Midori 8 – antiX-forum

This topic has 27 replies, 7 voices, and was last updated Dec 22-2:49 pm by Girafenaine.

Viewing 15 posts - 1 through 15 (of 28 total)

1 2 →

Author

Posts

March 6, 2019 at 7:36 pm #19170

Forum Admin

rokytnji

Just a carry over from the MX forum. Quick test run on

harry@biker:~
$ inxi -Fxz
System:
  Host: biker Kernel: 4.20.12-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc v: 6.3.0 
  Desktop: IceWM 1.4.2 Distro: antiX-17_x64-full Heather Heyer 24 October 2017 
  base: Debian GNU/Linux 9 (stretch) 
Machine:
  Type: Desktop System: Google product: Parrot v: 1.0 serial: <filter> 
  Mobo: Google model: Parrot v: 1.0 serial: <filter> BIOS: coreboot 
  v: 4.0-6588-g4acd8ea-dirty date: 09/04/2014 
Battery:
  ID-1: BATX charge: 31.3 Wh condition: 31.3/37.0 Wh (85%) model: SANYO AL12B32 
  status: Full 
CPU:
  Topology: Dual Core model: Intel Celeron 1007U bits: 64 type: MCP arch: Ivy Bridge 
  rev: 9 L2 cache: 2048 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 5986 
  Speed: 1259 MHz min/max: 800/1500 MHz Core speeds (MHz): 1: 815 2: 974 
Graphics:
  Device-1: Intel 3rd Gen Core processor Graphics driver: i915 v: kernel 
  bus ID: 00:02.0 
  Display: server: X.Org 1.19.2 driver: modesetting unloaded: fbdev,vesa 
  resolution: 1366x768~60Hz 
  OpenGL: renderer: Mesa DRI Intel Ivybridge Mobile v: 3.3 Mesa 13.0.6 
  direct render: Yes 
Audio:
  Device-1: Intel 7 Series/C216 Family High Definition Audio driver: snd_hda_intel 
  v: kernel bus ID: 00:1b.0 
  Sound Server: ALSA v: k4.20.12-antix.1-amd64-smp 
Network:
  Device-1: Qualcomm Atheros AR9462 Wireless Network Adapter vendor: Foxconn 
  driver: ath9k v: kernel port: 0400 bus ID: 01:00.0 
  IF: wlan0 state: up mac: <filter> 
  Device-2: Broadcom and subsidiaries NetLink BCM57785 Gigabit Ethernet PCIe 
  vendor: Acer Incorporated ALI driver: tg3 v: 3.137 port: 0400 bus ID: 02:00.0 
  IF: eth0 state: down mac: <filter> 
Drives:
  Local Storage: total: 14.91 GiB used: 7.79 GiB (52.2%) 
  ID-1: /dev/sda vendor: SanDisk model: SSD U100 16GB size: 14.91 GiB 
Partition:
  ID-1: / size: 14.62 GiB used: 7.79 GiB (53.3%) fs: ext4 dev: /dev/sda1 
Sensors:
  System Temperatures: cpu: 50.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 132 Uptime: 2h 01m Memory: 3.79 GiB used: 1.04 GiB (27.4%) Init: SysVinit 
  runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.29

harry@biker:~
$ apt-cache policy midori
midori:
  Installed: 8.0-0.1~mx17+1
  Candidate: 8.0-0.1~mx17+1
  Version table:
 *** 8.0-0.1~mx17+1 100
        100 /var/lib/dpkg/status
     0.5.11-ds1-4+b1 500
        500 http://ftp.us.debian.org/debian stretch/main amd64 Packages

No crash yet. Midori complains about not being able to find gstreamer opengl plugin when ran in terminal and one tries to play a video. But I should mention

Commit Log for Wed Mar  6 19:17:07 2019

Installed the following packages:
libbrotli1 (1.0.5-2~bpo9+1~mx17+1)
libgstreamer-plugins-bad1.0-0 (1.10.4-1)
libjavascriptcoregtk-4.0-18 (2.22.7-1~mx17+1)
libpeas-1.0-0 (1.20.0-1+b1)
libpeas-common (1.20.0-1)
libpython3.5 (3.5.3-1+deb9u1)
libwebkit2gtk-4.0-37 (2.22.7-1~mx17+1)
libwoff1 (1.0.2-1~mx17+1)
midori (8.0-0.1~mx17+1)

and trying to fix youtube video I did

Commit Log for Wed Mar  6 19:26:29 2019

Installed the following packages:
gstreamer1.0-libav (1.10.4-1)

Bed thirty for me. Good nite bros.

Sometimes I drive a crooked road to get my mind straight.
Not all who Wander are Lost.
I'm not outa place. I'm from outer space.

Linux Registered User # 475019
How to Search for AntiX solutions to your problems

March 6, 2019 at 7:38 pm #19171

Forum Admin

rokytnji

Helpful

Forgot t include:

When I test. I enable the MX test repo in synaptic sources list. Hit reload. Install application. Then comment out MX test repo < untick the check box that was checked earlier to install the app > . Hit reload. Then close synaptic package manager.

Sometimes I drive a crooked road to get my mind straight.
Not all who Wander are Lost.
I'm not outa place. I'm from outer space.

Linux Registered User # 475019
How to Search for AntiX solutions to your problems

March 6, 2019 at 9:05 pm #19172

Moderator

caprea

Helpful

Is gstreamer1.0-plugins-bad installed ?

$ apt-cache policy gstreamer1.0-plugins-bad
gstreamer1.0-plugins-bad:
  Installiert:           1.10.4-1
  Installationskandidat: 1.10.4-1
  Versionstabelle:
 *** 1.10.4-1 500
        500 http://mirror.plusserver.com/debian/debian stretch/main amd64 Packages
        100 /var/lib/dpkg/status

March 7, 2019 at 8:13 am #19185

Forum Admin

rokytnji

Helpful

It was not. I went ahead and installed it. Youtube still errors out. Terminal does not throw a can’t find a opengl plugin error youtube. Just a ton of repeat gtk errors anymore while runnig midori. Changing my gtk theme to Arc Dark did not stop the gtk error readouts.

harry@biker:~
$ midori

(midori:5216): GLib-CRITICAL **: g_regex_match_full: assertion 'string != NULL' failed

(midori:5216): Gtk-WARNING **: Allocating size to GtkPaned 0x55bdf81b2800 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?
<snip> over and over ^^^

Was worth a shot. Thanks.

Sometimes I drive a crooked road to get my mind straight.
Not all who Wander are Lost.
I'm not outa place. I'm from outer space.

Linux Registered User # 475019
How to Search for AntiX solutions to your problems

March 7, 2019 at 11:37 pm #19199

Member

andfree

Helpful

rokytnji wrote:

I enable the MX test repo in synaptic sources list.

I can’t find it.

March 8, 2019 at 5:58 am #19222

Anonymous

Helpful

Check all of the files in /etc/apt in your file manager.
Make a couple of screenshots of what you found.

March 8, 2019 at 7:45 am #19229

Member

andfree

Helpful

$ dir /etc/apt
apt.conf    preferences.d  sources.list.d  trusted.gpg
apt.conf.d  sources.list   trustdb.gpg	   trusted.gpg.d

$ dir /etc/apt/sources.list.d
antix.list	     debian.list		 onion.list
antix.list.dpkg-old  debian-stable-updates.list  various.list

See the contents of every list in the attachment.

Attachments:

lists.txt

March 8, 2019 at 8:30 am #19232

Anonymous

Helpful

Then you open antix.list in Terminal with:

sudo /etc/apt/sources.list.d/antix.list

In second out of three groups, you should find it.

You are looking for the line with “… stretch test” at the end:

# MX Community Main and Test Repos
deb http://nl.mxrepo.com/mx/repo/ stretch main non-free
#deb http://nl.mxrepo.com/mx/testrepo/ stretch test

… and you TEMPORARILY remove ‘#’ at the beginning of the line.

No sign == enabled; With sign == disabled

You don’t want the one starting with ‘src-deb’, but the one that has only ‘deb…’ at the beginning.

Part (path) before may vary, depending on your configuration (from which repo you are downloading from).

After you removed ‘#’ and saved the file, you open the Terminal and execute:

sudo apt-get update
sudo apt-get install ... whatever you're trying to install

After you’re done, you repeat the process and DISABLE (set ‘#’ at the beginning of the line) the testing repository again and execute:

sudo apt-get update

Now your antiX forgot about testing again.

March 8, 2019 at 8:41 am #19235

Moderator

caprea

Helpful

Hi andfree,
you will not find the mxtest-repo in any of your lists.

You have to edit your /etc/apt/sources.list.d
I placed it in the various list.

deb http://la.mxrepo.com/mx/testrepo/ stretch test

You also have to download the keyring_all.deb for the repo and install it manually with gdebi for example

http://la.mxrepo.com/mx/repo/pool/main/m/mx-archive-keyring/

midori runs fine here on antiX besides the gtk-errors roky mentioned.

Please dont forget to disable the test-repo after the installation of midori !

This reply was modified 4 years, 2 months ago by caprea.

March 8, 2019 at 1:28 pm #19249

Member

andfree

Helpful

Thanks for your help. Indeed, no mx testrepo in any of my lists. I placed it in the various list, too. I installed gdebi and used it to install the keyring_all.deb for the repo. I used Synaptic to install midori 8. After all, I unticked the check box for the mx testrepo and hit reload.

Unfortunately, midori doesn’t run fine on this antiX system. Pages seem to be loaded but, at the end, only a blank page is displayed.

$ midori

(midori:2441): GLib-CRITICAL **: g_regex_match_full: assertion 'string != NULL' failed

(midori:2441): Gtk-WARNING **: Allocating size to GtkPaned 0x1af2430 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?

** (midori:2441): CRITICAL **: session.vala:278: Failed add tab to session database: Invalid type '(null)' in statement: 
                INSERT INTO tabs (crdate, tstamp, session_id, uri, title)
                VALUES (:crdate, :tstamp, :session_id, :uri, :title)
                

(midori:2441): Gtk-WARNING **: Allocating size to GtkPaned 0x1af2430 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?

(midori:2441): Gtk-WARNING **: Allocating size to GtkPaned 0x1af2430 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?

(midori:2441): Gtk-WARNING **: Allocating size to GtkPaned 0x1af2430 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?

(midori:2441): Gtk-WARNING **: Allocating size to GtkPaned 0x1af2430 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?

$ inxi -Fxz
System:    Host: ts2450s203 Kernel: 4.9.160-antix.2-486-smp i686 bits: 32 compiler: gcc v: 6.3.0 Desktop: IceWM 1.4.2 
           Distro: antiX-17_386-base Heather Heyer 24 October 2017 base: Debian GNU/Linux 9 (stretch) 
Machine:   Type: Laptop System: TOSHIBA product: Satellite 2450 v: PS245E-03TE0-GK serial: <filter> 
           Mobo: TOSHIBA model: Portable PC v: Version A0 serial: <filter> BIOS: TOSHIBA v: Version 1.30 date: 03/20/2003 
CPU:       Topology: Single Core model: Intel Pentium 4 bits: 32 type: MCP arch: Netburst Northwood rev: 7 L2 cache: 512 KiB 
           flags: pae sse sse2 bogomips: 5586 
           Speed: 2793 MHz min/max: N/A Core speed (MHz): 1: 2793 
Graphics:  Device-1: NVIDIA NV17M [GeForce4 420 Go] vendor: Toshiba America Info Systems driver: nouveau v: kernel 
           bus ID: 01:00.0 
           Display: server: X.Org 1.19.2 driver: nouveau unloaded: fbdev,modesetting,vesa resolution: 1024x768~60Hz 
           OpenGL: renderer: Mesa DRI nv17 x86/MMX/SSE2 v: 1.2 Mesa 13.0.6 direct render: Yes 
Audio:     Device-1: Intel 82801DB/DBL/DBM AC97 Audio vendor: Toshiba America Info Systems driver: snd_intel8x0 v: kernel 
           bus ID: 00:1f.5 
           Sound Server: ALSA v: k4.9.160-antix.2-486-smp 
Network:   Device-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Toshiba America Info Systems 
           driver: 8139too v: 0.9.28 port: ce00 bus ID: 02:09.0 
           IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 93.16 GiB used: 49.13 GiB (52.7%) 
           ID-1: /dev/sda vendor: Toshiba model: MK1032GAX size: 93.16 GiB 
Partition: ID-1: / size: 81.32 GiB used: 49.13 GiB (60.4%) fs: ext4 dev: /dev/sda1 
           ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 65.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Info:      Processes: 116 Uptime: 23m Memory: 1002.8 MiB used: 271.6 MiB (27.1%) Init: SysVinit runlevel: 5 Compilers: 
           gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.29

This reply was modified 4 years, 2 months ago by andfree.
This reply was modified 4 years, 2 months ago by andfree.

March 8, 2019 at 2:30 pm #19252

Moderator

caprea

Helpful

Yes, I’ve seen this also.What I did after installation is, went into the settings in the upper right corner and changed the startpage and side which opens at start. First I had the impression this doesn’t help, but suddenly it worked somehow.

March 8, 2019 at 3:44 pm #19254

Member

cyrilus31

Helpful

Same here. antiX and MX forums work but many websites display a white page.

And compared to Palemoon, Midori uses 100% of my cpu.

This reply was modified 4 years, 2 months ago by cyrilus31.

March 8, 2019 at 3:58 pm #19256

Moderator

caprea

Helpful

cyrilus31,
cpu usage here is the same like firefox.
Which side does not open for example ?
Seems to work here, but didn’t use it so much.
Youtube works after installing gstreamer1.0-plugins-bad.
Did you try it on MX already ?

Also, this is not on a clean installation. I’ve installed some other browsers here.Maybe something was pulled in by another browser, which is missing on your installation.

This reply was modified 4 years, 2 months ago by caprea.

March 9, 2019 at 7:19 am #19266

Member

cyrilus31

Helpful

Hi Caprea
I just tried on my MX instal on the same laptop. Almost same behavior except CPU is not always stuck at 100%.
MX forum works perfectly and CPU use is normal.
I had to deactive scripts in Midori settings to open antixforum and login page freezes my PC for a long time.
Many sites display a white page (e.g lesnumeriques.com)

$ inxi -F
System:    Host: Inspiron5100 Kernel: 4.15.9-antix.1-686-smp-pae i686 bits: 32 
           Desktop: Xfce 4.12.3 Distro: MX-18.1_386 Continuum December 10  2017 
Machine:   Type: Portable System: Dell product: Inspiron 5100 v: N/A serial: <root required> 
           Mobo: Dell model: 09U808 serial: <root required> BIOS: Dell v: A31 date: 08/26/2004 
Battery:   ID-1: BAT0 charge: 95.5 Wh condition: 45.9/95.5 Wh (48%) 
CPU:       Topology: Single Core model: Intel Pentium 4 bits: 32 type: MCP L2 cache: 512 KiB 
           Speed: 2392 MHz min/max: N/A Core speed (MHz): 1: 2392 
Graphics:  Device-1: AMD RV200/M7 [Mobility Radeon 7500] driver: radeon v: kernel 
           Display: x11 server: X.Org 1.19.2 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1024x768_60.00~60Hz 
           OpenGL: renderer: Mesa DRI R100 (RV200 4C57) x86/MMX/SSE2 DRI2 v: 1.3 Mesa 18.2.6 
Audio:     Device-1: Intel 82801DB/DBL/DBM AC97 Audio driver: snd_intel8x0 
           Sound Server: ALSA v: k4.15.9-antix.1-686-smp-pae 
Network:   Device-1: Broadcom Limited BCM4401 100Base-T driver: b44 
           Device-2: Broadcom Limited BCM4306 802.11b/g Wireless LAN driver: b43-pci-bridge 
           IF-ID-1: eth0 state: down mac: 00:0d:56:36:c7:f0 
           IF-ID-2: wlan0 state: up mac: 00:11:50:3a:6c:08 
Drives:    Local Storage: total: 149.05 GiB used: 8.01 GiB (5.4%) 
           ID-1: /dev/sda vendor: Samsung model: HM160HC size: 149.05 GiB 
Partition: ID-1: / size: 28.74 GiB used: 8.01 GiB (27.9%) fs: ext4 dev: /dev/sda3 
Sensors:   System Temperatures: cpu: 50.0 C mobo: N/A 
           Fan Speeds (RPM): cpu: 3094 
Info:      Processes: 150 Uptime: 55m Memory: 1.97 GiB used: 276.6 MiB (13.7%) Shell: bash 
           inxi: 3.0.29

This reply was modified 4 years, 2 months ago by cyrilus31.

March 9, 2019 at 1:01 pm #19269

Member

andfree

Helpful

Similar behavior here. MX forum works. Deactiving scripts opened antiX forum, but I can’t login. Other sites still display a white page.

Author

Posts

Viewing 15 posts - 1 through 15 (of 28 total)

1 2 →

You must be logged in to reply to this topic.

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.