Can’t connect to WiFi on new Antix 19.2.1 Base Live USB

[Member anilkagi]

Hello there,

I just downloaded the Antix 19.2.1 Base and created the live USB with USBMaker-git on manjaro. It booted on my Laptop without problems. However I cannot connect to the Wifi.

The first time booted and configured on Ceni. I got the following error.

Ceni error;

Listening on LPF/wlan0/b4:74:9f:51:ab:06
Sending on   LPF/wlan0/b4:74:9f:51:ab:06
Sending on   Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
/bin/run-parts --exit-on-error --verbose /etc/network/if-up.d
run-parts: executing /etc/network/if-up.d/000resolvconf
run-parts: executing /etc/network/if-up.d/mountnfs
run-parts: executing /etc/network/if-up.d/wp

However when I tried to connect on the next day it is not even detecting the wireless interface.

The output of ‘ifconfig -a’ on the Manjaro system is as below.

$ ifconfig -a
enp4s0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether e8:11:32:2a:c2:e2  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp2s0b1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.43.163  netmask 255.255.255.0  broadcast 192.168.43.255
        ether b4:74:9f:51:ab:06  txqueuelen 1000  (Ethernet)
        RX packets 14522  bytes 13322155 (12.7 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 13115  bytes 2658078 (2.5 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Moreover, I can tether my phone with USB cable and connect to the internet, on the Live USB antix.

My system is a dual boot system with Windows and Manjaro on it. I can connect to WiFi on both.

Please help in this regard.

Thanks and Regards

• This topic was modified 2 years, 9 months ago by anilkagi.
• This topic was modified 2 years, 9 months ago by anilkagi.
• This topic was modified 2 years, 9 months ago by anilkagi.

[Moderator BobC]

Helpful

Up

0

::

See this thread also from yesterday. Trying to use Ceni is also possible, but its the hard way.

https://www.antixforum.com/forums/topic/is-antix-base-not-supposed-to-work-with-wifi/

• This reply was modified 2 years, 9 months ago by BobC.

[Member AR]

Helpful

Up

0

::

Please remove this my post.

• This reply was modified 2 years, 9 months ago by AR.

[Author]

Posts