pipewire insatll problem

[Member drumanart]

Hello.
Release: 11
Codename: bullseye

I’d like to connect SuprCollider (uses ALSA) to connect to Bluetooth. As Bluetooth connects over PulseAudio I thought pipewire could solve the issue.
So I’m trying to install pipewire through the PPA following this link:https://trendoceans.com/enable-pipewire-and-disable-pulseaudio-in-ubuntu/
//

First I get a API key warning:
gpg: keybox ‘/tmp/tmpj7cm4o5n/pubring.gpg’ created
gpg: /tmp/tmpj7cm4o5n/trustdb.gpg: trustdb created
gpg: key 25088A0359807596: public key “Launchpad PPA for SOURAV DAS” imported
gpg: Total number processed: 1
gpg: imported: 1
Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (>
gpg: no valid OpenPGP data found.

Then when I try to install some libraries:

sudo apt install gstreamer1.0-pipewire libpipewire-0.3-{0,dev,modules} libspa-0>
Reading package lists… Done
Building dependency tree… Done
Reading state information… Done
Package pipewire-media-session is not available, but is referred to by another >
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
wireplumber:i386 wireplumber

E: Package ‘pipewire-media-session’ has no installation candidate
E: Unable to locate package pipewire-locales

//
pactl info
Server String: /run/user/1000/pulse/native
Library Protocol Version: 34
Server Protocol Version: 34
Is Local: yes
Client Index: 0
Tile Size: 65472
User Name: drumanart
Host Name: antix1
Server Name: pulseaudio
Server Version: 14.2
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Default Source: alsa_input.pci-0000_00_1b.0.analog-stereo
Cookie: 7204:9fb7

//
inxi -Fxz
System:
Kernel: 5.10.57-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc
v: 10.2.1 Desktop: Fluxbox v: 1.3.7
Distro: antiX-21_x64-full Grup Yorum 31 October 2021
base: Debian GNU/Linux 11 (bullseye)
Machine:
Type: Laptop System: LENOVO product: 23255NG v: ThinkPad X230
serial: <superuser required>
Mobo: LENOVO model: 23255NG serial: <superuser required>
UEFI-[Legacy]: LENOVO v: G2ETB3WW (2.73 ) date: 06/19/2018
Battery:
ID-1: BAT0 charge: 48.5 Wh (100.0%) condition: 48.5/71.3 Wh (68.1%)
volts: 12.5 min: 10.8 model: SANYO 45N1023 status: full
CPU:
Info: dual core model: Intel Core i5-3320M bits: 64 type: MT MCP
arch: Ivy Bridge rev: 9 cache: L1: 128 KiB L2: 512 KiB L3: 3 MiB
Speed (MHz): avg: 2828 high: 3201 min/max: 1200/3300 cores: 1: 3037
2: 2455 3: 2621 4: 3201 bogomips: 20752
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel 3rd Gen Core processor Graphics vendor: Lenovo driver: i915
v: kernel arch: Gen7 bus-ID: 00:02.0
Device-2: Chicony Integrated Camera type: USB driver: uvcvideo
bus-ID: 1-1.6:5
Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: modesetting
unloaded: fbdev,vesa gpu: i915 resolution: 1366×768~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2)
v: 4.2 Mesa 20.3.5 direct render: Yes
Audio:
Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Lenovo 7
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
Sound Server-1: ALSA v: k5.10.57-antix.1-amd64-smp running: yes
Sound Server-2: JACK v: 1.9.17 running: yes
Sound Server-3: PulseAudio v: 14.2 running: no
Network:
Device-1: Intel 82579LM Gigabit Network vendor: Lenovo driver: e1000e
v: kernel port: 6080 bus-ID: 00:19.0
IF: eth0 state: down mac: <filter>
Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi
v: kernel bus-ID: 03:00.0
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Broadcom BCM20702 Bluetooth 4.0 [ThinkPad] type: USB
driver: btusb v: 0.8 bus-ID: 1-1.4:4
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter>
bt-v: 2.1 lmp-v: 4.0
Drives:
Local Storage: total: 465.76 GiB used: 33.35 GiB (7.2%)
ID-1: /dev/sda vendor: HGST (Hitachi) model: HTS725050A7E630
size: 465.76 GiB
Partition:
ID-1: / size: 449.5 GiB used: 33.35 GiB (7.4%) fs: ext4 dev: /dev/sda1
Swap:
ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) dev: /dev/sda2
Sensors:
System Temperatures: cpu: 54.0 C mobo: 0.0 C
Fan Speeds (RPM): cpu: 3290
Info:
Processes: 174 Uptime: 7h 50m Memory: 15.32 GiB used: 1.58 GiB (10.3%)
Init: SysVinit runlevel: 5 Compilers: gcc: 10.2.1 clang: 11.0.1-2
Packages: 1947 Shell: Bash v: 5.1.4 inxi: 3.3.19

Thanks for help Martin

[Member stevesr0]

Helpful

Up

0

::

Hi drumanart,

I see you are running Debian not antiX and trying to use an Ubuntu PPA. Perhaps you would get useful advice on a Debian or Ubuntu forum?

stevesr0

[Author]

Posts