- This topic has 63 replies, 13 voices, and was last updated Feb 5-11:20 pm by Brian Masinick.
-
Posts
-
Brian Masinick
(2 minute outage seen just before posting this):
The inxi command works for me as a moderator, but the line:
Type: mmio_stale_data status: Not affected is probably tripping up the output.
Again, as Caprea suggests, an inxi -zv7 output should avoid the issue, e.g.:
inxi -zv7 System: Kernel: 6.1.4-x64v3-xanmod1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 Desktop: IceWM v: 3.3.0 vt: 4 dm: slimski v: 1.5.0 Distro: antiX-21-runit_x64-full Grup Yorum 30 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: HP product: HP Laptop 14-fq1xxx v: N/A serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: HP model: 887C v: 59.11 serial: <superuser required> UEFI: AMI v: F.18 date: 11/26/2021 Battery: ID-1: BAT0 charge: 40.6 Wh (99.8%) condition: 40.7/40.7 Wh (100.0%) volts: 12.9 min: 11.3 model: HP Primary type: Li-ion serial: <filter> status: not charging Memory: RAM: total: 7.11 GiB used: 1.62 GiB (22.9%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: 6-core model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64 type: MT MCP smt: enabled arch: Zen 2 rev: 1 cache: L1: 384 KiB L2: 3 MiB L3: 8 MiB Speed (MHz): avg: 1980 high: 2195 min/max: 1400/4056 boost: enabled cores: 1: 1397 2: 2195 3: 2100 4: 2100 5: 1397 6: 2100 7: 2100 8: 2100 9: 2100 10: 2100 11: 1976 12: 2100 bogomips: 50310 Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves Graphics: Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5.1 pcie: speed: 8 GT/s lanes: 16 ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:164c class-ID: 0300 temp: 47.0 C Device-2: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo bus-ID: 1-3:3 chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: eDP-1 mapped: eDP model: ChiMei InnoLux 0x1429 res: 1920x1080 hz: 60 dpi: 158 size: 309x173mm (12.17x6.81") diag: 354mm (13.9") modes: max: 1920x1080 min: 640x480 API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD RENOIR (DRM 3.49.0 6.1.4-x64v3-xanmod1 LLVM 11.0.1) direct render: Yes Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: speed: 8 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:1637 class-ID: 0403 Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard driver: snd_rn_pci_acp3x v: kernel pcie: speed: 8 GT/s lanes: 16 bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480 Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: speed: 8 GT/s lanes: 16 bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403 Sound API: ALSA v: k6.1.4-x64v3-xanmod1 running: yes Network: Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 01:00.0 chip-ID: 10ec:a85a class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-4:4 chip-ID: 0bda:385a class-ID: e001 serial: <filter> Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2 sub-v: 7644 hci-v: 5.2 rev: d99a Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 28.08 GiB (11.8%) ID-1: /dev/nvme0n1 vendor: Toshiba model: KBG40ZNV256G KIOXIA size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: HP00AE00 temp: 25.9 C scheme: GPT Message: No optical or floppy data found. Partition: ID-1: / size: 47.76 GiB used: 28.04 GiB (58.7%) fs: ext4 dev: /dev/nvme0n1p3 label: rootantiX21 uuid: e1d85e10-a42a-4ed5-a98e-c860607e6910 ID-2: /boot/efi size: 256 MiB used: 42.4 MiB (16.5%) fs: vfat dev: /dev/nvme0n1p1 label: SYSTEM uuid: 669B-9111 Swap: ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p6 label: N/A uuid: d5ee9225-6bf8-4ea5-9299-547b7272c289 Unmounted: ID-1: /dev/nvme0n1p2 size: 1000 MiB fs: vfat label: N/A uuid: E253-D9ED ID-2: /dev/nvme0n1p4 size: 48.83 GiB fs: ext4 label: N/A uuid: e346e37f-8388-4c6c-b17e-b6ecec4b9547 ID-3: /dev/nvme0n1p5 size: 48.83 GiB fs: ext4 label: N/A uuid: f4d82c2c-b2d1-4708-a9ca-3e777c72924e ID-4: /dev/nvme0n1p7 size: 35.09 GiB fs: ext4 label: siduction uuid: e8534128-4ce0-4849-8fc8-4d2a50d8d3e2 ID-5: /dev/nvme0n1p8 size: 47.85 GiB fs: ext4 label: endeavouros uuid: 9d4b3198-1d58-45a1-bd31-991af24ff71f USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-2:2 info: KYE Systems (Mouse Systems) Trackbar Emotion type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: 0458:0007 class-ID: 0301 Device-2: 1-3:3 info: Chicony HP TrueVision HD Camera type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b6f1 class-ID: 0e02 serial: <filter> Device-3: 1-4:4 info: Realtek Bluetooth Radio type: Bluetooth driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s power: 500mA chip-ID: 0bda:385a class-ID: e001 serial: <filter> Hub-2: 2-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 51.0 C mobo: N/A gpu: amdgpu temp: 47.0 C Fan Speeds (RPM): fan-1: 0 fan-2: 0 Info: Processes: 269 Uptime: 36m wakeups: 3612 Init: runit v: N/A runlevel: 2 Compilers: gcc: 10.2.1 alt: 10 Packages: pm: dpkg pkgs: 1811 Shell: Bash v: 5.1.4 running-in: roxterm inxi: 3.3.24--
Brian Masinick
caprea
2) There is a new button, “Mark all topics as read” that seemingly does nothing.”
Currently disabledUntil now it worked here when I tried it.
3) Reload the (main forum) page newly requires to confirm to resend the information or cancel/deny.
This behaviour wasn’t there always during the last hours, I’ve just seen it for the first time.
I think it is too early to form an opinion. It is all still in an experimental stage. As Brian Masinick already stated, the web master will be able to continue her help tomorrow.
Robin
the word data followed by colon does trigger it.
Many thanks for your great hint! That actually was the issue. I simply removed the colon from all instances, and submission worked fine after this.
Windows is like a submarine. Open a window and serious problems will start.
Xunzi_23
08:52 Amsterdam Time and following several more errors
shortly afterwards.Service Unavailable
The server is temporarily unable to service your request due to
maintenance downtime or capacity problems. Please try again later.Additionally, a 503 Service Unavailable error was encountered
while trying to use an ErrorDocument to handle the request.Brian Masinick
Our webmaster does plan on doing more work on the forum today.
Unfortunately I have several things that I am doing today so I won’t be monitoring as much as most weekdays.
--
Brian Masinickcaprea
There was a short outage some minutes ago
Service Unavailable
The server is temporarily unable …..
Additionally, a 503 Service Unavailable error …andfree
The list of the 5 latest posts that normally exists between the “Announcements” & the main body of the forum has disappeared.
sybok
Fri 13 Jan 2023 10:35:16 AM CET, Fri 13 Jan 2023 11:48:37 AM CET: Confirm as @andfree that the recent topics are still missing and also page reload requires confirmation.
Hhhm, Friday the 13th…
Brian Masinick
Fri 13 Jan 2023 10:35:16 AM CET, Fri 13 Jan 2023 11:48:37 AM CET: Confirm as @andfree that the recent topics are still missing and also page reload requires confirmation.
Hhhm, Friday the 13th…
Acknowledged by the webmaster, who is looking for the right plugins to provide both features and performance; it’s getting better, but the work is not yet quite complete. The outages have not been 100% wiped out (yet) but when I got on the forum this morning, I DID notice that the performance and response is the best I’ve seen it in at least 2-3 years, now comparable to other forums I visit; unfortunately I also saw one 503 outage this morning, but it was restarted in no more than 2 minutes.
Progress; not quite finished.
--
Brian MasinickNot an issue in literal sense, but a feature request, which possibly might help to reduce server load: Could the board get a “preview” functionality which shows the result of what is typed into the reply field before actually posting it? This would avoid multiple editing of a posting in short intervals after it was submitted initially. It is not that easy to see whether formatting was successfully done, especially when you have to write in a foreign language. Also spelling errors in foreign language are difficult to spot in between all the additional formatting codes. Hence the absence of this preview feature causes sometimes an posting needs to be edited 4 to 10 times in short intervals before all is fixed as intended, instead of submitting it a single time. Well, maybe the server load (or local system load from browser on weak machines) of a preview function could be worse than this type of short interval editing of postings immediately after initial posting, which would be contraproductive. This is something I don’t know and can’t decide. So please take it just a proposal.
Windows is like a submarine. Open a window and serious problems will start.
caprea
In the first two or three years of this forum it was displayed at the very bottom of the start page how many people are currently visiting the forum, how many are logged in and also who.
I found this feature interesting and miss it a bit.Brian Masinick
“Latest Activity” is back.
techore
Just want to confirm that Private Messages are not expected to be working.
I did a search but not finding anything current info on private messages, but I may have missed it.
Thank you!
caprea
Outage seen some minutes ago.
Service UnavailableThe server is ….
Additionally, a 503 Service Unavailable error was encountered…
- You must be logged in to reply to this topic.
