testing 5.10 kernel

Forum Forums antiX-development Development testing 5.10 kernel

  • This topic has 84 replies, 13 voices, and was last updated Nov 22-11:30 am by ModdIt.
Viewing 10 posts - 76 through 85 (of 85 total)
  • Author
    Posts
  • #89929
    Member
    olsztyn

      Particularly (in my testing) kernel 5.10.142, which appears to have the smallest memory footprint and best memory management. Calciumsodium did not see any memory footprint gains running sysvinit but with my systems as runit I definitely see better memory footprint vs. 5.10.104 by about 10Mb. I am very particular about memory footprint and it is noticeable. Perhaps some optimizations have taken place…

      To supplement my previous observation, comparing antiX kernel 5.10.142 (configured by anticapitalista), which was vs. other versions of kernel 5.10.xxx:
      Unexpected to me another observation is that kernel 5.10.142 appears to be attributed for equal (or even slightly lower by 1-3 Mb) initial memory footprint of antiX 21 runit (*elogind*-free) than stock kernel 4.9, as provided in antiX 21. This is quite a surprise to me…
      If anticapitalista (or Debian) has done some significant optimization, then it is a significant accomplishment. If someone knows what has been done I would appreciate some info…
      My testing has been done on Thinkpad T410 laptops from 2010: i5, 4Gb, Nouveau driver on nVidia NVS3100. I will check on some other laptops as well…

      • This reply was modified 1 year, 6 months ago by olsztyn.

      Live antiX Boot Options (Previously posted by Xecure):
      http://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_Parameters

      #89931
      Moderator
      Brian Masinick

        @olsztyn: I’m really happy to hear that antiX kernel 5.10.142 has worked so well for you. I did have some success with it too on my Dell Inspiron 5558 laptop, though I was also battling with unexplained boot issues with both the 137 and 142 instances on that system, whereas the 4.9, 4.19 and Liquorix kernels all worked with out any “tweaks” necessary.

        The thing we can take away from all of this is thankfulness that we have so many choices that allow us to run these systems.

        The irony of it all is that to get the laptop I’m using now working, I had to manually copy multiple things from elsewhere: 1) the kernel image, 2) the kernel headers, 3) the modules, and 4) the kernel firmware, plus I had to pull in an extra wireless firmware file from another system, but thanks to multi-booting, I was able to copy and hack all of these things and I’m running here today on a system that requires a 5.16 or newer kernel – my HP 14-fq1025nr laptop. I’m about to update my status information on that very system in my information thread, which I keep for historical and test data information, plus FYI for anyone with similar hardware.

        --
        Brian Masinick

        #91612
        Member
        Robin

          I had promised to test your 5.10.142 kernel on this 32 bit notebook. So here I’m with the results. The kernel boots very fast, but it wouldn’t start X, asking for console login instead. Here are the logs and dmesg output (attached) I’ve saved immediately after startup. Maybe you can make something of it.

          (inxi -zv8)

          System:    Kernel: 5.10.142-antix.2-686-smp-pae i686 bits: 32 compiler: gcc v: 10.2.1 
                     parameters: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all 
                     Desktop: IceWM 2.9.4 vt: 7 dm: N/A Distro: antiX-21_386-full Grup Yorum 31 October 2021 
                     base: Debian GNU/Linux 11 (bullseye) 
          Machine:   Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: <filter> 
                     Chassis: No Enclosure type: 1 serial: <filter> 
                     Mobo: Notebook model: RIM2000 serial: <filter> BIOS: Phoenix v: RIM00F0A 
                     date: 05/27/2005 
          Battery:   ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) volts: 16.6 
                     min: 14.8 model: ARIMA LI4403A type: Unknown serial: <filter> status: Full 
          Memory:    RAM: total: 1.96 GiB used: 858.2 MiB (42.7%) 
                     RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
          PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. 
          CPU:       Info: Single Core model: Intel Pentium M bits: 32 type: MCP arch: M Dothan family: 6 
                     model-id: D (13) stepping: 8 microcode: 20 cache: L2: 2 MiB bogomips: 3457 
                     Speed: 800 MHz min/max: 800/1733 MHz Core speed (MHz): 1: 800 
                     Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx 
                     pae pbe pge pse pti sep ss sse sse2 tm tm2 tsc vme 
                     Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported 
                     Type: l1tf mitigation: PTE Inversion 
                     Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
                     Type: meltdown mitigation: PTI 
                     Type: mmio_stale_data status: Unknown: No mitigations 
                     Type: retbleed status: Not affected 
                     Type: spec_store_bypass status: Vulnerable 
                     Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
                     Type: spectre_v2 
                     mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected 
                     Type: srbds status: Not affected 
                     Type: tsx_async_abort status: Not affected 
          Graphics:  Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: N/A 
                     alternate: nvidiafb, nouveau bus-ID: 01:00.0 chip-ID: 10de:0148 class-ID: 0300 
                     Display: x11 server: X.Org 1.20.11 driver: loaded: nouveau,vesa 
                     unloaded: fbdev,modesetting alternate: nv display-ID: :0.0 screens: 1 
                     Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 271x203mm (10.7x8.0") 
                     s-diag: 339mm (13.3") 
                     Monitor-1: default res: 1024x768 
                     OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1 
                     direct render: Yes 
          Audio:     Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks 
                     driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403 
                     Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation 
                     driver: saa7134 v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480 
                     Sound Server-1: ALSA v: k5.10.142-antix.2-686-smp-pae running: yes 
          Network:   Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 
                     port: 2000 bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200 
                     IF: eth0 state: down mac: <filter> 
                     Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq 
                     modules: wl port: 2000 bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280 
                     IF: eth1 state: up mac: <filter> 
                     IP v4: <filter> scope: global broadcast: <filter> 
                     IP v6: <filter> scope: link 
                     WAN IP: <filter> 
          Bluetooth: Message: No bluetooth data found. 
          Logical:   Message: No logical block device data found. 
          RAID:      Message: No RAID data found. 
          Drives:    Local Storage: total: 151.75 GiB used: 85.38 GiB (56.3%) 
                     SMART Message: Unable to run smartctl. Root privileges required. 
                     ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A size: 93.16 GiB 
                     block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> 
                     rev: 3.02 scheme: MBR 
                     ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk 
                     size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> 
                     rev: 8.01 scheme: MBR 
                     SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
                     Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B 
                     dev-links: cdrom,cdrw,dvd,dvdrw 
                     Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r 
                     state: running 
          Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) 
                     used: 13.6 GiB (23.6%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb 
                     uuid: 862f493d-6951-444f-a3f6-734244b241e7 
                     ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 5.4 MiB (11.1%) 
                     fs: vfat dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 
                     ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) 
                     used: 34.65 GiB (83.2%) fs: ext3 dev: /dev/sda7 maj-min: 8:7 label: /daten3 
                     uuid: c1bc867a-ec28-436d-831b-e47f334471ce 
                     ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) 
                     fs: ext3 dev: /dev/sda8 maj-min: 8:8 label: /daten4 
                     uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da 
                     ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) 
                     fs: ext3 dev: /dev/sda5 maj-min: 8:5 label: /home 
                     uuid: 94021be3-c160-4166-a151-92ad72b26f9a 
                     ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 7.95 GiB (81.6%) 
                     fs: ext4 dev: /dev/sda6 maj-min: 8:6 label: antiX 
                     uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec 
                     ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 4.3 GiB (55.2%) 
                     fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal 
                     uuid: 19eaea0e-493b-4007-8eff-f14aca40363f 
                     ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) 
                     fs: ext4 dev: /dev/sda10 maj-min: 8:10 label: N/A 
                     uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d 
          Swap:      Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) 
                     ID-1: swap-1 type: partition size: 2.16 GiB used: 0 KiB (0.0%) priority: -2 
                     dev: /dev/sda9 maj-min: 8:9 label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 
          Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: <superuser required> label: N/A uuid: N/A 
          USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s 
                     chip-ID: 1d6b:0002 class-ID: 0900 
                     Device-1: 1-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage 
                     interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 
                     serial: <filter> 
                     Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s 
                     chip-ID: 1d6b:0001 class-ID: 0900 
                     Device-1: 2-1:2 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard 
                     driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA 
                     chip-ID: 093a:2533 class-ID: 0300 
                     Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s 
                     chip-ID: 1d6b:0001 class-ID: 0900 
                     Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s 
                     chip-ID: 1d6b:0001 class-ID: 0900 
          Sensors:   Message: No sensor data found. Is lm-sensors configured? 
          Repos:     Packages: apt: 1819 lib: 879 
                     Active apt repos in: /etc/apt/sources.list.d/antix.list 
                     1: deb http: //ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye main nosystemd nonfree
                     Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 
                     1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free
                     Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
                     1: deb http: //ftp.de.debian.org/debian/ bullseye-updates main contrib non-free
                     Active apt repos in: /etc/apt/sources.list.d/debian.list 
                     1: deb http: //ftp.de.debian.org/debian/ bullseye main contrib non-free
                     2: deb http: //security.debian.org/ bullseye-security main contrib non-free
                     No active apt repos in: /etc/apt/sources.list.d/various.list 
          Processes: CPU top: 5 of 130 
                     1: cpu: 31.4% command: firefox-esr pid: 6428 mem: 159.9 MiB (7.9%) 
                     2: cpu: 24.0% command: firefox-esr pid: 6235 mem: 363.9 MiB (18.1%) 
                     3: cpu: 13.0% command: yad pid: 7556 mem: 24.1 MiB (1.2%) 
                     4: cpu: 4.7% command: xorg pid: 3738 mem: 71.5 MiB (3.5%) 
                     5: cpu: 4.7% command: gtkdialog pid: 7523 mem: 23.8 MiB (1.1%) 
                     Memory top: 5 of 130 
                     1: mem: 363.9 MiB (18.1%) command: firefox-esr pid: 6235 cpu: 24.0% 
                     2: mem: 159.9 MiB (7.9%) command: firefox-esr pid: 6428 cpu: 31.4% 
                     3: mem: 115.4 MiB (5.7%) command: firefox-esr pid: 6374 cpu: 1.3% 
                     4: mem: 77.9 MiB (3.8%) command: firefox-esr pid: 6313 cpu: 0.1% 
                     5: mem: 71.5 MiB (3.5%) command: xorg pid: 3738 cpu: 4.7% 
          Info:      Processes: 130 Uptime: 18m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 
                     tool: service Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release 
                     inxi: 3.3.06 

          (initrd.log)

          Run custom code before reading boot codes: /live/custom/antiX/0.sh
          Translate to de
          Schrift aufLat15-VGA16 setzen
          setfont /live/locale/fonts/Lat15-VGA16.psf -C /dev/console
          Neue Bildschirmbreite 80
          @ 1.59 starting tsplash
          === initrd bootstrap ==================================================
          initrd init started at 0.23 seconds
          Willkommen bei antiX 21 (Grup Yorum) 32-bit pae!
            BusyBox v1.31.1 (2021-02-03 15:54:12 MST) multi-call binary.
            ntfs-3g 2017.3.23AR.3 integrated FUSE 28
                     initrd version: 8.30.14-x08
                       initrd built: Fri, 04 Jun 2021 11:43:21 +0000
                       Total Memory:  2009 M
                        Used Memory:    37 M
                       Linux kernel: 5.10.142-antix.2-686-smp-pae
                       Screen width: 80
                        Kernel arch: i686
                           Hardware: Notebook RIM2000
          Augenblickliche Bootparameter:
               lang=de_DE tz=Europe/Berlin quiet splasht disable=lxF mount=all xorg=nouveau
          overlay gefunden
          Lade Hardware spezifische Module ...
          Prüfe usb,cd Geräte. Suche nach boot Datei(en) antiX/linuxfs
          Herausgefilterte Geräte  /dev/sr0
          Versuch wiederholen für 15 Sekunden .
          Neue(s) Gerät(e) /dev/sdb2 /dev/sdb1 /dev/sdb /dev/sr0 gefunden
          mount -t vfat -o umask=000,dmask=002,fmask=113,shortname=winnt,uid=1000,gid=1000 /dev/sdb2 /live/boot-dev
          mount -t ext4 -o ro,noatime /dev/sdb1 /live/boot-dev
          Eingehängtes boot Gerät. Gerät /dev/sdb1 eingehängt auf /live/boot-dev
          boot Gerät Dateisystem: ext4
          boot device model: Flash Disk
          Spent 1.63 seconds looking for boot file(s) antiX/linuxfs
          loop times: 0.25
          boot device uuid: 862f493d-6951-444f-a3f6-734244b241e7
          BOOT_MP:    /live/boot-dev
          SQFILE_DEV: /dev/sdb1
          SQFILE_MP   /live/boot-dev
          Starte Generator für Zufallsnummern...
          Speichere zufälligen seed
          Mount file /live/boot-dev/antiX/linuxfs at /live/linux
          mount -t squashfs -o loop,ro /live/boot-dev/antiX/linuxfs /live/linux
          sqfs_vid: ==== a246bdfb23d4f341469b4de1b42f134d
          LD_PATH: /live/linux/lib:/live/linux/lib/i386-linux-gnu:/live/linux/usr/lib
          Loaded 13 module(s)
          nls_utf8 nls_cp437 uas usb_storage hid_generic uhci_hcd firewire_ohci firewire_core dm_crypt dm_mod overlay battery fotg210_hcd
          precheck filesystem on /dev/sdb1
          Erstellen aufs ram tmpfs bei /live/aufs-ram       (1577 MB)
          /bin/mount -t tmpfs -o size=1577m,noatime tmpfs /live/aufs-ram
          Mount overlayfs at /live/aufs
          mount -t overlay overlay -o lowerdir=/live/linux,upperdir=/live/aufs-ram/upper,workdir=/live/aufs-ram/work /live/aufs
          Load microcode
          Found one video display device
          Erstellen   /media tmpfs bei /live/aufs/media     (10 MB)
          /bin/mount -t tmpfs -o size=10m,noatime tmpfs /live/aufs/media
          Erstellen     /run tmpfs bei /live/aufs/run       (1111 MB)
          /bin/mount -t tmpfs -o size=1111m,mode=755,nodev,noatime tmpfs /live/aufs/run
          Erstellen    /live tmpfs bei /live/aufs/live      (100 MB)
          /bin/mount -t tmpfs -o size=100m,mode=755,noatime tmpfs /live/aufs/live
          Run custom code before: /live/custom/antiX/0.sh
          mount --move /live/aufs-ram /live/aufs/live/aufs-ram
          mount --move /live/boot-dev /live/aufs/live/boot-dev
          mount --move /live/linux /live/aufs/live/linux
          Run custom code after: /live/custom/antiX/0.sh
          Run custom code before running live init.d scripts: /live/custom/antiX/8.sh
          Das initrd init Programm brauchte 16.41 Sekunden
          ======================================================================
          cp /live/config/tsplash/progress /live/aufs/live/config/tsplash/progress
          cp /live/config/tsplash/tsplash.log /live/aufs/live/config/tsplash/tsplash.log

          (live-init.log)

          Thu Oct 27 07:18:26 CEST 2022  /live/etc/init.d/live-usb-save
          live-usb-save: Restore state information
            Restore machine specific state file /etc/udev/rules.d/70-persistent-net.rules
            Restore machine specific state file /var/lib/connman/wifi_0012f006fa18_574b3233_managed_psk/settings
            Restore general state file /etc/fstab.mount
            Restore general state file /var/log/live/persist-save.log
          Thu Oct 27 07:18:26 CEST 2022  /live/etc/init.d/live-L10n
          live-L10n: Lokalisierung der Konsole und Zeitzone
            Einstellung der Zeitzone und der Ortszeit auf Europe/Berlin
            Einstellung des Gebietsschema auf de_DE.UTF-8
          Thu Oct 27 07:18:27 CEST 2022  /live/etc/init.d/live-init
          live-init: Lokalisierung/Konfiguration X-Window
            Microcode laden
            Alle Geräte werden gemountet
            make-fstab: Remove all dynamic entries from /etc/fstab
            make-fstab: Create new /etc/fstab
            make-fstab: Automount /dev/sda1 at /media/antiX-Frugal
            make-fstab: Automount /dev/sda5 at /media/_home
            make-fstab: Automount /dev/sda6 at /media/antiX
            make-fstab: Automount /dev/sda7 at /media/_daten3
            make-fstab: Automount /dev/sda8 at /media/_daten4
            make-fstab: Automount /dev/sda10 at /media/sda10
            make-fstab: Automount /dev/sdb2 at /media/ANTIX-UEFI
            make-fstab: Put 9 hard drive entries into /etc/fstab
            make-fstab: Put 1 removable entry into /etc/fstab
            Repository-Lokalisierung auf Europe/Berlin
            Menü-Lokalisierung auf /live/etc/init.d/live-init in /etc/skel
            Einstellung xkb-layout auf de,us
            Einstellung xkb-model auf pc105
            Einstellung xkb-variant auf 
            Einstellung xkb-options auf grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll
            CONSOLE KEYMAP: /etc/default/keyboard
            Nach Hardware-spezifischen Video-Module wird gescannt...
            KMS Video-Modul(e) gefunden nouveau
            Datei /etc/X11/xorg.conf wird mit nouveau konfiguriert
            Standardbenutzer demo gefunden
          Thu Oct 27 07:18:35 CEST 2022  /live/etc/init.d/live-disable-services
          live-disable-services: Customizing services
            Disabling some services (L, lean)
            Disabling more services (X, Xtralean)

          (Xorg.0.log))

          [    32.991] 
          X.Org X Server 1.20.11
          X Protocol Version 11, Revision 0
          [    32.991] Build Operating System: linux Debian
          [    32.991] Current Operating System: Linux antix1 5.10.142-antix.2-686-smp-pae #1 SMP Sat Sep 10 19:09:21 EEST 2022 i686
          [    32.991] Kernel command line: lang=de_DE tz=Europe/Berlin quiet splasht disable=lxF mount=all xorg=nouveau
          [    32.991] Build Date: 10 November 2021  11:00:13AM
          [    32.991] xorg-server 2:1.20.11-1.0nosystemd1 (http://www.debian.org/support) 
          [    32.991] Current version of pixman: 0.40.0
          [    32.991] 	Before reporting problems, check http://wiki.x.org
          	to make sure that you have the latest version.
          [    32.991] Markers: (--) probed, (**) from config file, (==) default setting,
          	(++) from command line, (!!) notice, (II) informational,
          	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
          [    32.994] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 07:18:55 2022
          [    33.004] (==) Using config file: "/etc/X11/xorg.conf"
          [    33.004] (==) Using config directory: "/etc/X11/xorg.conf.d"
          [    33.004] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
          [    33.019] (==) No Layout section.  Using the first Screen section.
          [    33.019] (==) No screen section available. Using defaults.
          [    33.019] (**) |-->Screen "Default Screen Section" (0)
          [    33.019] (**) |   |-->Monitor "<default monitor>"
          [    33.022] (==) No device specified for screen "Default Screen Section".
          	Using the first device section listed.
          [    33.022] (**) |   |-->Device "Device0"
          [    33.022] (==) No monitor specified for screen "Default Screen Section".
          	Using a default monitor configuration.
          [    33.022] (==) Automatically adding devices
          [    33.022] (==) Automatically enabling devices
          [    33.022] (==) Automatically adding GPU devices
          [    33.022] (==) Max clients allowed: 256, resource mask: 0x1fffff
          [    33.042] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
          [    33.042] 	Entry deleted from font path.
          [    33.044] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
          [    33.044] 	Entry deleted from font path.
          [    33.044] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
          [    33.044] 	Entry deleted from font path.
          [    33.044] (==) FontPath set to:
          	/usr/share/fonts/X11/misc,
          	/usr/share/fonts/X11/100dpi/:unscaled,
          	/usr/share/fonts/X11/Type1,
          	/usr/share/fonts/X11/100dpi,
          	built-ins
          [    33.044] (==) ModulePath set to "/usr/lib/xorg/modules"
          [    33.044] (II) The server relies on udev to provide the list of input devices.
          	If no devices become available, reconfigure udev or disable AutoAddDevices.
          [    33.044] (II) Loader magic: 0x70a700
          [    33.044] (II) Module ABI versions:
          [    33.044] 	X.Org ANSI C Emulation: 0.4
          [    33.044] 	X.Org Video Driver: 24.1
          [    33.044] 	X.Org XInput driver : 24.1
          [    33.044] 	X.Org Server Extension : 10.0
          [    33.098] (--) PCI:*(1@0:0:0) 10de:0148:161f:203d rev 162, Mem @ 0xa0000000/67108864, 0xc0000000/134217728, 0x90000000/16777216, BIOS @ 0x????????/131072
          [    33.098] (II) LoadModule: "glx"
          [    33.131] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
          [    33.243] (II) Module glx: vendor="X.Org Foundation"
          [    33.243] 	compiled for 1.20.11, module version = 1.0.0
          [    33.243] 	ABI class: X.Org Server Extension, version 10.0
          [    33.243] (II) LoadModule: "nouveau"
          [    33.248] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
          [    33.285] (II) Module nouveau: vendor="X.Org Foundation"
          [    33.285] 	compiled for 1.20.10, module version = 1.0.17
          [    33.285] 	Module class: X.Org Video Driver
          [    33.285] 	ABI class: X.Org Video Driver, version 24.1
          [    33.285] (II) NOUVEAU driver Date:   Sat Jan 23 12:24:42 2021 -0500
          [    33.285] (II) NOUVEAU driver for NVIDIA chipset families :
          [    33.285] 	RIVA TNT            (NV04)
          [    33.285] 	RIVA TNT2           (NV05)
          [    33.285] 	GeForce 256         (NV10)
          [    33.285] 	GeForce 2           (NV11, NV15)
          [    33.285] 	GeForce 4MX         (NV17, NV18)
          [    33.285] 	GeForce 3           (NV20)
          [    33.285] 	GeForce 4Ti         (NV25, NV28)
          [    33.288] 	GeForce FX          (NV3x)
          [    33.288] 	GeForce 6           (NV4x)
          [    33.288] 	GeForce 7           (G7x)
          [    33.289] 	GeForce 8           (G8x)
          [    33.289] 	GeForce 9           (G9x)
          [    33.289] 	GeForce GTX 2xx/3xx (GT2xx)
          [    33.289] 	GeForce GTX 4xx/5xx (GFxxx)
          [    33.289] 	GeForce GTX 6xx/7xx (GKxxx)
          [    33.289] 	GeForce GTX 9xx     (GMxxx)
          [    33.289] 	GeForce GTX 10xx    (GPxxx)
          [    33.289] (++) using VT number 7
          [    33.445] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -19
          [    33.446] (EE) No devices detected.
          [    33.446] (EE) 
          Fatal server error:
          [    33.446] (EE) no screens found(EE) 
          [    33.446] (EE) 
          Please consult the The X.Org Foundation support 
          	 at http://wiki.x.org
           for help. 
          [    33.446] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
          [    33.446] (EE) 
          [    33.448] (EE) Server terminated with error (1). Closing log file.

          (slimski.log)

          envlang received as: de_DE
          slimski: waiting for X server to begin accepting connections
          Giving up.
          slimski: unable to connect to X server
          

          So I’m back to 4.9.0-326-antix.1-686-smp-pae, which works great in antiX 21 test USB-stick, and for everyday usage I’m still on antiX 19 using 4.19.0-256-antix.1-686-smp-pae with old nvidia proprietary drivers, allowing way better graphics performance on this device than nouveau still.

          Regards
          Robin

          Attachments:

          Windows is like a submarine. Open a window and serious problems will start.

          #91617
          Member
          Robin

            Just for comparison, I’ve installed latest debian default kernel on antiX 21, since I’ve read while searching for a solution for this nouveau issue in 5.10 kernel from above, that these issues should vanish in 5.15 kernel magically. In the repos doesn’t seem to exist any 5.15 kernel, so I installed latest available default debian kernel from the backport repos:

            linux-image-5.19.0-0.deb11.2-686-pae:
              Installiert:           5.19.11-1~bpo11+1
              Installationskandidat: 5.19.11-1~bpo11+1
              Versionstabelle:
             *** 5.19.11-1~bpo11+1 100
                    100 http://deb.debian.org/debian bullseye-backports/main i386 Packages
                    100 /var/lib/dpkg/status

            And what should I say, actually the issue from the 5.10 kernel is fixed, it boots antiX straight up to desktop. It even uses nouveau driver on a speed and clean view I’ve never seen from nouveau ever before here. This comes very near already to the proprietary nvidia drivers. Will need to get some further stress testing, but it looks promising, really. For now it seems to run absolutely stable. Maybe I can get rid of the proprietary nvidia stuff in near future and switch to 5.x kernel series for everyday work… I’m writing these lines from this very system right now. It’s amazing! Here the details:

            (inxi -zv8)

            System:    Kernel: 5.19.0-0.deb11.2-686-pae i686 bits: 32 compiler: gcc v: 10.2.1 
                       parameters: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all 
                       Desktop: IceWM 2.9.4 dm: N/A Distro: antiX-21_386-full Grup Yorum 31 October 2021 
                       base: Debian GNU/Linux 11 (bullseye) 
            Machine:   Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: N/A Chassis: No Enclosure type: 1 
                       serial: N/A 
                       Mobo: Notebook model: RIM2000 serial: N/A BIOS: Phoenix v: RIM00F0A date: 05/27/2005 
            Battery:   ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) volts: 16.6 min: 14.8 
                       model: ARIMA LI4403A type: Unknown serial: <filter> status: Full 
            Memory:    RAM: total: 1.96 GiB used: 368.5 MiB (18.3%) 
                       Array-1: capacity: 3 GiB note: check slots: 2 EC: None max-module-size: 1024 MiB note: est. 
                       voltage: 3.3 
                       Device-1: M1 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous 
                       bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
                       Device-2: M2 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous 
                       bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
            PCI Slots: Message: No PCI Slot data found. 
            CPU:       Info: Single Core model: Intel Pentium M socket: U1 bits: 32 type: MCP arch: M Dothan family: 6 
                       model-id: D (13) stepping: 8 microcode: 20 cache: L1: 32 KiB L2: 2 MiB bogomips: 3457 
                       Speed: 800 MHz min/max: 800/1733 MHz base/boost: 1733/500 volts: 3.3 V Core speed (MHz): 1: 800 
                       Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae pbe pge pse 
                       pti sep ss sse sse2 tm tm2 tsc vme 
                       Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported 
                       Type: l1tf mitigation: PTE Inversion 
                       Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
                       Type: meltdown mitigation: PTI 
                       Type: mmio_stale_data status: Unknown: No mitigations 
                       Type: retbleed status: Not affected 
                       Type: spec_store_bypass status: Vulnerable 
                       Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
                       Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected 
                       Type: srbds status: Not affected 
                       Type: tsx_async_abort status: Not affected 
            Graphics:  Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: nouveau v: kernel bus-ID: 01:00.0 
                       chip-ID: 10de:0148 class-ID: 0300 
                       Display: server: X.Org 1.20.11 driver: loaded: nouveau unloaded: fbdev,modesetting,vesa alternate: nv 
                       display-ID: :0.0 screens: 1 
                       Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 380x238mm (15.0x9.4") s-diag: 448mm (17.7") 
                       Monitor-1: LVDS-1 res: 1440x900 hz: 60 dpi: 100 size: 367x230mm (14.4x9.1") diag: 433mm (17.1") 
                       OpenGL: renderer: NV43 v: 2.1 Mesa 20.3.5 direct render: Yes 
            Audio:     Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks driver: snd_hda_intel 
                       v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403 
                       Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation driver: saa7134 
                       v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480 
                       Sound Server-1: ALSA v: k5.19.0-0.deb11.2-686-pae running: yes 
            Network:   Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 port: 2000 
                       bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200 
                       IF: eth0 state: down mac: <filter> 
                       Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq port: 2000 
                       bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280 
                       IF: eth1 state: up mac: <filter> 
                       IP v4: <filter> scope: global broadcast: <filter> 
                       IP v6: <filter> scope: link 
                       WAN IP: <filter> 
            Bluetooth: Message: No bluetooth data found. 
            Logical:   Message: No logical block device data found. 
            RAID:      Message: No RAID data found. 
            Drives:    Local Storage: total: 151.75 GiB used: 91.46 GiB (60.3%) 
                       ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A family: Momentus 5400.2 size: 93.16 GiB 
                       block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 3.02 
                       temp: 51 C scheme: MBR 
                       SMART: yes state: enabled health: PASSED on: 7y 259d 4h cycles: 9857 
                       ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk size: 58.59 GiB block-size: 
                       physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 8.01 scheme: MBR 
                       SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
                       Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B dev-links: cdrom,cdrw,dvd,dvdrw 
                       Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running 
            Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) used: 19.68 GiB (34.2%) fs: ext4 
                       block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb 
                       uuid: 862f493d-6951-444f-a3f6-734244b241e7 
                       ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 5.4 MiB (11.1%) fs: vfat 
                       block-size: 512 B dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 
                       ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) used: 34.65 GiB (83.2%) fs: ext3 
                       block-size: 4096 B dev: /dev/sda7 maj-min: 8:7 label: /daten3 
                       uuid: c1bc867a-ec28-436d-831b-e47f334471ce 
                       ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) fs: ext3 
                       block-size: 4096 B dev: /dev/sda8 maj-min: 8:8 label: /daten4 
                       uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da 
                       ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) fs: ext3 
                       block-size: 4096 B dev: /dev/sda5 maj-min: 8:5 label: /home uuid: 94021be3-c160-4166-a151-92ad72b26f9a 
                       ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 7.95 GiB (81.6%) fs: ext4 
                       block-size: 4096 B dev: /dev/sda6 maj-min: 8:6 label: antiX uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec 
                       ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 4.3 GiB (55.2%) fs: ext4 
                       block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal 
                       uuid: 19eaea0e-493b-4007-8eff-f14aca40363f 
                       ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) fs: ext4 
                       block-size: 4096 B dev: /dev/sda10 maj-min: 8:10 label: N/A uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d 
            Swap:      Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) 
                       ID-1: swap-1 type: partition size: 2.16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda9 maj-min: 8:9 
                       label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 
            Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
            USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 
                       class-ID: 0900 
                       Device-1: 1-1:2 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard driver: hid-generic,usbhid 
                       interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 093a:2533 class-ID: 0300 
                       Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 
                       class-ID: 0900 
                       Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 
                       class-ID: 0900 
                       Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 
                       class-ID: 0900 
                       Device-1: 4-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 
                       rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 serial: <filter> 
            Sensors:   System Temperatures: cpu: 66.4 C mobo: 56.0 C 
                       Fan Speeds (RPM): N/A 
            Repos:     Packages: apt: 1824 lib: 879 
                       Active apt repos in: /etc/apt/sources.list.d/antix.list 
                       1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye main nosystemd nonfree
                       Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 
                       1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free
                       Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
                       1: deb http://ftp.de.debian.org/debian/ bullseye-updates main contrib non-free
                       Active apt repos in: /etc/apt/sources.list.d/debian.list 
                       1: deb http://ftp.de.debian.org/debian/ bullseye main contrib non-free
                       2: deb http://security.debian.org/ bullseye-security main contrib non-free
                       No active apt repos in: /etc/apt/sources.list.d/various.list 
            Processes: CPU top: 5 of 124 
                       1: cpu: 7.0% command: sudo pid: 6517 mem: 4.56 MiB (0.2%) 
                       2: cpu: 4.0% command: zzzfm pid: 5928 mem: 34.3 MiB (1.7%) 
                       3: cpu: 3.1% command: xorg pid: 3998 mem: 50.7 MiB (2.5%) 
                       4: cpu: 1.2% command: gtkdialog pid: 6233 mem: 24.2 MiB (1.2%) 
                       5: cpu: 0.8% command: conky pid: 4420 mem: 8.95 MiB (0.4%) 
                       Memory top: 5 of 124 
                       1: mem: 50.7 MiB (2.5%) command: xorg pid: 3998 cpu: 3.1% 
                       2: mem: 34.3 MiB (1.7%) command: zzzfm pid: 5928 cpu: 4.0% 
                       3: mem: 31.6 MiB (1.5%) command: cmst pid: 4403 cpu: 0.0% 
                       4: mem: 28.1 MiB (1.3%) command: roxterm pid: 4844 cpu: 0.8% 
                       5: mem: 24.2 MiB (1.2%) command: gtkdialog pid: 6233 cpu: 1.2% 
            Info:      Processes: 124 Uptime: 11m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service 
                       Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: roxterm inxi: 3.3.06 
            

            (initrd.log)

            Run custom code before reading boot codes: /live/custom/antiX/0.sh
            Translate to de
            Schrift aufLat15-VGA16 setzen
            setfont /live/locale/fonts/Lat15-VGA16.psf -C /dev/console
            Neue Bildschirmbreite 80
            === initrd bootstrap ==================================================
            initrd init started at 0.36 seconds
            Coldplug loop pid: 131
            Willkommen bei antiX 21 (Grup Yorum) 32-bit pae!
              BusyBox v1.31.1 (2021-02-03 15:54:12 MST) multi-call binary.
              ntfs-3g 2017.3.23AR.3 integrated FUSE 28
                       initrd version: 8.30.14-x08
                         initrd built: Fri, 04 Jun 2021 11:43:21 +0000
                         Total Memory:  2010 M
                          Used Memory:    60 M
                         Linux kernel: 5.19.0-0.deb11.2-686-pae
                         Screen width: 80
                          Kernel arch: i686
                             Hardware: Notebook RIM2000
            Augenblickliche Bootparameter:
                 lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all
            overlay gefunden
            Lade Hardware spezifische Module ...
            Prüfe usb,cd Geräte. Suche nach boot Datei(en) antiX/linuxfs
            Herausgefilterte Geräte  /dev/sr0
            Versuch wiederholen für 15 Sekunden ...
            Neue(s) Gerät(e) /dev/sdb2 /dev/sdb1 /dev/sdb /dev/sr0 gefunden
            mount -t vfat -o umask=000,dmask=002,fmask=113,shortname=winnt,uid=1000,gid=1000 /dev/sdb2 /live/boot-dev
            mount -t ext4 -o ro,noatime /dev/sdb1 /live/boot-dev
            Eingehängtes boot Gerät. Gerät /dev/sdb1 eingehängt auf /live/boot-dev
            boot Gerät Dateisystem: ext4
            boot device model: Flash Disk
            Spent 2.81 seconds looking for boot file(s) antiX/linuxfs
            loop times: 0.37 0.44 0.40
            boot device uuid: 862f493d-6951-444f-a3f6-734244b241e7
            BOOT_MP:    /live/boot-dev
            SQFILE_DEV: /dev/sdb1
            SQFILE_MP   /live/boot-dev
            Starte Generator für Zufallsnummern...
            Speichere zufälligen seed
            Mount file /live/boot-dev/antiX/linuxfs at /live/linux
            mount -t squashfs -o loop,ro /live/boot-dev/antiX/linuxfs /live/linux
            sqfs_vid: ==== 8f7f5d0737879da9f09b8c3ad7b69283
            LD_PATH: /live/linux/lib:/live/linux/lib/i386-linux-gnu:/live/linux/usr/lib
            Loaded 50 module(s)
            squashfs loop ext4 jbd2 mbcache crc16 nls_ascii vfat fat nls_cp437 uas usb_storage hid_generic usbhid hid sr_mod cdrom sd_mod t10_pi crct10dif_generic crc_t10dif crct10dif_common crc64_rocksoft crc64 ehci_pci uhci_hcd ata_generic ahci libahci ata_piix libata scsi_mod scsi_common sdhci_pci sdhci cqhci firewire_ohci firewire_core crc_itu_t dm_crypt dm_mod dax mmc_block mmc_core crc32c_generic overlay battery ehci_hcd usbcore usb_common
            precheck filesystem on /dev/sdb1
            Erstellen aufs ram tmpfs bei /live/aufs-ram       (1560 MB)
            /bin/mount -t tmpfs -o size=1560m,noatime tmpfs /live/aufs-ram
            Mount overlayfs at /live/aufs
            mount -t overlay overlay -o lowerdir=/live/linux,upperdir=/live/aufs-ram/upper,workdir=/live/aufs-ram/work /live/aufs
            Found one video display device
            kill coldplug loop pid: 131
            Erstellen   /media tmpfs bei /live/aufs/media     (10 MB)
            /bin/mount -t tmpfs -o size=10m,noatime tmpfs /live/aufs/media
            Erstellen     /run tmpfs bei /live/aufs/run       (1111 MB)
            /bin/mount -t tmpfs -o size=1111m,mode=755,nodev,noatime tmpfs /live/aufs/run
            Erstellen    /live tmpfs bei /live/aufs/live      (100 MB)
            /bin/mount -t tmpfs -o size=100m,mode=755,noatime tmpfs /live/aufs/live
            Run custom code before: /live/custom/antiX/0.sh
            mount --move /live/aufs-ram /live/aufs/live/aufs-ram
            mount --move /live/boot-dev /live/aufs/live/boot-dev
            mount --move /live/linux /live/aufs/live/linux
            Run custom code after: /live/custom/antiX/0.sh
            Coldplug loop pid: 1198
            Run custom code before running live init.d scripts: /live/custom/antiX/8.sh
            kill coldplug loop pid: 1198
            Das initrd init Programm brauchte 23.30 Sekunden
            ======================================================================

            (live-init.log)

            Thu Oct 27 10:44:53 CEST 2022  /live/etc/init.d/live-usb-save
            live-usb-save: Restore state information
              Restore machine specific state file /etc/udev/rules.d/70-persistent-net.rules
              Restore machine specific state file /var/lib/connman/wifi_0012f006fa18_574b3233_managed_psk/settings
              Restore general state file /etc/fstab.mount
              Restore general state file /var/log/live/persist-save.log
            Thu Oct 27 10:44:53 CEST 2022  /live/etc/init.d/live-L10n
            live-L10n: Lokalisierung der Konsole und Zeitzone
              Einstellung der Zeitzone und der Ortszeit auf Europe/Berlin
              Einstellung des Gebietsschema auf de_DE.UTF-8
            Thu Oct 27 10:44:54 CEST 2022  /live/etc/init.d/live-init
            live-init: Lokalisierung/Konfiguration X-Window
              Alle Geräte werden gemountet
              make-fstab: Remove all dynamic entries from /etc/fstab
              make-fstab: Create new /etc/fstab
              make-fstab: Automount /dev/sda1 at /media/antiX-Frugal
              make-fstab: Automount /dev/sda5 at /media/_home
              make-fstab: Automount /dev/sda6 at /media/antiX
              make-fstab: Automount /dev/sda7 at /media/_daten3
              make-fstab: Automount /dev/sda8 at /media/_daten4
              make-fstab: Automount /dev/sda10 at /media/sda10
              make-fstab: Automount /dev/sdb2 at /media/ANTIX-UEFI
              make-fstab: Put 9 hard drive entries into /etc/fstab
              make-fstab: Put 1 removable entry into /etc/fstab
              Repository-Lokalisierung auf Europe/Berlin
              Menü-Lokalisierung auf /live/etc/init.d/live-init in /etc/skel
              Einstellung xkb-layout auf de,us
              Einstellung xkb-model auf pc105
              Einstellung xkb-variant auf 
              Einstellung xkb-options auf grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll
              CONSOLE KEYMAP: /etc/default/keyboard
              Nach Hardware-spezifischen Video-Module wird gescannt...
              KMS Video-Modul(e) gefunden drm_display_helper drm_ttm_helper nouveau
              Standardbenutzer demo gefunden
            Thu Oct 27 10:45:03 CEST 2022  /live/etc/init.d/live-disable-services
            live-disable-services: Customizing services
              Disabling some services (L, lean)
              Disabling more services (X, Xtralean)

            (Xorg.0.log)

            [    52.484] 
            X.Org X Server 1.20.11
            X Protocol Version 11, Revision 0
            [    52.484] Build Operating System: linux Debian
            [    52.484] Current Operating System: Linux antix1 5.19.0-0.deb11.2-686-pae #1 SMP PREEMPT_DYNAMIC Debian 5.19.11-1~bpo11+1 (2022-10-03) i686
            [    52.484] Kernel command line: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all
            [    52.484] Build Date: 10 November 2021  11:00:13AM
            [    52.484] xorg-server 2:1.20.11-1.0nosystemd1 (http://www.debian.org/support) 
            [    52.484] Current version of pixman: 0.40.0
            [    52.484] 	Before reporting problems, check http://wiki.x.org
            	to make sure that you have the latest version.
            [    52.484] Markers: (--) probed, (**) from config file, (==) default setting,
            	(++) from command line, (!!) notice, (II) informational,
            	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
            [    52.484] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 10:45:35 2022
            [    52.498] (==) Using config directory: "/etc/X11/xorg.conf.d"
            [    52.498] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
            [    52.506] (==) No Layout section.  Using the first Screen section.
            [    52.506] (==) No screen section available. Using defaults.
            [    52.506] (**) |-->Screen "Default Screen Section" (0)
            [    52.506] (**) |   |-->Monitor "<default monitor>"
            [    52.507] (==) No monitor specified for screen "Default Screen Section".
            	Using a default monitor configuration.
            [    52.507] (==) Automatically adding devices
            [    52.507] (==) Automatically enabling devices
            [    52.507] (==) Automatically adding GPU devices
            [    52.507] (==) Max clients allowed: 256, resource mask: 0x1fffff
            [    52.529] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
            [    52.529] 	Entry deleted from font path.
            [    52.531] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
            [    52.531] 	Entry deleted from font path.
            [    52.531] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
            [    52.531] 	Entry deleted from font path.
            [    52.531] (==) FontPath set to:
            	/usr/share/fonts/X11/misc,
            	/usr/share/fonts/X11/100dpi/:unscaled,
            	/usr/share/fonts/X11/Type1,
            	/usr/share/fonts/X11/100dpi,
            	built-ins
            [    52.531] (==) ModulePath set to "/usr/lib/xorg/modules"
            [    52.532] (II) The server relies on udev to provide the list of input devices.
            	If no devices become available, reconfigure udev or disable AutoAddDevices.
            [    52.532] (II) Loader magic: 0x731700
            [    52.532] (II) Module ABI versions:
            [    52.532] 	X.Org ANSI C Emulation: 0.4
            [    52.532] 	X.Org Video Driver: 24.1
            [    52.532] 	X.Org XInput driver : 24.1
            [    52.532] 	X.Org Server Extension : 10.0
            [    52.532] (II) xfree86: Adding drm device (/dev/dri/card0)
            [    52.561] (--) PCI:*(1@0:0:0) 10de:0148:161f:203d rev 162, Mem @ 0xa0000000/67108864, 0xc0000000/134217728, 0x90000000/16777216, BIOS @ 0x????????/131072
            [    52.561] (II) LoadModule: "glx"
            [    52.572] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
            [    52.676] (II) Module glx: vendor="X.Org Foundation"
            [    52.676] 	compiled for 1.20.11, module version = 1.0.0
            [    52.676] 	ABI class: X.Org Server Extension, version 10.0
            [    52.937] (==) Matched nouveau as autoconfigured driver 0
            [    52.937] (==) Matched nv as autoconfigured driver 1
            [    52.937] (==) Matched modesetting as autoconfigured driver 2
            [    52.937] (==) Matched fbdev as autoconfigured driver 3
            [    52.937] (==) Matched vesa as autoconfigured driver 4
            [    52.937] (==) Assigned the driver to the xf86ConfigLayout
            [    52.937] (II) LoadModule: "nouveau"
            [    52.938] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
            [    52.979] (II) Module nouveau: vendor="X.Org Foundation"
            [    52.979] 	compiled for 1.20.10, module version = 1.0.17
            [    52.979] 	Module class: X.Org Video Driver
            [    52.979] 	ABI class: X.Org Video Driver, version 24.1
            [    52.979] (II) LoadModule: "nv"
            [    52.981] (WW) Warning, couldn't open module nv
            [    52.981] (EE) Failed to load module "nv" (module does not exist, 0)
            [    52.981] (II) LoadModule: "modesetting"
            [    52.981] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
            [    52.995] (II) Module modesetting: vendor="X.Org Foundation"
            [    52.996] 	compiled for 1.20.11, module version = 1.20.11
            [    52.996] 	Module class: X.Org Video Driver
            [    52.996] 	ABI class: X.Org Video Driver, version 24.1
            [    52.996] (II) LoadModule: "fbdev"
            [    52.997] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
            [    53.011] (II) Module fbdev: vendor="X.Org Foundation"
            [    53.011] 	compiled for 1.20.0, module version = 0.5.0
            [    53.011] 	Module class: X.Org Video Driver
            [    53.011] 	ABI class: X.Org Video Driver, version 24.0
            [    53.011] (II) LoadModule: "vesa"
            [    53.011] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
            [    53.019] (II) Module vesa: vendor="X.Org Foundation"
            [    53.019] 	compiled for 1.20.9, module version = 2.5.0
            [    53.019] 	Module class: X.Org Video Driver
            [    53.019] 	ABI class: X.Org Video Driver, version 24.1
            [    53.019] (II) NOUVEAU driver Date:   Sat Jan 23 12:24:42 2021 -0500
            [    53.019] (II) NOUVEAU driver for NVIDIA chipset families :
            [    53.019] 	RIVA TNT            (NV04)
            [    53.019] 	RIVA TNT2           (NV05)
            [    53.019] 	GeForce 256         (NV10)
            [    53.020] 	GeForce 2           (NV11, NV15)
            [    53.020] 	GeForce 4MX         (NV17, NV18)
            [    53.020] 	GeForce 3           (NV20)
            [    53.020] 	GeForce 4Ti         (NV25, NV28)
            [    53.020] 	GeForce FX          (NV3x)
            [    53.020] 	GeForce 6           (NV4x)
            [    53.020] 	GeForce 7           (G7x)
            [    53.020] 	GeForce 8           (G8x)
            [    53.020] 	GeForce 9           (G9x)
            [    53.020] 	GeForce GTX 2xx/3xx (GT2xx)
            [    53.020] 	GeForce GTX 4xx/5xx (GFxxx)
            [    53.020] 	GeForce GTX 6xx/7xx (GKxxx)
            [    53.020] 	GeForce GTX 9xx     (GMxxx)
            [    53.021] 	GeForce GTX 10xx    (GPxxx)
            [    53.021] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
            [    53.021] (II) FBDEV: driver for framebuffer: fbdev
            [    53.021] (II) VESA: driver for VESA chipsets: vesa
            [    53.021] (++) using VT number 7
            [    53.029] (II) [drm] nouveau interface version: 1.3.1
            [    53.029] (WW) Falling back to old probe method for modesetting
            [    53.029] (WW) Falling back to old probe method for fbdev
            [    53.029] (II) Loading sub module "fbdevhw"
            [    53.030] (II) LoadModule: "fbdevhw"
            [    53.030] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
            [    53.045] (II) Module fbdevhw: vendor="X.Org Foundation"
            [    53.045] 	compiled for 1.20.11, module version = 0.0.2
            [    53.045] 	ABI class: X.Org Video Driver, version 24.1
            [    53.045] (II) Loading sub module "dri2"
            [    53.045] (II) LoadModule: "dri2"
            [    53.045] (II) Module "dri2" already built-in
            [    53.045] (--) NOUVEAU(0): Chipset: "NVIDIA NV43"
            [    53.045] (II) NOUVEAU(0): Creating default Display subsection in Screen section
            	"Default Screen Section" for depth/fbbpp 24/32
            [    53.045] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
            [    53.045] (==) NOUVEAU(0): RGB weight 888
            [    53.045] (==) NOUVEAU(0): Default visual is TrueColor
            [    53.045] (==) NOUVEAU(0): Using HW cursor
            [    53.045] (==) NOUVEAU(0): Allowed maximum DRI level 2.
            [    53.045] (==) NOUVEAU(0): GLX sync to VBlank enabled.
            [    53.045] (==) NOUVEAU(0): Page flipping enabled
            [    53.045] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
            [    53.045] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
            [    53.045] (II) NOUVEAU(0): Initializing outputs ...
            [    53.083] (II) NOUVEAU(0): Output VGA-1 has no monitor section
            [    53.173] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
            [    53.239] (II) NOUVEAU(0): Output TV-1 has no monitor section
            [    53.239] (II) NOUVEAU(0): 3 crtcs needed for screen.
            [    53.239] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
            [    53.239] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
            [    53.283] (II) NOUVEAU(0): EDID for output VGA-1
            [    53.344] (II) NOUVEAU(0): EDID for output LVDS-1
            [    53.344] (II) NOUVEAU(0): Manufacturer: SEC  Model: 3847  Serial#: 0
            [    53.344] (II) NOUVEAU(0): Year: 2006  Week: 0
            [    53.344] (II) NOUVEAU(0): EDID Version: 1.3
            [    53.344] (II) NOUVEAU(0): Digital Display Input
            [    53.344] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37  vert.: 23
            [    53.344] (II) NOUVEAU(0): Gamma: 2.20
            [    53.344] (II) NOUVEAU(0): No DPMS capabilities specified
            [    53.344] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
            [    53.344] (II) NOUVEAU(0): First detailed timing is preferred mode
            [    53.344] (II) NOUVEAU(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
            [    53.344] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
            [    53.344] (II) NOUVEAU(0): Manufacturer's mask: 0
            [    53.344] (II) NOUVEAU(0): Supported detailed timing:
            [    53.344] (II) NOUVEAU(0): clock: 96.3 MHz   Image Size:  367 x 230 mm
            [    53.344] (II) NOUVEAU(0): h_active: 1440  h_sync: 1504  h_sync_end 1536 h_blank_end 1760 h_border: 0
            [    53.344] (II) NOUVEAU(0): v_active: 900  v_sync: 903  v_sync_end 906 v_blanking: 912 v_border: 0
            [    53.344] (II) NOUVEAU(0): Unknown vendor-specific block f
            [    53.344] (II) NOUVEAU(0):  SAMSUNG
            [    53.344] (II) NOUVEAU(0):  LTN170X2-L02
            [    53.344] (II) NOUVEAU(0): EDID (in hex):
            [    53.344] (II) NOUVEAU(0): 	00ffffffffffff004ca3473800000000
            [    53.344] (II) NOUVEAU(0): 	00100103802517780a87f594574f8c27
            [    53.344] (II) NOUVEAU(0): 	27505400000001010101010101010101
            [    53.344] (II) NOUVEAU(0): 	0101010101019f25a04051840c304020
            [    53.344] (II) NOUVEAU(0): 	33006fe6100000190000000f00000000
            [    53.344] (II) NOUVEAU(0): 	000000000078e6022300000000fe0053
            [    53.344] (II) NOUVEAU(0): 	414d53554e470a2020202020000000fe
            [    53.344] (II) NOUVEAU(0): 	004c544e31373058322d4c30320a00f1
            [    53.344] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
            [    53.344] (II) NOUVEAU(0): Modeline "1440x900"x60.0   96.31  1440 1504 1536 1760  900 903 906 912 -hsync -vsync (54.7 kHz eP)
            [    53.344] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.77  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz)
            [    53.344] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
            [    53.344] (II) NOUVEAU(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
            [    53.344] (II) NOUVEAU(0): Modeline "640x480"x59.9   23.98  640 664 720 800  480 483 487 500 -hsync +vsync (30.0 kHz)
            [    53.344] (II) NOUVEAU(0): Modeline "720x400"x60.0   22.41  720 744 808 896  400 403 413 417 -hsync +vsync (25.0 kHz)
            [    53.344] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
            [    53.344] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.52  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
            [    53.411] (II) NOUVEAU(0): EDID for output TV-1
            [    53.411] (II) NOUVEAU(0): Output VGA-1 disconnected
            [    53.411] (II) NOUVEAU(0): Output LVDS-1 connected
            [    53.411] (II) NOUVEAU(0): Output TV-1 disconnected
            [    53.411] (II) NOUVEAU(0): Using exact sizes for initial modes
            [    53.411] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1440x900 +0+0
            [    53.411] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
            [    53.411] (II) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
            [    53.411] (**) NOUVEAU(0):  Driver mode "1440x900": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
            [    53.411] (II) NOUVEAU(0): Modeline "1440x900"x60.0   96.31  1440 1504 1536 1760  900 903 906 912 -hsync -vsync (54.7 kHz eP)
            [    53.411] (**) NOUVEAU(0):  Mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
            [    53.411] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.77  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz)
            [    53.411] (**) NOUVEAU(0):  Mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
            [    53.411] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
            [    53.411] (**) NOUVEAU(0):  Mode "800x600": 38.3 MHz (scaled from 0.0 MHz), 37.4 kHz, 60.0 Hz
            [    53.411] (II) NOUVEAU(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
            [    53.411] (**) NOUVEAU(0):  Mode "640x480": 24.0 MHz (scaled from 0.0 MHz), 30.0 kHz, 59.9 Hz
            [    53.411] (II) NOUVEAU(0): Modeline "640x480"x59.9   23.98  640 664 720 800  480 483 487 500 -hsync +vsync (30.0 kHz)
            [    53.412] (**) NOUVEAU(0):  Mode "720x400": 22.4 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
            [    53.412] (II) NOUVEAU(0): Modeline "720x400"x60.0   22.41  720 744 808 896  400 403 413 417 -hsync +vsync (25.0 kHz)
            [    53.412] (**) NOUVEAU(0):  Mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
            [    53.412] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
            [    53.412] (**) NOUVEAU(0):  Mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
            [    53.412] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.52  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
            [    53.412] (==) NOUVEAU(0): DPI set to (96, 96)
            [    53.412] (II) Loading sub module "fb"
            [    53.412] (II) LoadModule: "fb"
            [    53.412] (II) Loading /usr/lib/xorg/modules/libfb.so
            [    53.414] (II) Module fb: vendor="X.Org Foundation"
            [    53.414] 	compiled for 1.20.11, module version = 1.0.0
            [    53.414] 	ABI class: X.Org ANSI C Emulation, version 0.4
            [    53.414] (II) Loading sub module "shadowfb"
            [    53.414] (II) LoadModule: "shadowfb"
            [    53.415] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
            [    53.419] (II) Module shadowfb: vendor="X.Org Foundation"
            [    53.419] 	compiled for 1.20.11, module version = 1.0.0
            [    53.419] 	ABI class: X.Org ANSI C Emulation, version 0.4
            [    53.419] (II) UnloadModule: "modesetting"
            [    53.419] (II) Unloading modesetting
            [    53.419] (II) UnloadModule: "fbdev"
            [    53.419] (II) Unloading fbdev
            [    53.419] (II) UnloadSubModule: "fbdevhw"
            [    53.419] (II) Unloading fbdevhw
            [    53.419] (II) UnloadModule: "vesa"
            [    53.419] (II) Unloading vesa
            [    53.428] (II) NOUVEAU(0): Channel setup complete.
            [    53.446] (II) NOUVEAU(0): Hardware support for Present enabled
            [    53.446] (II) NOUVEAU(0): [DRI2] Setup complete
            [    53.446] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
            [    53.446] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
            [    53.446] (II) Loading sub module "exa"
            [    53.446] (II) LoadModule: "exa"
            [    53.446] (II) Loading /usr/lib/xorg/modules/libexa.so
            [    53.447] (II) Module exa: vendor="X.Org Foundation"
            [    53.447] 	compiled for 1.20.11, module version = 2.6.0
            [    53.447] 	ABI class: X.Org Video Driver, version 24.1
            [    53.447] (II) EXA(0): Driver allocated offscreen pixmaps
            [    53.447] (II) EXA(0): Driver registered support for the following operations:
            [    53.447] (II)         Solid
            [    53.447] (II)         Copy
            [    53.447] (II)         Composite (RENDER acceleration)
            [    53.447] (II)         UploadToScreen
            [    53.447] (II)         DownloadFromScreen
            [    53.447] (==) NOUVEAU(0): Backing store enabled
            [    53.447] (==) NOUVEAU(0): Silken mouse enabled
            [    53.447] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
            [    53.447] (II) NOUVEAU(0): [XvMC] Extension initialized.
            [    53.447] (==) NOUVEAU(0): DPMS enabled
            [    53.448] (II) Initializing extension Generic Event Extension
            [    53.450] (II) Initializing extension SHAPE
            [    53.451] (II) Initializing extension MIT-SHM
            [    53.452] (II) Initializing extension XInputExtension
            [    53.453] (II) Initializing extension XTEST
            [    53.454] (II) Initializing extension BIG-REQUESTS
            [    53.454] (II) Initializing extension SYNC
            [    53.455] (II) Initializing extension XKEYBOARD
            [    53.459] (II) Initializing extension XC-MISC
            [    53.460] (II) Initializing extension SECURITY
            [    53.460] (II) Initializing extension XFIXES
            [    53.461] (II) Initializing extension RENDER
            [    53.461] (II) Initializing extension RANDR
            [    53.462] (II) Initializing extension COMPOSITE
            [    53.463] (II) Initializing extension DAMAGE
            [    53.466] (II) Initializing extension MIT-SCREEN-SAVER
            [    53.466] (II) Initializing extension DOUBLE-BUFFER
            [    53.467] (II) Initializing extension RECORD
            [    53.467] (II) Initializing extension DPMS
            [    53.468] (II) Initializing extension Present
            [    53.468] (II) Initializing extension DRI3
            [    53.468] (II) Initializing extension X-Resource
            [    53.469] (II) Initializing extension XVideo
            [    53.469] (II) Initializing extension XVideo-MotionCompensation
            [    53.470] (II) Initializing extension SELinux
            [    53.470] (II) SELinux: Disabled on system
            [    53.470] (II) Initializing extension GLX
            [    54.873] (II) AIGLX: Loaded and initialized nouveau
            [    54.873] (II) GLX: Initialized DRI2 GL provider for screen 0
            [    54.873] (II) Initializing extension XFree86-VidModeExtension
            [    54.874] (II) Initializing extension XFree86-DGA
            [    54.875] (II) Initializing extension XFree86-DRI
            [    54.875] (II) Initializing extension DRI2
            [    54.879] (II) NOUVEAU(0): NVEnterVT is called.
            [    54.880] (II) NOUVEAU(0): Setting screen physical size to 380 x 238
            [    54.880] resize called 1440 900
            [    55.086] (II) config/udev: Adding input device Power Button (/dev/input/event6)
            [    55.086] (**) Power Button: Applying InputClass "evdev keyboard catchall"
            [    55.086] (**) Power Button: Applying InputClass "libinput keyboard catchall"
            [    55.086] (II) LoadModule: "libinput"
            [    55.087] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
            [    55.124] (II) Module libinput: vendor="X.Org Foundation"
            [    55.124] 	compiled for 1.20.8, module version = 0.30.0
            [    55.124] 	Module class: X.Org XInput Driver
            [    55.124] 	ABI class: X.Org XInput driver, version 24.1
            [    55.124] (II) Using input driver 'libinput' for 'Power Button'
            [    55.124] (**) Power Button: always reports core events
            [    55.124] (**) Option "Device" "/dev/input/event6"
            [    55.125] (**) Option "_source" "server/udev"
            [    55.163] (II) event6  - Power Button: is tagged by udev as: Keyboard
            [    55.164] (II) event6  - Power Button: device is a keyboard
            [    55.164] (II) event6  - Power Button: device removed
            [    55.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event6"
            [    55.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
            [    55.165] (**) Option "xkb_model" "pc105"
            [    55.165] (**) Option "xkb_layout" "de,us"
            [    55.165] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
            [    55.241] (II) event6  - Power Button: is tagged by udev as: Keyboard
            [    55.242] (II) event6  - Power Button: device is a keyboard
            [    55.244] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
            [    55.244] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
            [    55.244] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
            [    55.244] (II) Using input driver 'libinput' for 'Video Bus'
            [    55.244] (**) Video Bus: always reports core events
            [    55.244] (**) Option "Device" "/dev/input/event7"
            [    55.244] (**) Option "_source" "server/udev"
            [    55.248] (II) event7  - Video Bus: is tagged by udev as: Keyboard
            [    55.248] (II) event7  - Video Bus: device is a keyboard
            [    55.249] (II) event7  - Video Bus: device removed
            [    55.249] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event7"
            [    55.249] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
            [    55.249] (**) Option "xkb_model" "pc105"
            [    55.249] (**) Option "xkb_layout" "de,us"
            [    55.249] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
            [    55.253] (II) event7  - Video Bus: is tagged by udev as: Keyboard
            [    55.254] (II) event7  - Video Bus: device is a keyboard
            [    55.255] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
            [    55.256] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
            [    55.256] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
            [    55.256] (II) Using input driver 'libinput' for 'Video Bus'
            [    55.256] (**) Video Bus: always reports core events
            [    55.256] (**) Option "Device" "/dev/input/event4"
            [    55.256] (**) Option "_source" "server/udev"
            [    55.260] (II) event4  - Video Bus: is tagged by udev as: Keyboard
            [    55.260] (II) event4  - Video Bus: device is a keyboard
            [    55.260] (II) event4  - Video Bus: device removed
            [    55.260] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event4"
            [    55.261] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
            [    55.261] (**) Option "xkb_model" "pc105"
            [    55.261] (**) Option "xkb_layout" "de,us"
            [    55.261] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
            [    55.266] (II) event4  - Video Bus: is tagged by udev as: Keyboard
            [    55.266] (II) event4  - Video Bus: device is a keyboard
            [    55.268] (II) config/udev: Adding input device Power Button (/dev/input/event5)
            [    55.268] (**) Power Button: Applying InputClass "evdev keyboard catchall"
            [    55.268] (**) Power Button: Applying InputClass "libinput keyboard catchall"
            [    55.268] (II) Using input driver 'libinput' for 'Power Button'
            [    55.268] (**) Power Button: always reports core events
            [    55.268] (**) Option "Device" "/dev/input/event5"
            [    55.268] (**) Option "_source" "server/udev"
            [    55.271] (II) event5  - Power Button: is tagged by udev as: Keyboard
            [    55.272] (II) event5  - Power Button: device is a keyboard
            [    55.272] (II) event5  - Power Button: device removed
            [    55.272] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event5"
            [    55.272] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
            [    55.272] (**) Option "xkb_model" "pc105"
            [    55.272] (**) Option "xkb_layout" "de,us"
            [    55.272] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
            [    55.277] (II) event5  - Power Button: is tagged by udev as: Keyboard
            [    55.277] (II) event5  - Power Button: device is a keyboard
            [    55.279] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
            [    55.279] (II) No input driver specified, ignoring this device.
            [    55.279] (II) This device may have been added with another device file.
            [    55.281] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
            [    55.281] (II) No input driver specified, ignoring this device.
            [    55.281] (II) This device may have been added with another device file.
            [    55.282] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event9)
            [    55.282] (II) No input driver specified, ignoring this device.
            [    55.282] (II) This device may have been added with another device file.
            [    55.283] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event10)
            [    55.283] (II) No input driver specified, ignoring this device.
            [    55.283] (II) This device may have been added with another device file.
            [    55.284] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event11)
            [    55.284] (II) No input driver specified, ignoring this device.
            [    55.285] (II) This device may have been added with another device file.
            [    55.286] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event12)
            [    55.286] (II) No input driver specified, ignoring this device.
            [    55.286] (II) This device may have been added with another device file.
            [    55.287] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event13)
            [    55.287] (II) No input driver specified, ignoring this device.
            [    55.287] (II) This device may have been added with another device file.
            [    55.288] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event14)
            [    55.288] (II) No input driver specified, ignoring this device.
            [    55.288] (II) This device may have been added with another device file.
            [    55.289] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event15)
            [    55.289] (II) No input driver specified, ignoring this device.
            [    55.289] (II) This device may have been added with another device file.
            [    55.291] (II) config/udev: Adding input device Gaming Mouse (/dev/input/event1)
            [    55.291] (**) Gaming Mouse: Applying InputClass "evdev pointer catchall"
            [    55.291] (**) Gaming Mouse: Applying InputClass "libinput pointer catchall"
            [    55.291] (II) Using input driver 'libinput' for 'Gaming Mouse'
            [    55.291] (**) Gaming Mouse: always reports core events
            [    55.291] (**) Option "Device" "/dev/input/event1"
            [    55.291] (**) Option "_source" "server/udev"
            [    55.355] (II) event1  - Gaming Mouse: is tagged by udev as: Mouse
            [    55.355] (II) event1  - Gaming Mouse: device is a pointer
            [    55.356] (II) event1  - Gaming Mouse: device removed
            [    55.358] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:093A:2533.0001/input/input2/event1"
            [    55.358] (II) XINPUT: Adding extended input device "Gaming Mouse" (type: MOUSE, id 10)
            [    55.359] (**) Option "AccelerationScheme" "none"
            [    55.359] (**) Gaming Mouse: (accel) selected scheme none/0
            [    55.359] (**) Gaming Mouse: (accel) acceleration factor: 2.000
            [    55.359] (**) Gaming Mouse: (accel) acceleration threshold: 4
            [    55.423] (II) event1  - Gaming Mouse: is tagged by udev as: Mouse
            [    55.423] (II) event1  - Gaming Mouse: device is a pointer
            [    55.425] (II) config/udev: Adding input device Gaming Mouse (/dev/input/mouse0)
            [    55.425] (II) No input driver specified, ignoring this device.
            [    55.425] (II) This device may have been added with another device file.
            [    55.427] (II) config/udev: Adding input device Gaming Mouse Keyboard (/dev/input/event2)
            [    55.427] (**) Gaming Mouse Keyboard: Applying InputClass "evdev keyboard catchall"
            [    55.427] (**) Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
            [    55.427] (II) Using input driver 'libinput' for 'Gaming Mouse Keyboard'
            [    55.428] (**) Gaming Mouse Keyboard: always reports core events
            [    55.428] (**) Option "Device" "/dev/input/event2"
            [    55.428] (**) Option "_source" "server/udev"
            [    55.432] (II) event2  - Gaming Mouse Keyboard: is tagged by udev as: Keyboard
            [    55.433] (II) event2  - Gaming Mouse Keyboard: device is a keyboard
            [    55.433] (II) event2  - Gaming Mouse Keyboard: device removed
            [    55.434] (II) libinput: Gaming Mouse Keyboard: needs a virtual subdevice
            [    55.434] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:093A:2533.0002/input/input4/event2"
            [    55.434] (II) XINPUT: Adding extended input device "Gaming Mouse Keyboard" (type: MOUSE, id 11)
            [    55.434] (**) Option "AccelerationScheme" "none"
            [    55.434] (**) Gaming Mouse Keyboard: (accel) selected scheme none/0
            [    55.434] (**) Gaming Mouse Keyboard: (accel) acceleration factor: 2.000
            [    55.434] (**) Gaming Mouse Keyboard: (accel) acceleration threshold: 4
            [    55.439] (II) event2  - Gaming Mouse Keyboard: is tagged by udev as: Keyboard
            [    55.439] (II) event2  - Gaming Mouse Keyboard: device is a keyboard
            [    55.441] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
            [    55.441] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
            [    55.441] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
            [    55.441] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
            [    55.441] (**) AT Translated Set 2 keyboard: always reports core events
            [    55.441] (**) Option "Device" "/dev/input/event0"
            [    55.442] (**) Option "_source" "server/udev"
            [    55.445] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
            [    55.445] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
            [    55.448] (II) event0  - AT Translated Set 2 keyboard: device removed
            [    55.448] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
            [    55.448] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
            [    55.448] (**) Option "xkb_model" "pc105"
            [    55.448] (**) Option "xkb_layout" "de,us"
            [    55.448] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
            [    55.452] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
            [    55.453] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
            [    55.456] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
            [    55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
            [    55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
            [    55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
            [    55.457] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
            [    55.457] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad"
            [    55.457] (II) LoadModule: "synaptics"
            [    55.458] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
            [    55.461] (II) Module synaptics: vendor="X.Org Foundation"
            [    55.461] 	compiled for 1.20.8, module version = 1.9.1
            [    55.461] 	Module class: X.Org XInput Driver
            [    55.461] 	ABI class: X.Org XInput driver, version 24.1
            [    55.461] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
            [    55.461] (**) SynPS/2 Synaptics TouchPad: always reports core events
            [    55.461] (**) Option "Device" "/dev/input/event16"
            [    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 62)
            [    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 113)
            [    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
            [    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
            [    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
            [    55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
            [    55.462] (**) Option "VertEdgeScroll" "1"
            [    55.462] (**) Option "CornerCoasting" "1"
            [    55.462] (**) Option "VertTwoFingerScroll" "1"
            [    55.462] (**) Option "HorizTwoFingerScroll" "1"
            [    55.462] (**) Option "RBCornerButton" "9"
            [    55.462] (**) Option "LBCornerButton" "8"
            [    55.462] (**) Option "TapButton1" "1"
            [    55.462] (**) Option "TapButton2" "2"
            [    55.462] (**) Option "TapButton3" "3"
            [    55.463] (**) Option "CircularScrolling" "1"
            [    55.463] (**) Option "CircScrollTrigger" "7"
            [    55.463] (**) Option "MinSpeed" "0.5"
            [    55.463] (**) Option "MaxSpeed" "1.0"
            [    55.463] (**) Option "AccelFactor" "0.075"
            [    55.463] (**) Option "CoastingSpeed" "8"
            [    55.463] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
            [    55.463] (**) SynPS/2 Synaptics TouchPad: always reports core events
            [    55.463] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input18/event16"
            [    55.463] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
            [    55.463] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.0
            [    55.463] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 2.00
            [    55.464] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.075
            [    55.464] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
            [    55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
            [    55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
            [    55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
            [    55.465] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
            [    55.466] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
            [    55.466] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
            [    55.481] (**) Gaming Mouse Keyboard: Applying InputClass "evdev keyboard catchall"
            [    55.481] (**) Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
            [    55.481] (II) Using input driver 'libinput' for 'Gaming Mouse Keyboard'
            [    55.481] (**) Gaming Mouse Keyboard: always reports core events
            [    55.481] (**) Option "Device" "/dev/input/event2"
            [    55.481] (**) Option "_source" "_driver/libinput"
            [    55.481] (II) libinput: Gaming Mouse Keyboard: is a virtual subdevice
            [    55.481] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:093A:2533.0002/input/input4/event2"
            [    55.481] (II) XINPUT: Adding extended input device "Gaming Mouse Keyboard" (type: KEYBOARD, id 14)
            [    55.481] (**) Option "xkb_model" "pc105"
            [    55.481] (**) Option "xkb_layout" "de,us"
            [    55.481] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
            [    60.812] (II) NOUVEAU(0): EDID vendor "SEC", prod id 14407
            [    60.812] (II) NOUVEAU(0): Printing DDC gathered Modelines:
            [    60.812] (II) NOUVEAU(0): Modeline "1440x900"x0.0   96.31  1440 1504 1536 1760  900 903 906 912 -hsync -vsync (54.7 kHz eP)
            [    61.020] (II) NOUVEAU(0): EDID vendor "SEC", prod id 14407
            [    61.020] (II) NOUVEAU(0): Printing DDC gathered Modelines:
            [    61.020] (II) NOUVEAU(0): Modeline "1440x900"x0.0   96.31  1440 1504 1536 1760  900 903 906 912 -hsync -vsync (54.7 kHz eP)
            

            So, maybe this piece of information contains some hints how to fix the issue on 5.10 antiX kernel, or what other options exist? Would rather like to run an antiX kernel than this debian one…

            Regards
            Robin

            Attachments:

            Windows is like a submarine. Open a window and serious problems will start.

            #91619
            Forum Admin
            anticapitalista

              @Robin – have you tried the default 5.10 Debian kernel?
              If that works, then there is something wrong with our 5.10 kernel on some hard drive.
              If not, then the fault lies with the 5.10 series.

              Philosophers have interpreted the world in many ways; the point is to change it.

              antiX with runit - leaner and meaner.

              #91703
              Member
              Robin

                hello @anticapitalista ,

                have you tried the default 5.10 Debian kernel?
                If that works, then there is something wrong with our 5.10 kernel on some hard drive.
                If not, then the fault lies with the 5.10 series.

                I had not checked this before, but I’ve managed to do some testing early this morning. Here the results:

                Since there was no debian kernel 5.10.142 I have tested the nearest available, one before and one after, (5.10.140-1 and 5.10.149-2 both), which come whith packages linux-image-5.10.0-18-686-pae (signed) and linux-image-5.10.0-19-686-pae (signed). As with the most recent 5.19.0-0.deb11.2-686-pae kernel from debian backports antix boots with them straight up to the desktop, no issues. The 5.19 kernel comes with a perfecly stable, fast and fluid noveau (at least when running single head this one is absoulutely equivalent to what I was used from proprietary nvidia driver stuff, but I had not time to test in a multihead setup with an additional screen or TV out by now.).

                So I decided to re-check your 5.10.142-antix.2 kernel, I apt-purged it from the system first, then remastered, installed it anew from repos, using apt. But after remaster and live kernel update it fails again with the same issue, not detecting the graphics card properly. So unfortunately this was not an arbitrary faulty install. Then I gave the 5.10.137-antix.1-686-smp-pae kernel a try, same issue with this one, it stops on console login (It is possible to force them into desktop using the fb mode instead of noveau, but only blurry, flickering and lowres screen then, no way to change it to proper resolution using xrandr.) So I reinstalled the 5.19 debian again to the very stick, without changing anything else, and again it ran straight through to desktop.

                While installing the 5.x kernels I noticed an additional issue, which might get addressed also (but it doesn’t keep the kernels from booting to desktop, the debian kernels suffer from it also):

                $ sudo apt-get install linux-headers-5.10.142-antix.2-686-smp-pae linux-image-5.10.142-antix.2-686-smp-pae
                Paketlisten werden gelesen… Fertig
                Abhängigkeitsbaum wird aufgebaut… Fertig
                Statusinformationen werden eingelesen… Fertig
                Die folgenden NEUEN Pakete werden installiert:
                  linux-headers-5.10.142-antix.2-686-smp-pae linux-image-5.10.142-antix.2-686-smp-pae
                0 aktualisiert, 2 neu installiert, 0 zu entfernen und 267 nicht aktualisiert.
                Es müssen 53,8 MB an Archiven heruntergeladen werden.
                Nach dieser Operation werden 224 MB Plattenplatz zusätzlich benutzt.
                Holen:1 http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye/main i386 linux-headers-5.10.142-antix.2-686-smp-pae i386 5.10.142-antix.2-686-smp-pae-1 [8.007 kB]
                Holen:2 http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye/main i386 linux-image-5.10.142-antix.2-686-smp-pae i386 5.10.142-antix.2-686-smp-pae-1 [45,8 MB]
                Es wurden 53,8 MB in 44 s geholt (1.224 kB/s).                                                             
                Vormals nicht ausgewähltes Paket linux-headers-5.10.142-antix.2-686-smp-pae wird gewählt.
                (Lese Datenbank ... 288621 Dateien und Verzeichnisse sind derzeit installiert.)
                Vorbereitung zum Entpacken von .../linux-headers-5.10.142-antix.2-686-smp-pae_5.10.142-antix.2-686-smp-pae-1_i386.deb ...
                Entpacken von linux-headers-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) ...
                Vormals nicht ausgewähltes Paket linux-image-5.10.142-antix.2-686-smp-pae wird gewählt.
                Vorbereitung zum Entpacken von .../linux-image-5.10.142-antix.2-686-smp-pae_5.10.142-antix.2-686-smp-pae-1_i386.deb ...
                Entpacken von linux-image-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) ...
                linux-image-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) wird eingerichtet ...
                dkms: running auto installation service for kernel 5.10.142-antix.2-686-smp-pae:
                Kernel preparation unnecessary for this kernel.  Skipping...
                Building module:
                cleaning build area...
                make -j1 KERNELRELEASE=5.10.142-antix.2-686-smp-pae KVER=5.10.142-antix.2-686-smp-pae......
                cleaning build area...
                DKMS: build completed.
                wl.ko:
                Running module version sanity check.
                 - Original module
                   - No original module exists within this kernel
                 - Installation
                   - Installing to /lib/modules/5.10.142-antix.2-686-smp-pae/updates/dkms/
                depmod....
                Warning: Unable to find an initial ram disk that I know how to handle.
                Will not try to make an initrd.
                DKMS: install completed.
                Kernel preparation unnecessary for this kernel.  Skipping...
                Building module:
                cleaning build area...
                make -j1 KERNELRELEASE=5.10.142-antix.2-686-smp-pae -C /lib/modules/5.10.142-antix.2-686-smp-pae/build M=/var/lib/dkms/exfat/5.9/build...(bad exit status: 2)
                Error! Bad return status for module build on kernel: 5.10.142-antix.2-686-smp-pae (i686)
                Consult /var/lib/dkms/exfat/5.9/build/make.log for more information.
                .
                update-initramfs: Generating /boot/initrd.img-5.10.142-antix.2-686-smp-pae
                cryptsetup: ERROR: Couldn't resolve device overlay
                cryptsetup: WARNING: Couldn't determine root device
                I: The initramfs will attempt to resume from /dev/sda9
                I: (UUID=2d151628-e6f1-4e23-a8a6-7820d17b8a14)
                I: Set the RESUME variable to override this.
                linux-headers-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) wird eingerichtet ...
                
                
                $ cat /var/lib/dkms/exfat/5.9/build/make.log
                DKMS make.log for exfat-5.9 for kernel 5.10.142-antix.2-686-smp-pae (i686)
                Fr 28. Okt 03:13:11 CEST 2022
                make: Verzeichnis „/usr/src/linux-headers-5.10.142-antix.2-686-smp-pae“ wird betreten
                  CC [M]  /var/lib/dkms/exfat/5.9/build/inode.o
                In file included from /var/lib/dkms/exfat/5.9/build/exfat_fs.h:14,
                                 from /var/lib/dkms/exfat/5.9/build/inode.c:16:
                /var/lib/dkms/exfat/5.9/build/compat.h:12:2: error: #error "This driver doesn't support v5.8+, " "please use the included driver from your kernel"
                   12 | #error "This driver doesn't support v5.8+, " \
                      |  ^~~~~
                /var/lib/dkms/exfat/5.9/build/inode.c: In function ‘exfat_readpages’:
                /var/lib/dkms/exfat/5.9/build/inode.c:367:9: error: implicit declaration of function ‘mpage_readpages’; did you mean ‘mpage_readpage’? [-Werror=implicit-function-declaration]
                  367 |  return mpage_readpages(mapping, pages, nr_pages, exfat_get_block);
                      |         ^~~~~~~~~~~~~~~
                      |         mpage_readpage
                cc1: some warnings being treated as errors
                make[1]: *** [scripts/Makefile.build:286: /var/lib/dkms/exfat/5.9/build/inode.o] Fehler 1
                make: *** [Makefile:1845: /var/lib/dkms/exfat/5.9/build] Fehler 2
                make: Verzeichnis „/usr/src/linux-headers-5.10.142-antix.2-686-smp-pae“ wird verlassen

                And then, I noticed the .md5 chcksum files of vmlinuz, initrd and linuxfs files the are lost sometimes when remastering and/or rolling back, so there is no checksum any longer present. Couldn’t find out what triggers the loss, sometimes it happens, and sometimes the old .md5 file is perfectly backuped. But the system works still without these, and I believe they can easily get recreated manually if needed, if I’m not mistaken. Does antiX check the files against them while starting up?

                Technical details:

                The logs from debian 5.10.0-18 and 5.10.0-19 look exactly like the one from 5.19.0 I’ve posted above, so I don’t repost it here (in case you need them, just let me know, I’ve stored them) Here’s what I’ve got from 5.10.137-antix.1-686-smp-pae kernel:

                (inxi -zv8)

                System:
                  Kernel: 5.10.137-antix.1-686-smp-pae i686 bits: 32 compiler: gcc v: 10.2.1 
                  parameters: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF 
                  mount=all xorg=nouveau 
                  Console: tty 1 Distro: antiX-21_386-full Grup Yorum 31 October 2021 
                  base: Debian GNU/Linux 11 (bullseye) 
                Machine:
                  Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: N/A 
                  Chassis: No Enclosure type: 1 serial: N/A 
                  Mobo: Notebook model: RIM2000 serial: N/A BIOS: Phoenix v: RIM00F0A 
                  date: 05/27/2005 
                Battery:
                  ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) 
                  volts: 16.6 min: 14.8 model: ARIMA LI4403A type: Unknown serial: <filter> 
                  status: Full 
                Memory:
                  RAM: total: 1.96 GiB used: 288.3 MiB (14.3%) 
                  Array-1: capacity: 3 GiB note: check slots: 2 EC: None 
                  max-module-size: 1024 MiB note: est. voltage: 3.3 
                  Device-1: M1 size: 1024 MiB info: double-bank speed: N/A type: DDR 
                  detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A 
                  part-no: Not Specified serial: <filter> 
                  Device-2: M2 size: 1024 MiB info: double-bank speed: N/A type: DDR 
                  detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A 
                  part-no: Not Specified serial: <filter> 
                PCI Slots:
                  Message: No PCI Slot data found. 
                CPU:
                  Info: Single Core model: Intel Pentium M socket: U1 bits: 32 type: MCP 
                  arch: M Dothan family: 6 model-id: D (13) stepping: 8 microcode: 20 cache: 
                  L1: 32 KiB L2: 2 MiB bogomips: 3457 
                  Speed: 800 MHz min/max: 800/1733 MHz base/boost: 1733/500 volts: 3.3 V 
                  Core speed (MHz): 1: 800 
                  Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce 
                  mmx msr mtrr nx pae pbe pge pse pti sep ss sse sse2 tm tm2 tsc vme 
                  Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported 
                  Type: l1tf mitigation: PTE Inversion 
                  Type: mds 
                  status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
                  Type: meltdown mitigation: PTI 
                  Type: mmio_stale_data status: Not affected 
                  Type: retbleed status: Not affected 
                  Type: spec_store_bypass status: Vulnerable 
                  Type: spectre_v1 
                  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
                  Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, 
                  PBRSB-eIBRS: Not affected 
                  Type: srbds status: Not affected 
                  Type: tsx_async_abort status: Not affected 
                Graphics:
                  Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: N/A 
                  alternate: nvidiafb, nouveau bus-ID: 01:00.0 chip-ID: 10de:0148 
                  class-ID: 0300 
                  Display: server: X.org 1.20.11 driver: loaded: nouveau tty: 80x25 
                  Message: Advanced graphics data unavailable in console for root. 
                Audio:
                  Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio 
                  vendor: Rioworks driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 
                  chip-ID: 8086:2668 class-ID: 0403 
                  Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder 
                  vendor: Animation driver: saa7134 v: 0, 2, 17 bus-ID: 06:03.0 
                  chip-ID: 1131:7133 class-ID: 0480 
                  Sound Server-1: ALSA v: k5.10.137-antix.1-686-smp-pae running: yes 
                Network:
                  Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks 
                  driver: sky2 v: 1.30 port: 2000 bus-ID: 02:00.0 chip-ID: 11ab:4351 
                  class-ID: 0200 
                  IF: eth0 state: down mac: <filter> 
                  Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 
                  v: 1.2.2kmprq modules: wl port: 2000 bus-ID: 06:08.0 chip-ID: 8086:4220 
                  class-ID: 0280 
                  IF: eth1 state: up mac: <filter> 
                  IP v4: <filter> scope: global broadcast: <filter> 
                  IP v6: <filter> scope: link 
                  WAN IP: <filter> 
                Bluetooth:
                  Message: No bluetooth data found. 
                Logical:
                  Message: No logical block device data found. 
                RAID:
                  Message: No RAID data found. 
                Drives:
                  Local Storage: total: 151.75 GiB used: 97.23 GiB (64.1%) 
                  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A 
                  family: Momentus 5400.2 size: 93.16 GiB block-size: physical: 512 B 
                  logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 3.02 
                  temp: 51 C scheme: MBR 
                  SMART: yes state: enabled health: PASSED on: 7y 259d 22h cycles: 9859 
                  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk 
                  size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD 
                  serial: <filter> rev: 8.01 scheme: MBR 
                  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
                  Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B 
                  dev-links: cdrom,cdrw,dvd,dvdrw 
                  Features: speed: 24 multisession: yes audio: yes dvd: yes 
                  rw: cd-r,cd-rw,dvd-r state: running 
                Partition:
                  ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) 
                  used: 29.79 GiB (51.8%) fs: ext4 block-size: 4096 B dev: /dev/sdb1 
                  maj-min: 8:17 label: antiX-Live-usb 
                  uuid: 862f493d-6951-444f-a3f6-734244b241e7 
                  ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) 
                  used: 5.4 MiB (11.1%) fs: vfat block-size: 512 B dev: /dev/sdb2 
                  maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 
                  ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) 
                  used: 30.32 GiB (72.8%) fs: ext3 block-size: 4096 B dev: /dev/sda7 
                  maj-min: 8:7 label: /daten3 uuid: c1bc867a-ec28-436d-831b-e47f334471ce 
                  ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) 
                  used: 2.03 GiB (70.1%) fs: ext3 block-size: 4096 B dev: /dev/sda8 
                  maj-min: 8:8 label: /daten4 uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da 
                  ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) 
                  used: 16.92 GiB (86.7%) fs: ext3 block-size: 4096 B dev: /dev/sda5 
                  maj-min: 8:5 label: /home uuid: 94021be3-c160-4166-a151-92ad72b26f9a 
                  ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) 
                  used: 7.95 GiB (81.6%) fs: ext4 block-size: 4096 B dev: /dev/sda6 
                  maj-min: 8:6 label: antiX uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec 
                  ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) 
                  used: 4.3 GiB (55.2%) fs: ext4 block-size: 4096 B dev: /dev/sda1 
                  maj-min: 8:1 label: antiX-Frugal 
                  uuid: 19eaea0e-493b-4007-8eff-f14aca40363f 
                  ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) 
                  used: 5.93 GiB (81.7%) fs: ext4 block-size: 4096 B dev: /dev/sda10 
                  maj-min: 8:10 label: N/A uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d 
                Swap:
                  Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) 
                  ID-1: swap-1 type: partition size: 2.16 GiB used: 0 KiB (0.0%) 
                  priority: -2 dev: /dev/sda9 maj-min: 8:9 label: N/A 
                  uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 
                Unmounted:
                  ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
                USB:
                  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 
                  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
                  Device-1: 1-3:3 info: Alcor Micro Flash Drive type: Mass Storage 
                  driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA 
                  chip-ID: 058f:6387 class-ID: 0806 serial: <filter> 
                  Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 
                  speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 
                  Device-1: 2-1:2 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard 
                  driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s 
                  power: 100mA chip-ID: 093a:2533 class-ID: 0300 
                  Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 
                  speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 
                  Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 
                  speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 
                Sensors:
                  Message: No sensor data found. Is lm-sensors configured? 
                Repos:
                  Packages: apt: 1833 lib: 879 
                  Active apt repos in: /etc/apt/sources.list.d/antix.list 
                  1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye main nosystemd nonfree
                  Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 
                  1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free
                  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
                  1: deb http://ftp.de.debian.org/debian/ bullseye-updates main contrib non-free
                  Active apt repos in: /etc/apt/sources.list.d/debian.list 
                  1: deb http://ftp.de.debian.org/debian/ bullseye main contrib non-free
                  2: deb http://security.debian.org/ bullseye-security main contrib non-free
                  No active apt repos in: /etc/apt/sources.list.d/various.list 
                Processes:
                  CPU top: 5 of 100 
                  1: cpu: 8.0% command: sudo pid: 3958 mem: 4.54 MiB (0.2%) 
                  2: cpu: 0.6% command: init pid: 1 mem: 2.00 MiB (0.0%) 
                  3: cpu: 0.3% command: udevd pid: 2338 mem: 3.46 MiB (0.1%) 
                  4: cpu: 0.2% command: login pid: 3827 mem: 3.67 MiB (0.1%) 
                  5: cpu: 0.1% command: [usb-storage] pid: 502 mem: 0.00 MiB (0.0%) 
                  Memory top: 5 of 100 
                  1: mem: 6.54 MiB (0.3%) command: wpa_supplicant pid: 3704 cpu: 0.0% 
                  2: mem: 5.98 MiB (0.2%) command: cupsd pid: 3356 cpu: 0.0% 
                  3: mem: 4.54 MiB (0.2%) command: sudo pid: 3958 cpu: 8.0% 
                  4: mem: 4.36 MiB (0.2%) command: -bash pid: 3848 cpu: 0.0% 
                  5: mem: 4.05 MiB (0.2%) command: connmand pid: 3694 cpu: 0.0% 
                Info:
                  Processes: 100 Uptime: 3m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 
                  default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) 
                  v: 5.1.4 running-in: tty 1 inxi: 3.3.06 
                

                (from lspci –vnn)

                01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV43M [GeForce Go 6600] [10de:0148] (rev a2) (prog-if 00 [VGA controller])
                	Subsystem: Rioworks NV43M [GeForce Go 6600] [161f:203d]
                	Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0
                	Memory at a0000000 (32-bit, non-prefetchable) 
                	Memory at c0000000 (64-bit, prefetchable) 
                	Memory at 90000000 (64-bit, non-prefetchable) 
                	Expansion ROM at 000c0000 [virtual] [disabled] 
                	Capabilities: [60] Power Management version 2
                	Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
                	Capabilities: [78] Express Endpoint, MSI 00
                	Capabilities: [100] Virtual Channel
                	Capabilities: [128] Power Budgeting <?>
                	Kernel modules: nvidiafb, nouveau

                (initrd.log)

                Run custom code before reading boot codes: /live/custom/antiX/0.sh
                Translate to de
                Schrift aufLat15-VGA16 setzen
                setfont /live/locale/fonts/Lat15-VGA16.psf -C /dev/console
                Neue Bildschirmbreite 80
                === initrd bootstrap ==================================================
                initrd init started at 0.23 seconds
                Willkommen bei antiX 21 (Grup Yorum) 32-bit pae!
                  BusyBox v1.31.1 (2021-02-03 15:54:12 MST) multi-call binary.
                  ntfs-3g 2017.3.23AR.3 integrated FUSE 28
                           initrd version: 8.30.14-x08
                             initrd built: Fri, 04 Jun 2021 11:43:21 +0000
                             Total Memory:  2009 M
                              Used Memory:    38 M
                             Linux kernel: 5.10.137-antix.1-686-smp-pae
                             Screen width: 80
                              Kernel arch: i686
                                 Hardware: Notebook RIM2000
                Augenblickliche Bootparameter:
                     lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all xorg=nouveau
                overlay gefunden
                Lade Hardware spezifische Module ...
                Prüfe usb,cd Geräte. Suche nach boot Datei(en) antiX/linuxfs
                Herausgefilterte Geräte  /dev/sr0
                Versuch wiederholen für 15 Sekunden .
                Neue(s) Gerät(e) /dev/sdb2 /dev/sdb1 /dev/sdb /dev/sr0 gefunden
                mount -t vfat -o umask=000,dmask=002,fmask=113,shortname=winnt,uid=1000,gid=1000 /dev/sdb2 /live/boot-dev
                mount -t ext4 -o ro,noatime /dev/sdb1 /live/boot-dev
                Eingehängtes boot Gerät. Gerät /dev/sdb1 eingehängt auf /live/boot-dev
                boot Gerät Dateisystem: ext4
                boot device model: Flash Disk
                Spent 1.63 seconds looking for boot file(s) antiX/linuxfs
                loop times: 0.25
                boot device uuid: 862f493d-6951-444f-a3f6-734244b241e7
                BOOT_MP:    /live/boot-dev
                SQFILE_DEV: /dev/sdb1
                SQFILE_MP   /live/boot-dev
                Starte Generator für Zufallsnummern...
                Speichere zufälligen seed
                Mount file /live/boot-dev/antiX/linuxfs at /live/linux
                mount -t squashfs -o loop,ro /live/boot-dev/antiX/linuxfs /live/linux
                sqfs_vid: ==== f87b998e0830a50354e045cda4145991
                LD_PATH: /live/linux/lib:/live/linux/lib/i386-linux-gnu:/live/linux/usr/lib
                Loaded 13 module(s)
                nls_utf8 nls_cp437 uas usb_storage hid_generic uhci_hcd firewire_ohci firewire_core dm_crypt dm_mod overlay battery fotg210_hcd
                precheck filesystem on /dev/sdb1
                Erstellen aufs ram tmpfs bei /live/aufs-ram       (1576 MB)
                /bin/mount -t tmpfs -o size=1576m,noatime tmpfs /live/aufs-ram
                Mount overlayfs at /live/aufs
                mount -t overlay overlay -o lowerdir=/live/linux,upperdir=/live/aufs-ram/upper,workdir=/live/aufs-ram/work /live/aufs
                Load microcode
                Found one video display device
                Erstellen   /media tmpfs bei /live/aufs/media     (10 MB)
                /bin/mount -t tmpfs -o size=10m,noatime tmpfs /live/aufs/media
                Erstellen     /run tmpfs bei /live/aufs/run       (1111 MB)
                /bin/mount -t tmpfs -o size=1111m,mode=755,nodev,noatime tmpfs /live/aufs/run
                Erstellen    /live tmpfs bei /live/aufs/live      (100 MB)
                /bin/mount -t tmpfs -o size=100m,mode=755,noatime tmpfs /live/aufs/live
                Run custom code before: /live/custom/antiX/0.sh
                mount --move /live/aufs-ram /live/aufs/live/aufs-ram
                mount --move /live/boot-dev /live/aufs/live/boot-dev
                mount --move /live/linux /live/aufs/live/linux
                Run custom code after: /live/custom/antiX/0.sh
                Run custom code before running live init.d scripts: /live/custom/antiX/8.sh
                Das initrd init Programm brauchte 16.81 Sekunden
                ======================================================================

                Windows is like a submarine. Open a window and serious problems will start.

                #91708
                Member
                Robin

                  (live-init.log)

                  Fri Oct 28 05:26:47 CEST 2022  /live/etc/init.d/live-usb-save
                  live-usb-save: Restore state information
                    Restore machine specific state file /etc/udev/rules.d/70-persistent-net.rules
                    Restore machine specific state file /var/lib/connman/wifi_0012f006fa18_574b3233_managed_psk/settings
                    Restore general state file /etc/fstab.mount
                    Restore general state file /var/log/live/persist-save.log
                  Fri Oct 28 05:26:47 CEST 2022  /live/etc/init.d/live-L10n
                  live-L10n: Lokalisierung der Konsole und Zeitzone
                    Einstellung der Zeitzone und der Ortszeit auf Europe/Berlin
                    Einstellung des Gebietsschema auf de_DE.UTF-8
                  Fri Oct 28 05:26:48 CEST 2022  /live/etc/init.d/live-init
                  live-init: Lokalisierung/Konfiguration X-Window
                    Microcode laden
                    Alle Geräte werden gemountet
                    make-fstab: Remove all dynamic entries from /etc/fstab
                    make-fstab: Create new /etc/fstab
                    make-fstab: Automount /dev/sda1 at /media/antiX-Frugal
                    make-fstab: Automount /dev/sda5 at /media/_home
                    make-fstab: Automount /dev/sda6 at /media/antiX
                    make-fstab: Automount /dev/sda7 at /media/_daten3
                    make-fstab: Automount /dev/sda8 at /media/_daten4
                    make-fstab: Automount /dev/sda10 at /media/sda10
                    make-fstab: Automount /dev/sdb2 at /media/ANTIX-UEFI
                    make-fstab: Put 9 hard drive entries into /etc/fstab
                    make-fstab: Put 1 removable entry into /etc/fstab
                    Repository-Lokalisierung auf Europe/Berlin
                    Menü-Lokalisierung auf /live/etc/init.d/live-init in /etc/skel
                    Einstellung xkb-layout auf de,us
                    Einstellung xkb-model auf pc105
                    Einstellung xkb-variant auf 
                    Einstellung xkb-options auf grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll
                    CONSOLE KEYMAP: /etc/default/keyboard
                    Nach Hardware-spezifischen Video-Module wird gescannt...
                    KMS Video-Modul(e) gefunden nouveau
                    Datei /etc/X11/xorg.conf wird mit nouveau konfiguriert
                    Standardbenutzer demo gefunden
                  Fri Oct 28 05:26:57 CEST 2022  /live/etc/init.d/live-disable-services
                  live-disable-services: Customizing services
                    Disabling some services (L, lean)
                    Disabling more services (X, Xtralean)

                  (slimski.log)

                  envlang received as: de_DE
                  slimski: waiting for X server to begin accepting connections
                  Giving up.
                  slimski: unable to connect to X server
                  

                  Hope this helps to trace down and find out what’s going on. I believe the line
                  Message: Advanced graphics data unavailable in console for root.
                  from inxi output could give some hint. If even inxi cant’t see the needed info, there is something missing obviously.

                  Regards
                  Robin

                  Attachments:

                  Windows is like a submarine. Open a window and serious problems will start.

                  #91709
                  Forum Admin
                  anticapitalista

                    @Robin – thanks for the feedback.

                    Do the Debian 5.10 kernels you tried give “a perfecly stable, fast and fluid noveau” like the 5.19 one?

                    Note to self – this applies to the 686 pae kernel not 64 bit one.

                    Philosophers have interpreted the world in many ways; the point is to change it.

                    antiX with runit - leaner and meaner.

                    #91712
                    Member
                    Robin

                      From my impression with the 5.19 kernel it runs more agile than with the 5.10 kernels, but the difference is not very striking or distinctive. I haven’t seen any issues with the debian default 5.10 kernels. Meanwhile I’ve done a dist upgrade this evening to antiX 22 to this notebook which couldn’t have run even on antiX 21 until now due to nouveau driver failed and no nvidia proprietary 304.137 was installable. Will have to check some details (like suspend/resume etc.), but now everything works fine, fast and fluid as I’ve last seen in antiX 17 on this notebook, even when I had force installed the 304.137 to antiX 19 it didn’t run that smooth than before in 17 since parts of xorg had to be hold back from update for this. Now this lightheartedness is back on this notebook in antiX 22.

                      Great work, anticapitalista, many thanks for making all this possible! I’ll switch soon from antiX 19 to antiX 22 for everyday work, using for now the default debian kernel 5.19 from the backports.

                      Windows is like a submarine. Open a window and serious problems will start.

                      #93706
                      Member
                      ModdIt

                        Yesterday with fresh and fully updated antiX 22 Bullseye Live stick, init runit.
                        Fails to boot on 5x (modern) kernel with a green blank screen on one occasion with message usb hub detected.

                        Installed the antiX experimental kernel, same failure mode.

                        Legacy kernel boots and works fine. Debian 18 and 19 kernels working without issue.

                        Presently running on debian Kernel: 5.18.0-4-amd64 x86_64 Up: 2h 26m
                        CPU: quad core Intel Core i5-2500K (-MCP-) speed/min/max: 2345/1600/3700 MHz

                        No further time to experiment at present.
                        Will try to run a series 6 kernel sometime soon.

                      Viewing 10 posts - 76 through 85 (of 85 total)
                      • You must be logged in to reply to this topic.