[SOLVED]: Very slo-o-w “acceptance” of posts

Forum Forums News Sid Upgraders [SOLVED]: Very slo-o-w “acceptance” of posts

  • This topic has 27 replies, 10 voices, and was last updated Jul 14-4:29 pm by Brian Masinick.
Viewing 15 posts - 1 through 15 (of 28 total)
  • Author
    Posts
  • #85922
    Member
    stevesr0

    Hi,

    In the past few weeks, I have noticed that after submitting a post, there is a long gap of several minutes before the post is “accepted”.

    Since I run Sid, I am uncertain if it is the result of a bug in a recent full-upgrade or whether it has been noticed by other posters.

    There is no delay in launching posts to read them.

    stevesr0

    • This topic was modified 4 months, 3 weeks ago by Brian Masinick. Reason: SOLVED
    #85923
    Member
    calciumsodium
    Helpful
    Up
    0
    ::

    I see it also. When I submit a post, there is a long delay. I open up another tab and enter the antixforum, and see that my post is already up. But the original tab still has the delay.

    #85925
    Member
    iznit
    Helpful
    Up
    0
    ::

    i am noticing the same as what calciumsodium mentioned

    #85931
    Moderator
    Brian Masinick
    Helpful
    Up
    0
    ::

    i am noticing the same as what calciumsodium mentioned

    I’m seeing this too. One day it was working well; now the problem has been continuing for nearly the entire week, probably most of the past few weeks.

    Brian Masinick

    #85932
    Moderator
    Brian Masinick
    Helpful
    Up
    0
    ::

    The post I just wrote completed faster; hope it’s fixed.

    Brian Masinick

    #85933
    Moderator
    Brian Masinick
    Helpful
    Up
    0
    ::

    Looks like it is working now!

    Brian Masinick

    #85939
    Moderator
    caprea
    Helpful
    Up
    0
    ::

    Not here, the delay already described is still there.

    #85943
    Moderator
    Brian Masinick
    Helpful
    Up
    0
    ::

    Not here, the delay already described is still there.

    It was fairly late in the evening where I live (between 9 PM and midnight) so it was very early morning or near the end of the night antiX time when the response was good. Not sure where the server is located; if it’s in the USA most people were either relaxing or sleeping.

    Brian Masinick

    #85944
    Moderator
    Brian Masinick
    Helpful
    Up
    0
    ::

    I just got another quick entry; it’s 9:40 AM here now.

    Brian Masinick

    #85952
    Forum Admin
    Dave
    Helpful
    Up
    0
    ::

    Very slow for me all the time, sometimes I end up double posting because it times out and I am forced to refresh.
    Noticed that you can click submit and almost immediately the stop button on the browser, then the reload button and the post will be there as well as the text in the reply box. I think it is waiting for validation from the cleantalks system for spam filtering; however I have not done any network sniffing / website diagnostics to verify

    Computers are like air conditioners. They work fine until you start opening Windows. ~Author Unknown

    #85954
    Moderator
    Brian Masinick
    Helpful
    Up
    0
    ::

    Very slow for me all the time, sometimes I end up double posting because it times out and I am forced to refresh.
    Noticed that you can click submit and almost immediately the stop button on the browser, then the reload button and the post will be there as well as the text in the reply box. I think it is waiting for validation from the cleantalks system for spam filtering; however I have not done any network sniffing / website diagnostics to verify

    I see it also. When I submit a post, there is a long delay. I open up another tab and enter the antixforum, and see that my post is already up. But the original tab still has the delay.

    I just confirmed this behavior.

    Brian Masinick

    #85956
    Moderator
    Brian Masinick
    Helpful
    Up
    0
    ::

    Quick test post with inxi:

    inxi -Fxz
    System:
      Kernel: 5.18.10-1-siduction-amd64 arch: x86_64 bits: 64 compiler: gcc
        v: 12.1.0 Desktop: Xfce v: 4.16.0
        Distro: siduction 21.3.0 Wintersky - xfce - (202112231826)
        base: Debian GNU/Linux bookworm/sid
    Machine:
      Type: Laptop System: Acer product: Aspire A515-55 v: V1.12
        serial: <superuser required>
      Mobo: IL model: Doc_IL v: V1.12 serial: <superuser required> UEFI: Insyde
        v: 1.12 date: 09/07/2020
    Battery:
      ID-1: BAT1 charge: 47.8 Wh (100.0%) condition: 47.8/47.8 Wh (100.0%)
        volts: 12.4 min: 11.2 model: LGC AP18C8K status: full
    CPU:
      Info: dual core model: Intel Core i3-1005G1 bits: 64 type: MT MCP
        arch: Ice Lake rev: 5 cache: L1: 160 KiB L2: 1024 KiB L3: 4 MiB
      Speed (MHz): avg: 1102 high: 1152 min/max: 400/3400 cores: 1: 1088
        2: 1152 3: 1030 4: 1138 bogomips: 9523
      Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
    Graphics:
      Device-1: Intel Iris Plus Graphics G1 vendor: Acer Incorporated ALI
        driver: i915 v: kernel arch: Gen11 bus-ID: 00:02.0
      Device-2: Quanta HD User Facing type: USB driver: uvcvideo bus-ID: 1-5:4
      Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting
        unloaded: fbdev,vesa gpu: i915 resolution: 1920x1080~60Hz
      OpenGL: renderer: Mesa Intel UHD Graphics (ICL GT1) v: 4.6 Mesa 22.1.3
        direct render: Yes
    Audio:
      Device-1: Intel Ice Lake-LP Smart Sound Audio vendor: Acer Incorporated ALI
        driver: snd_hda_intel v: kernel bus-ID: 00:1f.3
      Sound Server-1: ALSA v: k5.18.10-1-siduction-amd64 running: yes
      Sound Server-2: PulseAudio v: 15.0 running: no
      Sound Server-3: PipeWire v: 0.3.54 running: yes
    Network:
      Device-1: Intel Ice Lake-LP PCH CNVi WiFi driver: iwlwifi v: kernel
        bus-ID: 00:14.3
      IF: wlan0 state: up mac: <filter>
      Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
        vendor: Acer Incorporated ALI driver: r8169 v: kernel port: 3000
        bus-ID: 01:00.0
      IF: enp1s0 state: down mac: <filter>
    Drives:
      Local Storage: total: 119.24 GiB used: 17.25 GiB (14.5%)
      ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLQ128HBHQ-00000
        size: 119.24 GiB temp: 16.9 C
    Partition:
      ID-1: / size: 28.67 GiB used: 17.21 GiB (60.0%) fs: ext4
        dev: /dev/nvme0n1p6
      ID-2: /boot/efi size: 252 MiB used: 692 KiB (0.3%) fs: vfat
        dev: /dev/nvme0n1p1
    Swap:
      ID-1: swap-1 type: partition size: 3.91 GiB used: 32 MiB (0.8%)
        dev: /dev/nvme0n1p2
    Sensors:
      System Temperatures: cpu: 50.0 C mobo: N/A
      Fan Speeds (RPM): N/A
    Info:
      Processes: 213 Uptime: 34m Memory: 3.62 GiB used: 2.04 GiB (56.2%)
      Init: systemd target: graphical (5) Compilers: gcc: 11.3.0 Packages: 2116
      Shell: Bash v: 5.1.16 inxi: 3.3.19

    Brian Masinick

    #85957
    Moderator
    Brian Masinick
    Helpful
    Up
    0
    ::

    The previous post worked immediately; go figure!

    Brian Masinick

    #85962
    Moderator
    Brian Masinick
    Helpful
    Up
    0
    ::

    Testing post with a quick weather snapshot:

    Latest South Carolina Observations/Forecast:

    Plymouth State University Weather Center
    URL Address: https://vortex.plymouth.edu

    South Carolina Observations for Mon Jul 11 at 06:00 PM EDT
    T TD RH WIND GUST ALSTG SLP VIS CLOUDS WX PR6 PR24
    Station F F % deg kts kts in Hg mb mi 100ftCOV in in ID
    GREENVILLE DOWNT 81 66 62 130 at 5 29.96 1013.5 10 30 FEW KGMU
    GREENVILLE/DONAL 81 66 62 80 at 5 29.96 10 30 BKN KGYH
    GREENVILLE/SPART 81 64 58 100 at 4 29.96 1013.3 10 30 BKN KGSP

    Brian Masinick

    #85963
    Moderator
    Brian Masinick
    Helpful
    Up
    0
    ::

    That one went well too; using Firefox Nightly, and I did close one tab on a previous antiX Forum post and open another one.
    Ever since then, response has been good; makes me wonder if adding or switching antiX Forum tabs causes any change in the behavior; crazier things have happened!

    Brian Masinick

Viewing 15 posts - 1 through 15 (of 28 total)
  • You must be logged in to reply to this topic.