Remasterização do antiX 21 Full de 32 e 64 bits com o Kernel 4.4.0-296

[Member marcelocripe]

Prezados.

É com grande satisfação que compartilho a minha primeira remasterização do antiX 21 com o Kernel 4.4.0-296.

As duas remasterizações foram feitas a partir das imagens ISO “antiX-21_386-full.iso” e “antiX-21_x64-full.iso”, ambas com o sistema de inicialização de serviços SysVinit.

O objetivo destas remasterizações é de podermos ter disponíveis o antiX 21 de 32 bits e 64 bits prontos para inicializar com o Kernel 4.4.0-296. Eu removi os outros dois núcleos, o Kernel 4.9.0-279 e o Kernel 5.10.57.

Apesar do anúncio do @anticapitalista, no dia 07 de fevereiro de 2022, sobre o fim da vida útil do kernel 4.4, no tópico em idioma Inglês 4.4 kernel has reached EOL (End of life), o Kernel 4.4 é o que consegue inicializar na maioria das placas-mães que possuem placa de vídeo SIS e Via.

A única alteração que eu fiz, além do Kernel, foi corrigir o texto que é exibido no submenu do “Menu Pessoal”, ou seja, onde está escrito “Vídeos de Ajuda do Menu Pessoal” na ISO original do antiX, eu alterei para “Vídeo de Ajuda do Menu Pessoal” em idioma Português do Brasil. Infelizmente, no passado, eu enviei o texto no plural para o @anticapitalista, pois eu achava que seriam vários vídeos e na verdade é apenas um vídeo ensinando como adicionar ou remover os submenus do “Menu Pessoal”.

Estas remasterizações estão muito aquém das ISOs pseudo-antix-19 legacy bet3 com Kernel 4.4.0-264 que o @Xecure construiu a partir do “Build-iso”, que eu não tenho a mínima ideia de como utilizar o “Build-iso”.

Eu gostaria de agradecer a todas as pessoas que compartilham os seus conhecimentos para o bem das outras pessoas aqui no fórum. Aproveito para fazer um agradecimento especial ao @ensabahnur, o criador do respin Pin Linux OS, que me guiou e me ensinou a fazer cada etapa da remasterização destas ISOs, sem estes ensinamentos, estas ISOs não existiriam. Muito obrigado, @ensabahnur. Eu agradeço também ao @anticapitalista, aos desenvolvedores, aos programadores, aos tradutores voluntários, aos testadores e a todas as pessoas que contribuem de alguma forma com este sistema operacional GNU/Linux fantástico que é o antiX.

Obs.: Apesar deste tópico estar na área em idioma Português, eu irei incluir a tradução automática para o idioma Inglês.  

marcelocripe
(Texto original em idioma Português do Brasil)

– – – – –

Esteemed.

It is with great satisfaction that I share my first remastering of antiX 21 with kernel 4.4.0-296.

The two remasters were made from the ISO images “antix-21_386-full.iso” and “antix-21_x64-full.iso”, both with the SysVinit service boot system.

The purpose of these remasters is that we can have available antiX 21 bits and 64 bits ready to boot with Kernel 4.4.0-296. I removed the other two cores, kernel 4.9.0-279 and kernel 5.10.57.

Despite the announcement of the @anticapitalist, on February 7, 2022, on the end of Kernel 4.4, in the topic in English language 4.4 kernel has reached EOL (End of life), Kernel 4.4 is what you can initialize on most plates-mothers who have a board video sis and via.

The only change I did, in addition to the kernel, it was to correct the text that is displayed in the “Menu Pessoal” submenu, that is, where it is written “Vídeos de Ajuda do Menu Pessoal” in antiX’s original ISO, I changed to “Vídeo de Ajuda do Menu Pessoal” in Portuguese Language of Brazil. Unfortunately, in the past, I sent the text in the plural to the @anticapitalist, as I thought they would be several videos and is actually just a video teaching how to add or remove the “Menu Pessoal” submenus.

These remasters are far short of ISOs pseudo-antix-19 legacy bet3 with Kernel 4.4.0-264 that @Xecure built from “Build-iso”, which I do not have Minimum idea how to use “Build-iso”.

I would like to thank all the people who share their knowledge for the good of others here in the forum. I take this opportunity to make a special thanks to @ensabahnur, the creator of Respin Pin Linux OS, who guided me and taught me to make each stage of the remastering of these ISOs, without these teachings, these ISOs would not exist. Thank you very much, @ensabahnur. I also thank the @anticapitalist, developers, programmers, volunteer translators, testers and all people who contribute in some way with this fantastic GNU/Linux operating system that is antiX.

Note: Despite this topic being in the Portuguese language area, I will include automatic translation for English language.

marcelocripe
(Original text in Portuguese language of Brazil)

[Member marcelocripe]

Helpful

Up

0

::

Obs.: As datas dos arquivos estão na seguinte ordem mês – dia – ano.
Note: The dates of the archives are in the following month – day – year.

remaster_antiX-21_sysvinit_x64_full_kernel_4.4.0-296_01-15-2022.iso

remaster_antiX-21_sysvinit_x64_full_kernel_4.4.0-296_01-15-2022.iso.md5

remaster_antiX-21_sysvinit_x64_full_kernel_4.4.0-296_01-15-2022.iso.sha512

package_list

[Member marcelocripe]

Helpful

Up

0

::

Obs.: As datas dos arquivos estão na seguinte ordem mês – dia – ano.
Note: The dates of the archives are in the following month – day – year.

remaster_antiX-21_sysvinit_386_full_kernel_4.4.0-296_01-16-2022.iso

remaster_antiX-21_sysvinit_386_full_kernel_4.4.0-296_01-16-2022.iso.md5

remaster_antiX-21_sysvinit_386_full_kernel_4.4.0-296_01-16-2022.iso.sha512

package_list

[Member ydek]

Helpful

Up

0

::

Olá Marcelo.
Parabéns pela iniciativa da criação Remaster antiX 21 para computadores e notebooks com Chipsets SiS e Via.
No Brasil ainda temos muitas máquinas com essas configurações, e antiX 21 funciona muito bem com elas.

Legal em mencionar o Xecure, já que ele teve também uma iniciativa de criar Pseudo-antiX (antiX 19), que deu oportunidade de ser instalada em computadres e notebooks antigos.

Mas se pudesse ter uma Iso Remaster do antiX 21 para Chipsets SiS e Via seria o ideal, assim poderemos usar os benefícios dessa versão. Inclusive o antiX 21 está excelente e com muitas melhorias.

[Member seaken64]

Helpful

Up

0

::

@marcelocripe –

I had a little time this evening to do a couple of tests of the 32-bit iso of your remaster. Here’s what I have for you.

Test on Gateway MX3210 laptop.

This laptop is my only machine with a VIA graphics controller. It is an VIA CN700 series [S3 UniChrome Pro]. The driver chosen for Xorg at boot is “openchrome”. There is no driver listed for the general driver.

Video is set at 1280×768
Sound is VIA V8237. It works.
Wifi and Ethernet are built in. Built in wifi is Broadcom BCM4318. Did not try it. Used a Belkin USB wifi dongle instead. Belkin loads as Belkin FSD7050 Ralink RT2571W and uses the rt73usb driver. Wifi works.

Connman did not find my wifi. Switched to Ceni. It took a long time but it did find the wifi and connected.

This machine has 489M of RAM available so I did not try FirefoxESR. The CPU supports SSE2 so the current version of SeaMonkey will run. But I could not get it to install on the LiveUSB. I installed Netsurf instead and browsed to the antiX forum. It works fine.

Played a music stream with PMRP. Works fine. Streamtuner2 will probably also work fine but I did not take the time to set it up.

Switched to the JWM desktop. Then back to IceWM. Works fine.

Used Repo manager to select a repo. Used antiX updater to update and upgrade. Works good.

Shutdown and move tests to Pentium-III desktop.

Here’s the system info for the Gateway laptop

[code]System:
  Kernel: 4.4.0-296-antix.1-486-smp i686 bits: 32 compiler: gcc v: 10.2.1 
  Desktop: IceWM 2.9.4 Distro: antiX-21_386-full Grup Yorum 31 October 2021 
  base: Debian GNU/Linux 11 (bullseye) 
Machine:
  Type: Portable System: Gateway product: MX3210 v: 73.03 serial: <filter> 
  Mobo: Gateway model: N/A v: Rev1.73.03 serial: <filter> BIOS: Phoenix 
  v: 73.03 date: 01/06/2006 
Battery:
  ID-1: BAT0 charge: 8.9 Wh (42.2%) condition: 21.1/48.8 Wh (43.2%) 
  volts: 12.4 min: 11.1 model: Gateway W32044L status: Charging 
CPU:
  Info: Single Core model: Intel Celeron M bits: 32 type: MCP arch: M Dothan 
  rev: 8 cache: L2: 1024 KiB 
  flags: pae sse sse2 bogomips: 2793 
  Speed: 1397 MHz min/max: N/A Core speed (MHz): 1: 1397 
Graphics:
  Device-1: VIA CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] 
  vendor: Gateway driver: N/A bus-ID: 01:00.0 
  Display: x11 server: X.Org 1.20.11 driver: loaded: openchrome 
  unloaded: fbdev,modesetting,vesa resolution: 1280x768~60Hz 
  OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 
  direct render: Yes 
Audio:
  Device-1: VIA VT8233/A/8235/8237 AC97 Audio vendor: Gateway 
  driver: snd_via82xx v: kernel bus-ID: 00:11.5 
  Sound Server-1: ALSA v: k4.4.0-296-antix.1-486-smp running: yes 
Network:
  Device-1: Broadcom BCM4318 [AirForce One 54g] 802.11g Wireless LAN 
  driver: b43-pci-bridge v: N/A bus-ID: 00:0e.0 
  Device-2: VIA VT6102/VT6103 [Rhine-II] vendor: Gateway driver: via-rhine 
  v: N/A port: 1800 bus-ID: 00:12.0 
  IF: eth0 state: down mac: <filter> 
  Device-3: Belkin F5D7050 Wireless G Adapter v3000 [Ralink RT2571W] 
  type: USB driver: rt73usb bus-ID: 1-5:2 
  IF: wlan1 state: up mac: <filter> 
  IF-ID-1: wlan0 state: down mac: <filter> 
Drives:
  Local Storage: total: 44.87 GiB used: 1.06 GiB (2.4%) 
  ID-1: /dev/sda vendor: Hitachi model: HTS424040M9AT00 size: 37.26 GiB 
  ID-2: /dev/sdb type: USB vendor: PNY model: USB 2.0 FD size: 7.61 GiB 
Swap:
  ID-1: swap-1 type: partition size: 896 MiB used: 24 KiB (0.0%) 
  dev: /dev/sda5 
Sensors:
  System Temperatures: cpu: 54.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 136 Uptime: 8m Memory: 479 MiB used: 122.9 MiB (25.7%) 
  Init: SysVinit runlevel: 5 Compilers: gcc: 10.2.1 Packages: 1562 
  Shell: Bash v: 5.1.4 inxi: 3.3.06 [/code]

—–

Test on Compaq Deskpro EN desktop

This is my oldest machine that I use regularly. It has an old nvidia graphics cards installed.

Video = nvidia NV11 [GeForce2 MX200]. Driver: rivafb, Xorg Driver: nouveau
Audio = Intel 82801BA AC97. Driver:snd_intel8x0
Ethernet driver: e100

Repo Manager and antiX Updater worked good.

Played music stream with PMRP. Good.

Visited antiX forum with Links2. Good.

Switched to JWM. Good.

Shutdown

Here’s the inxi on the Compaq desktop:

[code]System:
  Kernel: 4.4.0-296-antix.1-486-smp i686 bits: 32 compiler: gcc v: 10.2.1 
  Desktop: IceWM 2.9.4 Distro: antiX-21_386-full Grup Yorum 31 October 2021 
  base: Debian GNU/Linux 11 (bullseye) 
Machine:
  Type: Desktop System: Compaq product: Deskpro v: N/A serial: <filter> 
  Mobo: Compaq model: 0684h serial: <filter> BIOS: Compaq v: 686P2 v2.04 
  date: 08/25/2000 
CPU:
  Info: Single Core model: Pentium III (Coppermine) bits: 32 type: MCP 
  arch: P6 III Coppermine rev: 6 cache: L2: 256 KiB 
  flags: pae sse bogomips: 1993 
  Speed: 997 MHz min/max: N/A Core speed (MHz): 1: 997 
Graphics:
  Device-1: NVIDIA NV11 [GeForce2 MX200] vendor: ASUSTeK driver: rivafb 
  v: kernel bus-ID: 01:00.0 
  Device-2: Brooktree Bt878 Video Capture 
  vendor: Hauppauge works WinTV Series driver: bttv v: 0.9.19 
  bus-ID: 02:09.0 
  Display: x11 server: X.Org 1.20.11 driver: loaded: fbdev,nouveau 
  unloaded: modesetting,vesa resolution: 1600x1200~75Hz 
  OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 
  direct render: Yes 
Audio:
  Device-1: Intel 82801BA/BAM AC97 Audio vendor: Compaq Deskpro EN 
  driver: snd_intel8x0 v: kernel bus-ID: 00:1f.5 
  Device-2: Brooktree Bt878 Video Capture 
  vendor: Hauppauge works WinTV Series driver: bttv v: 0.9.19 
  bus-ID: 02:09.0 
  Device-3: Brooktree Bt878 Audio Capture 
  vendor: Hauppauge works WinTV Series driver: snd_bt87x v: kernel 
  bus-ID: 02:09.1 
  Sound Server-1: ALSA v: k4.4.0-296-antix.1-486-smp running: yes 
Network:
  Device-1: Intel 82801BA/BAM/CA/CAM Ethernet 
  vendor: Compaq EtherExpress PRO/100 VM driver: e100 v: 3.5.24-k2-NAPI 
  port: 1000 bus-ID: 02:08.0 
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> 
Drives:
  Local Storage: total: 100.77 GiB used: 1.06 GiB (1.1%) 
  ID-1: /dev/sda vendor: Maxtor model: 6L100P0 size: 93.16 GiB 
  ID-2: /dev/sdd type: USB vendor: PNY model: USB 2.0 FD size: 7.61 GiB 
Swap:
  ID-1: swap-1 type: partition size: 1 GiB used: 0 KiB (0.0%) dev: /dev/sda5 
Sensors:
  Message: No sensor data found. Is lm-sensors configured? 
Info:
  Processes: 143 Uptime: 4m Memory: 496.3 MiB used: 130.5 MiB (26.3%) 
  Init: SysVinit runlevel: 5 Compilers: gcc: 10.2.1 Packages: 1562 
  Shell: Bash v: 5.1.4 inxi: 3.3.06 [/code]

—–

Hope this helps,

Seaken64

• This reply was modified 1 year, 2 months ago by seaken64.
• This reply was modified 1 year, 2 months ago by seaken64.

[Member marcelocripe]

Helpful

Up

0

::

Olá @seaken64.
Eu agradeço por nos ajudar a testar estas resmaterizações do antiX 21.
Eu consegui fazer alguns testes com ambas as ISOs de 32 bits e de 64 bits.

marcelocripe

– – – – –

Hello @seaken64.
Thanks for helping us test these antiX 21 remasters.
I was able to do some testing with both 32-bit and 64-bit ISOs.

marcelocripe

Teste com a ISO “remaster_antiX-21_sysvinit_x64_full_kernel_4.4.0-296_01-15-2022.iso” na placa-mãe Asus P5V800-MX:
Test with ISO “remaster_antiX-21_sysvinit_x64_full_kernel_4.4.0-296_01-15-2022.iso” on Asus P5V800-MX motherboard:

cp3@antix3:~
$ inxi -Fxz
System:
Kernel: 4.4.0-296-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc
v: 10.2.1 Desktop: IceWM 2.9.4
Distro: antiX-21_x64-full Grup Yorum 31 October 2021
base: Debian GNU/Linux 11 (bullseye)
Machine:
Type: Desktop Mobo: ASUSTeK model: P5V800-MX v: Rev 1.xx serial: <filter>
BIOS: American Megatrends v: 0802 date: 07/12/2006
CPU:
Info: Single Core model: Intel Celeron bits: 64 type: MCP
arch: Netburst Smithfield rev: 9 cache: L2: 256 KiB
flags: lm nx pae sse sse2 sse3 bogomips: 5054
Speed: 2527 MHz min/max: N/A Core speed (MHz): 1: 2527
Graphics:
Device-1: VIA CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro]
vendor: ASUSTeK driver: N/A bus-ID: 01:00.0
Display: x11 server: X.Org 1.20.11 driver: loaded: openchrome
unloaded: fbdev,modesetting,vesa resolution: 1360×768~60Hz
OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5
direct render: Yes
Audio:
Device-1: VIA VT8237A/VT8251 HDA vendor: ASUSTeK VX900/VT8xxx
driver: snd_hda_intel v: kernel bus-ID: 02:01.0
Sound Server-1: ALSA v: k4.4.0-296-antix.1-amd64-smp running: yes
Network:
Device-1: VIA VT6102/VT6103 [Rhine-II] vendor: ASUSTeK A7V600-X
driver: via-rhine v: N/A port: d400 bus-ID: 00:12.0
IF: eth0 state: down mac: <filter>
Drives:
Local Storage: total: 76.39 GiB used: 4.67 GiB (6.1%)
ID-1: /dev/sda vendor: Maxtor model: STM380815AS size: 74.53 GiB
ID-2: /dev/sdb type: USB model: FLASH Drive SM size: 1.86 GiB
Partition:
ID-1: / size: 13.68 GiB used: 3.62 GiB (26.5%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 59.28 GiB used: 1.6 MiB (0.0%) fs: ext4 dev: /dev/sda2
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 41.0 C mobo: 32.0 C
Fan Speeds (RPM): cpu: 0 case-1: 2250
Power: 12v: 11.84 5v: N/A 3.3v: 3.23 vbat: N/A
Info:
Processes: 150 Uptime: 5m Memory: 930.9 MiB used: 161.5 MiB (17.3%)
Init: SysVinit runlevel: 5 Compilers: gcc: 10.2.1 Packages: 1566
Shell: Bash v: 5.1.4 inxi: 3.3.06
cp3@antix3:~
$

cp3@antix3:~
$ inxi -S
System:
Host: antix3 Kernel: 4.4.0-296-antix.1-amd64-smp x86_64 bits: 64
Desktop: IceWM 2.9.4 Distro: antiX-21_x64-full Grup Yorum 31 October 2021
cp3@antix3:~
$

cp3@antix3:~
$ inxi -G
Graphics:
Device-1: VIA CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro]
driver: N/A
Display: x11 server: X.Org 1.20.11 driver: loaded: openchrome
unloaded: fbdev,modesetting,vesa resolution: 1360×768~60Hz
OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5
cp3@antix3:~
$

cp3@antix3:~
$ df -h
Sist. Arq. Tam. Usado Disp. Uso% Montado em
udev 451M 0 451M 0% /dev
tmpfs 94M 592K 93M 1% /run
/dev/sda1 14G 3,7G 9,4G 28% /
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 187M 0 187M 0% /dev/shm
/dev/sda2 60G 1,7M 57G 1% /home
tmpfs 4,0M 0 4,0M 0% /sys/fs/cgroup
tmpfs 94M 4,0K 94M 1% /run/user/1000
cp3@antix3:~
$

Teste com a ISO “remaster_antiX-21_sysvinit_386_full_kernel_4.4.0-296_01-16-2022.iso” na placa-mãe Asus P5V800-MX:
Test with ISO “remaster_antiX-21_sysvinit_386_full_kernel_4.4.0-296_01-16-2022.iso” on Asus P5V800-MX motherboard:

demo@antix1:~
$ inxi -Fxz
System: Kernel: 4.4.0-296-antix.1-486-smp i686 bits: 32 compiler: gcc v: 10.2.1 Desktop: IceWM 2.9.4
Distro: antiX-21_386-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: P5V800-MX v: Rev 1.xx serial: <filter> BIOS: American Megatrends v: 0802
date: 07/12/2006
CPU: Info: Single Core model: Intel Celeron bits: 64 type: MCP arch: Netburst Smithfield rev: 9 cache: L2: 256 KiB
flags: lm pae sse sse2 sse3 bogomips: 5054
Speed: 2527 MHz min/max: N/A Core speed (MHz): 1: 2527
Graphics: Device-1: VIA CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] vendor: ASUSTeK driver: N/A
bus-ID: 01:00.0
Display: x11 server: X.Org 1.20.11 driver: loaded: openchrome unloaded: fbdev,modesetting,vesa
resolution: 1360×768~60Hz
OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 direct render: Yes
Audio: Device-1: VIA VT8237A/VT8251 HDA vendor: ASUSTeK VX900/VT8xxx driver: snd_hda_intel v: kernel bus-ID: 02:01.0
Sound Server-1: ALSA v: k4.4.0-296-antix.1-486-smp running: yes
Network: Device-1: VIA VT6102/VT6103 [Rhine-II] vendor: ASUSTeK A7V600-X driver: via-rhine v: N/A port: d400 bus-ID: 00:12.0
IF: eth0 state: down mac: <filter>
Drives: Local Storage: total: 76.39 GiB used: 1.06 GiB (1.4%)
ID-1: /dev/sda vendor: Maxtor model: STM380815AS size: 74.53 GiB
ID-2: /dev/sdb type: USB model: FLASH Drive SM size: 1.86 GiB
Swap: Alert: No swap data was found.
Sensors: System Temperatures: cpu: 43.0 C mobo: 36.0 C
Fan Speeds (RPM): cpu: 0 case-1: 2235
Power: 12v: 11.84 5v: N/A 3.3v: 3.23 vbat: N/A
Info: Processes: 140 Uptime: 11m Memory: 939.4 MiB used: 139.2 MiB (14.8%) Init: SysVinit runlevel: 5 Compilers:
gcc: 10.2.1 Packages: 1562 Shell: Bash v: 5.1.4 inxi: 3.3.06
demo@antix1:~
$

demo@antix1:~
$ inxi -G
Graphics: Device-1: VIA CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] driver: N/A
Display: x11 server: X.Org 1.20.11 driver: loaded: openchrome unloaded: fbdev,modesetting,vesa
resolution: 1360×768~60Hz
OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5
demo@antix1:~
$

demo@antix1:~
$ inxi -S
System: Host: antix1 Kernel: 4.4.0-296-antix.1-486-smp i686 bits: 32 Desktop: IceWM 2.9.4
Distro: antiX-21_386-full Grup Yorum 31 October 2021
demo@antix1:~

Teste com a ISO “remaster_antiX-21_sysvinit_x64_full_kernel_4.4.0-296_01-15-2022.iso” na placa-mãe Gigabyte GA-8S661FXM-775:
Test with ISO “remaster_antiX-21_sysvinit_x64_full_kernel_4.4.0-296_01-15-2022.iso” on Gigabyte GA-8S661FXM-775 motherboard:

demo@antix1:~
$ inxi -Fnz
System: Kernel: 4.4.0-296-antix.1-amd64-smp x86_64 bits: 64 Desktop: IceWM 2.9.4
Distro: antiX-21_x64-full Grup Yorum 31 October 2021
Machine: Type: Desktop System: Hewlett-Packard product: HP dx2090 MT (AA123AV) v: N/A serial: <filter>
Mobo: Hewlett-Packard model: 0A30 serial: <filter> BIOS: Award v: F12 date: 04/25/2006
CPU: Info: Single Core model: Intel Celeron bits: 64 type: MCP cache: L2: 256 KiB
Speed: 3201 MHz min/max: N/A Core speed (MHz): 1: 3201
Graphics: Device-1: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display
Adapter
driver: N/A
Display: x11 server: X.Org 1.20.11 driver: loaded: vesa unloaded: fbdev,modesetting
resolution: 1024×768
OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5
Audio: Device-1: Silicon Integrated Systems [SiS] SiS7012 AC97 Sound driver: snd_intel8x0
Sound Server-1: ALSA v: k4.4.0-296-antix.1-amd64-smp running: yes
Network: Device-1: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet driver: sis900
IF: eth0 state: down mac: <filter>
Drives: Local Storage: total: 1.86 GiB used: 1.04 GiB (56.1%)
ID-1: /dev/sda type: USB model: FLASH Drive SM size: 1.86 GiB
Swap: Alert: No swap data was found.
Sensors: Message: No sensor data found. Is lm-sensors configured?
Info: Processes: 145 Uptime: 7m Memory: 1.92 GiB used: 175.6 MiB (8.9%) Shell: Bash inxi: 3.3.06
demo@antix1:~
$

demo@antix1:~
$ inxi -G
Graphics: Device-1: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display
Adapter
driver: N/A
Display: x11 server: X.Org 1.20.11 driver: loaded: vesa unloaded: fbdev,modesetting
resolution: 1024×768
OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5
demo@antix1:~
$

demo@antix1:~
$ inxi -S
System: Host: antix1 Kernel: 4.4.0-296-antix.1-amd64-smp x86_64 bits: 64 Desktop: IceWM 2.9.4
Distro: antiX-21_x64-full Grup Yorum 31 October 2021
demo@antix1:~
$

Teste com a ISO “remaster_antiX-21_sysvinit_386_full_kernel_4.4.0-296_01-16-2022.iso” na placa-mãe ECS 865PE-A rev 1.2 15-H70-01120 e a placa de vídeo GeForce4 MX 440 AGP 8x:
Test with ISO “remaster_antiX-21_sysvinit_386_full_kernel_4.4.0-296_01-16-2022.iso” on ECS 865PE-A rev 1.2 15-H70-01120 motherboard and GeForce4 MX 440 AGP 8x video card:

demo@antix1:~
$ inxi -Fnz
System:
Kernel: 4.4.0-296-antix.1-486-smp i686 bits: 32 Desktop: IceWM 2.9.4
Distro: antiX-21_386-full Grup Yorum 31 October 2021
Machine:
Type: Desktop Mobo: N/A model: SpringdalePE serial: <filter> BIOS: Phoenix
v: 6.00 PG date: 10/20/2003
CPU:
Info: Single Core model: Intel Pentium 4 bits: 32 type: MT cache:
L2: 512 KiB
Speed: 2394 MHz min/max: N/A Core speeds (MHz): 1: 2394 2: 2394
Graphics:
Device-1: NVIDIA NV18 [GeForce4 MX 440 AGP 8x] driver: nvidiafb v: kernel
Display: x11 server: X.Org 1.20.11 driver: loaded: fbdev,nouveau
unloaded: modesetting,vesa resolution: 800×600~75Hz
OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5
Audio:
Device-1: Intel 82801EB/ER AC97 Audio driver: snd_intel8x0
Sound Server-1: ALSA v: k4.4.0-296-antix.1-486-smp running: yes
Network:
Device-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
driver: 8139too
IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.86 GiB used: 1.06 GiB (57.1%)
ID-1: /dev/sda type: USB model: FLASH Drive SM size: 1.86 GiB
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 47.5 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 145 Uptime: 3m Memory: 1002.9 MiB used: 129.4 MiB (12.9%)
Shell: Bash inxi: 3.3.06
demo@antix1:~
$

demo@antix1:~
$ inxi -S
System:
Host: antix1 Kernel: 4.4.0-296-antix.1-486-smp i686 bits: 32
Desktop: IceWM 2.9.4 Distro: antiX-21_386-full Grup Yorum 31 October 2021
demo@antix1:~
$

demo@antix1:~
$ inxi -G
Graphics:
Device-1: NVIDIA NV18 [GeForce4 MX 440 AGP 8x] driver: nvidiafb v: kernel
Display: x11 server: X.Org 1.20.11 driver: loaded: fbdev,nouveau
unloaded: modesetting,vesa resolution: 800×600~75Hz
OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5
demo@antix1:~
$

[Anonymous]

Helpful

Up

0

::

I downloaded the iso and will check, but my sis-760lv worked on newer kernels also.
I can check 32-bit intel video also (845-945)

[Anonymous]

Helpful

Up

0

::

may have to do a thread on which bios/chip id works.

[Member ydek]

Helpful

Up

0

::

Oi LinuxDaddy.
Seu computador tem Chipset SiS 661/741/760?
Qual resolução para obter com este remaster?
Eu tenho esse Chipset, eu gravei o Remaster no pendrive para testar, mas a resolução fica com 640×480.

———-

Hi Linuxdaddy.

Does your computer have Chipset SiS 661/741/760?
Which resolution to get with this remaster?

I have this Chipset.
I recorded the remaster in the pendrive to test, but the resolution is 640×480.

• This reply was modified 1 year, 2 months ago by ydek.
• This reply was modified 1 year, 2 months ago by ydek.
• This reply was modified 1 year, 2 months ago by ydek.

[Member marcelocripe]

Helpful

Up

0

::

A placa-mãe ECS P4M800PRO-M V 1.0 não conseguiu inicializar no modo gráfico com a inicialização normal da ISO “remaster_antiX-21_sysvinit_x64_full_kernel_4.4.0-296_01-15-2022.iso”, só conseguiu inicializar no modo gráfico com a inicialização no modo de vídeo seguro. A mesma situação ocorreu com a ISO “remaster_antiX-21_sysvinit_386_full_kernel_4.4.0-296_01-16-2022.iso”.

A seguir, estão as informações após a instalação da ISO “remaster_antiX-21_sysvinit_x64_full_kernel_4.4.0-296_01-15-2022.iso” no disco rígido:

– – – – –

ECS P4M800PRO-M V 1.0 motherboard failed to boot in graphical mode with normal boot from ISO “remaster_antiX-21_sysvinit_x64_full_kernel_4.4.0-296_01-15-2022.iso”, only able to boot in graphical mode with boot in safe video. The same situation occurred with the ISO “remaster_antiX-21_sysvinit_386_full_kernel_4.4.0-296_01-16-2022.iso”.

Following is the information after installing the ISO “remaster_antiX-21_sysvinit_x64_full_kernel_4.4.0-296_01-15-2022.iso” on the hard drive:

cp6@antix6:~
$ inxi -Fxz
System:
Kernel: 4.4.0-296-antix.1-amd64-smp x86_64 bits: 64 compiler: gcc
v: 10.2.1 Desktop: IceWM 2.9.4
Distro: antiX-21_x64-full Grup Yorum 31 October 2021
base: Debian GNU/Linux 11 (bullseye)
Machine:
Type: Desktop Mobo: ECS model: P4M800PRO-M v: 1.0 serial: <filter>
BIOS: American Megatrends v: 080012 date: 12/10/2005
CPU:
Info: Single Core model: Intel Pentium 4 bits: 64 type: MT
arch: Netburst Smithfield rev: 9 cache: L2: 1024 KiB
flags: lm nx pae sse sse2 sse3 bogomips: 12242
Speed: 3061 MHz min/max: N/A Core speeds (MHz): 1: 3061 2: 3061
Graphics:
Device-1: VIA CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro]
vendor: Elite Systems driver: N/A bus-ID: 01:00.0
Display: x11 server: X.Org 1.20.11 driver: loaded: vesa
resolution: 1024×768
OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5
direct render: Yes
Audio:
Device-1: VIA VT8233/A/8235/8237 AC97 Audio
vendor: Elite Systems K8M800-M2 driver: snd_via82xx v: kernel
bus-ID: 00:11.5
Sound Server-1: ALSA v: k4.4.0-296-antix.1-amd64-smp running: yes
Network:
Device-1: VIA VT6102/VT6103 [Rhine-II] driver: via-rhine v: N/A port: ee00
bus-ID: 00:12.0
IF: eth0 state: down mac: <filter>
Drives:
Local Storage: total: 74.53 GiB used: 3.56 GiB (4.8%)
ID-1: /dev/sda vendor: Maxtor model: STM380815AS size: 74.53 GiB
Partition:
ID-1: / size: 19.52 GiB used: 3.56 GiB (18.2%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 53.37 GiB used: 1.6 MiB (0.0%) fs: ext4 dev: /dev/sda2
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 30.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 162 Uptime: 7m Memory: 962.7 MiB used: 187.4 MiB (19.5%)
Init: SysVinit runlevel: 5 Compilers: gcc: 10.2.1 Packages: 1566
Shell: Bash v: 5.1.4 inxi: 3.3.06
cp6@antix6:~
$

cp6@antix6:~
$ inxi -G
Graphics:
Device-1: VIA CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro]
driver: N/A
Display: x11 server: X.Org 1.20.11 driver: loaded: vesa
resolution: 1024×768
OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5
cp6@antix6:~
$

cp6@antix6:~
$ df -h
Sist. Arq. Tam. Usado Disp. Uso% Montado em
udev 467M 0 467M 0% /dev
tmpfs 97M 568K 96M 1% /run
/dev/sda1 20G 3,6G 15G 20% /
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 193M 0 193M 0% /dev/shm
/dev/sda2 54G 1,7M 51G 1% /home
tmpfs 4,0M 0 4,0M 0% /sys/fs/cgroup
tmpfs 97M 4,0K 97M 1% /run/user/1000
cp6@antix6:~
$

[Anonymous]

Helpful

Up

0

::

Mine only does the vesa driver and won’t load the sis driver on any iso.

[Anonymous]

Helpful

Up

0

::

I do have an old amd athlon machine with s3 video to try out.
it’s a s3 savage video with a 2ghz amd athlon – 32 bit.

[Member marcelocripe]

Helpful

Up

0

::

Mine only does the vesa driver and won’t load the sis driver on any iso.

Olá linuxdaddy.
Você tentou inicializar o antiX nesta placa-mãe com os outros dois modos: “Modo de Vídeo Seguro” e com o “Modo a Prova de Falhas”?

Com a placa de vídeo GeForce4 MX 440 AGP 8x, nenhum dos modos “Modo de Vídeo Seguro” e o “Modo a Prova de Falhas” conseguiu inicializar, em ambos os modos a tela apagava.

Já na placa de vídeo P4M800 Pro, conseguiu inicializar somente com o “Modo de Vídeo Seguro”.

– – – – –

Mine only does the vesa driver and won’t load the sis driver on any iso.

Hello linuxdaddy.
Have you tried to boot antiX on this motherboard with the other two modes: “Safe Video Mode” and “Failsafe Mode”?

With GeForce4 MX 440 AGP 8x video card, none of “Safe Video Mode” and “Failsafe Mode” could boot, in both modes the screen was blank.

Already on the P4M800 Pro video card, it was able to boot only with “Safe Video Mode”.

[Anonymous]

Helpful

Up

0

::

at the moment my sis has issues and can’t test. the mobo pins popped off the motherboard on
the cooler and have to be resoldered …. I have an old amd – S3 board that can check.. is
a amd cpu with an s3-via 32 bit only.

[Member ydek]

Helpful

Up

0

::

Anonymous wrote:

Mine only does the vesa driver and won’t load the sis driver on any iso.

Ok I understand, the same thing happens with Chipset SiS 661/741/760.

[Author]

Posts