unloaded: fbdev,modesetting,vesa resolution: 2048×1152~60Hz
OpenGL:
renderer: AMD CEDAR (DRM 2.50.0 / 5.2.15-antix.1-amd64-smp LLVM 7.0.1)
v: 3.3 Mesa 18.3.6 compat-v: 3.1 direct render: Yes
Audio:
Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3b56
Device-2: AMD Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
vendor: Dell XPS 8300 driver: snd_hda_intel v: kernel bus ID: 01:00.1
chip ID: 1002:aa68
Sound Server: ALSA v: k5.2.15-antix.1-amd64-smp
Network:
Device-1: Accton SMC2-1211TX driver: 8139too v: 0.9.28 port: e800
bus ID: 04:01.0 chip ID: 1113:1211
IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> type: dynamic mngtmpaddr scope: global
IP v6: <filter> scope: link
WAN IP: <filter>
Drives:
Local Storage: total: 931.51 GiB used: 5.44 GiB (0.6%)
ID-1: /dev/sda vendor: Samsung model: HD103SJ size: 931.51 GiB block size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s rotation: 7200 rpm
serial: <filter> rev: 0001 scheme: MBR
Optical-1: /dev/sr0 vendor: TSSTcorp model: DVD+-RW TS-H653G rev: DW10
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
RAID:
Message: No RAID data was found.
Partition:
ID-1: / raw size: 390.94 GiB size: 383.80 GiB (98.17%)
used: 5.44 GiB (1.4%) fs: ext4 block size: 4096 B dev: /dev/sda5
label: rootantiX19 uuid: 78793f7e-7ca8-4b2e-a8ba-e063a9ff1084
ID-2: swap-1 size: 55.34 GiB used: 0 KiB (0.0%) fs: swap
swappiness: 10 (default 60) cache pressure: 50 (default 100)
dev: /dev/sda6 label: swap uuid: a5d09780-3906-4097-b15d-5f49ddc86eb5
Unmounted:
ID-1: /dev/sda1 size: 117.6 MiB fs: vfat label: N/A uuid: 07DA-0507
ID-2: /dev/sda2 size: 10.98 GiB fs: ntfs label: RECOVERY
uuid: E270176570173FA9
ID-3: /dev/sda3 size: 474.14 GiB fs: ntfs label: OS uuid: 32181A9C181A5F63
ID-4: /dev/sda4 size: 1 KiB fs: N/A label: N/A uuid: N/A
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 1-1:2 info: Full speed (or root) Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip ID: 8087:0020
Device-1: 1-1.3:3 info: N/A type: Keyboard,Mouse,HID
driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
chip ID: 045e:0748
Device-2: 1-1.4:4 info: N/A type: Keyboard,HID driver: microsoft,usbhid
interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:00db
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 2-1:2 info: Full speed (or root) Hub ports: 8 rev: 2.0
speed: 480 Mb/s chip ID: 8087:0020
Device-3: 2-1.2:3 info: N/A type: Mass Storage driver: usb-storage
interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 058f:6362 serial: <filter>
Sensors:
System Temperatures: cpu: 35.0 C mobo: N/A gpu: radeon temp: 55 C
Fan Speeds (RPM): cpu: 975 fan-2: 821
Repos:
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://mxlinux.mirrors.uk2.net/packages/antix/buster buster main nonfree
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.uk.debian.org/debian/ buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.uk.debian.org/debian/ buster main contrib non-free
2: deb http://security.debian.org/ buster/updates main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.list
Processes:
CPU top: 5
1: cpu: 14.0% command: firefox pid: 3400 mem: 352.6 MiB (4.4%)
2: cpu: 13.1% command: firefox-bin pid: 3659 mem: 569.0 MiB (7.2%)
3: cpu: 5.4% command: firefox-bin pid: 3513 mem: 228.0 MiB (2.9%)
4: cpu: 3.4% command: xorg pid: 2372 mem: 70.8 MiB (0.9%)
5: cpu: 2.5% command: yad pid: 5181 mem: 47.5 MiB (0.6%)
Memory top: 5
1: mem: 569.0 MiB (7.2%) command: firefox-bin pid: 3659 cpu: 13.1%
2: mem: 352.6 MiB (4.4%) command: firefox pid: 3400 cpu: 14.0%
3: mem: 228.0 MiB (2.9%) command: firefox-bin pid: 3513 cpu: 5.4%
4: mem: 124.3 MiB (1.5%) command: firefox-bin pid: 3466 cpu: 0.8%
5: mem: 88.2 MiB (1.1%) command: firefox-bin pid: 3539 cpu: 0.1%
Info:
Processes: 142 Uptime: 16m Init: SysVinit v: 2.93 runlevel: 5 default: 5
Compilers: gcc: 8.3.0 alt: 8 Shell: bash (sudo) v: 5.0.3
running in: roxterm inxi: 3.0.36Hi all,
I’ve installed antix19 on my i3 dell inspiron 580 system and updated the distribution and kernel.
It’s a really great distro IMHO.
But on boot, the system hangs with black screen and frozen cursor
for about 1:30secs before booting into IceWM.Any ideas what is happening? is this normal operation?
System: Host: antixcorei3 Kernel: 5.2.15-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc
v: 8.3.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.2.15-antix.1-amd64-smp
root=UUID=78793f7e-7ca8-4b2e-a8ba-e063a9ff1084 ro quiet
Desktop: IceWM 1.5.5+git20190610 dm: SLiM 1.3.6
Distro: antiX-19_x64-full Marielle Franco 16 October 2019
base: Debian GNU/Linux 10 (buster)
Machine: Type: Desktop System: Dell product: Inspiron 580 v: N/A serial: <filter> Chassis:
type: 3 serial: <filter>
Mobo: Dell model: 033FF6 v: A00 serial: <filter> BIOS: Dell v: A07 date: 11/13/2010
Memory: RAM: total: 7.66 GiB used: 1019.8 MiB (13.0%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots: Permissions: Unable to run dmidecode. Root privileges required.
CPU: Topology: Dual Core model: Intel Core i3 530 bits: 64 type: MT MCP arch: Nehalem
family: 6 model-id: 25 (37) stepping: 2 microcode: 11 L2 cache: 4096 KiB
bogomips: 23409
Speed: 1817 MHz min/max: 1200/2933 MHz Core speeds (MHz): 1: 1744 2: 1402 3: 1488
4: 1438
Flags: acpi aperfmperf apic arat arch_perfmon bts clflush cmov constant_tsc cpuid cx16
cx8 de ds_cpl dtes64 dtherm dts ept est flexpriority flush_l1d fpu fxsr ht ibpb ibrs
lahf_lm lm mca mce mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pdcm pebs pge
pni popcnt pse pse36 pti rdtscp rep_good sep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp
syscall tm tm2 tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr
Vulnerabilities: Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP:
conditional, RSB filling
Graphics: Device-1: AMD Cedar [Radeon HD 5000/6000/7350/8350 Series] vendor: Dell XPS 8300
driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:68f9
Display: x11 server: X.Org 1.20.4 driver: ati,radeon unloaded: fbdev,modesetting,vesa
resolution: 2048×1152~60Hz
OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 5.2.15-antix.1-amd64-smp LLVM 7.0.1)
v: 3.3 Mesa 18.3.6 compat-v: 3.1 direct render: Yes
Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3b56
Device-2: AMD Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] vendor: Dell XPS 8300
driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 1002:aa68
Sound Server: ALSA v: k5.2.15-antix.1-amd64-smp
Network: Device-1: Accton SMC2-1211TX driver: 8139too v: 0.9.28 port: e800 bus ID: 04:01.0
chip ID: 1113:1211
IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> type: dynamic mngtmpaddr scope: global
IP v6: <filter> scope: link
WAN IP: <filter>In reply to: Unable to AutoPlay DVDs
RobK88
Thank you for your post. I followed your instructions and generated a new /etc/fstab.
The new fstab is very similar to my original fastab (see below).
I ended up reverting to the original /etc/fstab since I liked the options better.And during the generation of the new /etc/fstab, the following mountpoints were created in /media:
cdrom
cdrw
dvd
dvdrw
sr0
user (which is my username)P.S When I insert a removable USB flash drive formatted in FAT32, a new mountpoint is typically created and shows up in the /media/user directory.
During the fresh install of antiX-19, shouldn’t the antiX-19 installer have created all these mountpoints?
As noted above, I preferred the original fstab file over the newly generated one:
Original /etc/fstab
# Pluggable devices are handled by uDev, they are not in fstab UUID=2a6c1ed0-15d7-4f56-b5d6-92104c24477f / jfs defaults,noatime 1 1 UUID=4df08335-bd1b-4a3f-ac67-085f9f2fb131 /home jfs defaults,noatime 1 2 UUID=4e8fee7b-de51-418f-b3b5-0e5f52cead08 swap swap defaults 0 0 /dev/cdrom /media/cdrom iso9660 noauto,exec,users,ro 0 0 /dev/cdrw /media/cdrw iso9660 noauto,exec,users,rw 0 0 /dev/dvd /media/dvd udf noauto,exec,users,ro 0 0 /dev/dvdrw /media/dvdrw udf noauto,exec,users,rw 0 0 /dev/sr0 /media/sr0 auto noauto,exec,users,ro 0 0Newly Generated fstab
# /etc/fstab: static file system information # # Created by make-fstab on Mon Nov 4 17:29:36 EST 2019 # <file system> <mount point> <type> <options> <dump/pass> # Added by make-fstab /dev/sda1 label=Linux-Swap UUID=4e8fee7b-de51-418f-b3b5-0e5f52cead08 swap swap defaults 0 0 # Added by make-fstab /dev/sda2 label=rootantiX19 UUID=2a6c1ed0-15d7-4f56-b5d6-92104c24477f / jfs noauto,exec 0 0 # Added by make-fstab /dev/sda3 label=homeantiX UUID=4df08335-bd1b-4a3f-ac67-085f9f2fb131 /home jfs noauto,exec 0 0 # Added by make-fstab /dev/cdrom /dev/cdrom /media/cdrom iso9660 noauto,exec,users,ro 0 0 # Added by make-fstab /dev/cdrw /dev/cdrw /media/cdrw iso9660 noauto,exec,users,rw 0 0 # Added by make-fstab /dev/dvd /dev/dvd /media/dvd udf noauto,exec,users,ro 0 0 # Added by make-fstab /dev/dvdrw /dev/dvdrw /media/dvdrw udf noauto,exec,users,rw 0 0 # Added by make-fstab /dev/sr0 /dev/sr0 /media/sr0 auto noauto,exec,users,ro 0 0- This reply was modified 3 years, 6 months ago by RobK88.
Marco D.G.
Hi there, I have installed antiX-19_x64-core.iso on a Virtualbox VM then updated and installed the antix-snapshot-cli utility. The problem is that when i create a new Virtualbox VM with the new .iso generated by the antixsnapshot command, after selecting antix-snapshot from the GRUB, it gives me the following Error:
Error: /init: line 1: can’t create /proc/sys/kernel/hotblug: nonexistent directory
Error: mount: mounting /live/aufs on /live/aufs failed: No such deviceFatal Error
Could not mount afsHere is the screenshot: https://prnt.sc/prt26z
I’ve tried both Kernel 4.9.193-antix.1-amd64-smp and 5.2.8-antix.1-amd64-smp
In this video from runwiththedolphin the error descripted above does not occur: https://www.youtube.com/watch?v=nEW9r49ttbs
I don’t know if this matter, but in the installation process I have done:
gpt
sda1 1G Linux swap
sda2 16G Linux filesystem
sda3 3G Linux filesystem
write, quit
root partition: sda2
file system: ext4
use sepatate ‘/home’ partition? y
/home partition: sda3
is sda3 a new ‘/home’ partition? y
file system: ext4
running antix-net? n
install some apps via cli-aptiX? n
install grub on MBR? yI don’t know if this this even matter, but the disk is an XPG 8200pro NMVE
VirtualBox VM config:
2G memory
2 logic processors
20GB specified dimensionI really wanted to use antiX core to build the system by myself, still keeping the fantastic utilities that antiX offers, any help would be appreciated, Marco.
- This topic was modified 3 years, 6 months ago by Marco D.G..
- This topic was modified 3 years, 6 months ago by Marco D.G..
- This topic was modified 3 years, 6 months ago by Marco D.G..
rfinco
Hello,
I tried to install antiX 19 32bit and 64bit to an external USB HDD, and the install failed at the point of preparing the partitions. I tried both GUI and CLI installers with the same result. I installed antiX 19 64bit to the internal SATA HDD without any problem.
I installed the following distros to the same external USB HDD without any problems:
– Debian 10 64bit
– MX Linux 19 64bit
– Ubuntu 18.04.3 64bit
– Peppermint-10-20190514 64bitWhile doing the GUI install, the failure message that I got was:
“Failed to format required partitions”
After dismissing this message, the whole install window was disabled, and I had to dismiss it with the upper right corner “X” button.
Here is the complete CLI install session:
demo@antix1:~ $ sudo cli-installer make-fstab: Remove all dynamic entries from /etc/fstab make-fstab: Create new /etc/fstab make-fstab: Ignore iso9660 filesystem on device /dev/sda1 make-fstab: Put 4 hard drive entries into /etc/fstab make-fstab: Put 5 removable entries into /etc/fstab Requirements for minimum installation: antiX-full: hard-disk 4.0GB RAM 64MB antiX-base: hard-disk 3.0GB RAM 48MB antiX-core: hard-disk 1.0GB RAM 48MB antiX-net: hard-disk 0.7GB RAM 48MB Make sure you are connected to the net BEFORE running this installer ====Disk and partition Information==== Name Size FS Label sda2 - 3.1M - Fat32 - EFI-LIVE sdf1 - 70.5G - ext4 sdf2 - 4G - swap Do you want to repartition the disk (y/N)? n Root partition (hda1, sda2, etc): sdf1 Deleting the contents of the sdf1 partition. This may take some time. Please wait.... Use separate '/home' partition (y/N)? n Are you running antiX-net (y/N)? n /usr/local/bin/cli-installer: line 494: syntax error: unexpected end of file demo@antix1:~ $From inxi, sda is live boot flash drive, sdf is external HDD being installed to:
>>> System: Host: antix1 Kernel: 4.9.193-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 8.3.0 Desktop: IceWM 1.5.5+git20190610 Distro: antiX-19_x64-full Marielle Franco 16 October 2019 base: Debian GNU/Linux 10 (buster) Machine: Type: Desktop System: Compaq Presario 061 product: RK519AA-ABA SR2044NX NA680 v: 0nx1411RE101ASTE300 serial: CNH64027N2 Mobo: Hewleet-Packard model: Asterope3 v: 1.0 serial: N/A BIOS: American Megatrends v: 3.17 date: 07/26/2006 Memory: RAM: total: 2.88 GiB used: 252.5 MiB (8.6%) Array-1: capacity: 4 GiB note: est. slots: 2 EC: None max module size: 2 GiB note: est. Device-1: DIMM0 size: 2 GiB speed: Unknown type: DDR2 Device-2: DIMM1 size: 1 GiB speed: Unknown type: DDR2 Drives: Local Storage: total: 78.26 GiB used: 57.1 MiB (0.1%) ID-1: /dev/sda type: USB vendor: PNY model: USB 2.0 FD size: 3.73 GiB ID-2: /dev/sdf type: USB vendor: Samsung model: HM080HI size: 74.53 GiB Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GH24NSB0 rev: LN00 dev-links: cdrom,cdrw,dvd,dvdrwAnybody have this happen?
Thanks. rfinco..
In reply to: see partition content
Aleph_Sev
sudo make-fstab
Sorry, what nonsense… I didn’t realize.
MX 18.3 Is installed no 17.1sudo make-fstab [sudo] password for luis: make-fstab: Remove all dynamic entries from /etc/fstab make-fstab: Put 0 hard drive entries into /etc/fstab make-fstab: Put 0 removable entries into /etc/fstab# Pluggable devices are handled by uDev, they are not in fstab UUID=0cebb919-34da-4010-b662-fff3e0e0e570 / ext4 defaults 1 1 #-> /dev/sda5 UUID=4b561877-6276-48fa-be7c-092cc6906cf7 swap swap defaults 0 0 #-> /dev/sda1 label=System_Reserved UUID=66ED21040780256F /media/System_Reserved ntfs-3g noauto,noexec,uid=1000,gid=users,dmask=002,fmask=113,users 0 0 #-> /dev/sda2 UUID=A4FC92C92373B651 /media/A4FC92C92373B651 ntfs-3g noauto,noexec,uid=1000,gid=users,dmask=002,fmask=113,users 0 0 #-> /dev/sda6 label=rootMX17.1 UUID=125c03a1-5d63-4f3e-aa83-3d03d143a00a /media/rootMX17.1 ext4 noauto,exec,users 0 0 /dev/cdrom /media/cdrom iso9660 noauto,exec,users,ro 0 0 /dev/cdrw /media/cdrw iso9660 noauto,exec,users,rw 0 0 /dev/dvd /media/dvd udf noauto,exec,users,ro 0 0 /dev/dvdrw /media/dvdrw udf noauto,exec,users,rw 0 0 /dev/sr0 /media/sr0 auto noauto,exec,users,ro 0 0dimz
please re look (i install last antix 19 )
dim@antix1:~
$ inxi -zv7
System:
Host: antix1 Kernel: 4.9.193-antix.1-amd64-smp x86_64 bits: 64
compiler: gcc v: 8.3.0 Desktop: IceWM 1.5.5+git20190610 dm: SLiM 1.3.6
Distro: antiX-19_x64-full Marielle Franco 16 October 2019
base: Debian GNU/Linux 10 (buster)
Machine:
Type: Laptop System: Hewlett-Packard product: HP Compaq 6730b (GW687AV)
v: F.08 serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: Hewlett-Packard model: 30DD v: KBC Version 96.18 serial: <filter>
BIOS: Hewlett-Packard v: 68PDD Ver. F.08 date: 09/18/2008
Battery:
ID-1: BAT0 charge: 45.5 Wh condition: 46.5/46.5 Wh (100%) volts: 12.4/11.1
model: Hewlett-Packard Primary type: Li-ion serial: <filter>
status: Unknown
Memory:
RAM: total: 1.89 GiB used: 849.9 MiB (44.0%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Dual Core model: Intel Core2 Duo P8400 bits: 64 type: MCP
arch: Penryn rev: 6 L2 cache: 3072 KiB bogomips: 9044
Speed: 1600 MHz min/max: 800/2267 MHz Core speeds (MHz): 1: 1600 2: 800
Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc
cx16 cx8 de ds_cpl dtes64 dtherm dts est flexpriority fpu fxsr ht kaiser
lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge
pni pse pse36 sep smx ss sse sse2 sse4_1 ssse3 syscall tm tm2 tpr_shadow
tsc vme vmx vnmi xtpr
Graphics:
Device-1: Intel Mobile 4 Series Integrated Graphics
vendor: Hewlett-Packard driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:2a42
Display: x11 server: X.Org 1.20.4 driver: intel resolution: 1280×800~60Hz
OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express v: 2.1 Mesa 18.3.6
direct render: Yes
Audio:
Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:293e
Sound Server: ALSA v: k4.9.193-antix.1-amd64-smp
Network:
Device-1: Broadcom Limited BCM4312 802.11b/g LP-PHY
vendor: Hewlett-Packard driver: wl v: kernel port: 6000 bus ID: 02:00.0
chip ID: 14e4:4315
IF: wlan0 state: up mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> scope: link
Device-2: Broadcom Limited NetLink BCM5787M Gigabit Ethernet PCI Express
vendor: Hewlett-Packard driver: tg3 v: 3.137 port: 6000 bus ID: 85:00.0
chip ID: 14e4:1693
IF: eth0 state: down mac: <filter>
WAN IP: <filter>
Drives:
Local Storage: total: 111.79 GiB used: 4.31 GiB (3.9%)
ID-1: /dev/sda vendor: Toshiba model: MK1252GSX size: 111.79 GiB
speed: 3.0 Gb/s serial: <filter> rev: 1C scheme: MBR
Optical-1: /dev/sr0 vendor: Optiarc model: DVD-ROM DDU820S rev: MH04
dev-links: cdrom,dvd
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: none
state: running
RAID:
Message: No RAID data was found.
Partition:
ID-1: / size: 17.40 GiB used: 3.65 GiB (21.0%) fs: ext4 dev: /dev/sda3
label: rootantiX19 uuid: 7f55fe2c-2e25-4d1f-942d-73427c25bb78
ID-2: /home size: 20.84 GiB used: 669.8 MiB (3.1%) fs: ext4 dev: /dev/sda4
label: homeantiX uuid: b831d762-4b86-4cd6-9165-48229f87b600
ID-3: swap-1 size: 6.52 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5
label: N/A uuid: 40ccc468-e3a5-4544-82b8-ee84ab6df0b5
Unmounted:
ID-1: /dev/sda1 size: 1 KiB fs: <root required> label: N/A uuid: N/A
ID-2: /dev/sda2 size: 46.57 GiB fs: ext4 label: N/A
uuid: 743f0e89-2ac8-42cb-a66d-bbef565e1ecc
ID-3: /dev/sda6 size: 18.62 GiB fs: ext4 label: N/A
uuid: d478de32-5949-4f6f-b9d3-aabeaaf9bcc9
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Device-1: 2-5:4 info: N/A type: <vendor specific> driver: N/A
interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 2717:ff40 serial: <filter>
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Sensors:
System Temperatures: cpu: 45.0 C mobo: 40.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 157 Uptime: 34m Init: SysVinit v: 2.93 runlevel: 5 default: 5
Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 running in: roxterm
inxi: 3.0.36
dim@antix1:~
$same problem …
dim@antix1:~
$ blkid
/dev/sda2: UUID=”743f0e89-2ac8-42cb-a66d-bbef565e1ecc” TYPE=”ext4″ PARTUUID=”47f6f69d-02″
/dev/sda3: LABEL=”rootantiX19″ UUID=”7f55fe2c-2e25-4d1f-942d-73427c25bb78″ TYPE=”ext4″ PARTUUID=”47f6f69d-03″
/dev/sda4: LABEL=”homeantiX” UUID=”b831d762-4b86-4cd6-9165-48229f87b600″ TYPE=”ext4″ PARTUUID=”47f6f69d-04″
/dev/sda5: UUID=”40ccc468-e3a5-4544-82b8-ee84ab6df0b5″ TYPE=”swap” PARTUUID=”47f6f69d-05″
/dev/sda6: UUID=”d478de32-5949-4f6f-b9d3-aabeaaf9bcc9″ TYPE=”ext4″ PARTUUID=”47f6f69d-06″
dim@antix1:~my phone is xiaomi redmi3 …
i dont know if use mtp but with others ubuntu based distro i can see and copy files and i can charge iti use many times my laptops usb for charge my cellphone or see my files and photos in my cellphone..
with antix i can see them or charge my phone..
why this happen?
i have second partition with Ubuntu based distro and works fine …
what must i do ?dim@antix1dim:~
$ inxi -zv7
System:
Host: antix1dim Kernel: 4.9.160-antix.2-486-smp i686 bits: 32 compiler: gcc v: 6.3.0
Desktop: IceWM 1.4.2 info: icewmtray dm: SLiM 1.3.4
Distro: antiX-17.4.1_386-full Helen Keller 28 March 2019
base: Debian GNU/Linux 9 (stretch)
Machine:
Type: Laptop System: Hewlett-Packard product: HP Compaq 6730b (GW687AV) v: F.08
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: Hewlett-Packard model: 30DD v: KBC Version 96.18 serial: <filter>
BIOS: Hewlett-Packard v: 68PDD Ver. F.08 date: 09/18/2008
Battery:
ID-1: BAT0 charge: 45.7 Wh condition: 46.5/46.5 Wh (100%) volts: 12.5/11.1
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Unknown
Memory:
RAM: total: 1.90 GiB used: 677.8 MiB (34.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Dual Core model: Intel Core2 Duo P8400 bits: 64 type: MCP arch: Penryn
rev: 6 L2 cache: 3072 KiB bogomips: 9044
Speed: 1600 MHz min/max: 800/2267 MHz Core speeds (MHz): 1: 1600 2: 1600
Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de
ds_cpl dtes64 dtherm dts est flexpriority fpu fxsr ht lahf_lm lm mca mce mmx monitor
msr mtrr nx pae pat pbe pdcm pebs pge pni pse pse36 sep smx ss sse sse2 sse4_1 ssse3
tm tm2 tpr_shadow tsc vme vmx vnmi xtpr
Graphics:
Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Hewlett-Packard
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:2a42
Display: server: X.Org 1.19.2 driver: modesetting unloaded: fbdev,vesa
resolution: 1280×800~60Hz
OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2 v: 2.1 Mesa 13.0.6
direct render: Yes
Audio:
Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 00:1b.0 chip ID: 8086:293e
Sound Server: ALSA v: k4.9.160-antix.2-486-smp
Network:
Device-1: Broadcom Limited BCM4312 802.11b/g LP-PHY vendor: Hewlett-Packard
driver: wl v: kernel port: 6000 bus ID: 02:00.0 chip ID: 14e4:4315
IF: wlan0 state: up mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> scope: link
Device-2: Broadcom Limited NetLink BCM5787M Gigabit Ethernet PCI Express
vendor: Hewlett-Packard driver: tg3 v: 3.137 port: 6000 bus ID: 85:00.0
chip ID: 14e4:1693
IF: eth0 state: down mac: <filter>
WAN IP: <filter>
Drives:
Local Storage: total: 126.33 GiB used: 6.23 GiB (4.9%)
ID-1: /dev/sda vendor: Toshiba model: MK1252GSX size: 111.79 GiB speed: 3.0 Gb/s
serial: <filter> rev: 1C scheme: MBR
ID-2: /dev/sdb type: USB vendor: Toshiba model: TransMemory size: 14.53 GiB
serial: <filter> rev: PMAP scheme: MBR
Optical-1: /dev/sr0 vendor: Optiarc model: DVD-ROM DDU820S rev: MH04
dev-links: cdrom,dvd
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: none state: running
RAID:
Message: No RAID data was found.
Partition:
ID-1: / size: 17.40 GiB used: 3.64 GiB (20.9%) fs: ext4 dev: /dev/sda3
label: rootantiX17.4.1 uuid: 3820c3bb-0b7f-447b-9b6f-547a4c7e1a7d
ID-2: /home size: 20.84 GiB used: 2.54 GiB (12.2%) fs: ext4 dev: /dev/sda4
label: homeantiX uuid: f01c1ec2-fb66-49b9-b5c5-e5fddc12f018
ID-3: /media/-rw size: 11.66 GiB used: 40.0 MiB (0.3%) fs: ext4 dev: /dev/sdb5
label: -rw uuid: 3cd1ace9-6a9d-43a0-933e-a1a45fd7793d
ID-4: /media/MX-Live raw size: 1.41 GiB size: <root required> used: <root required>
fs: iso9660 dev: /dev/sdb4 label: MX-Live uuid: 2019-10-21-17-35-05-00
ID-5: /media/usbboot size: 240.2 MiB used: 7.0 MiB (2.9%) fs: vfat dev: /dev/sdb3
label: usbboot uuid: 3055-742E
ID-6: /media/usbdata size: 1.03 GiB used: 5.8 MiB (0.6%) fs: ntfs dev: /dev/sdb1
label: usbdata uuid: 0504B837002B90F5
ID-7: swap-1 size: 6.52 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5 label: N/A
uuid: 40ccc468-e3a5-4544-82b8-ee84ab6df0b5
Unmounted:
ID-1: /dev/sda1 size: 1 KiB fs: <root required> label: N/A uuid: N/A
ID-2: /dev/sda2 size: 46.57 GiB fs: ext4 label: N/A
uuid: 743f0e89-2ac8-42cb-a66d-bbef565e1ecc
ID-3: /dev/sda6 size: 18.62 GiB fs: ext4 label: N/A
uuid: d478de32-5949-4f6f-b9d3-aabeaaf9bcc9
ID-4: /dev/sdb2 size: 1 KiB fs: <root required> label: N/A uuid: N/A
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Device-1: 2-5:2 info: Toshiba Kingston DataTraveler 102/2.0 / HEMA Flash Drive 2 GB
/ PNY Attache 4GB Stick
type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s
chip ID: 0930:6545 serial: <filter>
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Device-2: 3-1:2 info: HP Bluetooth 2.0 Interface [Broadcom BCM2045] type: Bluetooth
driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip ID: 03f0:171d
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Sensors:
System Temperatures: cpu: 50.0 C mobo: 43.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 161 Uptime: 1h 08m Init: SysVinit v: 2.88 runlevel: 5 default: 5
Compilers: gcc: 6.3.0 alt: 6 Shell: bash v: 4.4.12 running in: lxterminal
inxi: 3.0.36
dim@antix1dim:~
$Topic: antix 32 or 64 bit?
I try both in my system …
with antix 32 start from 85 M RAM
with antix 64 start from 500 M RAM
my system is 64
i prefer use antix 32 because is faster but is this better solution or must use antix 64 ?
give me your opiniondim@antix1dim:~
$ inxi -zv7
System:
Host: antix1dim Kernel: 4.9.160-antix.2-486-smp i686 bits: 32 compiler: gcc v: 6.3.0
Desktop: IceWM 1.4.2 info: icewmtray dm: SLiM 1.3.4
Distro: antiX-17.4.1_386-full Helen Keller 28 March 2019
base: Debian GNU/Linux 9 (stretch)
Machine:
Type: Laptop System: Hewlett-Packard product: HP Compaq 6730b (GW687AV) v: F.08
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: Hewlett-Packard model: 30DD v: KBC Version 96.18 serial: <filter>
BIOS: Hewlett-Packard v: 68PDD Ver. F.08 date: 09/18/2008
Battery:
ID-1: BAT0 charge: 45.7 Wh condition: 46.5/46.5 Wh (100%) volts: 12.5/11.1
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Unknown
Memory:
RAM: total: 1.90 GiB used: 677.8 MiB (34.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Dual Core model: Intel Core2 Duo P8400 bits: 64 type: MCP arch: Penryn
rev: 6 L2 cache: 3072 KiB bogomips: 9044
Speed: 1600 MHz min/max: 800/2267 MHz Core speeds (MHz): 1: 1600 2: 1600
Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de
ds_cpl dtes64 dtherm dts est flexpriority fpu fxsr ht lahf_lm lm mca mce mmx monitor
msr mtrr nx pae pat pbe pdcm pebs pge pni pse pse36 sep smx ss sse sse2 sse4_1 ssse3
tm tm2 tpr_shadow tsc vme vmx vnmi xtpr
Graphics:
Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Hewlett-Packard
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:2a42
Display: server: X.Org 1.19.2 driver: modesetting unloaded: fbdev,vesa
resolution: 1280×800~60Hz
OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2 v: 2.1 Mesa 13.0.6
direct render: Yes
Audio:
Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 00:1b.0 chip ID: 8086:293e
Sound Server: ALSA v: k4.9.160-antix.2-486-smp
Network:
Device-1: Broadcom Limited BCM4312 802.11b/g LP-PHY vendor: Hewlett-Packard
driver: wl v: kernel port: 6000 bus ID: 02:00.0 chip ID: 14e4:4315
IF: wlan0 state: up mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> scope: link
Device-2: Broadcom Limited NetLink BCM5787M Gigabit Ethernet PCI Express
vendor: Hewlett-Packard driver: tg3 v: 3.137 port: 6000 bus ID: 85:00.0
chip ID: 14e4:1693
IF: eth0 state: down mac: <filter>
WAN IP: <filter>
Drives:
Local Storage: total: 126.33 GiB used: 6.23 GiB (4.9%)
ID-1: /dev/sda vendor: Toshiba model: MK1252GSX size: 111.79 GiB speed: 3.0 Gb/s
serial: <filter> rev: 1C scheme: MBR
ID-2: /dev/sdb type: USB vendor: Toshiba model: TransMemory size: 14.53 GiB
serial: <filter> rev: PMAP scheme: MBR
Optical-1: /dev/sr0 vendor: Optiarc model: DVD-ROM DDU820S rev: MH04
dev-links: cdrom,dvd
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: none state: running
RAID:
Message: No RAID data was found.
Partition:
ID-1: / size: 17.40 GiB used: 3.64 GiB (20.9%) fs: ext4 dev: /dev/sda3
label: rootantiX17.4.1 uuid: 3820c3bb-0b7f-447b-9b6f-547a4c7e1a7d
ID-2: /home size: 20.84 GiB used: 2.54 GiB (12.2%) fs: ext4 dev: /dev/sda4
label: homeantiX uuid: f01c1ec2-fb66-49b9-b5c5-e5fddc12f018
ID-3: /media/-rw size: 11.66 GiB used: 40.0 MiB (0.3%) fs: ext4 dev: /dev/sdb5
label: -rw uuid: 3cd1ace9-6a9d-43a0-933e-a1a45fd7793d
ID-4: /media/MX-Live raw size: 1.41 GiB size: <root required> used: <root required>
fs: iso9660 dev: /dev/sdb4 label: MX-Live uuid: 2019-10-21-17-35-05-00
ID-5: /media/usbboot size: 240.2 MiB used: 7.0 MiB (2.9%) fs: vfat dev: /dev/sdb3
label: usbboot uuid: 3055-742E
ID-6: /media/usbdata size: 1.03 GiB used: 5.8 MiB (0.6%) fs: ntfs dev: /dev/sdb1
label: usbdata uuid: 0504B837002B90F5
ID-7: swap-1 size: 6.52 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5 label: N/A
uuid: 40ccc468-e3a5-4544-82b8-ee84ab6df0b5
Unmounted:
ID-1: /dev/sda1 size: 1 KiB fs: <root required> label: N/A uuid: N/A
ID-2: /dev/sda2 size: 46.57 GiB fs: ext4 label: N/A
uuid: 743f0e89-2ac8-42cb-a66d-bbef565e1ecc
ID-3: /dev/sda6 size: 18.62 GiB fs: ext4 label: N/A
uuid: d478de32-5949-4f6f-b9d3-aabeaaf9bcc9
ID-4: /dev/sdb2 size: 1 KiB fs: <root required> label: N/A uuid: N/A
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Device-1: 2-5:2 info: Toshiba Kingston DataTraveler 102/2.0 / HEMA Flash Drive 2 GB
/ PNY Attache 4GB Stick
type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s
chip ID: 0930:6545 serial: <filter>
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Device-2: 3-1:2 info: HP Bluetooth 2.0 Interface [Broadcom BCM2045] type: Bluetooth
driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip ID: 03f0:171d
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Sensors:
System Temperatures: cpu: 50.0 C mobo: 43.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 161 Uptime: 1h 08m Init: SysVinit v: 2.88 runlevel: 5 default: 5
Compilers: gcc: 6.3.0 alt: 6 Shell: bash v: 4.4.12 running in: lxterminal
inxi: 3.0.36
dim@antix1dim:~
$please see previous discussion το ΜΧ-linuxforum…
$ inxi -zv7
System:
Host: antix1dim Kernel: 4.9.160-antix.2-486-smp i686 bits: 32 compiler: gcc v: 6.3.0
Desktop: IceWM 1.4.2 info: icewmtray dm: SLiM 1.3.4
Distro: antiX-17.4.1_386-full Helen Keller 28 March 2019
base: Debian GNU/Linux 9 (stretch)
Machine:
Type: Laptop System: Hewlett-Packard product: HP Compaq 6730b (GW687AV) v: F.08
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: Hewlett-Packard model: 30DD v: KBC Version 96.18 serial: <filter>
BIOS: Hewlett-Packard v: 68PDD Ver. F.08 date: 09/18/2008
Battery:
ID-1: BAT0 charge: 45.7 Wh condition: 46.5/46.5 Wh (100%) volts: 12.5/11.1
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Unknown
Memory:
RAM: total: 1.90 GiB used: 677.8 MiB (34.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Dual Core model: Intel Core2 Duo P8400 bits: 64 type: MCP arch: Penryn
rev: 6 L2 cache: 3072 KiB bogomips: 9044
Speed: 1600 MHz min/max: 800/2267 MHz Core speeds (MHz): 1: 1600 2: 1600
Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de
ds_cpl dtes64 dtherm dts est flexpriority fpu fxsr ht lahf_lm lm mca mce mmx monitor
msr mtrr nx pae pat pbe pdcm pebs pge pni pse pse36 sep smx ss sse sse2 sse4_1 ssse3
tm tm2 tpr_shadow tsc vme vmx vnmi xtpr
Graphics:
Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Hewlett-Packard
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:2a42
Display: server: X.Org 1.19.2 driver: modesetting unloaded: fbdev,vesa
resolution: 1280×800~60Hz
OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2 v: 2.1 Mesa 13.0.6
direct render: Yes
Audio:
Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 00:1b.0 chip ID: 8086:293e
Sound Server: ALSA v: k4.9.160-antix.2-486-smp
Network:
Device-1: Broadcom Limited BCM4312 802.11b/g LP-PHY vendor: Hewlett-Packard
driver: wl v: kernel port: 6000 bus ID: 02:00.0 chip ID: 14e4:4315
IF: wlan0 state: up mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> scope: link
Device-2: Broadcom Limited NetLink BCM5787M Gigabit Ethernet PCI Express
vendor: Hewlett-Packard driver: tg3 v: 3.137 port: 6000 bus ID: 85:00.0
chip ID: 14e4:1693
IF: eth0 state: down mac: <filter>
WAN IP: <filter>
Drives:
Local Storage: total: 126.33 GiB used: 6.23 GiB (4.9%)
ID-1: /dev/sda vendor: Toshiba model: MK1252GSX size: 111.79 GiB speed: 3.0 Gb/s
serial: <filter> rev: 1C scheme: MBR
ID-2: /dev/sdb type: USB vendor: Toshiba model: TransMemory size: 14.53 GiB
serial: <filter> rev: PMAP scheme: MBR
Optical-1: /dev/sr0 vendor: Optiarc model: DVD-ROM DDU820S rev: MH04
dev-links: cdrom,dvd
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: none state: running
RAID:
Message: No RAID data was found.
Partition:
ID-1: / size: 17.40 GiB used: 3.64 GiB (20.9%) fs: ext4 dev: /dev/sda3
label: rootantiX17.4.1 uuid: 3820c3bb-0b7f-447b-9b6f-547a4c7e1a7d
ID-2: /home size: 20.84 GiB used: 2.54 GiB (12.2%) fs: ext4 dev: /dev/sda4
label: homeantiX uuid: f01c1ec2-fb66-49b9-b5c5-e5fddc12f018
ID-3: /media/-rw size: 11.66 GiB used: 40.0 MiB (0.3%) fs: ext4 dev: /dev/sdb5
label: -rw uuid: 3cd1ace9-6a9d-43a0-933e-a1a45fd7793d
ID-4: /media/MX-Live raw size: 1.41 GiB size: <root required> used: <root required>
fs: iso9660 dev: /dev/sdb4 label: MX-Live uuid: 2019-10-21-17-35-05-00
ID-5: /media/usbboot size: 240.2 MiB used: 7.0 MiB (2.9%) fs: vfat dev: /dev/sdb3
label: usbboot uuid: 3055-742E
ID-6: /media/usbdata size: 1.03 GiB used: 5.8 MiB (0.6%) fs: ntfs dev: /dev/sdb1
label: usbdata uuid: 0504B837002B90F5
ID-7: swap-1 size: 6.52 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5 label: N/A
uuid: 40ccc468-e3a5-4544-82b8-ee84ab6df0b5
Unmounted:
ID-1: /dev/sda1 size: 1 KiB fs: <root required> label: N/A uuid: N/A
ID-2: /dev/sda2 size: 46.57 GiB fs: ext4 label: N/A
uuid: 743f0e89-2ac8-42cb-a66d-bbef565e1ecc
ID-3: /dev/sda6 size: 18.62 GiB fs: ext4 label: N/A
uuid: d478de32-5949-4f6f-b9d3-aabeaaf9bcc9
ID-4: /dev/sdb2 size: 1 KiB fs: <root required> label: N/A uuid: N/A
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Device-1: 2-5:2 info: Toshiba Kingston DataTraveler 102/2.0 / HEMA Flash Drive 2 GB
/ PNY Attache 4GB Stick
type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s
chip ID: 0930:6545 serial: <filter>
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Device-2: 3-1:2 info: HP Bluetooth 2.0 Interface [Broadcom BCM2045] type: Bluetooth
driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip ID: 03f0:171d
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Sensors:
System Temperatures: cpu: 50.0 C mobo: 43.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 161 Uptime: 1h 08m Init: SysVinit v: 2.88 runlevel: 5 default: 5
Compilers: gcc: 6.3.0 alt: 6 Shell: bash v: 4.4.12 running in: lxterminal
inxi: 3.0.36In reply to: Hercules eCafé EC-800 screen resolution
anewangelfades
$ xrandr -s 1024×600
Size 1024×600 not found in available modesIf a particular screen resolution is not found in available modes by xrandr,
there is a possibility to add a new modeline. It’s described in comment #51 in the bug-report you linked to or on this side
http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=https%3A%2F%2Faxebase.net%2Fblog%2F2011%2F07%2F27%2Fhinzufuegen-einer-aufloesung-ueber-cvt-und-xrandr%2For on this side under resolution http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=https%3A%2F%2Fwiki.ubuntuusers.de%2FRandR%2F%23Statische-Konfiguration-ohne-xorg-conf
You have to know the technical data for the screen.
I don’t have any experience with it, so I can’t promise that it will work and really help you, but maybe it’s worth a try.You probably have already realized that an older antiX version might have less problems.
Great idea, thanks!
I installed the Geode drivers, and used an old xorg.conf I saved from an working xubuntu installation, reported below:Section "Module" Load "ztv" EndSection Section "Device" Identifier "card0" Driver "geode" BusID "PCI:0:1:1" Option "PanelMode" "33450 800 840 968 1056 480 490 492 525" EndSection Section "Monitor" Identifier "monitor0" Modeline "1024x768" 64.56 1024 1056 1296 1328 768 783 791 807 -hsync +vsync Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 -hsync +vsync Modeline "800x480" 33.45 800 840 968 1056 480 490 492 525 -hsync +vsync Option "dpms" EndSection Section "Screen" Identifier "Default Screen" Monitor "monitor0" Device "card0" DefaultDepth 24 Subsection "Display" Depth 24 Modes "1024x600" "1024x768" "800x480" EndSubsection EndSectionNext time I booted up, I got a console. Logged in, typed
startx, but I got an error.
The file /var/log/Xorg.0.log said the following:[ 55.164] Module class: X.Org Video Driver [ 55.164] ABI class: X.Org Video Driver, version 24.0 [ 55.164] (II) z4l driver for Video4Linux [ 55.164] (II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX [ 55.185] (WW) Falling back to old probe method for z4l [ 55.187] AmdPciProbe: Probing for supported devices! [ 55.188] (II) Loading sub module "vgahw" [ 55.188] (II) LoadModule: "vgahw" [ 55.194] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 55.221] (II) Module vgahw: vendor="X.Org Foundation" [ 55.221] compiled for 1.20.4, module version = 0.1.0 [ 55.221] ABI class: X.Org Video Driver, version 24.0 [ 55.222] (EE) Fatal server error: [ 55.222] (EE) Unable to open /dev/cpu/0/msr: No such file or directory [ 55.222] (EE) [ 55.223] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 55.223] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional $ [ 55.223] (EE) [ 55.339] (EE) Server terminated with error (1). Closing log fileSo I typed
sudo modprobe msrand thenstartxagain, and it worked!Now
inxi -Fxz -rgives the following output:System: Host: EC-800 Kernel: 5.2.15-antix.1-486-smp i586 bits: 32 compiler: gcc v: 8.3.0 Desktop: IceWM 1.5.5+git20190610 Distro: antiX-19_386-full Marielle Franco 16 October 2019 base: Debian GNU/Linux 10 (buster) Machine: Type: Desktop System: Hercules product: EC-800 v: 1.0 serial: <filter> Mobo: TECO and Machinery model: TR2350 v: Rev 1.33 serial: <filter> BIOS: Insyde v: 4.00.01 Rev. 1.00.003 date: Built: 08/18/2005 Battery: ID-1: BATT charge: 20.0 Wh condition: 20.9/29.8 Wh (70%) model: YOKU ENERGY BT-6005 status: Unknown CPU: Topology: Single Core model: Geode Integrated by AMD PCS bits: 32 type: UP arch: Geode rev: 2 L2 cache: 128 KiB flags: N/A bogomips: 996 Speed: 498 MHz min/max: N/A Core speed (MHz): 1: 498 Graphics: Message: No Device data found. Display: server: X.Org 1.20.4 driver: geode resolution: 1024x600~60Hz OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.3.6 direct render: Yes Audio: Device-1: AMD CS5536 [Geode companion] Audio driver: snd_cs5535audio v: kernel bus ID: 00:0f.3 Sound Server: ALSA v: k5.2.15-antix.1-486-smp Network: Device-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter driver: 8139too v: 0.9.28 port: df00 bus ID: 00:0d.0 IF: eth0 state: down mac: <filter> IF-ID-1: wlan0 state: up mac: <filter> Drives: Local Storage: total: 18.66 GiB used: 4.41 GiB (23.6%) ID-1: /dev/sda vendor: Samsung model: HS020GB size: 18.66 GiB Partition: ID-1: / size: 16.24 GiB used: 4.41 GiB (27.1%) fs: ext4 dev: /dev/sda1 ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://it.mxrepo.com/antix/buster buster main nonfree Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.it.debian.org/debian/ buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.it.debian.org/debian/ buster main contrib non-free 2: deb http://security.debian.org/ buster/updates main contrib non-free No active apt repos in: /etc/apt/sources.list.d/onion.list Active apt repos in: /etc/apt/sources.list.d/palemoon.list 1: deb http://download.opensuse.org/repositories/home:/stevenpusser/xUbuntu_16.04/ / No active apt repos in: /etc/apt/sources.list.d/various.list Info: Processes: 91 Uptime: 19m Memory: 973.8 MiB used: 186.5 MiB (19.1%) Init: SysVinit runlevel: 5 Compilers: gcc: 8.3.0 Shell: bash v: 5.0.3 inxi: 3.0.36There are two problems anyway:
1) I always have to do
sudo modprobe msrand thenstartxat startup: is there any way to fix it?
2) If I change desktop, e.g. fluxbox, or jwm, everything freezes. Why?!? Also if I use Ctrl+Alt+F2 (or F3, or F8, or any other F*). I cannot understand the reason for this.Any ideas?
Thank you again!
Forum for users of antiX Linux. Mean and Lean and Proudly anti-fascist.
