Panasonic E3 Tablet 32-bit UEFI etc.

Forum Forums Official Releases antiX-17 “Heather Heyer” Panasonic E3 Tablet 32-bit UEFI etc.

  • This topic has 1 reply, 1 voice, and was last updated Nov 27-12:58 pm by tbuser48.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #2374

    Here it is in all it’s glory.

    System: Host: antix1 Kernel: 4.10.5-antix.1-486-smp i686 bits: 32 gcc: 6.3.0
    Desktop: IceWM 1.4.2 Distro: antiX-17_386-full Heather Heyer 24 October 2017
    Machine: Device: un-determined System: 3E product: Education PC by 3E v: 0.1 serial: N/A
    Mobo: Intel model: Intel powered classmate PC v: FAB1 serial: N/A
    UEFI: Phoenix v: PHBYT10A.86A.0034.2015.0724.1722 date: 07/24/2015
    Battery BAT1: charge: 13.3 Wh 100.1% condition: 13.3/13.3 Wh (100%)
    model: ECS CMPC status: N/A
    BAT2: charge: 3.6 Wh 26.4% condition: 13.6/15.9 Wh (86%)
    model: ECS CMPC status: Charging
    CPU: Quad core Intel Atom Z3745D (-MCP-) arch: Silvermont rev.8 cache: 1024 KB
    flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10662
    clock speeds: max: 1832 MHz 1: 1832 MHz 2: 1832 MHz 3: 1832 MHz 4: 1832 MHz
    Graphics: Card: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
    bus-ID: 00:02.0
    Display Server: X.Org 1.19.2 drivers: modesetting (unloaded: fbdev,vesa)
    Resolution: 1366×768@60.00hz
    OpenGL: renderer: Mesa DRI Intel Bay Trail x86/MMX/SSE2
    version: 3.3 Mesa 13.0.6 Direct Render: Yes
    Audio: Card bytcr-rt5640 driver: bytcr-rt5640
    Sound: Advanced Linux Sound Architecture v: k4.10.5-antix.1-486-smp
    Network: Card: Failed to Detect Network Card!
    Drives: HDD Total Size: 16.0GB (6.5% used)
    ID-1: /dev/mmcblk2 model: N/A size: 62.5GB
    ID-2: USB /dev/sda model: Cruzer_Fit size: 16.0GB
    Partition: ID-1: / size: 1.5G used: 169M (12%) fs: overlay dev: N/A
    ID-2: swap-1 size: 1.07GB used: 0.00GB (0%) fs: swap dev: /dev/mmcblk2p3
    Sensors: System Temperatures: cpu: 58.0C mobo: N/A
    Fan Speeds (in rpm): cpu: N/A
    Info: Processes: 175 Uptime: 3:21 Memory: 548.1/1849.2MB
    Init: SysVinit runlevel: 5 Gcc sys: 6.3.0
    Client: Shell (bash 4.4.121) inxi: 2.3.40

    1. Priority is to have the keyboard and touchpad work after grub or efi grub menu. Antix 17 is the first one to work most of the time. I’d like to be able to use the text menu. Keyboard is controlled by PNP0501 and is i2C and hid? (NOT USB NOR PS/2)
    2. Another problem is sound. As in none.

    These ran UEFI W 8.1….actually not bad for school kids. Two batteries, one for the keyboard section and one for the tablet. Works pretty slick with MX-16 or antiX in VM.

    it’s 32-bit, however a friend booted to MX-16 64-bit legacy. (with keyboard function) There is no choice for legacy per se in the bios.

    Control Center PCInfo says it’s 32 bit os and 64 bit cpu.

    I got the wireless working

    I’d really like to sort the keyboard and carry on from there.



    • This topic was modified 2 years, 6 months ago by tbuser48. Reason: typo

    A quick update.
    I have run the E3 on antiX17 live (64bit) and MX16 (64bit) Because esp requires 64 bit.

    Last night I installed antiX17. This after adding bootia32.efi to where shell can see it in the case of antiX17. (/EFI/Boot/bootia32.efi)

    antiX17 boots to grub>

    Run five or six lines in grub> and the hdd will boot. (/dev/mmcblk1p2)

    Keyboard doesn’t always work but I can get to the installed antiX17.

    1. Supergrub rescue disk will not boot.
    2. Sudo update-grub seems to work normally but on re-boot again goes to grub>

    So it kinda works.

    In grub should I be pointing it at the fat partition? /dev/mmcblk1p1 ???? EDIT: Nope.
    I’m wondering if the long (9 character device name is messing with the FAT portion) Boot repair tries to fix /dev/mmcblk11….dropping the p. Should be mmcblk1p1 which is where esp lives.



    • This reply was modified 2 years, 6 months ago by tbuser48.
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.