Midori 8

Forum Forums General Software Midori 8

  • This topic has 23 replies, 5 voices, and was last updated Mar 12-7:23 pm by caprea.
Viewing 15 posts - 1 through 15 (of 24 total)
  • Author
    Posts
  • #19170
    Forum Admin
    rokytnjirokytnji

    Just a carry over from the MX forum. Quick test run on

    harry@biker:~
    $ inxi -Fxz
    System:
      Host: biker Kernel: 4.20.12-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 6.3.0 
      Desktop: IceWM 1.4.2 Distro: antiX-17_x64-full Heather Heyer 24 October 2017 
      base: Debian GNU/Linux 9 (stretch) 
    Machine:
      Type: Desktop System: Google product: Parrot v: 1.0 serial: <filter> 
      Mobo: Google model: Parrot v: 1.0 serial: <filter> BIOS: coreboot 
      v: 4.0-6588-g4acd8ea-dirty date: 09/04/2014 
    Battery:
      ID-1: BATX charge: 31.3 Wh condition: 31.3/37.0 Wh (85%) model: SANYO AL12B32 
      status: Full 
    CPU:
      Topology: Dual Core model: Intel Celeron 1007U bits: 64 type: MCP arch: Ivy Bridge 
      rev: 9 L2 cache: 2048 KiB 
      flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 5986 
      Speed: 1259 MHz min/max: 800/1500 MHz Core speeds (MHz): 1: 815 2: 974 
    Graphics:
      Device-1: Intel 3rd Gen Core processor Graphics driver: i915 v: kernel 
      bus ID: 00:02.0 
      Display: server: X.Org 1.19.2 driver: modesetting unloaded: fbdev,vesa 
      resolution: 1366x768~60Hz 
      OpenGL: renderer: Mesa DRI Intel Ivybridge Mobile v: 3.3 Mesa 13.0.6 
      direct render: Yes 
    Audio:
      Device-1: Intel 7 Series/C216 Family High Definition Audio driver: snd_hda_intel 
      v: kernel bus ID: 00:1b.0 
      Sound Server: ALSA v: k4.20.12-antix.1-amd64-smp 
    Network:
      Device-1: Qualcomm Atheros AR9462 Wireless Network Adapter vendor: Foxconn 
      driver: ath9k v: kernel port: 0400 bus ID: 01:00.0 
      IF: wlan0 state: up mac: <filter> 
      Device-2: Broadcom and subsidiaries NetLink BCM57785 Gigabit Ethernet PCIe 
      vendor: Acer Incorporated ALI driver: tg3 v: 3.137 port: 0400 bus ID: 02:00.0 
      IF: eth0 state: down mac: <filter> 
    Drives:
      Local Storage: total: 14.91 GiB used: 7.79 GiB (52.2%) 
      ID-1: /dev/sda vendor: SanDisk model: SSD U100 16GB size: 14.91 GiB 
    Partition:
      ID-1: / size: 14.62 GiB used: 7.79 GiB (53.3%) fs: ext4 dev: /dev/sda1 
    Sensors:
      System Temperatures: cpu: 50.0 C mobo: N/A 
      Fan Speeds (RPM): N/A 
    Info:
      Processes: 132 Uptime: 2h 01m Memory: 3.79 GiB used: 1.04 GiB (27.4%) Init: SysVinit 
      runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.29 
    harry@biker:~
    $ apt-cache policy midori
    midori:
      Installed: 8.0-0.1~mx17+1
      Candidate: 8.0-0.1~mx17+1
      Version table:
     *** 8.0-0.1~mx17+1 100
            100 /var/lib/dpkg/status
         0.5.11-ds1-4+b1 500
            500 http://ftp.us.debian.org/debian stretch/main amd64 Packages

    No crash yet. Midori complains about not being able to find gstreamer opengl plugin when ran in terminal and one tries to play a video. But I should mention

    Commit Log for Wed Mar  6 19:17:07 2019
    
    Installed the following packages:
    libbrotli1 (1.0.5-2~bpo9+1~mx17+1)
    libgstreamer-plugins-bad1.0-0 (1.10.4-1)
    libjavascriptcoregtk-4.0-18 (2.22.7-1~mx17+1)
    libpeas-1.0-0 (1.20.0-1+b1)
    libpeas-common (1.20.0-1)
    libpython3.5 (3.5.3-1+deb9u1)
    libwebkit2gtk-4.0-37 (2.22.7-1~mx17+1)
    libwoff1 (1.0.2-1~mx17+1)
    midori (8.0-0.1~mx17+1)

    and trying to fix youtube video I did

    Commit Log for Wed Mar  6 19:26:29 2019
    
    Installed the following packages:
    gstreamer1.0-libav (1.10.4-1)

    Bed thirty for me. Good nite bros.

    Sometimes I drive a crooked road to get my mind straight.
    Not all who Wander are Lost.
    Linux Registered User # 475019
    How to Search for AntiX solutions to your problems

    #19171
    Forum Admin
    rokytnjirokytnji

    Forgot t include:

    When I test. I enable the MX test repo in synaptic sources list. Hit reload. Install application. Then comment out MX test repo < untick the check box that was checked earlier to install the app > . Hit reload. Then close synaptic package manager.

    Sometimes I drive a crooked road to get my mind straight.
    Not all who Wander are Lost.
    Linux Registered User # 475019
    How to Search for AntiX solutions to your problems

    #19172
    Member
    capreacaprea

    Is gstreamer1.0-plugins-bad installed ?

    $ apt-cache policy gstreamer1.0-plugins-bad
    gstreamer1.0-plugins-bad:
      Installiert:           1.10.4-1
      Installationskandidat: 1.10.4-1
      Versionstabelle:
     *** 1.10.4-1 500
            500 http://mirror.plusserver.com/debian/debian stretch/main amd64 Packages
            100 /var/lib/dpkg/status
    #19185
    Forum Admin
    rokytnjirokytnji

    It was not. I went ahead and installed it. Youtube still errors out. Terminal does not throw a can’t find a opengl plugin error youtube. Just a ton of repeat gtk errors anymore while runnig midori. Changing my gtk theme to Arc Dark did not stop the gtk error readouts.

    harry@biker:~
    $ midori
    
    (midori:5216): GLib-CRITICAL **: g_regex_match_full: assertion 'string != NULL' failed
    
    (midori:5216): Gtk-WARNING **: Allocating size to GtkPaned 0x55bdf81b2800 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?
    <snip> over and over ^^^

    Was worth a shot. Thanks.

    Sometimes I drive a crooked road to get my mind straight.
    Not all who Wander are Lost.
    Linux Registered User # 475019
    How to Search for AntiX solutions to your problems

    #19199
    Member
    Avatarandfree

    I enable the MX test repo in synaptic sources list.

    I can’t find it.

    #19222
    AvatarAnonymous

    Check all of the files in /etc/apt in your file manager.
    Make a couple of screenshots of what you found.

    #19229
    Member
    Avatarandfree
    $ dir /etc/apt
    apt.conf    preferences.d  sources.list.d  trusted.gpg
    apt.conf.d  sources.list   trustdb.gpg	   trusted.gpg.d
    $ dir /etc/apt/sources.list.d
    antix.list	     debian.list		 onion.list
    antix.list.dpkg-old  debian-stable-updates.list  various.list

    See the contents of every list in the attachment.

    Attachments:
    1. lists.txt
    #19232
    AvatarAnonymous

    Then you open antix.list in Terminal with:

    sudo /etc/apt/sources.list.d/antix.list

    In second out of three groups, you should find it.

    You are looking for the line with “… stretch test” at the end:

    # MX Community Main and Test Repos
    deb http://nl.mxrepo.com/mx/repo/ stretch main non-free
    #deb http://nl.mxrepo.com/mx/testrepo/ stretch test

    … and you TEMPORARILY remove ‘#’ at the beginning of the line.

    No sign == enabled; With sign == disabled

    You don’t want the one starting with ‘src-deb’, but the one that has only ‘deb…’ at the beginning.

    Part (path) before may vary, depending on your configuration (from which repo you are downloading from).

    After you removed ‘#’ and saved the file, you open the Terminal and execute:

    sudo apt-get update
    sudo apt-get install ... whatever you're trying to install

    After you’re done, you repeat the process and DISABLE (set ‘#’ at the beginning of the line) the testing repository again and execute:

    sudo apt-get update

    Now your antiX forgot about testing again.

    #19235
    Member
    capreacaprea

    Hi andfree,
    you will not find the mxtest-repo in any of your lists.

    You have to edit your /etc/apt/sources.list.d
    I placed it in the various list.

    deb http://la.mxrepo.com/mx/testrepo/ stretch test

    You also have to download the keyring_all.deb for the repo and install it manually with gdebi for example

    http://la.mxrepo.com/mx/repo/pool/main/m/mx-archive-keyring/

    midori runs fine here on antiX besides the gtk-errors roky mentioned.

    Please dont forget to disable the test-repo after the installation of midori !

    • This reply was modified 8 months, 2 weeks ago by caprea.
    #19249
    Member
    Avatarandfree

    Thanks for your help. Indeed, no mx testrepo in any of my lists. I placed it in the various list, too. I installed gdebi and used it to install the keyring_all.deb for the repo. I used Synaptic to install midori 8. After all, I unticked the check box for the mx testrepo and hit reload.

    Unfortunately, midori doesn’t run fine on this antiX system. Pages seem to be loaded but, at the end, only a blank page is displayed.

    $ midori
    
    (midori:2441): GLib-CRITICAL **: g_regex_match_full: assertion 'string != NULL' failed
    
    (midori:2441): Gtk-WARNING **: Allocating size to GtkPaned 0x1af2430 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?
    
    ** (midori:2441): CRITICAL **: session.vala:278: Failed add tab to session database: Invalid type '(null)' in statement: 
                    INSERT INTO tabs (crdate, tstamp, session_id, uri, title)
                    VALUES (:crdate, :tstamp, :session_id, :uri, :title)
                    
    
    (midori:2441): Gtk-WARNING **: Allocating size to GtkPaned 0x1af2430 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?
    
    (midori:2441): Gtk-WARNING **: Allocating size to GtkPaned 0x1af2430 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?
    
    (midori:2441): Gtk-WARNING **: Allocating size to GtkPaned 0x1af2430 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?
    
    (midori:2441): Gtk-WARNING **: Allocating size to GtkPaned 0x1af2430 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?
    $ inxi -Fxz
    System:    Host: ts2450s203 Kernel: 4.9.160-antix.2-486-smp i686 bits: 32 compiler: gcc v: 6.3.0 Desktop: IceWM 1.4.2 
               Distro: antiX-17_386-base Heather Heyer 24 October 2017 base: Debian GNU/Linux 9 (stretch) 
    Machine:   Type: Laptop System: TOSHIBA product: Satellite 2450 v: PS245E-03TE0-GK serial: <filter> 
               Mobo: TOSHIBA model: Portable PC v: Version A0 serial: <filter> BIOS: TOSHIBA v: Version 1.30 date: 03/20/2003 
    CPU:       Topology: Single Core model: Intel Pentium 4 bits: 32 type: MCP arch: Netburst Northwood rev: 7 L2 cache: 512 KiB 
               flags: pae sse sse2 bogomips: 5586 
               Speed: 2793 MHz min/max: N/A Core speed (MHz): 1: 2793 
    Graphics:  Device-1: NVIDIA NV17M [GeForce4 420 Go] vendor: Toshiba America Info Systems driver: nouveau v: kernel 
               bus ID: 01:00.0 
               Display: server: X.Org 1.19.2 driver: nouveau unloaded: fbdev,modesetting,vesa resolution: 1024x768~60Hz 
               OpenGL: renderer: Mesa DRI nv17 x86/MMX/SSE2 v: 1.2 Mesa 13.0.6 direct render: Yes 
    Audio:     Device-1: Intel 82801DB/DBL/DBM AC97 Audio vendor: Toshiba America Info Systems driver: snd_intel8x0 v: kernel 
               bus ID: 00:1f.5 
               Sound Server: ALSA v: k4.9.160-antix.2-486-smp 
    Network:   Device-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Toshiba America Info Systems 
               driver: 8139too v: 0.9.28 port: ce00 bus ID: 02:09.0 
               IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: <filter> 
    Drives:    Local Storage: total: 93.16 GiB used: 49.13 GiB (52.7%) 
               ID-1: /dev/sda vendor: Toshiba model: MK1032GAX size: 93.16 GiB 
    Partition: ID-1: / size: 81.32 GiB used: 49.13 GiB (60.4%) fs: ext4 dev: /dev/sda1 
               ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2 
    Sensors:   System Temperatures: cpu: 65.0 C mobo: N/A 
               Fan Speeds (RPM): N/A 
    Info:      Processes: 116 Uptime: 23m Memory: 1002.8 MiB used: 271.6 MiB (27.1%) Init: SysVinit runlevel: 5 Compilers: 
               gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.29
    • This reply was modified 8 months, 2 weeks ago by andfree.
    • This reply was modified 8 months, 2 weeks ago by andfree.
    #19252
    Member
    capreacaprea

    Yes, I’ve seen this also.What I did after installation is, went into the settings in the upper right corner and changed the startpage and side which opens at start. First I had the impression this doesn’t help, but suddenly it worked somehow.

    #19254
    Member
    cyrilus31cyrilus31

    Same here. antiX and MX forums work but many websites display a white page.

    And compared to Palemoon, Midori uses 100% of my cpu.

    • This reply was modified 8 months, 2 weeks ago by cyrilus31.
    #19256
    Member
    capreacaprea

    cyrilus31,
    cpu usage here is the same like firefox.
    Which side does not open for example ?
    Seems to work here, but didn’t use it so much.
    Youtube works after installing gstreamer1.0-plugins-bad.
    Did you try it on MX already ?

    Also, this is not on a clean installation. I’ve installed some other browsers here.Maybe something was pulled in by another browser, which is missing on your installation.

    • This reply was modified 8 months, 2 weeks ago by caprea.
    #19266
    Member
    cyrilus31cyrilus31

    Hi Caprea
    I just tried on my MX instal on the same laptop. Almost same behavior except CPU is not always stuck at 100%.
    MX forum works perfectly and CPU use is normal.
    I had to deactive scripts in Midori settings to open antixforum and login page freezes my PC for a long time.
    Many sites display a white page (e.g lesnumeriques.com)

    $ inxi -F
    System:    Host: Inspiron5100 Kernel: 4.15.9-antix.1-686-smp-pae i686 bits: 32 
               Desktop: Xfce 4.12.3 Distro: MX-18.1_386 Continuum December 10  2017 
    Machine:   Type: Portable System: Dell product: Inspiron 5100 v: N/A serial: <root required> 
               Mobo: Dell model: 09U808 serial: <root required> BIOS: Dell v: A31 date: 08/26/2004 
    Battery:   ID-1: BAT0 charge: 95.5 Wh condition: 45.9/95.5 Wh (48%) 
    CPU:       Topology: Single Core model: Intel Pentium 4 bits: 32 type: MCP L2 cache: 512 KiB 
               Speed: 2392 MHz min/max: N/A Core speed (MHz): 1: 2392 
    Graphics:  Device-1: AMD RV200/M7 [Mobility Radeon 7500] driver: radeon v: kernel 
               Display: x11 server: X.Org 1.19.2 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
               resolution: 1024x768_60.00~60Hz 
               OpenGL: renderer: Mesa DRI R100 (RV200 4C57) x86/MMX/SSE2 DRI2 v: 1.3 Mesa 18.2.6 
    Audio:     Device-1: Intel 82801DB/DBL/DBM AC97 Audio driver: snd_intel8x0 
               Sound Server: ALSA v: k4.15.9-antix.1-686-smp-pae 
    Network:   Device-1: Broadcom Limited BCM4401 100Base-T driver: b44 
               Device-2: Broadcom Limited BCM4306 802.11b/g Wireless LAN driver: b43-pci-bridge 
               IF-ID-1: eth0 state: down mac: 00:0d:56:36:c7:f0 
               IF-ID-2: wlan0 state: up mac: 00:11:50:3a:6c:08 
    Drives:    Local Storage: total: 149.05 GiB used: 8.01 GiB (5.4%) 
               ID-1: /dev/sda vendor: Samsung model: HM160HC size: 149.05 GiB 
    Partition: ID-1: / size: 28.74 GiB used: 8.01 GiB (27.9%) fs: ext4 dev: /dev/sda3 
    Sensors:   System Temperatures: cpu: 50.0 C mobo: N/A 
               Fan Speeds (RPM): cpu: 3094 
    Info:      Processes: 150 Uptime: 55m Memory: 1.97 GiB used: 276.6 MiB (13.7%) Shell: bash 
               inxi: 3.0.29
    • This reply was modified 8 months, 2 weeks ago by cyrilus31.
    #19269
    Member
    Avatarandfree

    Similar behavior here. MX forum works. Deactiving scripts opened antiX forum, but I can’t login. Other sites still display a white page.

Viewing 15 posts - 1 through 15 (of 24 total)
  • You must be logged in to reply to this topic.