print preview with qpdfview for Geany, AbiWord, Gnumeric, …

Forum › Forums › General › Tips and Tricks › print preview with qpdfview for Geany, AbiWord, Gnumeric, …

  • This topic has 3 replies, 4 voices, and was last updated Jun 28-5:05 pm by olsztyn.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 27, 2022 at 8:03 pm #85290
    Member
    Xaver

      It took me quite a while to find out, that ‘%f’ is needed.
      Open /home/ ~/.config/gtk-3.0/settings.ini with an editor and add these lines:

      [Settings]
gtk-print-preview-command = qpdfview %f

      Now print preview should be working for geany, abiword, …

      • This topic was modified 10 months, 2 weeks ago by Xaver.
      June 28, 2022 at 5:15 am #85306
      Member
      Wallon
        Helpful
        Up
        0
        ::

        Dear Xaver,

        I didn’t use this feature in antiX anymore because it never worked with my HP printer.
        Now everything works fine.
        Thank you for this tip and trick.
        I hope this will be changed by the developers in the next ISO antix22.
        This is great!

        Best regards,
        Wallon

        June 28, 2022 at 5:23 am #85308
        Member
        madibi
          Helpful
          Up
          0
          ::

          Very, very nice!
          Thanks for the tip.
          m

          June 28, 2022 at 5:05 pm #85336
          Member
          olsztyn
            Helpful
            Up
            0
            ::
            Xaver wrote:

            Open /home/ ~/.config/gtk-3.0/settings.ini with an editor and add these lines:

            Very useful enhancement…
            Thank you Xaver…

            Live antiX Boot Options (Previously posted by Xecure):
            https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_Parameters

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.