- This topic has 84 replies, 13 voices, and was last updated Nov 22-11:30 am by ModdIt.
-
Posts
-
olsztyn
Particularly (in my testing) kernel 5.10.142, which appears to have the smallest memory footprint and best memory management. Calciumsodium did not see any memory footprint gains running sysvinit but with my systems as runit I definitely see better memory footprint vs. 5.10.104 by about 10Mb. I am very particular about memory footprint and it is noticeable. Perhaps some optimizations have taken place…
To supplement my previous observation, comparing antiX kernel 5.10.142 (configured by anticapitalista), which was vs. other versions of kernel 5.10.xxx:
Unexpected to me another observation is that kernel 5.10.142 appears to be attributed for equal (or even slightly lower by 1-3 Mb) initial memory footprint of antiX 21 runit (*elogind*-free) than stock kernel 4.9, as provided in antiX 21. This is quite a surprise to me…
If anticapitalista (or Debian) has done some significant optimization, then it is a significant accomplishment. If someone knows what has been done I would appreciate some info…
My testing has been done on Thinkpad T410 laptops from 2010: i5, 4Gb, Nouveau driver on nVidia NVS3100. I will check on some other laptops as well…- This reply was modified 7 months, 2 weeks ago by olsztyn.
Live antiX Boot Options (Previously posted by Xecure):
https://antixlinuxfan.miraheze.org/wiki/Table_of_antiX_Boot_Parameters
Brian Masinick
@olsztyn: I’m really happy to hear that antiX kernel 5.10.142 has worked so well for you. I did have some success with it too on my Dell Inspiron 5558 laptop, though I was also battling with unexplained boot issues with both the 137 and 142 instances on that system, whereas the 4.9, 4.19 and Liquorix kernels all worked with out any “tweaks” necessary.
The thing we can take away from all of this is thankfulness that we have so many choices that allow us to run these systems.
The irony of it all is that to get the laptop I’m using now working, I had to manually copy multiple things from elsewhere: 1) the kernel image, 2) the kernel headers, 3) the modules, and 4) the kernel firmware, plus I had to pull in an extra wireless firmware file from another system, but thanks to multi-booting, I was able to copy and hack all of these things and I’m running here today on a system that requires a 5.16 or newer kernel – my HP 14-fq1025nr laptop. I’m about to update my status information on that very system in my information thread, which I keep for historical and test data information, plus FYI for anyone with similar hardware.
--
Brian MasinickRobin
I had promised to test your 5.10.142 kernel on this 32 bit notebook. So here I’m with the results. The kernel boots very fast, but it wouldn’t start X, asking for console login instead. Here are the logs and dmesg output (attached) I’ve saved immediately after startup. Maybe you can make something of it.
(inxi -zv8)
System: Kernel: 5.10.142-antix.2-686-smp-pae i686 bits: 32 compiler: gcc v: 10.2.1 parameters: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all Desktop: IceWM 2.9.4 vt: 7 dm: N/A Distro: antiX-21_386-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: <filter> Chassis: No Enclosure type: 1 serial: <filter> Mobo: Notebook model: RIM2000 serial: <filter> BIOS: Phoenix v: RIM00F0A date: 05/27/2005 Battery: ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) volts: 16.6 min: 14.8 model: ARIMA LI4403A type: Unknown serial: <filter> status: Full Memory: RAM: total: 1.96 GiB used: 858.2 MiB (42.7%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Info: Single Core model: Intel Pentium M bits: 32 type: MCP arch: M Dothan family: 6 model-id: D (13) stepping: 8 microcode: 20 cache: L2: 2 MiB bogomips: 3457 Speed: 800 MHz min/max: 800/1733 MHz Core speed (MHz): 1: 800 Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae pbe pge pse pti sep ss sse sse2 tm tm2 tsc vme Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported Type: l1tf mitigation: PTE Inversion Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled Type: meltdown mitigation: PTI Type: mmio_stale_data status: Unknown: No mitigations Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: N/A alternate: nvidiafb, nouveau bus-ID: 01:00.0 chip-ID: 10de:0148 class-ID: 0300 Display: x11 server: X.Org 1.20.11 driver: loaded: nouveau,vesa unloaded: fbdev,modesetting alternate: nv display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 271x203mm (10.7x8.0") s-diag: 339mm (13.3") Monitor-1: default res: 1024x768 OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1 direct render: Yes Audio: Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403 Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation driver: saa7134 v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480 Sound Server-1: ALSA v: k5.10.142-antix.2-686-smp-pae running: yes Network: Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 port: 2000 bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq modules: wl port: 2000 bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280 IF: eth1 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 151.75 GiB used: 85.38 GiB (56.3%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A size: 93.16 GiB block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 3.02 scheme: MBR ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 8.01 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) used: 13.6 GiB (23.6%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb uuid: 862f493d-6951-444f-a3f6-734244b241e7 ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 5.4 MiB (11.1%) fs: vfat dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) used: 34.65 GiB (83.2%) fs: ext3 dev: /dev/sda7 maj-min: 8:7 label: /daten3 uuid: c1bc867a-ec28-436d-831b-e47f334471ce ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) fs: ext3 dev: /dev/sda8 maj-min: 8:8 label: /daten4 uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) fs: ext3 dev: /dev/sda5 maj-min: 8:5 label: /home uuid: 94021be3-c160-4166-a151-92ad72b26f9a ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 7.95 GiB (81.6%) fs: ext4 dev: /dev/sda6 maj-min: 8:6 label: antiX uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 4.3 GiB (55.2%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal uuid: 19eaea0e-493b-4007-8eff-f14aca40363f ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) fs: ext4 dev: /dev/sda10 maj-min: 8:10 label: N/A uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 2.16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda9 maj-min: 8:9 label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: <superuser required> label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 serial: <filter> Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 2-1:2 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 093a:2533 class-ID: 0300 Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Sensors: Message: No sensor data found. Is lm-sensors configured? Repos: Packages: apt: 1819 lib: 879 Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http: //ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http: //ftp.de.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http: //ftp.de.debian.org/debian/ bullseye main contrib non-free 2: deb http: //security.debian.org/ bullseye-security main contrib non-free No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 of 130 1: cpu: 31.4% command: firefox-esr pid: 6428 mem: 159.9 MiB (7.9%) 2: cpu: 24.0% command: firefox-esr pid: 6235 mem: 363.9 MiB (18.1%) 3: cpu: 13.0% command: yad pid: 7556 mem: 24.1 MiB (1.2%) 4: cpu: 4.7% command: xorg pid: 3738 mem: 71.5 MiB (3.5%) 5: cpu: 4.7% command: gtkdialog pid: 7523 mem: 23.8 MiB (1.1%) Memory top: 5 of 130 1: mem: 363.9 MiB (18.1%) command: firefox-esr pid: 6235 cpu: 24.0% 2: mem: 159.9 MiB (7.9%) command: firefox-esr pid: 6428 cpu: 31.4% 3: mem: 115.4 MiB (5.7%) command: firefox-esr pid: 6374 cpu: 1.3% 4: mem: 77.9 MiB (3.8%) command: firefox-esr pid: 6313 cpu: 0.1% 5: mem: 71.5 MiB (3.5%) command: xorg pid: 3738 cpu: 4.7% Info: Processes: 130 Uptime: 18m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06(initrd.log)
Run custom code before reading boot codes: /live/custom/antiX/0.sh Translate to de Schrift aufLat15-VGA16 setzen setfont /live/locale/fonts/Lat15-VGA16.psf -C /dev/console Neue Bildschirmbreite 80 @ 1.59 starting tsplash === initrd bootstrap ================================================== initrd init started at 0.23 seconds Willkommen bei antiX 21 (Grup Yorum) 32-bit pae! BusyBox v1.31.1 (2021-02-03 15:54:12 MST) multi-call binary. ntfs-3g 2017.3.23AR.3 integrated FUSE 28 initrd version: 8.30.14-x08 initrd built: Fri, 04 Jun 2021 11:43:21 +0000 Total Memory: 2009 M Used Memory: 37 M Linux kernel: 5.10.142-antix.2-686-smp-pae Screen width: 80 Kernel arch: i686 Hardware: Notebook RIM2000 Augenblickliche Bootparameter: lang=de_DE tz=Europe/Berlin quiet splasht disable=lxF mount=all xorg=nouveau overlay gefunden Lade Hardware spezifische Module ... Prüfe usb,cd Geräte. Suche nach boot Datei(en) antiX/linuxfs Herausgefilterte Geräte /dev/sr0 Versuch wiederholen für 15 Sekunden . Neue(s) Gerät(e) /dev/sdb2 /dev/sdb1 /dev/sdb /dev/sr0 gefunden mount -t vfat -o umask=000,dmask=002,fmask=113,shortname=winnt,uid=1000,gid=1000 /dev/sdb2 /live/boot-dev mount -t ext4 -o ro,noatime /dev/sdb1 /live/boot-dev Eingehängtes boot Gerät. Gerät /dev/sdb1 eingehängt auf /live/boot-dev boot Gerät Dateisystem: ext4 boot device model: Flash Disk Spent 1.63 seconds looking for boot file(s) antiX/linuxfs loop times: 0.25 boot device uuid: 862f493d-6951-444f-a3f6-734244b241e7 BOOT_MP: /live/boot-dev SQFILE_DEV: /dev/sdb1 SQFILE_MP /live/boot-dev Starte Generator für Zufallsnummern... Speichere zufälligen seed Mount file /live/boot-dev/antiX/linuxfs at /live/linux mount -t squashfs -o loop,ro /live/boot-dev/antiX/linuxfs /live/linux sqfs_vid: ==== a246bdfb23d4f341469b4de1b42f134d LD_PATH: /live/linux/lib:/live/linux/lib/i386-linux-gnu:/live/linux/usr/lib Loaded 13 module(s) nls_utf8 nls_cp437 uas usb_storage hid_generic uhci_hcd firewire_ohci firewire_core dm_crypt dm_mod overlay battery fotg210_hcd precheck filesystem on /dev/sdb1 Erstellen aufs ram tmpfs bei /live/aufs-ram (1577 MB) /bin/mount -t tmpfs -o size=1577m,noatime tmpfs /live/aufs-ram Mount overlayfs at /live/aufs mount -t overlay overlay -o lowerdir=/live/linux,upperdir=/live/aufs-ram/upper,workdir=/live/aufs-ram/work /live/aufs Load microcode Found one video display device Erstellen /media tmpfs bei /live/aufs/media (10 MB) /bin/mount -t tmpfs -o size=10m,noatime tmpfs /live/aufs/media Erstellen /run tmpfs bei /live/aufs/run (1111 MB) /bin/mount -t tmpfs -o size=1111m,mode=755,nodev,noatime tmpfs /live/aufs/run Erstellen /live tmpfs bei /live/aufs/live (100 MB) /bin/mount -t tmpfs -o size=100m,mode=755,noatime tmpfs /live/aufs/live Run custom code before: /live/custom/antiX/0.sh mount --move /live/aufs-ram /live/aufs/live/aufs-ram mount --move /live/boot-dev /live/aufs/live/boot-dev mount --move /live/linux /live/aufs/live/linux Run custom code after: /live/custom/antiX/0.sh Run custom code before running live init.d scripts: /live/custom/antiX/8.sh Das initrd init Programm brauchte 16.41 Sekunden ====================================================================== cp /live/config/tsplash/progress /live/aufs/live/config/tsplash/progress cp /live/config/tsplash/tsplash.log /live/aufs/live/config/tsplash/tsplash.log(live-init.log)
Thu Oct 27 07:18:26 CEST 2022 /live/etc/init.d/live-usb-save live-usb-save: Restore state information Restore machine specific state file /etc/udev/rules.d/70-persistent-net.rules Restore machine specific state file /var/lib/connman/wifi_0012f006fa18_574b3233_managed_psk/settings Restore general state file /etc/fstab.mount Restore general state file /var/log/live/persist-save.log Thu Oct 27 07:18:26 CEST 2022 /live/etc/init.d/live-L10n live-L10n: Lokalisierung der Konsole und Zeitzone Einstellung der Zeitzone und der Ortszeit auf Europe/Berlin Einstellung des Gebietsschema auf de_DE.UTF-8 Thu Oct 27 07:18:27 CEST 2022 /live/etc/init.d/live-init live-init: Lokalisierung/Konfiguration X-Window Microcode laden Alle Geräte werden gemountet make-fstab: Remove all dynamic entries from /etc/fstab make-fstab: Create new /etc/fstab make-fstab: Automount /dev/sda1 at /media/antiX-Frugal make-fstab: Automount /dev/sda5 at /media/_home make-fstab: Automount /dev/sda6 at /media/antiX make-fstab: Automount /dev/sda7 at /media/_daten3 make-fstab: Automount /dev/sda8 at /media/_daten4 make-fstab: Automount /dev/sda10 at /media/sda10 make-fstab: Automount /dev/sdb2 at /media/ANTIX-UEFI make-fstab: Put 9 hard drive entries into /etc/fstab make-fstab: Put 1 removable entry into /etc/fstab Repository-Lokalisierung auf Europe/Berlin Menü-Lokalisierung auf /live/etc/init.d/live-init in /etc/skel Einstellung xkb-layout auf de,us Einstellung xkb-model auf pc105 Einstellung xkb-variant auf Einstellung xkb-options auf grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll CONSOLE KEYMAP: /etc/default/keyboard Nach Hardware-spezifischen Video-Module wird gescannt... KMS Video-Modul(e) gefunden nouveau Datei /etc/X11/xorg.conf wird mit nouveau konfiguriert Standardbenutzer demo gefunden Thu Oct 27 07:18:35 CEST 2022 /live/etc/init.d/live-disable-services live-disable-services: Customizing services Disabling some services (L, lean) Disabling more services (X, Xtralean)(Xorg.0.log))
[ 32.991] X.Org X Server 1.20.11 X Protocol Version 11, Revision 0 [ 32.991] Build Operating System: linux Debian [ 32.991] Current Operating System: Linux antix1 5.10.142-antix.2-686-smp-pae #1 SMP Sat Sep 10 19:09:21 EEST 2022 i686 [ 32.991] Kernel command line: lang=de_DE tz=Europe/Berlin quiet splasht disable=lxF mount=all xorg=nouveau [ 32.991] Build Date: 10 November 2021 11:00:13AM [ 32.991] xorg-server 2:1.20.11-1.0nosystemd1 (https://www.debian.org/support) [ 32.991] Current version of pixman: 0.40.0 [ 32.991] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 32.991] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 32.994] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 07:18:55 2022 [ 33.004] (==) Using config file: "/etc/X11/xorg.conf" [ 33.004] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 33.004] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 33.019] (==) No Layout section. Using the first Screen section. [ 33.019] (==) No screen section available. Using defaults. [ 33.019] (**) |-->Screen "Default Screen Section" (0) [ 33.019] (**) | |-->Monitor "<default monitor>" [ 33.022] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 33.022] (**) | |-->Device "Device0" [ 33.022] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 33.022] (==) Automatically adding devices [ 33.022] (==) Automatically enabling devices [ 33.022] (==) Automatically adding GPU devices [ 33.022] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 33.042] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 33.042] Entry deleted from font path. [ 33.044] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 33.044] Entry deleted from font path. [ 33.044] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 33.044] Entry deleted from font path. [ 33.044] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 33.044] (==) ModulePath set to "/usr/lib/xorg/modules" [ 33.044] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 33.044] (II) Loader magic: 0x70a700 [ 33.044] (II) Module ABI versions: [ 33.044] X.Org ANSI C Emulation: 0.4 [ 33.044] X.Org Video Driver: 24.1 [ 33.044] X.Org XInput driver : 24.1 [ 33.044] X.Org Server Extension : 10.0 [ 33.098] (--) PCI:*(1@0:0:0) 10de:0148:161f:203d rev 162, Mem @ 0xa0000000/67108864, 0xc0000000/134217728, 0x90000000/16777216, BIOS @ 0x????????/131072 [ 33.098] (II) LoadModule: "glx" [ 33.131] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 33.243] (II) Module glx: vendor="X.Org Foundation" [ 33.243] compiled for 1.20.11, module version = 1.0.0 [ 33.243] ABI class: X.Org Server Extension, version 10.0 [ 33.243] (II) LoadModule: "nouveau" [ 33.248] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 33.285] (II) Module nouveau: vendor="X.Org Foundation" [ 33.285] compiled for 1.20.10, module version = 1.0.17 [ 33.285] Module class: X.Org Video Driver [ 33.285] ABI class: X.Org Video Driver, version 24.1 [ 33.285] (II) NOUVEAU driver Date: Sat Jan 23 12:24:42 2021 -0500 [ 33.285] (II) NOUVEAU driver for NVIDIA chipset families : [ 33.285] RIVA TNT (NV04) [ 33.285] RIVA TNT2 (NV05) [ 33.285] GeForce 256 (NV10) [ 33.285] GeForce 2 (NV11, NV15) [ 33.285] GeForce 4MX (NV17, NV18) [ 33.285] GeForce 3 (NV20) [ 33.285] GeForce 4Ti (NV25, NV28) [ 33.288] GeForce FX (NV3x) [ 33.288] GeForce 6 (NV4x) [ 33.288] GeForce 7 (G7x) [ 33.289] GeForce 8 (G8x) [ 33.289] GeForce 9 (G9x) [ 33.289] GeForce GTX 2xx/3xx (GT2xx) [ 33.289] GeForce GTX 4xx/5xx (GFxxx) [ 33.289] GeForce GTX 6xx/7xx (GKxxx) [ 33.289] GeForce GTX 9xx (GMxxx) [ 33.289] GeForce GTX 10xx (GPxxx) [ 33.289] (++) using VT number 7 [ 33.445] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -19 [ 33.446] (EE) No devices detected. [ 33.446] (EE) Fatal server error: [ 33.446] (EE) no screens found(EE) [ 33.446] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 33.446] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 33.446] (EE) [ 33.448] (EE) Server terminated with error (1). Closing log file.(slimski.log)
envlang received as: de_DE slimski: waiting for X server to begin accepting connections Giving up. slimski: unable to connect to X serverSo I’m back to 4.9.0-326-antix.1-686-smp-pae, which works great in antiX 21 test USB-stick, and for everyday usage I’m still on antiX 19 using 4.19.0-256-antix.1-686-smp-pae with old nvidia proprietary drivers, allowing way better graphics performance on this device than nouveau still.
Regards
RobinWindows is like a submarine. Open a window and serious problems will start.
Just for comparison, I’ve installed latest debian default kernel on antiX 21, since I’ve read while searching for a solution for this nouveau issue in 5.10 kernel from above, that these issues should vanish in 5.15 kernel magically. In the repos doesn’t seem to exist any 5.15 kernel, so I installed latest available default debian kernel from the backport repos:
linux-image-5.19.0-0.deb11.2-686-pae: Installiert: 5.19.11-1~bpo11+1 Installationskandidat: 5.19.11-1~bpo11+1 Versionstabelle: *** 5.19.11-1~bpo11+1 100 100 http://deb.debian.org/debian bullseye-backports/main i386 Packages 100 /var/lib/dpkg/statusAnd what should I say, actually the issue from the 5.10 kernel is fixed, it boots antiX straight up to desktop. It even uses nouveau driver on a speed and clean view I’ve never seen from nouveau ever before here. This comes very near already to the proprietary nvidia drivers. Will need to get some further stress testing, but it looks promising, really. For now it seems to run absolutely stable. Maybe I can get rid of the proprietary nvidia stuff in near future and switch to 5.x kernel series for everyday work… I’m writing these lines from this very system right now. It’s amazing! Here the details:
(inxi -zv8)
System: Kernel: 5.19.0-0.deb11.2-686-pae i686 bits: 32 compiler: gcc v: 10.2.1 parameters: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all Desktop: IceWM 2.9.4 dm: N/A Distro: antiX-21_386-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: N/A Chassis: No Enclosure type: 1 serial: N/A Mobo: Notebook model: RIM2000 serial: N/A BIOS: Phoenix v: RIM00F0A date: 05/27/2005 Battery: ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) volts: 16.6 min: 14.8 model: ARIMA LI4403A type: Unknown serial: <filter> status: Full Memory: RAM: total: 1.96 GiB used: 368.5 MiB (18.3%) Array-1: capacity: 3 GiB note: check slots: 2 EC: None max-module-size: 1024 MiB note: est. voltage: 3.3 Device-1: M1 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> Device-2: M2 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> PCI Slots: Message: No PCI Slot data found. CPU: Info: Single Core model: Intel Pentium M socket: U1 bits: 32 type: MCP arch: M Dothan family: 6 model-id: D (13) stepping: 8 microcode: 20 cache: L1: 32 KiB L2: 2 MiB bogomips: 3457 Speed: 800 MHz min/max: 800/1733 MHz base/boost: 1733/500 volts: 3.3 V Core speed (MHz): 1: 800 Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae pbe pge pse pti sep ss sse sse2 tm tm2 tsc vme Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported Type: l1tf mitigation: PTE Inversion Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled Type: meltdown mitigation: PTI Type: mmio_stale_data status: Unknown: No mitigations Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: nouveau v: kernel bus-ID: 01:00.0 chip-ID: 10de:0148 class-ID: 0300 Display: server: X.Org 1.20.11 driver: loaded: nouveau unloaded: fbdev,modesetting,vesa alternate: nv display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 380x238mm (15.0x9.4") s-diag: 448mm (17.7") Monitor-1: LVDS-1 res: 1440x900 hz: 60 dpi: 100 size: 367x230mm (14.4x9.1") diag: 433mm (17.1") OpenGL: renderer: NV43 v: 2.1 Mesa 20.3.5 direct render: Yes Audio: Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403 Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation driver: saa7134 v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480 Sound Server-1: ALSA v: k5.19.0-0.deb11.2-686-pae running: yes Network: Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 port: 2000 bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq port: 2000 bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280 IF: eth1 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 151.75 GiB used: 91.46 GiB (60.3%) ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A family: Momentus 5400.2 size: 93.16 GiB block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 3.02 temp: 51 C scheme: MBR SMART: yes state: enabled health: PASSED on: 7y 259d 4h cycles: 9857 ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 8.01 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) used: 19.68 GiB (34.2%) fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb uuid: 862f493d-6951-444f-a3f6-734244b241e7 ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 5.4 MiB (11.1%) fs: vfat block-size: 512 B dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) used: 34.65 GiB (83.2%) fs: ext3 block-size: 4096 B dev: /dev/sda7 maj-min: 8:7 label: /daten3 uuid: c1bc867a-ec28-436d-831b-e47f334471ce ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) fs: ext3 block-size: 4096 B dev: /dev/sda8 maj-min: 8:8 label: /daten4 uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) fs: ext3 block-size: 4096 B dev: /dev/sda5 maj-min: 8:5 label: /home uuid: 94021be3-c160-4166-a151-92ad72b26f9a ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 7.95 GiB (81.6%) fs: ext4 block-size: 4096 B dev: /dev/sda6 maj-min: 8:6 label: antiX uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 4.3 GiB (55.2%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal uuid: 19eaea0e-493b-4007-8eff-f14aca40363f ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) fs: ext4 block-size: 4096 B dev: /dev/sda10 maj-min: 8:10 label: N/A uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 2.16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda9 maj-min: 8:9 label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 1-1:2 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 093a:2533 class-ID: 0300 Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 4-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 serial: <filter> Sensors: System Temperatures: cpu: 66.4 C mobo: 56.0 C Fan Speeds (RPM): N/A Repos: Packages: apt: 1824 lib: 879 Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.de.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.de.debian.org/debian/ bullseye main contrib non-free 2: deb http://security.debian.org/ bullseye-security main contrib non-free No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 of 124 1: cpu: 7.0% command: sudo pid: 6517 mem: 4.56 MiB (0.2%) 2: cpu: 4.0% command: zzzfm pid: 5928 mem: 34.3 MiB (1.7%) 3: cpu: 3.1% command: xorg pid: 3998 mem: 50.7 MiB (2.5%) 4: cpu: 1.2% command: gtkdialog pid: 6233 mem: 24.2 MiB (1.2%) 5: cpu: 0.8% command: conky pid: 4420 mem: 8.95 MiB (0.4%) Memory top: 5 of 124 1: mem: 50.7 MiB (2.5%) command: xorg pid: 3998 cpu: 3.1% 2: mem: 34.3 MiB (1.7%) command: zzzfm pid: 5928 cpu: 4.0% 3: mem: 31.6 MiB (1.5%) command: cmst pid: 4403 cpu: 0.0% 4: mem: 28.1 MiB (1.3%) command: roxterm pid: 4844 cpu: 0.8% 5: mem: 24.2 MiB (1.2%) command: gtkdialog pid: 6233 cpu: 1.2% Info: Processes: 124 Uptime: 11m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: roxterm inxi: 3.3.06(initrd.log)
Run custom code before reading boot codes: /live/custom/antiX/0.sh Translate to de Schrift aufLat15-VGA16 setzen setfont /live/locale/fonts/Lat15-VGA16.psf -C /dev/console Neue Bildschirmbreite 80 === initrd bootstrap ================================================== initrd init started at 0.36 seconds Coldplug loop pid: 131 Willkommen bei antiX 21 (Grup Yorum) 32-bit pae! BusyBox v1.31.1 (2021-02-03 15:54:12 MST) multi-call binary. ntfs-3g 2017.3.23AR.3 integrated FUSE 28 initrd version: 8.30.14-x08 initrd built: Fri, 04 Jun 2021 11:43:21 +0000 Total Memory: 2010 M Used Memory: 60 M Linux kernel: 5.19.0-0.deb11.2-686-pae Screen width: 80 Kernel arch: i686 Hardware: Notebook RIM2000 Augenblickliche Bootparameter: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all overlay gefunden Lade Hardware spezifische Module ... Prüfe usb,cd Geräte. Suche nach boot Datei(en) antiX/linuxfs Herausgefilterte Geräte /dev/sr0 Versuch wiederholen für 15 Sekunden ... Neue(s) Gerät(e) /dev/sdb2 /dev/sdb1 /dev/sdb /dev/sr0 gefunden mount -t vfat -o umask=000,dmask=002,fmask=113,shortname=winnt,uid=1000,gid=1000 /dev/sdb2 /live/boot-dev mount -t ext4 -o ro,noatime /dev/sdb1 /live/boot-dev Eingehängtes boot Gerät. Gerät /dev/sdb1 eingehängt auf /live/boot-dev boot Gerät Dateisystem: ext4 boot device model: Flash Disk Spent 2.81 seconds looking for boot file(s) antiX/linuxfs loop times: 0.37 0.44 0.40 boot device uuid: 862f493d-6951-444f-a3f6-734244b241e7 BOOT_MP: /live/boot-dev SQFILE_DEV: /dev/sdb1 SQFILE_MP /live/boot-dev Starte Generator für Zufallsnummern... Speichere zufälligen seed Mount file /live/boot-dev/antiX/linuxfs at /live/linux mount -t squashfs -o loop,ro /live/boot-dev/antiX/linuxfs /live/linux sqfs_vid: ==== 8f7f5d0737879da9f09b8c3ad7b69283 LD_PATH: /live/linux/lib:/live/linux/lib/i386-linux-gnu:/live/linux/usr/lib Loaded 50 module(s) squashfs loop ext4 jbd2 mbcache crc16 nls_ascii vfat fat nls_cp437 uas usb_storage hid_generic usbhid hid sr_mod cdrom sd_mod t10_pi crct10dif_generic crc_t10dif crct10dif_common crc64_rocksoft crc64 ehci_pci uhci_hcd ata_generic ahci libahci ata_piix libata scsi_mod scsi_common sdhci_pci sdhci cqhci firewire_ohci firewire_core crc_itu_t dm_crypt dm_mod dax mmc_block mmc_core crc32c_generic overlay battery ehci_hcd usbcore usb_common precheck filesystem on /dev/sdb1 Erstellen aufs ram tmpfs bei /live/aufs-ram (1560 MB) /bin/mount -t tmpfs -o size=1560m,noatime tmpfs /live/aufs-ram Mount overlayfs at /live/aufs mount -t overlay overlay -o lowerdir=/live/linux,upperdir=/live/aufs-ram/upper,workdir=/live/aufs-ram/work /live/aufs Found one video display device kill coldplug loop pid: 131 Erstellen /media tmpfs bei /live/aufs/media (10 MB) /bin/mount -t tmpfs -o size=10m,noatime tmpfs /live/aufs/media Erstellen /run tmpfs bei /live/aufs/run (1111 MB) /bin/mount -t tmpfs -o size=1111m,mode=755,nodev,noatime tmpfs /live/aufs/run Erstellen /live tmpfs bei /live/aufs/live (100 MB) /bin/mount -t tmpfs -o size=100m,mode=755,noatime tmpfs /live/aufs/live Run custom code before: /live/custom/antiX/0.sh mount --move /live/aufs-ram /live/aufs/live/aufs-ram mount --move /live/boot-dev /live/aufs/live/boot-dev mount --move /live/linux /live/aufs/live/linux Run custom code after: /live/custom/antiX/0.sh Coldplug loop pid: 1198 Run custom code before running live init.d scripts: /live/custom/antiX/8.sh kill coldplug loop pid: 1198 Das initrd init Programm brauchte 23.30 Sekunden ======================================================================(live-init.log)
Thu Oct 27 10:44:53 CEST 2022 /live/etc/init.d/live-usb-save live-usb-save: Restore state information Restore machine specific state file /etc/udev/rules.d/70-persistent-net.rules Restore machine specific state file /var/lib/connman/wifi_0012f006fa18_574b3233_managed_psk/settings Restore general state file /etc/fstab.mount Restore general state file /var/log/live/persist-save.log Thu Oct 27 10:44:53 CEST 2022 /live/etc/init.d/live-L10n live-L10n: Lokalisierung der Konsole und Zeitzone Einstellung der Zeitzone und der Ortszeit auf Europe/Berlin Einstellung des Gebietsschema auf de_DE.UTF-8 Thu Oct 27 10:44:54 CEST 2022 /live/etc/init.d/live-init live-init: Lokalisierung/Konfiguration X-Window Alle Geräte werden gemountet make-fstab: Remove all dynamic entries from /etc/fstab make-fstab: Create new /etc/fstab make-fstab: Automount /dev/sda1 at /media/antiX-Frugal make-fstab: Automount /dev/sda5 at /media/_home make-fstab: Automount /dev/sda6 at /media/antiX make-fstab: Automount /dev/sda7 at /media/_daten3 make-fstab: Automount /dev/sda8 at /media/_daten4 make-fstab: Automount /dev/sda10 at /media/sda10 make-fstab: Automount /dev/sdb2 at /media/ANTIX-UEFI make-fstab: Put 9 hard drive entries into /etc/fstab make-fstab: Put 1 removable entry into /etc/fstab Repository-Lokalisierung auf Europe/Berlin Menü-Lokalisierung auf /live/etc/init.d/live-init in /etc/skel Einstellung xkb-layout auf de,us Einstellung xkb-model auf pc105 Einstellung xkb-variant auf Einstellung xkb-options auf grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll CONSOLE KEYMAP: /etc/default/keyboard Nach Hardware-spezifischen Video-Module wird gescannt... KMS Video-Modul(e) gefunden drm_display_helper drm_ttm_helper nouveau Standardbenutzer demo gefunden Thu Oct 27 10:45:03 CEST 2022 /live/etc/init.d/live-disable-services live-disable-services: Customizing services Disabling some services (L, lean) Disabling more services (X, Xtralean)(Xorg.0.log)
[ 52.484] X.Org X Server 1.20.11 X Protocol Version 11, Revision 0 [ 52.484] Build Operating System: linux Debian [ 52.484] Current Operating System: Linux antix1 5.19.0-0.deb11.2-686-pae #1 SMP PREEMPT_DYNAMIC Debian 5.19.11-1~bpo11+1 (2022-10-03) i686 [ 52.484] Kernel command line: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all [ 52.484] Build Date: 10 November 2021 11:00:13AM [ 52.484] xorg-server 2:1.20.11-1.0nosystemd1 (https://www.debian.org/support) [ 52.484] Current version of pixman: 0.40.0 [ 52.484] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 52.484] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 52.484] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 10:45:35 2022 [ 52.498] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 52.498] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 52.506] (==) No Layout section. Using the first Screen section. [ 52.506] (==) No screen section available. Using defaults. [ 52.506] (**) |-->Screen "Default Screen Section" (0) [ 52.506] (**) | |-->Monitor "<default monitor>" [ 52.507] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 52.507] (==) Automatically adding devices [ 52.507] (==) Automatically enabling devices [ 52.507] (==) Automatically adding GPU devices [ 52.507] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 52.529] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 52.529] Entry deleted from font path. [ 52.531] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 52.531] Entry deleted from font path. [ 52.531] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 52.531] Entry deleted from font path. [ 52.531] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 52.531] (==) ModulePath set to "/usr/lib/xorg/modules" [ 52.532] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 52.532] (II) Loader magic: 0x731700 [ 52.532] (II) Module ABI versions: [ 52.532] X.Org ANSI C Emulation: 0.4 [ 52.532] X.Org Video Driver: 24.1 [ 52.532] X.Org XInput driver : 24.1 [ 52.532] X.Org Server Extension : 10.0 [ 52.532] (II) xfree86: Adding drm device (/dev/dri/card0) [ 52.561] (--) PCI:*(1@0:0:0) 10de:0148:161f:203d rev 162, Mem @ 0xa0000000/67108864, 0xc0000000/134217728, 0x90000000/16777216, BIOS @ 0x????????/131072 [ 52.561] (II) LoadModule: "glx" [ 52.572] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 52.676] (II) Module glx: vendor="X.Org Foundation" [ 52.676] compiled for 1.20.11, module version = 1.0.0 [ 52.676] ABI class: X.Org Server Extension, version 10.0 [ 52.937] (==) Matched nouveau as autoconfigured driver 0 [ 52.937] (==) Matched nv as autoconfigured driver 1 [ 52.937] (==) Matched modesetting as autoconfigured driver 2 [ 52.937] (==) Matched fbdev as autoconfigured driver 3 [ 52.937] (==) Matched vesa as autoconfigured driver 4 [ 52.937] (==) Assigned the driver to the xf86ConfigLayout [ 52.937] (II) LoadModule: "nouveau" [ 52.938] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 52.979] (II) Module nouveau: vendor="X.Org Foundation" [ 52.979] compiled for 1.20.10, module version = 1.0.17 [ 52.979] Module class: X.Org Video Driver [ 52.979] ABI class: X.Org Video Driver, version 24.1 [ 52.979] (II) LoadModule: "nv" [ 52.981] (WW) Warning, couldn't open module nv [ 52.981] (EE) Failed to load module "nv" (module does not exist, 0) [ 52.981] (II) LoadModule: "modesetting" [ 52.981] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 52.995] (II) Module modesetting: vendor="X.Org Foundation" [ 52.996] compiled for 1.20.11, module version = 1.20.11 [ 52.996] Module class: X.Org Video Driver [ 52.996] ABI class: X.Org Video Driver, version 24.1 [ 52.996] (II) LoadModule: "fbdev" [ 52.997] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 53.011] (II) Module fbdev: vendor="X.Org Foundation" [ 53.011] compiled for 1.20.0, module version = 0.5.0 [ 53.011] Module class: X.Org Video Driver [ 53.011] ABI class: X.Org Video Driver, version 24.0 [ 53.011] (II) LoadModule: "vesa" [ 53.011] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 53.019] (II) Module vesa: vendor="X.Org Foundation" [ 53.019] compiled for 1.20.9, module version = 2.5.0 [ 53.019] Module class: X.Org Video Driver [ 53.019] ABI class: X.Org Video Driver, version 24.1 [ 53.019] (II) NOUVEAU driver Date: Sat Jan 23 12:24:42 2021 -0500 [ 53.019] (II) NOUVEAU driver for NVIDIA chipset families : [ 53.019] RIVA TNT (NV04) [ 53.019] RIVA TNT2 (NV05) [ 53.019] GeForce 256 (NV10) [ 53.020] GeForce 2 (NV11, NV15) [ 53.020] GeForce 4MX (NV17, NV18) [ 53.020] GeForce 3 (NV20) [ 53.020] GeForce 4Ti (NV25, NV28) [ 53.020] GeForce FX (NV3x) [ 53.020] GeForce 6 (NV4x) [ 53.020] GeForce 7 (G7x) [ 53.020] GeForce 8 (G8x) [ 53.020] GeForce 9 (G9x) [ 53.020] GeForce GTX 2xx/3xx (GT2xx) [ 53.020] GeForce GTX 4xx/5xx (GFxxx) [ 53.020] GeForce GTX 6xx/7xx (GKxxx) [ 53.020] GeForce GTX 9xx (GMxxx) [ 53.021] GeForce GTX 10xx (GPxxx) [ 53.021] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 53.021] (II) FBDEV: driver for framebuffer: fbdev [ 53.021] (II) VESA: driver for VESA chipsets: vesa [ 53.021] (++) using VT number 7 [ 53.029] (II) [drm] nouveau interface version: 1.3.1 [ 53.029] (WW) Falling back to old probe method for modesetting [ 53.029] (WW) Falling back to old probe method for fbdev [ 53.029] (II) Loading sub module "fbdevhw" [ 53.030] (II) LoadModule: "fbdevhw" [ 53.030] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 53.045] (II) Module fbdevhw: vendor="X.Org Foundation" [ 53.045] compiled for 1.20.11, module version = 0.0.2 [ 53.045] ABI class: X.Org Video Driver, version 24.1 [ 53.045] (II) Loading sub module "dri2" [ 53.045] (II) LoadModule: "dri2" [ 53.045] (II) Module "dri2" already built-in [ 53.045] (--) NOUVEAU(0): Chipset: "NVIDIA NV43" [ 53.045] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 53.045] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 53.045] (==) NOUVEAU(0): RGB weight 888 [ 53.045] (==) NOUVEAU(0): Default visual is TrueColor [ 53.045] (==) NOUVEAU(0): Using HW cursor [ 53.045] (==) NOUVEAU(0): Allowed maximum DRI level 2. [ 53.045] (==) NOUVEAU(0): GLX sync to VBlank enabled. [ 53.045] (==) NOUVEAU(0): Page flipping enabled [ 53.045] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2] [ 53.045] (==) NOUVEAU(0): Page flipping synced to vblank by kernel. [ 53.045] (II) NOUVEAU(0): Initializing outputs ... [ 53.083] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 53.173] (II) NOUVEAU(0): Output LVDS-1 has no monitor section [ 53.239] (II) NOUVEAU(0): Output TV-1 has no monitor section [ 53.239] (II) NOUVEAU(0): 3 crtcs needed for screen. [ 53.239] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen. [ 53.239] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen. [ 53.283] (II) NOUVEAU(0): EDID for output VGA-1 [ 53.344] (II) NOUVEAU(0): EDID for output LVDS-1 [ 53.344] (II) NOUVEAU(0): Manufacturer: SEC Model: 3847 Serial#: 0 [ 53.344] (II) NOUVEAU(0): Year: 2006 Week: 0 [ 53.344] (II) NOUVEAU(0): EDID Version: 1.3 [ 53.344] (II) NOUVEAU(0): Digital Display Input [ 53.344] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23 [ 53.344] (II) NOUVEAU(0): Gamma: 2.20 [ 53.344] (II) NOUVEAU(0): No DPMS capabilities specified [ 53.344] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 53.344] (II) NOUVEAU(0): First detailed timing is preferred mode [ 53.344] (II) NOUVEAU(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 [ 53.344] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 [ 53.344] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 53.344] (II) NOUVEAU(0): Supported detailed timing: [ 53.344] (II) NOUVEAU(0): clock: 96.3 MHz Image Size: 367 x 230 mm [ 53.344] (II) NOUVEAU(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0 [ 53.344] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0 [ 53.344] (II) NOUVEAU(0): Unknown vendor-specific block f [ 53.344] (II) NOUVEAU(0): SAMSUNG [ 53.344] (II) NOUVEAU(0): LTN170X2-L02 [ 53.344] (II) NOUVEAU(0): EDID (in hex): [ 53.344] (II) NOUVEAU(0): 00ffffffffffff004ca3473800000000 [ 53.344] (II) NOUVEAU(0): 00100103802517780a87f594574f8c27 [ 53.344] (II) NOUVEAU(0): 27505400000001010101010101010101 [ 53.344] (II) NOUVEAU(0): 0101010101019f25a04051840c304020 [ 53.344] (II) NOUVEAU(0): 33006fe6100000190000000f00000000 [ 53.344] (II) NOUVEAU(0): 000000000078e6022300000000fe0053 [ 53.344] (II) NOUVEAU(0): 414d53554e470a2020202020000000fe [ 53.344] (II) NOUVEAU(0): 004c544e31373058322d4c30320a00f1 [ 53.344] (II) NOUVEAU(0): Printing probed modes for output LVDS-1 [ 53.344] (II) NOUVEAU(0): Modeline "1440x900"x60.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz eP) [ 53.344] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.77 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.53 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "800x600"x60.0 38.31 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "640x480"x59.9 23.98 640 664 720 800 480 483 487 500 -hsync +vsync (30.0 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "720x400"x60.0 22.41 720 744 808 896 400 403 413 417 -hsync +vsync (25.0 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz) [ 53.344] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.52 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz) [ 53.411] (II) NOUVEAU(0): EDID for output TV-1 [ 53.411] (II) NOUVEAU(0): Output VGA-1 disconnected [ 53.411] (II) NOUVEAU(0): Output LVDS-1 connected [ 53.411] (II) NOUVEAU(0): Output TV-1 disconnected [ 53.411] (II) NOUVEAU(0): Using exact sizes for initial modes [ 53.411] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1440x900 +0+0 [ 53.411] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0) [ 53.411] (II) NOUVEAU(0): Virtual size is 1440x900 (pitch 0) [ 53.411] (**) NOUVEAU(0): Driver mode "1440x900": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz [ 53.411] (II) NOUVEAU(0): Modeline "1440x900"x60.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz eP) [ 53.411] (**) NOUVEAU(0): Mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz [ 53.411] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.77 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz) [ 53.411] (**) NOUVEAU(0): Mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz [ 53.411] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.53 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 53.411] (**) NOUVEAU(0): Mode "800x600": 38.3 MHz (scaled from 0.0 MHz), 37.4 kHz, 60.0 Hz [ 53.411] (II) NOUVEAU(0): Modeline "800x600"x60.0 38.31 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 53.411] (**) NOUVEAU(0): Mode "640x480": 24.0 MHz (scaled from 0.0 MHz), 30.0 kHz, 59.9 Hz [ 53.411] (II) NOUVEAU(0): Modeline "640x480"x59.9 23.98 640 664 720 800 480 483 487 500 -hsync +vsync (30.0 kHz) [ 53.412] (**) NOUVEAU(0): Mode "720x400": 22.4 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz [ 53.412] (II) NOUVEAU(0): Modeline "720x400"x60.0 22.41 720 744 808 896 400 403 413 417 -hsync +vsync (25.0 kHz) [ 53.412] (**) NOUVEAU(0): Mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz [ 53.412] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz) [ 53.412] (**) NOUVEAU(0): Mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz [ 53.412] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.52 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz) [ 53.412] (==) NOUVEAU(0): DPI set to (96, 96) [ 53.412] (II) Loading sub module "fb" [ 53.412] (II) LoadModule: "fb" [ 53.412] (II) Loading /usr/lib/xorg/modules/libfb.so [ 53.414] (II) Module fb: vendor="X.Org Foundation" [ 53.414] compiled for 1.20.11, module version = 1.0.0 [ 53.414] ABI class: X.Org ANSI C Emulation, version 0.4 [ 53.414] (II) Loading sub module "shadowfb" [ 53.414] (II) LoadModule: "shadowfb" [ 53.415] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 53.419] (II) Module shadowfb: vendor="X.Org Foundation" [ 53.419] compiled for 1.20.11, module version = 1.0.0 [ 53.419] ABI class: X.Org ANSI C Emulation, version 0.4 [ 53.419] (II) UnloadModule: "modesetting" [ 53.419] (II) Unloading modesetting [ 53.419] (II) UnloadModule: "fbdev" [ 53.419] (II) Unloading fbdev [ 53.419] (II) UnloadSubModule: "fbdevhw" [ 53.419] (II) Unloading fbdevhw [ 53.419] (II) UnloadModule: "vesa" [ 53.419] (II) Unloading vesa [ 53.428] (II) NOUVEAU(0): Channel setup complete. [ 53.446] (II) NOUVEAU(0): Hardware support for Present enabled [ 53.446] (II) NOUVEAU(0): [DRI2] Setup complete [ 53.446] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 53.446] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau [ 53.446] (II) Loading sub module "exa" [ 53.446] (II) LoadModule: "exa" [ 53.446] (II) Loading /usr/lib/xorg/modules/libexa.so [ 53.447] (II) Module exa: vendor="X.Org Foundation" [ 53.447] compiled for 1.20.11, module version = 2.6.0 [ 53.447] ABI class: X.Org Video Driver, version 24.1 [ 53.447] (II) EXA(0): Driver allocated offscreen pixmaps [ 53.447] (II) EXA(0): Driver registered support for the following operations: [ 53.447] (II) Solid [ 53.447] (II) Copy [ 53.447] (II) Composite (RENDER acceleration) [ 53.447] (II) UploadToScreen [ 53.447] (II) DownloadFromScreen [ 53.447] (==) NOUVEAU(0): Backing store enabled [ 53.447] (==) NOUVEAU(0): Silken mouse enabled [ 53.447] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter. [ 53.447] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 53.447] (==) NOUVEAU(0): DPMS enabled [ 53.448] (II) Initializing extension Generic Event Extension [ 53.450] (II) Initializing extension SHAPE [ 53.451] (II) Initializing extension MIT-SHM [ 53.452] (II) Initializing extension XInputExtension [ 53.453] (II) Initializing extension XTEST [ 53.454] (II) Initializing extension BIG-REQUESTS [ 53.454] (II) Initializing extension SYNC [ 53.455] (II) Initializing extension XKEYBOARD [ 53.459] (II) Initializing extension XC-MISC [ 53.460] (II) Initializing extension SECURITY [ 53.460] (II) Initializing extension XFIXES [ 53.461] (II) Initializing extension RENDER [ 53.461] (II) Initializing extension RANDR [ 53.462] (II) Initializing extension COMPOSITE [ 53.463] (II) Initializing extension DAMAGE [ 53.466] (II) Initializing extension MIT-SCREEN-SAVER [ 53.466] (II) Initializing extension DOUBLE-BUFFER [ 53.467] (II) Initializing extension RECORD [ 53.467] (II) Initializing extension DPMS [ 53.468] (II) Initializing extension Present [ 53.468] (II) Initializing extension DRI3 [ 53.468] (II) Initializing extension X-Resource [ 53.469] (II) Initializing extension XVideo [ 53.469] (II) Initializing extension XVideo-MotionCompensation [ 53.470] (II) Initializing extension SELinux [ 53.470] (II) SELinux: Disabled on system [ 53.470] (II) Initializing extension GLX [ 54.873] (II) AIGLX: Loaded and initialized nouveau [ 54.873] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 54.873] (II) Initializing extension XFree86-VidModeExtension [ 54.874] (II) Initializing extension XFree86-DGA [ 54.875] (II) Initializing extension XFree86-DRI [ 54.875] (II) Initializing extension DRI2 [ 54.879] (II) NOUVEAU(0): NVEnterVT is called. [ 54.880] (II) NOUVEAU(0): Setting screen physical size to 380 x 238 [ 54.880] resize called 1440 900 [ 55.086] (II) config/udev: Adding input device Power Button (/dev/input/event6) [ 55.086] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 55.086] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 55.086] (II) LoadModule: "libinput" [ 55.087] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 55.124] (II) Module libinput: vendor="X.Org Foundation" [ 55.124] compiled for 1.20.8, module version = 0.30.0 [ 55.124] Module class: X.Org XInput Driver [ 55.124] ABI class: X.Org XInput driver, version 24.1 [ 55.124] (II) Using input driver 'libinput' for 'Power Button' [ 55.124] (**) Power Button: always reports core events [ 55.124] (**) Option "Device" "/dev/input/event6" [ 55.125] (**) Option "_source" "server/udev" [ 55.163] (II) event6 - Power Button: is tagged by udev as: Keyboard [ 55.164] (II) event6 - Power Button: device is a keyboard [ 55.164] (II) event6 - Power Button: device removed [ 55.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event6" [ 55.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 55.165] (**) Option "xkb_model" "pc105" [ 55.165] (**) Option "xkb_layout" "de,us" [ 55.165] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 55.241] (II) event6 - Power Button: is tagged by udev as: Keyboard [ 55.242] (II) event6 - Power Button: device is a keyboard [ 55.244] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 55.244] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 55.244] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 55.244] (II) Using input driver 'libinput' for 'Video Bus' [ 55.244] (**) Video Bus: always reports core events [ 55.244] (**) Option "Device" "/dev/input/event7" [ 55.244] (**) Option "_source" "server/udev" [ 55.248] (II) event7 - Video Bus: is tagged by udev as: Keyboard [ 55.248] (II) event7 - Video Bus: device is a keyboard [ 55.249] (II) event7 - Video Bus: device removed [ 55.249] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event7" [ 55.249] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 55.249] (**) Option "xkb_model" "pc105" [ 55.249] (**) Option "xkb_layout" "de,us" [ 55.249] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 55.253] (II) event7 - Video Bus: is tagged by udev as: Keyboard [ 55.254] (II) event7 - Video Bus: device is a keyboard [ 55.255] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 55.256] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 55.256] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 55.256] (II) Using input driver 'libinput' for 'Video Bus' [ 55.256] (**) Video Bus: always reports core events [ 55.256] (**) Option "Device" "/dev/input/event4" [ 55.256] (**) Option "_source" "server/udev" [ 55.260] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 55.260] (II) event4 - Video Bus: device is a keyboard [ 55.260] (II) event4 - Video Bus: device removed [ 55.260] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event4" [ 55.261] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 55.261] (**) Option "xkb_model" "pc105" [ 55.261] (**) Option "xkb_layout" "de,us" [ 55.261] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 55.266] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 55.266] (II) event4 - Video Bus: device is a keyboard [ 55.268] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 55.268] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 55.268] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 55.268] (II) Using input driver 'libinput' for 'Power Button' [ 55.268] (**) Power Button: always reports core events [ 55.268] (**) Option "Device" "/dev/input/event5" [ 55.268] (**) Option "_source" "server/udev" [ 55.271] (II) event5 - Power Button: is tagged by udev as: Keyboard [ 55.272] (II) event5 - Power Button: device is a keyboard [ 55.272] (II) event5 - Power Button: device removed [ 55.272] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event5" [ 55.272] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 55.272] (**) Option "xkb_model" "pc105" [ 55.272] (**) Option "xkb_layout" "de,us" [ 55.272] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 55.277] (II) event5 - Power Button: is tagged by udev as: Keyboard [ 55.277] (II) event5 - Power Button: device is a keyboard [ 55.279] (II) config/udev: Adding input device Lid Switch (/dev/input/event3) [ 55.279] (II) No input driver specified, ignoring this device. [ 55.279] (II) This device may have been added with another device file. [ 55.281] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8) [ 55.281] (II) No input driver specified, ignoring this device. [ 55.281] (II) This device may have been added with another device file. [ 55.282] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event9) [ 55.282] (II) No input driver specified, ignoring this device. [ 55.282] (II) This device may have been added with another device file. [ 55.283] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event10) [ 55.283] (II) No input driver specified, ignoring this device. [ 55.283] (II) This device may have been added with another device file. [ 55.284] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event11) [ 55.284] (II) No input driver specified, ignoring this device. [ 55.285] (II) This device may have been added with another device file. [ 55.286] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event12) [ 55.286] (II) No input driver specified, ignoring this device. [ 55.286] (II) This device may have been added with another device file. [ 55.287] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event13) [ 55.287] (II) No input driver specified, ignoring this device. [ 55.287] (II) This device may have been added with another device file. [ 55.288] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event14) [ 55.288] (II) No input driver specified, ignoring this device. [ 55.288] (II) This device may have been added with another device file. [ 55.289] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event15) [ 55.289] (II) No input driver specified, ignoring this device. [ 55.289] (II) This device may have been added with another device file. [ 55.291] (II) config/udev: Adding input device Gaming Mouse (/dev/input/event1) [ 55.291] (**) Gaming Mouse: Applying InputClass "evdev pointer catchall" [ 55.291] (**) Gaming Mouse: Applying InputClass "libinput pointer catchall" [ 55.291] (II) Using input driver 'libinput' for 'Gaming Mouse' [ 55.291] (**) Gaming Mouse: always reports core events [ 55.291] (**) Option "Device" "/dev/input/event1" [ 55.291] (**) Option "_source" "server/udev" [ 55.355] (II) event1 - Gaming Mouse: is tagged by udev as: Mouse [ 55.355] (II) event1 - Gaming Mouse: device is a pointer [ 55.356] (II) event1 - Gaming Mouse: device removed [ 55.358] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:093A:2533.0001/input/input2/event1" [ 55.358] (II) XINPUT: Adding extended input device "Gaming Mouse" (type: MOUSE, id 10) [ 55.359] (**) Option "AccelerationScheme" "none" [ 55.359] (**) Gaming Mouse: (accel) selected scheme none/0 [ 55.359] (**) Gaming Mouse: (accel) acceleration factor: 2.000 [ 55.359] (**) Gaming Mouse: (accel) acceleration threshold: 4 [ 55.423] (II) event1 - Gaming Mouse: is tagged by udev as: Mouse [ 55.423] (II) event1 - Gaming Mouse: device is a pointer [ 55.425] (II) config/udev: Adding input device Gaming Mouse (/dev/input/mouse0) [ 55.425] (II) No input driver specified, ignoring this device. [ 55.425] (II) This device may have been added with another device file. [ 55.427] (II) config/udev: Adding input device Gaming Mouse Keyboard (/dev/input/event2) [ 55.427] (**) Gaming Mouse Keyboard: Applying InputClass "evdev keyboard catchall" [ 55.427] (**) Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall" [ 55.427] (II) Using input driver 'libinput' for 'Gaming Mouse Keyboard' [ 55.428] (**) Gaming Mouse Keyboard: always reports core events [ 55.428] (**) Option "Device" "/dev/input/event2" [ 55.428] (**) Option "_source" "server/udev" [ 55.432] (II) event2 - Gaming Mouse Keyboard: is tagged by udev as: Keyboard [ 55.433] (II) event2 - Gaming Mouse Keyboard: device is a keyboard [ 55.433] (II) event2 - Gaming Mouse Keyboard: device removed [ 55.434] (II) libinput: Gaming Mouse Keyboard: needs a virtual subdevice [ 55.434] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:093A:2533.0002/input/input4/event2" [ 55.434] (II) XINPUT: Adding extended input device "Gaming Mouse Keyboard" (type: MOUSE, id 11) [ 55.434] (**) Option "AccelerationScheme" "none" [ 55.434] (**) Gaming Mouse Keyboard: (accel) selected scheme none/0 [ 55.434] (**) Gaming Mouse Keyboard: (accel) acceleration factor: 2.000 [ 55.434] (**) Gaming Mouse Keyboard: (accel) acceleration threshold: 4 [ 55.439] (II) event2 - Gaming Mouse Keyboard: is tagged by udev as: Keyboard [ 55.439] (II) event2 - Gaming Mouse Keyboard: device is a keyboard [ 55.441] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 55.441] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 55.441] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 55.441] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 55.441] (**) AT Translated Set 2 keyboard: always reports core events [ 55.441] (**) Option "Device" "/dev/input/event0" [ 55.442] (**) Option "_source" "server/udev" [ 55.445] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 55.445] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 55.448] (II) event0 - AT Translated Set 2 keyboard: device removed [ 55.448] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 55.448] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 55.448] (**) Option "xkb_model" "pc105" [ 55.448] (**) Option "xkb_layout" "de,us" [ 55.448] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 55.452] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 55.453] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 55.456] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16) [ 55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall" [ 55.456] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 55.457] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 55.457] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad" [ 55.457] (II) LoadModule: "synaptics" [ 55.458] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 55.461] (II) Module synaptics: vendor="X.Org Foundation" [ 55.461] compiled for 1.20.8, module version = 1.9.1 [ 55.461] Module class: X.Org XInput Driver [ 55.461] ABI class: X.Org XInput driver, version 24.1 [ 55.461] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 55.461] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 55.461] (**) Option "Device" "/dev/input/event16" [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 62) [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 113) [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right [ 55.462] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 55.462] (**) Option "VertEdgeScroll" "1" [ 55.462] (**) Option "CornerCoasting" "1" [ 55.462] (**) Option "VertTwoFingerScroll" "1" [ 55.462] (**) Option "HorizTwoFingerScroll" "1" [ 55.462] (**) Option "RBCornerButton" "9" [ 55.462] (**) Option "LBCornerButton" "8" [ 55.462] (**) Option "TapButton1" "1" [ 55.462] (**) Option "TapButton2" "2" [ 55.462] (**) Option "TapButton3" "3" [ 55.463] (**) Option "CircularScrolling" "1" [ 55.463] (**) Option "CircScrollTrigger" "7" [ 55.463] (**) Option "MinSpeed" "0.5" [ 55.463] (**) Option "MaxSpeed" "1.0" [ 55.463] (**) Option "AccelFactor" "0.075" [ 55.463] (**) Option "CoastingSpeed" "8" [ 55.463] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 55.463] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 55.463] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input18/event16" [ 55.463] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13) [ 55.463] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.0 [ 55.463] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 2.00 [ 55.464] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.075 [ 55.464] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 55.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 55.465] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 55.466] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 55.466] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 55.481] (**) Gaming Mouse Keyboard: Applying InputClass "evdev keyboard catchall" [ 55.481] (**) Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall" [ 55.481] (II) Using input driver 'libinput' for 'Gaming Mouse Keyboard' [ 55.481] (**) Gaming Mouse Keyboard: always reports core events [ 55.481] (**) Option "Device" "/dev/input/event2" [ 55.481] (**) Option "_source" "_driver/libinput" [ 55.481] (II) libinput: Gaming Mouse Keyboard: is a virtual subdevice [ 55.481] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:093A:2533.0002/input/input4/event2" [ 55.481] (II) XINPUT: Adding extended input device "Gaming Mouse Keyboard" (type: KEYBOARD, id 14) [ 55.481] (**) Option "xkb_model" "pc105" [ 55.481] (**) Option "xkb_layout" "de,us" [ 55.481] (**) Option "xkb_options" "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll" [ 60.812] (II) NOUVEAU(0): EDID vendor "SEC", prod id 14407 [ 60.812] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 60.812] (II) NOUVEAU(0): Modeline "1440x900"x0.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz eP) [ 61.020] (II) NOUVEAU(0): EDID vendor "SEC", prod id 14407 [ 61.020] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 61.020] (II) NOUVEAU(0): Modeline "1440x900"x0.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz eP)So, maybe this piece of information contains some hints how to fix the issue on 5.10 antiX kernel, or what other options exist? Would rather like to run an antiX kernel than this debian one…
Regards
RobinWindows is like a submarine. Open a window and serious problems will start.
anticapitalista
@Robin – have you tried the default 5.10 Debian kernel?
If that works, then there is something wrong with our 5.10 kernel on some hard drive.
If not, then the fault lies with the 5.10 series.Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - leaner and meaner.
hello @anticapitalista ,
have you tried the default 5.10 Debian kernel?
If that works, then there is something wrong with our 5.10 kernel on some hard drive.
If not, then the fault lies with the 5.10 series.I had not checked this before, but I’ve managed to do some testing early this morning. Here the results:
Since there was no debian kernel 5.10.142 I have tested the nearest available, one before and one after, (5.10.140-1 and 5.10.149-2 both), which come whith packages linux-image-5.10.0-18-686-pae (signed) and linux-image-5.10.0-19-686-pae (signed). As with the most recent 5.19.0-0.deb11.2-686-pae kernel from debian backports antix boots with them straight up to the desktop, no issues. The 5.19 kernel comes with a perfecly stable, fast and fluid noveau (at least when running single head this one is absoulutely equivalent to what I was used from proprietary nvidia driver stuff, but I had not time to test in a multihead setup with an additional screen or TV out by now.).
So I decided to re-check your 5.10.142-antix.2 kernel, I apt-purged it from the system first, then remastered, installed it anew from repos, using apt. But after remaster and live kernel update it fails again with the same issue, not detecting the graphics card properly. So unfortunately this was not an arbitrary faulty install. Then I gave the 5.10.137-antix.1-686-smp-pae kernel a try, same issue with this one, it stops on console login (It is possible to force them into desktop using the fb mode instead of noveau, but only blurry, flickering and lowres screen then, no way to change it to proper resolution using xrandr.) So I reinstalled the 5.19 debian again to the very stick, without changing anything else, and again it ran straight through to desktop.
While installing the 5.x kernels I noticed an additional issue, which might get addressed also (but it doesn’t keep the kernels from booting to desktop, the debian kernels suffer from it also):
$ sudo apt-get install linux-headers-5.10.142-antix.2-686-smp-pae linux-image-5.10.142-antix.2-686-smp-pae Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Die folgenden NEUEN Pakete werden installiert: linux-headers-5.10.142-antix.2-686-smp-pae linux-image-5.10.142-antix.2-686-smp-pae 0 aktualisiert, 2 neu installiert, 0 zu entfernen und 267 nicht aktualisiert. Es müssen 53,8 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 224 MB Plattenplatz zusätzlich benutzt. Holen:1 http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye/main i386 linux-headers-5.10.142-antix.2-686-smp-pae i386 5.10.142-antix.2-686-smp-pae-1 [8.007 kB] Holen:2 http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye/main i386 linux-image-5.10.142-antix.2-686-smp-pae i386 5.10.142-antix.2-686-smp-pae-1 [45,8 MB] Es wurden 53,8 MB in 44 s geholt (1.224 kB/s). Vormals nicht ausgewähltes Paket linux-headers-5.10.142-antix.2-686-smp-pae wird gewählt. (Lese Datenbank ... 288621 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../linux-headers-5.10.142-antix.2-686-smp-pae_5.10.142-antix.2-686-smp-pae-1_i386.deb ... Entpacken von linux-headers-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) ... Vormals nicht ausgewähltes Paket linux-image-5.10.142-antix.2-686-smp-pae wird gewählt. Vorbereitung zum Entpacken von .../linux-image-5.10.142-antix.2-686-smp-pae_5.10.142-antix.2-686-smp-pae-1_i386.deb ... Entpacken von linux-image-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) ... linux-image-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) wird eingerichtet ... dkms: running auto installation service for kernel 5.10.142-antix.2-686-smp-pae: Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area... make -j1 KERNELRELEASE=5.10.142-antix.2-686-smp-pae KVER=5.10.142-antix.2-686-smp-pae...... cleaning build area... DKMS: build completed. wl.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.142-antix.2-686-smp-pae/updates/dkms/ depmod.... Warning: Unable to find an initial ram disk that I know how to handle. Will not try to make an initrd. DKMS: install completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area... make -j1 KERNELRELEASE=5.10.142-antix.2-686-smp-pae -C /lib/modules/5.10.142-antix.2-686-smp-pae/build M=/var/lib/dkms/exfat/5.9/build...(bad exit status: 2) Error! Bad return status for module build on kernel: 5.10.142-antix.2-686-smp-pae (i686) Consult /var/lib/dkms/exfat/5.9/build/make.log for more information. . update-initramfs: Generating /boot/initrd.img-5.10.142-antix.2-686-smp-pae cryptsetup: ERROR: Couldn't resolve device overlay cryptsetup: WARNING: Couldn't determine root device I: The initramfs will attempt to resume from /dev/sda9 I: (UUID=2d151628-e6f1-4e23-a8a6-7820d17b8a14) I: Set the RESUME variable to override this. linux-headers-5.10.142-antix.2-686-smp-pae (5.10.142-antix.2-686-smp-pae-1) wird eingerichtet ...$ cat /var/lib/dkms/exfat/5.9/build/make.log DKMS make.log for exfat-5.9 for kernel 5.10.142-antix.2-686-smp-pae (i686) Fr 28. Okt 03:13:11 CEST 2022 make: Verzeichnis „/usr/src/linux-headers-5.10.142-antix.2-686-smp-pae“ wird betreten CC [M] /var/lib/dkms/exfat/5.9/build/inode.o In file included from /var/lib/dkms/exfat/5.9/build/exfat_fs.h:14, from /var/lib/dkms/exfat/5.9/build/inode.c:16: /var/lib/dkms/exfat/5.9/build/compat.h:12:2: error: #error "This driver doesn't support v5.8+, " "please use the included driver from your kernel" 12 | #error "This driver doesn't support v5.8+, " \ | ^~~~~ /var/lib/dkms/exfat/5.9/build/inode.c: In function ‘exfat_readpages’: /var/lib/dkms/exfat/5.9/build/inode.c:367:9: error: implicit declaration of function ‘mpage_readpages’; did you mean ‘mpage_readpage’? [-Werror=implicit-function-declaration] 367 | return mpage_readpages(mapping, pages, nr_pages, exfat_get_block); | ^~~~~~~~~~~~~~~ | mpage_readpage cc1: some warnings being treated as errors make[1]: *** [scripts/Makefile.build:286: /var/lib/dkms/exfat/5.9/build/inode.o] Fehler 1 make: *** [Makefile:1845: /var/lib/dkms/exfat/5.9/build] Fehler 2 make: Verzeichnis „/usr/src/linux-headers-5.10.142-antix.2-686-smp-pae“ wird verlassenAnd then, I noticed the .md5 chcksum files of vmlinuz, initrd and linuxfs files the are lost sometimes when remastering and/or rolling back, so there is no checksum any longer present. Couldn’t find out what triggers the loss, sometimes it happens, and sometimes the old .md5 file is perfectly backuped. But the system works still without these, and I believe they can easily get recreated manually if needed, if I’m not mistaken. Does antiX check the files against them while starting up?
Technical details:
The logs from debian 5.10.0-18 and 5.10.0-19 look exactly like the one from 5.19.0 I’ve posted above, so I don’t repost it here (in case you need them, just let me know, I’ve stored them) Here’s what I’ve got from 5.10.137-antix.1-686-smp-pae kernel:
(inxi -zv8)
System: Kernel: 5.10.137-antix.1-686-smp-pae i686 bits: 32 compiler: gcc v: 10.2.1 parameters: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all xorg=nouveau Console: tty 1 Distro: antiX-21_386-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Other-vm? System: Notebook product: RIM2000 v: N/A serial: N/A Chassis: No Enclosure type: 1 serial: N/A Mobo: Notebook model: RIM2000 serial: N/A BIOS: Phoenix v: RIM00F0A date: 05/27/2005 Battery: ID-1: BAT0 charge: 62.2 Wh (100.0%) condition: 62.2/65.1 Wh (95.5%) volts: 16.6 min: 14.8 model: ARIMA LI4403A type: Unknown serial: <filter> status: Full Memory: RAM: total: 1.96 GiB used: 288.3 MiB (14.3%) Array-1: capacity: 3 GiB note: check slots: 2 EC: None max-module-size: 1024 MiB note: est. voltage: 3.3 Device-1: M1 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> Device-2: M2 size: 1024 MiB info: double-bank speed: N/A type: DDR detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: Not Specified serial: <filter> PCI Slots: Message: No PCI Slot data found. CPU: Info: Single Core model: Intel Pentium M socket: U1 bits: 32 type: MCP arch: M Dothan family: 6 model-id: D (13) stepping: 8 microcode: 20 cache: L1: 32 KiB L2: 2 MiB bogomips: 3457 Speed: 800 MHz min/max: 800/1733 MHz base/boost: 1733/500 volts: 3.3 V Core speed (MHz): 1: 800 Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae pbe pge pse pti sep ss sse sse2 tm tm2 tsc vme Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported Type: l1tf mitigation: PTE Inversion Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled Type: meltdown mitigation: PTI Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: NVIDIA NV43M [GeForce Go 6600] vendor: Rioworks driver: N/A alternate: nvidiafb, nouveau bus-ID: 01:00.0 chip-ID: 10de:0148 class-ID: 0300 Display: server: X.org 1.20.11 driver: loaded: nouveau tty: 80x25 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Rioworks driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:2668 class-ID: 0403 Device-2: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder vendor: Animation driver: saa7134 v: 0, 2, 17 bus-ID: 06:03.0 chip-ID: 1131:7133 class-ID: 0480 Sound Server-1: ALSA v: k5.10.137-antix.1-686-smp-pae running: yes Network: Device-1: Marvell 88E8036 PCI-E Fast Ethernet vendor: Rioworks driver: sky2 v: 1.30 port: 2000 bus-ID: 02:00.0 chip-ID: 11ab:4351 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq modules: wl port: 2000 bus-ID: 06:08.0 chip-ID: 8086:4220 class-ID: 0280 IF: eth1 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 151.75 GiB used: 97.23 GiB (64.1%) ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9100823A family: Momentus 5400.2 size: 93.16 GiB block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 3.02 temp: 51 C scheme: MBR SMART: yes state: enabled health: PASSED on: 7y 259d 22h cycles: 9859 ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 8.01 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Optical-1: /dev/sr0 vendor: PBDS model: DVD+-RW DS-8W1P rev: BD1B dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running Partition: ID-1: /live/boot-dev raw-size: 58.54 GiB size: 57.54 GiB (98.29%) used: 29.79 GiB (51.8%) fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: antiX-Live-usb uuid: 862f493d-6951-444f-a3f6-734244b241e7 ID-2: /media/ANTIX-UEFI raw-size: 49 MiB size: 48.2 MiB (98.43%) used: 5.4 MiB (11.1%) fs: vfat block-size: 512 B dev: /dev/sdb2 maj-min: 8:18 label: ANTIX-UEFI uuid: 4389-57D7 ID-3: /media/_daten3 raw-size: 42.48 GiB size: 41.64 GiB (98.03%) used: 30.32 GiB (72.8%) fs: ext3 block-size: 4096 B dev: /dev/sda7 maj-min: 8:7 label: /daten3 uuid: c1bc867a-ec28-436d-831b-e47f334471ce ID-4: /media/_daten4 raw-size: 3 GiB size: 2.89 GiB (96.20%) used: 2.03 GiB (70.1%) fs: ext3 block-size: 4096 B dev: /dev/sda8 maj-min: 8:8 label: /daten4 uuid: 556a43c4-118c-4bb5-baa2-7c997faea6da ID-5: /media/_home raw-size: 20 GiB size: 19.52 GiB (97.58%) used: 16.92 GiB (86.7%) fs: ext3 block-size: 4096 B dev: /dev/sda5 maj-min: 8:5 label: /home uuid: 94021be3-c160-4166-a151-92ad72b26f9a ID-6: /media/antiX raw-size: 10 GiB size: 9.74 GiB (97.45%) used: 7.95 GiB (81.6%) fs: ext4 block-size: 4096 B dev: /dev/sda6 maj-min: 8:6 label: antiX uuid: a6852dda-0c34-4c4f-8efc-5d458cbaaeec ID-7: /media/antiX-Frugal raw-size: 8 GiB size: 7.79 GiB (97.43%) used: 4.3 GiB (55.2%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: antiX-Frugal uuid: 19eaea0e-493b-4007-8eff-f14aca40363f ID-8: /media/sda10 raw-size: 7.51 GiB size: 7.26 GiB (96.61%) used: 5.93 GiB (81.7%) fs: ext4 block-size: 4096 B dev: /dev/sda10 maj-min: 8:10 label: N/A uuid: 0eb91a9b-ea52-4f5b-9140-5a06f6f73d1d Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: partition size: 2.16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda9 maj-min: 8:9 label: N/A uuid: 2d151628-e6f1-4e23-a8a6-7820d17b8a14 Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-3:3 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 058f:6387 class-ID: 0806 serial: <filter> Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 2-1:2 info: Pixart Imaging Gaming Mouse type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 093a:2533 class-ID: 0300 Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 Sensors: Message: No sensor data found. Is lm-sensors configured? Repos: Packages: apt: 1833 lib: 879 Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/antix/bullseye bullseye main nosystemd nonfree Active apt repos in: /etc/apt/sources.list.d/bullseye-backports.list 1: deb http://deb.debian.org/debian bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.de.debian.org/debian/ bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.de.debian.org/debian/ bullseye main contrib non-free 2: deb http://security.debian.org/ bullseye-security main contrib non-free No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 of 100 1: cpu: 8.0% command: sudo pid: 3958 mem: 4.54 MiB (0.2%) 2: cpu: 0.6% command: init pid: 1 mem: 2.00 MiB (0.0%) 3: cpu: 0.3% command: udevd pid: 2338 mem: 3.46 MiB (0.1%) 4: cpu: 0.2% command: login pid: 3827 mem: 3.67 MiB (0.1%) 5: cpu: 0.1% command: [usb-storage] pid: 502 mem: 0.00 MiB (0.0%) Memory top: 5 of 100 1: mem: 6.54 MiB (0.3%) command: wpa_supplicant pid: 3704 cpu: 0.0% 2: mem: 5.98 MiB (0.2%) command: cupsd pid: 3356 cpu: 0.0% 3: mem: 4.54 MiB (0.2%) command: sudo pid: 3958 cpu: 8.0% 4: mem: 4.36 MiB (0.2%) command: -bash pid: 3848 cpu: 0.0% 5: mem: 4.05 MiB (0.2%) command: connmand pid: 3694 cpu: 0.0% Info: Processes: 100 Uptime: 3m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: service Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: tty 1 inxi: 3.3.06(from lspci –vnn)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV43M [GeForce Go 6600] [10de:0148] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Rioworks NV43M [GeForce Go 6600] [161f:203d] Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0 Memory at a0000000 (32-bit, non-prefetchable) Memory at c0000000 (64-bit, prefetchable) Memory at 90000000 (64-bit, non-prefetchable) Expansion ROM at 000c0000 [virtual] [disabled] Capabilities: [60] Power Management version 2 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Kernel modules: nvidiafb, nouveau(initrd.log)
Run custom code before reading boot codes: /live/custom/antiX/0.sh Translate to de Schrift aufLat15-VGA16 setzen setfont /live/locale/fonts/Lat15-VGA16.psf -C /dev/console Neue Bildschirmbreite 80 === initrd bootstrap ================================================== initrd init started at 0.23 seconds Willkommen bei antiX 21 (Grup Yorum) 32-bit pae! BusyBox v1.31.1 (2021-02-03 15:54:12 MST) multi-call binary. ntfs-3g 2017.3.23AR.3 integrated FUSE 28 initrd version: 8.30.14-x08 initrd built: Fri, 04 Jun 2021 11:43:21 +0000 Total Memory: 2009 M Used Memory: 38 M Linux kernel: 5.10.137-antix.1-686-smp-pae Screen width: 80 Kernel arch: i686 Hardware: Notebook RIM2000 Augenblickliche Bootparameter: lang=de_DE tz=Europe/Berlin quiet splash=v disable=lxF mount=all xorg=nouveau overlay gefunden Lade Hardware spezifische Module ... Prüfe usb,cd Geräte. Suche nach boot Datei(en) antiX/linuxfs Herausgefilterte Geräte /dev/sr0 Versuch wiederholen für 15 Sekunden . Neue(s) Gerät(e) /dev/sdb2 /dev/sdb1 /dev/sdb /dev/sr0 gefunden mount -t vfat -o umask=000,dmask=002,fmask=113,shortname=winnt,uid=1000,gid=1000 /dev/sdb2 /live/boot-dev mount -t ext4 -o ro,noatime /dev/sdb1 /live/boot-dev Eingehängtes boot Gerät. Gerät /dev/sdb1 eingehängt auf /live/boot-dev boot Gerät Dateisystem: ext4 boot device model: Flash Disk Spent 1.63 seconds looking for boot file(s) antiX/linuxfs loop times: 0.25 boot device uuid: 862f493d-6951-444f-a3f6-734244b241e7 BOOT_MP: /live/boot-dev SQFILE_DEV: /dev/sdb1 SQFILE_MP /live/boot-dev Starte Generator für Zufallsnummern... Speichere zufälligen seed Mount file /live/boot-dev/antiX/linuxfs at /live/linux mount -t squashfs -o loop,ro /live/boot-dev/antiX/linuxfs /live/linux sqfs_vid: ==== f87b998e0830a50354e045cda4145991 LD_PATH: /live/linux/lib:/live/linux/lib/i386-linux-gnu:/live/linux/usr/lib Loaded 13 module(s) nls_utf8 nls_cp437 uas usb_storage hid_generic uhci_hcd firewire_ohci firewire_core dm_crypt dm_mod overlay battery fotg210_hcd precheck filesystem on /dev/sdb1 Erstellen aufs ram tmpfs bei /live/aufs-ram (1576 MB) /bin/mount -t tmpfs -o size=1576m,noatime tmpfs /live/aufs-ram Mount overlayfs at /live/aufs mount -t overlay overlay -o lowerdir=/live/linux,upperdir=/live/aufs-ram/upper,workdir=/live/aufs-ram/work /live/aufs Load microcode Found one video display device Erstellen /media tmpfs bei /live/aufs/media (10 MB) /bin/mount -t tmpfs -o size=10m,noatime tmpfs /live/aufs/media Erstellen /run tmpfs bei /live/aufs/run (1111 MB) /bin/mount -t tmpfs -o size=1111m,mode=755,nodev,noatime tmpfs /live/aufs/run Erstellen /live tmpfs bei /live/aufs/live (100 MB) /bin/mount -t tmpfs -o size=100m,mode=755,noatime tmpfs /live/aufs/live Run custom code before: /live/custom/antiX/0.sh mount --move /live/aufs-ram /live/aufs/live/aufs-ram mount --move /live/boot-dev /live/aufs/live/boot-dev mount --move /live/linux /live/aufs/live/linux Run custom code after: /live/custom/antiX/0.sh Run custom code before running live init.d scripts: /live/custom/antiX/8.sh Das initrd init Programm brauchte 16.81 Sekunden ======================================================================Windows is like a submarine. Open a window and serious problems will start.
(live-init.log)
Fri Oct 28 05:26:47 CEST 2022 /live/etc/init.d/live-usb-save live-usb-save: Restore state information Restore machine specific state file /etc/udev/rules.d/70-persistent-net.rules Restore machine specific state file /var/lib/connman/wifi_0012f006fa18_574b3233_managed_psk/settings Restore general state file /etc/fstab.mount Restore general state file /var/log/live/persist-save.log Fri Oct 28 05:26:47 CEST 2022 /live/etc/init.d/live-L10n live-L10n: Lokalisierung der Konsole und Zeitzone Einstellung der Zeitzone und der Ortszeit auf Europe/Berlin Einstellung des Gebietsschema auf de_DE.UTF-8 Fri Oct 28 05:26:48 CEST 2022 /live/etc/init.d/live-init live-init: Lokalisierung/Konfiguration X-Window Microcode laden Alle Geräte werden gemountet make-fstab: Remove all dynamic entries from /etc/fstab make-fstab: Create new /etc/fstab make-fstab: Automount /dev/sda1 at /media/antiX-Frugal make-fstab: Automount /dev/sda5 at /media/_home make-fstab: Automount /dev/sda6 at /media/antiX make-fstab: Automount /dev/sda7 at /media/_daten3 make-fstab: Automount /dev/sda8 at /media/_daten4 make-fstab: Automount /dev/sda10 at /media/sda10 make-fstab: Automount /dev/sdb2 at /media/ANTIX-UEFI make-fstab: Put 9 hard drive entries into /etc/fstab make-fstab: Put 1 removable entry into /etc/fstab Repository-Lokalisierung auf Europe/Berlin Menü-Lokalisierung auf /live/etc/init.d/live-init in /etc/skel Einstellung xkb-layout auf de,us Einstellung xkb-model auf pc105 Einstellung xkb-variant auf Einstellung xkb-options auf grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll CONSOLE KEYMAP: /etc/default/keyboard Nach Hardware-spezifischen Video-Module wird gescannt... KMS Video-Modul(e) gefunden nouveau Datei /etc/X11/xorg.conf wird mit nouveau konfiguriert Standardbenutzer demo gefunden Fri Oct 28 05:26:57 CEST 2022 /live/etc/init.d/live-disable-services live-disable-services: Customizing services Disabling some services (L, lean) Disabling more services (X, Xtralean)(slimski.log)
envlang received as: de_DE slimski: waiting for X server to begin accepting connections Giving up. slimski: unable to connect to X serverHope this helps to trace down and find out what’s going on. I believe the line
Message: Advanced graphics data unavailable in console for root.
from inxi output could give some hint. If even inxi cant’t see the needed info, there is something missing obviously.Regards
RobinWindows is like a submarine. Open a window and serious problems will start.
anticapitalista
@Robin – thanks for the feedback.
Do the Debian 5.10 kernels you tried give “a perfecly stable, fast and fluid noveau” like the 5.19 one?
Note to self – this applies to the 686 pae kernel not 64 bit one.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - leaner and meaner.
From my impression with the 5.19 kernel it runs more agile than with the 5.10 kernels, but the difference is not very striking or distinctive. I haven’t seen any issues with the debian default 5.10 kernels. Meanwhile I’ve done a dist upgrade this evening to antiX 22 to this notebook which couldn’t have run even on antiX 21 until now due to nouveau driver failed and no nvidia proprietary 304.137 was installable. Will have to check some details (like suspend/resume etc.), but now everything works fine, fast and fluid as I’ve last seen in antiX 17 on this notebook, even when I had force installed the 304.137 to antiX 19 it didn’t run that smooth than before in 17 since parts of xorg had to be hold back from update for this. Now this lightheartedness is back on this notebook in antiX 22.
Great work, anticapitalista, many thanks for making all this possible! I’ll switch soon from antiX 19 to antiX 22 for everyday work, using for now the default debian kernel 5.19 from the backports.
Windows is like a submarine. Open a window and serious problems will start.
ModdIt
Yesterday with fresh and fully updated antiX 22 Bullseye Live stick, init runit.
Fails to boot on 5x (modern) kernel with a green blank screen on one occasion with message usb hub detected.Installed the antiX experimental kernel, same failure mode.
Legacy kernel boots and works fine. Debian 18 and 19 kernels working without issue.
Presently running on debian Kernel: 5.18.0-4-amd64 x86_64 Up: 2h 26m
CPU: quad core Intel Core i5-2500K (-MCP-) speed/min/max: 2345/1600/3700 MHzNo further time to experiment at present.
Will try to run a series 6 kernel sometime soon.
- You must be logged in to reply to this topic.
