antiX-19-b3-full and base versions (64 and 32 bit) available

Forum Forums News Announcements antiX-19-b3-full and base versions (64 and 32 bit) available

  • This topic has 184 replies, 30 voices, and was last updated Oct 18-11:00 am by anticapitalista.
Viewing 15 posts - 46 through 60 (of 185 total)
  • Author
    Posts
  • #26069
    Member
    Avatarolsztyn

    @olsztyn, have you possibly just missed to update the system before the installation of google-chrome ?
    No problem here by installing the browser with the package-installer.

    Yes, I have indeed… Thank you caprea!
    Install worked after update…
    Best Regards…

    #26112
    Member
    Avatarrej

    Hi anticapitalista-

    Thank you for such nice work on this – very impressive, although it always has been.

    Do the file names/wallpaper names have spaces?

    How are you setting your custom wallpaper? Which app?

    Removing the spaces was what worked in both Home/Pictures and usr/share/wallpaper. I will just remember to rename with no spaces in antiX 19.

    Always use C.C. – “Choose Wallpaper” – was not aware there was any other way for IceWM and Fluxbox.

    1. Seems like the issue is with your imported files. Can you check the format?

    The files are almost all Leafpad originated text files with a few that are Featherpad. They never save with extensions in the name.

    Yes – all imported files.

    Attachments are examples from B3 and MX.

    • This reply was modified 1 year, 1 month ago by rej.
    #26122
    Member
    Avatarrej

    BobC-

    Thanks!

    I always format and after the install then copy in my own files.

    Same here – Gparted – Swap file partition and root partition – select partitions on install and copy files to Home/documents after install.

    Xfce runs flawlessly [except cannot select wallpaper in the usual manner in Thunar – that is not normal for antiX]. Thunar displays and opens the text files up as “read and write only”.

    On antiX 19 installations with only IceWM, and the files are executable.

    Same setup for years. MX and antiX.

    Please tell me how to use quotes with a specific individual such as “BobC wrote” in title?

    #26125
    Member
    AvatarBobC

    rej,

    Noclue created a thread for you…

    OT: Sometimes …

    On the header above the post on the right look for the “QUOTE” link…

    We should limit the discussion in this thread to issues with 19b3 that the devs need to look at (or explain how to work it) if possible. That way they can focus on getting the beta completed and getting a good release out.

    #26126
    Forum Admin
    anticapitalistaanticapitalista

    antiX-19-b3-full 64-bit

    1. Changing Grub background doesn’t work.
    Neither from the Control Centre, nor by adding it manually in /etc/default/grub (incl. update-grub).
    See screenshots 0 & 1. It doesn’t even give back the original preinstalled image, but only the default.

    Confirmed. This is due to some problem with the grub images you sent me.
    Just to see, try copying /usr/share/wallpaper/grub/auditorio_de_tenerife to /usr/share/wallpaper/back.jpg
    Then update-grub in a root terminal.
    New image does appear at grub screen.

    Philosophers have interpreted the world in many ways; the point is to change it.

    antiX with runit - leaner and meaner.

    #26132
    Member
    Avatarmodel99

    The problem with ICMP in the TCP/IP stack still exists in:

    $ uname -a
    Linux antix1 4.9.189-antix.1-amd64-smp #1 SMP PREEMPT Thu Aug 15 01:53:58 BST 2019 x86_64 GNU/Linux

    Running “sudo /usr/share/ufw/check-requirements” shows the same failures
    as in Beta 2.

    What this means is ICMP is broken in both IPv4 and IPv6.

    The effect is not limited to the UFW firewall enabling failure.
    If you check the status of UFW after it is enabled, it will show that
    it is active. My testing shows that it will not be automatically
    re-enabled after the computer is rebooted.

    The other effects of having a broken ICMP based on the results from
    running /usr/share/ufw/check-requirements are:

    In IPv4, is unable to handle:

    destination-unreachable
    source-quench
    time-exceeded
    parameter-problem
    echo-request (ping)

    In IPv6, is unable to handle:

    destination-unreachable
    packet-too-big
    time-exceeded
    parameter-problem
    echo-request (ping)
    with hl neighbor-solicitation
    with hl neighbor-advertisement
    with hl router-solicitation
    with hl router-advertisement

    #26133
    Forum Admin
    anticapitalistaanticapitalista

    The problem with ICMP in the TCP/IP stack still exists in:

    $ uname -a
    Linux antix1 4.9.189-antix.1-amd64-smp #1 SMP PREEMPT Thu Aug 15 01:53:58 BST 2019 x86_64 GNU/Linux

    Running “sudo /usr/share/ufw/check-requirements” shows the same failures
    as in Beta 2.

    What this means is ICMP is broken in both IPv4 and IPv6.

    The effect is not limited to the UFW firewall enabling failure.
    If you check the status of UFW after it is enabled, it will show that
    it is active. My testing shows that it will not be automatically
    re-enabled after the computer is rebooted.

    The other effects of having a broken ICMP based on the results from
    running /usr/share/ufw/check-requirements are:

    In IPv4, is unable to handle:

    destination-unreachable
    source-quench
    time-exceeded
    parameter-problem
    echo-request (ping)

    In IPv6, is unable to handle:

    destination-unreachable
    packet-too-big
    time-exceeded
    parameter-problem
    echo-request (ping)
    with hl neighbor-solicitation
    with hl neighbor-advertisement
    with hl router-solicitation
    with hl router-advertisement

    Do the later antiX kernels work as they should (4.19 and 5.2 series)?

    Philosophers have interpreted the world in many ways; the point is to change it.

    antiX with runit - leaner and meaner.

    #26134
    Member
    capreacaprea

    Do the later antiX kernels work as they should (4.19 and 5.2 series)?

    Yes, 4.19.66-antix.1 and linux-image-5.2.8-antix.1
    do pass the test without errors.

    The problem obviously only occurs with the 4.9 kernels.It’s not possible to open any webside in a browser, if ufw is enabled.
    I tested only with 64bit , though.

    #26136
    Member
    christophechristophe

    I can confirm 4.19.66-antix.1-686-smp-pae also runs ufw as expected (correctly).

    • This reply was modified 1 year, 1 month ago by christophe.
    #26137
    Forum Admin
    DaveDave

    Thank you for such nice work on this – very impressive, although it always has been.

    Do the file names/wallpaper names have spaces?

    How are you setting your custom wallpaper? Which app?

    Removing the spaces was what worked in both Home/Pictures and usr/share/wallpaper. I will just remember to rename with no spaces in antiX 19.

    Always use C.C. – “Choose Wallpaper” – was not aware there was any other way for IceWM and Fluxbox.

    The amount of times this bug returns is truly become very old…. I am so in the habit of having no spaces that I always forget to test this. Is this error with the rox- options? Space- options? plain / min- options? All of the above?

    I am hoping that it is only the rox options as that was recently modified for the mode options.

    Computers are like air conditioners. They work fine until you start opening Windows. ~Author Unknown

    #26139
    Member
    christophechristophe

    4.19.66-antix.1-486-smp also works with ufw enabled.

    #26140
    Member
    christophechristophe

    Both 5.2.8-antix.1-486-smp & 5.2.8-antix.1-686-smp-pae give me this error:

    $ sudo ufw status
    ERROR: problem running iptables: iptables v1.8.2 (nf_tables):  CHAIN_ADD failed (No such file or directory): chain INPUT
    

    (And completely blocked from internet.)

    Rolling back to 4.19.66-antix.1-486-smp got me back to normal (having to re-enable ufw, but works great).

    #26149
    AvatarAnonymous

    anticapitalista wrote:

    Confirmed. This is due to some problem with the grub images you sent me.

    “GRUB 2 can use PNG, JPG/JPEG and TGA images for the background.
    However JPG/JPEG must be 8-bit (256 color).
    And Images should be non-indexed, RGB

    It’s my mistake because of …

    I’ve seen, you wrote JPG only in Control Centre and wanted to provide you JPG’s, instead of PNG’s that I’m usually using myself.

    PNG’s are on the their way … You don’t wanna see 8-bit “Lines”, trust me. 😉

    #26282
    Member
    Avatarrej

    Main Menu – IceWM:

    The new “Preferences” option in the main menu (a very nice addition):

    Scalar & String: is that just informational or are settings supposed to be able to be changed from there?

    • This reply was modified 1 year, 1 month ago by rej.
    #26284
    Member
    AvatarBobC

    Rej, what version are you running? I don’t have that problem on 64 bit full.

Viewing 15 posts - 46 through 60 (of 185 total)
  • The topic ‘antiX-19-b3-full and base versions (64 and 32 bit) available’ is closed to new replies.