- This topic has 6 replies, 2 voices, and was last updated Aug 24-7:16 am by olsztyn.
-
Posts
-
olsztyn
I am trying to install Open Drive listed under ‘Network’ in Package Installer. However after multiple tries I am still unsuccessful. Install appears to start apt-get but then just hangs. antiX 19.2, of course…
Any help will be greatly appreciated.Live antiX Boot Options (Previously posted by Xecure):
https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_Parameters
Xecure
Starnge. It also hangs on me. When trying to then use the terminal it says dpkg is locked.
Reboot and try it manually. All instructions are in the /usr/share/packageinstaller-pkglist/odrive.pm
I will post them here for you in case you cannot find them.
Open a terminal and paste:wget https://github.com/liberodark/ODrive/releases/download/0.2.1/odrive_0.2.1_amd64.deb sudo apt-get install ./odrive_0.2.1_amd64.deb rm odrive_0.2.1_amd64.debantiX Live system enthusiast.
General Live Boot Parameters for antiX.Reboot and try it manually
Thank you Xecure!
Looks like a dependency problem:
$ sudo apt-get install ./odrive_0.2.1_amd64.debWe trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.[sudo] password for demo:
Reading package lists… Done
Building dependency tree
Reading state information… Done
Note, selecting ‘odrive’ instead of ‘./odrive_0.2.1_amd64.deb’
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:The following packages have unmet dependencies:
odrive : Depends: libappindicator1 but it is not installable
E: Unable to correct problems, you have held broken packages.
demo@antix1:~
$
Thanks and Regards…Live antiX Boot Options (Previously posted by Xecure):
https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_ParametersXecure
I did get to install it manually:
sudo apt-get install ./odrive_0.2.1_amd64.deb Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'odrive' instead of './odrive_0.2.1_amd64.deb' The following package was automatically installed and is no longer required: libqt5script5 Use 'sudo apt autoremove' to remove it. The following additional packages will be installed: libappindicator1 libdbusmenu-gtk4 libindicator7 The following NEW packages will be installed: libappindicator1 libdbusmenu-gtk4 libindicator7 odrive 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 152 kB/56.5 MB of archives. After this operation, 275 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://ftp.us.debian.org/debian buster/main amd64 libdbusmenu-gtk4 amd64 18.10.20180917~bzr490+repack1-1 [45.7 kB] Get:2 /home/demo/odrive_0.2.1_amd64.deb odrive amd64 0.2.1 [56.4 MB] Get:3 http://ftp.us.debian.org/debian buster/main amd64 libindicator7 amd64 0.5.0-4 [53.0 kB] Get:4 http://ftp.us.debian.org/debian buster/main amd64 libappindicator1 amd64 0.4.92-7 [53.3 kB] Fetched 152 kB in 1s (152 kB/s) Selecting previously unselected package libdbusmenu-gtk4:amd64. (Reading database ... 119945 files and directories currently installed.) Preparing to unpack .../libdbusmenu-gtk4_18.10.20180917~bzr490+repack1-1_amd64.deb ... Unpacking libdbusmenu-gtk4:amd64 (18.10.20180917~bzr490+repack1-1) ... Selecting previously unselected package libindicator7:amd64. Preparing to unpack .../libindicator7_0.5.0-4_amd64.deb ... Unpacking libindicator7:amd64 (0.5.0-4) ... Selecting previously unselected package libappindicator1:amd64. Preparing to unpack .../libappindicator1_0.4.92-7_amd64.deb ... Unpacking libappindicator1:amd64 (0.4.92-7) ... Selecting previously unselected package odrive. Preparing to unpack .../demo/odrive_0.2.1_amd64.deb ... Unpacking odrive (0.2.1) ... Setting up libindicator7:amd64 (0.5.0-4) ... Setting up libdbusmenu-gtk4:amd64 (18.10.20180917~bzr490+repack1-1) ... Setting up libappindicator1:amd64 (0.4.92-7) ... Setting up odrive (0.2.1) ... Processing triggers for mime-support (3.62) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for libc-bin (2.28-10) ... Processing triggers for desktop-file-utils (0.23-4) ... Writing Menu: fluxbox Writing Menu: icewm Writing Menu: jwmI am using a live antiX 19.2.1 base x64. The only thing changed is the repo mirror.
antiX Live system enthusiast.
General Live Boot Parameters for antiX.The only thing changed is the repo mirror.
Can you shed some light on what repo mirror worked?
Thanks and Regards…Live antiX Boot Options (Previously posted by Xecure):
https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_ParametersXecure
Can you shed some light on what repo mirror worked?
I am not really sure which is being selected. When I launch a live system in a VM, the first thing I do after changing keyboard layout is to launch Repo manager and auto-select fastest mirror for antiX and Debian repos. As I don’t live in the USA it usually selects some European mirror, but I really don’t pay attention to which. After that I update and upgrade the live system.
odrive : Depends: libappindicator1 but it is not installable
It is definitely a Debian mirror issue, as Debian lists this package in their site:
https://packages.debian.org/search?keywords=libappindicator1&searchon=names&suite=buster§ion=allantiX Live system enthusiast.
General Live Boot Parameters for antiX.It is definitely a Debian mirror issue, as Debian lists this package in their site:
Thanks for identifying this. I will try to VPN connect to Europe (I think Frankfurt should be good choice) and see if it works this time.
Thanks and Regards.Live antiX Boot Options (Previously posted by Xecure):
https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_Parameters
- You must be logged in to reply to this topic.
