a proper "hello"

Forum Forums New users Welcome to antiX a proper "hello"

  • This topic has 5 replies, 5 voices, and was last updated Dec 6-2:50 am by Anonymous.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #2981
    Member
    tlaloc77

      Hi all, I already spoke up under the Lurkers-thread but now I want a thread for myself so I can put my system information there:

      inxi -zv7
      System:    Host: antix1 Kernel: 4.10.5-antix.3-amd64-smp x86_64 bits: 64 gcc: 6.3.0
                 Desktop: IceWM 1.4.2 dm: slim Distro: antiX-17_x64-base Heather Heyer 24 October 2017
      Machine:   Device: laptop System: Hewlett-Packard product: HP EliteBook 8730w v: F.13 serial: N/A
                 Mobo: Hewlett-Packard model: 30EC v: KBC Version 91.25 serial: N/A
                 BIOS: Hewlett-Packard v: 68PAD Ver. F.13 date: 12/03/2010
                 Chassis: type: 10 serial: N/A
      CPU:       Dual core Intel Core2 Duo P8800 (-MCP-) arch: Penryn rev.10 cache: 3072 KB
                 flags: (lm nx sse sse2 sse3 sse4_1 ssse3 vmx) bmips: 10644
                 clock speeds: min/max: 800/2667 MHz 1: 800 MHz 2: 2133 MHz
      Memory:    Using dmidecode: root required for dmidecode
      Graphics:  Card: NVIDIA G94GLM [Quadro FX 2700M] bus-ID: 01:00.0 chip-ID: 10de:063a
                 Display Server: X.Org 1.19.2 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
                 Resolution: 1920x1200@59.95hz
                 OpenGL: renderer: Gallium 0.4 on NV94 version: 3.3 Mesa 13.0.6 (compat-v: 3.0) Direct Render: Yes
      Audio:     Card Intel 82801I (ICH9 Family) HD Audio Controller
                 driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:293e
                 Sound: Advanced Linux Sound Architecture v: k4.10.5-antix.3-amd64-smp
      Network:   Card: Intel 82567LM Gigabit Network Connection
                 driver: e1000e v: 3.2.6-k port: 80e0 bus-ID: 00:19.0 chip-ID: 8086:10f5
                 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
                 WAN IP: <filter>
                 IF: eth0 ip-v4: <filter> ip-v6-link: <filter>
      Drives:    HDD Total Size: 250.1GB (9.7% used)
                 ID-1: /dev/sda model: Hitachi_HTS72322 size: 250.1GB serial: <filter>
                 Optical-1: /dev/sr0 model: hp DVDRAM GT20L rev: DC05 dev-links: cdrom
                 Features: speed: 24x multisession: yes
                 audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
      Partition: ID-1: / size: 20G used: 5.4G (29%) fs: ext4 dev: /dev/sda5
                 label: antiX17-root uuid: 0adab1b2-5b4c-411a-a103-16f12b423171
                 ID-2: /home size: 18G used: 14G (84%) fs: ext3 dev: /dev/sda8
                 label: HOME-8730w uuid: d85b25c1-de64-4949-8b75-993219456f46
                 ID-3: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap dev: /dev/sda9
                 label: SWAP-8730w1 uuid: f8044540-17b5-47c9-81c5-978400bd6477
      RAID:      No RAID data (*1*)
                 /proc/mdstat missing-is md_mod kernel module loaded?
      Unmounted: ID-1: /dev/sda1 size: 0.10G label: System-reserviert uuid: E8D004C9D0049FC4
                 ID-2: /dev/sda2 size: 140.71G label: N/A uuid: 0830067630066B50
                 ID-3: /dev/sda3 size: 0.52G label: BOOT-8730w uuid: 34583114-36dc-4496-aeb3-41f5e6e84455
                 ID-4: /dev/sda6 size: 21.48G label: N/A uuid: b5d6120c-e9fd-4543-af17-32c01072f03d
                 ID-5: /dev/sda7 size: 42.94G label: home1 uuid: 43ddfe84-c47f-4084-bfc8-f937073655e6
      Sensors:   System Temperatures: cpu: 41.0C mobo: 30.0C gpu: 40.0
                 Fan Speeds (in rpm): cpu: N/A
      Info:      Processes: 174 Uptime: 1:28 Memory: 711.3/3918.9MB
                 Init: SysVinit v: 2.88 runlevel: 5 default: 5 Gcc sys: 6.3.0
                 Client: Shell (bash 4.4.121 running in lxterminal) inxi: 2.3.43

      (*1*): As soon as there is a colon behind “data” I get the following error at submitting:

      403 Forbidden
      A potentially unsafe operation has been detected in your request to this site.
      Generated by Wordfence at Thu, 23 Nov 2017 13:12:38 GMT.
      Your computer's time: Thu, 23 Nov 2017 13:12:38 GMT.

      No idea why “data” followed by a colon is considered unsafe. Maybe a measure against SQL injections that goes too far. Inserting a blank between “data” and the colon does not help.

      inxi -Fxz
      System:    Host: antix1 Kernel: 4.10.5-antix.3-amd64-smp x86_64 bits: 64 gcc: 6.3.0 Desktop: IceWM 1.4.2
                 Distro: antiX-17_x64-base Heather Heyer 24 October 2017
      Machine:   Device: laptop System: Hewlett-Packard product: HP EliteBook 8730w v: F.13 serial: N/A
                 Mobo: Hewlett-Packard model: 30EC v: KBC Version 91.25 serial: N/A
                 BIOS: Hewlett-Packard v: 68PAD Ver. F.13 date: 12/03/2010
      CPU:       Dual core Intel Core2 Duo P8800 (-MCP-) arch: Penryn rev.10 cache: 3072 KB
                 flags: (lm nx sse sse2 sse3 sse4_1 ssse3 vmx) bmips: 10644
                 clock speeds: max: 2667 MHz 1: 2133 MHz 2: 1600 MHz
      Graphics:  Card: NVIDIA G94GLM [Quadro FX 2700M] bus-ID: 01:00.0
                 Display Server: X.Org 1.19.2 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
                 Resolution: 1920x1200@59.95hz
                 OpenGL: renderer: Gallium 0.4 on NV94 version: 3.3 Mesa 13.0.6 Direct Render: Yes
      Audio:     Card Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
                 Sound: Advanced Linux Sound Architecture v: k4.10.5-antix.3-amd64-smp
      Network:   Card: Intel 82567LM Gigabit Network Connection driver: e1000e v: 3.2.6-k port: 80e0 bus-ID: 00:19.0
                 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
      Drives:    HDD Total Size: 250.1GB (9.7% used)
                 ID-1: /dev/sda model: Hitachi_HTS72322 size: 250.1GB
      Partition: ID-1: / size: 20G used: 5.4G (29%) fs: ext4 dev: /dev/sda5
                 ID-2: /home size: 18G used: 14G (84%) fs: ext3 dev: /dev/sda8
                 ID-3: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap dev: /dev/sda9
      Sensors:   System Temperatures: cpu: 41.0C mobo: 30.0C gpu: 40.0
                 Fan Speeds (in rpm): cpu: N/A
      Info:      Processes: 175 Uptime: 2:41 Memory: 870.8/3918.9MB Init: SysVinit runlevel: 5 Gcc sys: 6.3.0
                 Client: Shell (bash 4.4.121) inxi: 2.3.43 
      $ inxi -r
      Repos:     Active apt sources in file: /etc/apt/sources.list.d/antix.list
                 deb http://repo.antixlinux.com/stretch/ stretch nosystemd main
                 deb http://repo.antixlinux.com/testing/ testing main nosystemd
                 deb http://repo.antixlinux.com/sid/ sid nosystemd main
                 Active apt sources in file: /etc/apt/sources.list.d/debian.list
                 deb http://ftp.de.debian.org/debian/ stretch non-free contrib main
                 deb http://security.debian.org/ stretch/updates non-free contrib main
                 Active apt sources in file: /etc/apt/sources.list.d/palemoon.list
                 deb http://kovacsoltvideo.hu/moonchildproductions/ ./
                 Active apt sources in file: /etc/apt/sources.list.d/various.list
                 deb http://deb.opera.com/opera/ stable non-free
      • This topic was modified 6 years, 6 months ago by tlaloc77. Reason: Trying to find the reason for the error and maybe a workaround (and correcting typos) was the reason for 23 edits
      • This topic was modified 6 years, 6 months ago by tlaloc77.
      • This topic was modified 6 years, 6 months ago by tlaloc77. Reason: added results of inxi -Fxz and inxi -r (2 edits)

      My former(!) inxi -zv7, inxi -Fxs and inxi -r are here: https://www.antixforum.com/forums/topic/a-proper-hellp/#post-2981

      #3037
      Forum Admin
      rokytnji

        Howdy.

        Sometimes I drive a crooked road to get my mind straight.
        I don't suffer from insanity. I enjoy every minute off it.
        Motorcycle racing is rocket science.

        Linux Registered User # 475019
        How to Search for AntiX solutions to your problems

        #3374
        Moderator
        Brian Masinick

          Greetings tlaloc77; thank you for sharing your system information, and thanks for your persistence in posting the details! 🙂

          --
          Brian Masinick

          #3383
          Anonymous

            No idea why “data” followed by a colon is considered unsafe.

            To understand “what” lookit:
            mozwiki
            wikipedia

            To understand “why”, websearch “data-url vulnerability”

            Inserting a blank between “data” and the colon does not help.

            FWIW, can workaround by drafting a post in text editor, and search/replace (e.g., apply b…/b markup tags to each colon, or findall/replace with semicolon character)
            data:
            data;

            #3392
            Member
            tlaloc77

              Thanks for the welcome 🙂

              And a special Thank You Very Much for helping to understand the data-followed-by-a-colon debacle, I didn’t know that. Incredible…

              My former(!) inxi -zv7, inxi -Fxs and inxi -r are here: https://www.antixforum.com/forums/topic/a-proper-hellp/#post-2981

              #3454
              Anonymous

                Welcome & Howdy from Cajun Country down in the bayous of Louisiana.

              Viewing 6 posts - 1 through 6 (of 6 total)
              • You must be logged in to reply to this topic.