Forum › Forums › New users › New Users and General Questions › installation
- This topic has 11 replies, 2 voices, and was last updated Mar 6-5:54 am by th.
-
AuthorPosts
-
January 31, 2020 at 4:21 am #32287Member
th
hello everyone…..
when I boot from a bootable flash drive, then after selecting antix, the graphical interface does not load
USB flash drive working
image verifiedJanuary 31, 2020 at 7:37 am #32293Forum Admin
anticapitalista
::You need to give us much more information if you want help.
How did you put antiX onto the usb device (which app)?
Which version of antiX?
UEFI or grub boot?
Did you try any other menu options besides the default one?You haven’t given us any information about the hardware.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - leaner and meaner.
January 31, 2020 at 7:44 am #32298Memberth
January 31, 2020 at 7:52 am #32299Memberth
::th@debian:~$ sudo dmidecode -t 2 # dmidecode 3.2 Getting SMBIOS data from sysfs. SMBIOS 3.1.1 present. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: Gigabyte Technology Co., Ltd. Product Name: B360M D2V Version: x.x Serial Number: Default string Asset Tag: Default string Features: Board is a hosting board Board is replaceable Location In Chassis: Default string Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 th@debian:~$January 31, 2020 at 8:13 am #32302Memberth
::Did you try any other menu options besides the default one?
the command line opens
is it supposed to be installed like this?
You will agree that this is a bit more complicated? 🙂January 31, 2020 at 8:22 am #32304Forum Admin
anticapitalista
::No it is not supposed to boot to a non-graphical environment.
Try booting with the Advanced Options then Failsafe.
You still need to tell us some more about your hardware.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - leaner and meaner.
January 31, 2020 at 8:43 am #32305Memberth
::Try booting with the Advanced Options then Failsafe.
can I please read a little more
You still need to tell us some more about your hardware.
what else to write about?
CPU: Intel i5-8500 (6) @ 4.100GHz GPU: Intel UHD Graphics 630 Memory: 2199MiB / 15906MiB- This reply was modified 3 years, 3 months ago by th.
January 31, 2020 at 12:18 pm #32313Forum Admin
anticapitalista
::If that is Intel Coffee Lake, then you need a newer kernel than the one shipped with antiX-19.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - leaner and meaner.
January 31, 2020 at 12:24 pm #32314Memberth
January 31, 2020 at 12:41 pm #32317Forum Admin
anticapitalista
::You could try and boot failsafe mode as I mentioned earlier, install to hard drive and then install a newer kernel.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - leaner and meaner.
January 31, 2020 at 1:14 pm #32318Memberth
::You could try and boot failsafe mode as I mentioned earlier, install to hard drive and then install a newer kernel.
I’m not an expert yet to perform such manipulations….
okay….
Thank you very much.
good luck!…March 6, 2020 at 5:54 am #33355Memberth
::Try booting with the Advanced Options then Failsafe.
I tried it after Failsafe..hang.
should the picture appear there or not?- This reply was modified 3 years, 2 months ago by th.
-
AuthorPosts
- You must be logged in to reply to this topic.