not work shift for sellect multi filles

[Member dimz]

please see previous discussion το ΜΧ-linuxforum…

https://forum.mxlinux.org/viewtopic.php?f=40&t=52490

$ inxi -zv7
System:
Host: antix1dim Kernel: 4.9.160-antix.2-486-smp i686 bits: 32 compiler: gcc v: 6.3.0
Desktop: IceWM 1.4.2 info: icewmtray dm: SLiM 1.3.4
Distro: antiX-17.4.1_386-full Helen Keller 28 March 2019
base: Debian GNU/Linux 9 (stretch)
Machine:
Type: Laptop System: Hewlett-Packard product: HP Compaq 6730b (GW687AV) v: F.08
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: Hewlett-Packard model: 30DD v: KBC Version 96.18 serial: <filter>
BIOS: Hewlett-Packard v: 68PDD Ver. F.08 date: 09/18/2008
Battery:
ID-1: BAT0 charge: 45.7 Wh condition: 46.5/46.5 Wh (100%) volts: 12.5/11.1
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Unknown
Memory:
RAM: total: 1.90 GiB used: 677.8 MiB (34.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Dual Core model: Intel Core2 Duo P8400 bits: 64 type: MCP arch: Penryn
rev: 6 L2 cache: 3072 KiB bogomips: 9044
Speed: 1600 MHz min/max: 800/2267 MHz Core speeds (MHz): 1: 1600 2: 1600
Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 de
ds_cpl dtes64 dtherm dts est flexpriority fpu fxsr ht lahf_lm lm mca mce mmx monitor
msr mtrr nx pae pat pbe pdcm pebs pge pni pse pse36 sep smx ss sse sse2 sse4_1 ssse3
tm tm2 tpr_shadow tsc vme vmx vnmi xtpr
Graphics:
Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Hewlett-Packard
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:2a42
Display: server: X.Org 1.19.2 driver: modesetting unloaded: fbdev,vesa
resolution: 1280×800~60Hz
OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2 v: 2.1 Mesa 13.0.6
direct render: Yes
Audio:
Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 00:1b.0 chip ID: 8086:293e
Sound Server: ALSA v: k4.9.160-antix.2-486-smp
Network:
Device-1: Broadcom Limited BCM4312 802.11b/g LP-PHY vendor: Hewlett-Packard
driver: wl v: kernel port: 6000 bus ID: 02:00.0 chip ID: 14e4:4315
IF: wlan0 state: up mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> scope: link
Device-2: Broadcom Limited NetLink BCM5787M Gigabit Ethernet PCI Express
vendor: Hewlett-Packard driver: tg3 v: 3.137 port: 6000 bus ID: 85:00.0
chip ID: 14e4:1693
IF: eth0 state: down mac: <filter>
WAN IP: <filter>
Drives:
Local Storage: total: 126.33 GiB used: 6.23 GiB (4.9%)
ID-1: /dev/sda vendor: Toshiba model: MK1252GSX size: 111.79 GiB speed: 3.0 Gb/s
serial: <filter> rev: 1C scheme: MBR
ID-2: /dev/sdb type: USB vendor: Toshiba model: TransMemory size: 14.53 GiB
serial: <filter> rev: PMAP scheme: MBR
Optical-1: /dev/sr0 vendor: Optiarc model: DVD-ROM DDU820S rev: MH04
dev-links: cdrom,dvd
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: none state: running
RAID:
Message: No RAID data was found.
Partition:
ID-1: / size: 17.40 GiB used: 3.64 GiB (20.9%) fs: ext4 dev: /dev/sda3
label: rootantiX17.4.1 uuid: 3820c3bb-0b7f-447b-9b6f-547a4c7e1a7d
ID-2: /home size: 20.84 GiB used: 2.54 GiB (12.2%) fs: ext4 dev: /dev/sda4
label: homeantiX uuid: f01c1ec2-fb66-49b9-b5c5-e5fddc12f018
ID-3: /media/-rw size: 11.66 GiB used: 40.0 MiB (0.3%) fs: ext4 dev: /dev/sdb5
label: -rw uuid: 3cd1ace9-6a9d-43a0-933e-a1a45fd7793d
ID-4: /media/MX-Live raw size: 1.41 GiB size: <root required> used: <root required>
fs: iso9660 dev: /dev/sdb4 label: MX-Live uuid: 2019-10-21-17-35-05-00
ID-5: /media/usbboot size: 240.2 MiB used: 7.0 MiB (2.9%) fs: vfat dev: /dev/sdb3
label: usbboot uuid: 3055-742E
ID-6: /media/usbdata size: 1.03 GiB used: 5.8 MiB (0.6%) fs: ntfs dev: /dev/sdb1
label: usbdata uuid: 0504B837002B90F5
ID-7: swap-1 size: 6.52 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5 label: N/A
uuid: 40ccc468-e3a5-4544-82b8-ee84ab6df0b5
Unmounted:
ID-1: /dev/sda1 size: 1 KiB fs: <root required> label: N/A uuid: N/A
ID-2: /dev/sda2 size: 46.57 GiB fs: ext4 label: N/A
uuid: 743f0e89-2ac8-42cb-a66d-bbef565e1ecc
ID-3: /dev/sda6 size: 18.62 GiB fs: ext4 label: N/A
uuid: d478de32-5949-4f6f-b9d3-aabeaaf9bcc9
ID-4: /dev/sdb2 size: 1 KiB fs: <root required> label: N/A uuid: N/A
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Device-1: 2-5:2 info: Toshiba Kingston DataTraveler 102/2.0 / HEMA Flash Drive 2 GB
/ PNY Attache 4GB Stick
type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s
chip ID: 0930:6545 serial: <filter>
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Device-2: 3-1:2 info: HP Bluetooth 2.0 Interface [Broadcom BCM2045] type: Bluetooth
driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip ID: 03f0:171d
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Sensors:
System Temperatures: cpu: 50.0 C mobo: 43.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 161 Uptime: 1h 08m Init: SysVinit v: 2.88 runlevel: 5 default: 5
Compilers: gcc: 6.3.0 alt: 6 Shell: bash v: 4.4.12 running in: lxterminal
inxi: 3.0.36

[Moderator BobC]

Helpful

Up

0

::

How I do it in Spacefm:

Click View, Preferences, make sure Single click opens files is not checked (see pic)

Left click the file panel with the files.

Left click one time the first file. It will change color.

Now press and hold down the shift key. Left click one time the last file. Let shift key up. Now all the files from first to last will be changed color.

Now press and hold Ctrl key. Now left click one more file outside of your selected list. Let Ctrl key up. Now your list plus the one other file will be selected.

You can Right click and choose what you want to do for all the selected ones, now

Attachments:

1. 

   spacefm-preferences.jpg
   

[Author]

Posts