broken Audacity 2.4.1 package

Forum Forums General Software broken Audacity 2.4.1 package

  • This topic has 2 replies, 3 voices, and was last updated Sep 27-12:46 pm by caprea.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #42295
    Member
    Curious_from_country

      Greetings from Latvia!

      Attention to broken Audacity 2.4.1 package.
      Practically – there are no entry ‘Silence finder’ in menu “Analyze”.
      Further – everything is missing that uses ‘Nyquist’ library.

      Audacity team acknowledges problem.
      (bad Nyquist library used when compiling … )

      Every other [version of] Audacity within reach works good (for me):
      [2.1.2; 2.2.2; 2.3.3; 2.4.2 …]

      Problem is not recent; but I thought that some other will find it out. Sorry.

      I do not understand how to install other version of Audacity that
      differs from one in repository … .

      If it is not possible to correct repository (seems to be — MX repository)
      may be there are some method how to get working version of Audacity??

      =====

      After long time spent seeking other Linux I am back with AntiX … .

      Best regards …

      =============================================

      I am on

      System: Host: my Kernel: 4.9.212-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 8.3.0 Desktop: IceWM 1.8.3
      dm: SLiM 1.3.6 Distro: antiX-19.2_x64-full Hannie Schaft 27 March 2020 base: Debian GNU/Linux 10 (buster)
      Machine: Type: Laptop System: Hewlett-Packard product: HP ProBook 645 G1 v: A3009CD10203 serial: <filter> Chassis:
      type: 10 serial: <filter>
      Mobo: Hewlett-Packard model: 1992 v: KBC Version 05.2E serial: <filter> BIOS: Hewlett-Packard
      v: L72 Ver. 01.21 date: 09/16/2014
      Battery: ID-1: BAT0 charge: 46.1 Wh condition: 46.1/46.1 Wh (100%) volts: 12.5/10.8 model: Hewlett-Packard Primary
      type: Li-ion serial: <filter> status: Full
      Memory: RAM: total: 14.88 GiB used: 319.3 MiB (2.1%)
      Array-1: capacity: 16 GiB slots: 2 EC: None max module size: 8 GiB note: est.
      Device-1: Bottom-Slot 1(top) size: 8 GiB speed: 1600 MT/s type: DDR3 detail: synchronous bus width: 64 bits
      total: 64 bits manufacturer: Kingston part-no: 99U5428-018.A00LF serial: <filter>
      Device-2: Bottom-Slot 2(under) size: 8 GiB speed: 1600 MT/s type: DDR3 detail: synchronous bus width: 64 bits
      total: 64 bits manufacturer: Kingston part-no: 99U5428-018.A00LF serial: <filter>
      CPU: Topology: Dual Core model: AMD A6-5350M APU with Radeon HD Graphics bits: 64 type: MCP arch: Piledriver rev: 1
      L1 cache: 96 KiB L2 cache: 1024 KiB bogomips: 11578
      Speed: 1400 MHz min/max: 1400/2900 MHz boost: enabled Core speeds (MHz): 1: 1400 2: 1400
      Flags: 3dnowprefetch abm aes aperfmperf apic arat avx bmi1 clflush cmov cmp_legacy constant_tsc cpb cr8_legacy
      cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid fma fma4 fpu fxsr fxsr_opt ht hw_pstate ibs
      lahf_lm lbrv lm lwp mca mce misalignsse mmx mmxext monitor msr mtrr nodeid_msr nonstop_tsc nopl npt nrip_save
      nx osvw pae pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_nb pfthreshold pge pni popcnt pse pse36
      rdtscp rep_good sep skinit ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 svm svm_lock syscall tbm tce topoext tsc
      tsc_scale vmcb_clean vme vmmcall wdt xop xsave

      Audio: Device-1: Advanced Micro Devices [AMD/ATI] Trinity HDMI Audio vendor: Hewlett-Packard driver: snd_hda_intel
      v: kernel bus ID: 00:01.1 chip ID: 1002:9902
      Device-2: Advanced Micro Devices [AMD] FCH Azalia vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
      bus ID: 00:14.2 chip ID: 1022:780d
      Sound Server: ALSA v: k4.9.212-antix.1-amd64-smp
      Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard driver: r8169
      v: 2.3LK-NAPI port: 4000 bus ID: 01:00.0 chip ID: 10ec:8168
      IF: eth0 state: down mac: <filter>
      Device-2: Broadcom Limited BCM43228 802.11a/b/g/n driver: wl v: kernel port: 4000 bus ID: 03:00.0
      chip ID: 14e4:4359
      IF: wlan0 state: up mac: <filter>
      IP v4: <filter> scope: global broadcast: <filter>
      IP v6: <filter> scope: link
      WAN IP: <filter>
      Drives: Local Storage: total: 465.76 GiB used: 5.58 GiB (1.2%)
      ID-1: /dev/sda vendor: Seagate model: ST500LM012 HN-M500MBB size: 465.76 GiB speed: 6.0 Gb/s
      rotation: 5400 rpm serial: <filter> rev: 0001 scheme: MBR
      Message: No Optical or Floppy data was found.
      Partition: ID-1: / size: 455.45 GiB used: 5.58 GiB (1.2%) fs: ext4 dev: /dev/sda1 label: rootantiX19
      uuid: 73b184dd-e4b7-448b-a6d6-1b78e712ca24
      ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2 label: swapantiX
      uuid: f8726aca-2c62-4fe8-977e-51f136f2b63d
      Unmounted: Message: No unmounted partitions found.
      Sensors: System Temperatures: cpu: 48.8 C mobo: 0.0 C gpu: radeon temp: 45 C
      Fan Speeds (RPM): N/A
      Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
      1: deb http://ftp.cc.uoc.gr/mirrors/linux/mx/antix/buster buster main nonfree nosystemd
      Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
      1: deb http://deb.debian.org/debian buster-backports main contrib non-free
      Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
      1: deb http://ftp.gr.debian.org/debian/ buster-updates main contrib non-free
      Active apt repos in: /etc/apt/sources.list.d/debian.list
      1: deb http://ftp.gr.debian.org/debian/ buster main contrib non-free
      2: deb http://security.debian.org/ buster/updates main contrib non-free
      No active apt repos in: /etc/apt/sources.list.d/onion.list
      No active apt repos in: /etc/apt/sources.list.d/various.list
      Processes: CPU top: 5
      1: cpu: 3.8% command: xorg pid: 2797 mem: 54.8 MiB (0.3%)
      2: cpu: 1.0% command: sudo pid: 30889 mem: 3.71 MiB (0.0%)
      3: cpu: 0.8% command: leafpad pid: 29103 mem: 29.6 MiB (0.1%)
      4: cpu: 0.6% command: roxterm pid: 29171 mem: 29.0 MiB (0.1%)
      5: cpu: 0.4% command: conky pid: 3401 mem: 10.8 MiB (0.0%)
      Memory top: 5
      1: mem: 80.7 MiB (0.5%) command: apt-notifier.py started by: python pid: 3670 cpu: 0.0%
      2: mem: 54.8 MiB (0.3%) command: xorg pid: 2797 cpu: 3.8%
      3: mem: 45.5 MiB (0.2%) command: rox pid: 3316 cpu: 0.0%
      4: mem: 29.6 MiB (0.1%) command: leafpad pid: 29103 cpu: 0.8%
      5: mem: 29.0 MiB (0.1%) command: roxterm pid: 29171 cpu: 0.6%
      Info: Processes: 155 Uptime: 1h 18m Init: SysVinit v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8
      Shell: bash (sudo) v: 5.0.3 running in: roxterm inxi: 3.0.36

      #42296
      Forum Admin
      anticapitalista
        Helpful
        Up
        0
        ::

        Does the version in MX test repo (audacity_2.4.2~dfsg0-3) work ok? If so I can add that to our repo.

        Philosophers have interpreted the world in many ways; the point is to change it.

        antiX with runit - leaner and meaner.

        #42302
        Moderator
        caprea
          Helpful
          Up
          0
          ::

          Curious_from_country , you can download the MX-test-repo-version from here
          http://mxrepo.com/mx/testrepo/pool/test/a/audacity/

          You have to deinstall your old version before doing so.
          Download
          audacity_2.4.2~dfsg0-3~mx19+1_amd64.deb
          and
          audacity-data_2.4.2~dfsg0-3~mx19+1_all.deb

          and install the audacity-data first and then audacity
          with gdebi or apt

          I did and it installed fine, also the ‘Silence finder’ in menu “Analyze” is there, but I don’t know audacity good enough to say that it works absolutely problem-free.So it’s your turn.

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.