- This topic has 9 replies, 3 voices, and was last updated Jun 14-6:34 pm by anticapitalista.
-
Posts
-
wildstar84
Attempting to upgrade fluidsynth to latest vsn is broken & has been for quite some time now, see below (and yes I need the -dev part!):
apt-get install libfluidsynth-dev:
The following packages have unmet dependencies:
libelogind0 : Conflicts: libsystemd0
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.Please help or fix. Thanks!
Jim
- This topic was modified 10 months, 4 weeks ago by anticapitalista. Reason: resolved
sybok
Hi, I run with testing repositories (system based on antiX-21) and I get a similar problem.
Could you please post your repositories (output of ‘inxi -r’)?
The ‘libfluidsynth-dev’ in bullseye (current stable) does not seem to be plagued by systemd-dependencies, see https://packages.debian.org/bullseye/libfluidsynth-dev .My attempt to install in antiX-testing (‘libfluidsynth3’ is already installed on my system):
sudo apt install libfluidsynth-dev
The output describing the issue ends with:
“The following packages have unmet dependencies:
libfluidsynth-dev : Depends: libsystemd-dev but it is not installable
E: Unable to correct problems, you have held broken packages.”
anticapitalista
nosystemd fixes to hit repos shortly.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - leaner and meaner.
wildstar84
**BUMP!** re “fixes to hit repos shortly”: This has still NOT been fixed (thru latest bookworm/testing v2.2.7-1)!
anticapitalista
Oh yes it has. This is a frugal testing install (32bit)
http://repo.antixlinux.com/testing/pool/nosystemd/f/fluidsynth/
apt install libfluidsynth-dev Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages were automatically installed and are no longer required: libdav1d5 libdns-export1110 libgck-1-0 libgcr-base-3-1 libgcr-ui-3-1 libisc-export1105 libjim0.79 Use 'apt autoremove' to remove them. The following additional packages will be installed: gir1.2-ibus-1.0 libdecor-0-dev libibus-1.0-5 libibus-1.0-dev libinstpatch-dev libpulse-dev libpulse-mainloop-glib0 libsdl2-dev libxxf86vm-dev The following NEW packages will be installed: gir1.2-ibus-1.0 libdecor-0-dev libfluidsynth-dev libibus-1.0-5 libibus-1.0-dev libinstpatch-dev libpulse-dev libpulse-mainloop-glib0 libsdl2-dev libxxf86vm-dev 0 upgraded, 10 newly installed, 0 to remove and 11 not upgraded. Need to get 2,519 kB of archives. After this operation, 11.2 MB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://debian.ipacct.com/debian testing/main i386 libinstpatch-dev i386 1.1.6-1 [71.6 kB] Get:2 http://debian.ipacct.com/debian testing/main i386 libdecor-0-dev i386 0.1.0-3 [6,168 B] Get:3 http://debian.ipacct.com/debian testing/main i386 libibus-1.0-5 i386 1.5.26-4 [426 kB] Get:4 http://debian.ipacct.com/debian testing/main i386 gir1.2-ibus-1.0 i386 1.5.26-4 [333 kB] Get:5 http://debian.ipacct.com/debian testing/main i386 libibus-1.0-dev i386 1.5.26-4 [450 kB] Get:6 http://debian.ipacct.com/debian testing/main i386 libxxf86vm-dev i386 1:1.1.4-1+b2 [26.3 kB] Get:7 http://debian.ipacct.com/debian testing/main i386 libsdl2-dev i386 2.0.22+dfsg-4 [988 kB] Get:8 http://repo.antixlinux.com/testing testing/nosystemd i386 libpulse-mainloop-glib0 i386 15.0+dfsg1-4.0nosystemd1 [45.0 kB] Get:9 http://repo.antixlinux.com/testing testing/nosystemd i386 libpulse-dev i386 15.0+dfsg1-4.0nosystemd1 [107 kB] Get:10 http://repo.antixlinux.com/testing testing/nosystemd i386 libfluidsynth-dev i386 2.2.7-1.0nosystemd1 [65.4 kB] Fetched 2,519 kB in 2s (1,029 kB/s) Selecting previously unselected package libinstpatch-dev:i386. (Reading database ... 240043 files and directories currently installed.) Preparing to unpack .../0-libinstpatch-dev_1.1.6-1_i386.deb ... Unpacking libinstpatch-dev:i386 (1.1.6-1) ... Selecting previously unselected package libpulse-mainloop-glib0:i386. Preparing to unpack .../1-libpulse-mainloop-glib0_15.0+dfsg1-4.0nosystemd1_i386.deb ... Unpacking libpulse-mainloop-glib0:i386 (15.0+dfsg1-4.0nosystemd1) ... Selecting previously unselected package libpulse-dev:i386. Preparing to unpack .../2-libpulse-dev_15.0+dfsg1-4.0nosystemd1_i386.deb ... Unpacking libpulse-dev:i386 (15.0+dfsg1-4.0nosystemd1) ... Selecting previously unselected package libdecor-0-dev:i386. Preparing to unpack .../3-libdecor-0-dev_0.1.0-3_i386.deb ... Unpacking libdecor-0-dev:i386 (0.1.0-3) ... Selecting previously unselected package libibus-1.0-5:i386. Preparing to unpack .../4-libibus-1.0-5_1.5.26-4_i386.deb ... Unpacking libibus-1.0-5:i386 (1.5.26-4) ... Selecting previously unselected package gir1.2-ibus-1.0:i386. Preparing to unpack .../5-gir1.2-ibus-1.0_1.5.26-4_i386.deb ... Unpacking gir1.2-ibus-1.0:i386 (1.5.26-4) ... Selecting previously unselected package libibus-1.0-dev:i386. Preparing to unpack .../6-libibus-1.0-dev_1.5.26-4_i386.deb ... Unpacking libibus-1.0-dev:i386 (1.5.26-4) ... Selecting previously unselected package libxxf86vm-dev:i386. Preparing to unpack .../7-libxxf86vm-dev_1%3a1.1.4-1+b2_i386.deb ... Unpacking libxxf86vm-dev:i386 (1:1.1.4-1+b2) ... Selecting previously unselected package libsdl2-dev:i386. Preparing to unpack .../8-libsdl2-dev_2.0.22+dfsg-4_i386.deb ... Unpacking libsdl2-dev:i386 (2.0.22+dfsg-4) ... Selecting previously unselected package libfluidsynth-dev:i386. Preparing to unpack .../9-libfluidsynth-dev_2.2.7-1.0nosystemd1_i386.deb ... Unpacking libfluidsynth-dev:i386 (2.2.7-1.0nosystemd1) ... Setting up libxxf86vm-dev:i386 (1:1.1.4-1+b2) ... Setting up libibus-1.0-5:i386 (1.5.26-4) ... Setting up libdecor-0-dev:i386 (0.1.0-3) ... Setting up libpulse-mainloop-glib0:i386 (15.0+dfsg1-4.0nosystemd1) ... Setting up libpulse-dev:i386 (15.0+dfsg1-4.0nosystemd1) ... Setting up libinstpatch-dev:i386 (1.1.6-1) ... Setting up gir1.2-ibus-1.0:i386 (1.5.26-4) ... Setting up libibus-1.0-dev:i386 (1.5.26-4) ... Setting up libsdl2-dev:i386 (2.0.22+dfsg-4) ... Setting up libfluidsynth-dev:i386 (2.2.7-1.0nosystemd1) ... Processing triggers for man-db (2.10.2-1) ... Processing triggers for libc-bin (2.33-7) ...- This reply was modified 11 months ago by anticapitalista.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - leaner and meaner.
wildstar84
Hmmm – looks like something must be wrong in my repo list, can you help me correct?:
#>inxi -r Repos: No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://la.mxrepo.com/antix/bullseye/ bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http://deb.debian.org/debian/ bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/buster-backports.list 1: deb http://deb.debian.org/debian/ testing main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.us.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.us.debian.org/debian/ testing main contrib non-free 2: deb http://security.debian.org/ testing-security main contrib non-free No active apt repos in: /etc/apt/sources.list.d/mx.list No active apt repos in: /etc/apt/sources.list.d/onion.list Active apt repos in: /etc/apt/sources.list.d/various.list 1: deb http://liquorix.net/debian/ testing main #>My current results (I have libelogind0 installed, not libsystemd0):
#>apt install libfluidsynth-dev Reading package lists... Done Building dependency tree... Done Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libelogind0 : Conflicts: libsystemd0 E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. #>Thanks!
Jim
- This reply was modified 11 months ago by wildstar84.
anticapitalista
If you are using testing, then make sure you have all testing repos enabled.
I see you do not have the antiX testing repo enabled at all.
You do not need bullseye repos.
Why do you have the buster repos enabled?Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - leaner and meaner.
wildstar84
Ok, that FIXED the issue w/fluidsynth (THANKS, Anti)! I think I’ve got this correct now?!: However, several of your other *0nosystemd1 packages (ie. links2, cups, etc.) are not upgradable due to the common pbm. of libssl3 (>= 3.0.0) is not (yet?) present!
Repos: No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://la.mxrepo.com/antix/testing/ testing main nosystemd nonfree No active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list No active apt repos in: /etc/apt/sources.list.d/buster-backports.list No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.us.debian.org/debian/ testing main contrib non-free 2: deb http://security.debian.org/ testing-security main contrib non-free No active apt repos in: /etc/apt/sources.list.d/mx.list No active apt repos in: /etc/apt/sources.list.d/onion.list Active apt repos in: /etc/apt/sources.list.d/various.list 1: deb http://liquorix.net/debian/ testing mainwildstar84
libssl3 has now shown up & the upgrades all seem to be working well now, so please mark this RESOLVED!
Thanks,
Jim
anticapitalista
Done!
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - leaner and meaner.
- You must be logged in to reply to this topic.
