IMac Specs

Forum Forums General Hardware IMac Specs

  • This topic has 5 replies, 3 voices, and was last updated May 9-3:36 pm by Noman01.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #82833
    Member
    Noman01

    Been working on this for a while using the tips from this forum and though I would share the specs on my setup.

    System:    Kernel: 4.9.0-294-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 10.2.1 
               parameters: BOOT_IMAGE=/boot/vmlinuz-4.9.0-294-antix.1-amd64-smp 
               root=UUID=3a611e9c-529a-4d01-b6c6-70d9769dfedc ro quiet 
               Desktop: IceWM 2.9.7 info: tint2 vt: 7 dm: N/A 
               Distro: antiX-21_x64-base Grup Yorum 31 October 2021 
               base: Debian GNU/Linux 11 (bullseye) 
    Machine:   Type: Desktop System: Apple product: iMac9,1 v: 1.0 serial: <filter> Chassis: type: 13 
               v: Mac-F2218FA9 serial: <filter> 
               Mobo: Apple model: Mac-F2218FA9 serial: <filter> UEFI: Apple 
               v: IM91.88Z.008D.B08.0904271717 date: 04/27/09 
    Battery:   Message: No system battery data found. Is one present? 
    Memory:    RAM: total: 3.61 GiB used: 675.1 MiB (18.3%) 
               RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
    PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. 
    CPU:       Info: Dual Core model: Intel Core2 Duo E8135 bits: 64 type: MCP arch: Penryn family: 6 
               model-id: 17 (23) stepping: A (10) microcode: A0B cache: L2: 6 MiB bogomips: 10612 
               Speed: 1596 MHz min/max: 1596/2660 MHz Core speeds (MHz): 1: 1596 2: 1596 
               Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de 
               ds_cpl dtes64 dtherm dts est flexpriority fpu fxsr ht kaiser lahf_lm lm mca mce mmx 
               monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge pni pse pse36 rep_good sep ss sse 
               sse2 sse4_1 ssse3 syscall tm tm2 tpr_shadow tsc vme vmx vnmi xsave xtpr 
               Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages 
               Type: l1tf mitigation: PTE Inversion; VMX: EPT disabled 
               Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
               Type: meltdown mitigation: PTI 
               Type: spec_store_bypass status: Vulnerable 
               Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
               Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling 
               Type: srbds status: Not affected 
               Type: tsx_async_abort status: Not affected 
    Graphics:  Device-1: NVIDIA C79 [GeForce 9400] vendor: Apple iMac 9 1 driver: nouveau v: kernel 
               bus-ID: 03:00.0 chip-ID: 10de:0867 class-ID: 0300 
               Device-2: Apple Built-in iSight type: USB driver: uvcvideo bus-ID: 1-4:3 
               chip-ID: 05ac:8502 class-ID: 0e02 serial: <filter> 
               Display: x11 server: X.Org 1.20.11 compositor: compton v: 1 driver: loaded: modesetting 
               unloaded: fbdev,vesa display-ID: :0.0 screens: 1 
               Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 508x317mm (20.0x12.5") 
               s-diag: 599mm (23.6") 
               Monitor-1: LVDS-1 res: 1920x1200 hz: 60 dpi: 186 size: 262x324mm (10.3x12.8") 
               diag: 417mm (16.4") 
               OpenGL: renderer: NVAC v: 3.3 Mesa 20.3.5 direct render: Yes 
    Audio:     Device-1: NVIDIA MCP79 High Definition Audio driver: snd_hda_intel v: kernel 
               bus-ID: 00:08.0 chip-ID: 10de:0ac0 class-ID: 0403 
               Sound Server-1: ALSA v: k4.9.0-294-antix.1-amd64-smp running: yes 
    Network:   Device-1: NVIDIA MCP79 Ethernet driver: forcedeth v: kernel port: 21e0 bus-ID: 00:0a.0 
               chip-ID: 10de:0ab0 class-ID: 0200 
               IF: eth0 state: down mac: <filter> 
               Device-2: Broadcom BCM4322 802.11a/b/g/n Wireless LAN vendor: Apple AirPort Extreme 
               driver: wl v: kernel modules: ssb port: 1000 bus-ID: 04:00.0 chip-ID: 14e4:432b 
               class-ID: 0280 
               IF: wlan0 state: up mac: <filter> 
               IP v4: <filter> scope: global broadcast: <filter> 
               IP v6: <filter> scope: global 
               IP v6: <filter> type: dynamic mngtmpaddr scope: global 
               IP v6: <filter> scope: link 
               WAN IP: <filter> 
    Bluetooth: Device-1: Apple Built-in Bluetooth 2.0+EDR HCI type: USB driver: btusb v: 0.8 
               bus-ID: 4-1.1:3 chip-ID: 05ac:8215 class-ID: fe01 serial: <filter> 
               Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
               hardware: no software: yes address: see --recommends 
    Logical:   Message: No logical block device data found. 
    RAID:      Message: No RAID data found. 
    Drives:    Local Storage: total: 603.38 GiB used: 10.56 GiB (1.8%) 
               SMART Message: Unable to run smartctl. Root privileges required. 
               ID-1: /dev/sda maj-min: 8:0 vendor: Hitachi model: HDT721064SLA360 size: 596.17 GiB 
               block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 
               serial: <filter> rev: A36A scheme: GPT 
               ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Monster Digital model: N/A 
               size: 7.21 GiB block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> 
               rev: PMAP scheme: MBR 
               SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
               Optical-1: /dev/sr0 vendor: OPTIARC model: DVD RW AD-5670S rev: 2AHH 
               dev-links: cdrom,cdrw,dvd,dvdrw 
               Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r 
               state: running 
    Partition: ID-1: / raw-size: 590.41 GiB size: 580.08 GiB (98.25%) used: 6.9 GiB (1.2%) fs: ext4 
               dev: /dev/sda2 maj-min: 8:2 label: rootantiX21 
               uuid: 3a611e9c-529a-4d01-b6c6-70d9769dfedc 
               ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat 
               dev: /dev/sda1 maj-min: 8:1 label: EFI System uuid: 15CE-591B 
               ID-3: /home/<filter>/GoogleDrive-FT10 raw-size: N/A size: 15 GiB used: 2.91 GiB (19.4%) 
               fs: fuse.rclone source: ERR-102 
               ID-4: /media/Noman01/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.39%) 
               used: 5.4 MiB (11.2%) fs: vfat dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI 
               uuid: 7EC0-6187 
               ID-5: /media/Noman01/antiX-Live-usb raw-size: 7.16 GiB size: 7 GiB (97.77%) 
               used: 772.7 MiB (10.8%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb 
               uuid: 2043e432-fe44-4082-9190-ceb4d541987a 
    Swap:      Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) 
               ID-1: swap-1 type: partition size: 5.5 GiB used: 0 KiB (0.0%) priority: -1 
               dev: /dev/sda3 maj-min: 8:3 label: swapantiX uuid: c9e2e81d-07b6-4b42-91f9-08b68f470018 
    Unmounted: Message: No unmounted partitions found. 
    USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 7 rev: 2.0 speed: 480 Mb/s 
               chip-ID: 1d6b:0002 class-ID: 0900 
               Device-1: 1-1:6 info: Monster MONSTER DIGITAL type: Mass Storage driver: usb-storage 
               interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 300mA chip-ID: 2897:5450 class-ID: 0806 
               serial: <filter> 
               Hub-2: 1-3:2 info: Apple Keyboard Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 300mA 
               chip-ID: 05ac:1005 class-ID: 0900 
               Device-1: 1-3.2:4 info: Apple Aluminum Mini Keyboard (ANSI) type: Keyboard,HID 
               driver: apple,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 20mA 
               chip-ID: 05ac:021d class-ID: 0300 
               Device-2: 1-4:3 info: Apple Built-in iSight type: Video driver: uvcvideo interfaces: 3 
               rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 05ac:8502 class-ID: 0e02 
               serial: <filter> 
               Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
               chip-ID: 1d6b:0002 class-ID: 0900 
               Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 7 rev: 1.1 speed: 12 Mb/s 
               chip-ID: 1d6b:0001 class-ID: 0900 
               Device-1: 3-5:2 info: Apple Built-in IR Receiver type: HID driver: appleir,usbhid 
               interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 05ac:8242 class-ID: 0300 
               Hub-5: 4-0:1 info: Full speed (or root) Hub ports: 5 rev: 1.1 speed: 12 Mb/s 
               chip-ID: 1d6b:0001 class-ID: 0900 
               Hub-6: 4-1:2 info: Broadcom BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) ports: 3 
               rev: 2.0 speed: 12 Mb/s chip-ID: 0a5c:4500 class-ID: 0900 
               Device-1: 4-1.1:3 info: Apple Built-in Bluetooth 2.0+EDR HCI type: Bluetooth 
               driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip-ID: 05ac:8215 class-ID: fe01 
               serial: <filter> 
               Device-2: 4-4:4 info: Apple Mighty Mouse [Mitsumi M1152] type: Mouse 
               driver: apple,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA 
               chip-ID: 05ac:0304 class-ID: 0301 
    Sensors:   System Temperatures: cpu: 84.0 C mobo: 0.0 C gpu: nouveau temp: 45.0 C 
               Fan Speeds (RPM): cpu: 1197 
    Repos:     Packages: apt: 1460 lib: 779 
               Active apt repos in: /etc/apt/sources.list.d/antix.list 
               1: deb http: //mirrors.rit.edu/mxlinux/mx-packages/antix/bullseye bullseye main nosystemd nonfree
               Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 
               1: deb [arch=amd64] https: //brave-browser-apt-release.s3.brave.com/ bullseye main
               Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 
               1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free
               Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
               1: deb http: //ftp.us.debian.org/debian/ bullseye-updates main contrib non-free
               Active apt repos in: /etc/apt/sources.list.d/debian.list 
               1: deb http: //ftp.de.debian.org/debian/ bullseye main contrib non-free
               2: deb http: //security.debian.org/ bullseye-security main contrib non-free
               No active apt repos in: /etc/apt/sources.list.d/various.list 
    Processes: CPU top: 5 of 260 
               1: cpu: 17.0% command: yad pid: 9109 mem: 29.2 MiB (0.7%) 
               2: cpu: 2.0% command: gtkdialog pid: 9068 mem: 29.0 MiB (0.7%) 
               3: cpu: 0.2% command: [kworker/u4:82] pid: 7937 mem: 0.00 MiB (0.0%) 
               4: cpu: 0.1% command: antixcc.sh started by: bash pid: 8907 mem: 3.29 MiB (0.0%) 
               5: cpu: 0.0% command: init pid: 1 mem: 2.01 MiB (0.0%) 
               Memory top: 5 of 260 
               1: mem: 71.7 MiB (1.9%) command: xorg pid: 5372 cpu: 0.0% 
               2: mem: 68.1 MiB (1.8%) command: rclone pid: 10966 cpu: 0.0% 
               3: mem: 40.6 MiB (1.0%) command: tor pid: 11683 cpu: 0.0% 
               4: mem: 29.2 MiB (0.7%) command: yad pid: 9109 cpu: 17.0% 
               5: mem: 29.0 MiB (0.7%) command: gtkdialog pid: 9068 cpu: 2.0% 
    Info:      Processes: 260 Uptime: 11d 20h 56m wakeups: 17 Init: SysVinit v: 2.96 runlevel: 5 
               default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper 
               v: 5.1.4-release inxi: 3.3.06
    • This topic was modified 1 week, 6 days ago by Noman01.
    #82874
    Member
    seaken64
    Helpful
    Up
    0
    ::

    Thank you. FYI, it is always best to surround these types of listed outputs in Code tags. It makes it easier to read.

    Seaken64

    #82879
    Member
    Noman01
    Helpful
    Up
    0
    ::

    Ok!

    #82890
    Member
    seaken64
    Helpful
    Up
    0
    ::

    Thank you.

    #82916
    Member
    madibi
    Helpful
    Up
    0
    ::

    @Norman01
    Dear, I see that the CPU temperature is pretty high (=84 °C)

    Norman01 wrote
    Sensors: System Temperatures: cpu: 84.0 C mobo: 0.0 C gpu: nouveau temp: 45.0 C
    Fan Speeds (RPM): cpu: 1197

    May be better for you to install Psensor in order to costantly monitor your Mac Temp.
    “macfanctld” is a 2nd option, better to be used with MacBook Pro.

    I insist on this point because in 2014 I had the bad experience of having a 2G ram stick burned by ubuntu (on a 2008 MacBook Pro)
    In any case those very high temperatures are not good for the life of your whole system.

    The Mac you have is beautiful! I would put it as an exhibit in the living room 🙂

    OT: On an Imac ver 12.2, (12 Gram), last month I installed Mx + Plasma + plank + MacOS theme – previously it was installed El Capitan. The owner is now really so happy!

    m

    • This reply was modified 1 week, 5 days ago by madibi.
    • This reply was modified 1 week, 5 days ago by madibi.
    #82923
    Member
    Noman01
    Helpful
    Up
    0
    ::

    Thanks I’ll give it a try.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.