A small detail with Connman

Forum › Forums › Official Releases › antiX-21/22 “Grup Yorum” › A small detail with Connman

  • This topic has 2 replies, 3 voices, and was last updated Jan 25-6:19 am by Anonymous.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 24, 2022 at 5:41 am #75950
    Member
    ctcx

      If booting AntiX live with default language en_US, cmst automatically pops out *and* shortly after switches from “Status” to “Wireless” tab automatically as well, in order to select network for connection. However if booting AntiX with other language, cmst still pops out, but doesn’t switch tabs automatically.
      Is this expected?

      Thanks again.

      January 24, 2022 at 6:08 pm #75991
      Member
      olsztyn
        Helpful
        Up
        0
        ::

        @ ctcx:
        Once we are at minor peculiarities, I just want to add another one with CMST:
        Upon selecting WiFi and password has been entered it appears (in my case at least) to require the ‘OK’ button to be pressed in order to connect. It appears just hitting ‘Enter’ does not seem to work. Not important but unexpected.
        Is this just me or by design?

        Live antiX Boot Options (Previously posted by Xecure):
        https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_Parameters

        January 25, 2022 at 6:19 am #76035
        Anonymous
          Helpful
          Up
          0
          ::

          Is this expected?

          Is this just me or by design?

          For a definitive answer, here’s where you might open an issue ticket to ask: github.com/andrew-bibb/cmst/issues

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.