- This topic has 1,421 replies, 37 voices, and was last updated May 12-10:07 am by Brian Masinick.
-
Posts
-
Brian Masinick
Thanks Wallon! I’ve been using a couple of my other systems today, but this gives me something to examine; not sure there is much more I can do other than what I’ve already done by keeping a few other kernels available. But your note at least provides me with a plausible example for the frequent problems I’ve seen on that system.
Now I’m back with an OLD system that has a partially broken hinge between the keyboard section and the laptop monitor, but I’ve been able to get more life out of this one with an old 4.9 kernel and a light antiX configuration; here’s a 2008 HP laptop, my oldest current system!
inxi -b System: Host: antix21 Kernel: 4.9.0-279-antix.1-amd64-smp arch: x86_64 bits: 64 Desktop: IceWM v: 2.9.7 Distro: antiX-21-runit_x64-base Grup Yorum 30 October 2021 Machine: Type: Laptop System: Hewlett-Packard product: HP Compaq 2510p Notebook PC v: F.0E serial: <superuser required> Mobo: Hewlett-Packard model: 30C9 v: KBC Version 75.28 serial: <superuser required> BIOS: Hewlett-Packard v: 68MSP Ver. F.0E date: 11/04/2008 Battery: ID-1: C23D charge: 36.7 Wh (49.2%) condition: 74.6/74.6 Wh (100.0%) CPU: Info: dual core Intel Core2 Duo U7600 [MCP] speed (MHz): avg: 933 min/max: 800/1200 Graphics: Device-1: Intel Mobile GM965/GL960 Integrated Graphics driver: i915 v: kernel Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: intel gpu: i915 resolution: 1280x800~60Hz OpenGL: renderer: Mesa DRI Intel 965GM (CL) v: 2.1 Mesa 20.3.5 Network: Device-1: Intel 82566MM Gigabit Network driver: e1000e Device-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network driver: iwl4965 Drives: Local Storage: total: 74.53 GiB used: 3.62 GiB (4.9%) Info: Processes: 172 Uptime: 5m Memory: 1.93 GiB used: 325.9 MiB (16.5%) Shell: Bash inxi: 3.3.21--
Brian Masinick
matheus
Hello, today i’am in my Raspberry Pi 4 with 04GB of RAM and Raspberry Pi OS aarch64 (based on Debian). I wish I was using Devuan, but unfortunately its performance sucks.
$ sudo inxi -Fxxz System: Kernel: 5.15.61-v8+ aarch64 bits: 64 compiler: gcc v: 10.2.1 Console: tty 0 wm: Mutter DM: LightDM Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 serial: <filter> CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 rev: 3 features: Use -f option to see features bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus ID: N/A chip ID: brcm:fef00700 Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus ID: N/A chip ID: brcm:fef05700 Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Display: server: X.Org 1.20.11 compositor: mutter driver: loaded: modesetting unloaded: fbdev resolution: 1920x1080~60Hz s-dpi: 96 OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 20.3.5 direct render: Yes Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus ID: N/A chip ID: brcm:fef00700 Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus ID: N/A chip ID: brcm:fef05700 Device-3: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio Sound Server: ALSA v: k5.15.61-v8+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> IF-ID-2: wlan0 state: down mac: <filter> Drives: Local Storage: total: 14.84 GiB used: 3.28 GiB (22.1%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB serial: <filter> Partition: ID-1: / size: 14.28 GiB used: 3.25 GiB (22.8%) fs: ext4 dev: /dev/mmcblk0p2 ID-2: /boot size: 255 MiB used: 30.5 MiB (12.0%) fs: vfat dev: /dev/mmcblk0p1 Swap: ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Sensors: System Temperatures: cpu: 48.2 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 192 Uptime: 11m Memory: 3.78 GiB used: 945.2 MiB (24.4%) gpu: 76 MiB Init: systemd v: 247 runlevel: 5 target: graphical.target Compilers: gcc: 10.2.1 alt: 10 Packages: apt: 1422 Shell: Bash v: 5.1.4 running in: lxterminal inxi: 3.3.01CPU =>Intel Core i7-2600 @ 3.40 GHz 04 Cores / 08 Threads.
RAM =>12 Gb DDR3 1333
GPU =>Palit GeForce GT 1030 2Gb GDDR5 (Driver Nvidia Current)
Monitor => Samsung SyncMaster T22A300
Goldentech GT-H61Brian Masinick
Yippee! I got into the antiX 5.10.142 kernel on my Dell Inspiron 5558; it took some experimentation; here’s how I did it:
earlier, I was able to boot in, but I used nomodeset; that had the consequence of not giving me any usable device to get into the X server, but at least I was able to boot, so I verified that indeed the kernel works.
This time, I got in by selecting S and vga=vesa, so I went into single user mode, then issued telinit 5 to go the graphical user mode. I believe this system supports 1366xsomething, so that’s the next thing I’ll do; change the boot video parameter to something this display can support.
I’ll check that using inxi’s “G” option to determine the capabilities, then keep the correct string handy. That ought to do it!
--
Brian MasinickBrian Masinick
Monitor-1: eDP-1 model: LG Display 0x0484 res: 1366×768 hz: 60 dpi: 101; so the correct video resolution to use is 1366×768 for the Dell 5558; noted; now to take some notes to get the correct boot command for that resolution (I knew this once, but it’s a fact long forgotten, but I’ll look it up and then keep this information handy!
--
Brian MasinickBrian Masinick
I also got in with selecting S and vga=vesa on the linux line` with the 5.10.142 kernel, and when I got to the prompt, I just pressed Ctrl-D and went to multi-user mode successfully. Quite a hack, but at least I can get in!
I tried to set the mode to 1366×768 by editing /etc/default/grub, explicitly setting GRUB_GFXMODE to 1366×768, then running update-grub; that alone still doesn’t get it, but booting in single user mode, and then going to multi-user mode with VESA set does appear to work, and once in, inxi -G reports at least that 1366×768 IS the mode; it STILL bugs me that the Liquorix kernels and the version 4 kernels DON’T require any manual boot line hacking whatsoever, but I at least have a way to get in now with the 5.10 kernels as well as the other kernels.
--
Brian Masinick
mikey777
it STILL bugs me that the Liquorix kernels and the version 4 kernels DON’T require any manual boot line hacking whatsoever,
Similarly, the jxself gnu linux libre kernels (versions 4 or 5), which I’m running on an Asus laptop, don’t require any hacking either – they just work.
▪ 32-bit antix19.4-core+LXDE installed on :
- (2011) Samsung NP-N145 Plus (JP04UK) – single-core CPU Intel Atom N455@1.66GHz, 2GB RAM, integrated graphics.
▪ 64-bit antix21-base+LXDE installed on:
- (2008) Asus X71Q (7SC002) – dual CPU Intel T3200@2.0GHz, 4GB RAM. Graphics: Intel Mobile 4 Series, integrated graphics
- (2007) Packard Bell Easynote MX37 (ALP-Ajax C3) – dual CPU Intel T2310@1.46GHz, 2GB RAM. Graphics: Silicon Integrated Systems.Brian Masinick
Brian Masinick
Brian Masinick
Today’s info running Kernel: 5.19.0-9.1-liquorix-amd64 on my Type: Laptop System: Dell product: Inspiron 5558:
inxi -Fxxz System: Kernel: 5.19.0-9.1-liquorix-amd64 arch: x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: IceWM v: 2.9.9 dm: slimski Distro: antiX-21_x64-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: Dell product: Inspiron 5558 v: N/A serial: <superuser required> Chassis: type: 9 serial: <superuser required> Mobo: Dell model: 086DKN v: A00 serial: <superuser required> UEFI: Dell v: A18 date: 12/30/2019 Battery: ID-1: BAT0 charge: 30.1 Wh (100.0%) condition: 30.1/41.4 Wh (72.6%) volts: 16.7 min: 14.8 model: Samsung SDI DELL 07G07587587 serial: <filter> status: full CPU: Info: dual core model: Intel Core i7-5500U bits: 64 type: MT MCP arch: Broadwell level: v3 rev: 4 cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB Speed (MHz): avg: 2397 high: 2401 min/max: 500/2401 boost: enabled cores: 1: 2398 2: 2397 3: 2395 4: 2401 bogomips: 19157 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Graphics: Device-1: Intel HD Graphics 5500 vendor: Dell driver: i915 v: kernel arch: Gen-8 ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:1616 Device-2: NVIDIA GK208BM [GeForce 920M] vendor: Dell driver: N/A arch: Kepler pcie: speed: 5 GT/s lanes: 4 bus-ID: 08:00.0 chip-ID: 10de:1299 Device-3: Suyin Integrated_Webcam_HD type: USB driver: uvcvideo bus-ID: 2-5:3 chip-ID: 064e:920b Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: modesetting unloaded: fbdev,vesa gpu: i915 display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1366x768 s-dpi: 96 Monitor-1: eDP-1 model: LG Display 0x0484 res: 1366x768 dpi: 101 diag: 395mm (15.5") OpenGL: renderer: Mesa Intel HD Graphics 5500 (BDW GT2) v: 4.6 Mesa 20.3.5 direct render: Yes Audio: Device-1: Intel Broadwell-U Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:160c Device-2: Intel Wildcat Point-LP High Definition Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9ca0 Device-3: NVIDIA GK208 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: speed: 5 GT/s lanes: 4 bus-ID: 08:00.1 chip-ID: 10de:0e0f Sound Server-1: ALSA v: k5.19.0-9.1-liquorix-amd64 running: yes Network: Device-1: Intel Wireless 3160 driver: iwlwifi v: kernel pcie: speed: 2.5 GT/s lanes: 1 bus-ID: 06:00.0 chip-ID: 8086:08b3 IF: wlan0 state: up mac: <filter> Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 07:00.0 chip-ID: 10ec:8136 IF: eth0 state: down mac: <filter> Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 2-6:4 chip-ID: 8087:07dc Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: running rfk-block: hardware: no software: yes address: <filter> Drives: Local Storage: total: 447.13 GiB used: 21.28 GiB (4.8%) ID-1: /dev/sda vendor: Kingston model: SA400S37480G size: 447.13 GiB speed: 6.0 Gb/s serial: <filter> Partition: ID-1: / size: 78.19 GiB used: 21.27 GiB (27.2%) fs: ext4 dev: /dev/sda6 ID-2: /boot/efi size: 98.4 MiB used: 7.4 MiB (7.5%) fs: vfat dev: /dev/sda1 Swap: ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2 Sensors: System Temperatures: cpu: 55.0 C mobo: N/A sodimm: SODIMM C Fan Speeds (RPM): cpu: 2200 Info: Processes: 169 Uptime: 1h 5m Memory: 7.68 GiB used: 1.89 GiB (24.6%) Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Packages: pm: dpkg pkgs: 1602 Shell: Bash v: 5.1.4 running-in: roxterm inxi: 3.3.21--
Brian MasinickBrian Masinick
Hooray! I’m in the process of replacing my Acer Aspire A515-55 with ” HP 14 Laptop, AMD Ryzen 5 5500U, 8 GB RAM, 256 GB SSD Storage, 14-inch Full HD Display, Windows 11 Home, Thin & Portable, Micro-edge & Anti-glare Screen, Long Battery Life (14-fq1025nr, 2021)”, ordering through Amazon, expecting it Thursday, September 22 – Friday, September 23.
The Acer Aspire A515-55 had a 10th generation Intel core i3 processor and it was reasonably responsive, but I had a lot of trouble with the Acer Firmware and system configuration tool. From the very beginning, it took me a couple of weeks to figure out how to enable AHCI capabilities so that I could replace Windows 10 with a few Linux distributions. Then, when I did, most of the time when I inserted a USB, unless it was formatted only a certain way, a tool they had called “Linpus” would come up, but half of the time, it wouldn’t even detect the USB Flash drive I was inserting, so when I’d run our Live USB Maker, for instance, this was a big problem. If I created everything using only the dd capabilities, SOMETIMES I’d have better results, but not always; it got tiring figuring out when things would work and when they wouldn’t.
To add insult to injury, the configuration tool got obscured and I couldn’t access it for quite a while (months). I wanted it back, scoured through on-line documents and finally found a way to get it back, only to discover that when I did, I had it password protected; I looked everywhere, including the original box to see if I had the written password saved somewhere; still haven’t found it, so I decided to get rid of this system entirely. Performance is decent when it is working properly, but it has the worst system BIOS/ control center of any system I’ve used throughout my lifetime.
A friend of mine told me that the AMD Ryzen 5 5500U system is a much more price/performance capable model, and the other old HP systems I have in the corner have easy to use BIOS units, so I’m looking forward to the change; should have it here by Friday!
--
Brian MasinickBrian Masinick
Naturally one of the first things I’ll do is replace Windows 11 with some Linux distributions, but I may take it for a quick spin before saying “Adios!” 🙂
--
Brian MasinickBrian Masinick
Using EndeavourOS for a bit on my Dell Inspiron 5558 laptop:
inxi -zv4 System: Kernel: 5.19.9-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 Desktop: Xfce v: 4.16.1 Distro: EndeavourOS base: Arch Linux Machine: Type: Laptop System: Dell product: Inspiron 5558 v: N/A serial: <superuser required> Mobo: Dell model: 086DKN v: A00 serial: <superuser required> UEFI: Dell v: A18 date: 12/30/2019 Battery: ID-1: BAT0 charge: 30.1 Wh (100.0%) condition: 30.1/41.4 Wh (72.6%) volts: 16.7 min: 14.8 model: Samsung SDI DELL 07G07587587 status: full CPU: Info: dual core model: Intel Core i7-5500U bits: 64 type: MT MCP arch: Broadwell rev: 4 cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB Speed (MHz): avg: 798 min/max: 500/3000 cores: 1: 798 2: 798 3: 798 4: 798 bogomips: 19161 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Graphics: Device-1: Intel HD Graphics 5500 vendor: Dell driver: i915 v: kernel arch: Gen-8 bus-ID: 00:02.0 Device-2: NVIDIA GK208BM [GeForce 920M] vendor: Dell driver: nouveau v: kernel arch: Kepler bus-ID: 08:00.0 Device-3: Suyin Integrated_Webcam_HD type: USB driver: uvcvideo bus-ID: 2-5:3 Display: x11 server: X.Org v: 21.1.4 driver: X: loaded: intel,modesetting gpu: i915 resolution: 1366x768~60Hz OpenGL: renderer: Mesa Intel HD Graphics 5500 (BDW GT2) v: 4.6 Mesa 22.1.7 direct render: Yes Network: Device-1: Intel Wireless 3160 driver: iwlwifi v: kernel bus-ID: 06:00.0 IF: wlan0 state: up mac: <filter> Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 v: kernel port: e000 bus-ID: 07:00.0 IF: enp7s0 state: down mac: <filter> Device-3: Intel Bluetooth wireless interface type: USB driver: btusb bus-ID: 2-6:4 Drives: Local Storage: total: 447.13 GiB used: 17.93 GiB (4.0%) ID-1: /dev/sda vendor: Kingston model: SA400S37480G size: 447.13 GiB Partition: ID-1: / size: 78.19 GiB used: 17.92 GiB (22.9%) fs: ext4 dev: /dev/sda5 ID-2: /boot/efi size: 98.4 MiB used: 7.4 MiB (7.5%) fs: vfat dev: /dev/sda1 Info: Processes: 167 Uptime: 31m Memory: 7.68 GiB used: 1.92 GiB (25.1%) Init: systemd Compilers: gcc: 12.2.0 Packages: 851 Shell: Bash v: 5.1.16 inxi: 3.3.21--
Brian MasinickBrian Masinick
Back to antiX:
pinxi -v5 System: Host: Brian Kernel: 5.19.0-10.1-liquorix-amd64 arch: x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: IceWM v: 2.9.9 Distro: antiX-21_x64-full Grup Yorum 31 October 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: Dell product: Inspiron 5558 v: N/A serial: <superuser required> Mobo: Dell model: 086DKN v: A00 serial: <superuser required> UEFI: Dell v: A18 date: 12/30/2019 Battery: ID-1: BAT0 charge: 30.1 Wh (100.0%) condition: 30.1/41.4 Wh (72.6%) volts: 16.7 min: 14.8 model: Samsung SDI DELL 07G07587587 status: full Memory: RAM: total: 7.68 GiB used: 1.03 GiB (13.4%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: dual core model: Intel Core i7-5500U bits: 64 type: MT MCP arch: Broadwell rev: 4 cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB Speed (MHz): avg: 2400 high: 2401 min/max: 500/2401 boost: enabled cores: 1: 2397 2: 2401 3: 2401 4: 2401 bogomips: 19156 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Graphics: Device-1: Intel HD Graphics 5500 vendor: Dell driver: i915 v: kernel arch: Gen-8 bus-ID: 00:02.0 Device-2: NVIDIA GK208BM [GeForce 920M] vendor: Dell driver: N/A arch: Kepler bus-ID: 08:00.0 Device-3: Suyin Integrated_Webcam_HD type: USB driver: uvcvideo bus-ID: 2-5:3 Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 resolution: 1366x768~60Hz OpenGL: renderer: Mesa Intel HD Graphics 5500 (BDW GT2) v: 4.6 Mesa 20.3.5 direct render: Yes Audio: Device-1: Intel Broadwell-U Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:03.0 Device-2: Intel Wildcat Point-LP High Definition Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 Device-3: NVIDIA GK208 HDMI/DP Audio driver: snd_hda_intel v: kernel bus-ID: 08:00.1 Sound API: ALSA v: k5.19.0-10.1-liquorix-amd64 running: yes Network: Device-1: Intel Wireless 3160 driver: iwlwifi v: kernel bus-ID: 06:00.0 IF: wlan0 state: up mac: b4:6d:83:44:f0:02 Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 v: kernel port: e000 bus-ID: 07:00.0 IF: eth0 state: down mac: 20:47:47:d5:7c:0f Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 2-6:4 Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: running rfk-block: hardware: no software: yes address: B4:6D:83:44:F0:06 Drives: Local Storage: total: 447.13 GiB used: 22.06 GiB (4.9%) ID-1: /dev/sda vendor: Kingston model: SA400S37480G size: 447.13 GiB Optical-1: /dev/sr0 vendor: PLDS model: DVD+-RW DU-8A5LH rev: DD11 dev-links: cdrom,cdrw,dvd,dvdrw Partition: ID-1: / size: 78.19 GiB used: 22.05 GiB (28.2%) fs: ext4 dev: /dev/sda6 label: rootantiX21 uuid: dadd5816-6e4a-468d-93ea-6639bf91d990 ID-2: /boot/efi size: 98.4 MiB used: 7.4 MiB (7.5%) fs: vfat dev: /dev/sda1 label: BOOT uuid: 31E2-D091 Swap: ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) dev: /dev/sda2 label: N/A uuid: 84f71f56-aca6-4e58-823b-e74e372f3eda Sensors: System Temperatures: cpu: 45.0 C mobo: N/A sodimm: SODIMM C Fan Speeds (RPM): cpu: 2200 Info: Processes: 150 Uptime: 11m Init: SysVinit runlevel: 5 Compilers: gcc: 10.2.1 Packages: 1604 Shell: Bash v: 5.1.4 pinxi: 3.3.21-16--
Brian MasinickBrian Masinick
I finally found a reliable, reproducible solution to my stuck antiX boots with the 5.10 kernel series.
Though once in a great while they just work, a reliable way, particularly on my Dell Inspiron 5558 laptop is to go into /etc/default/grub, eg.
sudo geany /etc/default/gruband search for GRUB_CMDLINE_LINUX_DEFAULT=”quiet”; change it to GRUB_CMDLINE_LINUX_DEFAULT=”nofb” instead, and for
good measure, setGRUB_GFXMODE=1024x768x32,auto set GFXPAYLOAD=keepsave the file, and run `sudo update-grub’ and then /boot/grub/grub.cfg should contain
linux /boot/vmlinuz-5.10.142-antix.2-amd64-smp root=UUID=dadd5816-6e4a-468d-93ea-6639bf91d990 ro nofb
or something similar for the antiX kernels; it doesn’t hurt any of them, but it ensures that the 5.10 kernels will boot without the framebuffer, which has been causing problems, as I discovered when I took off the quiet flag.Problem solved.
--
Brian MasinickBrian Masinick
Reference that confirmed my suspicion: https://support.digium.com/community/s/article/How-to-disable-the-Linux-frame-buffer-if-it-s-causing-problems
(there are other similar articles available too).--
Brian Masinick
- You must be logged in to reply to this topic.
