Firewall (Solved)

Forum › Forums › Official Releases › antiX-19 “Marielle Franco, Hannie Schaft, Manolis Glezos, Grup Yorum, Wobblies” › Firewall (Solved)

  • This topic has 3 replies, 2 voices, and was last updated Dec 25-5:03 am by Noman01.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 24, 2019 at 5:16 pm #31116
    Member
    Noman01

      Just installed antiX 19.1 works great until I enable the firewall then I can’t access the internet, I’ve looked at the posts in the forums and to be honest most of it is over my head. If someone could break it down into simpler terms that would be great or do I even need the firewall at all.

      Thanks.

      • This topic was modified 3 years, 4 months ago by Noman01.
      December 25, 2019 at 2:26 am #31125
      Forum Admin
      anticapitalista
        Helpful
        Up
        0
        ::

        NB: It seems that there is still an issue with 4.9 kernels and ufw.
        If you need to use ufw, upgrade kernel to 4.19.83 or 5.2.21

        https://www.antixforum.com/forums/topic/new-kernels-available-3/

        Philosophers have interpreted the world in many ways; the point is to change it.

        antiX with runit - leaner and meaner.

        December 25, 2019 at 4:34 am #31129
        Member
        Noman01
          Helpful
          Up
          0
          ::

          Thanks for the quick response, when the new update came out I update to 4.9.200 on 17.4 (32bit)and had no problems. 19.1 (32bit) has the same kernel built in already so I thought we’re good to go, no problem will update as advised. Again thanks for the quick response.

          December 25, 2019 at 5:03 am #31132
          Member
          Noman01
            Helpful
            Up
            0
            ::

            Just installed 4.19.83 seems to have solved the problem, Thanks.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.