Connman not connecting

Forum Forums News Announcements Connman not connecting

  • This topic has 2 replies, 3 voices, and was last updated Dec 22-1:31 pm by Anonymous.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #31005
    Forum Admin

    antiX-19 full and base ship with connman network manager.
    Some users have reported problems connecting either via the gui or cli.

    If this is the case, this may fix it.

    Edit /etc/sysctl.conf by commenting or removing these lines (as privileged user)

    net.ipv6.conf.all.disable_ipv6 = 1
    net.ipv6.conf.default.disable_ipv6 = 1
    net.ipv6.conf.lo.disable_ipv6 = 1

    You might need to reboot and then try connman gui again

    Philosophers have interpreted the world in many ways; the point is to change it.

    antiX with runit - leaner and meaner.


    i dont know if this helps other users but, i noticed that when i tether my phone via usb the ownership of /dev/bus/002/0xx are owner=root group=audio. after changing to owner=root group=root it is possible to connect to the net.


    Hi anticapitalista,
    Thanks for posting this. I tried commenting out those lines while running AntiX19 on live DVD 32 bit iso.
    I got the same errors as posted in the forum post called “I’m clueless…”
    Please let me know if you would like me to try anything else. In the meantime, I was able to get ceni working. Thanks for your help there.


    running live iso from DVD, I found that the /dev/bus/usb/ 001 and 002 both have owner=root and group=root permissions on my live DVD version.
    Hope this helps

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.