eudev testers needed

Forum Forums antiX-development Development eudev testers needed

  • This topic has 17 replies, 10 voices, and was last updated Feb 23-9:34 am by caprea.
Viewing 3 posts - 16 through 18 (of 18 total)
  • Author
    Posts
  • #6696
    Member
    sleekmasonsleekmason

    No problems updating here.

    System:   Host: ai Kernel: 4.15.3-antix.1-amd64-smp x86_64 bits: 64 gcc: 7.3.0
               Desktop: Fluxbox 1.3.5
               Distro: antiX-17_x64-full Heather Heyer 24 October 2017
    Machine:   Device: portable System: Dell product: Studio 1737 v: A07 serial: N/A
               Mobo: Dell model: 0P792H v: A07 serial: N/A
               BIOS: Dell v: A07 date: 08/06/2009
    Battery    BAT0: charge: 5.6 Wh 85.3% condition: 6.6/7.8 Wh (84%)
               model: SDI Dell status: Discharging
    CPU:       Dual core Pentium T4300 (-MCP-) arch: Penryn rev.10 cache: 1024 KB
               flags: (lm nx sse sse2 sse3 ssse3) bmips: 8379
               clock speeds: max: 2100 MHz 1: 2094 MHz 2: 2094 MHz
    Graphics:  Card: Intel Mobile 4 Series Integrated Graphics Controller bus-ID: 00:02.0
               Display Server: X.Org 1.19.6 driver: intel Resolution: 1440x900@60.06hz
               OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express
               version: 2.1 Mesa 17.3.3 Direct Render: Yes
    Audio:     Card Intel 82801I (ICH9 Family) HD Audio Controller
               driver: snd_hda_intel bus-ID: 00:1b.0
               Sound: Advanced Linux Sound Architecture v: k4.15.3-antix.1-amd64-smp
    Network:   Card-1: Broadcom Limited BCM4312 802.11b/g LP-PHY driver: wl bus-ID: 04:00.0
               IF: wlan0 state: up mac: <filter>
               Card-2: Broadcom Limited NetLink BCM5784M Gigabit Ethernet PCIe
               driver: tg3 v: 3.137 bus-ID: 08:00.0
               IF: eth0 state: down mac: <filter>
    Drives:    HDD Total Size: 160.0GB (5.9% used)
               ID-1: /dev/sda model: ST9160314AS size: 160.0GB
    Partition: ID-1: / size: 11G used: 6.0G (62%) fs: ext4 dev: /dev/sda1
               ID-2: /home size: 125G used: 925M (1%) fs: ext4 dev: /dev/sda3
               ID-3: swap-1 size: 2.08GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
    Sensors:   System Temperatures: cpu: 47.0C mobo: 37.0C
               Fan Speeds (in rpm): cpu: N/A fan-2: 2882 fan-3: 2882
    Info:      Processes: 138 Uptime: 10 min Memory: 462.7/1956.7MB
               Init: SysVinit runlevel: 5 Gcc sys: 7.3.0
               Client: Shell (bash 4.4.181) inxi: 2.3.54 
    #6775
    Member
    capreacaprea

    A bit late but still I today installed the rebuilt eudev packages.
    It went smoothly and no problems here.Now testing devices.

    #6896
    Member
    capreacaprea

    First impression:

    Runs nicely

    Couldn’t find anything that did not work.
    Finally installed an old driver for an old wacom graphic tablet with a serial connection, which fortunately still works with the 4.15-kernels
    https://ubuntuforums.org/showthread.php?t=1780154
    This also workes flawlessly

    Only problem I see, if you copy and paste a command like this
    sudo apt-get install build-essential libx11-dev libxi-dev x11proto-input-dev xserver-xorg-dev libxrandr-dev libncurses5-dev xutils-dev autoconf libtool pkg-config libudev-dev

    you will get the message (free translated)
    The following packages have unmet depencies:
    libudev-dev : depends on :libeudev-dev which will not get installed
    Problems can’t be corrected, you have held broken packages

    It doesn’t matter if libeudev-dev is already installed or not.
    So at this moment you have to be very well aware of the fact you are using a system with eudev, to know what you have to do.
    Maybe a problem for beginners.
    But this problem also already exists for the systemd-comands out in the www.

    Thank you for the great work !

Viewing 3 posts - 16 through 18 (of 18 total)
  • You must be logged in to reply to this topic.