antiX-22 nvidia 340xx driver

[Member user_x]

Excuse me for my English knowing 🙂 i don’t quit trust a googols
…
At this time I’m use antiX22_x64_base.
VCard is Nvidia GeForce GT 210
Monitor is 920×1080 enough it’s uncomfortable 1440×900

Install from AntiX-CC said Uh oh.))
… like this

root@zz:~# nvidia-detect-mx
Latest =  460.73.01
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2)

Checking card:  NVIDIA Corporation GT218 [GeForce 210] (rev a2)
Uh oh. Your card is not supported by any driver version up to 460.73.01.
A newer driver may add support for your card.
Newer driver releases may be available in the MX testing repository or jessie-backports.

Then I did that.

root@zz:~# apt install nvidia-detect
...
root@zz:~# nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2)

Checking card:  NVIDIA Corporation GT218 [GeForce 210] (rev a2)
Your card is only supported by the 340 legacy drivers series, which is only available up to buster.
<code>and</code>
root@zz:~# apt install nvidia-legacy-340xx-driver
...
Рекомендуемые пакеты:
  nvidia-settings-legacy-340xx nvidia-persistenced
  nvidia-legacy-340xx-driver-libs-i386 libgles1-nvidia-legacy-340xx
  libgles2-nvidia-legacy-340xx libnvidia-legacy-340xx-cfg1
Следующие НОВЫЕ пакеты будут установлены:
  glx-alternative-nvidia glx-diversions libegl1-nvidia-legacy-340xx
  libgl1-nvidia-legacy-340xx-glx libnvidia-legacy-340xx-ml1
  nvidia-installer-cleanup nvidia-kernel-common
  nvidia-legacy-340xx-alternative nvidia-legacy-340xx-driver
  nvidia-legacy-340xx-driver-bin nvidia-legacy-340xx-driver-libs
  nvidia-legacy-340xx-kernel-dkms nvidia-legacy-340xx-kernel-support
  nvidia-legacy-340xx-vdpau-driver nvidia-modprobe nvidia-support
  xserver-xorg-video-nvidia-legacy-340xx
...
Done.
...

But nvidia-settings is gone

root@zz:~# LANG=en_US.UTF-8 apt install nvidia-settings-legacy-340xx
....
Package nvidia-settings-legacy-340xx is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'nvidia-settings-legacy-340xx' has no installation candidate
root@zz:~# apt list nvidia-settings*
...
nvidia-settings-legacy-390xx/stable 390.144-1 amd64
nvidia-settings-legacy-390xx/stable 390.144-1 i386
nvidia-settings-tesla-418/stable 418.113-6 amd64
nvidia-settings-tesla-450/stable 450.119.03-1 amd64
nvidia-settings-tesla-460/stable 460.91.03-1 amd64
nvidia-settings-tesla-470/stable 470.141.03-1~deb11u1 amd64
nvidia-settings/stable 470.141.03-1~deb11u1 amd64

Exist the nvidia-xconfig

root@zz:~# apt install nvidia-xconfig libnvidia-legacy-340xx-cfg1
...
root@zz:~# nvidia-xconfig -o test.conf
WARNING: Unable to locate/open X configuration file.
New X configuration file written to 'test.conf'

But xorg.conf looks like empty and with this cfg1 and flags like –nvidia-xinerama-info
And, as I might, –mode=1440×900 or –mode-list=”1920×1080 1440×900 1368×768 1280×800 1280×720″
is not quite suitable.

i put it together with part of output of Xorg :1 -configure… with some testing with the Section”Screen”
and write to /etc/X11/xorg.conf such content

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "built-ins"
EndSection

Section "Module"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    Option         "DPMS"
EndSection
 ### all before from # Xorg :1 -configure

Section "Device"
 ### commented from # Xorg :1 -configure
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional

        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "WrappedFB"          	# [<bool>]
        #Option     "GLXVBlank"          	# [<bool>]
        #Option     "ZaphodHeads"        	# <str>
        #Option     "PageFlip"           	# [<bool>]
        #Option     "SwapLimit"          	# <i>
        #Option     "AsyncUTSDFS"        	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# <i>
	#Identifier  "Card0"
	#Driver      "nouveau"
	#BusID       "PCI:1:0:0"

    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AllowIndirectGLXProtocol" "off"
    Option         "TripleBuffer" "on"
    Option         "Stereo" "0"
    Option         "metamodes" "1440x900_59.89 +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "MetaModes" "1440x900 +0+0"
    SubSection     "Display"
        Depth       24
        Modes      "1920x1080" "1440x900" "1368x768" "1280x800" "1280x720"
    EndSubSection
EndSection

After rebooting font & locale in the Ctrl+Alt+F2 Teminal got better …
Some warnings while booting not seem to does affect the work

root@zz:~# grep nvidia /var/log/dmesg
[    2.500926] udevd[175]: Error running install command 'modprobe -i nvidia-legacy-340xx ' for module nvidia: retcode 1
[   10.204520] nvidia: loading out-of-tree module taints kernel.
[   10.204539] nvidia: module license 'NVIDIA' taints kernel.
[   10.233459] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0

but now there are fewer modes where

root@zz:~# xrandr -q
Screen 0: minimum 8 x 8, current 1440 x 900, maximum 8192 x 8192
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
VGA-0 connected 1440x900+0+0 (normal left inverted right x axis y axis) 480mm x 270mm
   1920x1080     60.00 +
   1680x1050     59.95  
   1600x1200     60.00  
   1440x900      59.89* 
   1400x1050     59.98  
   1280x1024     75.02    60.02  
   1280x960      60.00  
   1152x864      75.00  
   1024x768      75.03    70.07    60.00  
   800x600       75.00    72.19    60.32    56.25  
   640x480       75.00    72.81    59.94  
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)

it is not 1280×800 or 1368×768.
… 1440×900 is good for me, but and it is not runs as default mode.

Before I didn’t know what to do with the excess
Now I wouldn’t be so upset…

Does anyone have a working file made in the normal way?)
I would like to see … preferably with a screen resolution changed by default

• This topic was modified 6 months, 2 weeks ago by user_x.

[Member user_x]

Helpful

Up

0

::

started from scratch (:

I remove /etc/X11/xorg.conf
And add file /etc/X11/xorg.conf.d/driver-nvidia.conf

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

for now continue to use arandr
Terminal by Ctrl+Alt+F2 became normal too)
I don’t understand anymore, is there a difference between the changes, whether the resolution is changed immediately or after

It’s taking too long times … over time it slowly overgrows by itself 🙂

• This reply was modified 6 months, 2 weeks ago by user_x.

[Member ModdIt]

Helpful

Up

0

::

Hi user_x,
we all do our best to help but please note that not many persons here on forum will use the
340 legacy drivers. If anyone still does.

NVIDIA support comes from upstream Debian so you may find more help on their forum, or even on ubuntu
forums. buntu is based on debian sid. As far as I am aware the 340 Driver is no longer supported although
there is a version in sid. It has been abandoned by NVIDIA, same goes for supporting many other older cards.

[Member olsztyn]

Helpful

Up

0

::

user_x wrote:

Your card is only supported by the 340 legacy drivers series,

I had made a few attempts to make nVidia 340 driver work on antiX 21 (actually antiX 22 beta, on my two laptops Thinkpad T410 with nVidia chip NVS3100. I was successful after I was patient enough to follow procedure. The 340 driver worked fine on these laptops in the native screen resolution of 1440×900.
Due to running antiX Live on a variety of laptops, with or with no nVidia chips I eventually decided to not use nVidia driver for the reason that once installed, such antiX Live USB did not boot correctly on non-nVidia laptops. I had to fall back to Nouveau driver, which is slower.
If you are working on one computer with nVidia chip then you would not have such issue.
I remember we had a few members in this forum (unfortunately no longer) who were successful in running nVidia 340 also…

Live antiX Boot Options (Previously posted by Xecure):
https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_Parameters

[Member ModdIt]

Helpful

Up

0

::

Maybe I have an old config in a backup, will try and find it this evening.
I ran the 340 driver until a few months ago.
Problem is that nvidia drivers are frequently broken by changes in other
packages.

Picked up a newer passive cooled card cheaply so now on Tesla 470 driver.
I had issues with that driver getting broken due a non existing dependancy
too, it is now pinned.

On my thinkpad I put up with lesser performance and screen tearing with open
driver for the same reasons as olstyn.

[Member user_x]

Helpful

Up

0

::

Problem is multifaceted …
It’s hard for me to describe, but did you understand 🙂

I found something that must to help me.
The Messages in the /var/log/Xorg.0.log.))) … like this:

[    17.974] (WW) NVIDIA(0): No valid modes for "1440x900_59.89+0+0"; removing.
[    17.974] (WW) NVIDIA(0): 
[    17.974] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[    17.974] (WW) NVIDIA(0):     "nvidia-auto-select".

Perhaps after I changeв only one parameter in /etc/default/rcS

$ cat /etc/default/rcS | grep INIT_VERBOSE
INIT_VERBOSE=yes

The time is coming when I will still boot right away in the right resolution ))
интереснее понять что сломалось и возможности почининки.

I think also libnvidia-legacy-340xx-cfg1 somehow whith nvidia-xconfig mismatched… presumably

$ nvidia-xconfig --query-gpu-info

WARNING: error retrieving symbol nvCfgIsPrimaryDevice from libnvidia-cfg.so.1:
         /lib/x86_64-linux-gnu/libnvidia-cfg.so.1: undefined symbol:
         nvCfgIsPrimaryDevice

ERROR: Unable to query GPU information

But yes. It’s all makes gone.

• This reply was modified 6 months, 2 weeks ago by user_x.

[Member olsztyn]

Helpful

Up

0

::

user_x wrote:

интереснее понять что сломалось и возможности почининки.
I think also libnvidia-legacy-340xx-cfg1 somehow whith nvidia-xconfig mismatched… presumably

Looks to me overall that you are quite knowledgeable in technical intricacies, so if you manage to make this 340 driver work correctly you will help other users with the solution to these problems…
Good luck and regards…

Live antiX Boot Options (Previously posted by Xecure):
https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_Parameters

[Member user_x]

Helpful

Up

0

::

solution to these problems…

it not so easy.

Experiment Has been )
I go to http://www.nvidia.ru/Download/driverResults.aspx/156200/ ,
download that,

Linux x64 (AMD64/EM64T) Display Driver
Version: 340.108
Release Date: 2019.12.23
Operating System: Linux 64-bit
Language: Русский
File Size: 66.92 MB

make chmod 0754 /home/zzz/NVIDIA-Linux-x86_64-340.108.run
Switch to tty … by Ctrl+Alt+F2
and with apt make

apt purge nvidia*
apt install build-essential
service slimski stop

linux-headers-4.9.0-326-antix.1-amd64-smp already exist … may be need too

Then launched it /home/zzz/NVIDIA-Linux-x86_64-340.108.run
tried with whit DKMS is Off & 32-bit somewhat & autosetting with nvidia-xconfig.
It was done.
…. nvidia-xconfig exactly the same something can not to do.
xorg.conf was like empty.

After reboot fonts became very small
… just like in those distant times, when there was no doubt about the performance of the driver…
But The No 🙂
It’s were noveau with nvidia … at the same time together.
And again…
CODESET=Uni2 console-font-select
mc
I added /etc/modprobe.d/nvidia-blacklists-nouveau.conf

# You need to run "update-initramfs -u" after editing this file.
# see #580894
blacklist nouveau

But not added `nvidia-modprobe.conf
install nvidia modprobe -i nvidia-legacy-340xx $CMDLINE_OPTS
install nvidia-uvm modprobe nvidia ; modprobe -i nvidia-legacy-340xx-uvm $CMDLINE_OPTS
remove nvidia modprobe -r -i nvidia-uvm nvidia

# These aliases are defined in *all* nvidia modules.
# Duplicating them here sets higher precedence and ensures the selected
# module gets loaded instead of a random first match if more than one
# version is installed. See #798207.
alias pci:v000010DEd00000E00sv*sd*bc04sc80i00* nvidia
alias pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00* nvidia
alias pci:v000010DEd*sv*sd*bc03sc02i00* nvidia
alias pci:v000010DEd*sv*sd*bc03sc00i00* nvidia`
The udevd[175]: Error running install command ‘modprobe -i nvidia-legacy-340xx Not shows.

Also added /etc/X11/xorg.conf.d/nvidia-drm-outputclass.conf

# automatically load the nvidia driver when it detects a device driven by the
# nvidia.ko kernel module.  Please note that this only works on Linux kernels
# version 3.9 or higher with CONFIG_DRM enabled, and only if the nvidia.ko
# kernel module is loaded before the X server is started.

Section "Files"
    ModulePath     "/usr/lib/xorg/modules/linux"
    ModulePath     "/usr/lib/xorg/modules"
EndSection

Section "OutputClass"
    Identifier     "nvidia"
    MatchDriver    "nvidia-drm"
    Driver         "nvidia"
EndSection

And yep… 1440×900 …. with such /etc/X11/xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 340.108  (buildmeister@swio-display-x64-rhel04-01)  Wed Dec 11 15:13:33 PST 2019

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes      "1440x900"
    EndSubSection
EndSection

But still somehow not calm in my thoughts ) … something is missing

[Member user_x]

Helpful

Up

0

::

My apologies. The purity of the experiment is in question.)
Noticed the rest.
apt purge glx-alternative-mesa libnvidia-legacy-340xx-eglcore libnvidia-legacy-340xx-glcore update-glx
And I don’t remember if I did then update-initramfs -u
After rebooting, I saw something that I could not see before.

$ nvidia-xconfig  --query-gpu-info
Number of GPUs: 1

GPU #0:
  Name      : GeForce 210
  UUID      : GPU-504e4087-f432-770a-71c6-0f41f6df5f36
  PCI BusID : PCI:1:0:0

  Number of Display Devices: 1

  Display Device 0 (CRT-1):
      EDID Name             : ViewSonic VA2213w
      Minimum HorizSync     : 24.000 kHz
      Maximum HorizSync     : 82.000 kHz
      Minimum VertRefresh   : 50 Hz
      Maximum VertRefresh   : 75 Hz
      Maximum PixelClock    : 170.000 MHz
      Maximum Width         : 1920 pixels
      Maximum Height        : 1080 pixels
      Preferred Width       : 1920 pixels
      Preferred Height      : 1080 pixels
      Preferred VertRefresh : 60 Hz
      Physical Width        : 480 mm
      Physical Height       : 270 mm

It became even more incomprehensible…

But besides this, I’m interested in how critical it is that the screen does not flash when loading, after which the font becomes small.
Sometime in the near future I will try to repeat the experiment on a clean system. 🙂

[Member user_x]

Helpful

Up

0

::

apt install build-essential

FIX: Don’t needed.
Need that
apt install libc6-dev

PS: I tried x64 & x86
https://www.nvidia.com/Download/driverResults.aspx/156163/en-us/
Linux x64 (AMD64/EM64T) Display Driver
Version: 340.108
Release Date: 2019.12.23
Operating System: Linux 64-bit
Language: English (US)
File Size: 66.92 MB

https://www.nvidia.com/Download/driverResults.aspx/156162/en-us/
Linux Display Driver – x86
Version: 340.108
Release Date: 2019.12.23
Operating System: Linux 32-bit
Language: English (US)
File Size: 37.1 MB

… All the same.
.while quick dragging tearing of window edges is exist
.poority of xorg.conf
.not many of display resolutions with xrandr -q

upd:
in Xorg.0.log

[    19.237] (II) NVIDIA dlloader X Driver  340.108  Wed Dec 11 14:06:26 PST 20>
[    19.237] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    19.244] (++) using VT number 7

[    19.263] (II) Loading sub module "fb"
[    19.263] (II) LoadModule: "fb"
[    19.264] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.276] (II) Module fb: vendor="X.Org Foundation"
[    19.276]    compiled for 1.20.11, module version = 1.0.0
[    19.276]    ABI class: X.Org ANSI C Emulation, version 0.4
[    19.276] (WW) Unresolved symbol: fbGetGCPrivateKey
[    19.276] (II) Loading sub module "wfb"
[    19.276] (II) LoadModule: "wfb"
[    19.276] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    19.282] (II) Module wfb: vendor="X.Org Foundation"
[    19.282]    compiled for 1.20.11, module version = 1.0.0
[    19.282]    ABI class: X.Org ANSI C Emulation, version 0.4

In official driver exists too … presumably something about FrameBuffer

• This reply was modified 6 months, 1 week ago by user_x.

[Member user_x]

Helpful

Up

0

::

i386 experience.

First I installed nvidia-settings

$ LANG=c apt list nvidia-settings*
Listing... Done
nvidia-settings-legacy-390xx/stable,now 390.144-1 i386 [installed]

It’s uninstalls official nvidia-driver? if has installed. I have no

Then installed nvidia-legacy-340xx-driver
nvidia-settings from menu launches, but 390xx driver is missing.

Then, after several attempts, I did that
update-glx --config nvidia
and selected 340xx.
It itself added files to /etc/modprobe.d/ and /etc/modules-load.d
I think that’s all. 🙂

But, after it all, In the menu missing launcher for nvidia-settings
And it’s not in dirs in $PATH either
I run it like this
gksu /usr/lib/nvidia/legacy-390xx/nvidia-settings &
in terminals, or anyhow from menu->execute?…

it would be nice to make a symbolic link anywhere in $PATH … but i’m lazy)
And yes. In the menu exists Alternative Configurator
… I don’t know how to use it yet.)

I think all it over, like this… maximum for me))

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 390.144

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "ViewSonic VA2213w"
    HorizSync       24.0 - 82.0
    VertRefresh     50.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 210"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "CRT-1"
    Option         "metamodes" "nvidia-auto-select +0+0 {viewportin=1366x768, viewportout=1920x1079+0+0}"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

For now It maked that xorg.conf for me.
Many GUI programs doesn’t see … metamodes … arandr showes 1920×1080, but occasionally with big letters)
… appeared Error running install command ‘modprobe -i nvidia-legacy apeared
… appeared nvidia splash screen before sloimski loading

• This reply was modified 6 months, 1 week ago by user_x.

[Member user_x]

Helpful

Up

0

::

Nouveau driver, which is slower.

CPU loading is more important to me.
With noveau, I have a stable 18-20%.
And so 3-4%.
…when watching TV.)
Difficulties also appeared.
Noticed this today

$ mpv ./IpTvPlayer.m3u

Playing: http://10.1.2.34/perviy/index.m3u8
 (+) Video --vid=1 'bitrate 4160000' (h264 720x576 25.000fps)
 (+) Audio --aid=1 'bitrate 4160000' (aac 2ch 48000Hz)
free(): double free detected in tcache 2
/usr/local/bin/mpv: строка 10:  2604 Аварийный останов         /usr/bin/mpv $arg "$@"

Innstalled vls and again

$ cvlc ./IpTvPlayer.m3u
VLC media player 3.0.17.4 Vetinari (revision 3.0.13-8-g41878ff4f2)
[00fd24a0] dummy interface: using the dummy interface module...
[b450c910] adaptive demux: Changing stream format Unknown -> TS
[ac4025d0] mpeg4audio packetizer: AAC channels: 2 samplerate: 48000
free(): double free detected in tcache 2
Аварийный останов

I thought It’s The Alles. Arrived.) … Or nvidia-drivers or ffmpeg-updates
Checked with noveau and those udates on USB-Stick… works, but Sound only in vlc , after a changes of output device.
Checked in The 64-bit antiX… It works… with nvidia nvidia-driver.
After a long search,) by turning off various settings, I must have found the right button 🙂
Perhaps this

# Video output module (string)
vout=vdpau_display

in the /home/zzz/.config/vlc/vlcrc
Huh…
it remains only to understand where the button is on mpv ))
In it, with, mpv-playlistmanager, TV channels are more convenient to switch.

in other words: Nothing to complain about 🙂 tv-movie on screensot hidden

• This reply was modified 6 months ago by user_x.

Attachments:

1. 

   foollscr.jpg
   

[Member user_x]

Helpful

Up

0

::

I couldn’t get it to work with openGL. …Tried to install everything.
The solution is this.
Without anything debs.

Ctrl + Alt + F1
apt install libopengl-dev
apt install libopengl0 libc6-dev
service slimski stop

Then to launch NV..340,108.run, from those.
If noveau loaded, it adds to blacklist and need reboot.
And I try with arguments, lake this

/home/NVIDIA-Linux-x86-340.108.run --keep --target /home/build-nv -a \
 --log-file-name=/home/log-nv  --no-nvidia-modprobe --no-rpms  --no-backup \
 --disable-nouveau --run-nvidia-xconfig --dkms --install-vdpau-wrapper

But not seem any effect on it.
… rm -rf /home/build-nv
And again
reboot
nvidia-settings there not in the Menu, but exists in /usr/bin
I was a little dumb then, on that attempt )

• This reply was modified 6 months ago by user_x.

Attachments:

1. 

   scr.jpg
   

[Member ModdIt]

Helpful

Up

1

::

Hallo user_x,
dont worry about poor english, very grateful for the detailed and very interesting
thread as well as your perseverance.
Will try to follow with old laptop NVidia graphics sometime soon.

With regard to VLC, depending on your usage case, please try mpv, with a config from subluminal
the performance is vastly superior whenever I compare.
You can use search term subluminal to find the relevant forum posts.

For youtube ytfzf is very lightweight and efficient tool. Make a bash alias yt for simple starting.
It uses MPV as standard player in conjunction with ytdl, the youtube downloader.

Please do read the docs, the tool can do way more than simple looks suggests.

[Author]

Posts