Antix 19 Conecta wifi pero no sale a internet [solved]

[Member Patxi]

Hola, soy nuevo en esto del Linux, os cuento…
He instalado Antix 19.8.1 full en dos antiguos Netbook un compaq que funciona perfectamente y un Packard Bell Dot’s en el que no consigo que funcione internet.
Con cable si, pero con wifi no lo consigo.
-El adaptador wifi, lo reconoce bien
-Conecta usando CENI a la wifi
-El ping al router o a otros equipos conectados a la misma red funciona
-En navegador de internet, no funciona, tampoco ping a url externa.

Espero vuestra ayuda,
Saludos,
Patxi

• This topic was modified 2 years, 11 months ago by anticapitalista. Reason: solved

[Forum Admin anticapitalista]

Helpful

Up

0

::

Have a read of this thread: https://www.antixforum.com/forums/topic/why-is-wlan0-blocked-dns-server-doesnt-work-in-19-2/

Philosophers have interpreted the world in many ways; the point is to change it.

antiX with runit - leaner and meaner.

[Member Xecure]

Helpful

Up

0

::

Bienvenido, Patxi.

You have to choose.

A. Use Connman
If you want to use connman, delete the wifi information created by CENI in /etc/network/interfaces
sudo geany /etc/network/interfaces
It should look like this:

#------------------------------------------------------------------------------
# /etc/network/interfaces
#
# interfaces(5) file used by ifup(8) and ifdown(8)
# Used by ceni but not by connman
#------------------------------------------------------------------------------

auto lo
iface lo inet loopback

Then try to connect using Connman

B. Use ceni.
You have to remove Connman completely and create a link for resolv.conf
See anticapitalista’s answer:

anticapitalista wrote:

1. Remove connman and cmst

sudo apt-get remove --purge connman cmst connman-bluetooth-firmware-antix

2. Delete the resolv.conf sym link in /etc/
3. Create a new symlink in etc like this (in a terminal)

sudo ln -s /etc/resolvconf/run/resolv.conf /etc/resolv.conf

4. Try ceni again

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

[Member Patxi]

Helpful

Up

0

::

Hello Xecure,
I’ve try using Connman, but don’t work
/etc/network/interfaces looks like in your message, but Connman don’t scan any wifi.

With the second option, I remove connman, create the symlink and using ceni it works !!!
Now connect to wifi and navigates!!!

Thanks and regards.

[Member ema345]

Helpful

Up

0

::

Hice lo anterior y me funciono correctamente.
asi tengo activo #state up# solo wifi wlan0

Network:
Device-1: Qualcomm Atheros AR9285 Wireless Network Adapter driver: ath9k
IF: wlan0 state: up mac: b4:82:fe:2b:d6:6b
Device-2: Marvell 88E8040 PCI-E Fast Ethernet driver: sky2
IF: eth0 state: down mac: 00:24:54:5e:ea:2b

se puede tener Wifi activo y ethernet tambien(por cable y solo para conectar internet, nada de redes cableadas para otras pcs, etc), las dos opciones con “state up”? Sin tener que instalar o desinstalar programas segun la necesidad del momento sino tenerlo instalado y cuando se necesita se activa con un simple comando y listo?

[Author]

Posts