Control center and live persistence

[Member gelosoil]

Hi again anticapitalista and co,
I understand how to set persistence during booting time,but i was wondering if i could set it from inside the liveusb system,after booting.I see in the control panel the options but i havent found any videos that talk about them,only the relevant vids from dolphin that dont include any info for this option.
I assume (and i will try next ) that it is the same thing,but if not i d like some instructions for the use of those “buttons”in the cc.
I will set first the root and home persist.,then configure it to automatic ,and see how this goes.
I hope i dont have to make any edit on the grub file or anything,i suck on this..:):)

for yr ref i include my system details

System:    Host: antix1 Kernel: 4.14.14-antix.1-686-smp-pae i686 bits: 32 gcc: 6.3.0
           Desktop: IceWM 1.4.2 Distro: antiX-17_386-full Heather Heyer 24 October 2017
Machine:   Device: laptop System: TOSHIBA product: Satellite L500 v: PSLS0E-02P01HGE serial: N/A
           Mobo: TOSHIBA model: KSWAA v: 1.00 serial: N/A BIOS: TOSHIBA v: V1.80 date: 10/28/2009
Battery    BAT1: charge: 25.0 Wh 100.0% condition: 25.0/43.2 Wh (58%)
           model: TOSHIBA PA3534U-1BRS status: N/A
CPU:       Dual core Pentium T4300 (-MCP-) arch: Penryn rev.10 cache: 1024 KB
           flags: (lm nx pae sse sse2 sse3 ssse3) bmips: 8379
           clock speeds: max: 2100 MHz 1: 2094 MHz 2: 2094 MHz
Graphics:  Card: Intel Mobile 4 Series Integrated Graphics Controller bus-ID: 00:02.0
           Display Server: X.Org 1.19.2 drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1366x768@59.97hz
           OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2
           version: 2.1 Mesa 13.0.6 Direct Render: Yes
Audio:     Card Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k4.14.14-antix.1-686-smp-pae
Network:   Card-1: Realtek RTL8101/2/6E PCIE Fast/Gigabit Ethernet controller
           driver: r8169 v: 2.3LK-NAPI port: 3000 bus-ID: 0e:00.0
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
           Card-2: Realtek RTL8187B Wireless Adapter driver: rtl8187 usb-ID: 001-002
           IF: wlan0 state: N/A mac: N/A
Drives:    HDD Total Size: 328.1GB (0.0% used)
           ID-1: /dev/sda model: Hitachi_HTS54503 size: 320.1GB
           ID-2: USB /dev/sdb model: Cruzer_Blade size: 8.0GB
Partition: ID-1: / size: 3.1G used: 715M (24%) fs: overlay dev: N/A
Sensors:   System Temperatures: cpu: 43.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 116 Uptime: 24 min Memory: 407.5/3881.6MB
           Init: SysVinit runlevel: 5 Gcc sys: 6.3.0 Client: Shell wrapper inxi: 2.3.54
Partition: ID-1: / size: 3.1G used: 719M (24%) fs: overlay dev: /dev/overlay label: N/A uuid: N/A
           ID-2: /media/antiX-uefi size: 50M used: 12M (24%) fs: vfat dev: /dev/sdb2
           label: antiX-uefi uuid: 49D7-0C3C

[Forum Admin dolphin_oracle]

Helpful

Up

0

::

you can set it up that way, but it won’t go into effect until you reboot anyway, so I suggest just using the persist options at boot.

I’m also not sure that without persistence if the “automatic” save will be stored or not.

[Author]

Posts