antiX-19-b2-full (64 and 32 bit) available

[Anonymous]

Helpful

Up

0

::

Hmmm … Don’t you think that it looked better “as intended”?

[Moderator BobC]

Helpful

Up

0

::

On my Dell D620 laptop with the Broadcom 4311, WiFi came up ok under 19b1-x64 but I don’t see any routers under 19b2-x64. Here is the inxi -Fxz from 19b1-x64

$ inxi -Fxz
System:    Host: d620 Kernel: 4.9.170-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 8.3.0 
           Desktop: IceWM 1.5.5+git20190610 Distro: antiX-19.a2_x64-full Marielle Franco 6 May 2019 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Portable System: Dell product: Latitude D620 v: N/A serial: <filter> 
           Mobo: Dell model: 0FT292 serial: <filter> BIOS: Dell v: A08 date: 04/03/2007 
Battery:   ID-1: BAT0 charge: 56.6 Wh condition: 42.8/56.6 Wh (76%) model: Panasonic DELL J825J8 status: Full 
CPU:       Topology: Dual Core model: Intel Core2 T5500 bits: 64 type: MCP arch: Core Merom rev: 2 L2 cache: 2048 KiB 
           flags: lm nx pae sse sse2 sse3 ssse3 vmx bogomips: 6657 
           Speed: 1000 MHz min/max: 1000/1667 MHz Core speeds (MHz): 1: 1000 2: 1667 
Graphics:  Device-1: Intel Mobile 945GM/GMS 943/940GML Express Integrated Graphics vendor: Dell driver: i915 v: kernel 
           bus ID: 00:02.0 
           Display: x11 server: X.Org 1.20.4 driver: intel resolution: 1440x900~60Hz 
           OpenGL: renderer: Mesa DRI Intel 945GM v: 1.4 Mesa 18.3.6 direct render: Yes 
Audio:     Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
           Sound Server: ALSA v: k4.9.170-antix.1-amd64-smp 
Network:   Device-1: Broadcom Limited NetXtreme BCM5752 Gigabit Ethernet PCI Express vendor: Dell Latitude D620 driver: tg3 
           v: 3.137 port: 10c0 bus ID: 09:00.0 
           IF: eth0 state: down mac: <filter> 
           Device-2: Broadcom Limited BCM4311 802.11a/b/g vendor: Dell Wireless 1490 Dual Band WLAN Mini-Card 
           driver: b43-pci-bridge v: N/A port: 10c0 bus ID: 0c:00.0 
           IF-ID-1: wlan0 state: up mac: <filter> 
Drives:    Local Storage: total: 149.05 GiB used: 3.76 GiB (2.5%) 
           ID-1: /dev/sda vendor: Samsung model: HM160HI size: 149.05 GiB 
Partition: ID-1: / size: 14.70 GiB used: 3.76 GiB (25.5%) fs: ext4 dev: /dev/sda7 
           ID-2: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 60.0 C mobo: N/A sodimm: 54.0 C 
           Fan Speeds (RPM): cpu: 0 
Info:      Processes: 137 Uptime: 1m Memory: 1.95 GiB used: 164.0 MiB (8.2%) Init: SysVinit runlevel: 5 Compilers: gcc: 8.3.0 
           Shell: bash v: 5.0.3 inxi: 3.0.33 
bobc@d620:~
$ sudo lsmod | grep "b43"
[sudo] password for bobc: 
b43                   381663  0
bcma                   36639  1 b43
mac80211              470681  1 b43
cfg80211              240933  2 b43,mac80211
rng_core                6124  1 b43
ssb                    51880  2 b43,ssb_hcd
mmc_core               98254  2 b43,ssb
bobc@d620:~
$

• This reply was modified 3 years, 10 months ago by rokytnji.

[Member PPC]

Helpful

Up

0

::

@skidoo- I like surf and I usually always have it in my system, but installing it does not imply only a very small donwload on antiX 19b2:

sudo apt install surf
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  libgstreamer-gl1.0-0 libjavascriptcoregtk-4.0-18 libwebkit2gtk-4.0-37
Suggested packages:
  libwebkit2gtk-4.0-37-gtk2 apparmor
Recommended packages:
  gstreamer1.0-gl
The following NEW packages will be installed:
  libgstreamer-gl1.0-0 libjavascriptcoregtk-4.0-18 libwebkit2gtk-4.0-37 surf
0 upgraded, 4 newly installed, 0 to remove and 14 not upgraded.
Need to get 17.9 MB of archives.
After this operation, 70.3 MB of additional disk space will be used.
Do you want to continue? [Y/n] y

– Possible bug: when testing antiX19b2 live from usb on a netbook with 1024X600 display, IceWM BlueDay theme did not display file manager and web browser toolbar icons (but displayed the USB eject button fine).
Switching to JWM I noticed both icons displayed fine there. If I forced IceWM BlueDay theme to use the same default icons for FM and Web Broser from JWM, they showed up fine. I did not test this an further…
– Possible bug: once, and only once (among almost 10 times), while powering off from live iso from usb, I got the old style many lines of text, instead of the usual “Press Alt f1 for…” Strange…
– Possible bug: I noticed that the mouse pointer looks different, for example, when hovering on a weblink it turns into a little white hand pointing left. I went to CC and selected Adwaita, restarted the session and realized there was no change to my pointer. Selecting other mouse pointer and restarting session worked. So I realized: the default Adwaita pointer and the preview from the control centre do not match (the preview shows the mouse pointers I’m used to, from previous antiX versions, not the “new” pointers)
– Possible bug: I tried using a windows driver for my wi-fi card. In the “Wireless Network drivers” window, if the user clicks the “configure network” button, antiX complains that it cant find it a network configuration tool…
– Out of date links: using JWM- menu-help-jwm-homepage does not open anything. The correct link is http://joewing.net/projects/jwm/
Also the Archwiki JWM link does not open in Dillo, but open on Firefox. The same thing happens with the provided on the menu for https:/help.ubuntu.com/community/Gufw link.
The link http:/www.partimage.org/Partimage-manual_Usage does not open in Dillo. It opend in Firefox and pointd to the current link http://www.partimage.org/manual/Basic-usage/, that link works fine in Dillo.
The Rox manual currently is on http://rox.sourceforge.net/Manual/Manual/Manual.html (that link opens fine in Dillo)
– Not a bug, but a strange happy RAM usage difference (using live 64bits): on my desktop with 3 gig of ram I get antiX19 to run in about 120Mb (minimal desktop, live via ISO from HD), on USB live on a netbook with 1 Gig of shared RAM, “free -h” showed I was running in some 98MB of RAM on idle (Min-IceWM with BlueDay theme)!!! WOW! A full featured, “cutting edge” OS, very nice looking in less than 100Mb! I wonder if the difference comes from some start preferences, or maybe the video driver (netbook is Intel, desktop has a NVIDIA card- if that matters)?
– No longer buggy: I’m happy to report that SMtube now works out of the box, faster than ever (some 2-3 seconds to start playing a 360 or 480 dpi video stream, even on my crappy old netbook).

EDIT: found a minor visual bug: if using the Lines wallpaper, if the user logs off, the blurred log-in screen shows not only the lines but also the word “antiX”,on the top right of the lines…

Note: as per anticapitalista’s request, I’m not commenting any further, on this thread, about the “visual aspect” of antix19b2, or no longer, out of the blue, offer to fix anything related to that. Fortunately now antiX comes, out of the box, with everything I want to make it look perfect for me, I don’t even need to install anything else, just change some defaults. At least from my part, I only offered constructive suggestions to improve even more this great OS and help “fix” some very minor details in the very small way my limited know-how allows me to… I believe we should all do as anti asked, and stop publishing stuff about the beta’s “visual aspect” here and worry about possible real bugs.

P.

• This reply was modified 3 years, 9 months ago by PPC.

[Anonymous]

Helpful

Up

0

::

@PPC

Hardly “a bug”, except if I’m creating the bugs. 😉

If you take a look at my “as intended” post above, you’ll clearly
notice that it’s exactly the same (except for blurred) as the:

[Member Xecure]

Helpful

Up

0

::

BobC wrote:

On my Dell D620 laptop with the Broadcom 4311, WiFi came up ok under 19b1-x64 but I don’t see any routers under 19b2-x64. Here is the inxi -Fxz from 19b1-x64

I had the same problem with Beta 1 and have it again with beta 2, but not really a problem for me. What worked for me was restarting the networking service. I only had to do it once, on that session (restarting also works), and the wifi could detect the routers again.

sudo service networking restart

Probably someone will correct me and say I must not do that and instead do ifdown and ifup. Sorry for that.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

[Member orcrist]

Helpful

Up

0

::

I am trying to install some language meta-packages for LibreOffice via the Package Installer. The sources seem to get apt-get updated, the Terminal appears and crashes in a second and the message “Do you want to exit Package Installer” appears as if the installation is finished without actually anything being installed.

[Member Xecure]

Helpful

Up

0

::

Hi, orcrist

orcrist wrote:

I am trying to install some language meta-packages for LibreOffice via the Package Installer.

Try to find the package with Synaptic (Control Center > System > Package Manager).

Does someone know where the logs for the Package Installer are located? It may be interesting to see what error orcrist found.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

[Forum Admin anticapitalista]

Helpful

Up

0

::

orcrist wrote:

I am trying to install some language meta-packages for LibreOffice via the Package Installer. The sources seem to get apt-get updated, the Terminal appears and crashes in a second and the message “Do you want to exit Package Installer” appears as if the installation is finished without actually anything being installed.

Can you give an example to see if I can replicate it (and hopefully fix it)? Thanks

Philosophers have interpreted the world in many ways; the point is to change it.

antiX with runit - leaner and meaner.

[Member Xecure]

Helpful

Up

0

::

anticapitalista wrote:

Can you give an example to see if I can replicate it (and hopefully fix it)? Thanks

orcrist, please do as anticapitalista says. If possible also do the installation a gain but this time execute the package installer from terminal:
sudo packageinstaller
Install the libreoffice language pack again, and when it ends, paste here all the output in the terminal. this may help find out the problem.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

[Member orcrist]

Helpful

Up

0

::

Trying out Greek_LO_main:

pan@DellMini10v:~
$ sudo packageinstaller 
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
running cmd: "arch"
running cmd: "cat /etc/debian_version | cut -f1 -d'.'"
running cmd: "dpkg -l packageinstaller| awk 'NR==6 {print $3}'"
running cmd: "dpkg --get-selections | grep -v deinstall | cut -f1"
running cmd: "apt-get update"
running cmd: "x-terminal-emulator -T 'Installing packages...' -e apt-get install --reinstall libreoffice-calc libreoffice-draw libreoffice-impress libreoffice-math libreoffice-writer libreoffice-l10n-el libreoffice-help-el libreoffice-gtk "
running cmd: "\n"
running cmd: "dpkg --get-selections | grep -v deinstall | cut -f1"
could not remove listapps file
tree cleared
cleanup code
terminate cmd called
terminating parent process: 5331
kill cmd called
killing parent process: 5331
removing lock
QProcess: Destroyed while process ("/bin/bash") is still running.
pan@DellMini10v:~

German_LO_main:

$ sudo packageinstaller 
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
running cmd: "arch"
running cmd: "cat /etc/debian_version | cut -f1 -d'.'"
running cmd: "dpkg -l packageinstaller| awk 'NR==6 {print $3}'"
running cmd: "dpkg --get-selections | grep -v deinstall | cut -f1"
running cmd: "apt-get update"
running cmd: "x-terminal-emulator -T 'Installing packages...' -e apt-get install --reinstall libreoffice-calc libreoffice-draw libreoffice-impress libreoffice-math libreoffice-writer libreoffice-l10n-de libreoffice-help-de libreoffice-gtk "
running cmd: "\n"
running cmd: "dpkg --get-selections | grep -v deinstall | cut -f1"
could not remove listapps file
tree cleared
cleanup code
terminate cmd called
terminating parent process: 6699
kill cmd called
killing parent process: 6699
removing lock
QProcess: Destroyed while process ("/bin/bash") is still running.
pan@DellMini10v:~

Have tried in an installed 32-bit system as well as in a 64-bit live system, both with the latest dist-upgrades. In both betas.

Hope it helps.

[Forum Admin anticapitalista]

Helpful

Up

0

::

Thanks – found the problem – fix should show up in repos asap

Philosophers have interpreted the world in many ways; the point is to change it.

antiX with runit - leaner and meaner.

[Moderator BobC]

Helpful

Up

0

::

On fresh reboots of the Dell D620 with BRCM 4311 to flashdrive:

I tried ifdown (it didn’t know what wlan0 was)

I tried sudo service networking restart

I also tried modprobe -r b43 then modprobe b43 and that didn’t help

I also tried turning the wifi switch off then on

I ran inxi, lsmod and lspci to text files and zipped the output and attached them here. Can’t do much further with that machine.

PS: I noticed a difference on lsmod where mmc_block wasn’t there on 19b1 but appears on 19b2

PSS: Once I installed to the hard drive, Connman worked normally and is now working fine

• This reply was modified 3 years, 9 months ago by BobC.
• This reply was modified 3 years, 9 months ago by BobC.

Attachments:

1. d620-19b2.zip

[Member entropyfoe]

Helpful

Up

0

::

Xecure,

No joy with the newer kernel. (4.19.0-5-amd64)

Still no sound. Behavior is the same reacting in the control panel and when running the sound test commands from terminal.

The AlsaMixer shows (correctly I believe) Card: HD-Audio generic
and Chip: Realtek ALC1220 (Also correct)

The little speaker on the panel is up, the mixer channels are all up, with numbers, not muted.

inxi is below, showing the beta2, the motherboard, and Audio, besides the hdmi, the Device-2 AMD Family 17h HD Audio. This name seems a bit too much to me, like over specified.

Remember the on-board sound works out of the box in MX 18, and antix 17, and 16 as I recall. No configuration, except maybe 16, where the sound card selector produced a working sound for the first time on this board in linux fore me two years ago! So a totally new kernel, same problem, something is different, and this “AMD Family 17h HD Audio” does not look right.

I$ inxi -F
System:
  Host: Ryzen Kernel: 4.19.0-5-amd64 x86_64 bits: 64 
  Desktop: IceWM 1.5.5+git20190610 
  Distro: antiX-19.b2_x64-full Marielle Franco 13 July 2019 
Machine:
  Type: Desktop Mobo: ASUSTeK model: PRIME X370-PRO v: Rev X.0x 
  serial: <root required> UEFI [Legacy]: American Megatrends v: 4024 
  date: 09/07/2018 
CPU:
  Topology: 6-Core model: AMD Ryzen 5 1600X bits: 64 type: MT MCP 
  L2 cache: 3072 KiB 
  Speed: 2112 MHz min/max: 2200/3600 MHz Core speeds (MHz): 1: 2104 2: 1955 
  3: 1882 4: 1887 5: 1883 6: 1885 7: 1883 8: 1883 9: 1989 10: 1876 11: 1915 
  12: 1884 
Graphics:
  Device-1: NVIDIA GK208 [GeForce GT 710B] driver: nouveau v: kernel 
  Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa 
  resolution: 1920x1080~60Hz 
  OpenGL: renderer: NV106 v: 4.3 Mesa 18.3.6 
Audio:
  Device-1: NVIDIA GK208 HDMI/DP Audio driver: snd_hda_intel 
  Device-2: AMD Family 17h HD Audio driver: snd_hda_intel 
  Sound Server: ALSA v: k4.19.0-5-amd64 
Network:
  Device-1: Intel I211 Gigabit Network driver: igb 
  IF: eth0 state: up speed: 100 Mbps duplex 
Drives:
  Local Storage: total: 1.14 TiB used: 478.81 GiB (41.1%) 
  ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 960 EVO 250GB 
  size: 232.89 GiB 
  ID-2: /dev/sda vendor: Samsung model: SSD 850 EVO 1TB size: 931.51 GiB 
Partition:
  ID-1: / size: 100.88 GiB used: 4.24 GiB (4.2%) fs: ext4 
  dev: /dev/nvme0n1p4 
  ID-2: swap-1 size: 16.60 GiB used: 0 KiB (0.0%) fs: swap 
  dev: /dev/nvme0n1p2 
Sensors:
  System Temperatures: cpu: 33.4 C mobo: N/A gpu: nouveau temp: 44 C 
  Fan Speeds (RPM): cpu: 0 
Info:
  Processes: 207 Uptime: 16m Memory: 15.66 GiB used: 775.0 MiB (4.8%) 

• This reply was modified 3 years, 9 months ago by entropyfoe.

Asus Prime 370X-Pro
AMD Ryzen 1600X (6 cores @ 3.6 GHz)
16 Gig DDR4 3200 (G Skill)
Nvidia -MSI GeForce GT 710 fanless
Samsung 960 NVMe SSD nvme0n1 P1,P2, and P3=MX-18, P4=antiX-19 beta
2TB WD sda1= data
on-board ethernet &and sound

[Member Xecure]

Helpful

Up

0

::

entropyfoe wrote:

Still no sound.

There must be something wrong with the driver then.

Please, try again to search the dmesg output.
dmesg | grep "audio"

Play again any sound and check the end of dmesg for errors
dmesg | tail

entropyfoe wrote:

Remember the on-board sound works out of the box in MX 18, and antix 17, and 16 as I recall. No configuration, except maybe 16, where the sound card selector produced a working sound for the first time on this board in linux fore me two years ago! So a totally new kernel, same problem, something is different, and this “AMD Family 17h HD Audio” does not look right.

That is why it is important that we find the origin of the issue. Or else you could also find yourself with the same problem with MX 19.

For the future (not related):

entropyfoe wrote:

No joy with the newer kernel. (4.19.0-5-amd64)

You probably know this, but just in case I will write it down.
I don’t know how MX works, but here you have to manually install the new kernels. The newest kernel will be super-easily found in antiX Package Installer (under Kernels). Always choose it from there, so that all the vulnerability fixes can be downloaded from there.
Or search through synaptic. Search for “linux-image-4.19” and “linux-image-4.19” and install the latest with security patches (right now, 4.19.52)
Or from terminal
sudo cli-aptiX
Search for antiX kernels > View leading results > choose which to install.
Off topic: I really enjoy the cli-aptiX, as it makes it super easy to choose any antiX kernel without having to navigate any menus.

• This reply was modified 3 years, 9 months ago by Xecure. Reason: fixing some wording
• This reply was modified 3 years, 9 months ago by Xecure.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

[Member entropyfoe]

Helpful

Up

0

::

Thanks Xecure,

Can you give some more detailed instruction on how to execute the command you showed.

dmesg | grep “audio”

Play again any sound and check the end of dmesg for errors
dmesg | tail

I am doing something wrong. Do I navigate to the var/logs directory and run those commands in the terminal?

Because I get nothing, or the “command not found” error.

Asus Prime 370X-Pro
AMD Ryzen 1600X (6 cores @ 3.6 GHz)
16 Gig DDR4 3200 (G Skill)
Nvidia -MSI GeForce GT 710 fanless
Samsung 960 NVMe SSD nvme0n1 P1,P2, and P3=MX-18, P4=antiX-19 beta
2TB WD sda1= data
on-board ethernet &and sound

[Author]

Posts