antix-23.1_init-diversity-edition – sysvinit / runit / s6-rc / s6-66 + openrc

Forum Forums antiX-development antiX Respins antix-23.1_init-diversity-edition – sysvinit / runit / s6-rc / s6-66 + openrc

  • This topic has 276 replies, 17 voices, and was last updated Jun 4-11:21 am by Brian Masinick.
Viewing 15 posts - 196 through 210 (of 277 total)
  • Author
    Posts
  • #133375
    Moderator
    Brian Masinick

      I know it’s not FINAL, but in the past two builds, 66, at least on NEWER hardware, really runs well, and I’ve not been experiencing any stability issues with it. As we work and continue to improve the integrity and functionality of these images, I’m sure that “66” is not standing still either, so by the time we release antiX 24, I’m thinking that 66 could be a very good init for recent vintage systems. We still have sysVinit and runit for older systems, particularly those that are quite memory limited, and especially the 32-bit memory limited systems.

      For moderate aged systems with 64-bit architectures, and definitely for newer systems where users do not have to worry about every bit and byte used and every process cycle consumed, both s6-rc and 66 are compelling choices.

      I’m using 66 now, and I’ve gone through the others in my INSTALLED instance; as long as the software is installed and the boot loader is updated, these entries come across cleanly and work well.

      Here’s my configuration at the moment:

      pstree;sudo ps_mem.py;pinxi -v5opy71
      s6-svscan─┬─conky───4*[{conky}]
                ├─2*[dbus-daemon]
                ├─dbus-launch
                ├─devmon───udevil
                ├─pipewire-pulse───2*[{pipewire-pulse}]
                ├─pipewire-start───pipewire───2*[{pipewire}]
                ├─roxterm───bash───pstree
                ├─9*[s6-supervise───s6-log]
                ├─s6-supervise───66-shutdownd
                ├─s6-supervise───s6-fdholderd
                ├─s6-supervise───s6-ipcserverd
                ├─3*[s6-supervise───agetty]
                ├─s6-supervise───udevd
                ├─s6-supervise───dbus-daemon
                ├─s6-supervise───seatd
                ├─s6-supervise───slimski─┬─Xorg───8*[{Xorg}]
                │                        └─desktop-session───icewm-session───icewm───cmst───6*[{cmst}]
                ├─s6-supervise───connmand
                ├─s6-supervise───nmbd
                ├─s6-supervise───smbd─┬─cleanupd
                │                     └─smbd-notifyd
                ├─s6-supervise───bluetoothd
                ├─startup───volumeicon───3*[{volumeicon}]
                ├─wireplumber───4*[{wireplumber}]
                ├─wpa_supplicant
                └─zzzfm
       Private  +   Shared  =  RAM used	Program
      136.0 KiB +  23.5 KiB = 159.5 KiB	s6-ipcserverd
      144.0 KiB +  23.5 KiB = 167.5 KiB	seatd
      180.0 KiB +  25.5 KiB = 205.5 KiB	s6-svscan
      240.0 KiB +  40.5 KiB = 280.5 KiB	66-shutdownd
      348.0 KiB +  45.5 KiB = 393.5 KiB	s6-fdholderd
      260.0 KiB + 150.5 KiB = 410.5 KiB	startup
      284.0 KiB + 152.5 KiB = 436.5 KiB	pipewire-start
      388.0 KiB + 103.5 KiB = 491.5 KiB	dbus-launch
      348.0 KiB + 204.5 KiB = 552.5 KiB	udevil
      372.0 KiB + 201.5 KiB = 573.5 KiB	icewm-session
      428.0 KiB + 304.5 KiB = 732.5 KiB	agetty (3)
      632.0 KiB + 314.5 KiB = 946.5 KiB	devmon
      812.0 KiB + 297.5 KiB =   1.1 MiB	desktop-session
        1.1 MiB + 232.5 KiB =   1.3 MiB	s6-log (9)
        1.1 MiB + 541.5 KiB =   1.6 MiB	dbus-daemon (3)
      876.0 KiB + 838.0 KiB =   1.7 MiB	sudo (2)
        1.5 MiB + 741.5 KiB =   2.2 MiB	pipewire-pulse
        1.9 MiB + 369.5 KiB =   2.3 MiB	bash
        2.0 MiB + 337.5 KiB =   2.4 MiB	bluetoothd
        1.8 MiB + 775.5 KiB =   2.6 MiB	connmand
        2.1 MiB + 597.5 KiB =   2.6 MiB	udevd
        2.8 MiB + 611.5 KiB =   3.4 MiB	s6-supervise (23)
        3.2 MiB + 662.5 KiB =   3.8 MiB	conky
        3.6 MiB +   1.2 MiB =   4.8 MiB	pipewire
        2.6 MiB +   3.5 MiB =   6.1 MiB	nmbd
        3.7 MiB +   3.4 MiB =   7.1 MiB	volumeicon
        5.4 MiB +   2.1 MiB =   7.5 MiB	icewm
        7.1 MiB + 587.5 KiB =   7.7 MiB	wpa_supplicant
        8.5 MiB +   1.7 MiB =  10.2 MiB	wireplumber
        4.5 MiB +   8.6 MiB =  13.1 MiB	smbd (3)
       12.4 MiB +   1.3 MiB =  13.7 MiB	slimski
       11.7 MiB +   4.5 MiB =  16.2 MiB	roxterm
       19.6 MiB +   3.0 MiB =  22.6 MiB	zzzfm
       41.2 MiB +  28.0 MiB =  69.1 MiB	cmst
       62.2 MiB +  25.3 MiB =  87.5 MiB	Xorg
      ---------------------------------
                              295.9 MiB
      =================================
      System:
        Host: antix-x64-init-diversity Kernel: 6.7.4-2-liquorix-amd64
          arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
        Desktop: IceWM v: 3.4.5 Distro: antiX-23.1_amd64-init-diversity
          February 14 2024 base: Debian GNU/Linux 12 (bookworm)
      Machine:
        Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A
          serial: <superuser required>
        Mobo: HP model: 887C v: 59.11 serial: <superuser required>
          uuid: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021
      Battery:
        ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%)
          volts: 12.8 min: 11.3 model: HP Primary status: not charging
      Memory:
        System RAM: total: 8 GiB available: 7.1 GiB used: 700.4 MiB (9.6%)
        Array-1: capacity: 32 GiB slots: 2 modules: 1 EC: None
          max-module-size: 16 GiB note: est.
        Device-1: Bottom - Slot 1 (left) type: DDR4 size: 8 GiB
          speed: 3200 MT/s
        Device-2: Bottom - Slot 2 (right) type: no module installed
      CPU:
        Info: 6-core model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64
          type: MT MCP arch: Zen 2 rev: 1 cache: L1: 384 KiB L2: 3 MiB
          L3: 8 MiB
        Speed (MHz): avg: 817 high: 2071 min/max: 400/4056 cores: 1: 2071
          2: 400 3: 2071 4: 400 5: 400 6: 400 7: 2071 8: 400 9: 400 10: 400
          11: 400 12: 400 bogomips: 50304
        Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a
          ssse3 svm
      Graphics:
        Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu
          v: kernel arch: GCN-5 bus-ID: 03:00.0 temp: 42.0 C
        Device-2: Chicony HP TrueVision HD Camera driver: uvcvideo
          type: USB bus-ID: 1-3:3
        Display: server: X.Org v: 1.21.1.7 driver: X: loaded: amdgpu
          unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu
          resolution: 1920x1080~60Hz
        API: EGL v: 1.4,1.5 drivers: kms_swrast,radeonsi,swrast platforms:
          active: gbm,x11,surfaceless,device inactive: wayland
        API: OpenGL v: 4.6 vendor: amd mesa v: 22.3.6 glx-v: 1.4
          direct-render: yes renderer: AMD Radeon Graphics (renoir LLVM
          15.0.6 DRM 3.57 6.7.4-2-liquorix-amd64)
      Audio:
        Device-1: AMD Renoir Radeon High Definition Audio
          vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
          bus-ID: 03:00.1
        Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor
          vendor: Hewlett-Packard driver: snd_rn_pci_acp3x v: kernel
          bus-ID: 03:00.5
        Device-3: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard
          driver: snd_hda_intel v: kernel bus-ID: 03:00.6
        API: ALSA v: k6.7.4-2-liquorix-amd64 status: kernel-api
        Server-1: PipeWire v: 1.0.3 status: active
      Network:
        Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae
          v: kernel port: f000 bus-ID: 01:00.0
        IF: wlan0 state: up mac: d8:80:83:b7:f8:bd
      Bluetooth:
        Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB
          bus-ID: 1-4:4
        Report: hciconfig ID: hci0 rfk-id: 1 state: down
          bt-service: stopped rfk-block: hardware: no software: yes
          address: D8:80:83:B7:F8:BE
      Drives:
        Local Storage: total: 238.47 GiB used: 8.71 GiB (3.7%)
        ID-1: /dev/nvme0n1 vendor: Toshiba model: KBG40ZNV256G KIOXIA
          size: 238.47 GiB temp: 25.9 C
        Message: No optical or floppy data found.
      Partition:
        ID-1: / size: 47.76 GiB used: 8.71 GiB (18.2%) fs: ext4
          dev: /dev/nvme0n1p3 label: rootantiX23
          uuid: 022ea241-62e0-47df-aa05-2d5665b5e2e4
        ID-2: /sys/firmware/efi/efivars size: 128 KiB used: 34 KiB (26.6%)
          fs: efivarfs source: ERR-102
      Swap:
        Alert: No swap data was found.
      Unmounted:
        ID-1: /dev/nvme0n1p1 size: 47.85 GiB fs: ext4 label: rootantiX23.1
          uuid: d7b07fc0-6501-45fa-8de4-4669a6ebc35c
        ID-2: /dev/nvme0n1p2 size: 1.23 GiB fs: vfat label: N/A
          uuid: 6EDC-B440
        ID-3: /dev/nvme0n1p4 size: 48.83 GiB fs: ext4 label: rootMX23
          uuid: be9710bc-654b-4fc6-8401-fa3ff0d70b46
        ID-4: /dev/nvme0n1p5 size: 48.83 GiB fs: ext4 label: rootantiX23
          uuid: 1480170f-3bd2-4337-af59-015e667f24bc
        ID-5: /dev/nvme0n1p6 size: 7.81 GiB fs: swap label: N/A
          uuid: d5ee9225-6bf8-4ea5-9299-547b7272c289
        ID-6: /dev/nvme0n1p7 size: 35.1 GiB fs: ext4 label: N/A
          uuid: acab5ff7-122e-4f43-95e7-e7949c655cda
      Sensors:
        System Temperatures: cpu: 46.6 C mobo: N/A gpu: amdgpu temp: 43.0 C
        Fan Speeds (rpm): fan-1: 0 fan-2: 0
      Info:
        Processes: 339 Uptime: 11m Init: s6
        Packages: 2037 Compilers: gcc: 12.2.0 Shell: Bash v: 5.2.15
          pinxi: 3.3.33-2
       PID TTY      STAT   TIME COMMAND
          1 ?        S      0:00 /usr/bin/s6-svscan -t 0 -L 256 /run/66/scandir/0

      --
      Brian Masinick

      #133376
      Member
      Colonel Panic

        Hi ProwlerGr,

        Thanks for all the hard work you’ve put into this respin. I’m posting from it now, having installed it to my hard drive, and am very impressed.

        #133377
        Moderator
        Brian Masinick

          @colonel-panic Which init are you running at the moment:
          1) sysvinit /2) runit /3) s6-rc /4) s6-66?

          I’m using s6-66 as I type this and it’s great for recent vintage hardware and software.

          --
          Brian Masinick

          #133379
          Member
          fungalnet

            Congratulations

            The way joborun-linux has chosen to use runit & 66 installed together is to move the 4 power functions from runit and 66 into /usr/bin/run and /usr/bin/s6 and then have a setup package that links corresponding function to little scripts running both with a 2>/dev/null at the end so the one of the error is hidden.
            so reboot runs both runit and 66 reboot.
            Otherwise there is no overlap between them. It has worked well for more than 2 years.
            Also zzz script from runit seems to work on both systems and has been 100% reliable, I don’t know whether it matches more hybernate or suspend. A little led light flashes and any keyboard button turns the system back to any state it was before zzz was executed.

            #133388
            Member
            Colonel Panic

              Hi Brian,

              I’m using s6-66, and no problems so far. Thanks for asking.

              BTW, I’ve got a Dell Vostro 460 desktop computer from 2012.

              • This reply was modified 4 months, 1 week ago by Colonel Panic.
              #133412
              Moderator
              Brian Masinick

                Hi Brian,

                I’m using s6-66, and no problems so far. Thanks for asking.

                BTW, I’ve got a Dell Vostro 460 desktop computer from 2012.

                I like that one too on my faster system.
                We keep sysVinit because we have a mature set of complete services, as opposed to our very lean, but blended implementation of runit. By the way, our runit implementation is still a favorite; I have it installed on all three of my antiX partitions on my HP-14 laptop. But I also love diversity so I am becoming more familiar with 66, just as I became familiar with runit a few years ago.

                --
                Brian Masinick

                #133446
                Member
                ile

                  hello anticapitalista
                  23.1_64 volumeicon
                  live usb: it works.

                  installed: hdd sata
                  Tray volumeicon never starts in a fluxbox selection.
                  volumeicon sometimes starts in jwm.
                  volumeicon always starts in icewm.
                  That is fresh booting into those sessions;
                  when using the desktop switcher in menu the volumeicon appears and will then show (where it was missing on that first log-in.)

                  fluxbox /menu-applications is not populated on first log-in.

                  zzz-fluxbox was starting with pipewire off; after toggling pipewire on-off-on, pipewire is now always found started On. Have not found pipewire off since toggling it.

                  user manager able to create new user. user manager did not open from rootmenu> Categories>antiX>antiX User Manager; it did open from Control Centre.

                  That is just little poking. Will dinit ever be a choice?
                  The big picture:
                  Diversity selections are operational.

                  System:
                    Host: antix-x64-init-diversity Kernel: 5.10.188-antix.1-amd64-smp
                      arch: x86_64 bits: 64 compiler: gcc v: 13.2.0 clocksource: tsc
                      available: hpet,acpi_pm
                      parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.188-antix.1-amd64-smp
                      root=UUID=0981a387-3638-4634-aca0-e3176520dee5 ro quiet selinux=0
                      savedefault init=/lib/runit/runit-init
                    Desktop: Fluxbox v: 1.3.7 dm: slimski v: 1.5.0 Distro: Debian GNU/Linux
                      12 (bookworm) base: Debian GNU/Linux 12 (bookworm)
                  Machine:
                    Type: Desktop System: HP-Pavilion product: AY022AA-ABA p6330f v: N/A
                      serial: <superuser required> Chassis: Hewlett-Packard type: 3
                      serial: <superuser required>
                    Mobo: MSI model: IONA v: 1.0 serial: <superuser required>
                      BIOS: American Megatrends v: 5.15 date: 06/25/2010
                  CPU:
                    Info: dual core Intel Core i3 530 [MT MCP] arch: Westmere speed (MHz):
                      avg: 2504 min/max: 1200/2933
                  Graphics:
                    Device-1: Intel Core Processor Integrated Graphics vendor: Hewlett-Packard
                      driver: i915 v: kernel arch: Gen-5.75 process: Intel 45nm built: 2010 ports:
                      active: VGA-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:0042
                      class-ID: 0300
                    Display: server: X.Org v: 1.21.1.7 driver: X: loaded: intel dri: crocus
                      gpu: i915 resolution: 1920x1080~60Hz
                    API: OpenGL v: 2.1 vendor: intel mesa v: 22.3.6 glx-v: 1.4 es-v: 2.0
                      direct-render: yes renderer: Mesa Intel HD Graphics (ILK)
                      device-ID: 8086:0042 memory: 1.46 GiB unified: yes
                  Network:
                    Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
                      vendor: Hewlett-Packard driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
                      lanes: 1 port: d800 bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
                  Drives:
                    Local Storage: total: 232.89 GiB used: 9 GiB (3.9%)
                  Repos:
                    Packages: pm: dpkg pkgs: 2030 libs: 989
                      tools: apt,apt-get,aptitude,nala,synaptic
                    Active apt repos in: /etc/apt/sources.list.d/antix.list
                      1: deb [signed-by=/etc/apt/keyrings/antix-archive-keyring.gpg] http://la.mxrepo.com/antix/bookworm/ bookworm main nonfree nosystemd
                    No active apt repos in: /etc/apt/sources.list.d/bookworm-backports.list
                    Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
                      1: deb http://ftp.us.debian.org/debian/ bookworm-updates main contrib non-free non-free-firmware
                    No active apt repos in: /etc/apt/sources.list.d/debian-unstable.list
                    Active apt repos in: /etc/apt/sources.list.d/debian.list
                      1: deb http://ftp.us.debian.org/debian/ bookworm main contrib non-free non-free-firmware
                      2: deb http://security.debian.org/ bookworm-security main contrib non-free non-free-firmware
                    Active apt repos in: /etc/apt/sources.list.d/experimental-s6.list
                      1: deb http://deb-s6-rc-66-init-experimental.duckdns.org:8080/ experimental-s6 antix-s6
                      2: deb-src http://deb-s6-rc-66-init-experimental.duckdns.org:8080/ experimental-s6 antix-s6
                    No active apt repos in: /etc/apt/sources.list.d/librewolf.list
                    No active apt repos in: /etc/apt/sources.list.d/liquorix.list
                  Weather:
                    Report: temperature: 4.85 C (41 F) conditions: clear sky wind: from ESE at
                      2.1 m/s (7 km/h, 5 mph) cloud cover: 0% humidity: 45%
                      pressure: 1011 mb (34 in)
                    Locale: Washington, US, 20500 current time: Sat 17 Feb 2024 01:14:36 AM
                      GMT observation time: N/A Source: OpenWeatherMap.org
                  Info:
                    Processes: 181 Uptime: 1h 35m wakeups: 0 Memory: total: 8 GiB
                    available: 7.62 GiB used: 524.8 MiB (6.7%) Init: runit v: N/A default: 5
                    tool: service Compilers: gcc: 12.2.0 alt: 12 Shell: Bash v: 5.2.15
                    running-in: roxterm inxi: 3.3.31
                  #133482
                  Moderator
                  Brian Masinick
                      PID TTY      STAT   TIME COMMAND
                        1 ?        Ss     0:00 init [5]
                    sysVinit
                    pstree;sudo ps_mem.py ;pinxi -zv5xxopy71
                    init─┬─acpid
                         ├─anacron
                         ├─avahi-daemon───avahi-daemon
                         ├─bluetoothd
                         ├─conky───4*[{conky}]
                         ├─connmand
                         ├─cron
                         ├─cupsd
                         ├─3*[dbus-daemon]
                         ├─dbus-launch
                         ├─devmon───udevil
                         ├─dhcpcd─┬─dhcpcd───dhcpcd
                         │        └─2*[dhcpcd]
                         ├─6*[getty]
                         ├─gpm
                         ├─haveged
                         ├─nmbd
                         ├─pipewire-pulse───2*[{pipewire-pulse}]
                         ├─pipewire-start───pipewire───2*[{pipewire}]
                         ├─roxterm───bash───pstree
                         ├─rpc.idmapd
                         ├─rpc.statd
                         ├─rpcbind
                         ├─runsvdir───6*[runsv]
                         ├─saned───saned
                         ├─seatd
                         ├─slimski─┬─Xorg───9*[{Xorg}]
                         │         └─desktop-session───icewm-session───icewm
                         ├─smartd
                         ├─smbd─┬─cleanupd
                         │      └─smbd-notifyd
                         ├─sshd
                         ├─startup───volumeicon───3*[{volumeicon}]
                         ├─udevd
                         ├─wireplumber───4*[{wireplumber}]
                         ├─wpa_supplicant
                         ├─xrdp-sesman
                         └─zzzfm
                     Private  +   Shared  =  RAM used	Program
                    124.0 KiB +  20.5 KiB = 144.5 KiB	runsvdir
                    156.0 KiB +  35.5 KiB = 191.5 KiB	seatd
                    196.0 KiB +  16.5 KiB = 212.5 KiB	gpm
                    224.0 KiB +  30.5 KiB = 254.5 KiB	anacron
                    224.0 KiB +  40.5 KiB = 264.5 KiB	init
                    304.0 KiB +  27.5 KiB = 331.5 KiB	acpid
                    288.0 KiB +  50.5 KiB = 338.5 KiB	cron
                    264.0 KiB + 161.5 KiB = 425.5 KiB	pipewire-start
                    272.0 KiB + 166.5 KiB = 438.5 KiB	startup
                    392.0 KiB + 126.5 KiB = 518.5 KiB	dbus-launch
                    448.0 KiB + 101.5 KiB = 549.5 KiB	rpcbind
                    344.0 KiB + 207.5 KiB = 551.5 KiB	udevil
                    456.0 KiB +  98.5 KiB = 554.5 KiB	rpc.statd
                    556.0 KiB +  91.5 KiB = 647.5 KiB	rpc.idmapd
                    372.0 KiB + 299.5 KiB = 671.5 KiB	icewm-session
                    136.0 KiB + 540.0 KiB = 676.0 KiB	saned (2)
                    548.0 KiB + 165.0 KiB = 713.0 KiB	runsv (6)
                    820.0 KiB +  29.5 KiB = 849.5 KiB	xrdp-sesman
                    460.0 KiB + 428.0 KiB = 888.0 KiB	avahi-daemon (2)
                    632.0 KiB + 322.5 KiB = 954.5 KiB	devmon
                    816.0 KiB + 304.5 KiB =   1.1 MiB	desktop-session
                      1.1 MiB +  17.5 KiB =   1.2 MiB	smartd
                    868.0 KiB + 455.0 KiB =   1.3 MiB	getty (6)
                    648.0 KiB + 776.5 KiB =   1.4 MiB	dhcpcd (5)
                      1.2 MiB + 382.5 KiB =   1.6 MiB	dbus-daemon (3)
                      1.7 MiB +  21.5 KiB =   1.7 MiB	sshd
                    900.0 KiB + 866.0 KiB =   1.7 MiB	sudo (2)
                      1.6 MiB + 226.5 KiB =   1.9 MiB	connmand
                      1.5 MiB + 763.5 KiB =   2.2 MiB	pipewire-pulse
                      2.0 MiB + 363.5 KiB =   2.3 MiB	bash
                      2.1 MiB + 332.5 KiB =   2.4 MiB	bluetoothd
                      2.2 MiB + 452.5 KiB =   2.6 MiB	udevd
                      2.3 MiB + 675.5 KiB =   2.9 MiB	cupsd
                      3.2 MiB +  18.5 KiB =   3.2 MiB	haveged
                      3.3 MiB + 771.5 KiB =   4.0 MiB	conky
                      2.8 MiB +   1.4 MiB =   4.2 MiB	nmbd
                      5.0 MiB +   1.3 MiB =   6.3 MiB	pipewire
                      7.0 MiB + 517.5 KiB =   7.5 MiB	wpa_supplicant
                      3.6 MiB +   4.0 MiB =   7.6 MiB	volumeicon
                      5.4 MiB +   2.5 MiB =   8.0 MiB	icewm
                      8.5 MiB +   1.8 MiB =  10.2 MiB	wireplumber
                      4.4 MiB +   6.1 MiB =  10.4 MiB	smbd (3)
                     12.2 MiB +   1.1 MiB =  13.3 MiB	slimski
                     12.1 MiB +   5.3 MiB =  17.4 MiB	roxterm
                     19.9 MiB +   3.7 MiB =  23.7 MiB	zzzfm
                    106.3 MiB +   1.6 MiB = 107.9 MiB	Xorg
                    ---------------------------------
                                            257.8 MiB
                    =================================
                    System:
                      Kernel: 6.7.4-2-liquorix-amd64 arch: x86_64 bits: 64 compiler: gcc
                        v: 12.2.0 clocksource: hpet
                      Desktop: IceWM v: 3.4.5 dm: slimski v: 1.5.0
                        Distro: antiX-23.1_amd64-init-diversity February 14 2024 base: Debian
                        GNU/Linux 12 (bookworm)
                    Machine:
                      Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A
                        serial: <superuser required> Chassis: type: 10
                        serial: <superuser required>
                      Mobo: HP model: 887C v: 59.11 serial: <superuser required>
                        part-nu: 51N12UA#ABA uuid: <superuser required> UEFI: AMI v: F.18
                        date: 11/26/2021
                    Battery:
                      ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%)
                        volts: 12.8 min: 11.3 model: HP Primary type: Li-ion
                        serial: <filter> status: not charging
                    Memory:
                      System RAM: total: 8 GiB available: 7.1 GiB used: 706.3 MiB (9.7%)
                      Message: For most reliable report, use superuser + dmidecode.
                      Array-1: capacity: 32 GiB slots: 2 modules: 1 EC: None
                        max-module-size: 16 GiB note: est.
                      Device-1: Bottom - Slot 1 (left) type: DDR4 detail: synchronous
                        unbuffered (unregistered) size: 8 GiB speed: 3200 MT/s volts: 1
                        note: check width (bits): data: 64 total: 64 manufacturer: Samsung
                        part-no: M471A1K43EB1-CWE serial: <filter>
                      Device-2: Bottom - Slot 2 (right) type: no module installed
                    CPU:
                      Info: 6-core model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64
                        type: MT MCP smt: enabled arch: Zen 2 rev: 1 cache: L1: 384 KiB
                        L2: 3 MiB L3: 8 MiB
                      Speed (MHz): avg: 576 high: 2521 min/max: 400/4056 cores: 1: 400
                        2: 400 3: 400 4: 400 5: 400 6: 400 7: 2521 8: 400 9: 400 10: 400
                        11: 400 12: 400 bogomips: 50304
                      Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a
                        ssse3 svm
                    Graphics:
                      Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu
                        v: kernel arch: GCN-5 pcie: speed: 8 GT/s lanes: 16 ports:
                        active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:164c
                        class-ID: 0300 temp: 41.0 C
                      Device-2: Chicony HP TrueVision HD Camera driver: uvcvideo
                        type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 1-3:3
                        chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter>
                      Display: server: X.Org v: 1.21.1.7 driver: X: loaded: amdgpu
                        unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu
                        display-ID: :0.0 screens: 1
                      Screen-1: 0 s-res: 1920x1080 s-dpi: 96
                        s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
                      Monitor-1: eDP-1 mapped: eDP model: ChiMei InnoLux 0x1429
                        res: 1920x1080 hz: 60 dpi: 158 size: 309x173mm (12.17x6.81")
                        diag: 354mm (13.9") modes: max: 1920x1080 min: 640x480
                      API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0
                        drv: radeonsi device: 1 drv: swrast gbm: egl: 1.4 drv: kms_swrast
                        surfaceless: drv: radeonsi x11: drv: radeonsi inactive: wayland
                      API: OpenGL v: 4.6 vendor: amd mesa v: 22.3.6 glx-v: 1.4 es-v: 3.2
                        direct-render: yes renderer: AMD Radeon Graphics (renoir LLVM
                        15.0.6 DRM 3.57 6.7.4-2-liquorix-amd64) device-ID: 1002:164c
                    Audio:
                      Device-1: AMD Renoir Radeon High Definition Audio
                        vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie:
                        speed: 8 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:1637
                        class-ID: 0403
                      Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor
                        vendor: Hewlett-Packard driver: snd_rn_pci_acp3x v: kernel pcie:
                        speed: 8 GT/s lanes: 16 bus-ID: 03:00.5 chip-ID: 1022:15e2
                        class-ID: 0480
                      Device-3: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard
                        driver: snd_hda_intel v: kernel pcie: speed: 8 GT/s lanes: 16
                        bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403
                      API: ALSA v: k6.7.4-2-liquorix-amd64 status: kernel-api
                        with: apulse type: pulse-emulator
                      Server-1: PipeWire v: 1.0.3 status: active with: 1: pipewire-pulse
                        status: active 2: wireplumber status: active 3: pipewire-alsa
                        type: plugin 4: pw-jack type: plugin
                    Network:
                      Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae
                        v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 01:00.0
                        chip-ID: 10ec:a85a class-ID: 0280
                      IF: wlan0 state: up mac: <filter>
                    Bluetooth:
                      Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB
                        rev: 1.0 speed: 12 Mb/s lanes: 1 bus-ID: 1-4:4 chip-ID: 0bda:385a
                        class-ID: e001 serial: <filter>
                      Report: hciconfig ID: hci0 rfk-id: 1 state: down
                        bt-service: running rfk-block: hardware: no software: yes
                        address: <filter>
                    Drives:
                      Local Storage: total: 238.47 GiB used: 8.66 GiB (3.6%)
                      ID-1: /dev/nvme0n1 vendor: Toshiba model: KBG40ZNV256G KIOXIA
                        size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 tech: SSD
                        serial: <filter> fw-rev: HP00AE00 temp: 26.9 C scheme: GPT
                      Message: No optical or floppy data found.
                    Partition:
                      ID-1: / size: 47.76 GiB used: 8.66 GiB (18.1%) fs: ext4
                        dev: /dev/nvme0n1p3 label: rootantiX23
                        uuid: 022ea241-62e0-47df-aa05-2d5665b5e2e4
                      ID-2: /boot/efi size: 1.23 GiB used: 1000 KiB (0.1%) fs: vfat
                        dev: /dev/nvme0n1p2 label: N/A uuid: 6EDC-B440
                    Swap:
                      ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%)
                        priority: -2 dev: /dev/nvme0n1p6 label: N/A
                        uuid: d5ee9225-6bf8-4ea5-9299-547b7272c289
                    Unmounted:
                      ID-1: /dev/nvme0n1p1 size: 47.85 GiB fs: ext4 label: rootantiX23.1
                        uuid: d7b07fc0-6501-45fa-8de4-4669a6ebc35c
                      ID-2: /dev/nvme0n1p4 size: 48.83 GiB fs: ext4 label: rootMX23
                        uuid: be9710bc-654b-4fc6-8401-fa3ff0d70b46
                      ID-3: /dev/nvme0n1p5 size: 48.83 GiB fs: ext4 label: rootantiX23
                        uuid: 1480170f-3bd2-4337-af59-015e667f24bc
                      ID-4: /dev/nvme0n1p7 size: 35.1 GiB fs: ext4 label: N/A
                        uuid: acab5ff7-122e-4f43-95e7-e7949c655cda
                    Sensors:
                      System Temperatures: cpu: 46.0 C mobo: N/A gpu: amdgpu temp: 41.0 C
                      Fan Speeds (rpm): fan-1: 0 fan-2: 0
                    Info:
                      Processes: 382 Power: uptime: 3m states: freeze,mem,disk
                        suspend: s2idle wakeups: 0 hibernate: platform Init: SysVinit
                        v: 3.06 runlevel: 5 default: 5
                      Packages: pm: dpkg pkgs: 2034 Compilers: gcc: 12.2.0 Shell: Bash
                        v: 5.2.15 running-in: roxterm pinxi: 3.3.33-2
                    • This reply was modified 4 months, 1 week ago by Brian Masinick.
                    • This reply was modified 4 months, 1 week ago by Brian Masinick.

                    --
                    Brian Masinick

                    #133746
                    Forum Admin
                    dolphin_oracle

                      I have a dumb question. If I add a new service package, do the newer init options require special service files to get them started up, or do they use existing systemd service files or sysVinit scripts?

                      #133748
                      Forum Admin
                      anticapitalista

                        I have a dumb question. If I add a new service package, do the newer init options require special service files to get them started up, or do they use existing systemd service files or sysVinit scripts?

                        Specific service files are required for each init, though technically, the init might be able to use another init’s service file (I think).
                        For example, Debian runit and s6 basically piggyback on sysVinit init.d scripts (antiX runit and now our implementation of s6 doesn’t).
                        I read that s6 can use runit service scripts, but doing so doesn’t unleash the full potential of s6.
                        66 needs s6 but it has its own service files.
                        At the moment, we don’t have any packaged s6 or 66 service files.
                        HTH

                        Philosophers have interpreted the world in many ways; the point is to change it.

                        antiX with runit - leaner and meaner.

                        #133825
                        Member
                        calciumsodium

                          Currently, I have two observations about s6-66 as currently implemented that I have some problems with. I don’t know if I am not doing it right or if it needs to be optimized.

                          The first is that if I install 100% to the root partition /, the run/66/scandir is not automatically created. I have to use sudo 66 scandir create immediately after first boot to create this scandir directory. Shouldn’t it be automatically created, instead of this manual fix?

                          The second one is more bothersome to me. Everytime I boot into s6-66, it resets my hardware clock to GMT timezone, instead of localtime that I had set up during install.

                          I tried to use sudo 66 config -e nano boot@system and reset tz to Central or CST, followed by sudo 66 reconfigure boot@system, and it does not solve the problem. It still says GMT. I also tried to change hwclock to localtime further down in this boot@system, but it sets time to UTC as a result. Then when I boot up to runit, or sysvinit, or S6-rc, my time is all messed up. This is very annoying. Then I have to go into Control Centre > System > Set date and time to reset my time zone and hwclock again. Runit, Sysvinit, and s6-rc in this init diversity do not have this problem. Only s6-66.

                          • This reply was modified 4 months ago by calciumsodium.
                          • This reply was modified 4 months ago by calciumsodium.
                          #133847
                          Moderator
                          Brian Masinick

                            Currently, I have two observations about s6-66 as currently implemented that I have some problems with. I don’t know if I am not doing it right or if it needs to be optimized.

                            The first is that if I install 100% to the root partition /, the run/66/scandir is not automatically created. I have to use sudo 66 scandir create immediately after first boot to create this scandir directory. Shouldn’t it be automatically created, instead of this manual fix?

                            The second one is more bothersome to me. Every time I boot into s6-66, it resets my hardware clock to GMT timezone, instead of local time that I had set up during install.

                            I tried to use sudo 66 config -e nano boot@system and reset tz to Central or CST, followed by sudo 66 reconfigure boot@system, and it does not solve the problem. It still says GMT. I also tried to change hwclock to localtime further down in this boot@system, but it sets time to UTC as a result. Then when I boot up to runit, or sysvinit, or S6-rc, my time is all messed up. This is very annoying. Then I have to go into Control Centre > System > Set date and time to reset my time zone and hwclock again. Runit, Sysvinit, and s6-rc in this init diversity do not have this problem. Only s6-66.

                            I’ve seen this too; I wrote this one for me; adjust slightly to suit your specific needs.
                            You can also sudo geany /etc/timezone and quickly change that with a one liner too.

                            cat fix-localtime.bash 
                            sudo ln -sf /usr/share/zoneinfo/EST5EDT /etc/localtime

                            Yes, this is a minor issue; given that this is a concept version at this point, it’s worth mentioning, but not difficult to fix.
                            Creating a one line localtime file in your directory, then doing an sudo cp of these two files, it can be semi-automatic;
                            if it bugs you, put both into your .bashrc for the init-diversity and until a permanent fix is provided for this, you
                            can forget about it.

                            • This reply was modified 4 months ago by Brian Masinick.

                            --
                            Brian Masinick

                            #133961
                            Member
                            eric

                              @calciumsodium
                              Just to say, i saw your post, but i don’t have time to test and report before next Wednesday.

                              #133970
                              Member
                              calciumsodium

                                Hi @eric,

                                Thanks. No rush. I am still trying out the system.

                                In the boot@system, I also tried setting tz=/etc/localtime, which would be CST for me. But it still gave GMT time.

                                Another question.

                                I see that the service files that are active are in /var/lib/66/system/svc/ folder. Is this correct?

                                I know that you are still working on a 66 service manager. No rush. Could you please provide some tips, in the meantime, on how to manually enable/disable a service in s6-66? I tried to manually delete some of these services that I don’t use in this folder just to see if it would work. It did not turn out well.
                                Thanks.

                                #133977
                                Member
                                ProwlerGr

                                  A great resource which has assisted me & should assist everybody else to get a better understanding of the 66 suite:

                                  https://web.obarun.org/software/66/latest/66-deeper.html

                                  @calciumsodium I’m sure you will find this very useful.

                                Viewing 15 posts - 196 through 210 (of 277 total)
                                • You must be logged in to reply to this topic.