Ati RV370 problem

Forum Forums General Hardware Ati RV370 problem

  • This topic has 0 replies, 1 voice, and was last updated Nov 12-10:41 am by anewangelfades.
Viewing 1 post (of 1 total)
  • Author
  • #29281

      I have a problem with 3D graphics acceleration after I install antix on my hard disk, for example glxgears shows a black window only, while it works in the live session if I boot from DVD.

      The output of inxi -Fxz -r is the following:

        Host: antix-fisso Kernel: 5.2.15-antix.1-amd64-smp x86_64 bits: 64 
        compiler: gcc v: 8.3.0 Desktop: JWM 2.3.7 
        Distro: antiX-19_x64-full Marielle Franco 16 October 2019 
        base: Debian GNU/Linux 10 (buster) 
        Type: Desktop Mobo: ASUSTeK model: P5SD2-X v: Rev 1.xx serial: <filter> 
        BIOS: American Megatrends v: 0605 date: 03/21/2006 
        Topology: Single Core model: Intel Pentium 4 bits: 64 type: MT 
        arch: Netburst Smithfield rev: 3 L2 cache: 2048 KiB 
        flags: lm nx pae sse sse2 sse3 bogomips: 12000 
        Speed: 3000 MHz min/max: N/A Core speeds (MHz): 1: 3000 2: 3000 
        Device-1: AMD RV370 [Radeon X300] vendor: PC Partner Limited 
        driver: radeon v: kernel bus ID: 01:00.0 
        Display: x11 server: X.Org 1.20.4 driver: ati,radeon 
        unloaded: fbdev,modesetting,vesa resolution: 1680x1050~60Hz 
        OpenGL: renderer: ATI RV370 v: 2.1 Mesa 18.3.6 direct render: Yes 
        Device-1: Silicon Integrated Systems [SiS] SiS7012 AC97 Sound 
        vendor: ASUSTeK A8S-X driver: snd_intel8x0 v: kernel bus ID: 00:02.7 
        Sound Server: ALSA v: k5.2.15-antix.1-amd64-smp 
        Device-1: Intel 82540EM Gigabit Ethernet vendor: ASUSTeK driver: e1000 
        v: 7.3.21-k8-NAPI port: 9000 bus ID: 00:0e.0 
        IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> 
        Local Storage: total: 310.10 GiB used: 5.38 GiB (1.7%) 
        ID-1: /dev/sda vendor: Maxtor model: 6L250R0 size: 233.76 GiB 
        ID-2: /dev/sdb vendor: Maxtor model: 6Y080L0 size: 76.34 GiB 
        ID-1: / size: 227.09 GiB used: 5.38 GiB (2.4%) fs: ext4 dev: /dev/sda1 
        ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2 
        Message: No sensors data was found. Is sensors configured? 
        Active apt repos in: /etc/apt/sources.list.d/antix.list 
        1: deb buster main nonfree
        Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
        1: deb buster-updates main contrib non-free
        Active apt repos in: /etc/apt/sources.list.d/debian.list 
        1: deb buster main contrib non-free
        2: deb buster/updates main contrib non-free
        No active apt repos in: /etc/apt/sources.list.d/onion.list 
        No active apt repos in: /etc/apt/sources.list.d/various.list 
        Processes: 122 Uptime: 21m Memory: 1.94 GiB used: 515.7 MiB (25.9%) 
        Init: SysVinit runlevel: 5 Compilers: gcc: 8.3.0 Shell: bash v: 5.0.3 
        inxi: 3.0.36 

      Do anybody know why?
      Thanks in advance

      • This topic was modified 4 years, 8 months ago by anewangelfades.
    Viewing 1 post (of 1 total)
    • You must be logged in to reply to this topic.