Emachine 3507 Wireless shop desktop computer

Forum Forums General Hardware Emachine 3507 Wireless shop desktop computer

Tagged: 

  • This topic has 4 replies, 1 voice, and was last updated Dec 22-5:15 pm by rokytnji.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #4114
    Forum Admin
    rokytnji

    Specs:

    harry@biker:~
    $ inxi -zv7
    System:    Host: biker Kernel: 4.10.5-antix.3-amd64-smp x86_64 bits: 64 gcc: 6.3.0 Desktop: IceWM 1.4.2 dm: slim
               Distro: antiX-17_x64-full Heather Heyer 24 October 2017
    Machine:   Device: desktop System: GATEWAY product: W3507 v: 500 serial: N/A
               Mobo: Intel model: D102GGC2 v: AAD70214-201 serial: N/A
               BIOS: Intel v: GC11020M.15A.2010.2006.0817.0956 date: 08/17/2006
    CPU:       Single core Intel Celeron D (-UP-) arch: Netburst Prescott rev.4 cache: 512 KB
               flags: (lm nx sse sse2 sse3) bmips: 6402 speed: 3200 MHz (max)
    Memory:    Using dmidecode: root required for dmidecode
    Graphics:  Card: Advanced Micro Devices [AMD/ATI] RC410 [Radeon Xpress 200/1100]
               bus-ID: 01:05.0 chip-ID: 1002:5a61
               Display Server: X.Org 1.19.2 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
               Resolution: 1024x768@85.00hz
               OpenGL: renderer: Gallium 0.4 on ATI RC410 version: 2.1 Mesa 13.0.6 Direct Render: Yes
    Audio:     Card Advanced Micro Devices [AMD/ATI] IXP SB4x0 High Definition Audio Controller
               driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1002:437b
               Sound: Advanced Linux Sound Architecture v: k4.10.5-antix.3-amd64-smp
    Network:   Card-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
               driver: 8139too v: 0.9.28 port: 1000 bus-ID: 02:02.0 chip-ID: 10ec:8139
               IF: eth0 state: down mac: <filter>
               Card-2: Realtek RTL8191SU 802.11n WLAN Adapter driver: r8712u usb-ID: 001-004 chip-ID: 0bda:8172
               IF: wlx000f13651532 state: N/A mac: N/A
               WAN IP: <filter>
               IF: wlx000f13651532 ip-v4: <filter> ip-v6-link: <filter>
               IF: eth0 ip-v4: N/A ip-v6-link: N/A
    Drives:    HDD Total Size: 120.0GB (4.6% used)
               ID-1: /dev/sda model: ST3120213A size: 120.0GB serial: <filter>
               Optical-1: /dev/sr0 model: HL-DT-ST DVD+-RW GSA-H21N rev: 1.00 dev-links: cdrom
               Features: speed: 48x multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running
    Partition: ID-1: / size: 9.1G used: 3.2G (37%) fs: ext4 dev: /dev/sda1
               label: rootantiX uuid: f24d6c06-3863-431a-8847-3c885138da54
               ID-2: /home size: 31G used: 100M (1%) fs: ext4 dev: /dev/sda3
               label: homeantiX uuid: f5fc9e9e-2b64-4838-adec-616da3cecf2b
               ID-3: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
               label: N/A uuid: a55f5477-b77d-4e07-b34a-d0260ad85959
    RAID:      No RAID data: /proc/mdstat missing-is md_mod kernel module loaded?
    Unmounted: ID-1: /dev/sda4 size: 74.92G label: /data1 uuid: 284c1657-3c0b-484c-ad41-a90908a993fd
    Sensors:   None detected - is lm-sensors installed and configured?
    Info:      Processes: 155 Uptime: 31 min Memory: 577.3/1874.7MB
               Init: SysVinit v: 2.88 runlevel: 5 default: 5 Gcc sys: 6.3.0
               Client: Shell (bash 4.4.121 running in lxterminal) inxi: 2.3.53 
    harry@biker:~
    $ sudo parted -l
    [sudo] password for harry: 
    Model: ATA ST3120213A (scsi)
    Disk /dev/sda: 120GB
    Sector size (logical/physical): 512B/512B
    Partition Table: msdos
    Disk Flags: 
    
    Number  Start   End     Size    Type     File system     Flags
     1      1049kB  9902MB  9901MB  primary  ext4            boot
     3      9902MB  42.9GB  33.0GB  primary  ext4
     4      42.9GB  118GB   74.9GB  primary  ext4
     2      118GB   120GB   2174MB  primary  linux-swap(v1)
    
    harry@biker:~
    $ sudo blkid
    /dev/sda1: LABEL="rootantiX" UUID="f24d6c06-3863-431a-8847-3c885138da54" TYPE="ext4" PARTUUID="000bda1f-01"
    /dev/sda2: UUID="a55f5477-b77d-4e07-b34a-d0260ad85959" TYPE="swap" PARTUUID="000bda1f-02"
    /dev/sda3: LABEL="homeantiX" UUID="f5fc9e9e-2b64-4838-adec-616da3cecf2b" TYPE="ext4" PARTUUID="000bda1f-03"
    /dev/sda4: LABEL="/data1" UUID="284c1657-3c0b-484c-ad41-a90908a993fd" TYPE="ext4" PARTUUID="000bda1f-04"
    

    Wireless name being weird again. I expect it to settle down after shutdown and reboot tomorrow.

    eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
    <snip>
    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
    <snip>
    wlx000f13651532: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
    

    Install is done. Dist-Upgrade below for those that care. This is just the beginning. I will be testing media reader later on. That is all for today. At least wireless works excellent. 100% signal strength at 150MB per second speed. I won’t be touching conky till things settle down. I made that mistake on my netbook install and had to change things back around to wlan0 after wireless name settled down. So far so good.

    Edit: side note. This computer was pulled out of a dumpster. It was infested with malware and viruses in Windows and was a throw away. It is now my shop playtoy and media center.

    • This topic was modified 3 years, 11 months ago by rokytnji.
    Attachments:

    Sometimes I drive a crooked road to get my mind straight.
    Not all who Wander are Lost.
    I'm not outa place. I'm from outer space.

    Linux Registered User # 475019
    How to Search for AntiX solutions to your problems

    #4118
    Forum Admin
    rokytnji
    Helpful
    Up
    0
    ::

    1st test. USB slot on media card center on front of desktop. Works fine and dandy.

    harry@biker:~
    $ sudo dmesg | tail
    [ 3136.670656] scsi 7:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  4.05 PQ: 0 ANSI: 2
    [ 3136.676634] sd 7:0:0:0: Attached scsi generic sg6 type 0
    [ 3136.677151] sd 7:0:0:0: [sdf] 4013709 512-byte logical blocks: (2.06 GB/1.91 GiB)
    [ 3136.677797] sd 7:0:0:0: [sdf] Write Protect is off
    [ 3136.677801] sd 7:0:0:0: [sdf] Mode Sense: 03 00 00 00
    [ 3136.678547] sd 7:0:0:0: [sdf] No Caching mode page found
    [ 3136.678558] sd 7:0:0:0: [sdf] Assuming drive cache: write through
    [ 3136.687850]  sdf: sdf1 sdf2
    [ 3136.690785] sd 7:0:0:0: [sdf] Attached SCSI removable disk
    [ 3137.279323] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
    

    screenshot

    Edit: 2nd test. SD card slot light comes on when card is inserted. But does not mount and open rox file manager. So time for some troubleshooting.

    [ 3136.676634] sd 7:0:0:0: Attached scsi generic sg6 type 0
    [ 3136.677151] sd 7:0:0:0: [sdf] 4013709 512-byte logical blocks: (2.06 GB/1.91 GiB)
    [ 3136.677797] sd 7:0:0:0: [sdf] Write Protect is off
    [ 3136.677801] sd 7:0:0:0: [sdf] Mode Sense: 03 00 00 00
    [ 3136.678547] sd 7:0:0:0: [sdf] No Caching mode page found
    [ 3136.678558] sd 7:0:0:0: [sdf] Assuming drive cache: write through
    [ 3136.687850]  sdf: sdf1 sdf2
    [ 3136.690785] sd 7:0:0:0: [sdf] Attached SCSI removable disk
    [ 3137.279323] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
    [ 3533.519157] usb 1-8: USB disconnect, device number 6
    

    Third edit: Test done while inserting sd card in slot before/during booting from grub menu.

    $ sudo dmesg | tail
    [  230.451222] udevd[381]: worker [2282] terminated by signal 9 (Killed)
    [  230.451234] udevd[381]: worker [2282] failed while handling '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde'
    [  230.462322] udevd[381]: worker [2283] terminated by signal 9 (Killed)
    [  230.462333] udevd[381]: worker [2283] failed while handling '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf'
    [  260.483370] udevd[381]: worker [2281] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc is taking a long time
    [  262.646674] usb 2-4: reset full-speed USB device number 2 using ohci-pci
    [  293.829438] udevd[381]: worker [3713] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf is taking a long time
    [  293.829457] udevd[381]: worker [3665] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:1/block/sdd is taking a long time
    [  293.829464] udevd[381]: worker [3666] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde is taking a long time
    [  295.073332] usb 2-4: reset full-speed USB device number 2 using ohci-pci
    
    harry@biker:~
    $ sudo dmesg | grep udevd
    [    4.033748] udevd[143]: starting version 3.2
    [    4.034296] random: udevd: uninitialized urandom read (16 bytes read)
    [    4.034355] random: udevd: uninitialized urandom read (16 bytes read)
    [    4.040632] udevd[144]: starting eudev-3.2
    [    4.068661] random: udevd: uninitialized urandom read (16 bytes read)
    [   10.399436] udevd[380]: starting version 3.2
    [   10.861446] udevd[381]: starting eudev-3.2
    [  100.049845] udevd[381]: worker [2280] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:1/block/sdd is taking a long time
    [  100.049862] udevd[381]: worker [2282] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde is taking a long time
    [  100.049868] udevd[381]: worker [2283] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf is taking a long time
    [  219.019874] udevd[381]: worker [2280] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:1/block/sdd timeout; kill it
    [  219.019907] udevd[381]: seq 1854 '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:1/block/sdd' killed
    [  219.019915] udevd[381]: worker [2282] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde timeout; kill it
    [  219.019926] udevd[381]: seq 1856 '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde' killed
    [  219.019934] udevd[381]: worker [2283] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf timeout; kill it
    [  219.019945] udevd[381]: seq 1858 '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf' killed
    [  230.440654] udevd[381]: worker [2280] terminated by signal 9 (Killed)
    [  230.440664] udevd[381]: worker [2280] failed while handling '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:1/block/sdd'
    [  230.451222] udevd[381]: worker [2282] terminated by signal 9 (Killed)
    [  230.451234] udevd[381]: worker [2282] failed while handling '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde'
    [  230.462322] udevd[381]: worker [2283] terminated by signal 9 (Killed)
    [  230.462333] udevd[381]: worker [2283] failed while handling '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf'
    [  260.483370] udevd[381]: worker [2281] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc is taking a long time
    [  293.829438] udevd[381]: worker [3713] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf is taking a long time
    [  293.829457] udevd[381]: worker [3665] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:1/block/sdd is taking a long time
    [  293.829464] udevd[381]: worker [3666] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde is taking a long time
    [  378.750036] udevd[381]: worker [2281] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc timeout; kill it
    [  378.750082] udevd[381]: seq 1863 '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc' killed
    [  395.279284] udevd[381]: worker [2281] terminated by signal 9 (Killed)
    [  395.279294] udevd[381]: worker [2281] failed while handling '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc'

    4th edit: removing and re-inserting sd card while running changes nothing in uded report

    
    $ sudo dmesg | grep udevd
    [    4.033748] udevd[143]: starting version 3.2
    [    4.034296] random: udevd: uninitialized urandom read (16 bytes read)
    [    4.034355] random: udevd: uninitialized urandom read (16 bytes read)
    [    4.040632] udevd[144]: starting eudev-3.2
    [    4.068661] random: udevd: uninitialized urandom read (16 bytes read)
    [   10.399436] udevd[380]: starting version 3.2
    [   10.861446] udevd[381]: starting eudev-3.2
    [  100.049845] udevd[381]: worker [2280] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:1/block/sdd is taking a long time
    [  100.049862] udevd[381]: worker [2282] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde is taking a long time
    [  100.049868] udevd[381]: worker [2283] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf is taking a long time
    [  219.019874] udevd[381]: worker [2280] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:1/block/sdd timeout; kill it
    [  219.019907] udevd[381]: seq 1854 '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:1/block/sdd' killed
    [  219.019915] udevd[381]: worker [2282] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde timeout; kill it
    [  219.019926] udevd[381]: seq 1856 '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde' killed
    [  219.019934] udevd[381]: worker [2283] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf timeout; kill it
    [  219.019945] udevd[381]: seq 1858 '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf' killed
    [  230.440654] udevd[381]: worker [2280] terminated by signal 9 (Killed)
    [  230.440664] udevd[381]: worker [2280] failed while handling '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:1/block/sdd'
    [  230.451222] udevd[381]: worker [2282] terminated by signal 9 (Killed)
    [  230.451234] udevd[381]: worker [2282] failed while handling '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde'
    [  230.462322] udevd[381]: worker [2283] terminated by signal 9 (Killed)
    [  230.462333] udevd[381]: worker [2283] failed while handling '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf'
    [  260.483370] udevd[381]: worker [2281] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc is taking a long time
    [  293.829438] udevd[381]: worker [3713] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:3/block/sdf is taking a long time
    [  293.829457] udevd[381]: worker [3665] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:1/block/sdd is taking a long time
    [  293.829464] udevd[381]: worker [3666] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:2/block/sde is taking a long time
    [  378.750036] udevd[381]: worker [2281] /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc timeout; kill it
    [  378.750082] udevd[381]: seq 1863 '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc' killed
    [  395.279284] udevd[381]: worker [2281] terminated by signal 9 (Killed)
    [  395.279294] udevd[381]: worker [2281] failed while handling '/devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc'

    Calling it a day for now. Sigh. code tags suck.

    harry@biker:~
    $ sudo mount
    sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
    proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
    udev on /dev type devtmpfs (rw,nosuid,relatime,size=946828k,nr_inodes=236707,mode=755)
    devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
    tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=191972k,mode=755)
    /dev/sda1 on / type ext4 (rw,relatime,data=ordered)
    tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
    pstore on /sys/fs/pstore type pstore (rw,relatime)
    tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=808480k)
    /dev/sda3 on /home type ext4 (rw,relatime,data=ordered)
    rpc_pipefs on /run/rpc_pipefs type rpc_pipefs (rw,relatime)
    
    • This reply was modified 3 years, 11 months ago by rokytnji.
    • This reply was modified 3 years, 11 months ago by rokytnji.
    • This reply was modified 3 years, 11 months ago by rokytnji.

    Sometimes I drive a crooked road to get my mind straight.
    Not all who Wander are Lost.
    I'm not outa place. I'm from outer space.

    Linux Registered User # 475019
    How to Search for AntiX solutions to your problems

    #4176
    Forum Admin
    rokytnji
    Helpful
    Up
    0
    ::

    Next troubleshooting step. Adding a MX 17 kernel image and header.

    https://forum.mxlinux.org/viewtopic.php?f=40&p=430402#p430402

    1st check is my pendrive.

    harry@biker:~
    $ sudo dmesg | grep udevd
    [    2.983986] udevd[67]: starting version 3.2
    [    2.988456] udevd[68]: starting eudev-3.2
    [    9.410095] udevd[343]: starting version 3.2
    [    9.880858] udevd[344]: starting eudev-3.2
    harry@biker:~
    $ sudo dmesg | tail
    [  417.574156] scsi host7: usb-storage 1-8:1.0
    [  418.579850] scsi 7:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  4.05 PQ: 0 ANSI: 2
    [  418.584204] sd 7:0:0:0: [sdg] 4013709 512-byte logical blocks: (2.06 GB/1.91 GiB)
    [  418.584994] sd 7:0:0:0: [sdg] Write Protect is off
    [  418.584999] sd 7:0:0:0: [sdg] Mode Sense: 03 00 00 00
    [  418.585991] sd 7:0:0:0: [sdg] No Caching mode page found
    [  418.586002] sd 7:0:0:0: [sdg] Assuming drive cache: write through
    [  418.595181]  sdg: sdg1
    [  418.599370] sd 7:0:0:0: [sdg] Attached SCSI removable disk
    [  419.294314] EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null)
    harry@biker:~
    $ inxi -S
    System:    Host: biker Kernel: 4.13.0-1-amd64 x86_64 bits: 64 Desktop: IceWM 1.4.2
               Distro: antiX-17_x64-full Heather Heyer 24 October 2017
    

    Mounts OK.
    Next is sd card. For testing purposes. I will try a different brand/model sd card this time. A Kingston.

    No mounting

    harry@biker:~
    $ sudo dmesg | tail
    [  418.579850] scsi 7:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  4.05 PQ: 0 ANSI: 2
    [  418.584204] sd 7:0:0:0: [sdg] 4013709 512-byte logical blocks: (2.06 GB/1.91 GiB)
    [  418.584994] sd 7:0:0:0: [sdg] Write Protect is off
    [  418.584999] sd 7:0:0:0: [sdg] Mode Sense: 03 00 00 00
    [  418.585991] sd 7:0:0:0: [sdg] No Caching mode page found
    [  418.586002] sd 7:0:0:0: [sdg] Assuming drive cache: write through
    [  418.595181]  sdg: sdg1
    [  418.599370] sd 7:0:0:0: [sdg] Attached SCSI removable disk
    [  419.294314] EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null)
    [  925.208475] usb 1-8: USB disconnect, device number 6
    harry@biker:~
    $ sudo dmesg | grep udevd
    [    2.983986] udevd[67]: starting version 3.2
    [    2.988456] udevd[68]: starting eudev-3.2
    [    9.410095] udevd[343]: starting version 3.2
    [    9.880858] udevd[344]: starting eudev-3.2
    

    [/url]

    Back to the drawing board. I guess change of kernel to MX 17 stretch version was a washout also.

    Just for info. I documented error messages during the MX kernel install.

    I: /vmlinuz.old is now a symlink to boot/vmlinuz-4.10.5-antix.3-amd64-smp
    I: /initrd.img.old is now a symlink to boot/initrd.img-4.10.5-antix.3-amd64-smp
    I: /vmlinuz is now a symlink to boot/vmlinuz-4.13.0-1-amd64
    I: /initrd.img is now a symlink to boot/initrd.img-4.13.0-1-amd64
    /etc/kernel/postinst.d/dkms:
    
    Warning: Unable to find an initial ram disk that I know how to handle.
    Will not try to make an initrd.
    
    /etc/kernel/postinst.d/initramfs-tools:
    update-initramfs: Generating /boot/initrd.img-4.13.0-1-amd64
    I: The initramfs will attempt to resume from /dev/sda2
    I: (UUID=a55f5477-b77d-4e07-b34a-d0260ad85959)
    I: Set the RESUME variable to override this.
    /etc/kernel/postinst.d/zz-update-grub:
    Generating grub configuration file ...
    Found background: /usr/share/wallpaper/back.jpg
    Found background image: /usr/share/wallpaper/back.jpg
    Found linux image: /boot/vmlinuz-4.13.0-1-amd64
    Found initrd image: /boot/initrd.img-4.13.0-1-amd64
    Found linux image: /boot/vmlinuz-4.10.5-antix.3-amd64-smp
    Found initrd image: /boot/initrd.img-4.10.5-antix.3-amd64-smp
    Found memtest86+ image: /boot/memtest86+.bin
    done
    Setting up linux-kbuild-4.13 (4.13.13-1mx17) ...
    Setting up linux-compiler-gcc-6-x86 (4.13.13-1mx17) ...
    Setting up linux-headers-4.13.0-1-common (4.13.13-1mx17) ...
    Setting up linux-headers-4.13.0-1-amd64 (4.13.13-1mx17) 

    Got a key error also during apt-get update after enabling just the MX stable reo. I did not enable/uncomment out,the cr testing repo for this kernel installation.

    harry@biker:~
    $ cat /etc/apt/sources.list.d/mx.list
    # deb http://mxrepo.com/mx/repo/ stretch non-free main  
    
    # deb http://mxrepo.com/mx/testrepo/ stretch test 
    

    Cold front coming out tomorrow for a few days. It will be too cold in the shop to pick up on this right away.

    Over and out. Rok.

    Sometimes I drive a crooked road to get my mind straight.
    Not all who Wander are Lost.
    I'm not outa place. I'm from outer space.

    Linux Registered User # 475019
    How to Search for AntiX solutions to your problems

    #4187
    Forum Admin
    rokytnji
    Helpful
    Up
    0
    ::

    Starting to think my media reader is busted. I tried AntiX 17 32 bit iso next. Same behavior.
    Then to check even more.

    harry@biker:~
    $ inxi -Fxz
    System:    Host: biker Kernel: 4.13.0-1-amd64 x86_64 bits: 64 gcc: 6.3.0
               Desktop: Xfce 4.12.3 (Gtk 2.24.31) Distro: MX-17_x64 Horizon December 15, 2017
    Machine:   Device: desktop System: GATEWAY product: W3507 v: 500 serial: N/A
               Mobo: Intel model: D102GGC2 v: AAD70214-201 serial: N/A
               BIOS: Intel v: GC11020M.15A.2010.2006.0817.0956 date: 08/17/2006
    CPU:       Single core Intel Celeron D (-UP-) arch: Netburst Prescott rev.4 cache: 512 KB
               flags: (lm nx sse sse2 sse3) bmips: 6400 speed: 3200 MHz (max)
    Graphics:  Card: Advanced Micro Devices [AMD/ATI] RC410 [Radeon Xpress 200/1100] bus-ID: 01:05.0
               Display Server: x11 (X.Org 1.19.2 )
               drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
               Resolution: 1024x768@85.00hz
               OpenGL: renderer: Gallium 0.4 on ATI RC410 version: 2.1 Mesa 13.0.6 Direct Render: Yes
    Audio:     Card Advanced Micro Devices [AMD/ATI] IXP SB4x0 High Def. Audio Controller
               driver: snd_hda_intel bus-ID: 00:14.2
               Sound: Advanced Linux Sound Architecture v: k4.13.0-1-amd64
    Network:   Card-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
               driver: 8139too v: 0.9.28 port: 1000 bus-ID: 02:02.0
               IF: eth0 state: down mac: <filter>
               Card-2: Realtek RTL8191SU 802.11n WLAN Adapter driver: r8712u usb-ID: 001-004
               IF: wlan0 state: N/A mac: N/A
    Drives:    HDD Total Size: 444.0GB (21.8% used)
               ID-1: /dev/sda model: ST3120213A size: 120.0GB
               ID-2: /dev/sdb model: Maxtor_5A320J0 size: 323.9GB
    Partition: ID-1: / size: 9.1G used: 4.6G (54%) fs: ext4 dev: /dev/sda1
               ID-2: /home size: 31G used: 121M (1%) fs: ext4 dev: /dev/sda3
               ID-3: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
    Sensors:   None detected - is lm-sensors installed and configured?
    Info:      Processes: 173 Uptime: 41 min Memory: 946.6/1875.6MB
               Init: SysVinit runlevel: 5 Gcc sys: 6.3.0 Client: Shell (bash 4.4.121) inxi: 2.3.53 
    harry@biker:~
    

    Which is MX 17 64 bit . Light comes on on the media sd slot. But same behaivior in Thunar file manager and the mount command does not see it. Gparted does not also. So probably a busted hardware issue. parted -l don’t see the card either. Electronics busted crap can be a headache. This desktop came out of a dumpster. So no harm, no foul.

    My IBM thinkcentre media reader which works, picks up all slots OK in MX 16. So I guess the usb port is all that is good on this front face of this Emachine media reader any more. So I am giving up and will just roll what I got going now on here. Because biker projects were on hold for this computer.

    sudo lshw
    <snip>
      *-disk:0
                 description: SCSI Disk
                 product: USB SD Reader
                 vendor: Generic
                 physical id: 0.0.0
                 bus info: scsi@6:0.0.0
                 logical name: /dev/sdc
                 version: 1.00
                 capabilities: removable
                 configuration: logicalsectorsize=512 sectorsize=512
               *-medium
                    physical id: 0
                    logical name: /dev/sdc
            *-disk:1
                 description: SCSI Disk
                 product: USB CF Reader
                 vendor: Generic
                 physical id: 0.0.1
                 bus info: scsi@6:0.0.1
                 logical name: /dev/sdd
                 version: 1.01
                 capabilities: removable
                 configuration: logicalsectorsize=512 sectorsize=512
               *-medium
                    physical id: 0
                    logical name: /dev/sdd
            *-disk:2
                 description: SCSI Disk
                 product: USB SM Reader
                 vendor: Generic
                 physical id: 0.0.2
                 bus info: scsi@6:0.0.2
                 logical name: /dev/sde
                 version: 1.02
                 capabilities: removable
                 configuration: logicalsectorsize=512 sectorsize=512
               *-medium
                    physical id: 0
                    logical name: /dev/sde
            *-disk:3
                 description: SCSI Disk
                 product: USB MS Reader
                 vendor: Generic
                 physical id: 0.0.3
                 bus info: scsi@6:0.0.3
                 logical name: /dev/sdf
                 version: 1.03
                 capabilities: removable
                 configuration: logicalsectorsize=512 sectorsize=512
               *-medium
                    physical id: 0
                    logical name: /dev/sdf
    

    I think just because lshw sees it. Does not mean it is function-able. If anyone has any ideas? I am all ears.

    I seem to have covered a lot of bases. I guess a fluxbox Salix Slackware or some puppy install may work, or not. I am perplexed and tired. Not pissed. No deal breakers here.

    Sometimes I drive a crooked road to get my mind straight.
    Not all who Wander are Lost.
    I'm not outa place. I'm from outer space.

    Linux Registered User # 475019
    How to Search for AntiX solutions to your problems

    #4225
    Forum Admin
    rokytnji
    Helpful
    Up
    0
    ::

    Funny observation/behavior experienced only by me I guess. Md5sums are always religiously done by me on all down loaded isos.

    On AntiX 17 32 bit and 64 bit isos.

    When adding 1 by editing grub entry with “e” key so I can play with smxi in AntiX.

    My “m” becomes a “n” key while out of X . I even swapped keyboards with no change. The “n” stays the “n” key
    So it is like having 2 “n” keys. Upper case “M” works OK. Of course. sMxi is not executable. Renaming it would probably not fix it either. Since smxi is called though the text file and renaming it would break that.

    This above behavior also shows up when Ctrl>Alt>F1 is done to drop out of Icewm also to run smxi.

    While in Icewm. the “m” key works OK. Calling on smxi in LXterminal while in Icewm will not shut down my desktop either when I select that option in terminal.
    But it types in OK and act like it is going to do something in terminal. Until it errors out.

    Like I mention. Weird stuff. With good md5sum checked isos. I must be in bad spot of the universe, I guess.

    Edit: Before anyone says they cannot reproduce this behavior. Hell. I cannot either on my AntiX 17 netbook install.
    Seems to be a Emachine/Gateway only hardware thing.

    • This reply was modified 3 years, 11 months ago by rokytnji.

    Sometimes I drive a crooked road to get my mind straight.
    Not all who Wander are Lost.
    I'm not outa place. I'm from outer space.

    Linux Registered User # 475019
    How to Search for AntiX solutions to your problems

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.