Slimjet-no sound on videos

Forum Forums General Software Slimjet-no sound on videos

  • This topic has 8 replies, 3 voices, and was last updated Sep 14-7:10 am by greyowl.
Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #41584
    Member
    greyowl

      I am trying Slimjet on a Dell Latitude D600 with antiX 17.
      When I try to play videos on a news site, the video plays but there is no sound.
      When I play the video with firefox, it has sound. Also, the sound test works fine.
      I am using Slimjet with a Dell D610 and it works fine.
      The problem seems to be with Slimjet.

      Is there someone that uses Slimjet, who may be able to help me with this problem.

      Dell Latitude D620 laptop with antiX 22 (64 bit)

      #41588
      Anonymous
        Helpful
        Up
        0
        ::

        is the “apulse” package installed. If not, install that and retry (may need to logout and reenter before trying).

        If the above doesn’t solve, the following web search results seem promising:
        https://forum.mxlinux.org/viewtopic.php?t=50555&start=10
        http://www.pclinuxos.com/forum/index.php?topic=130427.0
        https://www.slimjet.com/en/forum/viewtopic.php?t=2605
        https://www.slimjet.com/en/forum/viewtopic.php?t=2469&p=10384

        #41593
        Moderator
        caprea
          Helpful
          Up
          0
          ::

          Yes, you are right, there is no sound.

          But if I start from terminal with

          /usr/bin/flashpeak-slimjet --alsa-output-device=hw:1,0
          

          the sound works.You have to know which soundcard you use. card 1 or card 0

           cat /proc/asound/cards
          

          gives here

          $ cat /proc/asound/cards
           0 [HDMI           ]: HDA-Intel - HDA Intel HDMI
                                HDA Intel HDMI at 0xe0630000 irq 43
           1 [PCH            ]: HDA-Intel - HDA Intel PCH
                                HDA Intel PCH at 0xe0634000 irq 33
          

          I know I use the PCH card for my headphones , so for me it’s
          --alsa-output-device=hw:1,0

          If I would use the HDMI card it would be
          --alsa-output-device=hw:0,1

          It’s a workaround I found on the net.

          Like here
          https://www.slimjet.com/en/forum/viewtopic.php?f=5&t=2469&start=50#p9636

          `

          • This reply was modified 2 years, 7 months ago by caprea.
          #41607
          Member
          greyowl
            Helpful
            Up
            0
            ::

            @skidoo

            is the “apulse” package installed. If not, install that and retry (may need to logout and reenter before trying).

            Thanks for the information.
            I installed apulse and did a restart. Still no sound.
            Tried terminal with “apulse flashpeak-slimjet”, but that didn’t work either.
            Will study the references.

            Dell Latitude D620 laptop with antiX 22 (64 bit)

            #41612
            Member
            greyowl
              Helpful
              Up
              0
              ::

              @caprea

              Here are my sound card results:
              user@user:~
              $ user@user:~
              $ cat /proc/asound/cards
              0 [I82801DBICH4 ]: ICH4 – Intel 82801DB-ICH4
              Intel 82801DB-ICH4 with STAC9750,51 at irq 5
              1 [Modem ]: ICH-MODEM – Intel 82801DB-ICH4 Modem
              Intel 82801DB-ICH4 Modem at irq 5

              It appears that 0 is the sound card in use.

              I tried in terminal: /usr/bin/flashpeak-slimjet –alsa-output-device=hw:0,1
              Still did not work.

              Dell Latitude D620 laptop with antiX 22 (64 bit)

              #41614
              Moderator
              caprea
                Helpful
                Up
                0
                ::

                Do you have pulseaudio installed ?
                Then might try
                pasuspender -- /usr/bin/flashpeak-slimjet --alsa-output-device=hw:0,1

                #41625
                Member
                greyowl
                  Helpful
                  Up
                  0
                  ::

                  Yes, pulseaudio is installed.
                  I tried: pasuspender — /usr/bin/flashpeak-slimjet –alsa-output-device=hw:0,1

                  Still does not work.

                  Is it OK to have both pulseaudio and apulse installed?

                  Dell Latitude D620 laptop with antiX 22 (64 bit)

                  #41651
                  Moderator
                  caprea
                    Helpful
                    Up
                    0
                    ::

                    Is it OK to have both pulseaudio and apulse installed?

                    It should not matter. On antiX19 apulse is installed by default and someone could install additional pulseaudio.
                    I wonder why the workaround does not have any effect for you.It’s slimjet 27.0.7.0 here.

                    #41653
                    Member
                    greyowl
                      Helpful
                      Up
                      0
                      ::

                      yea, it beats me. I don’t understand why it doesn’t work if it works for you.
                      Thanks for the help.

                      Dell Latitude D620 laptop with antiX 22 (64 bit)

                    Viewing 9 posts - 1 through 9 (of 9 total)
                    • You must be logged in to reply to this topic.