Hewlett-Packard 5000 series desktop

Forum Forums General Hardware Hewlett-Packard 5000 series desktop

  • This topic has 0 replies, 1 voice, and was last updated Jul 14-3:49 pm by Brian Masinick.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #38880
    Moderator
    Brian Masinick

      Here are the specs for the Hewlett-Packard 5000 series desktop that I mentioned when I wrote about the three old systems that I recently acquired. This one I installed with antiX; the Lenovo Thinkpad X201 I installed with MX Linux 19.2 and the other laptop I installed with EXLinux. I like the way that antiX and MX Linux work better than the others, but with these old boxes I wanted to try a few other distros. On my primary Dell Inspiron 5558 laptop I have two instances of antiX, one with runit and the second was a traditional Base install with my own selection of software. MX Linux was a standard installation, and I also have an instance of Debian, openSUSE, Fedora, Zenwalk (Slackware CURRENT), and Mageia.

      With all of those distros I still like the antiX family of Debian derivatives best.

      Hewlett-Packard 5000 series desktop:

      inxi
      CPU: Dual Core AMD Athlon II X2 255 (-MCP-) speed/min/max: 800/800/3100 MHz 
      Kernel: 5.5.0-antix.1-amd64-smp x86_64 Up: 44m Mem: 889.6/3682.0 MiB (24.2%) 
      Storage: 698.64 GiB (0.9% used) Procs: 115 Shell: bash 5.0.3 inxi: 3.0.36 
      masinick@antix-Brian:~
      $ inxi -Fxz
      System:
        Host: antix-Brian Kernel: 5.5.0-antix.1-amd64-smp x86_64 bits: 64 
        compiler: gcc v: 8.3.0 Desktop: IceWM 1.6.6 
        Distro: antiX-19.1_x64-base Marielle Franco 23 December 2019 
        base: Debian GNU/Linux 10 (buster) 
      Machine:
        Type: Desktop System: Hewlett-Packard product: s5747c v: N/A 
        serial: <filter> 
        Mobo: PEGATRON model: 2A6C v: 5.00 serial: <filter> 
        BIOS: American Megatrends v: 6.01 date: 09/29/2010 
      CPU:
        Topology: Dual Core model: AMD Athlon II X2 255 bits: 64 type: MCP 
        arch: K10 rev: 3 L2 cache: 2048 KiB 
        flags: lm nx pae sse sse2 sse3 sse4a svm bogomips: 12456 
        Speed: 1900 MHz min/max: 800/3100 MHz Core speeds (MHz): 1: 1900 2: 800 
      Graphics:
        Device-1: NVIDIA C61 [GeForce 6150SE nForce 430] vendor: Hewlett-Packard 
        driver: N/A bus ID: 00:0d.0 
        Display: server: X.Org 1.20.4 driver: vesa resolution: 1024x768~N/A 
        OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.3.6 
        direct render: Yes 
      Audio:
        Device-1: NVIDIA MCP61 High Definition Audio vendor: Hewlett-Packard 
        driver: snd_hda_intel v: kernel bus ID: 00:05.0 
        Sound Server: ALSA v: k5.5.0-antix.1-amd64-smp 
      Network:
        Device-1: NVIDIA MCP61 Ethernet vendor: Hewlett-Packard 
        type: network bridge driver: forcedeth v: kernel port: e480 
        bus ID: 00:07.0 
        IF: eth1 state: down mac: <filter> 
        Device-2: Ralink RT2790 Wireless 802.11n 1T/2R PCIe vendor: Lite-On 
        driver: rt2800pci v: 2.3.0 port: d000 bus ID: 03:00.0 
        IF: wlan1 state: up mac: <filter> 
      Drives:
        Local Storage: total: 698.64 GiB used: 6.42 GiB (0.9%) 
        ID-1: /dev/sda vendor: Seagate model: ST3750528AS size: 698.64 GiB 
      Partition:
        ID-1: / size: 684.67 GiB used: 6.42 GiB (0.9%) fs: ext4 dev: /dev/sda1 
        ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2 
      Sensors:
        System Temperatures: cpu: 23.1 C mobo: N/A 
        Fan Speeds (RPM): N/A 
      Info:
        Processes: 115 Uptime: 44m Memory: 3.60 GiB used: 893.1 MiB (24.3%) 
        Init: SysVinit runlevel: 5 Compilers: gcc: 8.3.0 Shell: bash v: 5.0.3 
        inxi: 3.0.36 
      masinick@antix-Brian:~
      • This topic was modified 2 years, 10 months ago by Brian Masinick.

      --
      Brian Masinick

    Viewing 1 post (of 1 total)
    • You must be logged in to reply to this topic.