(solved) Live USB won’t boot – cannot execute /sbin/getty

[Member Grisonix]

I went to boot a live usb and when it got to “INIT” it failed. Error messages:

INIT: cannot execute “/sbin/getty”
INIT: cannot execute “/sbin/getty”
INIT: cannot execute “/sbin/getty”
INIT: cannot execute “/sbin/getty”
INIT: Id “2” respawning too fast : disabled for 5 minutes
INIT: cannot execute “/sbin/getty”
INIT: cannot execute “/sbin/getty”
INIT: Id “6” respawning too fast : disabled for 5 minutes
INIT: cannot execute “/sbin/getty”
INIT: cannot execute “/sbin/getty”
INIT: cannot execute “/sbin/getty”
INIT: cannot execute “/sbin/getty”
INIT: Id “4” respawning too fast : disabled for 5 minutes
INIT: cannot execute “/sbin/getty”
INIT: Id “1” respawning too fast : disabled for 5 minutes
INIT: cannot execute “/sbin/getty”
INIT: cannot execute “/sbin/getty”
INIT: cannot execute “/sbin/getty”
INIT: cannot execute “/sbin/getty”
INIT: Id “5” respawning too fast : disabled for 5 minutes
INIT: cannot execute “/sbin/getty”
INIT: Id “3” respawning too fast : disabled for 5 minutes
INIT: no more processes left in this runlevel.

I made the USB using the Live USB Maker.

• This topic was modified 12 months ago by christophe. Reason: Solved

[Moderator christophe]

Helpful

Up

1

::

Try downloading again, checking the md5sum. And remake the live-usb.
(Unless someone else has seen this before – because I have made (probably) a hundred live usbs over the past 6 years, and I have never seen that.)

confirmed antiX frugaler, since 2019

[Member Grisonix]

Helpful

Up

0

::

Thank you. Remaking the live-usb worked.

[Author]

Posts