Hello,

Forum Forums New users Welcome to antiX Hello,

  • This topic has 9 replies, 5 voices, and was last updated Jul 25-6:01 pm by seaken64.
Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #63345
    Member
    arm45

    Greetings to everyone.

    As systemd irks me I’ve been looking into systemd-free Linux variants and found my way here.

    Antix looks lean; I like lean.

    Now I’m looking into why Flashpeak’s Slimjet has no sound, I see strange things apparently involved in that.

    • This topic was modified 5 days, 1 hour ago by arm45.
    #63351
    Member
    marcelocripe
    Helpful
    Up
    0

    Hello arm45,

    Welcome to antiX Linux and the forum.

    I don’t know how to write in English, so I send you my texts translated by the internet translator, I hope you can understand everything.

    Regardless of your level of knowledge about GNU/Linux, I recommend you read these excellent tutorials created by @PPC:

    Short essential how-to list for the complete Linux newbie and How-to install applications – 2020 version.

    So that people can help you, please open a terminal window apply the command:

    inxi -Fnz

    Then post the result of this command here.

    When you start any topic or participate with any post, remember to check the option “Notify me of follow-up replies via email”, by checking this option you will receive a message in your email inbox whenever there are replies to the topic in question.

    marcelocripe
    (Original text in Brazilian Portuguese)

    ———-

    Olá arm45,

    Seja bem-vindo ao antiX Linux e ao fórum.

    Eu não sei escrever em idioma inglês, por isso eu te envio os meus textos traduzidos pelo tradutor da internet, eu espero que você consiga compreender tudo.

    Independentemente do seu nível de conhecimento sobre GNU/Linux, eu recomendo você ler estes excelentes tutoriais criados pelo @PPC:

    Short essential how-to list for the complete Linux newbie e How-to install applications – 2020 version.

    Para que as pessoas possam te ajudar, por favor, abra uma janela de terminal aplique o comando:

    inxi -Fnz

    Em seguida, poste aqui o resultado deste comando.

    Quando você iniciar algum tópico ou participar com alguma postagem, lembre-se de marcar a opção “Notify me of follow-up replies via email”, marcando esta opção, você receberá uma mensagem na sua caixa de e-mail sempre que houver respostas do tópico em questão.

    marcelocripe
    (Texto original em Português do Brasil)

    #63355
    Moderator
    Brian Masinick
    Helpful
    Up
    0

    Greetings arm45 and welcome to the antiX Forum!

    Brian Masinick

    #63361
    Moderator
    caprea
    Helpful
    Up
    0

    Does the sound work if you start slimjet from terminal with
    apulse /usr/bin/flashpeak-slimjet

    #63366
    Member
    arm45
    Helpful
    Up
    0

    Thank you!

    #63367
    Member
    arm45
    Helpful
    Up
    0

    Hello Marcelo,

    Thank you for your reply.

    Your translated post is quite clear! 🙂

    *
    * Quick info on my system (inxi -Fxxxrza)
    *
    System: Host: antix19.4 Kernel: 4.9.0-264-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 8.3.0
    parameters: BOOT_IMAGE=/vmlinuz-4.9.0-264-antix.1-amd64-smp root=UUID=fda475ef-b158-412e-aa66-ae712a1ef16d ro quiet
    Desktop: IceWM 2.3.4 dm: SLiM 1.3.6 Distro: antiX-19.4_x64-full Grup Yorum 20 May 2021
    base: Debian GNU/Linux 10 (buster)
    Machine: Type: Laptop System: LENOVO product: 2055CTO v: ThinkPad T500 serial: <filter> Chassis: type: 10 serial: <filter>
    Mobo: LENOVO model: 2055CTO serial: <filter> BIOS: LENOVO v: 7VET94WW (3.24 ) date: 12/13/2011
    Battery: ID-1: BAT0 charge: 51.9 Wh condition: 53.0/56.2 Wh (94%) volts: 12.5/10.8 model: Panasonic 42T4622 type: Li-ion
    serial: <filter> status: Unknown
    CPU: Topology: Dual Core model: Intel Core2 Duo T9600 bits: 64 type: MCP arch: Penryn family: 6 model-id: 17 (23)
    stepping: A (10) microcode: A0C L2 cache: 6144 KiB
    flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 11171
    Speed: 1600 MHz min/max: 800/1600 MHz boost: enabled Core speeds (MHz): 1: 1600 2: 1600
    Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages
    Type: l1tf mitigation: PTE Inversion; VMX: EPT disabled
    Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
    Type: meltdown mitigation: PTI
    Type: spec_store_bypass status: Vulnerable
    Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
    Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
    Type: srbds status: Not affected
    Type: tsx_async_abort status: Not affected
    Graphics: Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0
    chip ID: 8086:2a42
    Device-2: Advanced Micro Devices [AMD/ATI] RV635/M86 [Mobility Radeon HD 3650] vendor: Lenovo driver: N/A
    bus ID: 01:00.0 chip ID: 1002:9591
    Display: x11 server: X.Org 1.20.4 driver: intel resolution: 1920×1080~60Hz
    OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express v: 2.1 Mesa 18.3.6 direct render: Yes
    Audio: Device-1: Intel 82801I HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:293e
    Sound Server: ALSA v: k4.9.0-264-antix.1-amd64-smp
    Network: Device-1: Intel 82567LF Gigabit Network vendor: Lenovo driver: e1000e v: 3.2.6-k port: 1820 bus ID: 00:19.0
    chip ID: 8086:10bf
    IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
    Device-2: Intel Ultimate N WiFi Link 5300 driver: iwlwifi v: kernel port: 2000 bus ID: 03:00.0 chip ID: 8086:4236
    IF: wlan0 state: down mac: <filter>
    Drives: Local Storage: total: 1.38 TiB used: 584.18 GiB (41.4%)
    ID-1: /dev/sda vendor: Toshiba model: MQ01ACF050 size: 465.76 GiB block size: physical: 4096 B logical: 512 B
    speed: 3.0 Gb/s rotation: 7200 rpm serial: <filter> rev: 1D scheme: MBR
    ID-2: /dev/sdb type: USB vendor: Generic model: Flash Disk size: 7.62 GiB block size: physical: 512 B
    logical: 512 B serial: <filter> rev: 8.07 scheme: MBR
    ID-3: /dev/sdc type: USB vendor: Generic model: Flash Disk size: 7.62 GiB block size: physical: 512 B
    logical: 512 B serial: <filter> rev: 8.07
    ID-4: /dev/sdd vendor: Western Digital model: WD10JPVX-22JC3T0 size: 931.51 GiB block size: physical: 4096 B
    logical: 512 B speed: 3.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 1A01
    Partition: ID-1: / raw size: 64.00 GiB size: 62.74 GiB (98.04%) used: 4.72 GiB (7.5%) fs: ext4 dev: /dev/dm-0
    ID-2: /boot raw size: 512.0 MiB size: 487.9 MiB (95.30%) used: 49.8 MiB (10.2%) fs: ext4 dev: /dev/sda1
    ID-3: /home raw size: 393.20 GiB size: 386.03 GiB (98.18%) used: 8.49 GiB (2.2%) fs: ext4 dev: /dev/dm-1
    ID-4: swap-1 size: 7.98 GiB used: 0 KiB (0.0%) fs: swap swappiness: 10 (default 60)
    cache pressure: 50 (default 100) dev: /dev/dm-2
    Sensors: System Temperatures: cpu: 63.0 C mobo: 62.0 C
    Fan Speeds (RPM): fan-1: 2984
    Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
    1: deb http://mirrors.rit.edu/mxlinux/mx-packages/antix/buster buster main nonfree nosystemd
    Active apt repos in: /etc/apt/sources.list.d/buster-backports.list
    1: deb http://deb.debian.org/debian buster-backports main contrib non-free
    Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://ftp.us.debian.org/debian/ buster-updates main contrib non-free
    Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://ftp.us.debian.org/debian/ buster main contrib non-free
    2: deb http://security.debian.org/ buster/updates main contrib non-free
    No active apt repos in: /etc/apt/sources.list.d/onion.list
    No active apt repos in: /etc/apt/sources.list.d/various.list
    Info: Processes: 217 Uptime: 21h 58m Memory: 7.76 GiB used: 2.19 GiB (28.3%) Init: SysVinit v: 2.93 runlevel: 5
    default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 running in: roxterm inxi: 3.0.36

    #63368
    Member
    arm45
    Helpful
    Up
    0

    I tried your suggestion with the exception that I was already in /opt/slimjet when I entered apulse flashpeak-slimjet

    The results were very similar to previous experiences on entering ./flashpeak-slimjet

    The apparently most significant output to terminal on entering that was

    ALSA lib dlmisc.c:287:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib/x86_64-linux-gnu/alsa-lib/libasound_module_pcm_equal.so ((null): 
    /usr/lib/x86_64-linux-gnu/alsa-lib/libasound_module_pcm_equal.so: cannot open shared object file: Operation not permitted)
    
    [9770:9770:0720/154202.020196:ERROR:alsa_util.cc(204)] PcmOpen: default,No such device or address
    
    ALSA lib dlmisc.c:287:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib/x86_64-linux-gnu/alsa-lib/libasound_module_pcm_equal.so ((null):
    /usr/lib/x86_64-linux-gnu/alsa-lib/libasound_module_pcm_equal.so: cannot open shared object file: Operation not permitted)

    although why that error when both .so files were in place (with apparent proper permissions) is a curiosity.

    More info at https://tinyurl.com/2ctvhtck

    #63371
    Moderator
    caprea
    Helpful
    Up
    0

    I just tried on a live-stick and got the same error messages like you.
    This workaround still works for me and sound is there on slimjet. You might want to give it a try.
    https://www.antixforum.com/forums/topic/slimjet-no-sound-on-videos/#post-41593

    #63372
    Member
    arm45
    Helpful
    Up
    0

    I tried installing pulseaudio, then issued pasuspender — /usr/bin/flashpeak-slimjet –alsa-output-device=hw:0,1.

    No sound.
    I then uninstalled pulseaudio

    I’ll look a little deeper but I’m beginning to think of abandoning Slimjet.

    Thanks for your help.

    #63557
    Member
    seaken64
    Helpful
    Up
    0

    Welcome arm45. Can’t help with Slimjet. Used it in antiX-17 32-bit but haven’t used it recently and never in 64-bit.

    There other light weight browsers. Look in the Package Installer off the Control Centre. I use Chromium and SeaMonkey mostly.

    Seaken64

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.