-
Search Results
-
Anonymous
So this is log of INXI -V8 from terminal:
System: Host: antix16 Kernel: 4.4.10-antix.1-486-smp i686 bits: 32 compiler: gcc v: 4.9.3 Desktop: IceWM 1.3.8 dm: slim Distro: antiX-16.2_386-full Berta Cáceres 15 June 2017 Machine: Type: Desktop System: FUJITSU SIEMENS product: SCENIC E v: N/A serial: YBFC287921 Chassis: type: 6 v: SCEE serial: YBFC287921 Mobo: FUJITSU SIEMENS model: D1534 v: S26361-D1534 serial: N/A BIOS: FUJITSU SIEMENS // Phoenix v: 5.00 R2.05.1534.01 date: 04/07/2004 Memory: Array-1: capacity: 2 GiB slots: 2 EC: None max module size: 1 GiB note: est. Device-1: Slot-1 size: 256 MiB speed: 266 MHz type: DDR detail: synchronous bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: Not Specified Device-2: Slot-1 size: 256 MiB speed: 266 MHz type: DDR detail: synchronous bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: Not Specified PCI Slots: Slot: 1 type: 32-bit AGP 4x AGP status: Available length: Long Slot: 2 type: 32-bit PCI PCI-1 status: Available length: Long Slot: 3 type: 32-bit PCI PCI-2 status: Available length: Long CPU: Topology: Single Core model: Intel Celeron bits: 32 type: MCP arch: Netburst Willamette rev: 9 L2 cache: 128 KiB bogomips: 5186 Speed: 2593 MHz min/max: N/A Core speed (MHz): 1: 2593 Flags: acpi apic bts cid clflush cmov cx8 de dts fpu fxsr ht mca mce mmx msr mtrr pae pat pbe pebs pge pse pse36 sep ss sse sse2 tm tsc vme xtpr Graphics: Card-1: Intel 82865G Integrated Graphics driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:2572 Display: server: X.Org 1.16.4 driver: intel unloaded: fbdev,modesetting,vesa resolution: 1280x1024~60Hz OpenGL: renderer: Mesa DRI Intel 865G x86/MMX/SSE2 v: 1.3 Mesa 10.3.2 direct render: Yes Audio: Card-1: Intel 82801EB/ER AC97 Audio driver: snd_intel8x0 v: kernel bus ID: 00:1f.5 chip ID: 8086:24d5 Sound Server: ALSA v: k4.4.10-antix.1-486-smp Network: Card-1: Intel 82547EI Gigabit Ethernet driver: e1000 v: 7.3.21-k8-NAPI port: 4000 bus ID: 02:01.0 chip ID: 8086:1019 IF: eth0 state: down mac: 00:30:05:60:d9:9d Card-2: D-Link System AirPlus G DWL-G122 Wireless Adapter(rev.C1) [Ralink RT2571W] type: USB driver: rt73usb bus ID: 1:2 chip ID: 07d1:3c03 IF: wlan0 state: up mac: 00:22:b0:6c:a7:1e IP v4: 192.168.1.60/24 scope: global broadcast: 192.168.1.255 IP v6: fe80::222:b0ff:fe6c:a71e/64 scope: link WAN IP: 151.51.83.138 Drives: HDD Total Size: 37.25 GiB used: 3.02 GiB (8.1%) ID-1: /dev/sda vendor: Western Digital model: WD400BB-75DEA0 size: 37.25 GiB speed: <unknown> serial: WD-WMAD17271681 rev: 3E05 scheme: MBR Floppy-1: /dev/fd0 Optical-1: /dev/sr0 vendor: Optiarc model: DVD RW AD-7170A rev: 1.02 dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 48 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running RAID: Message: No RAID data was found. Partition: ID-1: / size: 4.03 GiB used: 3.02 GiB (74.8%) fs: ext4 dev: /dev/sda3 label: rootantiX-16 uuid: f7f8b361-d8f3-4de6-8260-d4b77dbde628 ID-2: swap-1 size: 500.0 MiB used: 312 KiB (0.1%) fs: swap dev: /dev/sda4 label: swap uuid: 2695d8a9-3d0f-4665-88fa-8b3b31877a03 Unmounted: ID-1: /dev/sda1 size: 29.63 GiB fs: ntfs label: N/A uuid: EE38034638030CF1 ID-2: /dev/sda2 size: 2.91 GiB fs: ntfs label: N/A uuid: 8E34A51234A4FE79 USB: Hub: 1:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002 Device-1: D-Link System AirPlus G DWL-G122 Wireless Adapter(rev.C1) [Ralink RT2571W] bus ID: 1:2 usb: 2.0 type: Vendor Specific Protocol chip ID: 07d1:3c03 Hub: 2:1 usb: 1.1 type: Full speed (or root) hub chip ID: 1d6b:0001 Hub: 3:1 usb: 1.1 type: Full speed (or root) hub chip ID: 1d6b:0001 Hub: 4:1 usb: 1.1 type: Full speed (or root) hub chip ID: 1d6b:0001 Hub: 5:1 usb: 1.1 type: Full speed (or root) hub chip ID: 1d6b:0001 Device-2: Logitech bus ID: 5:2 usb: 2.0 type: Keyboard chip ID: 046d:c52e Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://ftp.cc.uoc.gr/mirrors/linux/mx/antix/jessie jessie main nosystemd Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.it.debian.org/debian/ jessie-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.it.debian.org/debian/ jessie main contrib non-free 2: deb http://security.debian.org/ jessie/updates main contrib non-free No active apt repos in: /etc/apt/sources.list.d/mx.list No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 1: cpu: 32.1% command: firefox-esr pid: 2823 mem: 195.5 MiB (40.0%) 2: cpu: 28.7% command: inxi started by: perl pid: 4117 mem: 13.0 MiB (2.6%) 3: cpu: 26.5% command: firefox-esr pid: 3372 mem: 127.5 MiB (26.1%) 4: cpu: 17.5% command: firefox-esr pid: 2895 mem: 117.6 MiB (24.0%) 5: cpu: 14.6% command: x pid: 2096 mem: 10.7 MiB (2.1%) Memory top: 5 1: mem: 195.5 MiB (40.0%) command: firefox-esr pid: 2823 cpu: 32.1% 2: mem: 127.5 MiB (26.1%) command: firefox-esr pid: 3372 cpu: 26.5% 3: mem: 117.6 MiB (24.0%) command: firefox-esr pid: 2895 cpu: 17.5% 4: mem: 59.3 MiB (12.1%) command: firefox-esr pid: 3717 cpu: 0.5% 5: mem: 17.6 MiB (3.5%) command: roxterm pid: 2669 cpu: 0.3% Info: Processes: 140 Uptime: 9m Memory: 488.4 MiB used: 316.0 MiB (64.7%) Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 4.9.2 alt: 4.9 Shell: bash (sudo) v: 4.3.30 running in: sudo inxi: 3.0.10- This reply was modified 4 years, 5 months ago by rokytnji.
In reply to: To EDID or not to EDID, a Nouveau question.
LostRider
$ inxi -Fxzr System: Host: antix735 Kernel: 4.9.126-antix.1-486-smp i686 bits: 32 compiler: gcc v: 6.3.0 Desktop: JWM 2.3.6 Distro: antiX-17.2_386-base Helen Keller 4 October 2018 base: Debian GNU/Linux 9 (stretch) Machine: Type: Unknown System: Packard Bell NEC product: PLT 7800 v: N/A serial: <filter> Mobo: N/A model: N/A serial: <filter> BIOS: Intel v: 4S4EB0X1.11A.0006.P05 date: 08/25/98 CPU: Topology: Single Core model: Pentium II (Deschutes) bits: 32 type: MCP arch: P6 II Deschutes rev: 1 L2 cache: 512 KiB flags: pae bogomips: 696 Speed: 348 MHz min/max: N/A Core speed (MHz): 1: 348 Graphics: Device-1: NVIDIA NV34 [GeForce FX 5200 Ultra] driver: nvidiafb v: kernel bus ID: 01:00.0 Display: server: X.Org 1.19.2 driver: fbdev,nouveau unloaded: modesetting,vesa resolution: 1024x768~85Hz OpenGL: renderer: N/A v: N/A direct render: N/A Audio: Device-1: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator] driver: N/A bus ID: 00:0b.0 Device-2: Ensoniq ES1370 [AudioPCI] driver: snd_ens1370 v: kernel bus ID: 00:0e.0 Sound Server: ALSA v: k4.9.126-antix.1-486-smp Network: Device-1: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: piix4_smbus v: N/A port: 1020 bus ID: 00:07.3 Device-2: Ralink RT2500 Wireless 802.11bg driver: rt2500pci v: 2.3.0 port: 1020 bus ID: 00:0d.0 IF: wlan0 state: up mac: <filter> Drives: Local Storage: total: 39.22 GiB used: 2.57 GiB (6.6%) ID-1: /dev/sda vendor: Western Digital model: WD400BB-75CLB0 size: 37.27 GiB ID-2: /dev/sdb type: USB vendor: Generic model: USB 2.0 size: 1.95 GiB Partition: ID-1: / size: 34.44 GiB used: 2.55 GiB (7.4%) fs: ext4 dev: /dev/sda1 ID-2: swap-1 size: 2.00 GiB used: 23.0 MiB (1.1%) fs: swap dev: /dev/sda2 Sensors: System Temperatures: cpu: 27.8 C mobo: N/A Fan Speeds (RPM): N/A Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://iso.mxrepo.com/antix/stretch stretch main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.mx.debian.org/debian/ stretch-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.mx.debian.org/debian/ stretch main contrib non-free 2: deb http://security.debian.org/ stretch/updates main contrib non-free No active apt repos in: /etc/apt/sources.list.d/onion.list No active apt repos in: /etc/apt/sources.list.d/various.list Info: Processes: 125 Uptime: 30m Memory: 306.2 MiB used: 190.6 MiB (62.3%) Init: SysVinit runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.25- This reply was modified 4 years, 5 months ago by rokytnji.
Richard
On a fresh (yesterday) install of antiX-17.2, SpaceFM/Fluxbox
there has appeared this empty antixsources.desktop file on the desktop.It doesn’t appear to cause any problem except to my mind.
Does someone have an idea how to stop it from occurring?richard@antix172:~
$ inxi -Fxzr
System:
Host: antix172 Kernel: 4.19.4-antix.1-486-smp i686 bits: 32 compiler: gcc v: 6.3.0
Desktop: Fluxbox 1.3.5 Distro: antiX-17.2_386-full Helen Keller 4 October 2018
base: Debian GNU/Linux 9 (stretch)
Machine:
Type: Other-vm? System: Acer product: AOA150 v: 1 serial: <filter>
Mobo: Acer model: N/A serial: <filter> BIOS: Acer v: 0.3301 date: 05/09/2008
Battery:
ID-1: BAT1 charge: 20.2 Wh condition: 20.2/45.5 Wh (44%) model: SIMPLO UM08B74
status: Full
CPU:
Topology: Single Core model: Intel Atom N270 bits: 32 type: MT arch: Bonnell rev: 2
L2 cache: 512 KiB
flags: pae sse sse2 sse3 ssse3 bogomips: 6384
Speed: 831 MHz min/max: 800/1600 MHz Core speeds (MHz): 1: 837 2: 822
Graphics:
Device-1: Intel Mobile 945GSE Express Integrated Graphics driver: i915 v: kernel
bus ID: 00:02.0
Display: server: X.Org 1.19.2 driver: intel unloaded: fbdev,modesetting,vesa
resolution: 1024×600~60Hz
OpenGL: renderer: Mesa DRI Intel 945GME x86/MMX/SSE2 v: 2.1 Mesa 13.0.6
direct render: Yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio driver: snd_hda_intel
v: kernel bus ID: 00:1b.0
Sound Server: ALSA v: k4.19.4-antix.1-486-smp
Network:
Device-1: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet driver: r8169
v: kernel port: 3000 bus ID: 02:00.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Device-2: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter driver: ath5k
v: kernel port: 3000 bus ID: 03:00.0
IF: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 150.88 GiB used: 6.15 GiB (4.1%)
ID-1: /dev/mmcblk0 model: SD02G size: 1.83 GiB
ID-2: /dev/sda vendor: Hitachi model: HTS543216L9A300 size: 149.05 GiB
Partition:
ID-1: / size: 20.06 GiB used: 4.58 GiB (22.8%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 1.59 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda4
Sensors:
System Temperatures: cpu: 44.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://mirror.cedia.org.ec/mx-workspace/antix/stretch/ stretch main nosystemd nonfree
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.br.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.br.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.list
No active apt repos in: /etc/apt/sources.list.d/vivaldi.list
Info:
Processes: 106 Uptime: 23m Memory: 986.0 MiB used: 109.7 MiB (11.1%) Init: SysVinit
runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.25ASUSTeK 900 EeePC; RAM: 1.96 GiB;
antiX19.3; 4.9.235-antix.1-486-smp;
HDD: Super Talent STT 30.08 GiB
+SD & External HDD.In reply to: empty antixsources.desktop file on desktop
Richard
On a fresh (yesterday) install of antiX-17.2, SpaceFM/Fluxbox
there has appeared this empty anixsources.desktop file on the desktop.It doesn’t appear to cause any problem except to my mind.
Does someone have an idea how to stop it from occurring?richard@antix172:~
$ inxi -Fxzr
System:
Host: antix172 Kernel: 4.19.4-antix.1-486-smp i686 bits: 32 compiler: gcc v: 6.3.0
Desktop: Fluxbox 1.3.5 Distro: antiX-17.2_386-full Helen Keller 4 October 2018
base: Debian GNU/Linux 9 (stretch)
Machine:
Type: Other-vm? System: Acer product: AOA150 v: 1 serial: <filter>
Mobo: Acer model: N/A serial: <filter> BIOS: Acer v: 0.3301 date: 05/09/2008
Battery:
ID-1: BAT1 charge: 20.2 Wh condition: 20.2/45.5 Wh (44%) model: SIMPLO UM08B74
status: Full
CPU:
Topology: Single Core model: Intel Atom N270 bits: 32 type: MT arch: Bonnell rev: 2
L2 cache: 512 KiB
flags: pae sse sse2 sse3 ssse3 bogomips: 6384
Speed: 831 MHz min/max: 800/1600 MHz Core speeds (MHz): 1: 837 2: 822
Graphics:
Device-1: Intel Mobile 945GSE Express Integrated Graphics driver: i915 v: kernel
bus ID: 00:02.0
Display: server: X.Org 1.19.2 driver: intel unloaded: fbdev,modesetting,vesa
resolution: 1024×600~60Hz
OpenGL: renderer: Mesa DRI Intel 945GME x86/MMX/SSE2 v: 2.1 Mesa 13.0.6
direct render: Yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio driver: snd_hda_intel
v: kernel bus ID: 00:1b.0
Sound Server: ALSA v: k4.19.4-antix.1-486-smp
Network:
Device-1: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet driver: r8169
v: kernel port: 3000 bus ID: 02:00.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Device-2: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter driver: ath5k
v: kernel port: 3000 bus ID: 03:00.0
IF: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 150.88 GiB used: 6.15 GiB (4.1%)
ID-1: /dev/mmcblk0 model: SD02G size: 1.83 GiB
ID-2: /dev/sda vendor: Hitachi model: HTS543216L9A300 size: 149.05 GiB
Partition:
ID-1: / size: 20.06 GiB used: 4.58 GiB (22.8%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 1.59 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda4
Sensors:
System Temperatures: cpu: 44.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://mirror.cedia.org.ec/mx-workspace/antix/stretch/ stretch main nosystemd nonfree
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.br.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.br.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.list
No active apt repos in: /etc/apt/sources.list.d/vivaldi.list
Info:
Processes: 106 Uptime: 23m Memory: 986.0 MiB used: 109.7 MiB (11.1%) Init: SysVinit
runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.25ASUSTeK 900 EeePC; RAM: 1.96 GiB;
antiX19.3; 4.9.235-antix.1-486-smp;
HDD: Super Talent STT 30.08 GiB
+SD & External HDD.Richard
On a fresh (yesterday) install of antiX-17.2, SpaceFM/Fluxbox
there has appeared this empty anixsources.desktop file on the desktop.It doesn’t appear to cause any problem except to my mind.
Does someone have an idea how to stop it from occurring?richard@antix172:~
$ inxi -Fxzr
System:
Host: antix172 Kernel: 4.19.4-antix.1-486-smp i686 bits: 32 compiler: gcc v: 6.3.0
Desktop: Fluxbox 1.3.5 Distro: antiX-17.2_386-full Helen Keller 4 October 2018
base: Debian GNU/Linux 9 (stretch)
Machine:
Type: Other-vm? System: Acer product: AOA150 v: 1 serial: <filter>
Mobo: Acer model: N/A serial: <filter> BIOS: Acer v: 0.3301 date: 05/09/2008
Battery:
ID-1: BAT1 charge: 20.2 Wh condition: 20.2/45.5 Wh (44%) model: SIMPLO UM08B74
status: Full
CPU:
Topology: Single Core model: Intel Atom N270 bits: 32 type: MT arch: Bonnell rev: 2
L2 cache: 512 KiB
flags: pae sse sse2 sse3 ssse3 bogomips: 6384
Speed: 831 MHz min/max: 800/1600 MHz Core speeds (MHz): 1: 837 2: 822
Graphics:
Device-1: Intel Mobile 945GSE Express Integrated Graphics driver: i915 v: kernel
bus ID: 00:02.0
Display: server: X.Org 1.19.2 driver: intel unloaded: fbdev,modesetting,vesa
resolution: 1024×600~60Hz
OpenGL: renderer: Mesa DRI Intel 945GME x86/MMX/SSE2 v: 2.1 Mesa 13.0.6
direct render: Yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio driver: snd_hda_intel
v: kernel bus ID: 00:1b.0
Sound Server: ALSA v: k4.19.4-antix.1-486-smp
Network:
Device-1: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet driver: r8169
v: kernel port: 3000 bus ID: 02:00.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Device-2: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter driver: ath5k
v: kernel port: 3000 bus ID: 03:00.0
IF: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 150.88 GiB used: 6.15 GiB (4.1%)
ID-1: /dev/mmcblk0 model: SD02G size: 1.83 GiB
ID-2: /dev/sda vendor: Hitachi model: HTS543216L9A300 size: 149.05 GiB
Partition:
ID-1: / size: 20.06 GiB used: 4.58 GiB (22.8%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 1.59 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda4
Sensors:
System Temperatures: cpu: 44.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://mirror.cedia.org.ec/mx-workspace/antix/stretch/ stretch main nosystemd nonfree
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.br.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.br.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.list
No active apt repos in: /etc/apt/sources.list.d/vivaldi.list
Info:
Processes: 106 Uptime: 23m Memory: 986.0 MiB used: 109.7 MiB (11.1%) Init: SysVinit
runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.25- This topic was modified 4 years, 5 months ago by Richard.
- This topic was modified 4 years, 5 months ago by Richard.
- This topic was modified 4 years, 5 months ago by Richard.
ASUSTeK 900 EeePC; RAM: 1.96 GiB;
antiX19.3; 4.9.235-antix.1-486-smp;
HDD: Super Talent STT 30.08 GiB
+SD & External HDD.In reply to: Package upgrades make AntiX installation unusable
bci
Thanks for the video link; though for some weird reason, I suspect that grub has nothing to do with it –
I had actually done that particular update before my system had borked, and everything was fine; I was even using Sid! I had
come to suspect that Sid was to blame, so I had done a fresh install using Stretch, and to my surprise, the same thing was happening.One thing I at least had noticed in Sid was that I could use, say, Ctrl+Alt+F1 or +F2 to get to a login terminal, and actually still use my system from there;
I just could never get into X. Now, it’s even worse – it just shows a black screen, as if no image had loaded, and I can’t get into my ttys.Here are the requested outputs.
brandon@antix1:~
$ inxi -Fxzr
———————————————————————————System: Host: antix1 Kernel: 4.9.126-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 6.3.0 Desktop: IceWM 1.4.2 Distro: antiX-17.2_x64-full Helen Keller 4 October 2018 base: Debian GNU/Linux 9 (stretch) Machine: Type: Laptop System: LENOVO product: 2985FCU v: ThinkPad X201 Tablet serial: <filter> Mobo: LENOVO model: 2985FCU serial: <filter> BIOS: LENOVO v: 6QET70WW (1.40 ) date: 10/11/2012 Battery: ID-1: BAT0 charge: 50.8 Wh condition: 51.4/66.2 Wh (78%) model: SANYO 42T4658 status: Unknown CPU: Topology: Dual Core model: Intel Core i5 U 520 bits: 64 type: MT MCP arch: Nehalem rev: 5 L2 cache: 3072 KiB flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 8514 Speed: 666 MHz min/max: 666/1067 MHz Core speeds (MHz): 1: 666 2: 933 3: 933 4: 666 Graphics: Device-1: Intel Core Processor Integrated Graphics driver: i915 v: kernel bus ID: 00:02.0 Display: server: X.Org 1.19.2 driver: intel resolution: 1280x800~60Hz OpenGL: renderer: Mesa DRI Intel Ironlake Mobile v: 2.1 Mesa 13.0.6 direct render: Yes Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio driver: snd_hda_intel v: kernel bus ID: 00:1b.0 Sound Server: ALSA v: k4.9.126-antix.1-amd64-smp Network: Device-1: Intel 82577LM Gigabit Network driver: e1000e v: 3.2.6-k port: 1820 bus ID: 00:19.0 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> Device-2: Intel Centrino Advanced-N 6200 driver: iwlwifi v: kernel port: 1880 bus ID: 02:00.0 IF: wlan0 state: down mac: <filter> Drives: Local Storage: total: 149.05 GiB used: 2.92 GiB (2.0%) ID-1: /dev/sda vendor: Western Digital model: WD1600BEVT-08A23T1 size: 149.05 GiB Partition: ID-1: / size: 143.71 GiB used: 2.92 GiB (2.0%) fs: ext4 dev: /dev/sda1 ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2 Sensors: System Temperatures: cpu: 55.0 C mobo: 0.0 C Fan Speeds (RPM): cpu: 4331 Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://repo.antixlinux.com/stretch stretch main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.us.debian.org/debian/ stretch-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.us.debian.org/debian/ stretch main contrib non-free 2: deb http://security.debian.org/ stretch/updates main contrib non-free No active apt repos in: /etc/apt/sources.list.d/onion.list No active apt repos in: /etc/apt/sources.list.d/various.list Info: Processes: 187 Uptime: 14m Memory: 3.66 GiB used: 723.2 MiB (19.3%) Init: SysVinit runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.25——————————————————————————————
root@antix1:/home/brandon# apt-get update && apt-get dist-upgrade
——————————————————————————————–Get:1 http://security.debian.org stretch/updates InRelease [94.3 kB] Get:2 http://repo.antixlinux.com/stretch stretch InRelease [27.4 kB] Get:3 http://security.debian.org stretch/updates/main i386 Packages [462 kB] Get:4 http://security.debian.org stretch/updates/main amd64 Packages [460 kB] Get:5 http://security.debian.org stretch/updates/main Translation-en [200 kB] Get:6 http://security.debian.org stretch/updates/contrib amd64 Packages [1,760 B] Get:7 http://security.debian.org stretch/updates/contrib i386 Packages [1,764 B] Get:8 http://security.debian.org stretch/updates/contrib Translation-en [1,759 B] Get:9 http://security.debian.org stretch/updates/non-free i386 Packages [1,600 B] Get:10 http://security.debian.org stretch/updates/non-free amd64 Packages [1,600 B] Get:11 http://security.debian.org stretch/updates/non-free Translation-en [691 B] Get:12 http://repo.antixlinux.com/stretch stretch/main i386 Packages [173 kB] Get:13 http://ftp.us.debian.org/debian stretch-updates InRelease [91.0 kB] Ign:14 http://ftp.us.debian.org/debian stretch InRelease Get:15 http://ftp.us.debian.org/debian stretch Release [118 kB] Get:16 http://ftp.us.debian.org/debian stretch Release.gpg [2,434 B] Get:17 http://ftp.us.debian.org/debian stretch-updates/main i386 Packages [5,160 B] Get:18 http://ftp.us.debian.org/debian stretch-updates/main amd64 Packages [5,152 B] Get:19 http://ftp.us.debian.org/debian stretch-updates/main Translation-en [4,512 B] Get:20 http://repo.antixlinux.com/stretch stretch/main amd64 Packages [169 kB] Get:21 http://ftp.us.debian.org/debian stretch/main amd64 Packages [7,089 kB] Get:22 http://repo.antixlinux.com/stretch stretch/nosystemd amd64 Packages [144 kB] Get:23 http://repo.antixlinux.com/stretch stretch/nosystemd i386 Packages [144 kB] Get:24 http://repo.antixlinux.com/stretch stretch/nonfree amd64 Packages [25.0 kB] Get:25 http://repo.antixlinux.com/stretch stretch/nonfree i386 Packages [25.9 kB] Get:26 http://ftp.us.debian.org/debian stretch/main i386 Packages [7,069 kB] Get:27 http://ftp.us.debian.org/debian stretch/main Translation-en [5,388 kB] Get:28 http://ftp.us.debian.org/debian stretch/contrib amd64 Packages [50.9 kB] Get:29 http://ftp.us.debian.org/debian stretch/contrib i386 Packages [47.9 kB] Get:30 http://ftp.us.debian.org/debian stretch/contrib Translation-en [45.9 kB] Get:31 http://ftp.us.debian.org/debian stretch/non-free i386 Packages [69.6 kB] Get:32 http://ftp.us.debian.org/debian stretch/non-free amd64 Packages [78.6 kB] Get:33 http://ftp.us.debian.org/debian stretch/non-free Translation-en [80.4 kB] Fetched 22.1 MB in 10s (2,086 kB/s) Reading package lists... Done Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following package was automatically installed and is no longer required: livestreamer Use 'apt autoremove' to remove it. The following NEW packages will be installed: python3-isodate The following packages will be upgraded: adobe-flash-properties-gtk adobe-flashplugin antix-installer base-files cli-installer-antix curl ddm-mx dirmngr faq-docs-antix firefox-esr firmware-amd-graphics firmware-atheros firmware-bnx2 firmware-bnx2x firmware-brcm80211 firmware-intelwimax firmware-ipw2x00 firmware-iwlwifi firmware-libertas firmware-linux-nonfree firmware-misc-nonfree firmware-myricom firmware-netxen firmware-qlogic firmware-realtek fuse ghostscript gnupg gnupg-agent gnupg2 gpgv grub-common grub-efi-amd64-bin grub-efi-ia32-bin grub-pc grub-pc-bin grub2-common hdparm imagemagick imagemagick-6-common imagemagick-6.q16 installer-data-antix libcmd libcurl3 libcurl3-gnutls libfuse2 libgd3 libgnutls30 libgs9 libgs9-common libmagickcore-6.q16-3 libmagickwand-6.q16-3 libnss-myhostname libopenmpt0 libperl5.24 libseccomp2 libsnmp-base libsnmp30 libssh-gcrypt-4 libtirpc1 libx11-6 libx11-data libx11-xcb1 libxapian30 libxcursor1 linux-libc-dev livestreamer mupdf packageinstaller-pkglist perl perl-base perl-modules-5.24 python3-streamlink remaster-antix repo-manager set-dpi-antix streamlight-antix streamlink tzdata xlockmore xserver-common xserver-xorg-core xserver-xorg-legacy youtube-dl 84 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 137 MB of archives. After this operation, 1,010 kB of additional disk space will be used. Do you want to continue? [Y/n] n Abort.————————————————————————————————
In reply to: Audio Config Not Retained on Reboot
jeb.jr
inxi -F -x
System: Host: antixEEEpc Kernel: 4.9.126-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 6.3.0 Desktop: IceWM 1.4.2 Distro: antiX-17.2_x64-full Helen Keller 4 October 2018 base: Debian GNU/Linux 9 (stretch) Machine: Type: Laptop System: ASUSTeK product: 1015PX v: x.x serial: <root required> Mobo: ASUSTeK model: 1015PE v: x.xx serial: <root required> BIOS: American Megatrends v: 1101 date: 02/18/2011 Battery: ID-1: BAT0 charge: 29.9 Wh condition: 54.0/56.2 Wh (96%) model: ASUS 1015PE status: Discharging CPU: Topology: Dual Core model: Intel Atom N570 bits: 64 type: MT MCP arch: Bonnell rev: A L2 cache: 512 KiB flags: lm nx pae sse sse2 sse3 ssse3 vmx bogomips: 13339 Speed: 1000 MHz min/max: 1000/1667 MHz Core speeds (MHz): 1: 1000 2: 1333 3: 1000 4: 1333 Graphics: Device-1: Intel Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics driver: i915 v: kernel bus ID: 00:02.0 Display: server: X.Org 1.19.2 driver: intel resolution: 1024x600~60Hz OpenGL: renderer: Mesa DRI Intel Pineview M v: 2.1 Mesa 13.0.6 direct render: Yes Audio: Device-1: Intel NM10/ICH7 Family High Definition Audio driver: snd_hda_intel v: kernel bus ID: 00:1b.0 Sound Server: ALSA v: k4.9.126-antix.1-amd64-smp Network: Device-1: Qualcomm Atheros AR8152 v2.0 Fast Ethernet driver: atl1c v: 1.0.1.1-NAPI port: ec00 bus ID: 01:00.0 IF: eth0 state: down mac: f4:6d:04:b8:94:8a Device-2: Broadcom Limited BCM4313 802.11bgn Wireless Network Adapter driver: wl v: kernel port: ec00 bus ID: 02:00.0 IF: wlan0 state: down mac: e0:b9:a5:30:19:1f Drives: Local Storage: total: 111.79 GiB used: 3.33 GiB (3.0%) ID-1: /dev/sda vendor: PNY model: CS1311 120GB SSD size: 111.79 GiB Partition: ID-1: / size: 23.91 GiB used: 3.33 GiB (13.9%) fs: ext4 dev: /dev/sda3 ID-2: swap-1 size: 4.30 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5 Sensors: System Temperatures: cpu: 53.0 C mobo: N/A Fan Speeds (RPM): cpu: 3937 Info: Processes: 182 Uptime: 3m Memory: 1.95 GiB used: 152.9 MiB (7.7%) Init: SysVinit runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.25- This reply was modified 4 years, 5 months ago by jeb.jr. Reason: Trying to get code to be formatted as code ???
AntiX Target System:
Asus EeePC 1015PX
1.6GHz Intel Atom 2-core 4-thread processor
2GB RAM
128GB PNY SSD
Intel GMA3150 Integrated Graphics, 1024x600In reply to: [Solved] Run WICD On Startup
jeb.jr
System: Host: antixEEEpc Kernel: 4.9.126-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 6.3.0 Desktop: IceWM 1.4.2 Distro: antiX-17.2_x64-full Helen Keller 4 October 2018 base: Debian GNU/Linux 9 (stretch) Machine: Type: Laptop System: ASUSTeK product: 1015PX v: x.x serial: <root required> Mobo: ASUSTeK model: 1015PE v: x.xx serial: <root required> BIOS: American Megatrends v: 1101 date: 02/18/2011 Battery: ID-1: BAT0 charge: 29.9 Wh condition: 54.0/56.2 Wh (96%) model: ASUS 1015PE status: Discharging CPU: Topology: Dual Core model: Intel Atom N570 bits: 64 type: MT MCP arch: Bonnell rev: A L2 cache: 512 KiB flags: lm nx pae sse sse2 sse3 ssse3 vmx bogomips: 13339 Speed: 1000 MHz min/max: 1000/1667 MHz Core speeds (MHz): 1: 1000 2: 1333 3: 1000 4: 1333 Graphics: Device-1: Intel Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics driver: i915 v: kernel bus ID: 00:02.0 Display: server: X.Org 1.19.2 driver: intel resolution: 1024x600~60Hz OpenGL: renderer: Mesa DRI Intel Pineview M v: 2.1 Mesa 13.0.6 direct render: Yes Audio: Device-1: Intel NM10/ICH7 Family High Definition Audio driver: snd_hda_intel v: kernel bus ID: 00:1b.0 Sound Server: ALSA v: k4.9.126-antix.1-amd64-smp Network: Device-1: Qualcomm Atheros AR8152 v2.0 Fast Ethernet driver: atl1c v: 1.0.1.1-NAPI port: ec00 bus ID: 01:00.0 IF: eth0 state: down mac: f4:6d:04:b8:94:8a Device-2: Broadcom Limited BCM4313 802.11bgn Wireless Network Adapter driver: wl v: kernel port: ec00 bus ID: 02:00.0 IF: wlan0 state: down mac: e0:b9:a5:30:19:1f Drives: Local Storage: total: 111.79 GiB used: 3.33 GiB (3.0%) ID-1: /dev/sda vendor: PNY model: CS1311 120GB SSD size: 111.79 GiB Partition: ID-1: / size: 23.91 GiB used: 3.33 GiB (13.9%) fs: ext4 dev: /dev/sda3 ID-2: swap-1 size: 4.30 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5 Sensors: System Temperatures: cpu: 53.0 C mobo: N/A Fan Speeds (RPM): cpu: 3937 Info: Processes: 182 Uptime: 3m Memory: 1.95 GiB used: 152.9 MiB (7.7%) Init: SysVinit runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.25AntiX Target System:
Asus EeePC 1015PX
1.6GHz Intel Atom 2-core 4-thread processor
2GB RAM
128GB PNY SSD
Intel GMA3150 Integrated Graphics, 1024x600djringjr
I have antiX-17.1 CLI installer running from CD.
I am using anti-x core and I want to install just a Command Line installation.
I have a formatted ext4 hard drive formatted for /, /home and swap.
When I run cli-installer I get this error.
cp: error writing ‘./filename’: No space left on device.
Is there a previous version that works?
I installed anti-X full and it installs OK, but I couldn’t remove all the graphical user interface programs.
I want CLI only.
Thanks,
David
fatmac
My first thought is to ensure the download is good, check the md5sum.
Create the USB installer with/using dd. (There used to be a Windows version.)
Boot the live USB first, create a swap partition, (1GB), & a partition for the installation.
Then use the installer.That machine likely has only got USB 1.1, so it’ll be a slow process.
Linux (& BSD) since 1999
In reply to: Hello again
dirkd
I had a very frustrating day today. My new Antix17 deteriorated with every new boot: hangups in Spacefm, Firefox and other programs… Unetbootin and Live USB Maker no longer working. I had to make a unetbootin stick with my old Antix15 system, and that one gave an error message when booting from it (‘Not a com32R image’). Wasted lots of time, but in the end I had a clean Antix 17.2 (x64) install from the iso, without any customisation whatsoever of the live system before install. For the moment I don’t have any problems at all. Startup and shutdown times are as good or even better than with Antix15 32 bit (45 sec. and 1ess than 10 sec. respectively). This is what I’ve done so far:
Installation Antix 17.2 ======================= * Clean install from iso with unetbootin * Root partition says Antix 17.1! $ inxi -Fxz System: Host: dokux Kernel: 4.9.126-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 6.3.0 Desktop: IceWM 1.4.2 Distro: antiX-17.2_x64-full Helen Keller 4 October 2018 base: Debian GNU/Linux 9 (stretch) Machine: Type: Desktop Mobo: ASUSTeK model: P5QL PRO v: Rev 1.xx serial: <filter> BIOS: American Megatrends v: 0902 date: 11/28/2008 CPU: Topology: Dual Core model: Intel Core2 Duo E7400 bits: 64 type: MCP arch: Penryn rev: A L2 cache: 3072 KiB flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 bogomips: 11177 Speed: 1870 MHz min/max: 1603/2800 MHz Core speeds (MHz): 1: 1870 2: 2136 Graphics: Device-1: NVIDIA G98 [GeForce 8400 GS Rev. 2] driver: nouveau v: kernel bus ID: 01:00.0 Display: server: X.Org 1.19.2 driver: nouveau unloaded: fbdev,modesetting,vesa resolution: 1280x1024~60Hz OpenGL: renderer: Gallium 0.4 on NV98 v: 3.3 Mesa 13.0.6 direct render: Yes Audio: Device-1: Intel 82801JI HD Audio driver: snd_hda_intel v: kernel bus ID: 00:1b.0 Sound Server: ALSA v: k4.9.126-antix.1-amd64-smp Network: Device-1: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet driver: ATL1E v: N/A port: cc00 bus ID: 02:00.0 IF: eth0 state: down mac: <filter> Device-2: D-Link System DWA-140 RangeBooster N Adapter(rev.B1) [Ralink RT2870] type: USB driver: rt2800usb bus ID: 2-3:4 IF: wlan0 state: up mac: <filter> Drives: Local Storage: total: 3.68 TiB used: 358.94 GiB (9.5%) ID-1: /dev/sda vendor: Western Digital model: WD5000AAKS-00UU3A0 size: 465.76 GiB ID-2: /dev/sdb vendor: Intel model: SSDSA2CT040G3 size: 37.27 GiB ID-3: /dev/sdc vendor: Samsung model: HD753LJ size: 698.64 GiB ID-4: /dev/sdd vendor: Western Digital model: WD6401AALS-00E8B0 size: 596.17 GiB ID-5: /dev/sde vendor: Kingston model: SV300S37A120G size: 111.79 GiB ID-6: /dev/sdf vendor: Western Digital model: WD20EZRZ-00Z5HB0 size: 1.82 TiB RAID: Hardware-1: VIA VT6421 IDE/SATA Controller driver: sata_via v: 2.6 bus ID: 05:02.0 Partition: ID-1: / size: 36.44 GiB used: 2.90 GiB (8.0%) fs: ext4 dev: /dev/sdb1 ID-2: swap-1 size: 2.02 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sde2 Sensors: System Temperatures: cpu: 38.0 C mobo: N/A gpu: nouveau temp: 69 C Fan Speeds (RPM): N/A Info: Processes: 205 Uptime: 16m Memory: 3.86 GiB used: 476.4 MiB (12.0%) Init: SysVinit runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.25 * Make links in home folder * Configure wifi: OK * Edit /lib/udev/rules.d/97-hid2hci.rules to support my Logitech keyboard and mouse * Change fluxbox style to Radiant (normal) * Reboot to test keyboard and mouse (OK) * Edit fstab and mount all partitions. Reboot (OK) * Copy configurationfiles for fluxbox and conky Background of the conky window changes more slowly than in Antix15 * Startup timed: ~45 seconds - Shutdown timed: less than 10 seconds (the same or even slightly better than Antix 15)I can confirm that the conky background is changing more slowly then in Antix15. And maybe I know why. In Antix15 I had Conky 1.10.2. Now Synaptic says I have Conky-legacy-all 1:1.9.0-6. So it seems I have a different versionn of conky after all.
In reply to: Trouble with usb-ports
Tube
Greeting caprea,
thank you for your posting advises.I cleaned my PC very carefully, dust cant be a problem.
inxi -zv7 System: Host: bob Kernel: 4.10.5-antix.1-486-smp i686 bits: 32 compiler: gcc v: 6.3.0 Desktop: IceWM 1.4.2 info: icewmtray dm: SLiM 1.3.4 Distro: antiX-17.1_386-full Heather Heyer 17 March 2018 base: Debian GNU/Linux 9 (stretch) Machine: Type: Other-vm? System: Acer product: AOA150 v: 1 serial: <filter> Mobo: Acer model: N/A serial: N/A BIOS: Acer v: 0.3310 date: 10/06/2008 Memory: RAM: total: 990.5 MiB used: 111.5 MiB (11.3%) Array-1: capacity: 4 GiB slots: 2 EC: None max module size: 2 GiB Device-1: CHAN A DIMM 0 size: 512 MiB info: single-bank speed: 533 MHz type: DDR2 detail: synchronous bus width: 64 bits total: 64 bits manufacturer: 0xAD00000000000000 part-no: 0x48594D503136345336344350362D59352020 serial: <filter> Device-2: CHAN A DIMM 1 size: 512 MiB info: single-bank speed: 533 MHz type: DDR2 detail: synchronous bus width: 64 bits total: 64 bits manufacturer: 0xCE00000000000000 part-no: 0x4D342037305436353534455A332D43453620 serial: <filter> CPU: Topology: Single Core model: Intel Atom N270 bits: 32 type: MT arch: Bonnell rev: 2 L1 cache: 32 KiB L2 cache: 512 KiB bogomips: 6383 Speed: 800 MHz min/max: 800/1600 MHz Core speeds (MHz): 1: 1600 2: 800 Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx8 de ds_cpl dtes64 dtherm dts est fpu fxsr ht lahf_lm mca mce mmx monitor movbe msr mtrr pae pat pbe pdcm pebs pge pni sep ss sse sse2 ssse3 tm tm2 tsc vme xtpr Graphics: Device-1: Intel Mobile 945GSE Express Integrated Graphics vendor: Acer Incorporated ALI driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:27ae Display: server: X.Org 1.19.2 driver: intel unloaded: fbdev,modesetting,vesa resolution: 1024x600~60Hz OpenGL: renderer: Mesa DRI Intel 945GME x86/MMX/SSE2 v: 2.1 Mesa 13.0.6 direct render: Yes Audio: Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8 Sound Server: ALSA v: k4.10.5-antix.1-486-smp Network: Device-1: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet vendor: Acer Incorporated ALI driver: r8169 v: 2.3LK-NAPI port: 3000 bus ID: 02:00.0 chip ID: 10ec:8136 IF: eth0 state: down mac: <filter> Device-2: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter vendor: Foxconn driver: ath5k v: kernel port: 3000 bus ID: 03:00.0 chip ID: 168c:001c IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> type: mngtmpaddr dynamic scope: global IP v6: <filter> scope: link WAN IP: <filter> Drives: Local Storage: total: 111.79 GiB used: 4.34 GiB (3.9%) ID-1: /dev/sda vendor: Western Digital model: WD1200BEVS-22UST0 size: 111.79 GiB speed: <unknown> serial: <filter> rev: 1A01 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / size: 107.53 GiB used: 4.34 GiB (4.0%) fs: ext4 dev: /dev/sda1 label: rootantiX uuid: 5dc40bbf-336a-49c4-8ce9-66d0d67df7ab ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2 label: antiXswap uuid: ecd3f51b-2a98-4ef9-9582-b4f214c79e6d Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Device-1: 1-5:2 info: Suyin Acer CrystalEye Webcam type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 064e:d101 serial: <filter> Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Sensors: System Temperatures: cpu: 50.0 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 136 Uptime: 10m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0 alt: 6 Shell: bash (sudo) v: 4.4.12 running in: lxterminal inxi: 3.0.25Topic: Trouble with usb-ports
Hello there …,
at the moment Im trying to fix my USB-ports.
While booting he says to me: usb is over-current condition
I tried to edit /etc/default/grub and add ehci_hcd.ignore_oc=1 and similiar stuff.It doesn’t work.
I plugged USB-devices with led and the leds been off.
My Computer:
<em>lshw bob description: Computer product: AOA150 (Napa_Fab5) vendor: Acer version: 1 serial: LUS050B080832118772535 width: 32 bits capabilities: smbios-2.4 dmi-2.4 configuration: boot=normal family=Intel_Mobile sku=Napa_Fab5 uuid=40ED5F05-D464-DD11-9592-001E68BB7A2E *-core description: Motherboard vendor: Acer physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Acer physical id: 0 version: v0.3310 date: 10/06/2008 size: 1MiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb *-memory description: System Memory physical id: 14 slot: System board or motherboard size: 1GiB *-bank:0 description: DIMM DDR2 Synchronous 533 MHz (1,9 ns) product: HYMP164S64CP6-Y5 vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 serial: 0x00000000 slot: J2 size: 512MiB width: 64 bits clock: 533MHz (1.9ns) *-bank:1 description: DIMM DDR2 Synchronous 533 MHz (1,9 ns) product: M4 70T6554EZ3-CE6 vendor: Samsung physical id: 1 serial: 0x824BF9C3 slot: J6H2 size: 512MiB width: 64 bits clock: 533MHz (1.9ns) *-cpu description: CPU product: Intel(R) Atom(TM) CPU N270 @ 1.60GHz vendor: Intel Corp. physical id: 1c bus info: cpu@0 version: 6.12.2 serial: 0001-06C2-0000-0000-0000-0000 slot: CPU size: 1333MHz capacity: 1600MHz width: 32 bits clock: 533MHz capabilities: fpu fpu_exception wp vme de tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm dtherm cpufreq configuration: id=0 *-cache:0 description: L2 cache physical id: 1d slot: Unknown size: 512KiB capacity: 512KiB capabilities: synchronous internal write-back unified configuration: level=2 *-cache:1 description: L1 cache physical id: 1e slot: Unknown size: 32KiB capacity: 32KiB capabilities: synchronous internal write-back instruction configuration: level=1 *-logicalcpu:0 description: Logical CPU physical id: 0.1 width: 32 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 0.2 width: 32 bits capabilities: logical *-pci description: Host bridge product: Mobile 945GSE Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz *-display:0 description: VGA compatible controller product: Mobile 945GSE Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:58480000-584fffff ioport:60c0(size=8) memory:40000000-4fffffff memory:58500000-5853ffff memory:c0000-dffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:58400000-5847ffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:29 memory:58540000-58543fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:24 ioport:5000(size=4096) memory:57300000-583fffff ioport:50000000(size=16777216) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:25 ioport:3000(size=8192) memory:56300000-572fffff ioport:51000000(size=17825792) *-network description: Ethernet interface product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 00:1e:68:bb:7a:2e size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:28 ioport:3000(size=256) memory:51010000-51010fff memory:51000000-5100ffff memory:56300000-5631ffff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:26 ioport:2000(size=4096) memory:55200000-562fffff ioport:52100000(size=16777216) *-network description: Wireless interface product: AR242x / AR542x Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 00:22:69:28:0f:c1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath5k driverversion=4.10.5-antix.1-486-smp firmware=N/A ip=192.168.178.32 latency=0 link=yes multicast=yes wireless=IEEE 802.11 resources: irq:18 memory:55200000-5520ffff *-pci:3 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:27 ioport:1000(size=4096) memory:54100000-551fffff ioport:53100000(size=16777216) *-generic:0 description: System peripheral product: SD/MMC Host Controller vendor: JMicron Technology Corp. physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=sdhci-pci latency=0 resources: irq:19 memory:54100300-541003ff memory:54108000-5410ffff *-generic:1 UNCLAIMED description: SD Host controller product: Standard SD Host Controller vendor: JMicron Technology Corp. physical id: 0.2 bus info: pci@0000:04:00.2 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi cap_list configuration: latency=0 resources: memory:54100200-541002ff *-generic:2 description: System peripheral product: MS Host Controller vendor: JMicron Technology Corp. physical id: 0.3 bus info: pci@0000:04:00.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=jmb38x_ms latency=0 resources: irq:19 memory:54100100-541001ff *-generic:3 UNCLAIMED description: System peripheral product: xD Host Controller vendor: JMicron Technology Corp. physical id: 0.4 bus info: pci@0000:04:00.4 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: latency=0 resources: memory:54100000-541000ff *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:6080(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:17 ioport:6060(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:6040(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:6020(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:16 memory:58544400-585447ff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:17 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:60a0(size=16) *-serial description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: driver=i801_smbus latency=0 resources: irq:17 ioport:6000(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: WDC WD1200BEVS-2 vendor: Western Digital physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 1A01 serial: WD-WXC608K40350 size: 111GiB (120GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=d5606abb *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 5dc40bbf-336a-49c4-8ce9-66d0d67df7ab size: 109GiB capacity: 109GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized configuration: created=2018-06-10 17:00:51 filesystem=ext4 label=rootantiX lastmountpoint=/ modified=2018-11-09 15:05:31 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2018-11-09 13:59:21 state=mounted *-volume:1 description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 1 serial: ecd3f51b-2a98-4ef9-9582-b4f214c79e6d size: 2GiB capacity: 2GiB capabilities: primary swap initialized configuration: filesystem=swap label=antiXswap pagesize=4096 </em>Hopefully someone has a good idea
- This topic was modified 4 years, 6 months ago by Tube.
Topic: Hello again
dirkd
Not really a new user, but first time on the new forum. I’ve been using 32bit Antix 15 for about three years now, and I’m fully satisfied. But recently Google Music Manager (not an Antix product of course) won’t let me connect with my Google account anymore. In fact, it seems Google Music Manager doesn’t like any 32 bit linux system anymore. So I decided that maybe it was time for an upgrade.
I’m currently reviewing 64 bit Antix 17, and I like it a lot. Some minor problems I had (mouse and rox panel configuration lost when rebooting) have been solved. It mostly just works out of the box now, without much need of tweaking the configuration files.
Still, I haven’t decided yet to make the switch. What do you think: would it be feasible to make a new start with 64 bit Antix 15 in 2018? Or would I be painting myself in a corner?
$ sudo inxi -Fxz [sudo] password for dd: System: Host: dokux Kernel: 4.9.87-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 6.3.0 Desktop: Fluxbox 1.3.5 Distro: antiX-17.1_x64-full Heather Heyer 17 March 2018 base: Debian GNU/Linux buster/sid Machine: Type: Desktop Mobo: ASUSTeK model: P5QL PRO v: Rev 1.xx serial: <filter> BIOS: American Megatrends v: 0902 date: 11/28/2008 CPU: Topology: Dual Core model: Intel Core2 Duo E7400 bits: 64 type: MCP arch: Penryn rev: A L2 cache: 3072 KiB flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 bogomips: 11177 Speed: 1603 MHz min/max: 1603/2800 MHz Core speeds (MHz): 1: 1603 2: 1870 Graphics: Device-1: NVIDIA G98 [GeForce 8400 GS Rev. 2] driver: nouveau v: kernel bus ID: 01:00.0 Display: server: X.Org 1.20.3 driver: modesetting unloaded: fbdev,vesa resolution: 1280x1024~60Hz OpenGL: renderer: NV98 v: 3.3 Mesa 18.1.9 direct render: Yes Audio: Device-1: Intel 82801JI HD Audio driver: snd_hda_intel v: kernel bus ID: 00:1b.0 Sound Server: ALSA v: k4.9.87-antix.1-amd64-smp Network: Device-1: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet driver: ATL1E v: N/A port: cc00 bus ID: 02:00.0 IF: eth0 state: down mac: <filter> Device-2: D-Link System DWA-140 RangeBooster N Adapter(rev.B1) [Ralink RT2870] type: USB driver: rt2800usb bus ID: 2-3:4 IF: wlan0 state: up mac: <filter> Drives: Local Storage: total: 3.70 TiB used: 1.33 TiB (35.9%) ID-1: /dev/sda vendor: Western Digital model: WD5000AAKS-00UU3A0 size: 465.76 GiB ID-2: /dev/sdb vendor: Intel model: SSDSA2CT040G3 size: 37.27 GiB ID-3: /dev/sdc vendor: Samsung model: HD753LJ size: 698.64 GiB ID-4: /dev/sdd vendor: Western Digital model: WD6401AALS-00E8B0 size: 596.17 GiB ID-5: /dev/sde vendor: Kingston model: SV300S37A120G size: 111.79 GiB ID-6: /dev/sdf vendor: Western Digital model: WD20EZRZ-00Z5HB0 size: 1.82 TiB ID-7: /dev/sdg type: USB vendor: Sony model: Storage Media size: 14.94 GiB RAID: Hardware-1: VIA VT6421 IDE/SATA Controller driver: sata_via v: 2.6 bus ID: 05:02.0 Partition: ID-1: / size: 36.44 GiB used: 6.76 GiB (18.6%) fs: ext4 dev: /dev/sdb1 ID-2: swap-1 size: 2.02 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sde2 Sensors: System Temperatures: cpu: 42.0 C mobo: N/A gpu: nouveau temp: 70 C Fan Speeds (RPM): N/A Info: Processes: 204 Uptime: 26m Memory: 3.86 GiB used: 838.7 MiB (21.2%) Init: SysVinit runlevel: 5 Compilers: gcc: 7.3.0 Shell: bash v: 4.4.23 inxi: 3.0.25$ inxi -r Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://repo.antixlinux.com/testing testing main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.be.debian.org/debian/ stretch-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.gr.debian.org/debian/ testing main contrib non-free 2: deb http://security.debian.org/ testing/updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main No active apt repos in: /etc/apt/sources.list.d/onion.list No active apt repos in: /etc/apt/sources.list.d/various.listIn reply to: Help with new wifi setup please
Budgie
Sorry for delay and many thanks for the reply. Not been able to do much so far and will have to save work from new wifi and send to the one which is working so am working on it.
I am using ceni to make a wifi connection and the new device is a TP-Link model TD-W9970 300 Mbps Wireless N, USB VDSL/ADSL Modem Router. However the device is not used for VDSL as we do not have a VDSL connection. We receive our wifi signal from a dish across the valley. (We are too far from cabinet for fibre connection) Upstream of remote dish there is another dish link and then a connection to high capacity fibre. AFAIK the dish on our house is simply an aeriel with a cat 5 connection which is plugged into one of the RJ45 sockets and at present I cannot access the web interface.
I can give you the code for terminal output as connected to my working broadband connection but will send the same from new connection later. BTW I cannot get [code] brackets to work yet,
alastair@antix1:~ $ inxi -F System: Host: antix1 Kernel: 4.10.5-antix.1-486-smp i686 bits: 32 Desktop: IceWM 1.4.2 Distro: antiX-17_386-base Heather Heyer 24 October 2017 Machine: Type: Laptop System: IBM product: 2373Q91 v: ThinkPad T42 serial: <root required> Mobo: IBM model: 2373Q91 serial: <root required> BIOS: IBM v: 1RETDRWW (3.23 ) date: 06/18/2007 Battery: ID-1: BAT0 charge: 48.5 Wh condition: 48.6/47.5 Wh (102%) CPU: Topology: Single Core model: Intel Pentium M bits: 32 type: MCP L2 cache: 2048 KiB Speed: 1200 MHz min/max: 600/1800 MHz Core speed (MHz): 1: 1200 Graphics: Device-1: AMD RV200/M7 [Mobility Radeon 7500] driver: radeon v: kernel Display: server: X.Org 1.19.2 driver: ati,radeon unloaded: fbdev,modesetting,vesa resolution: 1024x768~60Hz OpenGL: renderer: Mesa DRI R100 (RV200 4C57) x86/MMX/SSE2 DRI2 v: 1.3 Mesa 13.0.6 Audio: Device-1: Intel 82801DB/DBL/DBM AC97 Audio driver: snd_intel8x0 Sound Server: ALSA v: k4.10.5-antix.1-486-smp Network: Device-1: Intel 82540EP Gigabit Ethernet driver: e1000 IF: eth0 state: down mac: 00:11:25:86:fe:5f Device-2: Qualcomm Atheros AR5212 802.11abg NIC driver: ath5k IF: wlan0 state: up mac: 00:05:4e:4f:3c:7a Drives: Local Storage: total: 111.79 GiB used: 18.31 GiB (16.4%) ID-1: /dev/sda vendor: Toshiba model: MK1234GAX size: 111.79 GiB Partition: ID-1: / size: 9.78 GiB used: 4.42 GiB (45.2%) fs: ext4 dev: /dev/sda6 ID-2: /home size: 26.78 GiB used: 13.90 GiB (51.9%) fs: ext4 dev: /dev/sda7 ID-3: swap-1 size: 2.00 GiB used: 392 KiB (0.0%) fs: swap dev: /dev/sda8 Sensors: System Temperatures: cpu: 46.0 C mobo: 45.0 C Fan Speeds (RPM): cpu: 2974 Info: Processes: 135 Uptime: 37m Memory: 1002.4 MiB used: 572.1 MiB (57.1%) Shell: bash inxi: 3.0.25 alastair@antix1:~Will get more info as soon as possible but I am wondering if there is some proxy set up in windoze but not by default in linux. Just a thought as neither linus machine will connect to this new device but windoze does work,
Forum for users of antiX Linux. Mean and Lean and Proudly anti-fascist.
