Printer Won’t Print

[Member Marco_]

Hello,

Installed cups and system-config-printer.

Added Canon printer using generic driver (recommended).

Print test page – Shows printing of page with nothing left in queue.

No page printed

When using Mx Linux, I was able to print.

Any thoughts?

• This topic was modified 2 years, 11 months ago by Marco_.

[Member PPC]

Helpful

Up

0

::

@Marco_
Please post details about your printer model and antiX version you are running, so people here can try to provide help!

P.

[Member Marco_]

Helpful

Up

0

::

Canon f171900 MF230

Linux antix1 4.9.212-antix

PPC wrote:

@Marco_
Please post details about your printer model and antiX version you are running, so people here can try to provide help!

P.

• This reply was modified 2 years, 11 months ago by Marco_.
• This reply was modified 2 years, 11 months ago by Marco_.

[Forum Admin anticapitalista]

Helpful

Up

0

::

The antiX version is shown in a terminal cat /etc/antix-version

Philosophers have interpreted the world in many ways; the point is to change it.

antiX with runit - leaner and meaner.

[Forum Admin anticapitalista]

Helpful

Up

0

::

You might just need to reboot and try again.

Philosophers have interpreted the world in many ways; the point is to change it.

antiX with runit - leaner and meaner.

[Member Marco_]

Helpful

Up

0

::

anticapitalista wrote:

The antiX version is shown in a terminal cat /etc/antix-version

antiX-19.2.1_386-base Hannie Schaft 29 March 2020

anticapitalista wrote:

You might just need to reboot and try again.

Thanks, but no print after normal reinstall of apps, reboot, and test.

[Moderator caprea]

Helpful

Up

0

::

These are the packages I install on antiX-base systems to get my printers running, may help you.
cups cups-filters system-config-printer system-config-printer-udev printer-driver-gutenprint

[Member PPC]

Helpful

Up

0

::

Also, if all else fails, try this: open the printer’s properties and check if it’s not locked or blocled for any reason (happens to me, from time to time on my HP printer and that’s how I solve it).
Cannon offers, on their home page a Linux driver, for your kind of printer (it a 100 Mb package)- you can try that, but, if I were you I would do that on a live system first, just to check if installing the driver does not mess your system up…

P.

[Member Marco_]

Helpful

Up

0

::

caprea wrote:

These are the packages I install on antiX-base systems to get my printers running, may help you.
cups cups-filters system-config-printer system-config-printer-udev printer-driver-gutenprint

Thanks… will add the one I don’t have.

PPC wrote:

Also, if all else fails, try this: open the printer’s properties and check if it’s not locked or blocled for any reason (happens to me, from time to time on my HP printer and that’s how I solve it).
Cannon offers, on their home page a Linux driver, for your kind of printer (it a 100 Mb package)- you can try that, but, if I were you I would do that on a live system first, just to check if installing the driver does not mess your system up…

P.

Thanks…properties look good. Please post a link for driver as I couldn’t find it.

• This reply was modified 2 years, 11 months ago by Marco_.
• This reply was modified 2 years, 11 months ago by Marco_.

[Member Marco_]

Helpful

Up

0

::

I installed all software suggested rebooted and tested. Still no print. Will use other pc for printing.
Thanks

[Member ModdIt]

Helpful

Up

0

::

Hi Marco, generic driver sounds somewhat unusual for a canon printer.
if you still have the possibility to print from MX, pls check which PPD is in use.
http://localhost:631/printers/ should bring you to the right page in CUPS. Several times we have been
able to fix canon issues that were caused by wrong PPD (Driver/printer process descriptor) file being
suggested by the system.

In one case we had to extract a driver from the windoze driver package and add it to CUPS.

In your case if you have working setup the PPD should be in MX /etc/cups/ppd.
You may find more useful information in the setup files found in the directory.

• This reply was modified 2 years, 11 months ago by ModdIt.

[Member Marco_]

Helpful

Up

0

::

ModdIt wrote:

Hi Marco, generic driver sounds somewhat unusual for a canon printer.
if you still have the possibility to print from MX, pls check which PPD is in use.
http://localhost:631/printers/ should bring you to the right page in CUPS. Several times we have been
able to fix canon issues that were caused by wrong PPD (Driver/printer process descriptor) file being
suggested by the system.

In one case we had to extract a driver from the windoze driver package and add it to CUPS.

In your case if you have working setup the PPD should be in MX /etc/cups/ppd.
You may find more useful information in the setup files found in the directory.

I will do as U suggested and post back. Thanks

[Member Marco_]

Helpful

Up

0

::

@Moddit

I have the working MXLinux system available for trouble shooting.

Please tell me what you need to know to continue with “printer won’t print”.

Thank you

• This reply was modified 2 years, 10 months ago by Marco_.

[Member Marco_]

Helpful

Up

0

::

MX /etc/cups/ppd

Canon_MF230.ppd

If MXLinux can find it, then I’m sure we can make it work.

• This reply was modified 2 years, 10 months ago by Marco_.
• This reply was modified 2 years, 10 months ago by Marco_.

[Member PPC]

Helpful

Up

0

::

Hi, sorry for the delay: here are the links to the driver my google search came up with:

https://www.canon-europe.com/support/consumer_products/products/fax__multifunctionals/laser/laserbase_mf_series/i-sensys_mf232w.html?type=drivers&language=en&os=linux%20(32-bit)

Note: it’s says it’s for “mf232w” not “mf232”

and

https://en.printerdriver.org/canon-mf230-driver/

I did not test any of this (I have no canon printer) and the second link does not look official, so beware of it…
If you want to test any of this, try it on a virtual system or running antiX live, to be on the safe side.

P.

[Author]

Posts